RIV-TI TUBTARA blind rivet nuts - Titgemeyer GmbH 6 6 7 steel 8 8 4 4 4 5 stainless aluminium steel aluminium ... Riv-Ti® rivet nuts are a combination of rivet and nut. ... Diameter

● thick walled for greater strength● chamfered for easy insertion● round, hex and raised spline bodies● flat, countersunk and slim heads

Riv

-Ti T

ubta

ra T

b136

9TU

K(1

005)

1

RIV-TI® TUBTARAblind rivet nuts

Fastening Technology

9

10

13

14

6

6

7

steel

8

8

4

4

4

5

stainless

aluminium

steel

aluminium

steel

brass

stainless

aluminium

steel

stainless

aluminium

steel

steel

steel

stainless

stainless

steel

stainless

steel

stainless

10

11

steel

18

19

steel 17

15

16

20

2

11

12

aluminium

steel

steel 23

22

24

21

(UK) LTD - Tel.:+44(0)121-557-9777 - Fax:+44 (0)121-557-4777 - [email protected] - www.titgemeyer.co.uk

RIV-TI®

blind rivet nuts

Round Body Flat Head Open End

Closed End

Countersunk Head

Slim Head

Open End

Closed End

Open End

Closed End

Part Hex Body Flat Head Open End

Slim Head Open End

Hexagon Body Flat Head Open End

Slim Head

Closed End

Raised Spline Round Body

Flat Head

Countersunk Head

Round Body Flat Head + Seal

Open End

Closed End

Open End

Open End

Closed End

RIV-TI® Blind Rivet Studs

3(UK) LTD - Tel.:+44(0)121-557-9777 - Fax:+44 (0)121-557-4777 - [email protected] - www.titgemeyer.co.uk

RIV-TI®blind rivet nuts

VerastileRiv-Ti® rivet nuts are a combination of rivet and nut. You can fasten with it, to it - or both.

Riv-Ti® rivet nuts are perfect for use in high volume production or for prototypes. They are installed from one side of the application using simple and effective power or hand tools.

InstallationRiv-Ti® rivet nuts are easy and quick to install.They are energy efficient, produce no fumes and do not require the assembly to be cleaned after installation. They can be installed after components have been painted or otherwise coated without damaging the surface finish.

VarietyRiv-Ti® rivet nuts are available in aluminium, steel, brass and stainless steel with thread sizes fromM3 to M12 and can be installed in material from 0.25 mm to 8 mm thick.

They can have round, hexagonal or raised spline body shapes with flat, countersunk or slim head styles and open or closed ends.

Special parts are also possible depending on the quantity required. For example special parts can have underhead ribs, extra-large heads, extra-thick heads or stand-off heads to eliminate the need for spacers.

RIV-TI® Blind Rivet StudsRIV-TI® blind rivet nuts can be supplied to special order as rivet studs. Size range is from M4 to M8.Installation is basically the same as for rivet nuts except that the threaded mandrel on the installation tool is replaced with an internally threaded pulling bolt.

Screw the Riv-Ti®

rivet nut on to the threaded mandrel of the installation tool

Place the rivet nut into the pre-drilledor pre-punchedhole

Operate the tool to install the rivet nut securely in place

Spin the mandrel out of the rivet nut

The Riv-Ti® rivet nut is now readyfor use with a suitable screw or bolt

Aluminium

Steel, zinc and yellow passivate

Brass

1 No lead-in chamfer

Dimensions are in mm and nominal unless stated

We reserve the right to amend specifications at any time

Part NumberSteel Brass

336 223336 453

-

-

336 1811

336 1831

Aluminiumk

Diameterd

Diameter HeightSizeThread

d1

Grip Range Head

4

HoleDiameter

Body Length

L D

0.5 -3.0

s

2.0 - 3.0

0.5 - 2.0 9.8 336 3511

10.8 336 35310.85.1

336 493

3.0 - 4.5 12.3 336 455 336 225

0.5 - 3.0 10.8

-0.86.1

12.0 336 552 336 262 336 592

3.0 - 5.5 15.0 336 554 336 264

336 633 336 713

-

0.5 -3.0 14.5 336 631 336 711 336 671

1.07.1

-

5.5 - 8.0 19.0 336 634 336 714 -

1.59.13.0 - 5.5 16.5

336 817

3.0 - 5.5 18.5 336 773 336 859 -

0.5 -3.0 16.0 336 771 336 857

336 901 336 987

5.5 - 8.0 21.5 336 775 336 860

1.516.011.011.1

3.5 - 6.0 22.8 336 903 336 9892.318.512.412.5

0.8 - 3.5 19.8

0.8 - 3.5 21.0 - 336 988

- 336 011

3.5 - 6.0 24.0 - 336 9902.019.013.013.1

4.0 - 7.0 28.0 _ 336 0122.023.016.016.1

1.0 - 4.0 25.0

-

-

-

-

-

-

-

8.0

10.0

11.0

13.0

5.0

6.0

7.0

9.0

M8

M10

M10

M12

M3

M4

M5

M6


Flat headRound bodyOpen end


Stainless steel



5

d1

Part NumberStainless steel

334 225

334 226

kDiameter

dHeightSize

Thread Grip Range HeadDiameter

Body Length

0.5 - 3.0 11.5

HoleDiameter

7.1

5.0 -7.0

M8

3.0 - 5.0

D

2.0 - 3.5

0.5 - 2.0 11.0

12.56.06.1

Ls

334 266

334 2677.0

0.5 -3.0 14.5 334 716

10.0 1.03.0 - 5.0 15.0

334 717

18.5 -

1.5

1.53.0 - 5.5 18.5

16.0

M4

M5

334 856

1.09.0

0.5 -3.0 334 85511.1 11.0 15.0

M100.8 - 3.0

12.1 12.03.0 - 5.0

18.515.0 1.0

334 985

20.5 334 986

M6 9.1 9.0 12.016.5


Flat headRound bodyOpen end


Aluminium




M8

M6

336 751 336 837

3.0 - 5.5 25.5 336 753 336 83911.0

22.516.0 1.5

336 611 336 691

336 613 336 69313.0 1.5

0.5 - 3.0

6.0 10.0 0.8

7.018.0

11.0336 532 336 242

6

M5

0.5 - 3.011.1

336 534 336 2443.0 - 5.57.1

Diameter

M40.5 - 3.0

3.0 - 4.56.1

HeightSizeThread

d1

Grip Range

s

HeadBody Hole Part Number

kDiameter

dDiameterLength

L DAluminium Steel

336 433

- 336 205

336 203

1.020.5

14.8

0.5 - 3.09.1 9.0

21.5

3.0 - 5.5 24.5

16.3


Flat headRound bodyClosed end


Stainless steel



Stainless steelHeadBody Part Number

kDiameter

dDiameterLength

L Dd1

Grip Range

s

7

23.5

HoleDiameter

21.5

HeightSizeThread

12.0 1.5 334 691M6 0.5 - 3.0 9.1 9.0

15.0 1.5 334 841M8 0.5 - 3.0 11.1 11.0


Flat headRound bodyClosed end


Aluminium


1 No lead-in chamfer



1.54.0 - 6.5 16.0

1.7 - 4.59.1 9.0

17.012.0 1.5

4.5 - 6.5

336 231

336 563 336 273

6.1 6.0 9.0 1.5

7.1 7.013.0

Part Number

kDiameter

dDiameterLength

L DAluminium SteelHeightSize

Thread

d1

Grip Range

s

HeadBody HoleDiameter

M43.5 - 5.0 13.0

336 561 336 271

8

M5

1.7 - 4.511.1

336 465 336 235

10.0

336 641 336 721

19.0 336 642 336 722

336 781 336 867

4.5 - 6.5 21.0 336 782 336 86811.0

19.014.0 1.5M8

M6

M3 1.7 - 3.5

1.7 - 4.0

1.5 336 3611 336 1911

1.7 - 3.5

5.1 5.0 11.3 8.0

11.5 336 461

M101.7 - 4.5

12.5 12.4336 997

4.5 - 6.5 23.0 336 912 336 998

21.015.4 1.5

336 911

M122.0 - 4.5

16.1 16.0336 021

4.5 - 7.5 29.0 - 336 022

26.019.0 1.8

-


Countersunk headRound bodyOpen end


Stainless steel



9.0 1.0 334 276M5 1.2 - 3.5 7.1 7.0

8.0 1.0 334 236M4 1.2 - 3.0 6.1 6.0

9

12.0

HoleDiameter

12.0

HeightSizeThread

d1

Grip Range

s

HeadBody Part Number

kDiameter

dDiameterLength

L DStainless steel

M6 1.7 - 4.5 9.1 9.0 17.0 12.0 1.5 334 726

M81.7 - 4.5

11.1 11.04.5 - 6.5 19.5

334 865

334 864

17.514.0 1.5

M10 1.7 - 4.5 12.1 12.0 20.0 15.0 1.5 334 994


Countersunk headRound bodyOpen end


Aluminium




1.54.0 - 6.5 20.5

1.7 - 4.59.1 9.0

22.012.0 1.5

4.5 - 6.5

336 251

336 2156.1 6.0 9.0 1.5

7.1 7.018.0

10.0

Thread

d1

Grip Range

s

11.1

15.5

HeightSizek

Diameterd

DiameterLengthL

M4

M5

1.7 - 3.5

3.5 - 5.0

1.7 - 4.0

HoleDiameter


D

336 701

24.0 336 622 336 702

Aluminium Steel

336 211

336 253

336 847

4.5 - 6.5 28.0 336 762 336 84811.0

25.014.0 1.5

1.7 - 4.5

10

M8

M6

336 441

336 445

336 541

336 543

336 761

336 621

17.0


Countersunk headRound bodyClosed end


Aluminium




9.5 0.5335 473 335 293

335 474 335 2949.1 9.0

3.0 - 5.5 16.5

14.50.5 - 3.0

Part Number

kDiameter

dDiameterLength

L DHeight

HeadSizeThread

d1

Grip Range

s

Body

12.0

HoleDiameter

10.8

3.0 - 5.5 15.0

M6

6.5 0.5M4 0.5 - 3.0 6.1 6.0

0.5 - 3.0M5 7.1 7.0

Aluminium Steel

335 443 335 263

7.5 0.5335 453 335 283

- 335 284

M80.5 - 3.0

11.1 11.0335 303

3.0 - 5.5 18.5 - 335 304

16.011.5 0.5

335 483

M10 0.8 - 3.5 12.5 12.4 335 313

11

19.5 12.9 0.5 -


Slim headRound bodyOpen end


Stainless steel



334 304

12

HoleDiameter

HeadBody

0.5 - 3.0M5

M6 0.5 - 3.0

Part Number

DLength

L

0.5 - 2.0

7.1

Stainless steel

334 260M4

Thread

d1

Grip Range

sSize

7.0 12.0 7.5

0.5

Heightk

Diameterd

Diameter

6.1 6.0 11.0 6.5

14.59.1 9.0 9.5

16.011.5 0.5

3.0 - 5.5 18.5M8

0.5 - 3.011.1 11.0

334 303

0.5

0.5 334 293

334 283


Slim headRound bodyOpen end





13

335 242

7.5 0.5

9.5 0.5

6.5 0.5

335 252

335 276

7.1 7.0

M6 9.1 9.0

M4 0.5 - 3.0 6.1 6.0

18.0

HoleDiameter

15.0

0.5 - 3.0 21.5

0.5 - 3.0M5

HeightSizeThread

d1

Grip Range

s


kDiameter

dDiameterLength

L DSteel

335 306M8 0.5 - 3.0 11.1 11.0 11.5 0.522.5


Slim headRound bodyClosed end


Stainless steel



0.5

0.5

9.1

Stainless steel

334 383

334 393

Heightk

DiameterThread

d1

Grip Range

sSize

Part Number

D

0.5 - 3.0M6

DiameterLengthL

9.0 21.5 9.5

14

M5 0.5 - 3.0 7.1 7.0 18.0 7.5

Hole HeadBody Diameter

d


Slim headRound bodyClosed end


Stainless steel



15.0 1.516.0M8 0.5 - 3.0 11.1 11.0

A/FSW

DiameterLengthL D

HeightSizeThread

d1

Grip Range

s

HeadBody

k

11.5

HoleA/F

11.0

0.5 - 3.0 14.5

0.5 - 3.0M5

9.0 1.0M4 0.5 - 2.0 6.1 6.0

7.1 7.0

M6 9.1 9.0

10.0 1.0

12.0 1.5

15

Part NumberStainless steel

334 135

334 155

334 175

334 185


Flat headPart Hex bodyOpen end


Stainless steel



Part Number

SW1

16

M4 0.5 - 2.0 6.1 6.0 11.0 6.5

HoleA/F

HeadBody A/FLength

L

Thread

d1

Grip Range

sSize

SW

7.0 12.0 7.5M5

0.5

7.1

Stainless steel

334 142

334 162

Heightk

A/F

0.5

0.5 - 3.0 14.5

0.5 - 3.0

0.5 - 7.0

M6 9.1 9.03.0 - 5.0

18.5 -

9.5 0.5

334 182

16.5 334 183

M8 0.5 - 3.0 11.1 11.0 16.0 11.5 0.5 334 192


Slim headPart Hex bodyOpen end





16.5

SWDiameterLength

L D

9.0

10.0

HeightSizeThread

d1

Grip Range

s

HeadBody

k

13.0

HoleA/F

10.0

14.5

0.5 - 3.0M5

A/F

1.0M4 0.5 - 2.0 6.1 6.0

7.1 7.0

M60.5 - 3.0

9.1 9.03.0 - 5.5

1.0

13.0 1.5

17

339 262

339 711

339 713

Part NumberSteel

339 222

M80.5 - 3.0

11.1 11.03.0 - 5.5

16.516.0 1.5

339 857

19.0 339 859

M100.8 - 3.5

13.1 13.03.5 - 6.0

21.019.0 2.0

339 987

23.5 339 989

M12 1.0 - 4.0 16.1 16.0 25.0 23.0 2.0 339 998


Flat headHexagon bodyOpen end





27.0 339 838

M10 0.8 - 3.5 13.1 13.0 31.0 19.0 2.0 339 970

339 693

M80.5 - 3.0

11.1 11.03.0 - 5.5

24.516.0 1.5

339 837

Part Number

D

18

M4 0.5 - 2.0 6.1 6.0 14.5 9.0

HoleA/F

HeadBody DiameterLength

LHeight

kA/F

Thread

d1

Grip Range

sSize

1.0

19.0

SWSteel

339 202

339 243

21.5

21.510.0 1.0

339 242

13.0 1.5339 691

23.5M6 9.1 9.0

M5 7.13.0 - 5.5

7.0

0.5 - 3.0

0.5 - 3.0

3.0 - 5.5


Flat headHexagon bodyClosed end





M6 9.1 9.0

A/FLengthL SW1

11.00.5 - 2.0 6.1

HeightSizeThread

d1

Grip Range

s

HeadBody

k

14.0

HoleA/F A/F

SW

16.00.5 - 3.0

M4 6.0

M50.5 - 3.0

7.1 7.03.0 - 5.5 16.5

19

Part NumberSteel

7.7 0.6

6.6 0.6

0.7

3.0 - 5.5 18.59.8 0.7

M80.5 - 3.0

11.1 11.03.0 - 5.5 20.5

18.011.8

23.0 13.8 0.7M10 0.8 - 3.5 13.1 13.0

339 812

339 957

339 959

339 991

339 322

339 362

339 363

339 811


Slim headHexagon bodyOpen end





M8 0.5 - 3.0 11.1 11.0

M6 0.5 - 3.0 9.1 9.0 339 911

25.0 339 967

22.0 9.8 0.7

11.8 0.7

339 4620.70.5 - 3.0M5 7.1 7.0 20.0 7.7

SWSteel

339 4220.6

Thread

d1

Grip Range

sSize A/F

HeadBody A/FLength

LHeight

kA/F

Part Number

SW1

20

M4 0.5 - 2.0 6.1 6.0 15.5 6.6

Hole


Slim headHexagon bodyClosed end





19.818.5 2.2

337 920

22.8 337 921M10

0.8 - 3.513.0 12.9

3.5 - 6.0

11.416.0

16.0 1.518.5

14.513.0 1.5

337 910

16.5 337 911

M4 6.4 6.3

M60.5 - 3.0

9.4 9.33.0 - 5.5

7.3

DiameterLengthL D

HeightSizeThread

d1

Grip Range

s

HeadBody

k

HoleDiameter

3.0 - 4.5

M50.5 - 3.0

7.43.0 - 5.5

3.0 - 5.5

Diameterd

10.80.5 - 3.0

21

Part NumberSteel

337 9000.8

1.015.0

12.011.0

M80.5 - 3.0

11.5

337 901

337 905

337 906

337 916

337 915

12.310.0


Flat headRaised spline round bodyOpen end





19.014.0

1.5

337 945

1.5337 950

337 951

6.4 6.311.5

9.013.0

337 946

21.015.4

4.5 - 6.51.5

21.0

4.5 - 6.5 23.012.9

11.4

M101.7 - 4.5

13.0

M81.7 - 4.5

11.5

337 940

19.0 337 941M6

1.7 - 4.59.4 9.3

4.5 - 6.5

17.012.0

1.7 - 4.07.4 7.3

13.0

16.04.0 - 6.510.0

1.5337 930

337 931

1.5337 936

Part Number

D

22

1.7 - 3.5

HoleDiameter

HeadBody DiameterLength

L

Thread

d1

Grip Range

sSize

M5

Steel

3.5 - 5.0

337 935

M4

Heightk

Diameterd


Countersunk headRaised spline round bodyOpen end



Seal - black silicon-free NBR70

Seal totally enclosed - gas and fluid tight

Great resistance to turning

Inner and outer parts of head are in contact with the application;this prevents deformation of the application especially in thin materials

Temperature range: - 40 C to + 80 C continuous- 40 C to + 190 C for 30 minutes maximum



M5

d1

0.5 - 3.0

M6 0.5 - 3.0

7.1

M8 0.5 - 1.5

D

HoleHeightSize

Thread Grip Range HeadBody DiameterLength

s LA/FSW

A/F

1.5

1.5

Part NumberSteel

339 245

k

9.1

23

339 69515.0

2.0 339 850

12.5

9.0 21.5

7.0 19.0

11.1 11.0 24.5 20.0

RIV-TI®blind rivet nuts with seal

Flat head with sealHexagon bodyClosed end


M12 - 82.0 -

M10 27.0 48.0 -

M8 17.0 24.0 24.0

M6 8.0 10.0 10.0

M5 4.5 6.0 6.0

M4 2.0 3.0 3.0

M3 1.0 1.2 -

Thread Aluminium Steel Stainless

Maximum Tightening Torque Nm

Thread Pull Out Strength N

M12 - 75000 -

M10 17500 31000 -

18000

M8 13500 25000 25000

7000

M5 5500 9000 9000

Stainless

M3 3000 5000 -

24

Thread Aluminium Steel

M4 4000 7000

M6 10000 18000


Technical InformationThe figures given are typical test values for guidance only and not to be used as specifications.

Users must satisfy themselves as to the performance of RIV-TI® rivet nuts in their own application.

Titgemeyer application engineers will be happy to advise.


25

RIV-TI® blind rivet nuts INSTALLATION TOOLS

HAND TOOL MS 3For installation of blind rivet nuts

RangeM3 - M5 aluminium or steel

HAND TOOL R1For installation of blind rivet nuts

RangeM4 - M10 aluminium or steelM4 - M6 stainless steel

HAND TOOL MS 7For installation of blind rivet nutsand blind rivet studs

RangeM3 - M6 aluminiumM4 - M5 steelM4 - M5 blind rivet studs

HAND TOOL MS 9For installation of blind rivet nutsand blind rivet studs

RangeM4 - M10M4 - M8 blind rivet studs

POWER TOOL MS 50Hydro-pneumaticFor installation of blind rivet nutsand blind rivet studs

RangeM3 - M10M4 - M8 blind rivet studs

POWER TOOL MS 100Hydro-pneumaticFor installation of blind rivet nuts and blind rivet studs

RangeM8 - M14

FIREBIRD® BATTERY TOOL For installation of blind rivet nuts

RangeM3 - M10 aluminiumM3 - M8 steel


26


InstallationThe key to correct installation is to use the correct part and to produce the correct upset. Set the installation tool according to instructions supplied and check in-situ or using scrap material of the correct total thickness. The correct upset form is shown opposite. When satisfied, lock the tool setting and proceed.

Fig 2Fig 1

To avoid damaging the Riv-Ti® rivet nut threads the tool mandrel must engage all the threads in the rivet nut - see Fig. 1. Ensure one or two threads of the mandrel protrude through the end of the Riv-Ti® rivet nut - see Fig. 2. The tool must be held at right angles to the workpiece.

When installing countersunk head Riv-Ti® rivet nuts do not countersink the material too deep. Always ensure that the tool anvil is the same diameter or slightly smaller then the Riv-Ti® head to avoid ‘bridging’ the hole and causing a loose upset. For optimum performance the head of the Riv-Ti® should be approximately 0.1 mm proud of the surface after installation.

Grip RangeMeasure the total material thickness including paint, burrs, etc. and select a Riv-Ti® with suitable grip range. If the total material thickness is at the upper limit of the grip range, select a longer part. If in doubt ask for advice.

The illustrations show typical installations.

Upset too much

Upset correct

Upset too little

Flat headplain hole

Countersunk headcountersunk hole

Countersunk headdimple countersunk

hole


27(UK) LTD - Tel.:+44(0)121-557-9777 - Fax:+44 (0)121-557-4777 - [email protected] - www.titgemeyer.co.uk

TITGEMEYER (UK) LtdA2 Link One Industrial Park - George Henry RoadTipton - West Midlands - DY4 7BUUnited KingdomTel. +44(0)121-557-9777Fax +44(0)[email protected]

Blind Rivets

Threaded Inserts

Assembly Systems

Installation Tools

Documents

RIV-TI TUBTARA blind rivet nuts - Titgemeyer GmbH 6 6 7 steel 8 8 4 4 4 5 stainless aluminium steel aluminium ... Riv-Ti® rivet nuts are a combination of rivet and nut. ... Diameter