Upload
nguyenduong
View
223
Download
5
Embed Size (px)
Citation preview
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
EMI Filters
■ Explanation of Part Numbers
■ Features●
●
■ Recommended Applications●
● Digital audio and Video equipment●
●
●
Noise Filter The first two digits are significant figures of capacitance value and the third one denotes the number of zeroes following
Code
Bulk Packing
Code
B
D
Tolerance
E
1
Product Code Series Nominal Capacitance Value
Suffix forPacking
X
2
C
3
E
4
M
5
T
6
1
7
0
8
3
9 10 11
Temperature Characteristics
EMT T-circuit EMI Filter Packing
C
T Taped & Box
D C
±10 %+20 %Ð30 %
■ Construction ■ Schematic
Ferrite bead
Lead
Cylindrical capacitor
Exterior resin
Capacitor
Ferrite bead
EMI FiltersType: EXCEMT
HDD, PPC, and Communication equipment
Small in size and taped type is availableExcellent noise filtering characteristics using
T-network connections.
Preformed leads provide better solderability
for through-hole P.W.B.
]
Digital equipment Personal Computers,Word Processors, Printers,
AC adapters and Switching Power supplies
Engine controls, Panels and Audio systemsElectronic musical instruments and other digital devices
Rev.02/04
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
EMI Filters
RatedVoltage(V DC)
Part Number(1)
Capacitance(pF)
Tolerance(%)
RatedCurrent(A DC)
(3)
25 dB AttenuationFrequency
(MHz)
(3)
15 dB AttenuationFrequency
(MHz)
50505050505050161616
2247
100220270470
100022003300
10000
800 to 1000450 to 700350 to 550250 to 400250 to 400150 to 350100 to 25050 to 20040 to 16025 to 120
±20±20±20±20±20±20±20±20±20±30
YBYBYBYBYBYBYBYDYDYD
5555555555
600 to 1000400 to 1000250 to 900150 to 500150 to 50070 to 50050 to 40030 to 40025 to 40015 to 400
EXCEMT220B1EXCEMT470B1EXCEMT101B1EXCEMT221B1
EXCEMT271B1EXCEMT471B1EXCEMT102B1EXCEMT222D1
EXCEMT332D1
EXCEMT103D1
(2)
TemperatureCharacteristics
Category Temperature Range (Operating Temp. Range): Ð25 ¡C to +85 ¡C
Lead Cut Type: C, Taped Type: T(1) Measurement Tepmerature: +20 °C, Measurement Frequency: 1 kHz(2) Temperature Characteristics YB: Maximum capacitance change is ±10 % over the temperature range of –25 °C to +85 °C in reference to +20 °C
YD: Maximum capacitance change is +20, –30 % over the temperature range of –25 °C to +85 °C in reference to +20 °C(3) Measurement Temperature: +20 °CNote: Please inquire to the particular capacitance value, on a range of 22 to 10000 pF.
■ Ratings
■ Standard Lead Taping in mm (not to scale)
2.5 max.
12.7±0.2 f4.0±0.2
18.0
±0.
5
11 m
ax.
3.85±0.50
5.0±0.57 m
ax.
19.0
±1.
0
9.5±
1.0
471
471
471
■ Dimensions in mm (not to scale)
6.5 max.
2.5±0.5
4.5±
1.07
max
.
Capacitance
2.5 max.
f0.50±0.05
Center lead only f 0.45±0.05
471
2.5±0.5
■ Typical Attenuation Characteristics
0
20
40
60
801 M 5 M 10 M 50 M 100 M 500 M 1 G
Frequency (Hz)
Atte
nuat
ion
(dB
)
103 332 222
102471
271221
101470
220
Measurement Circuit
50 W
50 W~
Sample
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
EMI Filters
■
Part Number Standard Quantity Style Weight (mg/pcs.)
EXCEMT1111C 200 pcs./Bag Bulk 216
EXCEMT1111T 2000 pcs./Box Flat box 291
●
●●●●
●●
●●
Packaging Specifications
Safety PrecautionsThe filter may fail in a short-circuit mode (or open-circuit mode) when subjected to severe conditions of electrical and/or environmental stresses beyond their specified rating. Burnout or glowing may result in the worst case.Soldering Flux: Use rosin type or nonhalogen type flux.
Avoid contact with static electricity.Filter characteristics may deteriorate if subjected to surge or other abnormal voltage. Excessive mechanical stress may damage the components. Handle with care.
Before ordering, test sample components in your application to ensure proper function and compatibility.
rapid changes of temperature and humidity.
Cleaning Solvent: Use alcohol based solution. Consult with us before using any other type of cleaning agent.
Store under temperatures ranging from Ð5 ¡C to +40 ¡C and relative humidity from 40 % to 60 %. Avoid
Use the components within one year of delivery.