Embed Size (px)
Citation preview
EMPLOYEES’ STATE INSURANCECORPORATION
SUPER SPECIALITY HOSPITAL
SANATHNAGAR, HYDERABAD-500038
E-TENDER FOR NEUROSURGERY IMPLANTS
Not Transferable
Tender form S No._______
Receipt No.________
Date: _____________
EMPLOYEES’ STATE INSURANCE CORPORATION
SUPER SPECIALITY HOSPITAL SANATH NAGAR, HYDERABAD – 500 038
Ph. No. 040-23811244 E-mail: [email protected]
523-U-16-30/Neurosurgery Implants/2018-2019 Date: 26/02/2019
E-TENDER NOTICE
E-TENDER APPLICATION IS AVAIALABLE FROM: 26/02/2019 from 11.00 am
onwards
Sub: E-Tendering for Supply and Installation of NEUROSURGERY IMPLANTS - Reg
E-Tender in two bid system is invited for the supply of Neurosurgery implants as per the
specifications enclosed by the Department of Neurosurgery. Sealed bids are invited from the
eligible manufacturers/ distributers/ authorized agents under two bid system i.e. Technical bid
and Price bid. Technical Bid should consist all the technical details along with commercial
Terms & conditions & Price Bid should indicate the price of the items mentioned in technical
bid. FOR
DEPARTMENT NEUROSURGE
RY
IMPLANT NAME
QUANTITY
EMD
LAST DATE OF SUBMISSION
TYPE OF TENDER
PRE BID MEETING
1
Neurosurgery
Implants
(Annexure-D)
As
mentioned in the tender
30000
14/03/2019 01.00 PM
Fresh
tender and e-
tender
04/03/2019 at 2.30
PM
Detailed information regarding the items, application / tender forms, EMD details, specifications,
terms and conditions can be downloaded from the following websites: www.esic.nic.in and CPP
portal. The interested bidders shall submit their tender(s) only through online mode at the e-
procurement portal https://esictenders.eproc.in.
In addition to e-tender which has to be filled online, the bidders are also required to submit hard
copies of only Earnest Money Deposit (EMD) and undertaking.
For all practical purposes, the e-tender shall be considered for evaluation. Any corrigendum to this
tender will be notified through the aforesaid websites only. The undersigned reserves the right to
accept or reject any or all the bids without assigning any reason at any stage. If the date of opening
of tender happens to be a holiday, the tender will be opened on the next working day. Hard copies
of only Earnest Money Deposit (EMD) and undertaking should be dropped on or before the date and
time mentioned above, in the tender box kept at the SECOND FLOOR, ESIC super speciality hospital,
Sanathnagar, Hyderabad
DEAN
IMPORTANT INSTRUCTIONS FOR BIDDERS All bidders/contractors are required to procure Class-IIIB Digital Signature Certificate (DSC) with both DSC Components i.e. Signing & Encryption to participate in the E-Tenders. Bidders should get registered at https://esictenders.eproc.in. Bidders should add the below mentioned sites under Internet Explorer tools Internet Options Security Trusted Sites sites of Internet Explorer : https://esictenders.eproc.in https://www.tpsl-india.in https://www4.ipg-online.com Also, Bidders need to select “Use TLS 1.1 and Use TLS 1.2” under Internet Explorer Tools internet Options Advanced Tab security. Bidder needs to submit Bid Processing Fee charges of Rs. 2495/- (non-refundable) in favour of M/s. C1 India Pvt. Ltd., payable at New Delhi via Online Payment Modes such as Debit Card, Credit Card or Net Banking for participating in the Tender.
Bidders can contact our Helpdesk at
https://esictenders.eproc.in/html/Support.asp
TERMS AND CONDITIONS
Literature of the quoted item, with detailed specifications must be enclosed.
1. Price Quoted should be for the supply destination of ESIC Super speciality Hospital, Sanathnagar,
Hyderabad.
2. Validity of bid for acceptance should be for a minimum period of 6 months.
3. The rates quoted should not be higher than that quoted in case of any other organization/
Institution.
4. Taxes (GST/Other taxes if any) should be mentioned separately in the price bid along with the
quoted rates of the Implant.
5. Tender Validity for the supply of implants must be minimum of 1 years from the date of
receiving of NOA (Notice of award) from tenderer.
6. Manufacturers Authorization Certificate The Certificate regarding authorize distributorship/
stockiest from the manufacturer, with period of validity and details of issuing authority must be
enclosed in original or copy attested by Notary Public or Gazetted officer.
7. Manufacturers licence and distributors licence for the supply of implants should be enclosed.
8. The qualified bidders shall be empanelled as per the item wise rates quoted. The empanelled
agencies/firms should strictly adhere to the mentioned delivery schedule.
9. Demonstration of Implant: Tendered implants shall have to be demonstrated before Technical
evaluation committee on stipulated day and time whenever asked for. Failure to demonstrate
the implants on the stipulated day without any genuine reason (which is to be intimated in
advance and should be acceptable to the hospital authorities) will mean that the tenderer is not
interested in supplying the implants & the Bid would be liable for rejection. In case of genuine
reason only two chances for implants demonstration will be given. Technical evaluation
committee is fully empowered to reject any bid if it is felt that the Implant is of inferior quality,
even if it is fulfilling the specifications and other commercial terms.
10. Qualified bidder should be deposit performance security deposit along with NOA (notice of
award) & procurement implants from agencies/firms (successful in technical bid) may be
empanelled with preference in order of lowest price.
11. Emergency order will be issued on short notice and should be able to supply in a span of 24 hrs.
12. The payment will be released after demonstration of satisfactory performance of supplied
implants after its installation or after the issue of consumed order from user department.
13. DEAN reserves the right to reject/accept any or all tenders/modifications in the terms and
conditions without assigning any reason thereof. No Correspondence will be entertained in this
regard.
I hereby accept all the above terms and conditions.
Name, signature & address of the tenderer with rubber stamp.
ANNEXURE-1
TENDER APPLICATION FORM FOR THE SUPPLY OF___________________
1. Name of the tenderer firm:-
2. Full Postal Address:-
3. Name and address of the tenderer with Pan No.
4. Cell Phone No.
5. Telephone No:-
6. Fax No.
7. Submit all the following details related to the manufacturer firm:
a. Name of the firm: b. Full postal address c. Email ID d. Telephone numbers e. Fax number
f. The firm should also provide the complete address along with telephone and fax no. of service station from where after sale service would be provided
8. Name and Address of your Bankers stating the name in which the Account stands:-
9. Any other information which you consider necessary to furnish:
It is certified that the above mentioned particulars are according to best of
my knowledge and no fact has been concealed or misrepresented.
Name and signature of authorized signatory with seal
Annexure II
Undertaking
(To be submitted on Rs. 100 non judicial stamp paper)
1. I the undersigned certify that I have gone though the Terms & conditions mentioned in the tender
document including annexure and undertake to comply with them. The rates quoted by me/us are
valid and binding on me/us for acceptance for the period of two year from date of NOA.
2. It is certified that rate quoted are the lowest quoted for any institution/Hospital in India.
3. Earnest money deposited by me/us viz Rs._______ in the form of Demand Draft/Banker’s Cheque in favour of ESIC Saving Fund Account No.1 payable at Hyderabad is attached herewith and shall remain in custody of the DEAN, ESIC Super speciality Hospital, Sanathnagar , Hyderabad 4. I/We give the rights to DEAN, ESIC Super speciality Hospital, Sanathnagar, Hyderabad to forfeit the
EMD deposited by me/us if any delay occur on my/agent’s part or fails to supply the Implant at the
appointed place and time and of the desired specifications.
5. There is no vigilance/CBI case or court case pending against the firm/supplier.
6. On Inspection if any article is found not as per supply order, it shall be replaced by me/us in time
as asked for, to prevent any inconvenience at my /our own expenses.
7. I/we hereby undertake to supply the items as per specifications and directions given in supply
order within the stipulated period.
8. I/we undertake to provide guarantee/warranty as mentioned in specifications from the date of
satisfactory installation and inspection. I also undertake that I will maintain the implants during this
period and replace the defected parts free of cost, if necessary.
9. I/we understand that DEAN, ESIC Super speciality Hospital Sanathnagar, Hyderabad the right to
accept or reject any or all the tenders without assigning any reasons (s) thereof.
Name, Signature & Address of the tenderer
With Stamp
THE CONTENTS OF TECHNICAL BID INCLUDE FOLLOWING ITEMS.
1. Covering letter indicating the list of enclosures.
2. EMD in accordance with instructions as above.
3. Authority letter from the competent authority with respect to name, designation and
specimen signature of the representative signing the tender document/authority letter.
4. Copy of Income tax clearance certificate, latest PAN/TAN, GST certificate.
5. Name and detailed specifications of the implant.
Warranty offered...........years (minimum as per specifications)
6. Statement of deviation parameter wise from tendered Commercial conditions, if any.
7. Copy of annual turnover for the last three financial years duly certified by Chartered
Accountant.
8. Authority letter from manufacturer / authorize distributor/stockist as per applicability.
9. Name, address and contact details of authorized center stationed in Hyderabad.
10. Minimum two certificates of satisfactory performance of the service rendered by the manufacturer
or authorized distributor duly authenticated by existing user departments. 11. Catalogue of the quoted Implant showing the make/ model number and specifications.
12 Declaration/ undertaking on stamp paper as per the proforma enclosed.
13. Tender document duly signed and seal of the firm affixed by the bidder.
14. Compliance certificate for any standards as mentioned in the specification (e.g. European
CE/USFDA etc)(Optional)
THE CONTENTS OF PRICE BID SHOULD INCLUDE FOLLOWING ITEMS.
1. The information given at Techno commercial bid should be reproduced in price bid
With prices indicated.
2. Rates should preferably be typed in words as well as in figures; free from erasing;
Cutting and over-writing price quoted should match with the items quoted in
Technical bid.
3. Each and every page of the quotation be separately numbered and duly signed. Only
techno-commercial bid (unpriced bid) will be opened first and shall be referred for the
technical Evaluation. The price bid of only those tenderers whose technical bid is found
acceptable by the competent authority will be opened for further action.
4. In case the price quoted cannot be matched with the item’s quoted in technical bid
The bid shall be liable to be rejected.
5. Rates and GST must be quoted separately. The price should be all inclusive Lump sum
Price offered for each item including cost of the Implant, freight, insurance, transit
insurance, packing forwarding etc. and including charges for the quoted warranty period.
6. The price should be on for ESIC SUPER SPECIALITY Hospital, SANATHNAGAR,
HYDERABAD. No other charges in addition will be payable on any account over and
above the lump sum price quoted in the price bid. The rates quoted in ambiguous terms
such as “freight on actual basis” or “Taxes as applicable extra” or “Packing forwarding
extra” etc will render the bid liable to rejection. The price should be quoted in I.N.R.
CHECK LIST
S.No. DOCUMENTS FOR TECHNICAL BID TO UPLOAD Yes/No
1 Scanned copy of Earnest money deposit by demand draft
2 Authority letter from the competent authority with respect to name
designation and specimen signature of the representative signing the
tender document/authority letter
3 Copy of Self Attested GST registration certificate
4 Copy of income tax clearance certificate ,latest PAN/TAN
5 Authorization certificate from ma-nufacturer of Implant.
6 Minimum two certificates of satisfactory performance report of the
Implant & satisfactorily quality of after sales service duly
authenticated, from existing users of the Implant
8 copy of annual turnover of last three Financial years duly certified by
CA
9 A signed undertaking on non judicial stamp paper of 100/- ( One
hundred only) along with tender (As per format at Annexure –B)
10 Technical details of quoted implant
11 Catalogue of quoted implant with complete specifications.
12 Compliance certificate to any standard as mentioned in the
specification (e.g. European CE/USFDA etc.) (Optional)
Note: all documents should be uploaded (readable scanned copy of documents), failing which
tender is liable to be cancelled.
Name, Signature & Address of the tenderer with Stamp
ANNEXURE -C
FORMAT FOR FINANCIAL BID FOR IMPLANTS …….
S.NO NAME OF THE
INSTRUMENT
MANUFACTUR
E/BRAND
RATE PER
UNIT (A)
TAXES IF
APPLICABLE (B)
TOTAL AMOUNT
(A+B) 1 2
Note: Bidders are requested to provide details of the manufacturer/brand for the
quoted item
Name, Signature & Address of the tenderer with Stamp
ANNEXURE-D
ITEM NO NAME OF THE ITEM & SPECIFICATIONS
1.
Pedicle screws for cervical, dorsal, lumbar & sacral (Titanium):
6.5*25(Monoaxial)
2. 5.5*25(Monoaxial)
3. 4.5*25(Monoaxial)
4. 6.5*30(Monoaxial)
5. 5.5*30(Monoaxial)
6. 4.5*30(Monoaxial)
7. 6.5*35(Monoaxial)
8. 5.5*35(Monoaxial)
9. 4.5*35(Monoaxial)
10. 6.5*40(Monoaxial)
11. 5.5*40(Monoaxial)
12. 4.5*40(Monoaxial)
13. 6.5*45(Monoaxial)
14. 5.5*45(Monoaxial)
15. 4.5*45(Monoaxial)
16. 6.5*50(Monoaxial)
17. 5.5*50(Monoaxial)
18. 4.5*50(Monoaxial)
19. 6.5*55(Monoaxial)
20. 5.5*55(Monoaxial)
21. 4.5*55(Monoaxial)
22. 6.5*60(Monoaxial)
23. 5.5*60(Monoaxial)
24. 4.5*60(Monoaxial)
25. 6.5*70(Monoaxial)
26. 5.5*70(Monoaxial)
27. 4.5*70(Monoaxial)
28. 6.5*25(Polyaxial)
29. 5.5*25(Polyaxial)
30. 4.5*25(Polyaxial)
31. 6.5*30(Polyaxial)
32. 5.5*30(Polyaxial)
33. 4.5*30(Polyaxial)
34. 6.5*35(Polyaxial)
35. 5.5*35(Polyaxial)
36. 4.5*35(Polyaxial)
37. 6.5*40(Polyaxial)
38. 5.5*40(Polyaxial)
39. 4.5*40(Polyaxial)
40. 6.5*45(Polyaxial)
41. 5.5*45(Polyaxial)
42. 4.5*45(Polyaxial)
43. 6.5*50(Polyaxial)
44. 5.5*50(Polyaxial)
45. 4.5*50(Polyaxial)
46. 6.5*55(Polyaxial)
47. 5.5*55(Polyaxial)
48. 4.5*55(Polyaxial)
49. 6.5*60(Polyaxial)
50. 5.5*60(Polyaxial)
51. 4.5*60(Polyaxial)
52. 6.5*70(Polyaxial)
53. 5.5*70(Polyaxial)
54. 4.5*70(Polyaxial)
55. 6.5*25(Fenestrated Screws)
56. 5.5*25(Fenestrated Screws)
57. 4.5*25(Fenestrated Screws)
58. 6.5*30(Fenestrated Screws)
59. 5.5*30(Fenestrated Screws)
60. 4.5*30(Fenestrated Screws)
61. 6.5*35(Fenestrated Screws)
62. 5.5*35(Fenestrated Screws)
63. 4.5*35(Fenestrated Screws)
64. 6.5*40(Fenestrated Screws)
65. 5.5*40(Fenestrated Screws)
66. 4.5*40(Fenestrated Screws)
67. 6.5*45(Fenestrated Screws)
68. 5.5*45(Fenestrated Screws)
69. 4.5*45(Fenestrated Screws)
70. 6.5*50(Fenestrated Screws)
71. 5.5*50(Fenestrated Screws)
72. 4.5*50(Fenestrated Screws)
73. 6.5*55(Fenestrated Screws)
74. 5.5*55(Fenestrated Screws)
75. 4.5*55(Fenestrated Screws)
76. 6.5*60(Fenestrated Screws)
77. 5.5*60(Fenestrated Screws)
78. 4.5*60(Fenestrated Screws)
79. 6.5*70(Fenestrated Screws)
80. 5.5*70(Fenestrated Screws)
81. 4.5*70(Fenestrated Screws)
82. 6.5*25 (Reduction Screws)
83. 5.5*25 (Reduction Screws)
84. 4.5*25 (Reduction Screws)
85. 6.5*30 (Reduction Screws)
86. 5.5*30 (Reduction Screws)
87. 4.5*30 (Reduction Screws)
88. 6.5*35 (Reduction Screws)
89. 5.5*35 (Reduction Screws)
90. 4.5*35 (Reduction Screws)
91. 6.5*40 (Reduction Screws)
92. 5.5*40 (Reduction Screws)
93. 4.5*40 (Reduction Screws)
94. 6.5*45 (Reduction Screws)
95. 5.5*45 (Reduction Screws)
96. 4.5*45 (Reduction Screws)
97. 6.5*50 (Reduction Screws)
98. 5.5*50 (Reduction Screws)
99. 4.5*50 (Reduction Screws)
100. 6.5*55 (Reduction Screws)
101. 5.5*55 (Reduction Screws)
102. 4.5*55 (Reduction Screws)
103. 6.5*60 (Reduction Screws)
104. 5.5*60 (Reduction Screws)
105. 4.5*60 (Reduction Screws)
106. 6.5*70 (Reduction Screws)
107. 5.5*70 (Reduction Screws)
108. 4.5*70 (Reduction Screws)
109. 6.5*25 (Dual Thread Screws)
110. 5.5*25 (Dual Thread Screws)
111. 4.5*25 (Dual Thread Screws)
112. 6.5*30 (Dual Thread Screws)
113. 5.5*30 (Dual Thread Screws)
114. 4.5*30 (Dual Thread Screws)
115. 6.5*35 (Dual Thread Screws)
116. 5.5*35 (Dual Thread Screws)
117. 4.5*35 (Dual Thread Screws)
118. 6.5*40 (Dual Thread Screws)
119. 5.5*40 (Dual Thread Screws)
120. 4.5*40 (Dual Thread Screws)
121. 6.5*45 (Dual Thread Screws)
122. 5.5*45 (Dual Thread Screws)
123. 4.5*45 (Dual Thread Screws)
124. 6.5*50 (Dual Thread Screws)
125. 5.5*50 (Dual Thread Screws)
126. 4.5*50 (Dual Thread Screws)
127. 6.5*55 (Dual Thread Screws)
128. 5.5*55 (Dual Thread Screws)
129. 4.5*55 (Dual Thread Screws)
130. 6.5*60 (Dual Thread Screws)
131. 5.5*60 (Dual Thread Screws)
132. 4.5*60 (Dual Thread Screws)
133. 6.5*70 (Dual Thread Screws)
134. 5.5*70 (Dual Thread Screws)
135. 4.5*70 (Dual Thread Screws)
136. 6.5*25 (Hydroxyapatite Screws)
137. 5.5*25 (Hydroxyapatite Screws)
138. 4.5*25 (Hydroxyapatite Screws)
139. 6.5*30 (Hydroxyapatite Screws)
140. 5.5*30 (Hydroxyapatite Screws)
141. 4.5*30 (Hydroxyapatite Screws)
142. 6.5*35 (Hydroxyapatite Screws)
143. 5.5*35 (Hydroxyapatite Screws)
144. 4.5*35 (Hydroxyapatite Screws)
145. 6.5*40 (Hydroxyapatite Screws)
146. 5.5*40 (Hydroxyapatite Screws)
147. 4.5*40 (Hydroxyapatite Screws)
148. 6.5*45 (Hydroxyapatite Screws)
149. 5.5*45 (Hydroxyapatite Screws)
150. 4.5*45 (Hydroxyapatite Screws)
151. 6.5*50 (Hydroxyapatite Screws)
152. 5.5*50 (Hydroxyapatite Screws)
153. 4.5*50 (Hydroxyapatite Screws)
154. 6.5*55 (Hydroxyapatite Screws)
155. 5.5*55 (Hydroxyapatite Screws)
156. 4.5*55 (Hydroxyapatite Screws)
157. 6.5*60 (Hydroxyapatite Screws)
158. 5.5*60 (Hydroxyapatite Screws)
159. 4.5*60 (Hydroxyapatite Screws)
160. 6.5*70 (Hydroxyapatite Screws)
161. 5.5*70 (Hydroxyapatite Screws)
162. 4.5*70 (Hydroxyapatite Screws)
163. CV Junction & cervical surgery lateral mass screws:
3.5mm*12(Monoaxial)
164. 3.5mm*14(Monoaxial)
165. 3.5mm*16(Monoaxial)
166. 3.5mm*18(Monoaxial)
167. 3.5mm*20(Monoaxial)
168. 3.5mm*22(Monoaxial)
169. 3.5mm*24(Monoaxial)
170. 3.5mm*26(Monoaxial)
171. 3.5mm*28(Monoaxial)
172. 3.5mm*12(Polyaxial)
173. 3.5mm*14(Polyaxial)
174. 3.5mm*16(Polyaxial)
175. 3.5mm*18(Polyaxial)
176. 3.5mm*20(Polyaxial)
177. 3.5mm*22(Polyaxial)
178. 3.5mm*24(Polyaxial)
179. 3.5mm*26(Polyaxial)
180. 3.5mm*28(Polyaxial)
181. 4mm*12(Monoaxial)
182. 4mm*14(Monoaxial)
183. 4mm*16(Monoaxial)
184. 4mm*18(Monoaxial)
185. 4mm*20(Monoaxial)
186. 4mm*22(Monoaxial)
187. 4mm*24(Monoaxial)
188. 4mm*26(Monoaxial)
189. 4mm*28(Monoaxial)
190. 4mm*12(Polyaxial)
191. 4mm*14(Polyaxial)
192. 4mm*16(Polyaxial)
193. 4mm*18(Polyaxial)
194. 4mm*20(Polyaxial)
195. 4mm*22(Polyaxial)
196. 4mm*24(Polyaxial)
197. 4mm*26(Polyaxial)
198. 4mm*28(Polyaxial)
199. 3.5mm*12(Dual Thread Screws)
200. 3.5mm*14(Dual Thread Screws)
201. 3.5mm*16(Dual Thread Screws)
202. 3.5mm*18(Dual Thread Screws)
203. 3.5mm*20(Dual Thread Screws)
204. 3.5mm*22(Dual Thread Screws)
205. 3.5mm*24(Dual Thread Screws)
206. 3.5mm*26(Dual Thread Screws)
207. 3.5mm*28(Dual Thread Screws)
208. 4mm*12(Dual Thread Screws)
209. 4mm*14(Dual Thread Screws)
210. 4mm*16(Dual Thread Screws)
211. 4mm*18(Dual Thread Screws)
212. 4mm*20(Dual Thread Screws)
213. 4mm*22(Dual Thread Screws)
214. 4mm*24(Dual Thread Screws)
215. .
4mm*26(Dual Thread Screws)
216. 4mm*28(Dual Thread Screws)
217. Rods for lateral mass:
40mm to 300mm length 3.5mm diameter
218. Rods for pedicle screws
40mm to 480mm length
5.5mm diameter
219. Transitional rods 3.5mm to 5.5mm(Diameter) 40-480mm(Length)
220. Transverse connectors 3.5mm diameter 15-20mm length
221. Prebended rods 3.5mm diameter 200-250mm length
222. Odontoid screws:
4mm diameter 25mm-65mm length
223. Odontoid screws:
3.5mm diameter 25mm-65mm length
224. Occipital plate:
Four holed 28-40mm
225. Four holed 38-50mm
226. Occipital bone screws (cancellous): 3.5*6mm
227. 3.5*8mm
228. 3.5*10mm
229. 4.0*6mm
230. 4.0*8mm
231. 4.0*10mm
232. Adjustable occipital plate (rotation 30degree) translating 4mm
233. Adjustable occipital rods:
3.5*40mm
234. 3.5*50mm
235. 3.5*60mm
236. 3.5*70mm
237. 3.5*80mm
238. 3.5*90mm
239. Prebended occipital plate with rods 3.5mm plate (diameter) with 220mm length
240. Trans-articular screws (partial/full threaded)3.5*30-50mm
241. Trans-articular screws (partial/full threaded)4.0*30-50mm
242. Cervical artificial disc 5(height)*12(AP)
243. 6(height)*12(AP)
244. 7(height)*12(AP)
245. Cervical artificial disc 5(height)*14(AP)
246. 6(height)*14(AP)
247. 7(height)*14(AP)
248. Cervical artificial disc 5(height)*16(AP)
249. 6(height)*16(AP)
250. 7(height)*16(AP)
251. Cervical artificial disc 5(height)*18(AP)
252. 6(height)*18(AP)
253. 7(height)*18(AP)
254. Anterior cervical Cages-Titanium
255. Anterior cervical Cages-PEEK
256. Expandable cage 12,14,16,18*20-85mm length(Titanium)
257. Expandable cage 12,14,16,18*20-85mm length(PEEK)
258. Expandable cage with plate
259. Collision cage
260. Cervical cage attached to a plate with bone graft
261. Joint Disc Spacers 4, 4.5, 5.0, 5.5 with 8mm/10mm thickness (Titanium)
262. Joint Disc Spacers 4, 4.5, 5.0, 5.5 with 8mm/10mm thickness (PEEK)
263. Anterior cervical plate (locking plate-titanium) 23mm-65mm
264. Cervical self tapping or drilling screws 4mm*10-24mm length
265. Cervical disc spacer (titanium) 5-8mm*7degree
266. Cervical disc spacer (PEEK) 5-8mm*7degree
267. Cervical disc spacer with locking plate 5-22mm length
268. Sub laminar wires upto 90cm
269. C2 lag screws with complete set
270. Anterior cervical plate locking screws
271. Tapering rods for cervico-dorsal fixation
272. TLIF cage: TLIF cage (0/4 deg) 25mm length 7mm thick (titanium)
273. TLIF cage (0/4 deg) 25mm length 8mm thick (titanium)
274. TLIF cage (0/4 deg) 25mm length 9mm thick (titanium)
275. TLIF cage (0/4 deg) 25mm length 10mm thick (titanium)
276. TLIF cage (0/4 deg) 25mm length 11mm thick (titanium)
277. TLIF cage (0/4 deg) 25mm length 12mm thick (titanium)
278. TLIF cage (0/4 deg) 29mm length 7mm thick (titanium)
279. TLIF cage (0/4 deg) 29mm length 8mm thick (titanium)
280. TLIF cage (0/4 deg) 29mm length 9mm thick (titanium)
281. TLIF cage (0/4 deg) 29mm length 10mm thick (titanium)
282. TLIF cage (0/4 deg) 29mmlength 11mm thick (titanium)
283. TLIF cage (0/4 deg) 29mm length 12mm thick (titanium)
284. TLIF cage (0/4 deg) 25mm length 7mm thick (PEEK)
285. TLIF cage (0/4 deg) 25mm length 8mm thick (PEEK)
286. TLIF cage (0/4 deg) 25mm length 9mm thick (PEEK)
287. TLIF cage (0/4 deg) 25mm length 10mm thick (PEEK)
288. TLIF cage (0/4 deg) 25mm length 11mm thick (PEEK)
289. TLIF cage (0/4 deg) 25mm length 12mm thick (PEEK)
290. TLIF cage (0/4 deg) 29mm length 7mm thick (PEEK)
291. TLIF cage (0/4 deg) 29mm length 8mm thick (PEEK)
292. TLIF cage (0/4 deg) 29mm length 9mm thick (PEEK)
293. TLIF cage (0/4 deg) 29mm length 10mm thick (PEEK)
294. TLIF cage (0/4 deg) 29mmlength 11mm thick (PEEK)
295. TLIF cage (0/4 deg) 29mm length 12mm thick (PEEK)
296. PLIF cage: PLIF cage (bullet shaped) 0/4 deg - 25mm length, 7mm thickness (Titanium)
297. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 8mm thickness (Titanium)
298. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 9mm thickness (Titanium)
299. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 10mm thickness (Titanium)
300. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 11mm thickness (Titanium)
301. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 12mm thickness (Titanium)
302. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 7mm thickness (Titanium)
303. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 8mm thickness (Titanium)
304. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 9mm thickness (Titanium)
305. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 10mm thickness (Titanium)
306. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 11mm thickness (Titanium)
307. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 12mm thickness (Titanium)
308. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 7mm thickness (PEEK)
309. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 8mm thickness (PEEK)
310. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 9mm thickness (PEEK)
311. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 10mm thickness (PEEK)
312. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 11mm thickness (PEEK)
313. PLIF cage (bullet shaped) 0/4 deg - 25mm length, 12mm thickness (PEEK)
314. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 7mm thickness (PEEK)
315. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 8mm thickness (PEEK)
316. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 9mm thickness (PEEK)
317. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 10mm thickness (PEEK)
318. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 11mm thickness (PEEK)
319. PLIF cage (bullet shaped) 0/4 deg - 20mm length, 12mm thickness (PEEK)
320. Reduction Screw: 5.5*40 (Monoaxial)
321. 5.5*45 (Monoaxial)
322. 5.5*50 (Monoaxial)
323. 6.5*40 (Monoaxial)
324. 6.5*45 (Monoaxial)
325. 6.5*50 (Monoaxial)
326. 5.5*40 (Polyaxial)
327. 5.5*45 (Polyaxial)
328. 5.5*50 (Polyaxial)
329. 6.5*40 (Polyaxial)
330. 6.5*45 (Polyaxial)
331. 6.5*50 ((Polyaxial)
332. Titanium cages/Vertebral cages: PEEK Cages
333. Collision Cages
334. Expandable Cages
335. Anterior cervical plates and screws (Self drilling and tapping): One level plate
336. Two level plate
337. Multi level plate
338. Adjustable locking screws 8mm
339. Adjustable locking screws 10mm
340. Adjustable locking screws 12mm
341. Adjustable locking screws 14mm
342. Adjustable locking screws 16mm
343. Atlas cables
344. Gardner Wells tongs Adult
345. Gardner Wells tongs Paediatric
346. Craniotomy Mesh: Surgical titanium mesh 4*4, 5*5, 6*6, 8*8inches
347. Miniplate-2holes 4,6 with different angles
348. Mini screw 2mm diameter to 4, 5, 6mm length (self drilling/self tapping)
349. Bone cement
350. Bone granules
351. Hooks: Laminar
352. Pedicle
353. Open on top
354. Open on sided
355. Inner screws
356. Aneurysmal clips and DIOM Applicator: Mini clips
357. Fenestrated
358. Different Angle Clips
359. Temporary/permanent
360. Different sized clips
361. Iliac Screws: Lateral Illiac Screw Ti 6.5mm Dia 55mm
362. Lateral Illiac Screw Ti 6.5mm Dia 60mm
363. Lateral Illiac Screw Ti 6.5mm Dia 65mm
364. Lateral Illiac Screw Ti 6.5mm Dia 70mm
365. Lateral Illiac Screw Ti 6.5mm Dia 75mm
366. Lateral Illiac Screw Ti 7mm Dia 55mm
367. Lateral Illiac Screw Ti 7mm Dia 60mm
368. Lateral Illiac Screw Ti 7mm Dia 65mm
369. Lateral Illiac Screw Ti 7mm Dia 70mm
370. Lateral Illiac Screw Ti 7mm Dia 75mm
371. Inner screws: Appropriate to pedicle screws or Break off screws
372. Laminar hooks: Wide blade
373. Narrow
374. Angled
375. Reduced distance
376. Open on top, sides
377. Artificial dura: Synthetic fabric dural patch (different sizes)
378. Dural regenerated matrix (different sizes)
379. Shunts and reservoirs: Antibiotic impregnated
380. TP Shunt
381. Programmable shunt
382. VP Shunt (low, medium, high pressure)
383. Lumbar shunt (drain)
384. External ventricular bag
385. Cerebral reservoir (adult)
386. Cerebral reservoir (paediatric)
387. Epilepsy surgery 4-8-32 contact electrodes
388. C1 C2 Joint Spacer
389. Customised 3D digital printing for cranium
390. Customised 3D digital printing for spine
391. EEG electrodes or Grid electrodes
392. Vertebroplasty (complete set)
393. Kyphoplasty (complete set)
394. Dominos connector
395. Offset connectors
396. Lumbar/dorsal vertebral body cylindrical expandable cages (titanium)
397. Lumbar/dorsal vertebral body cylindrical expandable cages(PEEK)
398. Lumbar disc replacement(Artificial disc)
399. Percutaneous pedicle screw and rod for spinal fixation (complete set)
