Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
Umwelt Produktdeklaration Name des Herstellers – Name des Produkts
ENVIRONMENTAL PRODUCT DECLARATIONas per ISO 14025 and EN 15804
Owner of the Declaration
Programme holder Institut Bauen und Umwelt e.V. (IBU)
Publisher Institut Bauen und Umwelt e.V. (IBU)
Declaration number EPD-BAS-20170093-CAA1-EN
Issue date 23.05.2017
Valid to 22.05.2022
AgiliaTM Ready-mix ConcreteAggregate Industries UK Limited
www.ibu-epd.com / https://epd-online.com
2 Environmental Product Declaration Aggregate Industries UK Limited – Agilia Ready-mixed Concrete
General Information
Aggregate Industries UK Limited AgiliaTM Ready-mix ConcreteProgramme holderIBU - Institut Bauen und Umwelt e.V.Panoramastr. 110178 BerlinGermany
Owner of the DeclarationBASF plc, Construction Chemicals,PO Box 4, Earl Road, Cheadle Hulme, Cheadle,Cheshire, SK8 6QG,United Kingdom Aggregate Industries UK LimitedBardon Hill, Bardon Road,Coalville,Leicestershire, LE67 1TL,United Kingdom
Declaration numberEPD-BAS-20170093-CAA1-EN
Declared product / Declared unitAgiliaTM Ready-mix Concrete / 1 m3
This Declaration is based on the Product Category Rules:Concrete components made of in-situ or ready-mixed concrete, 07.2014 (PCR tested and approved by the SVR)
Issue date23.05.2017
Valid to22.05.2022
Scope:This EPD declaration is relevant to AgiliaTM Ready-mixed Concrete manufactured by Aggregate Industries UK Limited at their Newbold plant in the United Kingdom. Aggregate Industries UK Limited provided the underlying data for the calculation of the LCA and is responsible for the provision of the correct data. The life cycle assessment was calculated with the Life Cycle Analyzer, a tool from BASF developed with support of thinkstep AG. Therefore, BASF is liable for the correct use of the Life Cycle Analyzer and not for the inserted manufacturer data.The owner of the declaration shall be liable for the underlying information and evidence; the IBU shall not be liable with respect to manufacturer information, life cycle assessment data and evidences.Verification
The CEN Norm /EN 15804/ serves as the core PCRIndependent verification of the declaration
according to /ISO 14025/Prof. Dr.-Ing. Horst J. Bossenmayer(President of Institut Bauen und Umwelt e.V.) internally x externally
Dr. Burkhart Lehmann(Managing Director IBU)
Matthias Schulz(Independent verifier appointed by SVR)
Product
Product description / Product definitionReady-mix concrete is manufactured in stationary or mobile concrete batching plants. The concrete is a composite material basically manufactured to a set recipe/mix design by mixing cement, water and aggregates. Additionally, concrete additives and admixtures can be used to change and improve the concrete properties in fresh and/or hardened state. Ready-mix concrete is normally transported in a fresh state to the construction site by truck mounted transit mixers and is poured into formwork, compacted when necessary, cured and demoulded after hydration in the hardened state and shape.
The engineering properties of AgiliaTM Ready-mix Concrete may be taken as being in all respects similar to conventional concrete and for design purposes should be assumed to be those stated in /BS EN 1992-1-1/:
ApplicationReady-mix concrete is used as a construction material for building works, to be placed on-site. The selected ready-mix concrete is used as finished element for construction (residential, non-residential, infrastructure).
3 Environmental Product Declaration Aggregate Industries UK Limited – Agilia Ready-mixed Concrete
Technical DataThe table below provides technical construction data with reference to the test standard /PCR Part B/:
Constructional dataName Value UnitThermal conductivity na* W/(mK)Calculation value for thermal conductivity na* W/(mK)
Water vapour diffusion resistance factor na* -
Sound absorption coefficient na* %Gross density /BS EN 12390/ 2332 kg/m3
Compressive strength /BS EN 12390/ 40 N/mm2
Tensile strength na* N/mm2
Flexural strength na* N/mm2
Modulus of elasticity na* N/mm2
Equilibrium moisture content na* %n/a*: not applicable
AgiliaTM Ready-mix Concrete conforms to the requirements of European standard /BS EN 206:2013/and with the requirements of /BS 8500-1:2015/ and BS 8500-2:2015/.
Base materials / Ancillary materials
List of main basic materials and ancillary materials: Name Value UnitCement 5 - 15 %Admixtures <1 %SCM (Supplementary Cementitious Materials) 5 - 15 %
Sand 30 - 45 %Aggregates 25 - 40 %Additives <1 %Water 1 - 15 %
The product does not contain materials that are listed in “Candidate List of Substances of Very High Concern for Authorisation” /REACH/.
Reference service lifeThe construction's life time is defined to be 60 years, while the service life of the concrete product is 60 years. This results in 0 complete replacements.
LCA: Calculation rules
Declared UnitThe declared unit is:
Name Value UnitDeclared unit 1 m3
Density 2332 kg/m3
Conversion factor to 1 kg 0.000429 -
System boundaryThe type of EPD is cradle-to-gate. The system boundaries include the life cycle stages as follows, which are accordant to /EN 15804/:
Raw material extraction and processing (module A1)
Transport to manufacturer (module A2) Manufacturing (A3)
The background data applied for the calculation of the LCA is representative for Europe and is derived from the /GaBi database/.
The energy demand for manufacturing of concrete is not a main contributor to the LCA results and therefore can be estimated with European background data. The life cycle assessment was calculated with the Life Cycle Analyzer, a tool from BASF developed with support of thinkstep AG. For the admixtures data from BASF /BASF 2011/ and existing Model EPDs /Bauchemie 2014/ are used. The underlying primary data was collected by Aggregate Industries UK Limited for their Newbold plant in the United Kingdom and is representative for the production year of 2016.
ComparabilityBasically, a comparison or an evaluation of EPD data is only possible if all the data sets to be compared were created according to /EN 15804/ and the building context, respectively the product-specific characteristics of performance, are taken into account. .
LCA: Scenarios and additional technical information
This EPD focuses on the manufacturing stage of AgiliaTM Ready-mix Concrete (modules A1- A3). Therefore, no information on modules A4, B1-B7, C1-C4 and D is provided in this section of the EPD.
4 Environmental Product Declaration Aggregate Industries UK Limited – Agilia Ready-mixed Concrete
LCA: ResultsThe tables below give the LCA results for the environmental impacts, resource use as well as output flows and waste categories for the modules that are declared.
DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE NOT DECLARED)
PRODUCT STAGECONSTRUCTION PROCESS
STAGEUSE STAGE END OF LIFE STAGE
BENEFITS AND LOADS
BEYOND THE SYSTEM
BOUNDARIES
Raw
mat
eria
l su
pply
Tran
spor
t
Man
ufac
turin
g
Tran
spor
t fro
m th
e ga
te to
the
site
Ass
embl
y
Use
Mai
nten
ance
Rep
air
Rep
lace
men
t
Ref
urbi
shm
ent
Ope
ratio
nal e
nerg
y us
e
Ope
ratio
nal w
ater
us
e
De-
cons
truct
ion
dem
oliti
on
Tran
spor
t
Was
te p
roce
ssin
g
Dis
posa
l
Reu
se-
Rec
over
y-R
ecyc
ling-
pote
ntia
l
A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D
X X X MND MND MND MND MND MND MND MND MND MND MND MND MND MND
RESULTS OF THE LCA - ENVIRONMENTAL IMPACT: Agilia Ready-mixed Concrete / 1m3 Parameter Unit A1-A3
Global warming potential [kg CO2-Eq.] 3.73E+2Depletion potential of the stratospheric ozone layer [kg CFC11-Eq.] 1.72E-8
Acidification potential of land and water [kg SO2-Eq.] 9.02E-1Eutrophication potential [kg (PO4)3--Eq.] 1.22E-1
Formation potential of tropospheric ozone photochemical oxidants [kg ethene-Eq.] 8.84E-2Abiotic depletion potential for non-fossil resources [kg Sb-Eq.] 3.51E-4
Abiotic depletion potential for fossil resources [MJ] 2.23E+3RESULTS OF THE LCA - RESOURCE USE: Agilia Ready-mixed Concrete / 1m3
Parameter Unit A1-A3
Renewable primary energy as energy carrier [MJ] 1.56E+2Renewable primary energy resources as material utilization [MJ] 0.00E+0
Total use of renewable primary energy resources [MJ] 1.56E+2Non-renewable primary energy as energy carrier [MJ] 2.42E+3
Non-renewable primary energy as material utilization [MJ] 0.00E+0Total use of non-renewable primary energy resources [MJ] 2.42E+3
Use of secondary material [kg] 2.11E+2Use of renewable secondary fuels [MJ] 4.84E+1
Use of non-renewable secondary fuels [MJ] 1.94E+2Use of net fresh water [m³] 1.12E+2
RESULTS OF THE LCA – OUTPUT FLOWS AND WASTE CATEGORIES: Agilia Ready-mixed Concrete / 1m3
Parameter Unit A1-A3
Hazardous waste disposed [kg] 9.96E-3Non-hazardous waste disposed [kg] 4.13E+1
Radioactive waste disposed [kg] 7.54E-2Components for re-use [kg] INDMaterials for recycling [kg] IND
Materials for energy recovery [kg] INDExported electrical energy [MJ] INDExported thermal energy [MJ] IND
References
Institut Bauen und UmweltInstitut Bauen und Umwelt e.V., Berlin(pub.):Generation of Environmental Product Declarations (EPDs);www.ibu-epd.de
ISO 14025DIN EN ISO 14025:2011-10: Environmental labels and declarations — Type III environmental declarations — Principles and procedures
EN 15804EN 15804:2012-04+A1 2013: Sustainability of construction works — Environmental Product
Declarations — Core rules for the product category of construction products
PCR Part AInstitut Bauen und Umwelt e.V., Berlin (pub.): Product Category Rules for Construction Products from the range of Environmental Product Declarations of Institut Bauen und Umwelt (IBU), Part A: Calculation Rules for the Life Cycle Assessment and Requirements on the Background Report, 04/2013 PCR Part BInstitut Bauen und Umwelt e.V., Berlin (pub.): Part B: Requirements on the EPD for Concrete
5 Environmental Product Declaration Aggregate Industries UK Limited – Agilia Ready-mixed Concrete
components made of in-situ or ready-mixed concrete, 07/2014 BS EN 12390BS EN 12390-3:2009. Testing hardened concrete.Compressive strength of test specimensBS EN 12390-5:2009. Testing hardened concrete.Flexural strength of test specimensBS EN 12390-7:2009. Testing hardened concrete.Density of hardened concrete BASF Life Cycle AnalyzerLife Cycle Analyzer version 1.0 developed by BASF with support of thinkstep, 2015 GaBi 6GaBi 6 dataset documentation of the software-system and databases, LBP, University of Stuttgart andthinkstep AG, Leinfelden-Echterdingen, 2014 http://documentation.gabi-software.com/ GaBi databaseGaBi database 2014http://database-documentation.gabisoftware.com/support/gabi/ BASF 2011BASF AG: Peer review of BASF Life Cycle Inventory Method for X-SEED Concrete Admixture – Review report prepared by DEKRA, February 2011
Bauchemie 2014
Deutsche Bauchemie e.V., EPDs for concrete admixtures, IBU (Institut Bauen und Umwelt e.V.), 2014 REACHDirective (EG) No. 1907/2006 of the European Parliament and of the Council dated 18 December2006 on the registration, evaluation, approval and restriction of chemical substances (REACH), for establishing a European Agency for chemical substances, for amending Directive 1999/45/EC and for annulment of Directive (EEC) No. 793/93 of the Council, Directive (EC) No. 1488/94 of the Commission, Guideline 76/769/EEC of the Council and Guidelines 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC of the Commission BS EN 1992-1-1:2004+A1:2014 Eurocode 2: Design of concrete structures. General rules and rules for buildings BS EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity BS 8500-1:2015+A1:2016 Concrete. Complementary British Standard to BS EN 206. Method of specifying and guidance for the specifier
BS 8500-2:2015+A1:2016 Concrete. Complementary British Standard to BS EN 206. Specification for constituent materials and concrete
PublisherInstitut Bauen und Umwelt e.V.Panoramastr. 110178 BerlinGermany
Tel +49 (0)30 3087748- 0Fax +49 (0)30 3087748- 29Mail [email protected] www.ibu-epd.com
Programme holderInstitut Bauen und Umwelt e.V.Panoramastr 110178 BerlinGermany
Tel +49 (0)30 - 3087748- 0Fax +49 (0)30 – 3087748 - 29Mail [email protected] www.ibu-epd.com
Author of the Life Cycle AssessmentBASF plc, Construction Chemicals,PO Box 4, Earl Road, Cheadle Hulme, Cheadle -SK86QG Cheshire,United Kingdom
thinkstep AG,Hauptstr. 111 - 113, -707711 Leinfelden-Echterdingen,Germany
Tel +44 (0)161-485-6222Fax +44 (0)161-488-5220Mail [email protected] www.master-builders-solutions. basf.co.uk
Tel +49 (0)711-341817-0Fax +49 (0)711-341817-25Mail [email protected] www.thinkstep.com
Owner of the DeclarationBASF plc, Construction Chemicals,PO Box 4, Earl Road, Cheadle Hulme, Cheadle -SK86QG Cheshire,United Kingdom
Aggregate Industries UK Limited,Bardon Hill, Bardon Road, Coalville, -LE671T Leicestershire,United Kingdom
Tel +44 (0)161-485-6222Fax +44 (0)161-488-5220Mail [email protected] www.master-builders-solutions.basf.co.uk
Tel +44 (0)1530-510066Fax +44 (0)1530-512198Mail [email protected] www.aggregate.com