Embed Size (px)
Citation preview
Evaluation of DL subchannelization
IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number:
IEEE C802.16m-09/0347Date Submitted:
2009-01-07Source:
Taeyoung Kim, Hyunkyu Yu, Jaeweon Cho, Voice: +82-31-279-0202Hokyu Choi , Heewon Kang E-mail: [email protected]
Samsung Electronics Co., Ltd. 416 Maetan-3, Suwon, 443-770, Korea
Venue: IEEE 802.16m Session#59, San Diego, US IEEE 802.16m-08/053r1, “Call for Comments and Contributions on Project 802.16m Amendment Working Document”. Target topic: “DL Physical Structure”
Base Contribution:None
Purpose:Discussion and Approval
Notice:This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein.
Release:The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and
accepts that this contribution may be made public by IEEE 802.16.
Patent Policy:The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.
Motivation• In the current IEEE 802.16m Amendment Working Document
(IEEE80216m-08/050), – The detail permutation rules (e.g. subband partitioning, miniband permutation,
secondary permutation, subcarrier permutation) are NOT determined yet.
• In the document C80216m-08_1508 or the latest version, there are several permutation rules proposed from many companies
• This contribution shows the several kinds of evaluation results to compare the permutation rules proposed from many companies
2/14
Performance Metric
• Emulation for estimating freq. diversity gain effect– Compare the number of subcarriers located in the different frequency
band according to the different number of DRUs
• Link level simulation– Single cell environment
– To see the frequency diversity gain
• Hitting ratio comparison– To verify the interference due to the tone-pair hits from different
cells/sectors
3/14
Emulation for freq. diversity• Frequency diversity gain is related with how many subcarriers
having different channel statistics exist within data burst
• Performance Metric– Number of subcarriers located in the different frequency band
• Evaluation results
4/14
Link level simulation (1)• Simulation Conditions
– Working Scenarios
– Single-cell Environment– MIMO configuration
• 2x2 SFBC
• Uncorrelated MIMO (4 lambda wavelength)
– Channel: PedA, PedB– Channel estimator: 2D MMSE CH. Est.
Freq. Partition # of subbands # of minibands # of PRUs in FPi
Scenario #1FP0 2 4 12
FP1 ~ FP3 2 4 12
Scenario #2FP0 4 8 24
FP1 ~ FP3 0 8 8
Scenario #3FP0 6 24 48
FP1 ~ FP3 0 0 0
Link level simulation (2)• Evaluation Results
– FER vs. SNR• PedA, 3km/h
• # of LRUs = 1
– Cell_ID = 0
-6 -4 -2 0 2 4 6 8 10 1210
-3
10-2
10-1
100
SNR[dB]
FE
R
Single cell Environment
Samsung
IntelLGE
Working scenario #1
Working scenario #2
Working scenario #3
-6 -4 -2 0 2 4 6 8 10 1210
-3
10-2
10-1
100
SNR[dB]
FE
R
Single cell Environment
Samsung
Intel
LGE
-6 -4 -2 0 2 4 6 8 10 1210
-3
10-2
10-1
100
SNR[dB]
FE
R
Single cell Environment
Samsung
Intel
LGE
Link level simulation (3)• Evaluation Results
– FER vs. SNR• PedB, 3km/h
• # of LRUs = 1
– Cell_ID = 0
-4 -2 0 2 4 6 8 1010
-3
10-2
10-1
100
SNR[dB]
FE
R
Single cell Environment
Samsung
IntelLGE
Working scenario #1
-4 -2 0 2 4 6 8 1010
-3
10-2
10-1
100
SNR[dB]
FE
R
Single cell Environment
Samsung
Intel
LGE
Working scenario #2
-4 -2 0 2 4 6 8 1010
-3
10-2
10-1
100
SNR[dB]
FE
R
Single cell Environment
Samsung
Intel
LGE
Working scenario #3
Conclusion – LLS results
• For LGE’s proposal, the frequency diversity order can be different according to different Cell_ID, so the LLS performance can be different.
• In terms of frequency diversity gain from LLS results, proposal from Intel and Samsung have the best performance compared to LGE’s proposal.
Hitting Ratio Comparison (1)
• Evaluate the number of hits among different Cell_IDs for subcarrier permutation
• Evaluation methodology– To choose (512, 2)=130816 cell pairs
– For each cell pair, there are NDRU*NDRU sub-channel pairs,
• Number of hits : the number of same tone-pairs for each LRU pair• Average Hit Number : Hit statistic over (130816*NDRU*NDRU)
Hitting Ratio Comparison (2)
• Results– k : number of tone-pairs hit within one LRU
# of DRUs
Avg. hitting No.
Hitting ratio(k: 32~48)
Hitting ratio(k: 24~48)
Hitting ratio(k: 0~8)
Hitting ratio(k: 0~12)
4
Samsung 12 4.86% 28.92% 38.65% 71.08%
Intel 12 6.21% 31.26% 43.69% 68.74%
LGE 11.92 1.31% 3.14% 14.25% 66.91%
8
Samsung 6 0.59% 3.06% 73.77% 90.82%
Intel 6 1.54% 1.54% 60.89% 92.20%
LGE 5.99 0.04% 0.19% 90.64% 98.71%
12
Samsung 4 0.18% 0.63% 84.67% 93.96%
Intel 4 0.7% 1.05% 80.78% 90.81%
LGE 3.99 0.01% 0.05% 98.06% 99.6%
24
Samsung 2 0.02% 0.09% 97.13% 99.11%
Intel 2 0.19% 0.19% 94.16% 98.59%
LGE 1.99 0.00% 0.01% 99.78% 99.96%
Conclusion – Hitting Ratio
• For average hit number, the proposal from Intel, Samsung and LGE have almost same number.
• For Intel’s proposal, the probability to collide all tone-pairs is higher than LGE and Samsung
• LGE’s subcarrier permutations have the best performance compared to Intel and Samsung in terms of Hitting Ratio
Recommendation
• Discuss and adopt the formulas proposed by Samsung in IEEE C802.16m-08/1508r1
