HUYETT.COM • 785-392-3017

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

138

Description

For detailed specifications and tolerances, visi t Huyett.com.

How to Identify

W

DsDg

T d

S Max

DfG

EXTERNAL – C-CLIP

Ideal for low clearance applications where radial installation is preferred.

Additional attribute data on adjacent page.

Item#

ShaftDiameter

Groove Size Ring Size & Weight Item#

Clearance Diameter Thrust Load1 Square Corner Abutment

Maximum Section Allowable Corner Radii & Chamfers

Max.Load

w/R Max.or Ch Max.

EdgeMargin

RPM LimitsStandard Material

Use with Applicator

Diameter Width Depth Free Diameter

Thickness2 WeightPer

1,000 pcs.

Free Outside Diameter

Reference

Installed in Groove

Ring SafetyFactor of 3

Groove Safety

Factor of 2

Ds Dg Tol. W Tol. d Df Tol. T Tol. lbs. G L2 Prlbs.

Pglbs.

S Max.

Tol. R Max.

Ch Max.

P'rlbs.

Y

C-012 .125" (1/8) .106"±.0015".0015"**

.020" +.002/-.000" .0095" .102" +.002/-.004" .015" ±.002" .030 C-012 .165" .18" 86 45 .031" ±.003" .014" .011" 85 .020" 80,000 RRA-300

C-015 .156" (5/32) .135" .020" +.002/-.000" .0105" .131" +.002/-.004" .015" ±.002" .052 C-015 .205" .22" 102 55 .037" ±.003" .018" .014" 100 .020" 75,000 RRA-080

C-018 .188" (3/16) .165" .020" +.002/-.000" .011" .161" +.002/-.004" .015" ±.002" .062 C-018 .244" .25" 132 70 .042" ±.003" .021" .016" 110 .022" 73,000 RRA-090

C-021 .219" (7/32) .193" ±.002" .0015"** .029" +.003/-.000" .013" .187" +.003/-.005" .025" ±.002" .120 C-021 .275" .29" 264 100 .044" ±.003" .021" .016" 260 .026" 71,000 RRA-310

C-023 .236" (15/64) .208" ±.002" .002"** .029" +.003/-.000" .014" .203" +.003/-.005" .025" ±.002" .150 C-023 .295" .31" 284 115 .046" ±.004" .022" .017" 275 .028" 62,000 RRA-320

C-025 .250" (1/4) .220"

±.002".002"**

.029" +.003/-.000" .015" .211" +.003/-.005" .025" ±.002" .157 C-025 .311" .33" 294 130 .050" ±.004" .023" .018" 290 .030" 60,000 RRA-330

C-028 .281" (9/32) .247" .029" +.003/-.000" .017" .242" +.003/-.005" .025" ±.002" .190 C-028 .346" .36" 335 165 .051" ±.004" .021" .016" 310 .034" 56,000 RRA-340

C-031 .312" (5/16) .276" .029" +.003/-.000" .018" .270" +.003/-.005" .025" ±.002" .226 C-031 .376" .39" 376 200 .053" ±.004" .024" .018" 310 .036" 52,000 RRA-350

C-037 .375" (3/8) .335" .029" +.003/-.000" .020" .328" +.003/-.005" .025" ±.002" .300 C-037 .448" .47" 447 270 .060" ±.004" .026" .020" 310 .040" 43,000 RRA-360

C-040 .406" (13/32) .364" .029" +.003/-.000" .021" .359" +.003/-.005" .025" ±.002" .352 C-040 .486" .50" 487 300 .063" ±.004" .027" .021" 310 .042" 40,000 RRA-370

C-043 .438" (7/16) .393" .029" +.003/-.000" .022" .386" +.003/-.005" .025" ±.002" .359 C-043 .517" .53" 528 350 .065" ±.004" .029" .022" 310 .044" 31,000 RRA-380

C-050 .500" (1/2) .45"

±.003".004"**

.039" +.003/-.000" .025" .441" ±.006" .035" ±.002" .671 C-050 .581" .60" 842 450 .070" ±.005" .030" .023" 610 .050" 25,000 RRA-290

C-056 .562" (9/16) .507" .039" +.003/-.000" .028" .497" ±.006" .035" ±.002" .710 C-056 .653" .67" 944 550 .078" ±.005" .033" .025" 610 .056" 22,000 RRA-390

C-062 .625" (5/8) .563" .039" +.003/-.000" .031" .553" ±.006" .035" ±.002" .937 C-062 .715" .74" 1,045 700 .081" ±.005" .033" .025" 610 .062" 20,000 RRA-400

C-068 .688" (11/16) .619" .046" +.003/-.000" .034" .608" ±.007" .042" ±.002" 1.30 C-068 .784" .80" 1,726 800 .086" ±.005" .034" .026" 880 .068" 18,500 RRA-410

C

TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:

"NONE" • -BC • -SS • -ZD • -Z3

Dg

L2

1. Verify C-shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the ring outside diameter (G).4. Measure the ring thickness (T).5. Find the part in the chart.

Clearance Diameter Installed In GrooveRing Dimensions Groove Dimensions

W

DsDg

T d

S Max

DfG

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

SALES@HUYETT.COM

139For detailed specifications and tolerances, visi t Huyett.com.

Suffix Material/Finish

For hardness specifications, see page 141.Larger sizes may be available upon request.

** F.I.M. (Full Indicator Movement) – Maximum allowable deviation of runout between groove and shaft. 1 Based on housings/shafts made of cold rolled steel. For more information on thrust load and safety

factor see pages 14 & 15.2 For plated rings add .002" to the listed maximum thickness. Maximum thickness will be a minimum of

.0002" less than the listed groove width (W) minimum.

Item#

ShaftDiameter

Groove Size Ring Size & Weight Item#

Clearance Diameter Thrust Load1 Square Corner Abutment

Maximum Section Allowable Corner Radii & Chamfers

Max.Load

w/R Max.or Ch Max.

EdgeMargin

RPM LimitsStandard Material

Use with Applicator

Diameter Width Depth Free Diameter

Thickness2 WeightPer

1,000 pcs.

Free Outside Diameter

Reference

Installed in Groove

Ring SafetyFactor of 3

Groove Safety

Factor of 2

Ds Dg Tol. W Tol. d Df Tol. T Tol. lbs. G L2 Prlbs.

Pglbs.

S Max.

Tol. R Max.

Ch Max.

P'rlbs.

Y

C-012 .125" (1/8) .106"±.0015".0015"**

.020" +.002/-.000" .0095" .102" +.002/-.004" .015" ±.002" .030 C-012 .165" .18" 86 45 .031" ±.003" .014" .011" 85 .020" 80,000 RRA-300

C-015 .156" (5/32) .135" .020" +.002/-.000" .0105" .131" +.002/-.004" .015" ±.002" .052 C-015 .205" .22" 102 55 .037" ±.003" .018" .014" 100 .020" 75,000 RRA-080

C-018 .188" (3/16) .165" .020" +.002/-.000" .011" .161" +.002/-.004" .015" ±.002" .062 C-018 .244" .25" 132 70 .042" ±.003" .021" .016" 110 .022" 73,000 RRA-090

C-021 .219" (7/32) .193" ±.002" .0015"** .029" +.003/-.000" .013" .187" +.003/-.005" .025" ±.002" .120 C-021 .275" .29" 264 100 .044" ±.003" .021" .016" 260 .026" 71,000 RRA-310

C-023 .236" (15/64) .208" ±.002" .002"** .029" +.003/-.000" .014" .203" +.003/-.005" .025" ±.002" .150 C-023 .295" .31" 284 115 .046" ±.004" .022" .017" 275 .028" 62,000 RRA-320

C-025 .250" (1/4) .220"

±.002".002"**

.029" +.003/-.000" .015" .211" +.003/-.005" .025" ±.002" .157 C-025 .311" .33" 294 130 .050" ±.004" .023" .018" 290 .030" 60,000 RRA-330

C-028 .281" (9/32) .247" .029" +.003/-.000" .017" .242" +.003/-.005" .025" ±.002" .190 C-028 .346" .36" 335 165 .051" ±.004" .021" .016" 310 .034" 56,000 RRA-340

C-031 .312" (5/16) .276" .029" +.003/-.000" .018" .270" +.003/-.005" .025" ±.002" .226 C-031 .376" .39" 376 200 .053" ±.004" .024" .018" 310 .036" 52,000 RRA-350

C-037 .375" (3/8) .335" .029" +.003/-.000" .020" .328" +.003/-.005" .025" ±.002" .300 C-037 .448" .47" 447 270 .060" ±.004" .026" .020" 310 .040" 43,000 RRA-360

C-040 .406" (13/32) .364" .029" +.003/-.000" .021" .359" +.003/-.005" .025" ±.002" .352 C-040 .486" .50" 487 300 .063" ±.004" .027" .021" 310 .042" 40,000 RRA-370

C-043 .438" (7/16) .393" .029" +.003/-.000" .022" .386" +.003/-.005" .025" ±.002" .359 C-043 .517" .53" 528 350 .065" ±.004" .029" .022" 310 .044" 31,000 RRA-380

C-050 .500" (1/2) .45"

±.003".004"**

.039" +.003/-.000" .025" .441" ±.006" .035" ±.002" .671 C-050 .581" .60" 842 450 .070" ±.005" .030" .023" 610 .050" 25,000 RRA-290

C-056 .562" (9/16) .507" .039" +.003/-.000" .028" .497" ±.006" .035" ±.002" .710 C-056 .653" .67" 944 550 .078" ±.005" .033" .025" 610 .056" 22,000 RRA-390

C-062 .625" (5/8) .563" .039" +.003/-.000" .031" .553" ±.006" .035" ±.002" .937 C-062 .715" .74" 1,045 700 .081" ±.005" .033" .025" 610 .062" 20,000 RRA-400

C-068 .688" (11/16) .619" .046" +.003/-.000" .034" .608" ±.007" .042" ±.002" 1.30 C-068 .784" .80" 1,726 800 .086" ±.005" .034" .026" 880 .068" 18,500 RRA-410

EXTERNAL – C-CLIP

Additional attribute data on adjacent page.

C

### = CARBON SPRING STEEL, PHOSPHATE###-BC = BERYLLIUM COPPER, PLAIN ###-SS = PH 15-7 MO STAINLESS STEEL, PLAIN###-ZD = CARBON SPRING STEEL, ZINC YELLOW###-Z3 = CARBON SPRING STEEL, ZINC TRIVALENTMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.

Maximum Corner Radius (R Max) & Chamfer (Ch Max)

for Retained Part

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

Br

Y

R Max

Ch Max

Maximum Bottom Radii (Br), .005 for ring sizes C-012 – C-043; .010 for ring sizes C-046 – C-100; .015 for ring sizes C-112 – C-200

Edge Margin (Y)

STACKED OPTIONS AVAILABLE, SEE HUYETT.COM FOR MORE DETAILS

HUYETT.COM • 785-392-3017

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

140For detailed specifications and tolerances, visi t Huyett.com.

How to Identify

EXTERNAL – C-CLIP

Additional attribute data on adjacent page.

Item#

ShaftDiameter

Groove Size Ring Size & Weight Item#

Clearance Diameter Thrust Load1 Square Corner Abutment

Maximum Section Allowable Corner Radii & Chamfers

Max.Load

w/R Max.or Ch Max.

EdgeMargin

RPM LimitsStandard Material

Use with Applicator

Diameter Width Depth Free Diameter

Thickness2 WeightPer

1,000 pcs.

Free Outside Diameter

Reference

Installed in Groove

Ring SafetyFactor of 3

Groove Safety

Factor of 2

Ds Dg Tol. W Tol. d Df Tol. T Tol. lbs. G L2 Prlbs.

Pglbs.

S Max.

Tol. R Max.

Ch Max.

P'rlbs.

Y

C-075 .750" (3/4) .676"

±.003".004"**

.046" +.003/-.000" .037" .665" ±.007" .042" ±.002" 1.50 C-075 .845" .87" 1,878 1,000 .090" ±.005" .036" .027" 880 .074" 17,500 RRA-280

C-081 .812" (13/16) .732" .046" +.003/-.000" .040" .721" ±.007" .042" ±.002" 1.70 C-081 .915" .94" 2,040 1,150 .097" ±.005" .038" .029" 880 .080" 16,000 RRA-420

C-087 .875" (7/8) .789" .046" +.003/-.000" .043" .777" ±.007" .042" ±.002" 2.00 C-087 .991" 1.01" 2,202 1,300 .105" ±.005" .040" .031" 880 .086" 15,000 RRA-430

C-093 .938" (15/16) .843" .046" +.003/-.000" .047" .830" ±.007" .042" ±.002" 2.30 C-093 1.058" 1.08" 2,355 1,550 .112" ±.005" .043" .033" 880 .094" 14,000 RRA-440

C-100 1.000" (1) .900" .046" +.003/-.000" .050" .887" ±.007" .042" ±.002" 2.70 C-100 1.130" 1.15" 2,517 1,800 .120" ±.005" .046" .035" 880 .100" 12,500 RRA-450

C-112 1.125" (1-1/8) 1.013"

±.004".005"**

.056" +.004/-.000" .056" .997" ±.008" .050" ±.002" 4.00 C-112 1.267" 1.30" 3,370 2,200 .135" ±.007" .052" .040" 1250 .112" 11,500 RRA-460

C-125 1.250" (1-1/4) 1.126" .056" +.004/-.000" .062" 1.110" ±.008" .050" ±.002" 5.10 C-125 1.415" 1.44" 3,735 2,700 .150" ±.007" .057" .044" 1250 .124" 10,500 RRA-470

C-137 1.375" (1-3/8) 1.237" .056" +.004/-.000" .069" 1.22" ±.008" .050" ±.002" 6.10 C-137 1.555" 1.58" 4,111 3,350 .165" ±.007" .062" .048" 1250 .138" 9,500 RRA-480

C-150 1.500" (1-1/2) 1.350" .056" +.004/-.000" .075" 1.331" ±.008" .050" ±.002" 7.60 C-150 1.691" 1.72" 4,486 4,000 .180" ±.007" .069" .053" 1250 .150" 8,500 RRA-490

C-162 1.625" (1-5/8) 1.483"±.005".005"**

.068" +.004/-.000" .071" 1.463" ±.010" .062" ±.003" 11.00 C-162 1.853" 1.88" 5,506 4,650 .195" ±.007" .075" .058" 1920 .162" 8,000 RRA-491

C-175 1.750" (1-3/4) 1.576" .068" +.004/-.000" .087" 1.555" ±.010" .062" ±.003" 12.90 C-175 1.975" 2.01" 6,526 5,300 .210" ±.007" .081" .062" 1920 .174" 7,500 RRA-492

C-200 2.000" (2) 1.800" .068" +.004/-.000" .100" 1.777" ±.010" .062" ±.003" 16.20 C-200 2.257" 2.30" 7,410 7,000 .240" ±.007" .091" .070" 1920 .200" 6,000 –

C

TO ORDER DIFFERENT MATERIAL/FINISHES,APPEND SUFFIX WITH YOUR CHOICE:

"NONE" • -BC • -SS • -ZD • -Z3

1. Verify C-shape design and appearance.2. Measure the shaft diameter (Ds).3. Measure the ring outside diameter (G).4. Measure the ring thickness (T).5. Find the part in the chart.

W

DsDg

T d

S Max

DfG

0 5

1015

3

20

25

The C-clip holds a timer bell in place on a kitchen timer.

A C-clip is used to hold the thrust bearing in place.

W

DsDg

T d

S Max

DfG

Applications

Prices, materials, dimensions, tolerances, designs, and grades subject to change without notice. © 2017 G.L. Huyett

SALES@HUYETT.COM

141For detailed specifications and tolerances, visi t Huyett.com.

Suffix Material/Finish

Larger sizes may be available upon request.

** F.I.M. (Full Indicator Movement) – Maximum allowable deviation of runout between groove and shaft.

1 Based on housings/shafts made of cold rolled steel. For more information on thrust load and safety factor see pages 14 & 15.

2 For plated rings add .002" to the listed maximum thickness. Maximum thickness will be a minimum of .0002" less than the listed groove width (W) minimum.

Item#

ShaftDiameter

Groove Size Ring Size & Weight Item#

Clearance Diameter Thrust Load1 Square Corner Abutment

Maximum Section Allowable Corner Radii & Chamfers

Max.Load

w/R Max.or Ch Max.

EdgeMargin

RPM LimitsStandard Material

Use with Applicator

Diameter Width Depth Free Diameter

Thickness2 WeightPer

1,000 pcs.

Free Outside Diameter

Reference

Installed in Groove

Ring SafetyFactor of 3

Groove Safety

Factor of 2

Ds Dg Tol. W Tol. d Df Tol. T Tol. lbs. G L2 Prlbs.

Pglbs.

S Max.

Tol. R Max.

Ch Max.

P'rlbs.

Y

C-075 .750" (3/4) .676"

±.003".004"**

.046" +.003/-.000" .037" .665" ±.007" .042" ±.002" 1.50 C-075 .845" .87" 1,878 1,000 .090" ±.005" .036" .027" 880 .074" 17,500 RRA-280

C-081 .812" (13/16) .732" .046" +.003/-.000" .040" .721" ±.007" .042" ±.002" 1.70 C-081 .915" .94" 2,040 1,150 .097" ±.005" .038" .029" 880 .080" 16,000 RRA-420

C-087 .875" (7/8) .789" .046" +.003/-.000" .043" .777" ±.007" .042" ±.002" 2.00 C-087 .991" 1.01" 2,202 1,300 .105" ±.005" .040" .031" 880 .086" 15,000 RRA-430

C-093 .938" (15/16) .843" .046" +.003/-.000" .047" .830" ±.007" .042" ±.002" 2.30 C-093 1.058" 1.08" 2,355 1,550 .112" ±.005" .043" .033" 880 .094" 14,000 RRA-440

C-100 1.000" (1) .900" .046" +.003/-.000" .050" .887" ±.007" .042" ±.002" 2.70 C-100 1.130" 1.15" 2,517 1,800 .120" ±.005" .046" .035" 880 .100" 12,500 RRA-450

C-112 1.125" (1-1/8) 1.013"

±.004".005"**

.056" +.004/-.000" .056" .997" ±.008" .050" ±.002" 4.00 C-112 1.267" 1.30" 3,370 2,200 .135" ±.007" .052" .040" 1250 .112" 11,500 RRA-460

C-125 1.250" (1-1/4) 1.126" .056" +.004/-.000" .062" 1.110" ±.008" .050" ±.002" 5.10 C-125 1.415" 1.44" 3,735 2,700 .150" ±.007" .057" .044" 1250 .124" 10,500 RRA-470

C-137 1.375" (1-3/8) 1.237" .056" +.004/-.000" .069" 1.22" ±.008" .050" ±.002" 6.10 C-137 1.555" 1.58" 4,111 3,350 .165" ±.007" .062" .048" 1250 .138" 9,500 RRA-480

C-150 1.500" (1-1/2) 1.350" .056" +.004/-.000" .075" 1.331" ±.008" .050" ±.002" 7.60 C-150 1.691" 1.72" 4,486 4,000 .180" ±.007" .069" .053" 1250 .150" 8,500 RRA-490

C-162 1.625" (1-5/8) 1.483"±.005".005"**

.068" +.004/-.000" .071" 1.463" ±.010" .062" ±.003" 11.00 C-162 1.853" 1.88" 5,506 4,650 .195" ±.007" .075" .058" 1920 .162" 8,000 RRA-491

C-175 1.750" (1-3/4) 1.576" .068" +.004/-.000" .087" 1.555" ±.010" .062" ±.003" 12.90 C-175 1.975" 2.01" 6,526 5,300 .210" ±.007" .081" .062" 1920 .174" 7,500 RRA-492

C-200 2.000" (2) 1.800" .068" +.004/-.000" .100" 1.777" ±.010" .062" ±.003" 16.20 C-200 2.257" 2.30" 7,410 7,000 .240" ±.007" .091" .070" 1920 .200" 6,000 –

EXTERNAL – C-CLIP

Additional attribute data on adjacent page.

C

### = CARBON SPRING STEEL, PHOSPHATE###-BC = BERYLLIUM COPPER, PLAIN ###-SS = PH 15-7 MO STAINLESS STEEL, PLAIN###-ZD = CARBON SPRING STEEL, ZINC YELLOW###-Z3 = CARBON SPRING STEEL, ZINC TRIVALENTMaterial/finish combinations may not be available in all sizes. More finishes available, see page 22 for a complete listing.

Hardness Ranges: C-clipsMaterial Size Range Scale Rockwell Hardness

(blank)Carbon Steel,(SAE 1060-1090)

12 – 1821 – 4350 – 8187+

15N30N30NC

86 – 88.5♦♦

67.5 – 7266 – 7147 – 52

-SSStainless Steel,(PH 15-7 Mo)

12 – 1821 – 8187+

15N30NC

82.5 – 86♦♦

63 – 69.544 – 51

-BC Beryllium Copper12 – 6268 – 8187+

15N30NC

77 – 82♦♦

54 – 6234 – 43

♦♦ Hardness cannot be checked with any degree of accuracy directly on these rings.

An E-clip wraps around the shaft with three toothlike grip points that yield greater thrust load ratings than C-clips and typically dig into deeper grooves than a constant section wire ring.

C-clips use a tapered section to maintain circularity and possess toothlike grip points to hold the clip in place. Provides a lower profile than that of an E-clip.

Applications