Ferno Australia Export Catalogue...Ferno Australia’s purpose-built factories are located around the country – in Brisbane, Perth and Melbourne – all of which are equipped with

When it’s critical

Ferno Australia Export Catalogue

Ferno Australia – Exporting When It’s Critical

Ferno Australia’s equipment has been trusted for more than 35 years by first responders who look to our products for their renowned quality, reliability and innovative technology. No matter where we live, at some point our customers will be faced with the responsibility of saving lives from either a natural or man-made disaster. How prepared they are will depend on how well we support them to plan in advance.

Whether used on scene at accidents, emergencies, rescues and workplace incidents; for treating and transporting the wounded or deceased; providing the optimum rescue and safety performance through pre-and post-incident response, Ferno Australia’s equipment is designed, manufactured and available to be distributed around the world to perform when it’s critical.

Our many patented designs – some of them now industry standard and award-winning – are built for a purpose yet designed with superior function and form. From the sweltering heat of underground mines to baron deserts or windy, ice-capped mountains, our gear is built tough to withstand the harshest world-wide environments, and tailored to help people accomplish their mission wherever or however challenging it may be – quicker, safer and more precisely.

Our locally manufactured products include:

Industrial and rescue stretchers •A full selection of patient restraints and harnesses •Stretcher locks and accessories •Carry chairs •Emergency softpacks and holsters •First aid containers •Industrial height safety and rescue harnesses •Arbor and industrial sit harnesses •Rock climbing and recreational harnesses •Industrial tripods •Rescue and recovery systems and accessories •Height safety softgoods •Rope and rope care products •Roof anchors and brackets •

Ferno Australia’s purpose-built factories are located around the country – in Brisbane, Perth and Melbourne – all of which are equipped with complete engineering facilities with a highly skilled workforce and dedicated research and development teams. Our warehouse and distribution centre maintains an inventory of products ready to meet your required demands.

Ferno Australia is one of the fastest growing international suppliers of emergency and rescue products within the Ferno group of companies due to its many decades of experience, combined knowledge, industrial design expertise, responsiveness and competitive pricing. Today, we deliver more than 10,000 product types to customers all around the world including Australia, New Zealand, UK, Europe, North America, Asia Pacific and the Middle East.

Ferno Australia and our various manufacturing divisions welcome the opportunity to support your needs with the finest equipment, specialised modifications, accessories and parts. In Ferno Australia’s equipment, your customers are assured of unmatched functionality capable of enduring any harsh environment, giving them many years of trusted support when it’s critical.

1

Contents

Rescue and Industrial Stretchers and Accessories (page 2 to 4)Vertical Rescue Stretcher Lifesaver StretcherRes-Q-Mate Stretcher Stretcher Handle Shoulder HarnessStretcher HandlesAdjustable Lifting BridlesTagline SetEmergency Pole StretchersFibreglass Backboard

Patient Restraint (page 5 to 6)Adult HarnessesChild HarnessesBaby Capsule HarnessPsychiatric Restraint SetPatient Restraints

Stretcher Accessories (page 6 to 8)Floor LocksIV PolesEquipment Bracket Torch HolderBariatric Stretcher AccessoriesMattresses

Patient Handling (page 8 to 9)Walk BeltDisposable Emergency StretcherCarry SheetsCarry Chairs

Casualty Room, Disaster, Splinting (page 10) Stretcher Carry CasesMobile Privacy ScreenBody BagsAir SplintsCardboard Splint

Emergency Softpacks, Kits and Holsters (page 11 to 12)Oxygen Carry KitsTrauma KitsBelt HolstersGlove Pouches Belt First Aid KitsFirst Aid Packs

First Aid Containers (page 13)First Aid BoxesCompact First Aid Boxes

Harnesses (page 14 to 21)Full Body HarnessesArbor Sit HarnessesIndustrial Sit HarnessesRock Climbing and Gym HarnessesRappel BeltRescue Triangular HarnessPatient Lifting Sling

Height Safety Softgoods and Kits (page 22 to 31)LanyardsPole StrapsRoofers KitTower Workers KitTrain KitContainer KitPole Top Rescue KitExodus KitIndustrial SlingsGirth Hitch SlingRescue Personal LanyardEtriers & Aiders Daisy ChainsSpike PadsTool StropsTool Wrist LoopsThrow BagsRope Savers

Rope and Rope Care Products (page 32 to 34)RopeRope and Harness WashRope ProtectorsRope Safety LinesRope Finishing

Bags and Climbing Accessories (page 35 to 36)Rope BagsMulti PouchGrab BagGear BagExpedition Duffel BagBagpackChalk BagsChalk Bag BeltGear SlingCompression CapNeat SeatFloor Belay Station Sling

Roof Anchors & Brackets (page 37 to 38)Roof Ladder BracketsRoof AnchorsLadder Systems

Edge Management, Rescue & Escape (page 39 to 43)TripodRescue WinchDavit SystemArachnipod Edge Management SystemRes-Q-Link Recovery PoleRecovery SystemMini Haul KitRescue Pulley SystemRescue Spreader BarEmergency Descenders

Products for Release 2010 (page 44)Remote Attachment Device Gate Opening PulleyGlass Management KitCentrepoint Hardpoint Rescue HarnessStretcher Equipment Bridge

1

Ferno Vertical Rescue Stretcher Code VRES STRETCH

The Ferno Vertical Rescue Stretcher’s roll-up, compact and lightweight design makes it ideal for high angle, confined space, horizontal or vertical rescue. When deployed the wrap-around concept becomes rigid and gives the patient a feeling of security as well as protecting limbs and body from further injury during evacuation procedures. For spinal injuries the addition of a Ferno KED will assist with patient immobilisation. The Vertical Rescue Stretcher is fitted with many carry handles as well as six lifting slings that provide a good variety of options for transportation and lifting. Also supplied standard is an integral and comprehensive, colour-coded, full body restraint system that includes a padded head pad, six over body restraints, shoulder and groin straps along with a generous foot strap to assist with vertical lifts. When not in use the Vertical Rescue Stretcher rolls up and is easily housed within the Cordura storage bag which doubles as a backpack. An optional lifting kit (VKIT-FTRK) has been designed to provide optimal lifting during horizontal and vertical applications.

Key Features

Constructed from internal high density polyethylene with a mixture •of tough 1350 and 1000 denier Cordura with a heavy polyurethane coatingVarious carry handles and lift slings provide many options for transport •or evacuation liftingIntegral, colour-coded, head, shoulder, groin and foot restraints •Six exterior restraint straps assist to wrap and secure stretcher around the patient •Includes a Cordura storage bag with backpack shoulder straps •

Product Specifications

Length Width Weight Load Limit Horizontal Load Limit Vertical

202 cm 77 cm 8 kg 350 kg 250 kg

Ferno LifeSaver Rescue Stretcher Code FWELS

The Ferno LifeSaver Stretcher is a modern version of the traditional Neil Robertson Stretcher and is designed to be both quick and easy to use in horizontal and vertical lift situations where minimum bulk is a consideration. The LIfeSaver Rescue Stretcher comes complete with integral leg and torso flaps that envelope the patient like a traditional corset which is complimented by a simple head restraint, five built-in patient restraints and a long foot strap. It is fitted with various carry handles and stainless steel rings that are used at the foot and head end for guiding and lifting the stretcher in vertical applications. The compact, roll-up design makes storing and transporting the stretcher easy. The LifeSaver Rescue Stretcher is made with full length 5 mm ribs interwoven in tough 1000 denier, high tenacity nylon fabric to provide full body splinting in a very narrow patient package.


Length Width Height Weight Load Limit

153 cm 104 cm 3 cm 5 kg (full system) 159 kg

Optional Lifting Kit VKIT-FTRK

2 3

Resc

ue a

nd In

dust

rial S

tret

cher

s an

d A

cces

sorie

s

Ferno Res-Q-Mate Rescue Stretcher Code FWE2060


Length Width Depth Weight with pack & bridle Load Limit

Folded & Packed 100 cm 28 cm 18 cm 17.5 kg -

Deployed 185 cm 28 cm 10 cm 17.5 kg 180 kg

Ferno’s Res-Q-Mate Rescue Stretcher is specifically designed for rapid evacuation in building collapses, mine rescue, helicopter and confined space rescue. The rigid frame also provides an ideal platform to evacuate suspected spinal injuries. Torso and leg flaps comfortably wrap around the patient while a headrestraint and four adjustable, colour-coded, chest, thigh and lower legs straps assist in securing the patient. Additional restraint is provided via an exterior v-shaped arm strap and a long foot end strap designed for a figure-of-eight configuration. There are also six built-in carry handles that provide rescuers with various carrying options. Constructed of high grade stainless steel and quality synthetic materials the Res-Q-Mate is impervious to oil, water, grease and other petroleum products making it easy to clean and also resistant to rot and corrosion. When not deployed the unit folds compact and sits neatly inside a heavy-duty reflective backpack. Each Ferno Res-Q-Mate Rescue Stretcher comes complete with a four-point lifting bridle, 50 m tag line system, adjustable headrestraint, head pillow and reflective backpack.

Res-Q-Mate Lifting Bridle Code BRB-2063

Designed around the lifting points found on the Res-Q-Mate Stretcher, this bridle is fixed in length for weight distribution and supplied with four lightweight karabiners.

Ferno Res-Q-Mate Stretcher Handle Kit Code FWE2062 (Carry Handles pair with bag)

When the Ferno Res-Q-Mate Stretcher needs to be carried for any lengthy period the Handle Kit offers greater carrying options for the rescuer by providing more comfortable and lift friendly positions. The Handle Kit conveniently locks in position at either end of the stretcher. Ideally the Res-Q-Mate Handle Kit should be used with the Ferno Stretcher Handle Shoulder Harness so that the combined weight of the patient and stretcher can be transferred from the arms and evenly shared through the shoulders, chest and back. The Handle Kit is supplied in a carry bag which can be attached to the Res-Q-Mate carry bag if required.

Designed to be attached to either the Res-Q-Mate Handle Kit or the Traverse Stretcher Handles. For longer hauls and walk outs the Shoulder Harness combined with a handle kit offers rescuers a more comfortable, balanced lift options and transfers weight solely from the arms and distributes to the shoulders, chest and back.

Ferno Stretcher Handle Shoulder Harness Code BRH-2061

2 3

Rescue and Industrial Stretchers and Accessories

Ferno Emergency Pole Stretcher Code FWE108AF (dual fold) and FWE108A (single fold)

The Ferno Emergency Pole Stretchers 108A and 108AF are lightweight, high-strength emergency stretchers suitable for first aid response, industrial sites and casualty rooms. They are made with PVC coated nylon covers that are heat sealed making them resistant to blood, body fluids and mildew and easy to clean. All Ferno Emergency Pole Stretchers feature lightweight aluminium poles with contoured, flexible hand grips for easy handling. Both stretchers fold however 108AF also hinges at the centre permitting the stretcher to dual fold for compact storage. Available in standard emergency orange with optional wall mounted carry cases. Accessories include carry case for the 108AF model MCC-383B and MCC-384C for the 108A.



231 cm 55 cm 14 cm 6 kg 159 kg

Ferno Adjustable Lifting Bridle Code BRB-TLB (24 mm screw gate karabiner) and BRB-TLB-TX11S (65 mm screw gate karabiner)

Key Features

Individually adjustable arms •Drop forged lifting ring, adjusters and sliding bar buckles •UV resistant webbing rated at 2250 kg (22 kN) •Additional wear strips where hardware meets webbing •Big bright orange tabs for easy adjustment • Supplied with 4 steel screw gate karabiners •(Triplock karabiners available as a made to order option)

The Ferno Adjustable Lifting Bridle is available with a variety of karabiner options. Common features include adjusters on each of the four arms so the stretcher can quickly be set at the best angle for patient comfort or for the individual rescue requirements. The BRB-TLB is supplied with four steel, screw gate karabiners with 24 mm gate opening suitable for use with the Traverse Titan and Gazelle Stretchers. The BRB-TLB-TX11S is supplied with four steel, screwgate karabiners with a 65 mm gate opening making it suitable for use with the Ferno 71 Series stretchers.

Ferno Tagline Set Code VRES TAG LINE

A tagline controls the movement of the stretcher during a short haul or hoist operation. The Ferno Tagline Set includes 50 m of 3 mm cord, a steel oval maillon rapide (quick link) and a quick release stainless steel snap shackle. It is stored in a bag that is large enough to fit other stretcher accessories if required. Weight 600 g.

Ferno 889P Fibreglass Backboard Code BSBF-889P (with 3 velcro restraints), BSBF-889P/B (no restraints)

Patient and user comfort is paramount in the Ferno 889P Fibreglass Backboard design.

10 raised hand grips that allow easy hand access •Wide and thick handgrip spaces for comfortable lifting •10 restraint pins •Foot and head ends are tapered for manoeuvring in confined spaces •Concave surface which cradles patient •X-ray transparent •Dimensions: L 183 cm x W 41 cm •Weight 8 kg •Load Limit 159 kg •

Key Features

4 5

Resc

ue a

nd In

dust

rial S

tret

cher

s an

d A

cces

sorie

s

Ferno 417 Adult Harness Code BRH-417

Developed in conjunction with various Australian ambulance services, the multi-functional two-piece design allow users to fit or remove the harness to the patient while on the stretcher. The design also allows the harness to be fitted under or over existing linen, allowing for easier, uninterrupted transfer of patients. The Ferno 417 Adult Harness is part of a complete suite of approved and compliant harness systems that provides restraint for newborns to obese adults.

The Ferno 417 Adult Harness has been dynamically crash tested to 20 G forward and 10 G sideward and is compliant with ambulance crash test standards AS/NZS 4535:1999. *

Ferno QR Pedi Mate Code BRH-678-QR

The Ferno QR Pedi Mate is an innovative, fully adjustable, seven point harness and restraint system that provides the ideal solution for the safe control of paediatrics during ambulance transportation. The Ferno QR Pedi Mate can be used with the backrest inclined or supine. An illustrated patient pad and simple quick release buckles allow for efficient fitting and removal from stretcher. The patient restraints and buckles are smaller and low profile and provide a safe, logical and non intrusive fit to paediatrics. The Ferno QR Pedi Mate rolls to a compact size, allowing for ease of storage and quick retrieval and is suitable for paediatrics between 3.2 kg and 18 kg. The Ferno QR Pedi Mate Harness is part of a complete suite of approved and compliant harness systems that provides restraint for newborns to obese adults.

It has been dynamically crash tested with a 9 kg and 18 kg crash dummy to 20 G forward and 10 G sideward as per ambulance crash test standards AS/NZS 4535:1999.*

Ferno Baby Capsule/Convertible Chair Harness Codes BRH-419 (Baby Capsule Harness), BRH-420 (Convertible Chair Harness)

Ferno Baby Capsule and Convertible Chair Harnesses have been developed as an interface between various Ferno stretchers and Australian style baby capsules and convertible chair / capsules and form part of the complete suite of approved and compliant harness systems that provides restraint for newborns to obese adults. The harnesses have been dynamically crash tested to 20 G forward and 10 G sideward and are compliant with ambulance crash test standards AS/NZS 4535:1999.*

* Can only be fitted and used in conjunction with stretchers that have been fitted with the Ferno Harness Mount Kit Model 417/MKIT.

The Universal Psychiatric Restraint Set is designed for use on a variety of stretchers or beds. It features two single wrist cuffs and a double ankle cuff strapping system. Each cuff features a padded, double overlap, strap system secured with velcro and is adjustable to a variety of limb sizes. An adjustable tie down loop provides some flexibility in attachment points and length of strap and is fitted with a quick connect, double action, industrial rated buckles. Machine washable.

Universal Psychiatric Restraint Set Code BRH-MPR

4 5

Patie

nt H

andl

ing Patient Restraint

Made from die-cast stainless steel the Ferno Floor Lock provides unrivalled strength, yet is simple in design and use. The stretcher floor lock hooks are designed to fully capture the front and rear attachment points of the stretcher with one simple pull of the floor lock lever. When fitted correctly the Ferno Floor Lock combined with an approved Ferno harness restraint will provide the user with a complete AS/NZS 4535:1999 system that safely and securely restrains a patient to the stretcher and the stretcher to the ambulance. Ferno Floor Locks have been dynamically crash tested to 20 G forward and 10 G sideward and are compliant with ambulance crash test standard AS/NZS 4535:1999

Ferno 2030 IV Pole Code LAIV-2030

The Ferno 2030 IV Pole is a lightweight permanently attached IV pole that conveniently fits within the side rail of most Ferno stretchers. For after-market installation, each Ferno 2030 IV Pole comes complete with a new side rail for quick and easy fitting. Includes bracket mount for IV accessories and hooks for two IV bags. The IV pole is for mounting on the (patient) left hand side of stretcher only.

Ferno Floor Locks Code LA26-FL and LA50-FL

Ferno 2427 Floor Lock Code FWMFL

This floor lock is designed to be quickly removed or fitted to a vehicle floor. The front and rear locking mechanism is attached by steel wing-nuts, allowing removal and fitting by hand to the fixed, low profile base. This allows full access and storage space in the vehicle for other equipment when a stretcher is not required. The rear locking mechanism utilises a simple but effective spring loaded pistol grip handle that captures the rear of the stretcher but swings low when not in use. Ideal for multi-purpose fleet vehicles or situations where low speed transportation is required. Made from heavy-duty steel with a chrome plated finish. The Ferno 2427 does not meet all aspects of ambulance crash test standard AS/NZS 4535:1999.

LA26 FL is compatible with most 26 and 2650 series stretchers

LA50 FL is compatible with most 50 series stretchers

Ferno Patient Restraints

Ferno offers a complete range of restraints with various colour and length options. These include:

BRR-TRAVREST Two-piece five foot double bar buckle BRR-43017 One-piece seven foot metal buckle BRR-43017P One-piece seven foot plastic buckle BRR-43025 Two-piece five foot metal buckle BRR-43025SC Two-piece five foot metal buckle with speed clip connectors BRR-43025P Two-piece five foot plastic buckle BRR-43025PSC Two-piece five foot plastic buckle with speed clip connectors BRR-43027 Two-piece seven foot metal buckle BRR-430VSC Velcro one-piece restraint, variable in length, with speed clip connectors

6 7

Patient Handling

Stre

tche

r Acc

esso

ries

Ferno Bariatric Push-Pull Handles Codes FWEPF-BPH

The Ferno Bariatric Push-Pull Handles have been designed by Ferno Australia in conjunction with various Australian ambulance services.

They provide emergency personnel with ergonomically positioned handle(s) that allow head and foot end operators to safely and carefully guide and propel a bariatric patient up to 454 kg on stretcher when being transported in the stretcher’s lowest position. Each handle kit is supplied with mount brackets and when fitted do not interfere with the stretcher’s operations.

The handles can be purchased as a full head and foot end kit or individually. The head end handle kit attaches to the Powerflex stretcher frame while the foot end handle kit attaches to the Ferno LBS Jr.

Bariatric Harness shown with optional LBS Jr Mattress

Ferno has drawn on its understanding of current ambulance crash standards and knowledge of Australian fall protection standards to produce an extensive bariatric harness that will withstand the excessive G forces should a bariatric patient be involved in an accident during transportation. The harness is constructed with oversize high strength webbing with adjustable buckles and attaches to both the standard stretcher harness mount points as well as six pre-positioned, floor mounted tie down points via 35 kN steel karabiners. The 417 Bariatric Harness is compatible with the Ferno Powerflexx stretcher fitted with the Ferno LBS Jr.

Ferno 417 Bariatric Harness Code FWE-PFBH

Ferno Eclipse Torch Holder Code LA-2080

The Ferno Eclipse Torch Holder allows a small torch to be placed virtually anywhere on a stretcher for hands free illumination of the immediate area. By adjusting the integral stretch cord it allows manipulation of the torch so that it can be positioned at various angles allowing for perfect adjustment and illumination.

Ferno 2020 Equipment Bracket Code FWE2020

The Ferno 2020 Equipment Bracket is compatible with most Ferno stretchers. It allows for convenient storage of gear while the stretcher is not in an ambulance. The bracket is spring loaded which allows it to automatically retract within the stretcher frame when not in use.

6 7

Stretcher Accessories

Ferno Walk Belt Code FWE-WB-LS

The Ferno Walk Belt has been purpose designed for paramedics and emergency healthcare professionals to assist patients while walking, particularly where an ambulance stretcher, chair or board can not easily be used or for patients that are able to walk a short distance with some assistance. The Ferno Walk Belt secures around a patients waist and is fitted with eight handles, four horizontal and four vertical handles as well as 2 leg straps that substantially reduces the effort required to assist a patient whilst walking. The Ferno Walk Belt can be machine washed and reused repeatedly.

Ferno Bolstered Mattress Code MCM-2650 (26 Series mattress) and MCM-50 (50 Series mattress)

Ferno has designed a bolstered mattress to suit the harsh environment and road conditions experienced in Australia. Our mattress combines four layers of foam with varying densities and shapes to provide the ultimate comfort for patients. Slow recovery foam with bolstered sides creates a centring action that stabilises patients, providing support in transit. Each mattress is covered in soft, flexible, medical grade vinyl on the patient area with durable, hard wearing, medical grade vinyl on the underside to prevent mattress damage. Each mattress is heat sealed to prevent ingress of fluids.


Length Width Load Limit

200 cm 75 cm 200 kg

Ferno Disposable Emergency Stretcher Code DPL-DS

The Ferno Disposable Emergency Stretcher is compact, lightweight and ideal as a back up evacuation or transfer sheet. Made from non-woven polypropylene it features 10 integral carry handles providing a safe working load of 200 kg. Dimensions 200 cm x 75 cm.

Ferno 341 Carry Sheet Code FWE341

The Ferno 341 Carry Sheet is widely accepted as a vital aid in the rapid evacuation of non-ambulance patients from hazardous situations. Suitable for use with medical, surgical, psychiatric and geriatric patients, it is instantly available in emergency situations. Constructed of heavy-duty rip-stop PVC, the Ferno 341 Carry Sheet is easily cleaned and reusable.


Length Width SWL

68 cm 175 cm 159 kg

8 9

Patie

nt H

andl

ing

Ferno Compact Carry Chairs

The Ferno Compact Carry Chairs are simple, effective and lightweight for use in the ambulance and pre-hospital environments. They fold to a compact size for convenient handling and in vehicle storage. A tall back section offers support across the patient’s shoulders and a large foot area is also provided for patient comfort. Moulded foot and head-end hand grips enhance comfort and stability for the attendant. Each model is supplied standard with chest and ankle restraints. Available in two widths, the most narrow (38 cm) is suitable for narrow aisle evacuation such as aircraft, bus and trains. An optional storage/carry case is available.

The Ferno Carry Chair 2040 has two large 150 mm rear wheels and is supplied with 1 x 50 mm plastic buckle chest restraint and 1 x 25 mm plastic buckle ankle restraint.


Ferno Carry Chair 2041 Code FWE2041

The Ferno Carry Chair 2041 has all the features of the Ferno Carry Chair 2040, however it is 20 mm narrower and has two additional wheels positioned under the footplate at the front of the chair to assist with the manoeuvrability in confined spaces and aisle ways such as those found on buses, trains and aircraft. The Ferno Carry Chair 2041 is supplied with 2 x 100 mm velcro chest and thigh restraints and 1 x 25 mm plastic buckle ankle restraint.


The Ferno Carry Chair 2042 has the same chair structure as the 2041, with small front swivel wheels under the foot plate but has the wider width of the 2040 at 400 mm. The 2042 is supplied with 2 x 50 mm metal buckle restraints.




Open 126 cm 40 cm 91 cm 11 kg 160 kg

Folded 81 cm 40 cm 20 cm 11 kg -


Open 126 cm 38 cm 91 cm 12 kg 160 kg



Open 126 cm 38 cm 91 cm 12 kg 160 kg



8 9

Patient Handling

Ferno Stretcher Carry CasesFerno offers a range of carry cases to suit many of the stretchers shown in this catalogue. Made from heavy-duty, rip-stop, PVC.

MCC-383B Carry case for 108AF Pole StretcherMCC-385A Carry case for Ferno 11 StretcherMCC-889 Carry case for Najo Backboards and 889P Spineboard MCC-385C Carry case for EXL and Saver Scoop Stretchers.MCC-387A Carry case for one-piece basket stretchersMCC-387C Carry case for two piece basket strechersMCC-2040 Carry case for Ferno 2040 Series Stair Chairs031-4023 Carry case for Ferno 59T and 59 Evacuation Chair

These Body Bags are a large size with a zipper on three sides for ease of body handling. The Body Bags are made from heavy duty PVC, and are available with or without eight integral handles for comfortable handling during transportation.

Body Bags Codes DPBB and DPBB-H

Length Width

2080 mm 900 mm


Ferno Mobile Privacy Screen Codes CRP-3M

The Ferno Mobile Privacy Screen is a lightweight, stable and secure screen. Each panel is made with lightweight vinyl that is heat sealed and easy to clean. The rigid frame is constructed from anodised aluminium for easy manoeuvrability and the legs and castors are removable so the unit can be packed flat for storage or freight.


Width Height

Folded 66 cm 158 cm

Extended 192 cm 158 cm

Cardboard Splint Codes SVCB-S (small) and SVCB-L (large)

The Cardboard Splint is a low-cost, compact and convenient alternative with the capacity to immobilise a broad range of injuries. Available in two sizes.


Length Width

Large 77 cm 33 cm

Small 41 cm 25 cm

Air Splints Codes SVAS (set of six), SVAS-A (arm), SVAS-HA (half arm), SVAS-W (hand wrist), SVAS-L (leg), SVAS-HL (half leg) and SVAS-F (foot and ankle)

Air splints provide a low-cost alternative for the immoblisation of extremities and are easy to apply and remove as well as being X-ray transparent. All inflatable splints incorporate an inflation extension with a single-handed closure clamp. Available in a full set of six or in individual sizes.

10 11

Casu

alty

Roo

m, D

isas

ter,

Splin

ting

Ferno Primary Response Kit R400 Code FAPR400

The Ferno Primary Response Kit R400 is an uncomplicated design that allows universal use. The internal layout of the Ferno Primary Response Kit is a combination of fixed, clear faced pockets and removable clear faced modules. A large external pocket further enhances the user’s ability to customise the content layout. The well laid out design and bulky storage areas provide plenty of options for end users. The kit features a comfortable back harness and can also be carried by top mounted carry handle. This kit is available in red and blue.

Dimensions: L 31 cm, W 15 cm, H 50 cm

Ferno Paramedic Rescue Backpack R300 Code FAPR300

The Ferno Paramedic Rescue Backpack is large kit with spacious internal and external storage options. There is a total of 5 external pockets of varying size. The internal layout is a combination of fixed, clear faced pockets and removable clear faced modules. The long body, uncomplicated design and bulky area provides enough space to stock gear for the largest of scenarios. The kit features a comfortable, tuck-away back harness and can also be carried by top mounted carry handle. This kit is available in red and blue.

Dimensions: L 31 cm, W 15 cm - plus pockets, H 60 cm

Oxygen Therapy Kit Code WM-8AU10001

The Oxygen Therapy Kit is simplistic in design and allows storage of all standard oxygen therapy gear. Incorporated into this exclusive, lightweight design is a carry handle and shoulder strap along with a stretcher attachment strap. All sides of the kit incorporates 10 mm foam padding that offers protection for the oxygen bottle and contents. A clear faced window provides vision to the oxygen regulator and additional cylinder straps ensure the cylinder is held securely. A piggy back module sits on the back of the pack for surplus therapy or resuscitation gear. Supplied standard with distinctive check reflective tape.

Dimensions: L 55 cm, W 13 cm, H 24 cm

Contents not included

9

8

7

4

8

4

5

3

3

2

6

Ferno Belt Holsters and Glove PouchesFerno manufactures and supplies a vast range of belt mounted holsters and pouches that are designed to securely hold instruments, torches, gloves and other commonly used tools of the trade. All items are made from heavy-duty nylon and guaranteed to perform.

1. FAPH800 Fits penlight or instrument (image not shown) 2. FAPH600 Fits penlight, instrument 3. FAPH100 Fits penlight, three additional instruments 4. FAPH200 Fits penlight, three additional instruments, stethoscope, glove pouch 5. FAPH275 Fits penlight, three additional instruments, window punch, stethoscope, glove pouch 6. FAPH400 Fits a resuscitation pocket mask 7. FAPGP100 Fits gloves (one pair) 8. FAPGP200 Fits gloves (five pair) 9. FAPGP250 Fits gloves plus resus shield

10 11

Emergency Softpacks, Kits and H

olsters

Length Width Height

FAHAD-200GR 10 cm 4 cm 14 cm

FAHAD-300GR 14 cm 8 cm 10 cm


Saver Belt First Aid Kits 200GR and 300GR Codes FAHAD 200GR and FAHAD 300GR

Carrying basic personal first aid requirements for work or outdoors is made easy with the Saver Belt First Aid Kits 200GR and 300GR. The kits are available in green.

Saver First Aid Kit 700GR Code FAHAD-700GR

The Saver First Aid Kit 700GR is ideal for home, work and outdoor activities. Numerous inner pouches and elastic loops store and organise a good supply of first aid items. This kit is available in green.

Length Width Height

21.5 cm 7.5 cm 15 cm


Saver First Aid Kit 800GR Code FAHAD-800GR

The Saver First Aid Kit 800GR has numerous inner pouches and elastic loops, making it ideal for storing and organising a variety of first aid items. It is suitable for home, work and outdoor. This kit is available in green.

Length Width Height

25.5 cm 10 cm 14 cm


Saver First Aid Hip Pack 1000GR Code FAHAD-1000GR

The Saver First Aid Hip Pack 1000GR was originally designed to carry airway equipment for lifeguards, but can also be used to carry first-responder supplies or personal gear. This kit is available in green.

Length Width Height

35.5 cm 6.5 cm 5 cm


FAHAD 300GR

FAHAD 200GR

Saver Rescue Trauma Hip Pack 900 Code FAHAD-900RE

The Saver Rescue Trauma Hip Pack 900 is widely used by search and rescue personnel and ski patrollers. It has a surprising amount of storage space and the waist belt straps tuck away when not in use. Available in green.

Length Width Height

36 cm 10 cm 18 cm


12 13

Emer

genc

y S

oftp

acks

, Kits

and

Hol

ster

s

Saver First Aid Kits Code FAF1672G, FAF1772G, FAF1872G

Ferno First Aid Boxes are not a re-badged fishing or tool box but a purpose-designed medical box for first aid use. Each box comes standard with a locking feature, making the kits tamper-proof if desired. Metal hinges demonstrate the quality of Ferno first aid boxes and are purpose-designed to make the boxes durable. Each box has an over-centre catch and a tongue and groove seal, which provides a tighter seal of the box, making them resistant to things such as dust and water. Another unique feature of the Ferno First Aid Boxes is the removable dividers in the white trays, which allow you to greater customise each compartment. The trays also have a generous depth for greater storage and a smooth surface for easy cleaning.

Length Width Depth

FAF1672G 32 cm 18.5 cm 14 cm

FAF1772G 42 cm 22 cm 18.5 cm

FAF1872G 45 cm 25 cm 22 cm

FAF1272G 25.5 cm 11 cm 4 cm

FAF1472G 35.5 cm 14 cm 6 cm


Features

Removable dividers in trays •Deeper trays purpose sized for first aid gear •Tamper-proof lock system •Over-centre catch and tongue and groove sealing •Smooth surface on box lids for labelling •Metal hinges •Resistant to oil and most common chemicals •

FAF1472G

FAF1672G FAF1772G FAF1872G

FAF1472G

FAF1272G

FAF1272G

The Ferno 1272 and 1472 first aid boxes are compact, lightweight and ideal for hiking, travelling or driving as they provide simple storage of your first aid equipment in the car, caravan or in your back pack. The Ferno Compact Kits feature a full length hinge and snap lock lid that ensures a tight and secure close.

Ferno Compact First Aid Boxes Codes FAF1272G FAF1472G

12 13

First Aid Containers

Quick connect buckles

Quick connect buckles

Integrated Chest Ascender

The Ferno Centrepoint 2 Full Body Harness is a versatile, comfortable harness that can be used for a multitude of rescue applications.

Optional FeaturesBattery and self rescuer attachment strap •Flame-proof/anti-static webbing •

The Ferno Centrepoint 2 Ascender Full Body Harness is based on our industry renowned Centrepoint 2. As well as being our most versatile and comfortable rescue harness it also features and integrated chest ascender that provides increased mobility when ascending.

Ferno Centrepoint 2 Ascender Full Body Harness Code VHI CEN FB 2 A

Ferno Centrepoint Full Body Harness Code VHI CEN FB, VHI CEN FB CS (con space), VHI CEN FB CS BS (batt strap)

Ferno Centrepoint 2 Full Body Harness Code VHI CEN FB 2 (basic), VHI CEN FB 2 BS (with optional extra)

FeaturesPole strap attachment points •Front and rear free fall arrest D-ring attachment point •Limited free fall arrest attachment point •Rear free fall arrest attachment point •Extra wide, padded, waist and leg straps for added comfort when •hanging or working for long periods of timeGear loops around the waist for storing excess hardware and gear •Fixed, elasticised leg risers •Australian Standards approved AS/NZS 1891.1:2007 •Versatile design allows use for a multitude of applications •Available XS, S, M, L, XL. Conditions apply for XS and XL •

Optional FeaturesConfined space retrieval attachment points •Battery and self rescuer attachment strap •Flame-proof/anti-static webbing •

Features Versatile design allows use for a multitude of applications •Offset (cranked) pole strap attachment points •Confined space retrieval attachment points •Quick connect buckles on waist and legs •Front and rear free fall arrest D-ring attachment points •Limited free fall arrest attachment point •Gear loops for storing excess hardware and gear •Extra wide, padded waist and leg straps for added comfort •when hanging or working for long periods of timeRemovable moisture wicking 3D mesh back pad provides •unrivalled shoulder and neck protectionFully adjustable rear leg risers to ensure best fit •Australian Standards approved AS/NZS 1891.1:2007 •Available XS, S, M, L, XL. Conditions apply for XS and • XL

Features (additional)

Integrated chest ascender for increased mobility when ascending •Optional chest harness and backpad available to ensure chest ascender •remains close to the body during operation

Work Positioning Fall Arrest Confined Space Rescue Rope Access

• • • • •


• • • • •

14 15

Har

ness

es


• • • •


• • • •


• • • •

Ferno Tower 2 Full Body Harnesss Code VHI TOW 2

FeaturesWide, comfortable, padded seat and lumbar support •large, easy access, pole strap attachment points that are positioned low on the harness to provide a balanced and comfortable positionNon-metallic rear dorsal free fall arrest extension strap •Front free fall arrest attachment points •Neoprene covers are supplied on all upper metal buckles •for electrical safetyAustralian Standards approved AS/NZS 1891.1:2007 •Available XS, S, M, L, XL. Conditions apply for XS and XL •

Optional FeaturesFlame-proof/anti-static webbing •

FeaturesPole strap attachment points •Confined space retrieval attachment points •Front and rear free fall arrest attachment points •Laterally positioned O-rings will allow the harness to flex, adjust •and conform to all body shapes and sizesQuick connect buckles •Lumbar support strap •Quick and easy to don and adjust •Breathable rear mesh panel keeps the harness in shape ready •for easy donningAustralian Standards approved AS/NZS 1891.1:2007 •One size fits all •Labelling/screenprinted mesh available - conditions apply •

Optional FeaturesSupplied with self locking steel buckles •Flame-proof/anti-static webbing •

FeaturesFront free fall arrest attachment points •Rear free fall arrest D-ring attachment point •Breathable rear mesh panel keeps the harness in shape ready •for easy donning Multi purpose, general fall arrest harness •Forged steel sliding buckles for waist, chest and leg adjustments •providing correct and secure fitAustralian Standards approved AS/NZS 1891.1:2007 •Available XS, S, M, L, XL. Conditions apply for XS and XL •Labelling/screenprinted mesh available - conditions apply •

Optional FeaturesPole strap attachment points •Confined space retrieval attachment points •Waist belt •Dorsal extension •Flame-proof/anti-static webbing •

O-rings allow harness to flex,

adjust and conform to body shapes

Ferno Flexx QC Full Body Harness Code VHI FLEXX QC, VHI FLEXX (steel buckles)

Ferno Tradesman Full Body Harness Code VHI TRADE B (Basic), VHI TRADE CSW (with optional accessories)

14 15

Harnesses

1

2

3

Hi-Safe FH17 Full Body Harness Code HS-FH17

Ferno Tower 3 Full Body Harness Code VHI TOW 3

FeaturesComfortable, padded and stable seat and lumbar support •Rear dorsal free fall arrest extension strap •Front free fall arrest attachment points •Confined space retrieval attachment points •Reflective, photo luminescent rear pad •Quick connect adjustable leg buckles •Rear gear loops •Stainless steel componentry •Large, easy access, pole strap attachment points set low •to provide a balanced and comfortable positionNeoprene covers are supplied on all upper metal buckles for electrical safety •The most comfortable and stable harness available for suspended tower work •Australian Standards approved AS/NZS 1891.1:2007 •Available XS, S, M, L, XL. Conditions apply for XS and XL •

Optional FeaturesFlame-proof/anti-static webbing •

12

3

Hi-Safe FH60 Full Body Harness Code HS-FH60, HS-FH60-LY (with lanyard), HS-FH60-CS (with con space) HS-FH60-CS-LY (with con space and lanyard)


• • • •


• • •

Picture Identifier/Features

1 Front free fall arrest attachment point2 Rear free fall arrest D-ring attachment point3 Breathable rear mesh panel keeps the harness in shape

Colour coded webbing for easier donning •Quick and easy to don and adjust •Fully adjustable, multi size fit •Australian Standards approved AS/NZS 1891.1:2007 •Optional permanently attached lanyard also available •Customised labelling available - conditions apply •Optional flame-proof/anti-static webbing •Optional confined space retrieval attachment points •


1 Front free fall arrest attachment points2 Rear free fall arrest D-ring attachment point3 Thread through, adjustable leg straps• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply• Optionalflame-proof/anti-staticwebbing


• • • • •

16 17

Har

ness

es


• • •


• • • •


• • • •


• • •

1

2

3

1

2

3

4

1

2

34

5

3

Hi-Safe FH18 Full Body Harness Code HS-FH18

Hi-Safe FH17-70 Full Body Harness Code HS-FH17-70

Hi-Safe FH17-40 Full Body Harness Code HS-FH17-40


1 Front free fall arrest loops with D-ring2 Rear free fall arrest D-ring attachment point3 Thread through, adjustable leg straps• Fullyadjustable,multisizefit• Easytodonoverthehead/jumperdesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply• Optionalflame-proof/anti-staticwebbing


1 Front free fall arrest loops 2 Rear free fall arrest D-ring attachment point3 Side pole strap attachment points4 Thread through, adjustable leg strap• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply• Optionalflame-proof/anti-staticwebbing


1 Front free fall arrest loops2 Rear free fall arrest D-ring

attachment point3 Rear dorsal free fall arrest extension strap

with wrist loop4 Confined space retrieval attachment points5 Thread through, adjustable leg straps• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply• Optionalflame-proof/anti-staticwebbing

1

2 3

4

4

5

6

7

Hi-Safe FH 6 Point Full Body Harness Code HS-FH 6 POINT


1 Front waist limited free fall arrest loops2 Front chest free fall arrest loops 3 Rear free fall arrest D-ring attachment point4 Rear dorsal free fall arrest extension strap

with wrist loop5 Side pole strap attachment points6 Confined space retrieval attachment points7 Thread through, adjustable leg straps• Fullyadjustable,multisizefit• Easytodonjacketstyledesign• AustralianStandardsapprovedAS/NZS1891.1:2007• Customisedlabellingavailable-conditionsapply• Optionalflame-proof/anti-staticwebbing

16 17

Harnesses

1

2

3

3

4

5 6

1

2

3

34

6

1

2

3

4

5

5

1

2

3

4

4

5

6

6 7

Ferno Arbor Agro Code VARB AGRO

Ferno Arbor Rite Code VARB RITE

Ferno Arbor SportCode VARB SPORT

Ferno Arbor Lite Code VARB LITE


1 Leg pad accepts a removable support bar to reduce fatigue and increase comfort when suspended

2 Wide lumbar pad with semi-rigid shank providing comfortable support

3 Upper D-ring pole strap attachments positioned for comfort and control

4 Rear haul loop ensures secondary lines are clear 5 Lower O-ring accepts replaceable front runner

with twin sliding D-rings6 Adjustable padded leg loops, waist and rear risers

• ManufacturedinourAS/NZ1891.1:2007accredited manufacturing facility


1 Wide lumbar pad with rigid shank providing comfortable support

2 Single wide leg pad accepts a removable support bar to reduce fatigue and increase comfort when suspended for longer stints

3 Rear haul loop ensures secondary lines are clear4 Upper D-ring pole strap attachments positioned for comfort

and control5 Additional D-rings are located at rear hip for fast attachment of

pole strap or tool attachment6 Lower O-ring with twin D-ring runner7 Adjustable padded leg loops, waist and rear risers

ensure the perfect fit• AustralianStandardsapprovedtoAS/NZS1891.1:2007


1 Single, ultra wide seat with individual leg retainers allow freedom of movement while maintaining large surface area comfort

2 Extra wide lumbar pad with 3D mesh for cooling and moisture wicking

3 Rear haul loop to ensure secondary lines are clear during climbing

4 Replaceable twin ring rope runner5 Balanced pole strap attachment points6 4 x metallic gear loops• ManufacturedinourAS/NZ1891.1accredited

manufacturing facility• Onesizefitsall


1 Wide lumbar pad for added comfort2 Single, ultra wide seat with individual leg retainers

allow freedom of movement while maintaining large surface area comfort

3 Twin pole strap attachment D-rings positioned for balance and control

4 Multiple metallic rear tool loops• ManufacturedinourAS/NZ1891.1accredited

manufacturing facility• Onesizefitsall

18 19

Har

ness

es

1

1

2

3

4

Ferno Centrepoint Sit Harness Code VHI CEN SIT (basic), VHI CEN SIT BS (with optional accessories)

Bosun’s Chair Code HS BC20

The Bosun’s Chair is ideal for situations where a worker will be suspended for extended periods of time, such as silo cleaning, panel painting and building inspections.

The Bosun’s Chair should be used in conjunction with a complete fall arrest or fall restraint system – reference AS/NZS 1891.1:2007

• Largeseatareawith back support

• Adjustablewaistand leg straps

• Adjustablefootrestto avoid leg cramps

• Externalstoragepouch and tool gear loops


1 Pole strap attachment points2 Wide, padded, waist and leg loops for added comfort when

hanging or working for long periods of time3 Gear loops around the waist for storing hardware and gear4 Fully adjustable rear leg risers to ensure best fit• Versatiledesignallowsuseforamultitudeofapplications• Userfriendlyandlightweightdesign• AustralianStandardsapprovedtoAS/NZS1891.1:2007• AvailableXS,S,M,L,XL.ConditionsapplyforXSandXLOptional Features• Batteryandselfrescuerattachmentstrap• Flame-proof/anti-staticwebbing

2

Ferno Flashpoint Sit Harness Code VHI FLASHP

The Ferno Flashpoint Sit Harness has been a favourite of State Emergency Services in Australia for many years. It is an extremely strong, lightweight and comfortable harness to hang in. This is due to its extra thigh/sit strap that spreads the load more evenly across the body, reducing the strain on the leg straps and waist belt.

The twin belay loops provide strength and orientates the descender in line with the body, instead of at right angles. The Ferno Flashpoint Sit Harness can also be combined with a chest harness to provide extra support and security. One size fits all.

Vertical Edge Harness VHS EDGE DB

The Edge Harness is a fully padded adjustable harness ideal for groups of varying sizes. This particular style of sit harness provides a very comfortable sitting position. The floating waistband, with three gear loops, makes it ideal for top-roping, abseiling or lead climbing. The Edge Harness comes standard with a double buckle system for added security. An industry standard among the Defence Forces the Edge Harness is a rugged, universal harness for climbing instruction and corporate clients where greater comfort and padding is required.

FeaturesSize: One size fits all •Weight: 760 g •

18 19

Harnesses

Vertical Challenge Harness VHS CHALLENGE

The Vertical Challenge Harness is specially designed for climbing artificial walls and for via ferrata. It is fitted with one simple tie-in point which is placed above the belt, effectively raising the centre of gravity to avoid inversion. It has adjustable leg loops with stylish Austri Alpin alloy double buckles and optional gear loops.

FeaturesSize: Standard (one size fits most – XS and XL •available on request) Weight: 460 g •

A full body harness designed specifically to address recent industry regulation changes and requirements involved with challenge rope courses, artificial climbing / abseiling walls, giant swings and flying fox (zipline) applications. It has multiple attachment points, D-rings for separate attachment or for use together. Twin soft tie in seat attachment points.

Colour-coded body sections for simplistic fitting, minimise risk and provide instructors with a higher level of certainty especially with large groups.

Vertical Redpoint Harness VHS RED

The Vertical Redpoint Harness is our original group use harness and continues to have a significant following due to its lightweight. It has an optional padded band available for comfort. An ideal harness for trekking or mountaineering as well as abseiling.

FeaturesSize: One size fits all •Weight: 390 g •

Vertical Gym Harness VHS GYM

The Vertical Gym Harness is a fully adjustable lightweight harness designed to be easy to don, wear and use. It is especially suitable for gyms, group use and for people starting out in climbing because of its simple and secure buckle system. The waist belt and leg loop buckles are permanently secured so that the webbing cannot be unthreaded. Simply pull on the end of the straps to adjust. This makes the Vertical Gym Harness very safe and provides instructors with a higher level of certainty, especially with large groups or inexperienced people who may not be aware of the dangers of failing to double back normal harness buckles. A very popular, simple and hard wearing harness.

FeaturesOptional padded band available for comfort •Size: One size fits all •Weight: 490 g •

Vertical Bungee Trampoline Harness VHS TRAMP

The Vertical Bungee Trampoline Harness is designed not only to be safe and comfortable for the user but also to provide the instructor with a quick fit and quick release, allowing a faster turnover of participants.

Features

Quick-connect buckles •Padded waist band •Padded leg straps •Quick adjustment •for a one size fits all design

Vertical Hightop Flying Fox/Swing Harness VHS HIGHTOP

20 21

Har

ness

es

Ferno Rappel Belt Code VAI RAPPEL

The Ferno Rappel Belt is designed for situations where an instant evacuation or extrication is the only resort. It is manufactured from quality 44 mm webbing and plated steel components.

Secure sliding bar buckle for ultra fast donning •Steel D-ring attachment point •Velcro loop keeps D-ring stowed until required •Velcro keeps the web belt end neatly secured, preventing any possibility of entanglement or slippage •Rated to 6 kN - restraint fall •

Key Features

Vertical Rescue Triangular Harness Code VRES TRI HARN

The Vertical Rescue Triangular Harness is a simple yet robust patient lifting sling designed for all forms of rapid vertical extrications. The simple design allows the harness to be applied to the patient easily and quickly compared to other full body rescue harnesses. The Vertical Rescue Triangular Harness secures the patient during a lift. This harness is not suitable for patients with suspected spinal injuries.

Ferno Patient Lifting Sling Code VRES PAT LIFT +

The Ferno Patient Lifting Sling is ideal for retrieving persons trapped in locations where time and rescue is of the essence. This sling is simple to apply and fully adjustable in confined and difficult situations. The underarm strop with securing buckle and adjustable leg loops ensure a secure hold.

The Grommit full body harness is designed for use with small children for either climbing or abseiling. The high attachment points make sure the child cannot invert. Weight 390 g

Vertical Chest Harness VHS CHEST

The Vertical Chest Harness is only to be used in conjunction with a sit harness. It provides additional support for people with a high centre of gravity or for fixing ascending systems securely to the body. The two soft eyes on the Vertical Chest Harness are designed to connect to the harness belay loop via a hardware connector. Size: One size fits all. Weight: 340 g.

Vertical Chest Harness Extra VHS CHEST EX

The Vertical Chest Harness Extra is only to be used in conjunction with a sit harness. It provides additional support for people with a high centre of gravity or for fixing ascending systems securely to the body. The Vertical Chest Harness Extra is designed to thread through the harness belay loop. Size: One size fits all. Weight: 390 g.

Vertical Grommit Harness VHS GROM

20 21

Harnesses

Standard Code Elasticised Code Energy Absorber End Tail End

HS-LYS100 HS-LYS100EL Screw Gate Karabiner Screw Gate Karabiner

HS-LYS110 HS-LYS110EL Screw Gate Karabiner Double Action Hook

HS-LYS120 HS-LYS120EL Screw Gate Karabiner Scaffold Hook

HS-LYS200 HS-LYS200EL Double Action Hook Double Action Hook

HS-LYS210 HS-LYS210EL Double Action Hook Screw Gate Karabiner

HS-LYS220 HS-LYS220EL Double Action Hook Scaffold Hook

HS-LYS230 HS-LYS230EL Double Action Hook Small Triplock Karabiner

HS-LYS300 HS-LYS300EL Small Triplock Karabiner Small Triplock Karabiner

HS-LYS310 HS-LYS310EL Small Triplock Karabiner Screw Gate Karabiner

HS-LYS320 HS-LYS320EL Small Triplock Karabiner Double Action Hook

HS-LYS330 HS-LYS330EL Small Triplock Karabiner Scaffold Hook

Harness Assist retrofit or made to order as integral part of harness or lanyard


HS-LYA100 HS-LYA100EL Screw Gate Karabiner Screw Gate Karabiner

HS-LYA110 HS-LYA110EL Screw Gate Karabiner Double Action Hook

HS-LYA120 HS-LYA120EL Screw Gate Karabiner Scaffold Hook

HS-LYA200 HS-LYA200EL Double Action Hook Double Action Hook

HS-LYA210 HS-LYA210EL Double Action Hook Screw Gate Karabiner

HS-LYA220 HS-LYA220EL Double Action Hook Scaffold Hook

HS-LYA230 HS-LYA230EL Double Action Hook Small Triplock Karabiner

HS-LYA300 HS-LYA300EL Small Triplock Karabiner Small Triplock Karabiner

HS-LYA310 HS-LYA310EL Small Triplock Karabiner Screw Gate Karabiner

HS-LYA320 HS-LYA320EL Small Triplock Karabiner Double Action Hook

HS-LYA330 HS-LYA330EL Small Triplock Karabiner Scaffold Hook


Other hardware options or combinations can be made to order on request.


Harness Assist

Designed to minimise the •effects of suspension traumaAvailable in three options, •see page 14 for full detailsRetrofit immediately in the •field or as integral part of new harness or lanyard Adjustable for varying •user heightsLightweight and unobtrusive •

Hardware Options

Steel Screw gate Karabiner

Steel Small Triplock

Karabiner

Alloy Triplock

Karabiner

Alloy Double Action Hook

Steel Large Triplock

Karabiner

Steel Double Action Hook

Steel Scaffold Hook

Alloy Scaffold Hook

Alloy Screw gate Karabiner

HS-LYS100EL steel

HS-LYA100EL alloy

HS-LYS100 steel

HS-LYA100 alloy

Some lanyard options shown may not be available for immediate delivery but will be made upon order. Refer to Ferno or an authorised Ferno distributor for a full list of standard lanyards available for immediate delivery. Other hardware options or combinations can be made upon request from the hardware selection shown. Minimum order quantities may apply. All components must be checked for compatibility.

Lanyard Selection with Steel Hardware

Lanyard Selection with Aluminium (Alloy) Hardware

Single Standard and Elasticised Absorber Lanyards 2 m (Also available in 1.6 m length)

22 23

Hei

ght S

afet

y So

ftgo

ods

and

Kits


HS-LYSTT100 HS-LYSTT100EL Screw Gate Karabiner Screw Gate Karabiners

HS-LYSTT110 HS-LYSTT110EL Screw Gate Karabiner Double Action Hooks

HS-LYSTT120 HS-LYSTT120EL Screw Gate Karabiner Scaffold Hooks

HS-LYSTT200 HS-LYSTT200EL Double Action Hook Double Action Hooks

HS-LYSTT210 HS-LYSTT210EL Double Action Hook Screw Gate Karabiners

HS-LYSTT220 HS-LYSTT220EL Double Action Hook Scaffold Hooks

HS-LYSTT230 HS-LYSTT230EL Double Action Hook Small Triplock Karabiner

HS-LYSTT300 HS-LYSTT300EL Small Triplock Karabiner Small Triplock Karabiner

HS-LYSTT310 HS-LYSTT310EL Small Triplock Karabiner Screw Gate Karabiner

HS-LYSTT320 HS-LYSTT320EL Small Triplock Karabiner Double Action Hook

HS-LYSTT330 HS-LYSTT330EL Small Triplock Karabiner Scaffold Hook



HS-LYATT100 HS-LYATT100EL Screw Gate Karabiner Screw Gate Karabiners

HS-LYATT110 HS-LYATT110EL Screw Gate Karabiner Double Action Hooks

HS-LYATT120 HS-LYATT120EL Screw Gate Karabiner Scaffold Hooks

HS-LYATT200 HS-LYATT200EL Double Action Hook Double Action Hooks

HS-LYATT210 HS-LYATT210EL Double Action Hook Screw Gate Karabiners

HS-LYATT220 HS-LYATT220EL Double Action Hook Scaffold Hooks

HS-LYATT230 HS-LYATT230EL Double Action Hook Small Triplock Karabiner

HS-LYATT300 HS-LYATT300EL Small Triplock Karabiner Small Triplock Karabiner

HS-LYATT310 HS-LYATT310EL Small Triplock Karabiner Screw Gate Karabiner

HS-LYATT320 HS-LYATT320EL Small Triplock Karabiner Double Action Hook

HS-LYATT330 HS-LYATT330EL Small Triplock Karabiner Scaffold Hook


Twin Tail Standard and Elasticised Absorber Lanyards 1.6 m (Also available in 2 m length)

Twin Tail Absorber Lanyards allow users controlled movement without disconnecting the lanyard. Some lanyard options shown may not be available for immediate delivery but will be made upon order. Refer to Ferno or an authorised Ferno distributor for a full list of standard lanyards available for immediate delivery. Other hardware options or combinations can be made upon request from the hardware selection shown. Minimum order quantities may apply. All components must be checked for compatibility.

HS-LYSTT100 steelHS-LYATT100 alloy HS-LYSTT100EL steel

HS-LYATT100EL alloy

Hardware Options

Steel Screw gate Karabiner

Steel Small Triplock

Karabiner

Alloy Triplock

Karabiner

Alloy Double Action Hook

Steel Large Triplock

Karabiner

Steel Double Action Hook

Steel Scaffold Hook

Alloy Scaffold Hook

Alloy Screw gate Karabiner



Harness Assist

Designed to minimise the •effects of suspension traumaAvailable in three options, •see page 14 for full detailsRetrofit immediately in the •field or as integral part of new harness or lanyard Adjustable for varying •user heightsLightweight and unobtrusive •

Lanyard Selection with Steel Hardware

Lanyard Selection with Aluminium (Alloy) Hardware

22 23

Height Safety Softgoods and Kits

Adjustable Multi-Purpose Lanyards Code VAI ADJ EA FAL (1), VAI EA ARL1A (2), VAI EA ARL2A (3)

Harness Assist

Code Description

VAI ADJ EA FAL Single assembly, supplied with alloy ISC rope grab (EN353 rated)

VAI EA ARL1A Single, economical, all steel rope grab and hardware

VAI EA ARL2A Twin tail economical, all steel rope grab and hardware

Energy Absorber (only)

Code Hardware Selection Length

HS-SA10 Screw Gate Karabiner/Screw Gate Karabiner 60 cm

HS-SA20 D-ring/Screw Gate Karabiner 60 cm

HS-SA30 Double Action Hook/Screw Gate Karabiner 60 cm

Simple to inspect, maintain and use, Ferno’s range of adjustable multi-purpose lanyards are ideal for use in a variety of situations including elevated work platforms and all general work at height scenarios.

The durable rope construction in conjunction with a rope grab allows the user to adjust the lanyard length from 60 cm to 200 cm ensuring the perfect length lanyard for each working scenario. Australian Standards approved to AS/NZS 1891.1:2007.

The Harness Assist is specifically designed to minimise the effects of suspension trauma. In the event of a fall an adjustable twin foot loop is deployed allowing the user to stand and transfer their weight directly to the anchor point greatly relieving pressure from the harness – one of the major contributing factors to suspension trauma symptoms. The Harness Assist is available in varying options allowing versatility for various users and scenarios. All options are lightweight at approximately 150 g.

Option 1 Harness Upgrade Code “HS-HA”

This option can be retrofitted to any harness and is manually deployed after a fall. It attaches to the rear free fall arrest attachment point of any existing harness and can be purchased separately and retrofitted in the field. It is neatly packaged and concealed within a small, unobtrusive pack which is fitted to the harness close to the user’s chest ready for quick deployment.

Option 2 Harness Integrated Code “HS-FHHA”

This option is integrated into the harness during production and is generally made to order. It is manually deployed ensuring immediate access to the adjustable foot loops. It is supplied in a neat, unobtrusive pack which is fitted to the harness close to the user’s chest ready for quick deployment. (Only available on Hi-Safe Harness range page 4, 5 & 6).

Option 3 Lanyard Integrated Code “HS-LYHA”

A great addition to any lanyard with the secure knowledge that an automatic deployment occurs in the event of a fall. This version of the harness assist is integrated into the lanyard and is generally made to order with many of the lanyard options shown. It is very slim line, light weight and conveniently packaged within the energy absorbing pouch of the lanyard. (Not available on Adjustable Multi-Purpose Lanyards).

VAI ADJ EA FAL

VAI EA ARL1A

VAI EA ARL2A

Option 2

Option 3

Option 1

HS-SA10

HS-SA20

HS-SA30

In the event of a fall, energy absorbers deploy an additional length of webbing that is designed to absorb the force or shock load experienced.

24 25

Hei

ght S

afet

y So

ftgo

ods

and

Kits

Wire Core Pole Strap Code HS-WCPS/3 (3 m) HS-WCPS/4 (4 m)

Wire Absorber LanyardCode HS-LY80P (karabiner), HS-LY80P-DA (double action hook)

Adjustable Rope Lanyard 2 m Code HS-LY200CD

Hi-Safe Non Adjustable Lanyards

Code Style Hardware Selection Length

HS-LY600R Rope Lanyard Screw Gate Karabiner/Screw Gate Karabiner 60 cm

HS-LY600W Web Lanyard Double Action Hook/Screw Gate Karabiner 60 cm

HS-LY200R Rope Lanyard Screw Gate Karabiner/Screw Gate Karabiner 2 m

HS-LY200W Web Lanyard Double Action Hook/Screw Gate Karabiner 2 m

A rope positioning system with 2 m of adjustment by means of a stainless steel double jawed rope adjuster. Supplied complete with an attached steel screw gate karabiner to secure to an anchor point of harness.

To be used in situations of restraint where there is no risk of a free fall. Refer to AS NZS 1891.1:2007 or a Registered Training Organisation.

Made of cut resistant steel wire with a double braid cover and supplied complete with a stainless steel rope adjuster, steel screw gate karabiner and steel double action hook. These lanyards are ideal for use when welding or using cutting tools. Available in 3 m or 4 m lengths.

A single plastic coated, galvanised wire rope with an energy absorber. The wire rope is a suitable alternative to webbing when welding or working with cutting tools. Available with screw gate karabiner or double action hook at the energy absorber end.

HS-LY600W

HS-LY600R

HS-LY200R

Hi-Safe Non-Adjustable Lanyards are available in rope or webbing and are used as an extension or to secure workers in restraint only. Energy Absorbers are not available on these products.

Hi-Safe Non-Adjustable Lanyards are available in 2 m lengths in either rope or webbing. To be used in situations of restraint only where there is no risk of a free fall. Energy Absorbers are not available on these products. An understanding of working in restraint is essential for the safe use of these products. Refer to AS NZS 1891.1: 2007 or a Registered Training Organisation.

Ferno Pole Strap Code VAI POLE EN2 NZ

AS/NZS 1891.1:2007 approved pole strap is available in various lengths from 1.9 m to 5 m depending on the user’s individual circumstances. It is supplied standard with two double action alloy hooks. Also available with steel or alloy karabiners (screw gate or triplock). Supplied standard with either a durable leather sleeve or a webbing protective sheath. An optional D-ring can be supplied as an attachment point for hanging tools and gear up to 50 kg.

• AS/NZS1891.1:2007standardsapproved• Availableinvariouslengthsfrom1.9mto5m• Availableinanarrayofhardwareconnectionpoints• Buckleadjustmentisoffsetfromattachmentpointforeasyadjustment• Suppliedstandardwitheitheradurableleathersleeveorawebbingprotectivesheath

Optional D-ring

24 25


Designed by industry professionals and tested in the field to meet the day to day requirements of roof workers. All components have been carefully selected for durability and quality ensuring longevity of service.

Specifically constructed for use on all metal roofs. All components have been selected for durability and quality ensuring longevity of service.

The Tower Workers Kit contains everything necessary for working on top of towers, electrical poles and pylons.

Roofers KitCode HS-DL60-SP (FH60 with spliced rope), HS-DL60-NT (FH60 with kernmantle rope), HS-DL17-SP (FH17 with spliced rope), HS-DL17-NT (FH17 with kernmantle rope)

Metal Workers Roof KitCode HS-DLMR

Kit Contents Qty

Hi-Safe FH17 Full Body Harnessor Hi-Safe FH60 Full Body Harness

1

Rope adjuster with karabiner 1

15 m of 11 mm rope with double action hook

1

Personal energy absorber 1

2 m tie-off adapter 1

All purpose grab bag 1

Kit Contents QtyHi-Safe FH17 Full Body Harness 1


15mropewithdoubleactionhook 1


2 m tie-off adapter 1

Restraint Bracket LS20 1

Restraint Brackets LS16 2

Steel screw gate karabiner 2


Tower Workers KitCode VKIT TOWER

Kit Contents QtyFerno Tower 2 Full Body Harness 1

Sling-round25mmx1500mm 1

Sling-round25mmx1200mm 1

Pole strap 4 m 1

Single elasticised absorber lanyard 1.6 m 1

Steel triplock karabiner 2


26 27

Hei

ght S

afet

y So

ftgo

ods

and

Kits

The Train Kit contains all the components required to protect workers accessing tops of carriages from the track, platform or ladder.

The container kit protects workers accessing and descending from the top of shipping containers. In addition this kit can be fitted to allow freedom of movement on top of the container while preventing the chance of a fall.

The Pole Top Rescue Kit is supplied complete with all equipment necessary to complete rescues during electrical pole work. Conforms to many electrical authorities requirements. Note: electrical gauntlets not provided.

Train KitCode HS-TK-1





Tie-off sling adapter 2

Adjustable tether strap 7 m 1


Container KitCode HS-CK-1





Specific tie-off adapter 4

Adjustable tether strap 7 m 1

CD Instruction manual 1


Pole Top Rescue KitCode VKIT POLE AS

Kit Contents Qty

Weather proof fiberglass container with instructions

1

33 m blue rope with hard eye end 1Alloy double action hooks 2

Pole Belt 1

Pole strap with D-ring 1

Tool pouch 1

Cable cutters 1

Knife, blunt nose 1

26 27


The EPV Exodus Kit is a self-contained escape kit that is ideal for workers on overhead cranes, elevated platforms and rescue teams. Attached to a permanent fixture the unit is deployed in the event of an emergency and operators descend using a simple pre-rigged control descent device. Mounting plate kit available separately.

EPV Exodus Kit Code HS-RE20/16 (16 m rope), HS-RE20/25 (25 m rope)

This system is designed for short work durations where a larger degree of side movement is required and this movement cannot be covered by the use of a lanyard or drop line. Ideal for use when installing balcony handrails or running cables along roof edges.

Ideal when semi regular access is required but does not warrant the expense of a permanent walkway. Most components are stainless steel and each system contains a patented fall guard static line energy absorber to protect the end structure and minimise shock load. All cables are a minimum MBF 44 kN. Available in 10 mm and 12 mm.

*Order wire in length required for application**Mid bracket required every 10 m if static line is 10 m or greater in length

The Tower Rescue Kit contains the essential equipment required for the retrieval and rescue of personnel on tower structures.

Webbing Static Line Kit Code HS-HLL2

Stainless Steel Wire Static Line Kit Code HS-HLL

Kit Contents Qty18 m web static line with ratchet 1

2 tonne round sling 2 m 2

2 tonne safety bow shackles 2


Kit Contents QtyStainless steel wire (swaged one end) as required*

Fall guard static line shock absorber 1

2 tonne safety bow shackles 4

Heavy-duty anchor end bracket 2

Mid bracket where applicable**

Galvanised steel thimble 1

Double base clamp 3

Turn buckle 1

Metallic ID compliance plate 1

Kit Contents Qty11 mm rope as required*

2 tonne shackle 1

Exodus escape device 1

Steel screw gate karabiner 1

Fibreglass weather resistant case 1

Ferno Tower Rescue Kit Code VKIT-FTRK

Kit Contents QtyStorage backpack yellow 165 m rope with sewn eye & triplock karabiner 1FDU100 Rescue Descender with triplock karabiner 150 mm x 1200 mm anchor sling 125 mm x 1200 mm round sling 1Rescue knife with extender and 2 alloy triplock karabiner 1Mechanical advantage retrieval system 1Cervical collar (optional) 1

28 29

Hei

ght S

afet

y So

ftgo

ods

and

Kits

Ferno Slings Codes VSL R32kN (25 mm round), VSL S80kN (50 mm heavy-duty flat snake) and VSL S30kN (50 mm flat snake

Girth Hitch SlingCode Vsl G30kN

Tie-Off AdaptersCode HS-AC1000, HS-AC2000

Hi-Safe Tie-Off Sling With D-ringsCode HS-AC10 (1 m), HS-AC20 (2 m)

Every Ferno Sling is made from high grade, abrasion resistant webbing and is available in a variety of colours and lengths. Slings are made for a versatile and handy adjunct for forming temporary anchor points. Manufactured in accordance to AS/NZS 1891.

25 mm Round Sling

50 mm Flat Snake Sling

50 mm Heavy-duty Flat Snake Sling

The Girth Hitch Sling differs significantly in design and performance from other adjustable anchor straps, allowing it to handle a higher load before slipping. The D-ring on one side is larger than the other, so the other end can pass through, allowing the straps to be rigged in a girth hitch. Available in lengths from 30 cm to 2.5 m

Available in one and 2 tonne holding capacity. Manufactured from very low stretch material with a soft finish to protect painted surfaces.

Made from high grade, abrasion resistant webbing. Available in safety orange with two convenient D-rings permanently attached. A universal sling tie-off and for forming temporary anchor points.

AC1000 1 mAC2000 2 m

Vertical Dyneema Webolette & Slings VAS WEBO, VSL R22kN

Webolettes are used to help set up simple and quick belays on multi pitch or single pitch routes. While Dyneema is lighter, care should be taken as it is more prone to wear in comparison to nylon slings. Available in varying lengths with a sewn eyelet at each end.

Webolette rated to 15 kN •Slings rated to 22 kN •

28 29


Ferno Rescue Personal Lanyard (PAL)Code Vas DAISY ADJ

Ferno Industrial Daisy ChainCode Vai DAISY H/D BLK

Spike Pads Code VARB TSP (T-Spike), Code VARB OSP (Oval Spike)

The Ferno Rescue Personal Lanyard allows a rescuer to quickly connect to a victim and then adjust the strap to the desired length. It works well for positioning the victim for a lowering or rappel-based pick off or for an assisted rappel. There is an added loop to the end for a more positive grip when pulling to adjust. Depending on how the buckle is loaded, it will begin to slip between 15 kN to 20 kN. Tying off the buckle will increase strength.

The Ferno Industrial Daisy Chain is ideal for positioning the casualty during work operations and is a must for all Rope Access and Rescue Technicians. A total length of 1.1 m with an end to end rating between 15 kN to 20 kN (load angle dependent). Each unit comes with 10 x 60 mm attachment loops and is made from durable 25 mm flat polyester web. Each loop rated to 5 kN.

Tough, pliable black leather with a soft padded inner felt. Large 40 mm thread holes provide easy strap point adjustability for a comfortable fit.

Vertical Daisy Chain VAS DAISY

This Daisy Chain features 22 mm nylon tube with 12 loops. Rated to 15 kN overall and each loop rated to 5 kN •Weight 113 g •Length: 1200 mm •

Vertical Prusik Stirrups - Adjustable VAS PRUSS ADJ A great aid for rope climbing, the adjustable Prusik Stirrups minimise the effort expended when climbing or positioning while on rope.

Etrier and Aider Four and Five Step CodeVasETRIER4&5andVasAIDER4&5

The Etrier and Aider Four and Five Step are ideal for rescue, rope access and recreational aid climbing. The 25 mm flat polyester webbing and dense vinyl stiffening ribs remain rigid for years, ensuring ease of foot placement and superior abrasion resistance.

AiderEtrier

30 31

Hei

ght S

afet

y So

ftgo

ods

and

Kits

Throw BagsCodeVARBTB250,250D(Dipped),400and400D(Dipped)

These hard wearing, rip resistant throw bags are filled with either 250 g or 400 g of lead shot. Each Throw Bag includes a 2.5 cm steel ring for attachment to throwing line. Also available with white heavy-duty rubber dip for increased wear resistance and longer life as well as offering greater visibility (colour may very from shown).

Tool Strops

Ferno offer a range of standard tool strops (also known as tool lanyards) as well as elasticised and tearaway versions. The tearaway strop is constructed with a tearaway safety strap that is designed to absorb the force or shock load of a chainsaw or heavy tool fall. The safety strap will begin to tear when approximately 30 kg or greater of force is applied. It is also available in an elasticised version that reduces the length of the strop when not under load and to minimise entanglement in the work area.

Standard and Elasticised

(1) VARB TS 900 - Tool Strop Basic 900 mm Blue •(2) VARB TS 1200 - Tool Strop Basic 1200 mm Red •(3) VARB TS 900 EL - Tool Strop Basic Elastic 900 mm Blue •(4) VARB TS 2LL - Tool Strop 2 Loop 1200 mm Red •(5) VARB TS MINI - Tool Strop Basic Mini Blue •

(1) VARB TS T/A 1200 - Tool Strop Tearaway 1200 mm Red •(2) VARB TS T/A 900 - Tool Strop Tearaway 900 mm Blue •(3) VARB TS T/A EL - Tool Strop Tearaway Elastic 1200 mm Red •

Tearaway: Standard and Elasticised

(1)

(2)(3)

(4)(5)

(2)

(3)

(1)

Tool Wrist LoopsCodeHS-WL10,HS-WL15

The Tool Wrist Loops reduce the risk of dropped tools and equipment. They are lightweight, flexible and comfortable to wear and have been developed to secure hand tools and other equipment in situations where work must be carried out over other workers or public spaces.

• Cordloop• Adjustablewristband•Washable

•Metalsnapclip• Swivelhook• Adjustablewristband

HS-WL10 HS-WL15

Rope Savers

Ferno Rope Savers are available in a variety of sizes and include two different sized steel rings connected to heavy-duty, industrial rated polyester webbing. Ferno Rope Savers minimise damage to the tree and provide consistent friction on the climbing rope.

(1)

(2)

(3)

(4)(5)

(1) VARB RS1500 - Rope Saver 1500 mm Red •(2) VARB RS1800 - Rope Saver 1800 mm Fluoro Yellow •(3) VARB RS900 - Rope Saver 900 mm Red •(4) VARB RS1200 - Rope Saver 1200 mm Blue •(5) VARB RS600 - Rope Saver 600 mm Fluoro Yellow •

30 31


Size (Dia) Weight/100 m Break Strength SWL Reel Length

12 mm 10.4 kg 4570 kg 760 kg 100 m

16 mm 21 kg 5530 kg 920 kg 100 m


11 mm 9 kg 3475 kg 347 kg 200 m

13 mm 11 kg 4750 kg 475 kg 200 m


6 mm 3 kg 1100 kg 110 kg 100 m

9 mm 6 kg 2250 kg 225 kg 200 m

11 mm 9 kg 3475 kg 347 kg 200 m

13 mm 11 kg 4750 kg 475 kg 200 m

16 mm 16.5 kg 6900 kg 690 kg 100 m

% of Break Strength 10% 20% 30%

Elastic Elongation 12 mm 1.8% 2.6% 3.3%

Elastic Elongation 16 mm 1.8% 2.6% 3.3%

Working Load 80 kg 375 kg 3740 kg

Elastic Elongation 1.4% 6.1% 25%

Response® XT Access Line

Response® Static Line Access Line

Rhino Rigging/Lowering Line

Three Strand Polyester Rope Rigging/Lowering Line

Size (Dia) Reel Length Standard Breakforce Base Colour Marker Yarn No. Strands

12 mm 250 m 2280 kg Natural White Blue 3

16 mm 250 m 4100 kg Natural White Blue 3

Response XT has been designed with your ultimate safety in mind, certified to AS/NZS 4142.3, ANSI Z-133 and EN 1981 standards. Donaghys Response XT is the premium safety and rescue line and allows quick access for any emergency.

Low stretch, high strength •Heat Set •Quick access •Excellent knot holding •

Response Static Line is characterised as supple for handling, coiling and providing superior feel and control when used with certified hardware in any abseil, belay or static descent application. AS/NZS 4142.3 and EN1891 compliant. Available in various colour options.

Rhino is a 100% polyester double braid. Designed for high strength with low stretch, Rhino offers the ultimate in rigging or lowering lines.

Low stretch •Easy to splice •Excellent handling and abrasion resistance •UV stable •Designed to run easily through rigging hardware •

A spliceable three strand, high tenacity, abrasion resistant polyester. This rope is suitable for a multitude of applications including roofing restraint, general lift and tie down purposes.

AS4142:3 1993 compliant •

Narrowtex Static Kernmantle Rope is a fully imported, economical rope constructed with a braided polyester outer surrounding a nylon kernmantle core.

Available in 11.5 mm and 13 mm diameter

Meets AS 4142.3 and EN 1891:1998

Arresta Static Kernmantle Rope

32 33

Rope

and

Rop

e Ca

re P

rodu

cts

SPARKClimbing Rope


12 mm 8.3 kg 3523 kg 352 kg 100 m

Size (Dia) Weight per 100m Break Strength

8 mm 4 kg 7300 kg

10 mm 5 kg 10900 kg

12 mm 9 kg 17800 kg

14 mm 12 kg 21700 kg

16 mm 14 kg 26100 kg


Elastic Elongation 2.5% 3.6% 5.2%


Elastic Elongation 2.5% 3.4% 4.5%

NRGClimbing Rope

Ocean12 HSRigging/Crane Line

Armour-PrusPrusik Line

Product Size (Dia) Break Strength Reel Length

Standard-Prus 6 mm 1100 kg 100 m

Standard-Prus 8 mm 1900 kg 100 m

Spectra-Speed 6 mm 1570 kg 100 m



Armour-Prus 8 mm 2800 kg 25 m

Armour-Prus 10 mm 4300 kg 25 m

Standard-PrusPrusik Line


12 mm 9 kg 3204 kg 320 kg 200 m

Constructed using a tough 16 strand braided polyester cover with a kernmantle core then stabilised to create an ideal hard wearing cost effective climbing line.

NRG is a high performance 12 mm, 24 strand climbing line designed for use in sports climbing and professional Arborist applications. NRG is lightweight with excellent knot holding abilities and allows easy access into trees with great foot locking capabilities.

Knobbly cover construction for easy handling •Excellent bend ratio •Lightweight •Low stretch for excellent foot locking •Kernmantle core construction •Works well with hardware •Meets ANSI Z-133 standards •

A 12 strand construction utilising Dyneema® SK75 fibres that are specially treated and heat set to produce one of the highest strength-to-weight ratio ropes in the world. The Ocean12 HS has a very low stretch with high UV resistance and an abrasion resistant coating. It is suitable for a wire/chain replacement. Protective jackets available on request.

At long last, a prusik line that will last. A unique cover blend of Technora and polyester acts like armour over a core of lightweight Spectra 900. Donaghys Spectra® core incorporates a world first safety feature of twin Kevlar strands preventing the core from being cut or melted completely in the unlikely event of a cover failure.

Very low stretch and easy to splice •Technora is rated 234ºC higher than standard polyester •

A double braided high tenacity nylon Prusik or accessory line which can be used in all general applications.

Easy handling and knot holding •Suitable for general applications •

Approved for use as Prusik material climbing hitches. Spectra-Speed uses a high tenacity polyester braided cover over a braided Spectra® 900 core.

Very lightweight with no stretch •Easy to splice •Meets ITCC climbing competition rules •Certified to Australian Standard AS/NZS 4142.3 •

Available by the metre

Fully spliceable cover dependent construction •Low stretch and highly visible •Lightweight •Wears well with high abrasion resistant low snag •polyester coverKernmantle core construction •Meets ANSI Z-133 standards •

Spectra-SpeedPrusik Line

32 33

Rope and Rope Care Products

Rope Finishing

Ferno can manufacture rope components to individual specifications including splicing of both standard and double braid synthetic rope along with quality sewing of kernmantle rope with an array of plastic, stainless steel and galvanised steel thimble fittings to ensure a perfect custom solution.

Rope Protectors

Code Length End Attachments (steel)

HS-SL20K 20 m Screw Gate Karabiner

HS-SL30 30 m Double Action Hook






Code Length End Attachments (steel)








Rope Safety Lines

Ferno provide various styles of rope protectors that prevent rope damage on sharp, abrasive or dirty edges and help prolong the life of your rope and slings. They are available in heavy-duty, flat or in a lighter duty wraparound. Ferno’s Rope Protectors provide ideal protection for your ropes and slings.

(1)

(3)

(2)

(1) VAS ROP PROT - Light duty •(2) VAI ROP PROT IND FLAT - Flat •(3) VAI ROP PROT IND WRAP - Wraparound •

Hi-Safe safety lines are made from 11 mm kernmantle, high tenacity, abrasion resistant rope with a breaking force in excess of 25 kN.

Note other lengths and end fittings on request.

Ferno Rope and Harness WashCodeVASWASH(500mlbottle)andVASWASH20(20Lcontainer)

A highly concentrated, blue liquid that is recommended for use with industrial harnesses, access, rigging and lowering ropes. Ferno Rope and Harness Wash is environmentally friendly, bio-degradable and does not contain any phosphates, bleaches or fragrances. It is low foaming, free rinsing with excellent soil removal properties. Available in a 500 mL bottle or 20 L bulk container.

Rope Specifications

34 35

Rope

and

Rop

e Ca

re P

rodu

cts

Ferno Rope BagsCode VBS HIVIS (Heavy-Duty), VBS ROP BAG (Standard)

Small Gear BagCode VARB GB

Multi PouchCode VRES MULTI POUCH

Expedition II Duffel BagCode VBS EXP 2 HD

All Purpose Grab BagCode VBI CARRY

The Ferno Heavy-duty Rope Bag keeps your rope conveniently stowed, ready for transportation and quick deployment. It comes with a carry handle, backpack straps, pull tight throat closure and is made from 1000 denier vinyl. Available in 50 m, 100 m, 150 m and 200 m sizes.

The Standard Rope Bag is available in 50 m, 100 m, 150 m and 200 m sizes and is made from 1000 denier cordura. This version comes complete with a single shoulder strap only.

A universal, heavy-duty Cordura bag with robust handle and draw-string top. Self supporting but still capable of collapsing for storage.

Dimensions: L 150 mm, W 150 mm, D 150 mm

The Multi Pouch is an ideal bag for the convenient storage of all rope and rescue gear. The clear faced pouches provide an uninterrupted view of all equipment, assisting in quick identification and deployment. The Multi Pouch is made from tough 1000 denier nylon. Each Multi Pouch features integral carry handle and backpack straps. The Multi Pouch has been a favourite with emergency services personnel for many years.

The Expedition II Duffle Bag is a sizeable bag with a 75 L capacity that is made tough to carry rescue, industrial or climbing gear. This bag is made from 1680 denier nylon with integral shoulder and carry straps and is a favourite from our outdoor range.

This multi-purpose bag is ideal and large enough for storing your harness and all related gear to make up your own kit. A handy daisy chain is located inside the zipper opening for convenient storage of karabiners and other gear. Available in a variety of colours: maroon, black, red, yellow and blue.

Ferno Heavy-duty Rope Bag

Ferno Standard Rope Bag

34 35

Bags and Climbing A

ccessories

Vertical Chalk Bags CH BAG

Excellent for bouldering and long cragging sessions. This professionally finished bag will nest heaps of chalk. Exquisite fleece lining with a simple draw string closure and mandatory attachment loop. Available in a variety of colours.

Ponderosa Bagpack Code VBS POND

A great little bagpack that allows you to carry and sort your essential climbing gear. Included as an integral part of the Ponderosa is a large ground sheet to keep your rope and gear clean and dry. A pull tight draw string holds your gear together along with an additional web strap. It also has two backpack straps so you can be hands free to carry other gear.

Gear Sling – Adjustable VAS GEAR SL ADJ

Chalk Bag Belt VAS CH BELT

This super light, nylon web belt features a light-weight adjustable snap buckle, a perfect addition to your chalk bags.

Vertical Gear Compression Cap VAS COMP CAP

Vertical Floor Belay Station Sling VAS BELAY SL

Reinforced ends with a protective layer for long gym life.Adjustable to 1200 mm. Rated to 16kN.

Vertical Neat Seat VAS NEAT S

Climbing rock is sick but sitting on it for hours is pain. The Neat Seat is a padded, lightweight seat that is a fantastic adjunct to your climbing gear. Made from durable nylon with adjustable stays. Folds flat and inconspicuous for inclusion on any trip.

Slip the compression cap over your sleeping bags or other soft gear and tighten the straps. This can reduce your gear size by up to 40% allowing space for other equipment. Diameter 230 mm. Weight 87 g.

A padded and adjustable sling for optimal gear placement or when extra supplies are required for the long day out.

36 37

Bags

and

Clim

bing

Acc

esso

ries

Hi-Safe Roof Anchors and Brackets allow safe movement around the work zone. All Hi-Safe roof anchors are made from the most durable materials available and have been tested to meet Australian conditions and legislation. We recommend factory approved installers fit and commission the anchor systems, however, any competent trades person can install.

Hi-Safe RA45 BracketCodeHS-RA45

Hi-Safe LS20 BracketCode HS-LS20

Hi-Safe RA10 BracketCode HS-RA10

Hi-Safe LS16 BracketsCode HS-LS16, HS-LS16L

Hi-Safe RA60 BracketCode HS-RA60

Hi-Safe LS25 Ladder BracketCodeHS-LS25

For all timber roof structures/purlins •Can be fitted through tile or lead sheet •Access for fitting is from below or by •removing tile or lead sheetCan also be used under metal roofing •

For use on metal roofing with timber or metal purlins •Designed with step up to fit over metal roof profile •Can be fitted without need to remove roof material •

The Hi-Safe LS25 Ladder Bracket provides a simple and secure ladder mount preventing ladders slipping from structures. The design also allows ladders to be tied off to structures increasing security.

Simple to attach •Stainless steel construction for durability •Temporary restraint plate •Easy to attach using supplied roof screws •Can be moved from job to job •LS16 300 mm •LS16L 420 mm •

The unique design of the LS20 restraint anchor allows multi-width adjustment to suit varying roof materials. The unit is an all steel construction finished in high visibility safety orange and tested in excess of 1500 kg with an in-built excessive load indicator.

Suitable for clip lock and •corrugated iron roofingStainless steel eye nut •Large steel washer •Neoprene seal •Compliance plate •Not for timber usage •

36 37

Roof Anchors and Brackets

Hi-Safe Ladder LockCode HS-LLO

Code System Length

HS-CS05 5 m

HS-CS10 10 m

HS-CS15 15 m

HS-CS20 20 m

HS-CS25 25 m

HS-CS30 30 m

HS-CS35 35 m

HS-CS40 40 m

Climb Safe Ladder System

Cable Adjuster for Ladder SystemCode HS-CS1000

Hi-Safe Ladder Locks can be securely fastened to roofs or structures and are an ideal alternative to permanent ladder systems. A 1000 mm handrail provides stability when transitioning from ladder to roof – the most critical point in portable ladder egress and degress. Complies with relevant Australian Standards and guidelines.

This complete system is designed for providing safety when ascending or descending ladders. A worker attaches their body harness to the cable via a cable adjuster with shock absorbing lanyard (HS-CS1000 sold separately). They can then move freely up and down the ladder system with both hands free.

The system is mounted as a permanent fixture with the use of a top mounted bracket with energy absorber and bottom mounted bracket with a cable tension system. The ladder system is also supplied with flexible 8 mm steel cable. The ladder system is supplied ready for installation and is supplied with instructions.

Cable guide to reduce lateral movement (supplied on systems 15 m or longer)

Cable tension systemTop mounted bracket with energy absorber

The HS-CS1000 is the recommended adjuster for the above ladder system. It comes complete with built-in energy absorber, two steel screw gate karabiners and stainless steel cable adjuster. The adjuster can be removed from the cable allowing use on other ladder systems but remains locked when the karabiner is in place. Sold separately to ladder system.

38 39

Roof

Anc

hors

and

Bra

cket

s

Hi-Safe Tripod Code HS-TP10

Hi-Safe Rescue Winch Code HS-RW20T (tripod), HS-RW20D (davit)

A lightweight tripod developed by industry professionals with years of field experience.

Optional Hi-Safe Rescue Pulley System

The rescue winch has been developed to be attached to either the Hi-Safe Tripod or Davit System. The Rescue Winch utilises a Weston Brake System with steel gears, back up brake and is supplied with 20 m of cable.

It works on a basic wind up, wind down principle. Developed as a man winch for one person working or for two persons rescue. Comes complete with a re-direct pulley. Weight is 7 kg.

Key Features

Compact head frame reduces weight and size •Independently adjustable spring loaded legs minimise •the risk of accidental closure. Galvanised steel construction •High visibility orange powder coated •2.3 m head clearance •2.2 m foot print (at full extension) •Single swivel bolt attachment point •Supplied with foot tether •

Hi-Safe Davit System Codes HS-DAV SYS (complete system), HS-DAV B (Davit Base) and HS-DAV A (Davit arm and body)

Key FeaturesDurable galvinised steel construction •Simple to install and one man portable •Collapsible design •Individual bases can be installed at various work locations •allows a single davit arm to be used in various locations34 kg arm and body •14 kg base •Base dimension: 300 mm2 •

The complete Davit System is an ideal solution for scenarios lacking overhead anchor points or areas that cannot be straddled by a tripod.

Optional Hi-Safe Rescue Pulley System

Optional Rescue Winch

Davit arm nested in body

850

1610

18002000

500

38 39

Edge Managem

ent, Rescue and Escape

The Ferno Arachnipod is the world’s most versatile modular total edge management system (TEMS). Components can be added or removed as required so that the Arachnipod complements existing structural or natural features. The unique design of the patent-pending modular head means the Arachnipod can be constructed into many different configurations including a ginpole/monopole, bipod, tripod, quadpod, bridge system and handrail recovery monopole. For heavy loads, four legs can used to form a Quadpod and increase the safe working load (SWL). Its versatility makes it an ideal system for workers in industries such as rescue and emergency services, construction, military, utility services, mining, film and maintenance.

Configurations

Gin Pole/Monopole

A-Frame with Lazy Leg and reverse head

Handrail Recovery Monopole

Quadpod

Tripod

Tripod as High Directional System Bridge System

A-Frame

Sideways A-Frame using pulley head

40 41

Edge

Man

agem

ent,

Resc

ue a

nd E

scap

e

How It Works

Accessories

Arachnipod Kits

Product Contents Arachnipod Kits

Arachnipod Industrial

Industrial Plus

Arachnipod Rescue

Rescue Plus

Arachnipod TEMS

Basic tripod (without pulley) 1

Tripod (with pulley head) 1 1 1 1

Foot rope & rope grab 1 1 1 1 1

Arachnipod bag 1 1 1

Rigging plate 1

Spike feet 3

Lazy leg kit inc. Reverse head & bag 1 1

Full accessory kit 1 1

2 m bridge kit 1

Full Accessory Kit Contents Qty

Accessory bag 1

Spike feet 4

Gin head 1

Soft ground shoes 4

Hold-down stakes 4

M12 Tru-bolts 8

M12 masonry drill bit 2

Spare Qik-link head pins 2

Spare detent pins 2

Spare leg pin with detent pin 1

Steps 2

Equipment bracket 1

Rigging plate 1

Quad plate (shapekeeper) 1

The Arachnipod, in its most basic form, is a simple tripod with the three legs independently pivoting from an anodised aluminium head. The modular head has a similar design to a door hinge. Inserting or removing a pin through the centre of the head allows the quick and simple addition or removal of components to create a configuration to suit any edge management scenario. Each head section contains a shackle for guying while an optional in-built twin grooved stainless steel pulley is also available.

Standard foot Hold-down stake Spike foot Soft ground shoe

Gin headwinch and mount

Reverse head

Quad plate

Arachnipod step

Equipment bracket

Rigging plate

The modular design of the Arachnipod offers customers the option to purchase a basic unit and upgrade to make a more advanced system. Minimal space is needed to store an Arachnipod as it flat packs for simple and convenient storage. There are five kits available for purchase, ranging from the basic tripod through to a total edge management system (TEMS).

Accessory kit

* Bridge kit includes extra leg, bag and foot rope

Optional extras

3 m bridge kit

4 m bridge kit

Bridge kit s-steel upgrade kit

Additional standard leg

Additional pulley leg

Gin head

Lazy leg extension kit

10 m winch and mount (6 mm cable)

20 m winch and mount (6 mm cable)

40 41

Edge Managem


Ferno Recovery System Code FWE-FRS

The Ferno Rescue Recovery System provides a quick and simple solution for recovery of casualties in basic or complex rescue and retrieval situations. The system works effectively by a single rescue operator and when used with Ferno Res-Q-Link enables a smooth and controlled recovery of a fall casualty. Unique to this system is the combination of a mechanical advantage system and lowering system (Mini Haul Kit) which allows the rescuer to raise or lower the casualty up to 50 m to safety.

The Ferno Rescue Recovery System comes supplied preassembled, ready for immediate use and housed within a back packable heavy duty rope bag.

Ferno Mini Haul Kit Code VKIT MINI HAUL

The Ferno Mini Haul kit is an extremely compact haul kit that will provide a 6:1 mechanical advantage. It features a V-shaped cleat that if required, enables the operator to lock off the system during a hauling operation. The Ferno Mini Haul Kit is rated for one person rescue only.

Res-Q-Link Recovery Pole Code FWE2090

The Res-Q-Link is a unique and multi functional rescue pole incorporating many features and benefits including:

Large alloy double action hook compatible with most recovery •systems and allowing two configurations to provide versatility when rescuing a fall victim Extendable from 150 cm to 280 cm. •Fibreglass outer pole and rubber coated handle for maximum •grip and control in long reach scenarios.Torch holder for low light scenarios which is compatible with •most slim line torchesRope and web cutting knife to cut victim free once a recovery •system is attached. Optional aluminium extension handle up to 9 m in length •available

Large alloy hook with torch and torch holder (torch not supplied)

Large alloy hook with web cutting knife Large alloy hook, knife in stored position

42 43

Edge

Man

agem

ent,

Resc

ue a

nd E

scap

e

Hi-Safe Rescue Pulley System Code FWE-CSRK (bag), FWE-CSRD (drum)

Developed for backup and rescue situations the Hi-Safe Rescue Pulley System has a 4:1 lift advantage and a built-in lift and lock system which will also automatically lock in the event of a fall. It comes standard with a tie off adapter and 50 m of rope allowing approximately 12 m of lift. Supplied standard with a heavy duty rope bag, also available with optional dust proof stowage drum.

Optional drum

Ferno FDU Code FWE-FDU 100 (with friction rack) FWE-FDU 200 (without friction rack)

Length Width Depth Weight

FDU100 250 mm 135 mm 45 mm 950 g

FDU200 250 mm 135 mm 45 mm 730 g

The new Ferno FDU is designed for personal rescue, emergency escape, rescue operations or specialised rope work. It is a friction control, double stop, descending system, with a simple and soft moulded, operator handle. The system starts releasing its load when the handle is moved towards the central position. Should a panic grab take place and the handle is pulled past the central position, the system locks up into the double stop mode.

This mode will only be maintained with the force exerted by the operator, until a gentle release takes place. If the handle is let go, the system automatically locks. For rescue loads (2 persons) the Ferno FDU is available with an additional friction rack. The Ferno FDU has been extensively tested with Donaghys 11 mm Rescue Response Static Rope and Donaghys 11 mm Response XT Rope and when used with either of these ropes will conform to AS/NZS 4488.1:1997.

Dimensions taken with handle in stored position

FDU100

FDU200

Rope Length Width Depth Weight

11 mm - 12 mm 160 mm 79 mm 29 mm 450 g*

Exodus Escape Device Code HS-RE20

Forming the heart of the EPV kit this incredibly simple unit can be used for descent and belaying. Constructed from premium quality aircraft grade aluminium and tested in excess of 15 kN. Supplied with steel screw gate karabiner.

*weight without karabiner

Spreader BarCode VAI SPREADER SHA

Used in confined space situations and rescue scenarios. Attaches to confined space pick up points on harness shoulder straps.

AS/NZS 1891.1:2007 approved.

42 43

Edge Managem


Remote Attachment DeviceA remote attachment device with a large double action hook for hard to access areas with the ability to reach and attach to access points such as ladders, cattle trucks or any attachment point that is not reachable by conventional means . This device will allow you to attach a large double action hook prior to commencing a task as well retrieving the double action hook once the task is complete.

Gate Opening PulleyLarge heavy-duty pulley with a unique opening gate that provides the user with the ability to remove or attach the rope from the pulley without disengaging from their main anchor karabiner.

Glass Management KitA complete glass management kit that is ideal for road accident and rescue. This kit will include all items for glass management and removal that would be required in the event of a road accident related incident.

Centrepoint Hardpoint Rescue HarnessAdding to our array of Centrepoint harnesses will be the inclusion of a hard eye attachment point. Provided with all the standard industry renowned features this new harness will also be available with a built-in ascender version for rope access technicians.

Stretcher Equipment BridgeA unique bridge that will incorporate many features requested by ambulance services for many years. Lightweight, fold-away and very compact with easy patient access on and off the stretcher. As well as a generous platform area the stretcher bridge incorporates two IV poles and allows attachment for IV infusers as well as syringe drivers. It is designed to hold 35 kg and to withstand 20G forward, 10G sidewards as per Australian Crash Test Standards AS/NZS 4535:1999

Products for Release 2010

44

Prod

ucts

for R

elea

se 2

010

© Ferno Australia Pty Ltd 2010

All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without the prior written consent of Ferno Australia. Whilst every care has been taken to prevent printing errors, colours and reproduction is subject to the usual tolerances of the printing process. Specifications may be changed in line with current legislations and standards E&OE.

Care of this equipment

Always inspect your equipment before use for any signs of wear and tear. If in doubt retire the item. Our products are susceptible to abraison, corrosive chemicals and UV degradation. When stitching becomes frayed or damaged it should be retired or repaired. Wash periodically in luke warm water and mild detergent. Air dry away from direct sunlight. Store your equipment out of direct sunlight and dust. Do not store equipment wet. Do not tumble dry or dry clean. If any of our equipment is subject to a serious fall it should be retired.

Use of this equipment

If you use Ferno equipment, you are responsible for learning and utilising safe techniques. We disclaim all liability for any injury or loss arising from the use of this equipment. It is the user’s responsibility for maintaining this equipment in correct working condition. The products in this catalogue are designed for specific purposes and must not be used in any manner other than for which they are designed. Do not use any equipment in this catalogue until you receive proper training in the use of that equipment.

44

Acknowledgements

Designer: Choice Creative

Ferno AustraliaHead Office 11 Johnstone Road Brendale Qld 4500 AustraliaCall toll free 1800 804 647p +61 7 3881 4999 f +61 7 3881 1125VIC 18 Damosh Avenue Carrum Downs VIC 3201 p +61 3 9775 1260 f +61 3 9775 1360WA 22 Casella Place Kewdale WA 6105 p +61 8 9353 2300 f +61 8 9353 1169

www.ferno.com.au

0001

8

EmergencyRescueHeight SafetyRock ClimbingHome CareMortuary

Documents

Ferno Australia Export Catalogue...Ferno Australia’s purpose-built factories are located around the country – in Brisbane, Perth and Melbourne – all of which are equipped with