Upload
kamal-verma
View
92
Download
1
Tags:
Embed Size (px)
DESCRIPTION
fiber details
Citation preview
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 1
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 2
CONTENTSCOMPANY OVER VIEW Page 4
CERTIFICATES AND APPROVALS Page 5-16
MEFC PRODUCT OVER VIEW Page 17-18
QUALITY ASSURANCE AND QUALITY CONTROL Page 19-20
INDUSTRY / MEFC OPTICAL FIBERS ITU G.652B SINGLE MODE DISPERSION UN-SHIFTED OPTICAL FIBER (STANDARD) Page 21
ITU G.652C SINGLE MODE DISPERSION UN-SHIFTED OPTICAL FIBER (LOW WATER PEAK) Page 22
ITU G.655 SINGLE MODE NON-ZERO DISPERSION SHIFTED FIBER (REDUCED SLOPE) Page 23
ITU G.655 SINGLE MODE NON-ZERO DISPERSION SHIFTED FIBER (LARGE EFFECTIVE) Page 24
62.5/125 nm MULTI MODE OPTICAL FIBER Page 25
INDUSTRY / MEFC STANDARD CABLES OUTDOOR CABLES
DUCT NON-METALLIC O.F.CABLE Page 27
DUCT METALLIC O.F. CABLE Page 28
DIRECT BURIED NON-METALLIC O.F.CABLE Page 29
DIRECT BURIED METALLIC O.F.CABLE Page 30
STEEL TAPE ARMORED(SINGLE SHEATH) O.F.CABLE Page 31
STEEL TAPE ARMORED(DOUBLE SHEATH) O.F.CABLE Page 32
STEEL TAPE DOUBLE ARMORED O.F.CABLE Page 33
STEEL TAPE ARMORED MONO TUBE O.F.CABLE Page 34
STEEL WIRE ARMORED O.F.CABLE Page 35
BRAIDED STEEL WIRE ARMORED O.F.CABLE Page 36
LEAD SHEATH STEEL WIRE ARMORED O.F.CABLE Page 37
HYBRID O.F.CABLE Page 38
FIRE RESISTANCE O.F.CABLE Page 39
ADSS AERIAL O.F. CABLE Page 40
AERIAL FIG-8 O.F. CABLE (METTALLIC) Page 41
AERIAL FIG-8 O.F. CABLE (ALL DIE ELECTRIC) Page 42
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 3
INDOOR CABLES
INDOOR SIMPLEX O.F.CABLE Page 43
INDOOR ZIP CORD O.F.CABLE Page 44
FLAT DUPLEX O.F. CABLE Page 45
INDOOR BREAK OUT O.F.CABLE Page 46
INDOOR BACK BONE O.F.CABLE Page 47
INDOOR DISTRIBUTION O.F. CABLE Page 48
INDOOR/OUTDOOR CABLESINDOOR/OUTDOOR DRY O.F. CABLES Page 49
INDOOR/OUTDOOR ARMORED O.F.CABLE Page 50
CUSTOMER SPECIFIC OPTICAL FIBER CABLESSAUDI ARAMCO STANDARD OPTICAL FIBER CABLES (VENDOR CODE : 10028837) Page 51-52
SAUDI ELECTRIC COMPANY (SCECO-EAST) VENDOR CODE : M-3095 Page 53
SAUDI TELECOM COMPANY (MAT-1601) Page 54
SAUDI TELECOM COMPANY (MAT-1602) Page 55
SAUDI ELECTRIC COMPANY (SCECO-CENTRAL) Page 56
TACTICAL O.F. CABLE Page 56
OPTICAL FIBER SPECIFICATIONSSINGLE MODE FIBER SPECIFICATION (CABLES) Page 57
MULTI MODE FIBER SPECIFICATION (CABLES) Page 58
MEFC FIBER OPTIC SERVICES Page 59
RELATED TRADINGS - FIBER ACCESSORIES CONNECTORS Page 60
PATCH CORDS/PIG TAILS Page 61
JOINT CLOSURES/TERMINATION BOXES Page 62
GLOSSORY OF FIBER OPTIC TERMS Page 63-69
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 4
COMPANY OVERVIEW
Middle East Fiber Optic Cable Mfg. Co. (MEFC), a Saudi American Joint Venture located in Riyadh Saudi Arabia. Founded in 1995 together with FiberCore and Royle Systems Group from USA, to manufacture a comprehensive state-of-the-art Fiber and Fiber Optic Cables, to serve Communication Service Providers, Data Communications, SCADA Systems, WANs, LANs, CCTV, Military Tactical Communications, Present 10 Gigabit Ethernet and FTTX Customers.
In very short time, MEFC has achieved Excellence Quality Reputation and Market Share in the Gulf, Middle East and African countries.
MEFC accredited with several certifications for its Product and Quality System from independent International testing agencies, such as British Standards Institute (BSI), Underwriter Laboratories (UL), Canadian Standards Association (CSA), Telcordia, TUV etc. Based on that MEFC has been approved by all major clients such as Saudi Aramco, Saudi Telecom Company, Electricity and Water Authorities, Kuwait Oil Company etc and all Major Oil and Gas Industries in the region. MEFC Cable specification meets all International Standards,
MEFC was also able to have a strong presence and maintain a reputation in the international market by supplying Optical Fibers and Optical fiber cables to United States, Europe, Asia and African Countries.
MEFC has capability to meet and exceed customers requirements and specifications. MEFC manufactures wide ranges of Optical fibers and Optical fiber cables.
A brief summary of these products is:
Optical Fibers: Single Mode Dispersion un-shifted, Non-Zero Dispersion shifted, Multi Mode.
Optical Fiber Cables:
Indoor Simplex, Duplex, Breakout, Backbone and Distribution Outdoor Under Ground Duct, Direct Buried, Armored Aerial - ADSS, Fig-8 Indoor / Outdoor Fire Resistant both Non-Metallic and Metallic.
With a clearly strategy, common mission to provide best quality products and emerge as a leader in the industry, MEFC poised for success and growth.
Our Team is committed to deliver state and the art of technology with continuous improvement, on time delivery, best quality fiber and fiber optic cable products and after sales services.
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 6
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 7
CERTIFICATES / APPROVALS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 8
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 9
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 10
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 11
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 12
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 13
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 14
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 15
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 16
CERTIFICATES / APPROVALS
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 17
MEFC PRODUCT OVERVIEW
MEFC manufactures all latest technology optical fibers as per International Standards.Optical fibers are made from high quality silica glass and coated with dual layer acrylic material to give protection against micro bending, mechanical abrasion and temperature changes. MEFC Optical fibers are produced in highly clean environment and are ensured to maintain their pristine state through out manufacturing. Each fiber is proof tested to ensure that the fiber will function for a full life time of more than 30 years under residual stress conditions. With one of the best-equipped testing laboratories optical, geometrical, mechanical and environmental properties are measured for compliance to international standards, ITU, IEC, EIA/TIA etc. Tighter geometrical tolerance, high fiber curl and low PMD are the primary benefits of MEFC fiber which gives cost saving for the cable installers.
Selection Of Right Type Of Fiber While choosing right type of Optical fiber for the networks, in general, the following factors shall be considered: Present capacity requirements Future demand and requirements Active and Passive component costs
While many factors have to be evaluated when selecting fibers for a given network, two key parameters attenuation and dispersion are primarily important factors.
Attenuation is the signal loss as travels through a fiber. Dispersion is the natural tendency of the different wavelengths in the light pulses to spread with distance traveled.
Optical fibers are normally classified into two types, Single Mode and Multi Mode according to the no. of modes the fiber carries.
1.1.a SINGLE MODE FIBERSingle Mode Fibers are Further Classified into three categories by International Telecommunication Union based on the properties of Dispersion
G.652 Dispersion Un-shifted Single Mode FiberAlso called as Standard Single Mode Fibers (9/125 nm)
G.653 Dispersion shifted FiberThe dispersion at 1550nm is almost zero, these fibers are almost out dated due to the factors than they cannot be used in WDM and DWDM applications
G.655 Non Zero Dispersion Shifted FibersAdvanced fiber technology for applications upto 40G.bits/sec. In both WDM and DWDM applications.
STANDARD SINGLE MODE FIBER (9/125) (ITUG.652)ITU further divided the Single mode optical fibers are classified into A,B,C,D categories based on the applications attenuation and Dispersion and geometrical Parameters
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 18
MEFC PRODUCT OVERVIEW
ITU G.652.AThese Fiber are devised for transmission systems operating up to STM-16 ( 2.5 Gbits/Sec) , and are designed to operate at 1310 nm and 1550 nm Wave Length.
ITU G.652.BThese Fiber are devised for transmission systems operating up to STM-64 (10 Gbits/Sec), with tighter tolerance of PMD and Geometrical parameters and are designed to operate at 1310 nm and 1550 nm Wave Length.
ITU G.652.CThese Fiber are devised for transmission systems operating up to STM-64 (10 Gbits/Sec), allows transmission up to extended range 1260-1620 nm. The lower pear attenuation at 1380 nm allows these fibers can be utilized from 1260-1620 nm.
ITU G.652.DThese Fiber are devised for transmission systems operating up to STM-64 (10 Gbits/Sec), allows transmission up to extended range 1260-1620 nm. The lower pear attenuation at 1380 nm allows these fibers can be utilized from 1260-1620 nm, with tighter tolerance of PMD and Geometrical parameters of fibers.
G.655- Non Zero Dispersion Shifted Single Mode Fibers
These fibers are having minimum dispersion at 1550 nm for longer distance applications. Non zero dispersion shifter single mode fiber (NZDSF) is operated for WDM and DWDM systems which enables customer to construct high performance wired networks for voice, video and / or data transmission.
1.1.b Multi Mode Fibers
Multi Mode Fibers (MMF) provides a high performance in a wide range of application, suitable for short length networks and installed in the distribution portion of any telecommunications network. The have been classified on its Core diameter and Bandwidth requirements. Multi Mode Fibers are of two types even though ITU recognizes the with same standards, based on its core diameter. Multi Mode Fiber is differentiated as 50/125 and 62.5/125 nm
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 19
As an ISO 9001: 2000 certified company, MEFC has been successfully implementing the quality management system requirements with a complete commitment to satisfy the Customer needs. Our experienced and highly skilled engineers/inspectors test the incoming raw materials, conduct in process inspection at every cable manufacturing stage, verify the compliance to the requirements after every process. Finished cables are tested as per national /international standards & customer specifications.
Our cables meet the performance requirements of local utility Companies & national and international standards namely SCECO, ARAMCO, MAT (Saudi Telecom Standards), IEC,ITU-T, EIA/TIA, BS, BELL CORE, RUS-PE 90.
Our Quality staff conducts tests to verify the performance and reliability of Optical fibers. These tests include Fiber strength, Attenuation Co-efficient, Attenuation uniformity, Mode field diameter, Cutoff Wavelength, Chromatic Dispersion, Polarization mode dispersion, Bandwidth, Numerical aperture, Cladding diameter, Concentricity error, Non-circularity and Coating diameter. The measurement in respect of above referred fiber parameters is carried out before the cabling process using advanced computer controlled test equipment, which are calibrated using international standard artifacts at regular intervals. These optical fibers are manufactured and tested in a dust free clean room environment. Type tests such as Macro bending, Temperature cycling are conducted periodically an optical fibers to the latest standards.
Colored fibers are tested for MEK and compatibility with material, which they come in contact with when they are cabled. In order to verify the ability to withstand the extreme climate conditions, all the plastics components of the cable are tested for shrink back and cold bend test before being approved for processing.
QUALITY ASSURANCE AND QUALITY CONTROL
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 20
QUALITY ASSURANCE AND QUALITY CONTROL
After the stage wise inspection, routine tests- attenuation co-efficient, Attenuation uniformity, water ingress test on filled cables, physical dimensions and surface quality, are carried out on the finished cables.
In order to ensure the finished cables function satisfactorily for at least 30 to 40 years without degradation to the Optical transmission, type tests are conducted for every design periodically. Tensile loading, Fiber strain, Flexing, Repeated Bend, Impact, Crush, Torsion, Temperature cycling, Compound Flow tests are conducted using automated equipments to precisely apply the conditions laid down in international standards as well as customers specifications.
The process and product quality characteristics are analyzed using statistical quality control techniques. X-bar and R charts, Normal Distribution analysis, Pareto Analysis, Percentile charts, P-charts are widely used statistical techniques for monitoring of test equipment and product quality characteristics in MEFC.
Our commitment towards delivering highest quality optical fiber cables is quality assurance to our customers that they can reap the benefits of peak performance from their fiber optic network.
OTDR TRACE OF OPTICAL FIBER CHROMATIC DISPERSION
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 21
ITU G.652B SINGLE MODE DISPERSION UN-SHIFTED OPTICAL FIBER (STANDARD)
MEFC's OptiGlow-SMF optical fiber is a matched clad Dispersion un-shifted single mode fiber A dual layer UV cured acrylate coating is applied over the pure glass cladding. This high quality coating protects the fiber from mechanical and environmental stresses and has excellent bend resistance characteristics.
OptiGlow-SMF is optimized for use in 1310nm window by offering low dispersion and also can be used in 1550nm window.
Telcordia certifies MEFCs fiber for G.652 international standard. Also, OptiGlow-SMF meets IEC-60793-2 Telcordia GR-20-Core and TIA/EIA 492- Class IVa standards.
OptiGlow-SMF has the distinction of having low PMD that makes high bit rate transmission possible. High curl values of OptiGlow are added advantage to the manufacturers of ribbon cables and installers as high curl values permit much faster splicing
MEFC's optical fibers are manufactured using Vapor Phase Axial Deposition (VAD) process. VAD process is the most efficient process for controlling optical and geometrical properties of optical fibers.
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 22
ITU G.652D SINGLE MODE DISPERSION UN-SHIFTED OPTICAL FIBER (LOW WATER PEAK)
MEFC's OptiGlow-LWP optical fiber is a matched clad Dispersion un-shifted single mode fiber A dual layer UV cured acrylate coating is applied over the pure glass cladding. This high quality coating protects the fiber from mechanical and environmental stresses and has excellent bend resistance characteristics.
Low attenuation of OptiGlow-LWP in broad range of wavelengths including water peak enables CWDM transmission for increased network capacity.
Attenuation characteristics are stabilized against Hydrogen. It is designed for use in wavelengths between 1280 to 1625nm. It has superior attenuation performance throughout this band.
OptiGlow-LWP is fully compatible with conventional Single Mode Fiber. Its low PMD and improved bending performance and high Curl advantage to the manufacturers of ribbon cables and installers as high curl values permit much faster splicing
MEFC's optical fibers are manufactured using Vapor Phase Axial Deposition (VAD) process. VAD process is the most efficient process for controlling optical and geometrical properties of optical fibers.
D
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 23
ITU G.655 SINGLE MODE NON-ZERO DISPERSION SHIFTED FIBER (REDUCED SLOPE)
MEFC's OptiShine-RS optical fiber is a matched Clad Non-Zero Dispersion shifted single mode optical fiber. A dual layer UV cured acrylate coating is applied over the pure glass cladding. This high quality coating protects the fiber from mechanical and environmental stresses and has excellent bend resistance characteristics.
OptiShine-RS is optimized for use in 1550nm window by offering low dispersion to over come non-linear effects. Its Reduced slope makes it possible to keep the dispersion values low over a wide range of wavelengths there by reducing dispersion compensation.
OptiShine-RS meets all the international standards, ITU-T G.655, IEC-60793-2 and EIA/TIA-492- Class IVd standards.
OptiShine-RS has the distinction of having low PMD that makes high bit rate transmission possible. High curl values of OptiShine-RS are added advantage to the manufacturers of ribbon cables and installers as high curl values permit much faster splicing.
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 24
ITU G.655 SINGLE MODE NON-ZERO DISPERSION SHIFTED FIBER (LARGE EFFECTIVE)
MEFC's OptiShine-LEA optical fiber is a matched Clad Non-Zero Dispersion shifted single mode Optical fiber. A dual layer UV cured acrylate coating is applied over the pure glass cladding. This high quality coating protects the fiber from mechanical and environmental stresses and has excellent bend resistance characteristics.
OptiShine-LEA is optimized for use in 1550nm window by offering Large Effective Area to over come non-linear effects.
OptiShine-LEA meets all the international standards, ITU-T G.655, IEC-60793-2 and EIA/TIA 492-Class IVd standards.
OptiShine-LEA has the distinction of having low PMD that makes high bit rate transmission possible. High curl values of OptiShine-LEA are added advantage to the manufactures of ribbon cables and installers as high curl values permit much faster splicing.
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 25
62.5/125 nm MULTI MODE OPTICAL FIBER
MEFC's OptiLan-62 is a Graded Index 62.5/125um Multi Mode Fiber. A dual layer UV cured acrylate coating is applied over the pure glass cladding. This high quality coating protects the fiber from mechanical and environmental stresses and has excellent bend resistance characteristics. OptiLan-62 meetsITU-T G.651 standard and fulfills the FDDI requirements for LAN cabling. Tight buffer process for indoor cables with MEFC's fiber is hassle free as the best results can be obtained with OptiLan-62.
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 26
50/125 nm MULTI MODE OPTICAL FIBER
MEFC's OptiLan-50 is a Graded Index 50/125um Multi Mode Fiber. A dual layer UV cured acrylate coating is applied over the pure glass cladding. This high quality coating protects the fiber from mechanical and environmental stresses and has excellent bend resistance characteristics. OptiLan-50 meets ITU-T G.651 standard and fulfills the FDDI requirements for LAN cabling. Tight buffer process for indoor cables with MEFC's fiber is hassle free as the best results can be obtained with OptiLan-50.
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 27
DUCT NON METALLIC O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Peripheral Strength Members - Polyethylene Outer Jacket
DESCRIPTION
The construction of the non-metallic cables begins with our proven loose tube design. The loose tube provides protection against environmental and mechanical forces. This smaller diameter cable is light weight and suitable enough for duct and conduit use
APPLICATIONSInter Office Trunking, Data, Video Transmission, Control /Alarm System - Light Weight and Flexible - Laying in Ducts and Concrete
FEATURES AND BENEFITS
Suitable for conduits and pipelines for long haul applications Supports all grades of single mode and multimode fibers It can be laid in vicinity of power cables No additional grounding is required, at vicinity of power lines and lighting risks Telemetry and SCADA links for oil & gas, electricity.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Fiber FiberperNo.ofactive
OUTER DIA
Min.BendingRadius(MM Net Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655) count
Loosetube
Loosetubes (MM)
NOLOAD
UNDERLOAD (Kg/km)
ADUN6004 ADUN5004 ADUN1004 ADUN4004 4 4 1 10.4 104 208 96
ADUN6008 ADUN5008 ADUN1008 ADUN4008 8 4 2 10.4 104 208 97
ADUN6012 ADUN5012 ADUN1012 ADUN4012 12 4 3 10.4 104 208 98
ADUN6024 ADUN5024 ADUN1024 ADUN4024 24 4 6 10.4 104 208 100
ADUN6036 ADUN5036 ADUN1036 ADUN4036 36 6 6 11.6 116 232 113
ADUN6048 ADUN5048 ADUN1048 ADUN4048 48 8 6 12.8 128 256 145
ADUN6096 ADUN5096 ADUN1096 ADUN4096 96 12 8 14.8 148 296 212
ADUN6144 ADUN5144 ADUN1144 ADUN4144 144 24 6 18.5 277 370 269
ADUN6192 ADUN5192 ADUN1192 ADUN4192 192 24 8 21.4 321 478 387
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 28
DUCT METALLIC O.F. CABLE
CABLE CONSTRUCTION Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Peripheral Strength Members - Identification Tape - Aluminum Moisture Barrier Tape - Polyethylene Outer Jacket
DESCRIPTION
The construction of the metallic cables begins with our proven loose tube design. The loose tube provides protection against environmental and mechanical forces. This smaller diameter cable is light weight and suitable enough for duct and conduit use
APPLICATIONSInter Office Trunking, Data, Video Transmission, Control /Alarm System - Light Weight and Flexible - Laying in Ducts and Concrete
FEATURES AND BENEFITS
Suitable for conduits and pipelines for long haul applications Supports all grades of single mode and multimode fibers It can be laid in vicinity of power cables Telemetry and SCADA links for oil & gas, electricity.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Fiber FiberperNo.ofactive
outerdia
Min.BendingRadius(MM
NetWeight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655) count
Loosetube
Loosetubes (MM)
NOLOAD
UNDER
LOAD (Kg/km)
ADUN6004 S ADUN5004 S ADUN1004 S ADUN4004 S 4 4 1 11.2 112 224 103
ADUN6008 S ADUN5008 S ADUN1008 S ADUN4008 S 8 4 2 11.2 112 224 104
ADUN6012 S ADUN5012 S ADUN1012 S ADUN4012 S 12 4 3 11.2 112 224 105
ADUN6024 S ADUN5024 S ADUN1024 S ADUN4024 S 24 4 6 11.2 112 224 108
ADUN6036 S ADUN5036 S ADUN1036 S ADUN4036 S 36 6 6 12.0 120 240 127
ADUN6048 S ADUN5048 S ADUN1048 S ADUN4048 S 48 8 6 13.7 137 274 152
ADUN6096 S ADUN5096 S ADUN1096 S ADUN4096 S 96 12 8 15.5 155 310 186
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 29
DIRECT BURIED NON METALLIC O.F. CABLE
CABLE CONSTRUCTION Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Polyethylene Inner sheath - Peripheral Strength Members - Water Blocking Material - Polyethylene Outer Jacket
DESCRIPTION
Double Jacket is an excellent choice for installation requiring the added mechanical and environmental protection of two durable polyethylene jackets. This Double Jacketed cable is directly buried in trenches.
APPLICATIONSJunction Communication System, Subscriber Network System - Data, Video Transmission Direct Buried Installation
FEATURES AND BENEFITS * Supports all grades of single mode and multimode fibers * No Additional Grounding is required, at the vicinity of power lines and lighting risks.* Long Haul Telecommunication* Suitable for Lying in the trenches
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Fiber FiberperNo.ofactive
outerdia
Min.BendingRadius(MM
NetWeigh
t
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655) count
Loosetube
Loosetubes (MM)
NOLOAD
UNDERLOAD Kg/km
ADUN6004 ADUN5004 ADUN1004 ADUN4004 4 4 1 13.2 132 264 129
ADUN6008 ADUN5008 ADUN1008 ADUN4008 8 4 2 13.2 132 264 131
ADUN6012 ADUN5012 ADUN1012 ADUN4012 12 4 3 13.2 132 264 131
ADUN6024 ADUN5024 ADUN1024 ADUN4024 24 4 6 13.2 132 264 133
ADUN6036 ADUN5036 ADUN1036 ADUN4036 36 6 6 14.4 144 288 159
ADUN6048 ADUN5048 ADUN1048 ADUN4048 48 8 6 15.6 156 312 188
ADUN6096 ADUN5096 ADUN1096 ADUN4096 96 12 8 17.6 176 352 249
ADUN6144 ADUN5144 ADUN1144 ADUN4144 144 24 6 20.1 301 402 333
ADUN6192 ADUN5192 ADUN1192 ADUN4192 192 24 8 23.0 345 460 414
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 30
DUCT BURIED METALLIC O.F. CABLE
CABLE CONSTRUCTION Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Peripheral Strength Members - Identification Tape - Aluminum Moisture Barrier Tape - Polyethylene Inner sheath - Water Blocking Material - Polyethylene Outer Jacket
DESCRIPTION
Double Jacket is an excellent choice for installation requiring the added mechanical and environmental protection of two durable polyethylene jackets. This Double Jacketed cable is directly buried in trenches.
APPLICATIONSJunction Communication System, Subscriber Network System - Data, Video Transmission Direct Buried Installation
FEATURES AND BENEFITS
* Supports all grades of single mode and multimode fibers
* Long Haul Telecommunication
* Suitable for Lying in the trenches
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Fiber FiberperNo.ofactive
outerdia
Min.BendingRadius(MM
NetWeight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655) count
Loosetube
Loosetubes (MM)
NOLOAD
UNDER
LOAD (Kg/km)
ADUN6004 ADUN5004 ADUN1004 ADUN4004 4 4 1 13.6 136 272 148
ADUN6008 ADUN5008 ADUN1008 ADUN4008 8 4 2 13.6 136 272 149
ADUN6012 ADUN5012 ADUN1012 ADUN4012 12 4 3 13.6 136 272 150
ADUN6024 ADUN5024 ADUN1024 ADUN4024 24 4 6 13.6 136 272 153
ADUN6036 ADUN5036 ADUN1036 ADUN4036 36 6 6 14.8 148 296 171
ADUN6048 ADUN5048 ADUN1048 ADUN4048 48 8 6 16.0 160 320 216
ADUN6096 ADUN5096 ADUN1096 ADUN4096 96 12 8 18.0 180 360 260
CONTENTS
AdministratorCONTENTS
AdministratorDIRECT
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 31
STEEL TAPE ARMOURED (SINGLE SHEATH) O.F. CABLE
CABLE CONSTRUCTION Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Peripheral Strength Members - Water Blocking Material - Corrugated Steel Tape Armour -Polyethylene Outer Jacket
DESCRIPTION
MEFC offers steel tape armored optical cable, which has been popular cabling solution for outside plant applications. Corrugated steel tape and a robust polyethylene outer jacket combine to deliver rugged durability and added rodent resistance.
APPLICATIONS- Rodent Resistant- Direct Buried Installation- Data, Video, Voice, Transmission
FEATURES AND BENEFITS
Supports all grades of single mode and multimode fibersOffers excellent crush resistance
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Fiber FiberperNo.ofactive
outerdia
Min.BendingRadius(MM
NetWeight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted(G.652)
SMNZDS(G.655) count
Loosetube
Loosetubes (MM)
NOLOAD
UNDER
LOAD (Kg/km)
AAMM6004 S AAMM5004 S AAMM1004-S AAMM4004-S 4 4 1 12.9 193 258 174
AAMM6008 S AAMM5008 S AAMM1008-S AAMM4008-S 8 4 2 12.9 193 258 175
AAMM6012 S AAMM5012 S AAMM1024-S AAMM4024-S 12 4 3 12.9 193 258 175
AAMM6024 S AAMM5024 S AAMM1012-S AAMM4012-S 24 4 6 12.9 193 258 177
AAMM6036 S AAMM5036 S AAMM1036-S AAMM4036-S 36 6 6 14.1 211 282 216
AAMM6048 S AAMM5048 S AAMM1048-S AAMM4048-S 48 8 6 15.3 229 306 260
AAMM6096 S AAMM5096 S AAMM1096-S AAMM4096-S 96 12 8 17.3 259 346 306
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 32
STEEL TAPE ARMOURED (DOUBLE SHEATH) O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap -
Peripheral Strength Members - Water Blocking Material - Corrugated Steel Tape Armour -Polyethylene Outer Jacket
DESCRIPTION
MEFC offers steel tape armored optical cable, which has been popular cabling solution for outside plant applications. Corrugated steel tape and a robust polyethylene outer jacket combine to deliver rugged durability and added rodent resistance.
APPLICATIONS- Rodent Resistant- Direct Buried Installation- Data, Video, Voice, Transmission
FEATURES AND BENEFITS
Supports all grades of single mode and multimode fibersOffers excellent crush resistance and projects from Rodent attacks
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted(G.652)
SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No.ofactive
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
AAMM6004 D AAMM5004 D AAMM1004-D AAMM4004-D 4 4 1 14.0 210 280 197
AAMM6008 D AAMM5008 D AAMM1008-D AAMM4008-D 8 4 2 14.0 210 280 198
AAMM6012 D AAMM5012 D AAMM1024-D AAMM4024-D 12 4 3 14.0 210 280 199
AAMM6024 D AAMM5024 D AAMM1012-D AAMM4012-D 24 4 6 14.0 201 280 205
AAMM6036 D AAMM5036 D AAMM1036-D AAMM4036-D 36 6 6 15.1 225 302 228
AAMM6048 D AAMM5048 D AAMM1048-D AAMM4048-D 48 8 6 16.3 244 326 266
AAMM6096 D AAMM5096 D AAMM1096-D AAMM4096-D 96 12 8 18.3 274 366 332
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 33
STEEL TAPE DOUBLE ARMOURED O.F. CABLE
CABLE CONSTRUCTION Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Peripheral Strength Members - Polyethylene Inner Sheath - Corrugated Steel Tape Armour -Polyethylene Intermediate Sheath - Corrugated Steel Tape Armour -Polyethylene Outer Jacket
DESCRIPTION
MEFC offers steel tape double armored optical cable, rugged and heavy-duty fiber which has been popular cabling solution for harsh environment . Corrugated steel tape and a robust double polyethylene outer jacket combine to deliver rugged durability and added rodent resistance.
APPLICATIONS- Rodent Resistant- Heavy Duty - Data, Video, Voice, Transmission
FEATURES AND BENEFITS
Supports all grades of single mode and multimode fibers Offers excellent crush resistance
For Lying in Harsh Environment
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Fiber FiberperNo.ofactive
outerdia
Min.BendingRadius(MM
NetWeight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655) count
Loosetube
Loosetubes (MM)
NOLOAD
UNDER
LOAD (Kg/km)
AAMM6004 T AAMM5004 T AAMM1004-T AAMM4004-T 4 4 1 17.7 265 354 341
AAMM6008 T AAMM5008 T AAMM1008-T AAMM4008-T 8 4 2 17.7 265 354 342
AAMM6012 T AAMM5012 T AAMM1024-T AAMM4024-T 12 4 3 17.7 265 354 343
AAMM6024 T AAMM5024 T AAMM1012-T AAMM4012-T 24 4 6 17.7 265 354 345
AAMM6036 T AAMM5036 T AAMM1036-T AAMM4036-T 36 6 6 18.9 283 378 390
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 34
STEEL TAPE ARMOURED MONO TUBE O.F. CABLE
CABLE CONSTRUCTION
Fiber Bundles in Loose Tube filled with Gel - Peripheral Strength Members - Corrugated Steel Tape Armour - Steel Wires embedded in Polyethylene Outer Jacket
DESCRIPTION
MEFC offers flexible and cost effective mono tube design for outdoor applications. Optical fibers are bundled in a single tube, and a required tensile strength is obtained without strength member using two supporting steel wires. For Specific applications MEFC can offer all dielectric mono tube design
APPLICATIONS- Rodent Resistant - Data, Video, Voice, Transmission
FEATURES AND BENEFITS
Flexible and Light weight Installation Friendly
Cost Effective
For Lying in Harsh Environment
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Fiber FiberperNo.ofactive
outerdia
Min.BendingRadius(MM
NetWeight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655) count
Loosetube
Loosetubes (MM)
NOLOAD
UNDER
LOAD (Kg/km)
AAMM6004-M AAMM5004 M AAMM1004-M AAMM4004-M 4 4 1 11.6 174 232 170
AAMM6008-M AAMM5008 M AAMM1008-M AAMM4008-M 8 4 2 11.6 174 232 170
AAMM6012-M AAMM5012 M AAMM1024-M AAMM4024-M 12 4 3 11.6 174 232 171
AAMM6024-M AAMM5024 M AAMM1012-M AAMM4012-M 24 4 6 11.6 174 232 172
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 35
STEEL WIRE ARMOURED O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Polyethylene Inner Sheath - Helically Stranded Steel Wires - Polyethylene Outer Jacket
DESCRIPTION
MEFC Steel wire armored cable offers applications for higher tensile requirements. The cable consists of two rugged polyethylene jackets to deliver the strength and rodent resistance, need for tough outside plant use.
APPLICATIONS- Rodent Resistant Direct Buried Installation Data, Video, Voice, Transmission
FEATURES AND BENEFITS
Supports all grades of single mode and multimode fibers
Enhanced compressive strength and rodent resistance
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 5000 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No.ofactive
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
ASWM6004 ASWM5004 ASWM1004 ASWM4004 4 4 1 14.4 216 288 355
ASWM6008 ASWM5008 ASWM1008 ASWM4008 8 4 2 14.4 216 288 356
ASWM6012 ASWM5024 ASWM1024 ASWM4024 12 4 3 14.4 216 288 357
ASWM6024 ASWM5012 ASWM1012 ASWM4012 24 4 6 14.4 216 288 358
ASWM6036 ASEM5036 ASWM1036 ASWM4036 36 6 6 15.6 234 312 443
ASWM6048 ASWM5048 ASWM1048 ASWM4048 48 8 6 16.8 252 336 506
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 36
BRAIDED STEEL WIRE ARMOURED O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel Peripheral Strength Member - Polyethylene Inner Sheath - Steel Wire Braiding - Polyethylene Outer Jacket
DESCRIPTION
MEFC Steel wire armored fiber optic cable offers excellent resistance and flexibility with high tensile strength . These cables covered with tow rugged polyethylene jackets as well, to resist the rodent attacks.
APPLICATIONS- Rodent Resistant Direct Buried Installation Data, Video, Voice, Transmission
FEATURES AND BENEFITS
Greater Flexibility
Enhanced compressive strength and rodent resistance
Supports all graded of single mode and multi mode fibers
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, Aqua Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
ABWM6004 ABWM5004 AAMM1004 ABWM4004 4 4 1 12.7 190 254 231
ABWM6008 ABWM5008 AAMM1008 ABWM4008 8 4 1 12.7 190 254 231
ABWM6012 ABWM5012 AAMM1012 ABWM4012 12 4 1 12.7 190 254 231
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 37
LEAD SHEATH STEEL WIRE ARMOURED O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel -Stranded around Central Strength Members - Interstices filled with Gel - Core Wrap - Flame Retardent PVC Inner Sheath - Lead Sheath - Second Inner Sheath - Helically stranded Steel Wire Armour -Flame Retardent PVC Outer Jacket
DESCRIPTION
MEFC offers Lead Sheathed Optical Fiber Cables which have an secondary sheath covered over an inner polyethylene sheath to protect the cable within from aromatic hydrides. These cables are covered by high tensile strength.
APPLICATIONS- Petrochemical Plants - Junction Communication System, LANs - Direct Buried Installation
FEATURES AND BENEFITS
Installation in location where aromatic carbon hydrides are present .like near petrol stations.
In the vicinity of pipe lines
In oil refineries and similar locations.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
ALAM6004 ALAM5004 ALAM1004 ALAM4004 4 4 1 19.2 288 384 1017
ALAM6008 ALAM5008 ALAM1008 ALAM4008 8 4 2 19.2 288 384 1018
ALAM6024 ALAM5024 ALAM1024 ALAM4024 12 4 3 19.2 288 384 1018
ALAM6012 ALAM5012 ALAM1012 ALAM4012 24 4 6 19.2 288 384 1019
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 38
HYBRID O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel - Copper pair along with Loose Tubes Stranded around Steel Central Strength Member - Interstices filled with Gel - Core Wrap - Peripheral Strength Members -Aluminum Moisture Barrier Tape- Polyethylene Outer Jacket
DESCRIPTION
MEFC offers a robust, highly reliable cable solution for a wide range of demanding outside plant applications, including direct buried and Rocky terrain. The Cable consists of Fibers with Insulated copper pair, insulated with Polyethylene Jacket
APPLICATIONS- Enables alternate communication - Moisture Resistant - Junction Communication System, Subscriber Network System
FEATURES AND BENEFITS
Applicable for remote stations- where distribution of power cables are difficult
Excellent Chemical Resistant outer cable jacket for Inside/Outside Plant Environment
Composite cable can be utilized for both applications in power and data applications.
Supports all grade of single mode and multi mode fibers.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
AHBM6004 AHBM5004 AHBM1004 AAMM4004 4 4 1 12.1 121 242 167
AHBM6008 AHBM5008 AHBM1008 AAMM4008 8 4 2 12.1 121 242 168
AHBM6024 AHBM5024 AHBM1024 AAMM4024 12 4 3 12.1 121 242 169
AHBM6012 AHBM5012 AHBM1012 AAMM4012 24 4 6 12.1 121 242 171
AHBM6036 AHBM5036 AHBM1036 AAMM4036 36 6 6 13.7 137 374 209
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 39
FIRE RESISTANT O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel and Wrapped with Mica Tape - Stranded around Steel Central Strength Member - Core Wrap with Water Blocking Mica Tape - Low Smoke Zero Halogen Inner Sheath -Steel Wire Braided - Mica Tape Low Smoke Zero Halogen Outer Jacket
DESCRIPTION
MEFC offers special type of Fire resistant cables for application in Oil and Gas Industries and other Petrochemical industries for higher resistance. This Core is wrapped with mica tape, which is having excellent characteristics of fire resistance. All MEFC fire resistant cable is approved by third part certifications.
APPLICATIONS- Halogen Free, High Resistance to ignition - Low Heath of Combustion - Low Toxic and corrosive gas emission, Control, Alarm Systems, Data, Video Transmission
FEATURES AND BENEFITS
High temperature and Explosive Environments
Extra heavy duty compressive strength
Halogen free, less toxic and hazardous when exposed fire.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
AFRM6004 AFRM5004 AFRM1004 AFRM4004 4 4 4 16.1 241 322 355
AFRM6008 AFRM5008 AFRM1008 AFRM4008 8 4 4 16.1 241 322 357
AFRM6024 AFRM5024 AFRM1024 AFRM4024 12 4 4 16.1 241 322 359
AFRM6012 AFRM5012 AFRM1012 AFRM4012 24 4 4 16.1 241 322 362
AFRM6036 AFRM5036 AFRM1036 AFRM4036 36 6 6 17.3 259 346 406
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 40
ADSS AERIAL O.F. CABLE
CABLE CONSTRUCTION
Loose Tubes filled with Gel - Stranded around Central Strength Member - Interstices filled with Gel - Core Wrap - Polyethylene Inner Sheath - Peripheral Strength Members - Polyethylene Outer Jacket
DESCRIPTION
MEFC ADSS O.F. Cables are solution for high performance aerial environments including power transmission and distribution networks, All Dielectric construction reduces installation costs, by avoiding the need for expensive cable shielding and grounding.
APPLICATIONS- Aerial Installation - Lightening Protection - Junction Communication System, Subscriber Network System
FEATURES AND BENEFITS Supports all grades of single and multimode fibers.Cable round Profile minimizes wind loading and tensile and ice loading.(Reducing cable sag and tensile force.All Dielectric loose tube design in immune to Electro Magnetic Interface.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 5000 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
AALN6004 AALN5004 AALN1004 AALN4004 4 4 1 14.4 144 288 165
AALN6008 AALN5008 AALN1008 AALN4008 8 4 2 14.4 144 288 166
AALN6024 AALN5024 AALN1024 AALN4024 12 4 3 14.4 144 288 166
AALN6012 AALN5012 AALN1012 AALN4012 24 4 6 14.4 144 288 168
AALN6036 AALN5036 AALN1036 AALN4036 36 6 6 15.5 155 310 198
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 41
AERIAL FIG 8 O.F. CABLE (METTALLIC)
CABLE CONSTRUCTION
Loose Tubes filled with Gel - Stranded around Central Strength Member - Core Wrap - Polyethylene Inner Sheath - Water Blocking Material - Corrugated Steel Tape Armour- Messenger Wire embedded Polyethylene Outer Jacket
DESCRIPTION
MEFC Fig 8 Cables are self-supporting cables designed for aerial installation. The Cable design provides easy and economical one- step Installation and Stable performance over a wide temperature range. The Whole tensile load is borne by steel messenger wire.
APPLICATIONS- Aerial Installation - High Mechanical Strength - Data, Voice, Video Transmission
FEATURES AND BENEFITS
Small Diameter and Light Weight
Double Jacket single armor construction provides additional crush and mechanical Protection.
Compatible for any telecommunication grade optical fiber.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted(G.652)
SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outer dia
(MM) NOLOAD
UNDER
LOAD (Kg/km)
AALM6004 AALM5004 AALM1004 AALM4004 4 2 2 23.5x13.2 132 264 323
AALM6008 AALM5008 AALM1008 AALM4008 8 2 4 23.5x13.2 132 264 324
AALM6024 AALM5024 AALM1024 AALM4024 12 2 6 23.5x13.2 132 264 326
AALM6012 AALM5012 AALM1012 AALM4012 24 4 6 24.7x14.2 142 284 352
AALM6036 AALM5036 AALM1036 AALM4036 36 6 6 25.9x15.6 156 312 392
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 42
AERIAL FIG 8 O.F. CABLE (ALL DIELECTRIC)
CABLE CONSTRUCTION Loose Tubes filled with Gel - Stranded around Central Strength Member - Core Wrap - Polyethylene Inner Sheath - Water Blocking Material - Messenger Wire embedded Polyethylene Outer Jacket
DESCRIPTION
MEFC Fig 8 Cables are self-supporting cables designed for aerial installation. The Cable design provides easy and economical one- step Installation and Stable performance over a wide temperature range. The Whole tensile load is borne by FRP Messenger wire.
APPLICATIONS- Aerial Installation - High Mechanical Strength - Data, Voice, Video Transmission
FEATURES AND BENEFITS Small Diameter and Light WeightDouble Jacket single armor construction provides additional crush and mechanical Protection.Compatible for any telecommunication grade optical fiber.Fiber Reinforced Plastic as a messenger wire, All Dielectric Cable Immune to Electro Magnetic Interface.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -40 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 2700 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
AALM6004 AALM5004 AALM1004 AALM4004 4 2 2 23.5x13.2 132 264 323
AALM6008 AALM5008 AALM1008 AALM4008 8 2 4 23.5x13.2 132 264 324
AALM6024 AALM5024 AALM1024 AALM4024 12 2 6 23.5x13.2 132 264 326
AALM6012 AALM5012 AALM1012 AALM4012 24 4 6 24.7x14.2 142 284 352
AALM6036 AALM5036 AALM1036 AALM4036 36 6 6 25.9x15.6 156312 392
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 43
INDOOR SIMPLEX O.F. CABLE
CABLE CONSTRUCTION 900 um Tight Buffer - Peripheral Strength Members - Riser / Plenum Orange Color Jacket.
DESCRIPTION
MEFC Simplex cables for indoor applications are flexible enough to handle easily in any interconnect or cross connect applications in the central office, equipment room. The main construction of these cables consists of flexible tight-buffered material, extended over the fibers surrounded with aramid yarns for additional protection and strength.
APPLICATIONS - Pigtail and Patch cords - Factory Automation, Inter office - Aircraft and marine systems
FEATURES AND BENEFITS
Used for Pigtails/Patch Cords in central offices, data centers etc.
Cab be directly terminated to any type of connectors.
Easier to strip and allows longer lengths of buffer to be removed in single press
Both raiser and plenum grades are available
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -10 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Natural Color
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 500 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
BSXR6001 BSXR5001 BSXR1001 BSXR4001 1 1 1 3.0 45 60 9.6
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 44
INDOOR ZIP CORD O.F. CABLE
CABLE CONSTRUCTION 900 um Tight Buffer - Peripheral Strength Members - Riser / Plenum Orange Color Jacket.
DESCRIPTION
MEFC zip cord indoor type cables are designed for two way communication, provides excellent transmission performance, flexibility and connectivity for optical network systems in a variety of installation environments. The tight buffers are colorcoded for easy Identification during termination.
APPLICATIONS - Pigtail and Patch cords - Factory Automation, Inter office - Aircraft and marine systems
FEATURES AND BENEFITS
Eases installation and space constrained area.
Ensures lower total installation costs.
Used in LAN, SAN equipment rooms.
Small size lightweight and versatile installation capability.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -10 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Natural Color
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 500 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outer dia
(MM) NOLOAD
UNDER
LOAD (Kg/km)
BZCR6002 BZCR5002 BZCR1002 BZCR4002 21 1 2 6.1x3.0 61 92 17
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 45
FLAT DUPLEX O.F. CABLE
CABLE CONSTRUCTION
900 um Tight Buffer - Peripheral Strength Members - Riser / Plenum Orange Color Jacket Two Simplex Cords - Riser / Plenum common jacket over two simplex cords
DESCRIPTION
MEFC Flat Duplex cables are designed for two-way communication, provides excellent transmission performance, flexibility and connectivity for optical network systems in a variety of installation environments. The tight buffers are color coded for easy Identification during termination.
APPLICATIONS - Pigtail and Patch cords - Factory Automation, Inter office Under Carpet
FEATURES AND BENEFITS
Eases installation and space constrained area.
Ensures lower total installation costs.
Used in LAN, SAN equipment rooms.
Small size lightweight and versatile installation capability.
Offers All grades of multi mode and single mode fibers
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -10 C to +70 C
FIBER / TUBE COLOURS: AS PER IEC 60304 Natural Color
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 500 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
BFDR6002 BFDR5002 BFDR1002 BFDR4002 2 1 2 6.6x3.8 61 99 26
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 46
INDOOR BREAKOUT O.F. CABLE
CABLE CONSTRUCTION
Sub Units with Tight Buffers and Peripheral Strength Members - Stranded around Central Strength Member - Core Wrap Orange Color Jacket
DESCRIPTION
MEFC Indoor Breakout Cable provides excellent transmission performance, flexibility and connectivity for optical network systems in a variety of installation environments.
APPLICATIONS - LAN, CCTV -Direct Termination of Fibers -Plenum and Riser
FEATURES AND BENEFITS
Eases installation and space constrained area.
Ensures lower total installation costs.
LSZH Low smoke halogen out jacket protects fibers from flame
Small size lightweight and versatile installation capability.
Reduce smoke emissions and flame spreading.
Both raiser and plenum grades are available
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -10 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, AquaTesting Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 1000 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
BBOR6024 BBOR5024 BBOR1024 BBOR4024 24 6 4 15.1 226 302 191
BBOR6036 BBOR5036 BBOR1036 BBOR4036 36 6 6 18.1 271 362 282
BBOR6048 BBOR5048 BBOR1048 BBOR4048 48 8 6 21.1 316 422 325
BBOR6072 BBOR5072 BBOR1072 BBOR4072 72 12 6 22.0 330 440 400
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 47
INDOOR BACKBONE O.F. CABLE
CABLE CONSTRUCTION
Sub Units with Tight Buffers and Peripheral Strength Members - Stranded around Central Strength Member - Core Wrap Orange Color Jacket
DESCRIPTION
MEFC Indoor backbone Cable provides excellent transmission performance, flexibility and connectivity for optical network systems in a variety of installation environments.
APPLICATIONS- Intrabuilding Local Area Network - Data, Voice, Video Transmission CATV
FEATURES AND BENEFITS Eases installation and space constrained area.Ensures lower total installation costs.LSZH Low smoke halogen out jacket protects fibers from flameSmall size lightweight and versatile installation capability.
Reduce smoke emissions and flame spreading.
Both raiser and plenum grades are available
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -10 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, AquaTesting Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 1000 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
No. of active
Loosetubes
outerdia
(MM) NOLOAD UNDE
RLOAD
(Kg/km)
BBBN6002 BBBN5002 BBBN1002 BBBN4002 4 4 4 11.4 171 228 119
BBBN6004 BBBN5004 BBBN1004 BBBN4004 8 4 4 11.4 171 228 120
BBBN6010 BBBN5010 BBBN1010 BBBN4010 12 4 4 11.4 171 228 122
BBBN6008 BBBN5008 BBBN1008 BBBN4008 24 4 4 11.4 171 228 123
BBBN6012 BBBN5012 BBBN1012 BBBN4012 36 6 6 11.4 171 228 124
BBBN6072 BBBN5072 BBBN1072 BBBN4072 48 8 8 21.7 325 434 396
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 48
INDOOR DISTRIBUTION O.F. CABLE
CABLE CONSTRUCTION
Tight Buffers surrounded by Peripheral Strength Members - Orange Color Jacket
DESCRIPTION
MEFC Indoor distribution cables dry core, which is available both plenum and rise grade, The peripheral strength members mostly aramid yarns provide excellent tensile load for cable.
APPLICATIONS- LAN, CCTV Direct termination of fibers - Plenum and Riser
FEATURES AND BENEFITS
Flexible light weight.
Eases installation and space constrained areas.
Ensures lower total installation costs.
Used in LAN, SAN equipment rooms.
Offers all grades of multi mode and single mode fibers.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature : -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature : -10 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Blue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Violet, Pink, AquaTesting Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension : 500 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
Fiberper
Loosetube
outer dia
(MM) NOLOAD
UNDER
LOAD (Kg/km)
BDBN6002 BDBN5002 BDBN1002 BDBN4002 2 2 3.1 47 62 8.3
BDBN6004 BDBN5004 BDBN1004 BDBN4004 4 4 6.1 91 122 35
BDBN6010 BDBN5010 BDBN1010 BDBN4010 6 6 7.0 105 140 42
BDBN6008 BDBN5008 BDBN1008 BDBN4008 8 8 7.0 105 140 44
BDBN6012 BDBN5012 BDBN1012 BDBN4012 10 10 9.0 135 180 57
BDBN6072 BDBN5072 BDBN1072 BDBN4072 12 12 9.0 135 180 59
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 49
INDOOR OUTDOOR DRY O.F. CABLE (TIGHT BUFFER TYPE)
CABLE CONSTRUCTION
Sub Units with Tight Buffers and Water Blocking Yarns - Stranded around Central Strength Member - Core Wrap Peripheral Strength Members UV Resistant LSZH Outer Jacket
DESCRIPTION
MEFC Indoor /Outdoor cable is the most suitable with Indoor and Outdoor applications. In campus type environment with many building-to-building, MEFC cables can be used in conduits and connected to inside building with any splice termination.
APPLICATIONS- Inter office trunking Data, Voice, Video Transmission Control Alarm System
FEATURES AND BENEFITS
Avoids splicing and connecting between Indoor and Outdoor Multi Applications..
Light weight and flexible.
Both raiser and plenum grades are available
Offers all grades of multi mode and single mode fibers.
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature: -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -10 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Tight Buffer Colors: Blue, Orange, SUB UNIT COLORS Green, Brown, Gray, White Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 1000 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
TightBuffer
PerSubUnit
No.OfActive Sub
Units
Outer Dia
(MM)NO
LOAD UNDE
RLOAD
(Kg/km)
IDUN6004-Y IDUN5004-Y IDUN1004-Y IDUN4004-Y 4 2 2 14.8 222 296 177
IDUN6008-Y IDUN5008-Y IDUN1008-Y IDUN4008-Y 8 2 4 14.8 222 296 178
IDUN6012-Y IDUN5012-Y IDUN1012-Y IDUN4012-Y 12 2 6 14.8 222 296 179
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 50
INDOOR OUTDOOR ARMORED O.F. CABLE
CABLE CONSTRUCTION
Tight Buffered Simplex Cords - Stranded around Central Strength Member - Core Wrap Flame Retardant Inner Sheath Corrugated Steel Tape Flame Retardant Outer Jacket
DESCRIPTION
MEFC Indoor /Outdoor armored cable offers excellent tensile strength for both Indoor and Outdoor applications. Suitable for building-to-building short distance inter connected applications. MEFC Indoor /Outdoor armored cable offers excellent resistance for rodent attacks.
APPLICATIONS- Rorent Resistant Indoor and Outdoor Installation Direct Buried Insatallation
FEATURES AND BENEFITS
Avoids splicing and connecting between Indoor and Outdoor Multi Applications..
Light weight and flexible.
Both raiser and plenum grades are available
Supports all grades of multi mode and single mode fibers.
Rodent resistant
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: Industry Standard Storage Temperature: -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -10 C to +70 C FIBER / TUBE COLOURS: AS PER IEC 60304 Tight Buffer Colors: Blue, Orange, SUB UNIT COLORS Green, Brown, Gray, White Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 2000 Newton
CABLE CODE Min.BendingRadius(MMNet
Weight
MM 50/125NM (G.651)
MM 50/125NM (G.651)
SM DISP. unshifted
(G.652)SMNZDS(G.655)
Fiber
count
TightBuffer
PerSubUnit
No.OfActive Sub
Units
Outer Dia
(MM)NO
LOAD UNDE
RLOAD
(Kg/km)
IAMM6004 IAMM5004 IAMM1004 IAMM4004 4 1 1 17.4 261 348 274
IAMM6008 IAMM5008 IAMM1008 IAMM4008 8 2 4 17.4 261 348 275
IAMM6012 IAMM5012 IAMM1012 IAMM4012 12 2 6 17.4 261 348 277
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 51
DUCT NON METALLIC O.F. CABLE SAUDI ARAMCO
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: 18-SAMSS-625 (Saudi Aramco) Storage Temperature: -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -40 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 2700 Newton
ORDERING INFORMATION
DUCT BURIED NON METALLIC O.F. CABLE SAUDI ARAMCO
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: 18-SAMSS-625 (Saudi Aramco) Storage Temperature: -40 C to +70 C Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -40 C to +70 C Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 2700 Newton
ORDERING INFORMATION
* Fiber Type 1. Single Mode Dispersion Unshifted Fiber (Matched Clad) 2. Single Mode Dispersion Unshifted Fiber (Depressed Clad) 3. Single Mode Dispersion Shifted Fiber 4. Single Mode NonZero Dispersion shifted Fiber 5. MM 62.5/125nm 6. MM 50/125 nm
A DU N A
Outdoor DuctNon Metallic * Fiber Type * Fiber Count
A DB N A
Outdoor Direct BuriedNon Metallic * Fiber Type * Fiber Count
Aramco
Aramco
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 52
STEEL TABLE ARMORED DOUBLE SHEATH O.F. CABLE SAUDI ARAMCO
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: 18-SAMSS-625 (Saudi Aramco) Storage Temperature: -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -40 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 2700 Newton
ORDERING INFORMATION
INDOOR BACKBONE O.F. CABLE SAUDI ARAMCO
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: 18-SAMSS-625 (Saudi Aramco) Storage Temperature: -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -40 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 1000 Newton
ORDERING INFORMATION
* Fiber Type 1. Single Mode Dispersion Unshifted Fiber (Matched Clad) 2. Single Mode Dispersion Unshifted Fiber (Depressed Clad) 3. Single Mode Dispersion Shifted Fiber 4. Single Mode NonZero Dispersion shifted Fiber 5. MM 62.5/125nm 6. MM 50/125 nm
A AM M A
Outdoor ArmoredMetallic * Fiber Type * Fiber Count
B BB P A
Indoor Backbone* Fiber Type * Fiber Count
Aramco
Aramco
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 53
DUCT NON METALLIC O.F. CABLE SCECO EAST
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: 11-SMSS-625 (SCECO EAST) Storage Temperature: -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -40 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 2700 Newton
ORDERING INFORMATION
DIRECT BURIED NON METALLIC O.F. CABLE SCECO EAST
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: 18-SAMSS-625 (Saudi Aramco) Storage Temperature: -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -40 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 1000 Newton
ORDERING INFORMATION
* Fiber Type 1. Single Mode Dispersion Unshifted Fiber (Matched Clad) 2. Single Mode Dispersion Unshifted Fiber (Depressed Clad) 3. Single Mode Dispersion Shifted Fiber 4. Single Mode NonZero Dispersion shifted Fiber 5. MM 62.5/125nm 6. MM 50/125 nm
A D N E
Outdoor DuctNon-Metallic * Fiber Type * Fiber Count
A DB N A
Outdoor Direct Buried* Fiber Type * Fiber Count
SCECO-EAST
Non-Metallic SCECO-EAST
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 54
DUCT METALLIC O.F. CABLE - SAUDI TELECOM (STC)
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: MAT-1601 (STC) Storage Temperature: -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -10 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 2000 Newton
ORDERING INFORMATION
DIRECT BURIED METALLIC O.F. CABLE - SAUDI TELECOM (STC)
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: MAT-1601 (STC) Storage Temperature: -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -10 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 2000 Newton
ORDERING INFORMATION
* Fiber Type 1. Single Mode Dispersion Unshifted Fiber (Matched Clad) 2. Single Mode Dispersion Unshifted Fiber (Depressed Clad) 3. Single Mode Dispersion Shifted Fiber 4. Single Mode NonZero Dispersion shifted Fiber 5. MM 62.5/125nm 6. MM 50/125 nm
A D M S
Outdoor DuctMetallic * Fiber Type * Fiber Count
A DB M S
Outdoor Direct Buried* Fiber Type * Fiber Count
STC
Metallic STC
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 55
INDOOR BREAK OUT O.F. CABLE SAUDI TELECOM (STC)
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: MAT-1602 (STC) Storage Temperature: -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -10 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 1000 Newton
ORDERING INFORMATION
INDOOR DISTRIBUTION O.F. CABLE SAUDI TELECOM (STC)
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: MAT-1602 (STC) Storage Temperature: -10 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -10 C to +70 C
Testing Procedures : IEC-60794-1 (or) EIA/TIA-455 Max Pulling Tension: 500 Newton
ORDERING INFORMATION
* Fiber Type 1. Single Mode Dispersion Unshifted Fiber (Matched Clad) 2. Single Mode Dispersion Unshifted Fiber (Depressed Clad) 3. Single Mode Dispersion Shifted Fiber 4. Single Mode NonZero Dispersion shifted Fiber 5. MM 62.5/125nm 6. MM 50/125 nm
B BO L S
Indoor BreakoutLoose tube type * Fiber Type * Fiber Count
B DB N S
Indoor Direct Buried* Fiber Type * Fiber Count
STC
Non-Metallic STC
CONTENTS
AdministratorCONTENTS
MIDDLE EAST FIBER CABLE MANUFACTURING CO.(MEFC)
Middle East Fiber Cable Mfg.Co.Ltd, Second Industrial Area, P.O.Box: 733, Riyadh 11383, Kingdom of Saudi Arabia Tel: +966-1-265-0777, Fax: +966-1-265-0203, Website: http://www.mefcf.com/, E-mail: [email protected] 56
DIRECT BURIED NON METALLIC O.F. CABLE-SCECO CENTRAL
STANDARDS PERFORMANCE CHARACTERISTICS Reference Standards: TS-16.27 (SCECO-CENTRAL) Storage Temperature: -40 C to +70 C
Fiber Specifications : Refer Page nos : 44-45 Operating Temperature: -40 C to +70 C