Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
320x240px on 3.5” (70 x 53 mm) actual usable screen surface12-45 VDC or 16-32 VAC≈1W at 100% / ≈0.5W at 40% display brightness0 to +50 °C, IP class 20NTC10Modbus master or slave. Selectable parity, number of data- and stopbits.Speed up to 115 200 bps; autodetect for slave, configurable for master.
Technical featuresDimensions & resolution: Operating voltage:Power consumption:Operating temperature & IP-Class:On-board temperature sensor:Communication:
Local control and consultingThe primary usage of the multiDISPLAY is as room panel in hotels, hospitals, flats and villa’s. However, the embedded Modbus capabilities and powerfull processor enable the multiDISPLAY to also be used as an operating terminal for other applications; connect the multiDISPLAY to one of our multi24 modules, straight to one of our FX-controllers or to any other device or system using serial Modbus communication. Mount the multiDISPLAY into a standard pattress box, and instantly make your project look better thanks to the 100% customisable user interface you can create for the multiDISPLAY with our free editor. You can add your company’s or the property owner’s logo to the freely editable graphics you make for the multiDISPLAY to give it a unique look and feel. You have total control over every pixel and page.The Modbus master or slave mode enables the display to be used with literally any Modbus RTU device.
100% freely programmable5 built-in time schedules 250 internal variables / valuesCan be Modbus master or slave Modbus RTU communication (RS485)Integrated temperature sensor (NTC10)
multiDISPLAY3.5” Modbus touch screen (room or device panel)
www.fidelix.com
FX-RP-A encasingside view
screen brightness, sensitivity and rotation of the multiDISPLAY. Here you will also find the 5 built-in time schedules.
Settings: To navigate to the settings page, press the multiDISPLAY in one spot for 10 seconds. On this page, you can adjust date and time, the Modbus address,
PCB back side
FX-RP-A encasing back side
FX-RP-B encasingside view
PCB front (with touch screen glass)
FX-RP-B encasing back side
84 m
m
35 mm
84 m
m
19 mm
50 m
m
26 mm
16 mm
1 2 3 4
DC/
AC in
GN
DM
odbu
s A
Mod
bus
B
RUN
RxDTxD
Usa
ble
disp
lay
surf
ace
53 mm
70 mm
64 mm
Dis
play
gla
ss
71 mm
5.5 mm
3.5 mm
3.5 mm 3.5 mm
77 mm
7.5 mm
PCB
NTC10
μSD
60 x 60 mm
17 mm 14 mm
84 x 84 mm
50 x 50 mm
80 x 80 mm
60 x 60 mm
20 mm 12 mm
1 2 3 4
DC/
AC in
GN
DM
odbu
s A
Mod
bus
B
RUN
RxDTxD
Usa
ble
disp
lay
surf
ace
53 mm
70 mm
64 mm
Dis
play
gla
ss
71 mm
5.5 mm
3.5 mm
3.5 mm 3.5 mm
77 mm
7.5 mm
PCB
NTC10
μSD
60 x 60 mm
17 mm 14 mm
84 x 84 mm
50 x 50 mm
80 x 80 mm
60 x 60 mm
20 mm 12 mm
1 2 3 4
DC/
AC in
GN
DM
odbu
s A
Mod
bus
B
RUN
RxDTxD
Usa
ble
disp
lay
surf
ace
53 mm
70 mm
64 mm
Dis
play
gla
ss
71 mm
5.5 mm
3.5 mm
3.5 mm 3.5 mm
77 mm
7.5 mm
PCB
NTC10
μSD
60 x 60 mm
17 mm 14 mm
84 x 84 mm
50 x 50 mm
80 x 80 mm
60 x 60 mm
20 mm 12 mm
1 2 3 4
DC/
AC in
GN
DM
odbu
s A
Mod
bus
B
RUN
RxDTxD
Usa
ble
disp
lay
surf
ace
53 mm
70 mm
64 mm
Dis
play
gla
ss
71 mm
5.5 mm
3.5 mm
3.5 mm 3.5 mm
77 mm
7.5 mm
PCB
NTC10
μSD
60 x 60 mm
17 mm 14 mm
84 x 84 mm
50 x 50 mm
80 x 80 mm
60 x 60 mm
20 mm 12 mm