Find your niche

VERSATILE AND MODERN

BEFORE YOU ASSEMBLE:• Place all parts on a clean, smooth surface to avoid scratching the parts• Check to be sure you have all parts and hardware• Remove all wrapping materials, including any staples & packing straps• Keep all hardware, small parts and packaging out of reach of children• Fit will be snug, you may need a rubber mallet• You will need two people for assembly

ASSEMBLY INSTRUCTIONS

IN THE BOX:

A: Table Top (2)

B: Legs (2)

C: Stringer D: Brackets (2) E: Glides (4)

A

C

E

E

D

B

B

CONFERENCE TABLE NCT8442 NCT6834

Find your niche

VERSATILE AND MODERN

CONFERENCE TABLE NCT8442 NCT6834

ASSEMBLY INSTRUCTIONS

STEP 1

STEP 3

With the Table Top Pieces (A) laying face down, line up pins with their coordinating holes and press together in to place.

Attach Brackets (D) to the assembled Table Top (A) by lining up EClips with their coordinating holes pressing down in to place, and then tapping towards the center of the table. See Figure 1 for details.

Note: Fit will be snug, you may need to tap in to place with a rubber mallet. Use two people to flip the table over once assembled.

Note: You may need to tap in to place with a rubber mallet.Note: You may need to tap in to place with a rubber mallet.

A

D

C

B B

EE

DD

A

A

A

C

STEP 2

STEP 4

Attach Stringer (C) by lining up EClips with coordinating holes on the assembled Table Top (A), pressing down and over in to place. See Figure 2 for details.

Figure 2

Attach both Legs (B) by lining up holes with coordinating EClips on the sides of the Stringer (C) and lining up pins with coordinating holes on the Table Top (A). Press downward to lock into place.Finally, insert Glides (E) into predrilled holes on bottom of both Legs (B).

A

C

A

Figure 1

D

A