Upload
ledan
View
216
Download
3
Embed Size (px)
Citation preview
FIXTURES | DESIGN | INSTALLATION
California Baptist University
Welcome and Thank You for giving us the opportunity to participate in your success. Whether you are about to embark on a brand new retailing project or are committed to raising your current space to new standards, our desire is to provide you with the best possible solutions, in a timely matter, at remarkable prices.
For over 25 years Space Design & Display has been working with retailers and manufacturers in multiple industries, to showcase and present their products and services in a better light. From smaller, individual accounts to multi-store chains, we take great pride in our personal, attentive service.
Although this book offers many options and a host of merchandising options, it is in no way complete. Many of our solutions involve custom applications or designs. Cabinet work, metal fabrication and acrylic options are our specialty. If for any reason the products in this catalog do not meet your specifications, we will gladly explore other sources. Our goal is finding creative solutions to maximizing the potential of your space in order to highlight your products.
I have been blessed enormously through the years with a loyal customer base, exciting and interesting projects and a dedicated staff willing to out perform my expectations. By all means, challenge us with your venture. We will strive to exceed your standards.
Happy Retailing,
Brian Nelson
President, Space Design & Display
Message from the President
Some of Our Valued Customers
Pharmaceutical
Book Stores
Educational
Party Stores
Beauty Supply
Convenience
Pet Stores
Power Sports
Rental
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 3
Gondola Units ........................................ 4-6
Shelves........................................................7
End Caps ....................................................8
Accessories .......................................... 9-11
Pharmacy ........................................... 12-14
Hooks .................................................. 15-16
Slatwall .....................................................17
Med Pusher System ................................. 18
Showcases & Cash Wraps ...................... 19
Table of Contents
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 4
Gondola UnitsFEATURES• Heavy duty 12 gauge uprights roll-formed to close tolerances
and single slotted 1-1/4” on center. Each shelf bracket has its own slot
• 2-1/2” upright meets all load requirements for gondola and wallcases thru 12,000 inch lbs
• 4 positions shelves, to allow for many merchandising layouts• I-Beam design center base arms-with high strength steel hooks• Heavy duty 16 gauge cold rolled steel top caps and cross ties• 20 gauge cold rolled steel base guard protects the fixture from
damage. A customer safety feature• Electrical knock-out or hole on most components for ease in
wiring• Optional bumper guards contoured on end bases for
customer protection• Gondolas are used with a starter and add-on concept. Any
section of a tandem run can be isolated as a free standing module with the addition of end bottom arms, or inserted into other modular positions
Streater is a tough quality production fixture company. Streater store fixtures are designed to display merchandise to its best advantage and are used in leading retail stores throughout the country.
Width 30” - 36” or 48”
Height 38”- 96”
Depth 12” - 28”
Backs Solid, Pegboard, Perf & Groove or Slatwall
Colors 5 Standard and 9 Optional
Shelving 4 Position Shelving 10”- 28” Depth
AVAILABLE SIZES
FEATURES• Gondola components engineered of materials and finishes
that complement varying retail styles• Features high tensile steel uprights slotted one inch on
center for convenient shelf placement • Built in levelers and snap-together parts make installation
simple at the same time yielding an exceptional load capacity
• Shelves are strong and versatile with multi- position steel brackets to allow for multiple merchandising arrangements.
• Perforated shelving to accept all standard shelf accessories such as binning and wire dividers
Width 24”, 30”, 36” or 48”
Height 36” - 96”
Depth 13”- 31”
Backs Solid, Pegboard, Mirrored or Slat-wall
Colors 1 Standard, 16 Optional
Lozier is a leading manufacturer of store fixtures for both national and international markets. Lozier offers an extensive product line of front room and back room products. Many accessories are available to support a variety of retailing formats. We stock a large inventory of basic and complimentary items.
AVAILABLE SIZES
®
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 5
Gondola Units
Open Back Full Gondola Kit Open Back Half Gondola & Wallcase Kit
Width 30”, 36” or 48”
Height 51”, 56”, 61”, 71” or & 38” Avail.
Depth 12”, 14”,16”, 18”, 20”, 22”, 24” or 28”
Note Order 2 back panels per module
AVAILABLE SIZES
Width 30”, 36” or 48”
Height 51”, 56”, 61”, 71”, 86”, 96” or & 38” Avail.
Depth 12”, 14”,16”, 18”, 20”, 22”, 24” or 28”
Note Order 1 back panel per module
AVAILABLE SIZES
Width 24”, 30”, 36” or 48”
Height 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78” 84”, 90” or 96”
Depth 13”, 16”,19”, 22”, 25”, 28”, or 31”
Note Backs included in kit
AVAILABLE SIZES
Width 24”, 30”, 36” or 48”
Height 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96” 108”, or 120”
Note Backs included in kit
AVAILABLE SIZES
Back Panels
Solid Painted Back Panel
• 1/4” hardboard material
Painted Perforated Back Panel
• ¼” hardboard material• ¼” perforations spaced 1” on center
Perf Grooved Painted Back Panel
• 1/4” hardboard material• 1/4” perforations, 1” on center in grooved rows spaced 2” on center
Slatwall Back Panel
• ¾” MDF Material• Grooves 3” on center• Must use slatwall tie bar in place of standard tie bar• Available in painted or plastic laminated surface
Slatwall Back Panel with Metal Inserts
• ¾” MDF Material• Grooves 3” on center• Must use slatwall tie bar in place of standard tie bar• Available in painted or plastic laminated surface• Painted aluminum inserts
®
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 6
Full Gondola Starter Kit
Full Gondola Add-on Kit
Full Gondola Starter Parts
End Standards (2)
Pair End Bottom Arms (2)
Cross Tie (1)
Tie Bar (1)
Top Cap (1)
Base Deck (2)
Floating Kickplates (2)
Add-on Full Gondola Kit PartsCenter Standard (1)
Center Bottom Arms (2)
Cross Tie (1)
Tie Bar (1)
Top Cap (1)
Base Deck (2)
Floating Kickplates (2)
1
3
5a
6
7
8
9
2
4
6
7
5a
9
8One starter kit is required per gondola run.
One Basic Upright
Two Base Shoes
One Upright Cap
Two Pair Base End Covers
Two Upright End Covers
A
B
C
D
E
Gondola Section
Gondola EndsOne Gondola End is required to complete any length Gondola run…each Gondola End consist of:
Gondola Sections
Each Gondola Section locks to the adjacent section for any length Gondola run….each section consist of:
Two Kickplates
Two style Base Shelves
Two backs, MM, PP or MP …two piece backs at 78” and above
One Top Rail
One Center Rail from 42” up to 96”
Plus one SS Splicer Rail at 78” and above
One Bottom Rail
One Basic Upright
Two Base Shoes
One Upright Cap
F
G
H
I
J
K
L
M
Gondola EndN
Gondola Units – Exploded View
®
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 7
TL Two Position
7” 36” or 48” 300 lbs. 250 lbs. 125 lbs.
10” 36” or 48” 500 lbs. 250 lbs. 250 lbs.
13” 36” or 48” 500 lbs. 250 lbs. 250 lbs.
15” 36” or 48” 500 lbs. 250 lbs. 250 lbs.
16” 36” or 48” 500 lbs. 250 lbs. 250 lbs.
17” 36” or 48” 500 lbs. 250 lbs. 250 lbs.
DL Four Position
19” 36” or 48” 500 lbs. 250 lbs. 250 lbs.
20” 36” or 48” 500 lbs. 250 lbs. 125 lbs.
22” 36” or 48” 500 lbs. 250 lbs. 125 lbs.
25” 36” or 48” 400 lbs. 200 lbs. 125 lbs.
28” 36” or 48” 400 lbs. 200 lbs. 100 lbs.
31” 36” or 48” 400 lbs. 200 lbs. 100 lbs.
AVAILABLE SIZESLozier Standard Upper Shelves• Sleek, slim bracket designed for maximum merchandise visibility• 1 ¼” tag moulding integrally formed into the front edge of shelf surface
Available in TL - Two Position and DL - Four Position. All parts available in HL - Heavy Duty material that supports up to 700 lbs.
DEPTH WIDTHLOAD CAPACITY
17°FLAT 30° (PL Only)
Standard Shelf Features• Adjustable to four positions, maximizing
merchandising capabilities, 12 degree up, flat, 15 or 30 degree down
• One piece shelf pan with 1 ¼” ticket moulding• Attractive ½” on center diamond shaped
perforations accept all standard merchandising accessories such as fencing and dividers
• Textured metal finish is exeptionally durable while easier to clean and maintain
Heavy Duty 2-Position Shelf
Stan-dard Shelf Sizes
8” 350 lbs. 400 lbs. 400 lbs.
10” 350 lbs. 400 lbs. 400 lbs.
12” 500 lbs. 500 lbs. 500 lbs.
14” 500 lbs. 500 lbs. 500 lbs.
16” 500 lbs. 500 lbs. 500 lbs.
18” 500 lbs. 500 lbs. 500 lbs.
20” 400 lbs. 400 lbs.
22” 350 lbs. 350 lbs.
Heavy-Duty Shelf Sizes
20” 600 lbs. 600 lbs.
22” 600 lbs. 600 lbs.
24” 600 lbs. 600 lbs.
28” 600 lbs. 600 lbs.
DEPTH
AVAILABLE SIZES LOAD CAPACITY36”30” 48”
Steel Product Retainer
Load capacities listed represent the maximum evenly distributed weight that is recommended for each shelf. Reduce capacities shown by 30% if only the front half of the shelf is to be loaded
• Adjustable 2 position shelf, level and 20 degree downslant
• 1” high steel installs into front row of perforations on shelf
Shelves
®
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 8
Feature End Frame
End displayers - Ideal for promotional use at the end of a Gondola run
• Used at end of run with or without contour end base
• Shipped assembled with one or two back panels- order separately
• Kit includes t-brace and fasteners
Width 30”, 36” or 48”
Height 51”, 56”, 61”, 66”, 71” or 86”
Weight Limit
Total weight carried not to exceed 800 lbs.
No single shelf to carry more than 350 lbs. evenly distrib-uted pounds
AVAILABLE SIZES - END FRAME
Half Gondola End Cap
Contour End Base• Used at end of run• Shipped assembled• Order levelers or casters separately
Width 26” to 46”
Height 12”, 14”, 16”, 18” or 24”
Note Widths fit 12” thru 28” bases both sides
AVAILABLE SIZES - END BASE
• Half gondola can be used as end cap by adding a flush base and back panel to reverse side
• Used at end of gondola run• ½ gondola may also be used
at end of Gondola
Width 24”, 30”, 36”, 42” or 48”
Height 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90” or 96”
Wall End DisplayMerch Panel & Contour End Display
End Caps
®
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 9
Convert your unused space into sales space! Extender Kits For Existing Wallcase and Gondola
Starter Add-on
• ¾” MDF, painted 1 face • T-Slots 3” o.c.• Delete tie bar from extender kit
and replace with slatwall tie bar
Solid back• ¼” hardboard, painted 1 face
baked enamel• Includes H-channel
• ¼” hardboard, painted 1 face slatwall
Slatwall
Extender Back Kits for Existing Wallcase and Gondola
Extention Uprights
Width Order 1 center spanner for 6” thru 36”
Order 2 center spanners for 48” or larger
Height 6”, 12”, 18”, 24”, 30”, 36” 42”, 48” or 54”
Extention upright
• Trim off extension uprights at end of unit runsExtention upright end
covers
36 or 48spanner
Order backs to match height and width of extender
• Each starter kit contains 2 end extender standards and a tie bar (5” extender kit does not contain tie bar)
• Each add-on kit contains 2 end extender standards with hardware for assembling and a tie bar
• Order back panel separately (see below)
Width 30”, 36” or 48”
Height 5”, 10”, 15” or 25”
Perforated back
Accessories
®
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 10
• Chrome plated rod in 30”, 36” and 48” lengths • Brackets available in 12” and 14” depths
Cross Bar
full, straight half, profile half, straight
• Available in different depths allowing for a tiered display • Use crossbar hooks and accessories see page (16 ) • 48” module lengths• Depths - 1”, 3”, 6”, 8”, 9”, 12”
Wallmount Standard• Insert & double slotted• Painted standard colors. 7/8” depth• Available in 41” and 86” heights
Starter
Finish off your wall units with a colorful top valance. Top panels used for extra storage. Light fixture available.
Metal or Laminate Wood Cornice
Top Panel• Painted ¾” thick panel• Available in 3’, 4’, 6’, and 8’ lengths
Metal or Laminate Cornice Returns• Available in two telescoping ranges• 16” to 25” and 25” to 35”
Metal or Laminate Cornice Kits • Available in 3’, 4’, and 8’ sections• 8” High• Starter kit contains metal facia and 2 shelf-mount brackets
(brkts extend 7”)• Add-On kit contains metal facia and 1 shelf-mount bracket• Color Matching returns can be ordered (see below) or
color matching end panels (bottom of this page)• Order shelf separately
HangrodTelescoping Cornice Bracket
• Standard colors• Standard sizes 10”, 14”, 18”, 22”
Gondola and Wall End Panels• Half and full panels, profile and straight style• Straight panel heights 38”, 51”, 56”, 61”, 66”, 71”, 87”, 97”• Fits widths of 14” thru 28” base depths, half and full gondola• Radius and custom ends available
full, straight half, profile half, straight
Flange Brackets
Add-on
Accessories For Gondolas
• Hooks into upright, telescopes 20” to 34”• Specify left or right hand
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 11
Gondola and Wall End Panels
Accessories For Gondolas
Shelf Fencing and Dividers
Wire Baskets & Dividers
• Durable chrome finish• Snaps directly into shelf perforations (specify shelf manufacturer when ordering)• Stops unwanted product movement
Height 3” High & 6” High
Length 8”, 10”, 12”, 14”, 16”, 18”, 20”, 22”, 24”
AVAILABLE SIZES
Width 30”, 36”, & 48”
Height 1”, 3” & 6” High
AVAILABLE SIZES
Fence Dividers
Front Fence
FEATURES• 8” high basket & 6” high sloped front• Several Bracket styles available • Optional lock-in dividers adjust on 1” centers• Freestanding stacking units shown at left
Width 36” or 48”
Depth 12”, 14”, 16” or 18”
AVAILABLE SIZES
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 12
• Steel construction and baked enamel finish give a solid, clean look
• Single and double sided• Spanning 5 different widths in the single and 4 in the double,
result in endless choices for laying out your work area• Cap off the ends with 15” wide melamine overlay end panels• Bottle Bays are easily assembled at your pharmacy
Bottle Bays
Width 15” (single sided only), 24”, 29”, 36” 44”
Height 85 ¼”
Depth 7 ¾” or 15”
Note Steel shelves qty 8 for single, qty 16 for double.Extra shelves order separately.
AVAILABLE SIZES
®
Flex-Rx Storage System
• Uprights constructed of 1” x 1.5” tubular steel that provides greater stability
• Locking structural components• Aisle and wall stretchers stabilize runs• Open back design• One inch spacing of shelves and smaller widths
allow excellent positioning of various packaging
Width 16.5”
Height 84”
AVAILABLE SIZES (pharmacy units)
Pharmacy shelf dividers available • Shelves two position, O degree or 12 degree
Width 16”, 32”, 36” or 48”
Depth 7¼”
AVAILABLE SIZES (shelves)
Pharmacy
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 13
Width 16”, 32”, or 48”
Height 84”
Note Hooks and shelving install without tilting, they can be repositioned fully merchandised. Additionally, pegged and shelved items can be intermixed on any size module.
Width 16”, 32”, or 48”
Height 84”
Note Unit shown includes 16” end merchandising panel and metal base decks.
Will Call Hang Bar• Will call system with bag delivery options available
Uniweb Base Deck• 7” deep and available in 16”, 32” and 48” lengths
Uniweb Shelf• 7”x16” tray system allows for random placement
of shelves. Other sizes available
• Maximum capacity units with optional decks, shelves and end panel
One-Sided Wall Assembly with Base Deck
Two-Sided Island Assembly with End Panel
Uniweb SlimLine
Two-Sided Assembly with Shelves and Decks
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 14
Waste cabinet
Drawer and half door cabinet
Printer cabinet with printer drawer
3 drawer vial/ bottle cabinet
5 drawer RX cabinet Over sink cabinet
• 24” half door specify left hand or right hand (left hand shown)
• 24”W x 38”H x 23”D• Edges prefinished w/2mm white vinyl• Includes 1 shelf• 24” adjustable shelf unit specify left hand or
right hand
• 23 15/16” width• Must be used with 30” countertop• Printer drawer is longer to allow greater
extension• Printer shelf is 22 1/2”W and 28”D
• Each drawer has 4 adjustable dividers
• Modular cabinet, size (unless otherwise noted) is 24”W x 38”H x 38”D
• 4” high by 2” deep toe kick
• White vinyl edging for front edges
• Drawers installed on 20” 100 lb load capacity glides
• Pulls on drawers and doors
• Shelves adjustable
• Counter tops constructed on 13/16” material
• Back splash 4” high 13/16” material
• Standard color frosty white, other laminates available
• Partial backs
All pricing available upon requests Pricing on optional colors also available upon request
• 4 bottom drawers divided into 3 sections with card following system
• Top drawer includes a lock
• 30”H x 28”W x 11”D• 2 adjustable shelves
Basic open cabinet• Left hand, right hand available• Optional sink available with door
Locked drawer cabinet• Includes one adjustable shelf
4 drawer accessory cabinet
Half modular cabinet• 12” wide• CPU pull-out drawer available
3 drawerlocked
narcotics• Specify
right or left opening door
• Completely closed back
Pharmacy Woodflex
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 15
• Label holder lifts up for easy product removal & fast restocking
• Works with adhesive labels or non-adhesive tags• Custom powder coated colors available• One piece construction• Label holder sold separately in 2”, 2½” & 3” lengths
FastFlip Scanning Hooks
Medium Duty
.186 Diameter
Heavy Duty .212 Diameter
R45-4-186US R45-8-212US
R45-6-186US R45-10-212US
R45-8-186US R45-12-212US
R45-10-186US
Part
#
HooksWe offer a wide variety of stock hooks but also have many non-standard and custom options available.
Standard Duty
.149 Diameter
Medium Duty
.177 Diameter
Heavy Duty .212 Diameter
R21-2-S R21-4-M R21-4-H
R21-4-S R21-6-M R21-6-H
R21-6-S R21-8-M R21-8-H
R21-8-S R21-10-M R21-10-H
R21-12-M R21-12-H
Part
#
AVAILABLE SIZES
• Fits in ¼” peg & or slatwall backs• One piece construction - use Quad-Wire, Fast
Tag, R36 or metal plate label holders
• With ball tip ends fits in 1/8” & 1/4” pegboard and slatwall except heavy duty which only works in ¼” peg or slatwall
All-Wire Scanning Hooks
All-Wire Hooks
Medium Duty
.186 Diameter
Heavy Duty .212 Diameter
R45-4-186 R45-6-212
R45-6-186 R45-8-212
R45-8-186 R45-10-212
R45-12-212
Part
#
Fast Flip Label Holder
Fast Flip Hook
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 16
Easy to install, works in ¼” peg backs and slatwall. Installs directly under
shelves and existing merchandise. Replacement backs and stems also
can be purchased separately.
Fastback® Single Stem Hooks• Number after dash represents length• Offered in qty packs, lower prices available for large
quantities• Call Space Design and Display to receive a quote!
Standard Duty.149 Diameter
Medium Duty .186 Diameter
Heavy Duty .224 Diameter
R22-2 R30-4 R23-4
R22-4 R30-6 R23-6
R22-6 R30-8 R23-8
R22-6 R30-9 R23-9
R22-8 R30-10 R23-10
R30-12 R23-12
R23-14
R22- repalcement back white
R30 replacement back beige
R23-replacement back white
Part
#
AVAILABLE SIZES
Fastback® Scanning Hooks• Variety of label holders available• Also available with metal back, call for details!
Medium Duty.186 Diameter
Heavy Duty .212 Diameter
Extra Heavy Duty
.250 Diameter
Ultra-Heavy Duty
(3 Prong Back) .250 Diameter
R33-2-186 R-4-212 R33-6-250 R34-9-250
R33-4-186 R-6-212 R33-8-250 R34-12-250
R33-6-186 R-8-212 R33-9-250 R34-14-250
R33-8-186 R-9-212 R33-10-250 R34-16-250
R-10-212 R33-12-250
R-12-212 R33-14-250
R-14-212 R33-16-250
R-16-212
R33-186-100 replace-ment back beige
R-212-200 replacement back grey
R33-250-100 replace-ment back white
R34-100 Replacement Back
Part
#
AVAILABLE SIZES
R33 Back R34 Back
Fastback® Hooks Many more hook styles available. Call for details.
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 17
Galvanized zincPurchase label holder separately3/16” x 4”, 6”, 8”, 11”
Available in chrome, black or white ¼” x 1”, 2”, 4”, 6”, 8”, 10”, 12”
Slatwall Hook Flip Scan Hook
With J hookschrome, black or white ½” x 1 ½” x 13 ½”
Other sizes available
Rectangular Slatwall Waterfall Square Slatwall WaterfallChrome, black or white ¾” x 16”
Acrylic Literature Holder
Chrome, white or black 12” x 12” x 8”
Raw MDFUnfinished
Square Slatwall Basket
Paint Grade
MANY MORE SHAPES AND SIZES AVAILABLE !
MANY MORE STYLES AVAILABLE!
Acrylic Slatwall Shelves
Low Pressure Melamine
4” x 24”, 6” x 16”
White, Grey, Black, MapleOptional color inserts
Horizontal Styles 7” x 5 ½”, 11” x 7”, 11” x 8 ½”, 14” x 11”Vertical Styles 5 ½” x 7”, 7” x 11”, 8 ½” x 11”, 11” x 14”Custom Sizes Available
Multiple color optionsStrongest surfaceMaximum weight capacity
Available in chrome, black or white6”, 8”, 10”, 12”, 14”, 16”
Slatwall Shelf Bracket
Acrylic Slatwall Sign Holders
Laminate with Metal Inserts
Slatwall
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 18
Med Pusher Shelf Management System
Med Pusher Hook System
Boost your sales and more effectively merchandise your shelving by using our Med Pusher System. Spring loaded tracks continually front face your product and always show a “full” shelf. Use this dynamic system for impeccable merchandising capabilities and give that professionally always-stocked look.
Width Fronts: 30”, 36”, or 48”Dividers: 10” or 12”
Height Fronts: 2”Dividers: 3”
Note Self-facing tracks to automatically advance products. Beige high-impact plastic front rail and dividers.Clear PETG front lens.
Height 10” & 12”
Note Available in low, medium and high strength spring.
Med Pusher System
Cabinets | Casework | Showcases
SPACE DESIGN & DISPLAY 1.951.734.2990 | 1.800.776.9527 | www.spacedd.com 19
1832 Railroad Street , Corona, CA 928801.951.734.2990 | 1.800.776.9527 | www.spacedd.com