Florida Power & Light - Cloud Object Storage | Store ... · florida power & light flagler service center table of contents brph architects-engineers, inc. c07084.006.00 toc - i division

Board of Architecture License No. AAC000149 Certificate of Authorization – Engineering 1439

Prepared for: Florida Power & Light 700 Universal Boulevard Juno Beach, FL 33408 Prepared by: BRPH Architects-Engineers, Inc. 5700 North Harbor City Boulevard, Suite 400 Melbourne, FL 32940

BRPH NO. C07084.006.00 May 16, 2016

Florida Power & Light Flagler Service Center

5910 State Highway 100 City of Palm Coast

Flagler County, Florida 32164

95% Issue for Bid

THIS PAGE INTENTIONALLY LEFT BLANK

FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER TABLE OF CONTENTS BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 TOC - i

DIVISION 00 – PROCUREMENT AND CONTRACTING REQUIREMENTS

00 01 01 Project Title Page 05-16-1600 01 07 Seals Page 05-16-1600 01 15 List of Drawing Sheets 05-16-1600 26 00 Procurement Substitution Procedures 05-16-1600 31 32 Geotechnical Data 05-16-1600 31 43 Permit Application 05-16-16 DIVISION 01 – GENERAL REQUIREMENTS

01 05 50 Project Permits 05-16-1601 05 60 Threshold Building Inspection Plan 05-16-1601 10 00 Summary 05-16-1601 12 00 Multiple Contract Summary 05-16-1601 23 00 Alternates 05-16-1601 25 00 Substitution Procedures 05-16-1601 26 00 Contract Modification Procedures 05-16-1601 29 00 Payment Procedures 05-16-1601 31 00 Project Management and Coordination 05-16-1601 32 00 Construction Progress Documentation 05-16-1601 32 33 Photographic Documentation 05-16-1601 33 00 Submittal Procedures 05-16-1601 39 00 Electronic Deliverables Release 05-16-1601 40 00 Quality Requirements 05-16-1601 42 00 References 05-16-1601 50 00 Temporary Facilities and Controls 05-16-1601 60 00 Product Requirements 05-16-1601 73 00 Execution 05-16-1601 74 19 Construction Waste Management and Disposal 05-16-1601 77 00 Closeout Procedures 05-16-1601 78 23 Operation and Maintenance Data 05-16-1601 78 39 Project Record Documents 05-16-1601 79 00 Demonstration and Training 05-16-1601 91 13 General Commissioning Requirements 05-16-16 DIVISION 02 – EXISTING CONDITIONS

SITE-RELATED SPECIFICATIONS CAN BE FOUND ON THE KHA DRAWINGS.

DIVISION 03 - CONCRETE

03 10 00 Concrete Formwork 05-16-1603 20 00 Concrete Reinforcement and Embedded Assemblies 05-16-16


C07084.006.00 TOC - ii

DIVISION 03 – CONCRETE (cont.)

03 30 00 Cast-In-Place Concrete 05-16-1603 47 13 Site-Cast Precast Concrete (Tilt-Up) Wall System 05-16-16 DIVISION 05 - METALS

05 12 00 Structural Steel 05-16-1605 21 00 Steel Joists 05-16-1605 31 00 Steel Deck 05-16-1605 51 13 Metal Pan Stairs 05-16-16 DIVISION 06 – WOOD, PLASTICS, AND COMPOSITES

06 10 00 Rough Carpentry 05-16-1606 40 23 Interior Architectural Woodwork 05-16-16 DIVISION 07 – THERMAL AND MOISTURE PROTECTION

07 13 26 Self-Adhering Sheet Waterproofing 05-16-1607 21 00 Thermal Insulation 05-16-1607 24 19.13 Exterior Insulation and Finish System (EIFS) 05-16-1607 54 23 Thermoplastic Polyolefin (TPO) Roofing 05-16-1607 71 00 Roof Specialties 05-16-1607 72 00 Roof Accessories 05-16-1607 81 00 Applied Fireproofing 05-16-1607 84 13 Penetration Firestopping 05-16-1607 84 43 Joint Firestopping 05-16-1607 92 00 Joint Sealants 05-16-16 DIVISION 08 - OPENINGS

08 11 13 Hollow Metal Doors and Frames 05-16-1608 14 16 Flush Wood Doors 05-16-1608 31 13 Access Doors and Frames 05-16-1608 33 23 Overhead Coiling Doors 05-16-1608 41 13 Aluminum-Framed Entrances and Storefronts 05-16-1608 71 00 Door Hardware 05-16-1608 80 00 Glazing 05-16-1608 91 19 Fixed Louvers 05-16-16 DIVISION 09 - FINISHES

09 22 16 Non-Structural Metal Framing 05-16-1609 29 00 Gypsum Board 05-16-1609 30 00 Wall and Floor Tiling 05-16-1609 30 00.13 Metal Edge Transition Strip for Floors and Walls 05-16-1609 51 13 Acoustical Panel Ceilings 05-16-16


C07084.006.00 TOC - iii

DIVISION 09 – FINISHES (cont.)

09 65 13 Resilient Base and Accessories 05-16-1609 65 19 Resilient Floor Tile 05-16-1609 65 36 Static-Control Resilient Flooring 05-16-1609 68 13 Tile Carpeting 05-16-1609 91 23 Interior Painting and Exterior Painting 05-16-16 DIVISION 10 - SPECIALTIES

10 14 23 Panel Signage 05-16-1610 21 13 Toilet Compartments 05-16-1610 28 00 Toilet Accessories 05-16-1610 41 16 Emergency Key Cabinets 05-16-1610 44 13 Fire Protection Cabinets 05-16-1610 44 16 Fire Extinguishers 05-16-1610 51 13 Metal Lockers 05-16-1610 75 16 Ground-Set Flagpoles 05-16-16 DIVISION 11 - EQUIPMENT

11 24 29.13 Fall Protection Safety Hook 05-16-16 DIVISION 14 – CONVEYING EQUIPMENT

14 24 00 Hydraulic Elevators 05-16-16 DIVISION 21 – FIRE PROTECTION/FIRE SUPPRESSION

FIRE PROTECTION/SUPPRESSION SPECIFICATIONS CAN BE FOUND ON THE JENSEN-HUGHES DRAWINGS.

DIVISION 22 – PLUMBING

22 05 17 Sleeves and Sleeve Seals for Plumbing Piping 05-16-1622 05 18 Escutcheons for Plumbing Piping 05-16-1622 05 19 Meters and Gages for Plumbing Piping 05-16-1622 05 23.12 Ball Valves for Plumbing Piping 05-16-1622 05 23.14 Check Valves for Plumbing Piping 05-16-1622 05 23.15 Gate Valves for Plumbing Piping 05-16-1622 05 29 Hangers and Supports for Plumbing Piping and Equipment 05-16-1622 05 53 Identification for Plumbing Piping and Equipment 05-16-1622 07 19 Plumbing Piping Insulation 05-16-1622 11 16 Domestic Water Piping 05-16-1622 11 19 Domestic Water Piping Specialties 05-16-1622 11 23 Domestic Water Pumps 05-16-1622 13 16 Sanitary Waste and Vent Piping 05-16-1622 13 19 Sanitary Waste Piping Specialties 05-16-16


C07084.006.00 TOC - iv

DIVISION 22 – PLUMBING (cont.)

22 13 19.13 Sanitary Drains 05-16-1622 33 00 Electric, Domestic-Water Heaters 05-16-1622 42 13.13 Commercial Water Closets 05-16-1622 42 13.16 Commercial Urinals 05-16-1622 42 16.13 Commercial Lavatories 05-16-1622 42 16.16 Commercial Sinks 05-16-1622 42 23 Commercial Showers 05-16-16 DIVISION 23 – HEATING, VENTILATING, AND AIR CONDITIONING

23 05 00 Basic Mechanical Requirements 05-16-1623 05 13 Common Motor Requirements for HVAC Equipment 05-16-1623 05 17 Sleeves and Sleeve Seals for HVAC Piping 05-16-1623 05 19 Meters and Gages for HVAC Piping 05-16-1623 05 29 Hangers and Supports for HVAC Piping and Equipment 05-16-1623 05 48 Vibration and Seismic Controls for HVAC Piping and

Equipment 05-16-16

23 05 53 Identification for HVAC Piping and Equipment 05-16-1623 05 93 Testing, Adjusting, and Balancing for HVAC 05-16-1623 07 13 Duct Insulation 05-16-1623 09 00 Instrumentation and Control for HVAC 05-16-1623 31 13 Metal Ducts 05-16-1623 33 00 Air Duct Accessories 05-16-1623 34 23 HVAC Power Ventilators 05-16-1623 72 13 Air Handling Units with Coils 05-16-1623 72 13.13 Air Cooled Condensing Units 05-16-1623 72 14 Dedicated Outside Air System 05-16-16 DIVISION 26 – ELECTRICAL

26 01 00 Common Work Results for Electrical 05-16-1626 05 19 Low-Voltage Electrical Power Conductors and Cables 05-16-1626 05 26 Grounding and Bonding for Electrical Systems 05-16-1626 05 29 Hangers and Supports for Electrical Systems 05-16-1626 05 33 Raceways and Boxes for Electrical Systems 05-16-1626 05 43 Underground Ducts and Utility Structures 05-16-1626 05 44 Sleeves and Sleeve Seals for Electrical Raceways and Cabling 05-16-1626 05 53 Identification for Electrical Systems 05-16-1626 05 73.13 Overcurrent Protective Device Short-Circuit Study 05-16-1626 05 73.16 Overcurrent Protective Device Coordination Study 05-16-1626 05 73.19 Overcurrent Protective Device Arc-Flash Study 05-16-1626 09 23 Lighting Control Devices 05-16-1626 22 00 Low-Voltage Transformers 05-16-1626 24 16 Panelboards 05-16-16


C07084.006.00 TOC - v

DIVISION 26 – ELECTRICAL (cont.)

26 27 26 Wiring Devices 05-16-1626 28 13 Fuses 05-16-1626 28 16 Enclosed Switches and Circuit Breakers 05-16-1626 29 23 Variable-Frequency Motor Controllers 05-16-1626 32 13 Engine Generators 05-16-1626 36 00 Transfer Switches 05-16-1626 41 13 Lightning Protection for Structures 05-16-1626 43 13 Surge Protection for Low-Voltage Electrical Power Circuits 05-16-1626 51 19 LED Interior Lighting 05-16-1626 52 19 Exit Lighting 05-16-1626 56 13 Lighting Poles and Standards 05-16-1626 56 19 LED Exterior Lighting 05-16-16 DIVISION 27 – COMMUNICATIONS

27 05 26 Grounding and Bonding for Communication Systems (to follow)27 05 28 Pathways for Communication Systems (to follow)27 05 36 Cable Trays for Communications Systems (to follow)27 05 44 Sleeves and Sleeve Seals for Communications Pathways

and Cabling (to follow)

DIVISION 28 – ELECTRONIC SAFETY AND SECURITY

FIRE ALARM SPECIFICATIONS CAN BE FOUND ON THE JENSEN-HUGHES DRAWINGS.

DIVISION 31 – EARTHWORK


DIVISION 32 – EXTERIOR IMPROVEMENTS


32 31 13.13 Interior Chain Link Fences and Gates 05-16-16 DIVISION 33 – UTILITIES


APPENDICES

Appendix A Environmental Site Assessment Report Appendix B Project Specific Requirements / Supplemental Conditions Appendix C Asbestos Report

END OF TABLE OF CONTENTS


FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER PROJECT TITLE PAGE BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 00 01 01 - 1 05-16-16

DOCUMENT 00 01 01 - PROJECT TITLE PAGE

1.1 PROJECT MANUAL VOLUME 1 – Issued for Bid

A. FP&L Flagler Service Center.

B. Florida Power & Light.

C. Flagler County, FL 32164.

D. Owner Project No. 2000168670.

E. Architect Project No. C07084.006.00.

F. BRPH Architects-Engineers, Inc.

G. 5700 N. Harbor City Blvd., Suite 400.

H. Melbourne, FL 32940.

I. Phone: 321-254-7666.

J. Fax: 321-259-4703.

K. Web Site: www.brph.com.

L. Issued: 05-16-16.

M. Copyright 2015 BRPH Architects-Engineers, Inc. All rights reserved.

END OF DOCUMENT 00 01 01


FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER SEALS PAGE BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 00 01 07 - 1 05-16-16

DOCUMENT 00 01 07 - SEALS PAGE

1.1 DESIGN PROFESSIONALS OF RECORD

A. Architect:

1. Michael Blanchard, AIA. 2. State of Florida, License No. AR0093144. 3. Responsible for Divisions 01-49 Sections except where indicated as prepared

by other design professionals of record.

B. Civil Engineer:

1. Kimley-Horn and Associates, Inc.; Michael F. Schwartz, P.E. 2. State of Florida, License No. 56200. 3. Responsible for Specifications on Drawings.

C. Landscape Architect:

1. Gentile, Glas, Holloway, O’Mahoney & Associates, Inc.; Emily O’Mahoney, P.E. 2. State of Florida, License No. LA0000684 3. Responsible for Specifications on Drawings.

D. Structural Engineer:

1. Jezerinac Group; Ronald Michael Jezerinac Jr., P.E. 2. State of Florida, License No. 1174 3. Responsible for Division 03 and Division 05 - Sections 05 12 00, 05 21 00,

and 05 31 00.

E. Fire-Protection Engineer:

1. Jensen Hughes; Hamid Bahadori, P.E. 2. State of Florida, License No. 45138. 3. Responsible for Specifications on Drawings.

F. Plumbing Engineer:

1. Jeanne Duce, P.E. 2. State of Florida, License No. 72928. 3. Responsible for Division 22.

G. HVAC Engineer:

1. Jeanne Duce, P.E. 2. State of Florida, License No. 72928. 3. Responsible for Division 23.

FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER SEALS PAGE BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 00 01 07 - 2 05-16-16

H. Electrical Engineer:

1. Luis A. Rosario, P.E. 2. State of Florida, License No. 65457. 3. Responsible for Division 26.


FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER LIST OF DRAWING SHEETS BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 00 01 15 - 1 05-16-16

DOCUMENT 00 01 15 - LIST OF DRAWING SHEETS

1.1 LIST OF DRAWINGS

A. Drawings: Drawings consist of the Contract Drawings and other drawings listed on the Table of Contents page of the separately bound drawing set titled Gulfstream Service Center Design Development, dated 11-09-15, as modified by subsequent Addenda and Contract modifications.

B. List of Drawings: Drawings consist of the following Contract Drawings and other drawings of type indicated:

INDEX OF DRAWINGS

Sheet Number

Sheet Title

G-001 COVER SHEET

G-002 ABBREVIATIONS, SYMBOLS, GENERAL NOTES

AL-100 ADA MOUNTING HEIGHTS

AL-101 LIFE SAFETY PLANS

AL-102 UL DETAILS

AL-103 UL DETAILS

A-101 FIRST FLOOR PLAN

A-102 FIRST FLOOR DIMENSION PLAN

A-103 SECOND FLOOR PLAN

A-104 SECOND FLOOR DIMENSION PLAN

A-105 FIRST FLOOR FINISH PLAN

A-106 SECOND FLOOR FINISH PLAN

A-121 FIRST FLOOR REFLECTED CEILING PLAN

A-122 SECOND FLOOR REFLECTED CEILING PLAN

A-141 ROOF PLAN

A-201 ELEVATIONS


C07084.006.00 00 01 15 - 2 05-16-16

A-301 BUILDING SECTIONS

A-310 WALL SECTIONS

A-311 WALL SECTIONS

A-390 WALL TYPES

A-401 ENLARGED PLANS

A-402 ENLARGED PLANS AND INTERIOR ELEVATIONS




A-406 ENLARGED PLANS AND ELEVATIONS

A-431 VERTICAL CIRCULATION, ENLARGED PLANS AND SECTIONS

A-432 VERTICAL CIRCULATION, SECTIONS AND DETAILS

A-501 DETAILS

A-502 ROOF DETAILS

A-503 CEILING DETAILS

A-504 DETAILS

A-601 DOOR SCHEDULE

A-602 DETAILS

A-640 FINISH SCHEDULE

A-641 FINISH LEGEND

A-700 INTERIOR SIGNAGE DETAILS

A-701 INTERIOR ELEVATIONS

A-702 INTERIOR ELEVATIONS

A-730 MILLWORK DETAILS

A-731 MILLWORK DETAILS


C07084.006.00 00 01 15 - 3 05-16-16

S-000 GENERAL NOTES

S-001 GENERAL NOTES

S-002 WIND PRESSURE DIAGRAMS

S-101 FOUNDATION PLAN

S-111 LEVEL 2 FRAMING PLAN

S-121 ROOF FRAMING PLAN

S-201 FOUNDATION DETAILS



S-301 FLOOR FRAMING DETAILS



S-401 ROOF FRAMING DETAILS

S-402 ROOF FRAMING DETAILS

S-501 ICE HOUSE

M-001 LEGENDS, NOTES & ABBREVATIONS

M-101 FIRST FLOOR HVAC PLAN

M-102 SECOND FLOOR HVAC PLAN

M-401 ENLARGED MECH ROOMS AND SECTIONS

M-501 MECHANICAL DETAILS

M-502 MECHANICAL DETAILS

M-601 MECHANICAL SCHEDULES

M-701 MECHANICAL CONTROL DIAGRAMS

M-702 MECHANICAL CONTROL DIAGRAMS

E-001 ELECTRICAL LEGEND

E-002 LIGHTING FIXTURE SCHEDULE


C07084.006.00 00 01 15 - 4 05-16-16

EG-101 LIGHTNING PROTECTION PLAN

EL-101 FIRST FLOOR LIGHTING PLAN

EL-102 SECOND FLOOR LIGHTING PLAN

EP-101 FIRST FLOOR POWER PLAN

EP-102 SECOND FLOOR POWER PLAN

ES-101 ELECTRICAL SITE DEMO

ES-102 ELECTRICAL SITE PLAN

ES-103 ELECTRICAL SITE PLAN

ES-104 ENLARGED ELECTRICAL PLANS

ES-105 SCHEDULES AND DETAILS

T-101 FIRST FLOOR SYSTEMS PLAN

T-102 SECOND FLOOR SYSTEMS PLAN

E-401 ENLARGED PLANS

T-401 ENLARGED PLANS

E-501 DETAILS

E-502 GROUNDING & LIGHTNING PROTECTION DETAILS

E-503 DETAILS

E-504 FLOOR BOX DETAILS

E-505 DETAILS

E-506 DETAILS

E-507 DETAILS

E-601 POWER RISER DIAGRAM

E-701 PANELBOARD SCHEDULES



P-001 ABBREVIATIONS, LEGEND AND GENERAL NOTES


C07084.006.00 00 01 15 - 5 05-16-16

P-101 COMPOSITE FLOOR PLAN LEVEL 1

P-102 COMPOSITE FLOOR PLAN LEVEL 2

P-401 PLUMBING ENLARGED PLAN



P-501 PLUMBING DETAILS

P-502 PLUMBING DETAILS

P-601 PLUMBING SCHEDULES

P-901 PLUMBING SCHEMATIC RISERS

P-902 PLUMBING SCHEMATIC RISERS

FA-001 FIRE ALARM NOTES

FA-002 FIRE ALARM SEQUENCE OF OPERATIONS

FA-101 FIRST FLOOR FIRE ALARM PLAN

FA-102 SECOND FLOOR FIRE ALARM PLAN

FP-001 FIRE PROTECTION NOTES

FP-002 FIRE PROTECTION SITE PLAN

FP-101 FIRST FLOOR FIRE SPRINKLER PLAN

FP-102 SECOND FLOOR FIRE SPRINKLER PLAN

FP-501 FIRE PROTECTION DETAILS



FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER PROCUREMENT SUBSTITUTION PROCEDURES BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 00 26 00 - 1 05-16-16

DOCUMENT 00 26 00 - PROCUREMENT SUBSTITUTION PROCEDURES

1.1 DEFINITIONS

A. Procurement Substitution Requests: Requests for changes in products, materials, equipment, and methods of construction from those indicated in the Procurement and Contracting Documents, submitted prior to receipt of bids.

B. Substitution Requests: Requests for changes in products, materials, equipment, and methods of construction from those indicated in the Contract Documents, submitted following Contract award. See Section 01 25 00 "Substitution Procedures" for conditions under which Substitution requests will be considered following Contract award.

1.2 QUALITY ASSURANCE

A. Compatibility of Substitutions: Investigate and document compatibility of proposed substitution with related products and materials. Engage a qualified testing agency to perform compatibility tests recommended by manufacturers.

1.3 PROCUREMENT SUBSTITUTIONS

A. Procurement Substitutions, General: By submitting a bid, the Bidder represents that its bid is based on materials and equipment described in the Procurement and Contracting Documents, including Addenda. Bidders are encouraged to request approval of qualifying substitute materials and equipment when the Specifications Sections list materials and equipment by product or manufacturer name.

B. Procurement Substitution Requests will be received and considered by Owner when the following conditions are satisfied, as determined by Architect; otherwise requests will be returned without action:

1. Extensive revisions to the Contract Documents are not required. 2. Proposed changes are in keeping with the general intent of the Contract

Documents, including the level of quality of the Work represented by the requirements therein.

3. The request is fully documented and properly submitted.

1.4 SUBMITTALS

A. Procurement Substitution Request: Submit to Owner’s Representative. Procurement Substitution Request must be made in writing by prime contract Bidder only in compliance with the following requirements:

1. Requests for substitution of materials and equipment will be considered if received no later than 10 days prior to date of bid opening.


C07084.006.00 00 26 00 - 2 05-16-16

2. Submittal Format: Submit three copies of each written Procurement Substitution Request, using form bound in Project Manual or CSI Substitution Request Form 1.5C.

3. Submittal Format: Submit Procurement Substitution Request, using format provided on Project Web site.

a. Identify the product or the fabrication or installation method to be replaced in each request. Include related Specifications Sections and drawing numbers.

b. Provide complete documentation on both the product specified and the proposed substitute, including the following information as appropriate:

1) Point-by-point comparison of specified and proposed substitute product data, fabrication drawings, and installation procedures.

2) Copies of current, independent third-party test data of salient product or system characteristics.

3) Samples where applicable or when requested by Architect. 4) Detailed comparison of significant qualities of the proposed

substitute with those of the Work specified. Significant qualities may include attributes such as performance, weight, size, durability, visual effect, sustainable design characteristics, warranties, and specific features and requirements indicated. Indicate deviations, if any, from the Work specified.

5) Material test reports from a qualified testing agency indicating and interpreting test results for compliance with requirements indicated.

6) Research reports, where applicable, evidencing compliance with building code in effect for Project, from ICC-ES.

7) Coordination information, including a list of changes or modifications needed to other parts of the Work and to construction performed by Owner and separate contractors, which will become necessary to accommodate the proposed substitute.

c. Provide certification by manufacturer that the substitute proposed is equal to or superior to that required by the Procurement and Contracting Documents, and that its in-place performance will be equal to or superior to the product or equipment specified in the application indicated.

d. Bidder, in submitting the Procurement Substitution Request, waives the right to additional payment or an extension of Contract Time because of the failure of the substitute to perform as represented in the Procurement Substitution Request.

B. Architect's Action:

1. Architect may request additional information or documentation necessary for evaluation of the Procurement Substitution Request. Architect will notify all bidders of acceptance of the proposed substitute by means of an Addendum to the Procurement and Contracting Documents.


C07084.006.00 00 26 00 - 3 05-16-16

C. Architect's approval of a substitute during bidding does not relieve Contractor of the responsibility to submit required shop drawings and to comply with all other requirements of the Contract Documents.



FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER GEOTECHNICAL DATA BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 00 31 32 - 1 05-16-16

DOCUMENT 00 31 32 - GEOTECHNICAL DATA

1.1 GEOTECHNICAL DATA

A. This Document with its referenced attachments is part of the Procurement and Contracting Requirements for Project. They provide Owner's information for Bidders' convenience and are intended to supplement rather than serve in lieu of Bidders' own investigations. They are made available for Bidders' convenience and information, but are not a warranty of existing conditions. This Document and its attachments are not part of the Contract Documents.

B. Soil-boring data for Project, obtained by Universal Engineering Services, dated October, 13, 2015, is available for viewing as appended to this Document.

C. A geotechnical investigation report for Project, prepared by Universal Engineering Services, dated October 13, 2015, is available for viewing as appended to this Document.



FLORIDA POWER & LIGHT FLAGLER SERVICE CENTER PERMIT APPLICATION BRPH ARCHITECTS-ENGINEERS, INC.

C07084.006.00 00 31 43 - 1 05-16-16

DOCUMENT 00 31 43 - PERMIT APPLICATION

1.1 PERMIT APPLICATION INFORMATION

A. This Document with its referenced attachments is part of the Procurement and Contracting Requirements for Project. They provide Owner's information for Bidders' convenience and are intended to supplement rather than serve in lieu of the Bidders' own investigations. This Document and its attachments are not part of the Contract Documents.

B. Permit Application: Complete building permit application and file with authorities having jurisdiction within [five] days of [the Notice of Award] [the Notice to Proceed] [the date of execution of the Contract].

C. Permit Application: The building permit for Project has been applied for by [Owner] [Architect] [Construction Manager]. A copy of the Permit Application is [attached to this Document] [available for viewing on Project Web site].

