FLUIDIC PRODUCTS AND INFORMATION - Degassing Equipment …

www.idex-hs.com

For your information, our U.S.Federal Taxpayer Identificationnumber is 01-0736657; EuropeanTaxpayer Identification numberis DE 146581180.

ORDER PROCESSING/SHIPPINGOrders placed on our website processand ship as specified during thecheckout process. Orders that areplaced via fax/email will be subject toa $100 minimum order quantity andtypically process within one businessday and ship within two business days.Customers who have establishedcontract pricing terms must placecatalog orders directly with theirCustomer Service representative.

All shipments are FCA unlessotherwise noted. For orders notplaced via our website, shippingcharges will be prepaid and added tothe invoice. Or, if requested, we willcharge your carrier account number.

TERMSCredit cards are accepted for ordersplaced within the United States.Purchase orders may also be used byqualified customers. No internationalcredit card payment is possible.No international shipments arepossible. For terms and conditionsof sale please visit www.idex-hs.com/legal-notices. Terms and prices aresubject to change without notice.

RETURN OF MATERIALSReturns must be authorized inadvance. Please contact us within30 days of purchase for yourReturns Material Authorization(RMA) Number. A restocking feemay apply. To request a ReturnMaterials Authorization for IDEXHealth & Science products visitwww.idex-hs.com/return.

Product purchased through aDistributor must be returneddirectly to that Distributor. Pleasecontact them for Return MaterialAuthorization procedures.

DIRECT FROM OUR GLOBALDISTRIBUTION NETWORKIDEX Health & Science has establishedrelationships with a global networkof Distributors that offer outstandingproduct support and assistance.In order to meet our customer’sneeds, and the demands of beinga global supplier, we have come torely on our authorized Distributorsto provide value-added service andsupport of our products. While we arehappy to take your order directly, weencourage you to contact your localIDEX Health & Science Distributor.

FluidicsProductsidex-hs.com

LaserProducts

+1 760 438 2131

ShutterProducts

+1 585 244 7220

OpticalFilters

semrock.com

ORDERING INFORMATION

HOW TO FIND A LOCALDISTRIBUTOR FORFLUIDICS PRODUCTSFor a complete distributor listingplease visit www.idex-hs.com/distributors or email:

US: [email protected]

Europe:[email protected]

Asia:[email protected]

Our customer service team will helpyou contact a distributor in your area.

HOW TO FIND A LOCALDISTRIBUTOR FORSEMROCK PRODUCTSFor a complete distributor listingplease visit www.semrock.com/international-distributors.aspx

The products in this catalog are intended for use withanalytical, biotechnology and diagnostic equipmentand accessories. THE MANUFACTURERS OF THEPRODUCTS IN THIS CATALOG SHALL HAVE NOLIABILITY WHATSOEVER DUE TO ANY MISUSEOF THEIR PRODUCTS. Of course, the safe use ofour products depends on our customers, since it isyou who select and control the protective gear andsafety procedures used, as well as the pressures,temperatures, solvents, samples, ventilation, andother variables. Product and material performanceratings are provided as guides only. Individual fieldtests should be performed by customers to determinesafe operating parameters given your particularprocedures and use. IDEX Health & Science facilitiesare certified ISO 9001.

2

IDX2398-1_Catalog-BioTech.indb 2 12/2/2016 3:49:52 PM

www.idex-hs.com









LaserProducts

+1 760 438 2131

ShutterProducts

+1 585 244 7220

OpticalFilters

semrock.com









2


www.idex-hs.com









LaserProducts

+1 760 438 2131

ShutterProducts

+1 585 244 7220

OpticalFilters

semrock.com









2


www.idex-hs.com









LaserProducts

+1 760 438 2131

ShutterProducts

+1 585 244 7220

OpticalFilters

semrock.com









2


FLUIDIC PRODUCTS AND INFORMATION

FLUID

IC C

ATA

LOG

For ordering and technical support, please contact:

EUROPE | BIOTECH AB | +46 (0)300-56 91 80 | [email protected] | www.biotech.se

USA | BIOTECH USA LLC | 612-703-5718 | [email protected] | www.biotech.se

JAPAN | BIONIK INC. | +81 545-38-9125 | [email protected] | www.bionikinc.com

© 2016 IDEX Health & Science LLC. | IDX2398-1

BIOTECH is a Premium Distributor for IDEX Health & Science

LOCAL DISTRIBUTOR

01_Cover-BioTech.indd 1 12/14/2016 2:03:53 PM

Degassers

INNOVATIVE PRODUCTS FOR FLUIDIC SYSTEMS

www.idex-hs.com

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

ORDER PROCESSING/SHIPPINGOrders placed on our website process and ship as specified during the checkout process. Orders that are placed via fax/email will be subject to a $100 minimum order quantity and typically process within one business day and ship within two business days. Customers who have established contract pricing terms must place catalog orders directly with their Customer Service representative.

All shipments are FCA unless otherwise noted. For orders not placed via our website, shipping charges will be prepaid and added to the invoice. Or, if requested, we will charge your carrier account number.

TERMSCredit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are possible. For terms and conditions of sale please visit www.idex-hs.com/legal-notices. Terms and prices are subject to change without notice.

RETURN OF MATERIALSReturns must be authorized in advance. Please contact us within 30 days of purchase for your Returns Material Authorization (RMA) Number. A restocking fee may apply. To request a Return Materials Authorization for IDEX Health & Science products visit www.idex-hs.com/return.

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORKIDEX Health & Science has established relationships with a global network of Distributors that offer outstanding product support and assistance. In order to meet our customer’s needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

Fluidics Productsidex-hs.com

Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com


HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTSFor a complete distributor listing please visit www.idex-hs.com/distributors or email:


Europe: CustomerService.hsEurope@ idexcorp.com

Asia: CustomerService.hsAsia@ idexcorp.com

Our customer service team will help you contact a distributor in your area.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


GLOBAL PREMIUM DISTRIBUTOR

Biotech AB in Sweden/Europe (Headquarter),

Biotech USA LLC and Bionik Inc Japan are Global

Premium Distributors of IDEX Health & Science.

FAST DELIVERY

With several weekly shipments from IDEX manu-

facturing sites in US, together with our extensive

Swedish warehouse, we support the European &

Global market with short delivery times as well as

fast answers on technical questions and a high level

of flexibility.

LOCAL DISTRIBUTORS

In almost every European country we work in close

co-operation with local distributors that supports

you with excellent daily service, long experience and

highest level of technical assistance.

FULL IDEX ASSORTMENT

With the full IDEX assortment of components for

fluidic systems along with our long experience and

know-how in the field we can assure you to always

do our very best in supplying you with excellent

solutions and products. Customized OEM solutions,

especially in the field of degassing, is something we

offer to instrument manufacturers globally.

BIOTECH + IDEX = EVERYTHING FOR THE LAB

As Global Premium Distributor for IDEX we have

special know-how about their assortment and

can provide you with the right mix of products for

a successful lab.

We have cutting edge knowledge to tailor the

system for laboratories’ specific needs for fluidic

handling. You will find a wide range of products

to suit every possible flow rate and type of fluid.

In this field, we offer a number of well-known

brands, such as Systec, Upchurch, Rheodyne

and Isolation Technologies - all to give you the

best solutions.

KNOW-HOW AND A WIDE ASSORTMENT

INNOVATIVE PRODUCTS FOR FLUIDIC SYSTEMS

www.biotech.se

www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com

151

154

DegassersDegassers improve fluidic instrument precision and reliability by removing dissolved gases from fluids before they outgas and form problem causing bubbles. Three main types of bubble removing products are available. AF based degassers offer the widest range of chemical compatibility and are used to eliminate retention shifts and baseline fluctuations. Silicone based degassers offer the highest flow rate capabilities for water based systems such as diagnostic and life science instrumentation to improve dispense accuracy and reliability. Poridex based products provide rapid bubble remove for locations where bubble introduction cannot be avoided.

FLUIDICS DEGASSERSFLUIDICS DEGASSERS

FLU

IDIC

S150

DEBUBBLERS

DEGASSING SYSTEMS

IDX2398-1_Catalog.indb 150 10/28/16 1:34 PM

www.biotech.se

www.idex-hs.com

DebubblersRemove Bubbles, Dissolved Gas, or Both!Dissolved gases and bubbles in system liquids cause dispense volume anomalies in many instruments, negatively affecting both dispense precision and analytical accuracy. Now you have a choice of components for actively removing bubbles with or without also removing dissolved system gases. Online Vacuum Degassing offers operating convenience, high efficiency and low operating costs compared to other common degassing technologies.

Debubbler/DegasserCombines Vacuum Degassing with Active Bubble Removal

Improves instrument performance — reduces downtime due to bubble formation.

Fewer false positives due to reduction of partial reagent dispenses.

Easily integrates into any pump, degassing tray, or stand-alone degassing application.

Designed for use with water based solutions with no surfactants. Active degassers are recommended for other solutions.

Active DebubblerRemove Bubbles in Fluid Stream Before or After the Pump

Improves instrument performance — reduces downtime due to bubble formation.

Fewer false positives due to reduction of partial reagent dispenses.

Easily integrates into any pump, degassing tray, or stand-alone degassing application.

Transfer-Line DegasserRemoves Dissolved Gases During Fluid Transfer

Eliminates baseline fluctuations for improved detector sensitivity.

Coaxial design reduces number of connections, improves reliability.

Single lumen design increases degassing reliability.

FLUIDICS DEGASSERS DEBUBBLERS

APPLICATION NOTE

Liquid handling

IVD

HPLC/UHPLC

O2 and CO2 removal

In medical analyzers, bubbles interfere with critical volumetric reagent dispenses and cause sample failures, wasting time and money. Because bubbles adhere to nearly every part of a dispensing system, high velocity or induced turbulent flow is often used to displace and discharge bubbles from the flow stream and into a waste area. These alternative processes waste reagents and are time consuming, unpredictable, and may additionally require designing the system to recognize bubbles are present. Regardless of how the systems are designed, aqueous systems will always be subject to the laws of physics that cause out-gassing during changes in fluid temperature, pressure, or chemicals mixture. In fluid applications like these, debubblers are the optimal solution to capture and remove formed bubbles to prevent sample dispense inaccuracies, and degassing is ideal to prevent downstream bubble formation from recurring.

BENEFITS

ACTIVE DEBUBBLER

DEBUBBLER/ DEGASSER

TRANSFER-LINE DEGASSER

Perfect for applications that require dissolved gas like oxygen for reaction kinetics

Improves dispense precision by capturing and removing bubbles

Eliminates false positives and reduces reagent waste by improving instrument performance

Easily integrates into fluidic path

Creates stable instrument performance across system and environmental fluctuations

Prevents the formation of bubbles downstream of the degasser

Eliminates fluctuations for improved detector sensitivity and accuracy by preventing bubble formation

Improves fluidic system reliability because coaxial design reduces the number of connections

Flexible design can be implemented as transfer line in new instruments or existing instruments that don’t have space available

Minimizes fluidic system internal volumes to reduce reagent cost

151FLU

IDIC

SFLU

IDIC

CO

NN

ECTIO

NS

VALV

ESD

EGA

SSERS

CO

LUM

N H

AR

DW

AR

EO

PTICS


www.biotech.se www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.comFLUIDICS DEGASSERS DEBUBBLERS

Syringe Pump

SystemReagent

Vacuum

Debubbler

Typical Debubbler Implementation

System

Syringe Pump

Reagent Vacuum

Degasser

Transfer-Line Degasser Implementation

Overall Dimensions Please note: These drawings are not actual size.

4.8” (121.1 mm)

0.5” (12.7 mm)

3.6” (90.6 mm)

9000-1540Active Debubbler, 2.5 mL

6.8” (172.7 mm)

0.5” (12.7 mm)

5.6” (141.4 mm)

9000-1541Active Debubbler, 5 mL

22.3” (565.15 mm)

0.5” (12.7 mm)

21.1” (535.2 mm)

17.5” (444.5 mm)

9000-1544Debubbler / Degasser, 2.5 mL

40.8” (1035.1 mm)

0.5” (12.7 mm)

39.6” (1005.1 mm)

34” (863.6 mm)

9000-1545Debubbler/Degasser, 5 mL

IMPLEMENTATIONS

44.4” (1128 mm)

0.8” (20.3 mm)

9000-1549Transfer-Line Debubbler, 1.1 meter Gas bubbles are actively removed

from a flowing liquid stream by vacuum via the PORIDEX membrane.

Porid

ex M

embr

ane

Liquid Flow Liquid FlowVacuum

GasBubbles

Debubblers (Cont.)

SPECIFICATIONS (ALL PLATFORMS)

ACTIVE DEBUBBLERS DEGASSER/DEBUBBLERS 200 KPA (30 PSI) @ 25 ºCBubble Removal (volume of air removed/min @ 10 mL/min H2O) Up to 30 cc Up to 30 cc N/A

Degassing Efficiency† @ 1 mL/min H2O

N/A 2.5 mL size: 36% O2 removal, 5.0 mL size: 55% O2 removal < 4 ppm dissolved O2 at 5 mL/min

Membrane Material PORIDEX® PORIDEX PORIDEX

Wetted Materials PORIDEX, Polyolefin, FEP, ETFE, Ultem® PORIDEX, Polyolefin, FEP, ETFE, Ultem PORIDEX, Polyolefin, FEP, ETFE

Solvent Compatibility Solutions > 50% aqueous. Not compatible with detergent concentrations > 0.05%.

Solutions > 50% aqueous. Not compatible with detergent concentrations > 0.05%.

Solutions > 50% aqueous. Not compatible with detergent concentrations > 0.05%.

Standard Bubble Trap Volume 2.5 / 5.0 mL 2.5 / 5.0 mL N/A

Transfer-Line Volume N/A 2.5 / 5.0 mL < 4 mL

Max. Operating Pressure 200 kPa (30 psi) @ 25 ºC 200 kPa (30 psi) @ 25 ºC 200 kPa (30 psi) @ 25 ºC

Max. Operating Temperature 40 ºC 40 ºC 40 ºC

Recommended Vacuum Level Minimum 16 kPa absolute Minimum 16 kPa absolute Minimum 16 kPa absolute

Liquid Connection 1/4-28 fitting system 1/4-28 fitting system 1/4-28 fitting system

Vacuum Connection Tubing vacuum port(s) for 1/8" (3 mm) ID elastomeric tubing

Tubing vacuum port(s) for 1/8” (3 mm) ID elastomeric tubing

Tubing vacuum port(s) for 1/8” (3 mm) ID elastomeric tubing

Pressure Drop 0.8 mm Hg / mL / min (assumes laminar flow and viscosity of 1 cP)

0.8 mm Hg / mL / min (assumes laminar flow and viscosity of 1 cP)

0.8 mm Hg / mL / min (assumes laminar flow and viscosity of 1 cP)

† Debubbling / degassing efficiency can be optimized based on flow rate, fluid to be degassed, and gas to be removed.

152FL

UID

ICS

FLU

IDIC

CO

NN

ECTI

ON

SVA

LVES

DEG

ASS

ERS

CO

LUM

N H

AR

DW

AR

EO

PTIC

S











Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com

APPLICATION NOTE

Why Degas Your Mobile Phase?

Dissolved air in HPLC mobile phases can result in flow rate instability and baseline disturbance.

Flow rate instability: Non-degassed mobile phase can outgas in the pump head, causing bubbles to be formed and trapped inside the head or check valves. These bubbles can cause flow disturbances and pressure fluctuations, resulting in flow rate instability.

Baseline disturbance: As the mobile phase passes through the column, it experiences a large pressure drop. Non-degassed mobile phase can outgas due to this pressure differential, causing air bubbles to form. Air bubbles passing through or lodging in the flow cell cause detection disturbances, exhibited as baseline noise.

Why Use a Degassing System?

Helium sparging is a common means of degassing HPLC solvents. This method has its drawbacks, however. Helium tanks are expensive and bulky, and solvent backup and contamination are concerns. In addition, helium sparging can change the composition of a premixed mobile phase over time, due to the difference in the evaporation rates of mobile phase components.

In contrast, the IDEX Health & Science Degassing System has none of these drawbacks, and it is extremely fast and efficient at removing dissolved gases — more efficient than helium sparging or PTFE-based degassing systems.

Tubing Connections

We recommend ETFE tubing (page 27) be used to limit regassing of mobile phase between the degasser and your pump. ETFE is recommended because of its superior impermeability to gases (compared to PTFE, FEP, and PFA tubing). Applicable flangeless fittings for 1/8” OD tubing are found on page 45.

GPC and HFIP Applications

Standard degassing chambers, with PEEK bulk head unions, are not recommended for GPC applications or for use with HFIP (hexafluoroisopropanol). Special GPC “hardened” versions are available. Please contact us for more information.

Dissolved gases are actively removed from a flowing liquid stream by vacuum via the IDEX Health & Science AF® membrane.

TYPICAL DEGASSER IMPLEMENTATION

NOTE

Degassing tubing is flexible and therefore can be coiled to shorten the overall length or used to transfer the fluid within an instrument to the next desired location.

Eluent

HPLC Pump

Injector/Autosampler

Degassing Chamber

ControllerVacuum Pump

FLUIDICS DEGASSERS DEBUBBLERS

To Vacuum Controller

To Vacuum Pump

Degassed Eluent OutEluent In

DissolvedGas

AF

Part No. Description Standard Bubble Trap Size Transfer Line Length Internal Volume Max Bubble Capacity Qty.

DEBUBBLER SERIES – AVAILABLE STANDARD CONFIGURATION9000-1540 2.5 mL Active Debubbler 2.5 mL — 2.5 mL 2.5 mL ea.

9000-1541 5 mL Active Debubbler 5 mL — 5 mL 5 mL ea.

9000-1544 2.5 mL Debubbler/Degasser 2.5 mL 17.5” (444.5 mm) 2.5 mL in transfer line + 2.5 mL in bubble trap 2.5 mL ea.

9000-1545 5 mL Debubbler/Degasser 5 mL 34” (863.6 mm) 5 mL in transfer line + 5 mL in bubble trap 5 mL ea.

9000-1549 1.1 m Transfer-Line Degasser — 1.1 m (43”) 4 mL N/A ea.

Debubblers

153FLU

IDIC

SFLU

IDIC

CO

NN

ECTIO

NS

VALV

ESD

EGA

SSERS

CO

LUM

N H

AR

DW

AR

EO

PTICS











Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com

Our Stand-Alone MINI and Prep-Scale HPLC vacuum degassing systems are high-efficiency, in-line modules that remove dissolved gases from the mobile phase. Their unique design assures reliable continuous operation and the highest level of performance available without the need for helium sparging. Up to five solvent lines may be degassed simultaneously by one unit.

ZHCR® Control with Built-in Test Diagnostics Microcontroller self-test vacuum sensor validation on power-up

Continuous vacuum system monitoring to ensure optimum operational conditions are maintained

Vacuum system fault detection and shutdown function indicators

AF / ZHCR Degassing TechnologyFlow-through vacuum degassing chamber with a single amorphous perfluorinated copolymer (IDEX Health & Science AF®) degassing membrane, enabling degassing efficiency 50 times that of PTFE.

The ZHCR (Zero Hysteresis / Constant Run) vacuum pump employs a patented closed-loop, micro-stepping rpm control strategy permitting the pump to run with continuously variable speed, providing quick pull-down at high rpm, and then sustaining a consistent vacuum level at low rpm.

Fluctuations in detector baseline due to changes in vacuum level are eliminated by not having to repeatedly stop and start a single-speed pump. This also greatly reduces wear and noise.

The brushless motor enables quiet operation and is appropriate for environments where solvent vapors may be present.

Full Stand Alone Degassing Systems

FLUIDICS DEGASSERS FULL STAND ALONE DEGASSING SYSTEMS

SPECIFICATIONS

STAND-ALONE DEGASSING MODULESMaximum Number of Degassing Channels 5

Degassing Efficiency† @ 1 mL / min MeOH > 70% O2 Removal

Membrane Material IDEX Health & Science AF

Other Wetted Materials PEEK, PPS(GF), PTFE(GF), FEP

Solvent Compatibility Not compatible with fluorinated solvents. Special version available for GPC solvents.

Flow Path ID1 1.14 mm (0.045”)

Internal Volume 480 µL (standard)

Maximum Pressure (@ 25 °C) 0.5 MPa (70 psi)

Pressure Drop 0.18 kPa/mL/min† Degassing efficiency can be optimized based on flow rate, fluid to be degassed, and gas to be removed. 1 Standard ID; other sizes available.

Analytical and Prep scale models

Ultra-high degassing efficiency

Low volume, easy to prime

Patented control eliminates baseline fluctuations

Inert flow path

5+ year lifetime

154

FLU

IDIC

SFL

UID

IC C

ON

NEC

TIO

NS

VALV

ESD

EGA

SSER

SC

OLU

MN

HA

RD

WA

RE

OPT

ICS

BUY NOW

Dissolved gasses in a fluidic system can often cause troubles. When the pressure or the temperature changes, the dissolved gasses can form bubbles which affect the accuracy, precision and performance of your equipment. On-line degassing is a very efficient way of removing dissolved gasses from the liquid and preventing bubble formation.

No Troubles with Bubbles Anymore!

– prevent bubble formation in your Fluidic System with BIOTECH DEGASi line of Degassers.

ELIMINATES TROUBLES WITH BUBBLES

CLASSIC

GENERALPURPOSE

GPC

GPCELUENT

MICRO

LIMITEDVOLUME

SEMI-PREP

SEMIPREP

Systec AF™ Internal Volume 480 µl 480 µl 100 µl 925 µl

No of Channels 2-5 2-5 2-5 2-5

Biocompatible Flow Path Y N Y Y

Approximate Max Flow Per Channel (ml/min) 3 3 0.5 6

Inner Dimension Flow Path (mm) 1.14 1.14 1.14 1.14

www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.biotech.sewww.idex-hs.com











SPECIFICATIONS














Inert flow path

5+ year lifetime

154FL

UID

ICS

FLU

IDIC

CO

NN

ECTI

ON

SVA

LVES

DEG

ASS

ERS

CO

LUM

N H

AR

DW

AR

EO

PTIC

S


www.idex-hs.com











SPECIFICATIONS














Inert flow path

5+ year lifetime

154

FLU

IDIC

SFL

UID

IC C

ON

NEC

TIO

NS

VALV

ESD

EGA

SSER

SC

OLU

MN

HA

RD

WA

RE

OPT

ICS

BUY NOW

www.idex-hs.com











SPECIFICATIONS














Inert flow path

5+ year lifetime

154

FLU

IDIC

SFL

UID

IC C

ON

NEC

TIO

NS

VALV

ESD

EGA

SSER

SC

OLU

MN

HA

RD

WA

RE

OPT

ICS

BUY NOW

Systec AF™ Internal Volume 5.3 / 8.4 / 13.8 ml 23 ml 285 µl 60 ml (silicone)

No of Channels 2 1-4 2, 4, 6 1

Biocompatible Flow Path N / Y / Y Y Y Y

Approximate Max Flow Per Channel (ml/min) 15 / 25 / 50 75-100 2 500

Inner Dimension Flow Path (mm) 1.91 N/A 0.89 N/A

NEW!

PREP

PREP COMPACTAPPLICATION

COMPACT

ORGANICSOLVENTS

NEW!

HIGHFLOW

NEW!

Part Number Number of Channels Internal Volume

BIOTECH DEGASI CLASSIC

0001-6352-A 2 480 µl

0001-6353-A 3 480 µl

0001-6354-A 4 480 µl

0001-6355-A 5 480 µl

BIOTECH DEGASI GPC

0001-6622 2 480 µl

0001-6623 3 480 µl

0001-6624 4 480 µl

0001-6625 5 480 µl

BIOTECH DEGASI MICRO

0001-6352-S 2 100 µl

0001-6353-S 3 100 µl

0001-6354-S 4 100 µl

0001-6355-S 5 100 µl

Part Number Number of Channels Internal Volume

BIOTECH DEGASI SEMI-PREP

0001-6352-L 2 925 µl

0001-6353-L 3 925 µl

0001-6354-L 4 925 µl

0001-6355-L 5 925 µl

BIOTECH DEGASI PREP

0001-2053 2 5.3 ml

0001-6482 2 8.4 ml

0001-6484 2 13.8 ml

BIOTECH DEGASI PREP+

0001-0120 1 23 ml

0001-0220 2 23 ml

0001-0420 4 23 ml

BIOTECH DEGASI COMPACT

0004-2285 2 285 µl

0004-4285 4 285 µl

0004-6285 6 285 µl

BIOTECH DEGASI HIGH FLOW

HF.500-S Stand Alone 1 60 ml

HF.500-A OEM version 1 60 ml

Degasi Prep+ make it possible to degass organic solutions with higher flows!

More info at www.biotech.se

HIGHFLOW RATE75 ml/min

Per channel

www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.idex-hs.com









Laser Products

+1 760 438 2131

Shutter Products

+1 585 244 7220

Optical Filters

semrock.com









2


www.biotech.sewww.idex-hs.comFLUIDICS DEGASSERS FULL STAND ALONE DEGASSING SYSTEMS

NOTE

Power Requirement

Input Power required with AC Adapter (included): 100 to 240 V AC (±10%), 1A, 50 to 60 Hz (±3 Hz). Four interchangeable wall sockets are supplied with the AC Adapter: North America/Japan, U.K., Continental Europe, Australia.

CE Certification

This product has been certified under the following CE testing standards: EN61326-1; EN55011; EN61300-3-2; EN61300-3-3, & EN61010-1.

POWER STATUS VACUUM

EXHAUST

VALIDATION

POWER15-24VDC

0.85A MAX.

POWER STATUS VACUUM

EXHAUST

VALIDATION

POWER15-24VDC

0.85A MAX.

Overall Dimensions

6.24” (163 mm)

3.12”(79 mm)

11.67”(296 mm)

10.35”(263 mm)

2.87”(73 mm)

5.17”(131 mm)

Part No. Number of Channels Channel Volume Max HPLC Gradient Flow Capability Pressure DropE Degassing Flow Path ID Qty.

STAND ALONE MINI VACUUM DEGASSING SYSTEMS — AVAILABLE CONFIGURATIONSA

0001-6500 2 480 µL 2.0 mL/minC 0.18 kPa/mL/min 0.045” (1.14 mm) ea.

0001-6501 4 480 µL 2.0 mL/minC 0.18 kPa/mL/min 0.045” (1.14 mm) ea.

STAND ALONE PREP SCALE VACUUM DEGASSING SYSTEMS — AVAILABLE CONFIGURATIONSA, B

0001-6482 2 8.4 mL 20 mL/minD 0.04 kPa/mL/min 0.065” (1.65 mm) ea.

0001-6484 2 13.8 mL 40 mL/minD 0.06 kPa/mL/min 0.065” (1.65 mm) ea.

A. Custom configurations are available. Consult us for your own OEM solution to your specific application. B. The standard prep scale chambers are not recommended for GPC applications or for use with HFIP (hexafluoroisopropanol).C. The flow rates given are for a gradient mixture of 50/50 MeOH/H2O, with a typical low pressure gradient mixing valve. Higher flow rates are possible with high pressure mixing.D. The flow rates given are for a gradient mixture of 60/40 MeOH/H2O, with a typical low pressure gradient mixing valve. Higher flow rates are possible with high pressure mixing. E. Estimated tubing pressure per unit change in flow assuming laminar flow with a viscosity of 1.0 cP


155FLU

IDIC

SFLU

IDIC

CO

NN

ECTIO

NS

VALV

ESD

EGA

SSERS

CO

LUM

N H

AR

DW

AR

EO

PTICS


Documents

FLUIDIC PRODUCTS AND INFORMATION - Degassing Equipment …