6

FO

RM

W O

RK

SO

LU

TIO

NS

: PLY

WO

OD

FORMRITE – FORMPLY

This high quality, structural Australian plywood is manufactured by Carter Holt Harvey and holds EWPAA product certification and FSC Chain of Custody. FORMrite plywood provides strong support for the forming of concrete walls, floors, roofs, frames and civil engineering structures. Its hard, durable, resin-impregnated paper overlay produces a smooth, Class 2 concrete finish. FORMrite is tough and dimensionally stable, making it ideal for the rigours of formwork construction.

Description Stress Grade Weight (kg/sheet) Code Number

FORMrite Ply 1800x1200x17mm G2S F14 21 CHH64F14

FORMrite Ply 1800x1200x17mm G2S F17 22 CHH64F17

FORMrite Ply 1800x1200x17mm G2S F22 22 CHH64F22

FORMrite Ply 1800x1200x17mm G2S F27 22 CHH64F27

FORMrite Ply 2400x1200x17mm G2S F14 28 CHH84F14

FORMrite Ply 2400x1200x17mm G2S F17 29 CHH84F17

FORMrite Ply 2400x1200x17mm G2S F22 29 CHH84F22

FORMrite Ply 2400x1200x17mm G2S F27 29 CHH84F27

FORMrite Ply 2400x1200x12mm G2S F11 20 CHH84F1112

FORMrite Ply 596x1200x17mm G2S F14 7 CHH24F14

FORMrite Ply 1198x1200x17mm G2S F14 14 CHH44F14

Due to quality control, the supplier may occasionally downgrade plywood sheets from Good 2 Sides (G2S) to Good 1 Side (G1S), Good 0 Sides (G0S) or Factory Seconds (RJ), which may be available upon request.

ROYALPLY – FORMPLY

ROYALply is a film faced plywood made from high quality softwood and holds EWPAA product certification and PEFC Chain of Custody. Manufactured to AS/NZS 6669 standards with a special phenolic resin-impregnated overlay to provide a smooth surface finish and allow multiple re-use of panels in concrete pours. When used in conjunction with good formwork practices ROYALply achieves Class 2 or Class 3 off-form finish as per AS 3610-1995. It is ideal for both commercial and civil construction applications

Description Stress Grade Weight (kg/sheet) Code Number

ROYALply 1800x1200x17mm G2S F17 23 PNG64F17

ROYALply 2400x1200x17mm G2S F17 32 PNG84F17

ROYALply 1800x1200x17mm G2S F22 23 PNG64F22

ROYALply 2400x1200x17mm G2S F22 32 PNG84F22

Due to quality control, the supplier may occasionally downgrade plywood sheets from Good 2 Sides (G2S) to Good 1 Side (G1S), Good 0 Sides (G0S) or Factory Seconds (RJ) and may be available upon request.

TPLY – FORMPLY

This high quality, structural Australian plywood is manufactured by Ta Ann Tasmania and holds EWPAA and PEFC Chain of Custody certification. TPLY plywood panel is predominately produced from 100% renewable Tasmanian log resource certified under PEFC Chain of Custody. It is graded as either Eucalyptus hardwood or as a combination with softwood veneers. Its durable A-Type marine bond, hard phenolic surface and high quality hardwood veneers offer an off-form Class 2 finish and make it durable and reusable when used with good practice.

Description Stress Grade Weight (kg/sheet) Code Number

TPLY 1800x1200x17mm G2S F17 24-26 TPLY64F17

TPLY 2400x1200x17mm G2S F17 32-35 TPLY84F17

TPLY 1800x1200x17mm G2S F22 28-30 TPLY64F22

TPLY 2400x1200x17mm G2S F22 37-40 TPLY84F22

PLYWOOD

7

FO

RM

WO

RK

SO

LU

TIO

NS

: PLY

WO

OD

4MPLY – FORMPLY4Mply is a high quality film faced plywood manufactured to the structural requirements of AS/NZS 6669. It also holds Benchmark and JAS-ANZ accreditation. Its high density, phenolic overlay helps protect the face veneer and provides a smooth surface for poured concrete and durability for multiple uses. Panel edges are sealed with acrylic paint to minimise moisture uptake.

Description Stress Grade Weight (kg/sheet) Code Number

4Mply 1800x1200x17mm G2S F17 23 4M64F17

4Mply 2400x1200x17mm G2S F17 31 4M84F17

FILM FACED PLYWOODThis 17mm thick film faced plywood has a similar appearance and dimension as formply but carries no structural rating. It is ideal for non-structural, general purpose use.

Description Stress Grade Weight (kg/sheet) Code Number

Film Faced Ply 1800x1200x17mm Non-Structural 20 FF64

BENDING PLYWOODNon-structural, film faced plywood. 4mm and 9mm thick sheets are ideal for bending to curved forms such as curved kerbs, edge boards, upstands, walls, circular stairs and formed construction joints.

Description Stress Grade Weight (kg/sheet) Code Number

Film Faced Ply 2440x1220x4mm Non-Structural 5 FF844

Film Faced Ply 2440x1220x9mm Non-Structural 13 FF849

NON FILM FACED – CD / DD PLYWOOD Ecoply is manufactured by Carter Holt Harvey from sustainably-grown Australian and New Zealand plantation pine. It is a non film faced plywood available with Structural or Non-structural ratings. With a range of uses throughout the building industry, it is commonly selected for uses such as bracing, non-decorative interior linings such as floors and walls, temporary hoardings, general purpose construction and DIY projects. It is available in a range of surface appearance grades and sheet thicknesses. Veneer quality C is a non-appearance grade with a solid surface, with all open defects, such as knot holes or splits, filled and sanded. Veneer quality D is the lowest non-appearance grade of plywood with some open imperfections such as knot holes or splits.

Description Stress Grade Weight (kg/sheet) Code NumberEcoplyCD 2400x1200x7mm F8 11 CHH84F8CD7

EcoplyCD 2400x1200x9mm F8 14 CHH84F8CD9

EcoplyCD 2400x1200x12mm F11 19 CHH84F11CD12

EcoplyCD 2400x1200x15mm F11 24 CHH84F11CD15

EcoplyCD 2400x1200x17mm F11 27 CHH84F11CD

EcoplyCD 2400x1200x19mm F11 30 CHH84F11CD19

EcoplyCD 2400x1200x21mm F11 33 CHH84F11CD21

EcoplyCD 2400x1200x25mm F11 40 CHH84F11CD25

EcoplyCD 2400x1200x12mm Non Structural 19 CHH84CD12NS

EcoplyCD 2400x1200x17mm Non Structural 27 CHH84CDNS

Due to quality control, the supplier may occasionally downgrade plywood sheets from CD to DD grade and which may be available upon request.