Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Superslim
Soldiers
Formwork Direct International
Tel: 0151 532 0179
www.formworkdirect.co.uk
Superslim Soldiers Product Overview
Overview
Superslim Soldiers are formwork primary beams that are exceptionally sturdy and
are easily assembled into beams of almost any length, which enables them to be used
in numerous temporary works applications.
Superslim Soldiers are robust and can handle frequent re-use. Formwork ties and
components can be easily fixed practically anywhere along the Soldiers length which
allows flexibility when designing schemes.
Solid high yield steel enables high load capacities for maximum safety.
Applications
Superslim Soldiers are available in a variety of lengths and can be adapted with a
large range of accessories which means they can be assembled into solutions such
as:
• Wall Formwork panels
• Bridge cantilever edge and deck supports.
• Bridge Deck Formwork
• Travelling gantries
• Vertical and raking propping
• Spanning beams and trusses
• Temporary support structures
• Façade retention
Superslim Soldiers Product Features
Product Features & Benefits
A Variety of Lengths
Superslim Soldiers come in nine standard lengths (10mm up to 3600mm) which
means that beams can be assembled to virtually any length.
Versatility
The Soldiers versatility combined with simplicity enables them to handle a large array
of applications regardless of project size. From Shoring and Frames to Formwork
panels Superslim Soldiers have the solutions that also allow design freedom.
Compatibility
Superslim Soldiers are compatible with a wide range of products thus reducing the
need for expensive purchases of other equipment.
Sturdiness
Superslim Soldiers are built to maximize repeat usage. Their simple consistent design
means that they can be used time and time again with very little deterioration over
time whilst not effecting the High Load Capacity.
Superslim Soldiers Components
SUPERSLIM SOLDIER BEAMS
Superslim Soldier 90mm
Weight: 7.32kg
Superslim Soldier 900mm
Weight: 22.00kg
Superslim Soldier 180mm
Weight: 8.70kg
Superslim Soldier 1260mm
Weight: 33.00kg
Superslim Soldier 360mm
Weight: 11.98kg
Superslim Soldier 1800mm
Weight: 38.80kg
Superslim Soldier 540mm
Weight: 15.24kg
Superslim Soldier 2700mm
Weight: 55.38kg
Superslim Soldier 720mm
Weight: 18.74kg
Superslim Soldier 3600mm
Weight: 72.18kg
End Plate 10mm Weight 2.91kg
Superslim Soldiers Components
ALFORM TO
SUPERSLIM SOLDIER
CLAMP
GTX TO SOLDIER
CLAMP
Clamp Assembly
Weight: 0.21kg
GTX to Soldier Clamp
MK1A
Weight: 0.6kg
M12 Unifix Bolt
Weight: 0.05kg
TIMBER WALING
CLAMP ASSEMBLY
Hex Nut – M12 Hex
Gr8.8
Weight: 0.05kg
Timber Waling Clamp
Short
Weight 0.25kg
UNIVERSAL CLAMP Timber Waling Clamp
Long
Weight 0.42kg
Universal Clamp
Weight: 0.14kg
ANCHOR PLATE
SWL = 70kN Tension /
90lN Shear
Anchor Plate
Weight: 7.40kgB CLAMP
SWL = 3.25kN / Pair
B Clamp
Weight: 0.7kg
SLIMSHOR TUBE
CLAMP
SWL = 6.25kNm in slip
/ each
Slimshor Tube Clamp
(Galvanized)
Weight: 1.3kg
90 DEGREE CORNER
ANGLE
6 WAY CONNECTOR
90 Degree Corner
Weight: 8.66kg
6 Way Connector
Weight: 25.0kg
PIVOT CLEAT SET
Range = 55 degrees
min
220 degrees max
CORNER PIVOT
SWL = 65kN / Pivot
Pivot Cleat Set
Weight: 8.75kg
Corner Pivot
Weight: 7.29kg
Superslim Soldiers Components
PROP SPADE END
LINK & PROP PIVOT
TUBE
SWL = 65kN (SWL can
be restricted by the
length of the Push-Pull
Prop)
PROP JACKS LEFT &
RIGHT HAND
Adjustable Range =
405 – 635mm. SWL =
+/- 100kN
Prop Spade End Link
Weight: 3.09kg
Prop Jack – Left Hand
Weight: 14.48kg
Prop Pivot Tube
Weight: 1.81kg
Prop Jack – Right Hand
Weight: 14.48kg
END PLATE ADAPTOR TILT PLATE
SWL = 100kNEnd Plate Adaptor
Weight: 1.0kg Tilt Plate
Weight:: 4.81kg
STRUT ADAPTORS TURNBUCKLES
Strut Adaptor
Weight: 5.0kg
Short Turnbuckle
Range = 915 -1220 mm
Weight: 7.0kgStrut Adaptor 90 degree
Weight: 5.0kg Superslim Turnbuckle 2
Range = 1400 – 1700
mm
Weight: 10.6kg
LIFTING PLATE
SWL = 30kN / Pair
Lifting Plate
Weight: 3.19kg
Superslim Turnbuckle 3
Range = 1520 – 1830
mm
Superslim 19mm pin &
clip
Weight: 0.22kg
Superslim Turnbuckle 4
Range = 1915 – 2225
mm
Weight: 13.4kgSUPPORT PLATE
SWL = 10kN Superslim Turnbuckle 5
Range = 2200 – 2510
mm
Weight: 15.0kg
Support Plate
Weight: 5.3kg
PLUMBING JACKNut – M16 Hex GR8.8
Weight: 0.03kg Plumbing Jack
Range = 70 -200 mm
Weight: 5.2kgSet Pin – M16 x 40
GR8.8
Weight: 0.08kg
Superslim Soldiers Components
SPREADER BEAM
ADAPTOR
SWL = 30kN / Unit
JOINT STIFFENERS
SWL = 20kNm
Bending / 150kN
Tension
Spreader Beam Adaptor
Weight: 9.35kg
Joint Stiffener –
Galvanized
Weight: 1.44kg
Tube – Prop Pivot
Weight: 1.81kg
Bolt – M16 x 110 Gr8.9
Weight 0.20kg
ACCESS BRACKET
SWL on the Bracket =
3.2kN UDL
Nut – M16 Hex Gr8.8
Weight: 0.03kg
SINGLE SIDED BEAM
Access Bracket
Weight: 6.65kg Single Sided Beam
540mm
Weight: 16.0kgSINGLE SIDED
CORNER
Single Sided Corner
540x 540mm
Weight: 30.0kg
PORTHOLE BEARING
SWL = 60kN in Tension
FIXED STRUT &
ADAPTOR
Porthole Bearing –
Galvanized
Weight: 2.00kg
Fixed Strut Adaptor
Weight 16.0kg
Fixed Strut 2896 mm
Weight: 39.0kgRapid Tie Nut –
Hexagon 50mm
Weight 0.16kg
AR-80 & CL-40
Shoring SystemsAlulight Props
105 & 70
Easiform
Frami Formwork
FDI Galvanized
Push-Pull Props
Aluminium Faced Cardboard
Column FormworkFormsafe
Barrier System
MK II Soldiers &
Aluminium BeamsFD MAX Heavy Duty
Panel System
Formwork
AccessoriesFDP
Euro Props
Pecaform
Permanent FormworkFD Light Modutec
Panel Formwork
For our full range of our products contact us and request a brochure:
Formwork Direct International Ltd. Tel: 0151 532 0179
71-83 Derby Road email: [email protected]
Liverpool
Merseyside Or Visit us at:
L20 8LW www.formworkdirect.co.uk
Superslim Soldiers Contact Us