Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.27
Application Guide
All prices exclude GST
Patch Fitting Application Guide
Fin Requirements
For 10mm Glass
As a guide, when the height of the overpanel (A) plus the width of the side panel (B) exceeds a total of 1200mm, a support fin is required. A fin is not nescessary if either A or B are less than 400mm.
For 12mm Glass
As a guide, when the height of the overpanel (A) plus the width of the side panel (B) exceeds a total of 1500mm, a support fin is required. A fin is not nescessary if either A or B are less than 500mm.
Fins are required to stiffen an assembly from the door action and windloads.
Maximum Recommended Door Sizes
For 10mm Glass
Doors with patch fittings 2400mm H x 1000mm WDoors with door rails 2500mm H x 1100mm W
For 12mm Glass
Doors with patch fittings 2700mm H x 1400mm WDoors with door rails 2700mm H x 1400mm W
Doors Clearances
Recommended clearances are as detailed on drawings.
(Measured to top of fixing plate)
5.5mm11mm
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.28
Glass Preparation
All prices exclude GST
Glass Preparation Drawing for MP10, MP20, MP22 & MP34 (Not to Scale)
Important Note for MP34
Sizes 161, 148 & 68 are based on 3mm clearance between the overpanel and the vertical wall/mullion.Therefore if the overpanel is to fix into a recessed or wall mounted channel than these sizes must be adjusted to suit.
Glass Preparation Drawingfor MP10-180 & MP20-180(Not to Scale)
Glass Preparation Drawingfor MP34-180(Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.29
Glass Preparation
All prices exclude GST
Glass Preparation Drawing for MP40 (Not to Scale)
Glass Preparation Drawing for MP40-180 (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.30
Glass Preparation
All prices exclude GST
Glass Preparation Drawing for MP41 (Not to Scale)
Glass Preparation Dwg for MP61 (Not to Scale) Glass Preparation Drawing for MP70 (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.31
Glass Preparation
All prices exclude GST
Pivot Pole Glass Preparation Drawings (Not to Scale)MPP25 MPP34 MPP40
MPP61 MPP20 MPP10
451, 452, 483 & 485 Spider Fitting Glass Preparation Drawing (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.32
Glass Preparation
All prices exclude GST
445/4M Glass Preparation Drawing
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.33
Glass Preparation
All prices exclude GST
445/4M/2 Glass Preparation Drawing
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.34
Glass Preparation
All prices exclude GST
445/4M/2Y & 445/4M/1Y Glass Preparation Drawing
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.35
Glass Preparation
All prices exclude GST
445/2M & 445/2M/1 Glass Preparation Drawing
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.36
Glass Preparation
All prices exclude GST
446/4, 446/2 & 446/2/1 Glass Preparation Drawing
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.37
Glass Preparation
All prices exclude GST
446/4/90 Glass Preparation Drawing
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.38
Glass Preparation
All prices exclude GST
443/4 Glass Preparation Drawing
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.39
Glass Preparation
All prices exclude GST
342.1 Patch Lock Glass Preparation Drawing (Not to Scale)
456 Patch Lock Glass Preparation Drawing (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.40
Glass Preparation
All prices exclude GST
MP100 Glass Preparation Drawing (Not to Scale)
MP200 Patch Lock & MP220 Keeper Glass Preparation Drawing (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.41
Glass Preparation
All prices exclude GST
MP300 Glass Preparation Drawing (Not to Scale)
MP300 Patch Lock & MP320 Keeper Glass Preparation Drawing (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.42
Dimensions & Glass Preparation
All prices exclude GST
MP100F Security Patch Lock & MP100K Keeper Glass Preparation Drawing (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.43
Glass Preparation
All prices exclude GST
MP3582 Security Patch Lock & MP3582K Glass Preparation Drawing (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.44
Glass Preparation
All prices exclude GST
MSL Sliding Door Latch / LockGlass Preparation Drawing (Not to Scale)
Lever Lockset & Latchset Glass Preparation Drawing (Not to Scale)
Sliding Door Flush PullGlass Preparation Drawing (Not to Scale)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.45
Glass Preparation
All prices exclude GST
Metro Door Rail Installation Details
Please Note
• Dimensions and deductions are the same for top and bottom rails.
• Glass deduction for rail is 57mm.
• Typical floor clearance for MFG (Fixed Spindle) Floorspring is 9mm.
• Typical floor clearance for MFX (Removable Spindle) Floorspring is 12mm.
• Typical head clearance for door is 3mm but may be larger depending on top pivot used.
• Rail Length is equal to door/sidelight width.
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.46
Dimensions & Glass Preparation
All prices exclude GST
AGA Door Rail Installation Details
Please Note
• Dimensions and deductions are the same for top and bottom rails.
• Glass deduction for rail is 49mm.
• Typical floor clearance for MFG (Fixed Spindle) Floorspring is 9mm.
• Typical floor clearance for MFX (Removable Spindle) Floorspring is 12mm.
• Typical head clearance for door is 3mm but may be larger depending on top pivot used.
• Rail Length is equal to door/sidelight width.
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.47
Dimensions
All prices exclude GST
Metro Floorspring Dimensions
12
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.48
Installation Details
All prices exclude GST
Metro Concealed Overhead Closer Installation Details (COC is supplied with these details)
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.49
Dimension Details
All prices exclude GST
GEZE Floorspring Details
GTS500NV
Unit 19, 761 Great South Road, PenrosePO Box 112 186, Penrose, Auckland, New Zealandphone 09 579 2503 fax 09 579 2751email [email protected] www.mfgs.com.au
2009
Frameless Glass Commercial Hardware
3.50
Dimension Details
All prices exclude GST
Geze Floorspring Details
GTS550NV