Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
1
Frames forsliding doors
40
60
953
15
56
69
9
40
60
953
15
56
69
9
KRIKET is a modern, flexible, and dynamic company that combines the highest production technologies with an innovative product resulting from our knowledge of the market and treating the environment with the utmost respect.
Our plant is located in the north of Spain and there we manufacture all product ranges, from the most standard to a complete range
of special measurements.
Our products are conceived from a base of innovation and manufactured with anti-corrosive materials (aluminium, zinc sheets, wood, etc.), using materials of the highest quality, with the possibility of recycling all of their components.
3
We believe that the assembly and subsequent operation of our articles are a good part of their quality and a fundamental part of their competitiveness.
The guarantee on KRIKET products is based on all of the above. The guarantee on materials is 10 years. The aluminium guides and rail kit are also guaranteed for 10 years provided that the weight of the door does not exceed 120 Kilograms.
Hoping that this information is useful, we put ourselves at your disposal if you require any further information on or explanation of our products.
G U A R A N T E E
All articles manufactured by Kriket Armazones, S.L. follow the highest standards of quality and as a result of this the guarantee is for 10 years.
The implementation of this guarantee follows the steps explained below:
TRANSPORTATION GUARANTEEIf the wholesale customer receives the merchandise and notices a fault in the packaging or serious deterioration during the initial inspection, they should record the circumstances in the haulier’s delivery note and thus be able to return it immediately or at a date set by Kriket.
If faults are not noticed during the fi rst visual inspection but are du-ring a second check, they will have 20 days to be able to discuss this with Kriket and, once approved by Kriket, return it without charge.
GUARANTEE ON MATERIALSKriket guarantees that all of the technical components of the frame are free from rust during the 10 years of the guarantee, counting the start date of the guarantee as the manufacturing date shown on the goods delivery note, provided that they are not put in places with a high concentration of salt.
Likewise, the mounting kit, movement and guide are guaranteed against breaks for 10 years.
In the case of the kit, doors weighing more than 120 kilograms should not be used.
Regards,
Alberto Ibarrondo
4
Sin t tulo-1. traz 25/6/10 10:31 P gina 6
5
Single Rendered Structure
Sin t tulo-1. traz 25/6/10 10:31 P gina 7
Width in mm
Clearance span “P” Max. gap “L”
600 1350700 1550 800 1750900 1950
1000 21501100 23501200 25501300 27501400 29501500 3150
Height in mm
Clearance span “A” Max. gap “H”
2030 21402100 22102200 23102300 24102400 25102500 2610
Thickness in mmStructure
“S”Finished wall
“T” Max. leaf
55 90 4069 105 5591 125 58
116 150 75
Standard single leaf frame in diffe-rent widths, heights and thickness.
Optimum solution for places with space problems or for design rea-sons.
IMPORTANT NOTE:In frame structures of 55 and a finished wall of 90, the maximum thickness of the door has to be a total measurement of 40 mm to work properly
SPECIAL MEASUREMENTS:Please ask.
6
Sin t tulo-1. traz 25/6/10 10:31 P gina 8
7
Single Plaster Board Structure
Sin t tulo-1. traz 25/6/10 10:31 P gina 9
Structure prepared for constructions made with board and plaster.
Manufactured in different measure-ments depending on the needs of each environment
IMPORTANT NOTE :In frame structures of 55 and finished wall of 100, do not use doors which are more than 40 mm in thickness.
SPECIAL MEASUREMENTS :Please ask.
Width in mm
Clearance span “P” Max. gap “L”
600 1350700 1550 800 1750900 1950
1000 21501100 23501200 25501300 27501400 29501500 3150
Height in mm
Clearance span “A” Max. gap “H”
2030 21402100 22102200 23102300 24102400 25102500 2610
Thickness in mmStructure
“S”Finished wall
“T”Max. leaf thickness
55 100 4069 120 58
8
Sin t tulo-1. traz 25/6/10 10:31 P gina 10
9
Double Rendered Structure
For spaces of brick construction, when double sliding doors are needed to cover an extensive space.
IMPORTANT NOTE :In frame structures of 55 and finished wall of 90, do not use doors which are more than 40 mm in thickness.
SPECIAL MEASUREMENTS :Please ask.
Sin t tulo-1. traz 25/6/10 10:31 P gina 11
Width in mm
Clearance span “P” Max. gap “L”
1200 ( 600+ 600) 25601400 ( 700+ 700) 29601600 ( 800+ 800) 33601800 ( 900+ 900) 37602000 (1000+ 1000) 41602200 (1100+ 1100) 45602400 (1200+ 1200) 49602600 (1300+ 1300) 53602800 (1400+ 1400) 57603000 (1500+ 1500) 6160
Height in mm
Clearance span “A” Max. gap “H”
2030 21402100 22102200 23102300 24102400 25102500 2610
Thickness in mmStructure
“S”Finished wall
“T”Max. leafthickness
55 90 4069 105 5591 125 58
116 150 75
10
Sin t tulo-1. traz 25/6/10 10:31 P gina 12
11
Double Plaster Board Structure
Sin t tulo-1. traz 25/6/10 10:31 P gina 13
Double door structure for plaster board solu-tions being adapted to different measure-ments.
NOTA IMPORTANT :In frame structures of 55 and finished wall of 100, do not use doors which are more than 40 mm in thickness.
MESURES SPECIALES :Nous consulter.
Width in mm
Clearance span “P” Max. gap “L”
1200 ( 600+ 600) 25601400 ( 700+ 700) 29601600 ( 800+ 800) 33601800 ( 900+ 900) 37602000 (1000+ 1000) 40802200 (1100+ 1100) 44802400 (1200+ 1200) 48802600 (1300+ 1300) 52802800 (1400+ 1400) 56803000 (1500+ 1500) 6080
Height in mm
Clearance span “A” Max. gap “H”
2030 21402100 22102200 23102300 24102400 25102500 2610
Thickness in mmStructure
“S”Finished wall
“T”Max. leafthickness
55 100 4069 120 58
Sin t tulo-1. traz 25/6/10 10:31 P gina 14
Width in mm
Clearance span “P” Max. gap “L”
600 ( 300+ 300) 1050700 ( 350+ 350) 1200800 ( 400+ 400) 1350900 ( 450+ 450) 1500
1000 ( 500+ 500) 16501100 ( 550+ 550) 18001200 ( 600+ 600) 19501400 ( 700+ 700) 22501600 ( 800+ 800) 25501800 ( 900+ 900) 28502000 (1000+ 1000) 31502200 (1100+ 1100) 34502400 (1200+ 1200) 3750
Height in mm
Clearance span “A” Max. gap “H”
2030 21402100 22102200 23102300 24102400 25102500 2610
Thickness of plaster in mm
Structure “S” Finished wall “T”
116 150
Thickness of the plaster board
Structure “S” Finished wall “T
116 150
Structures that hold two doors in parallel, obtaining the space for opening and closing two leaves with a space for one leaf .
Parallel Rendered and Plaster Board Structure
13
Parallel Rendered and Plaster Board Double Structure
Sin t tulo-1. traz 25/6/10 10:31 P gina 15
Width in mm
Clearance span “P” Max. gap “L”
1200 ( 300x4) 19001400 ( 350x4) 22001600 ( 400x4) 25001800 ( 450x4) 28002000 ( 500x4) 31002200 ( 550x4) 34002400 ( 600x4) 37002600 ( 700x4) 40002800 ( 800x4) 43003000 ( 900x4) 4600
Height in mm
Clearance span “A” Max. gap “H”
2030 21402100 22102200 23102300 24102400 25102500 2610
Grosseur Carton Plâtre
Structure “S” Paroi finie “T”
116 150
Thickness of the plaster board
Structure “S” Finished wall “T
116 150
14
Sin t tulo-1. traz 25/6/10 10:31 P gina 16
15
Glass and Wood Doors” Runner Kit
Sin t tulo-1. traz 28/6/10 09:22 P gina 17 Sin t tulo-1. traz 28/6/10 09:22 P gina 17
Sin t tulo-1. traz 28/6/10 09:22 P gina 17
Sin t tulo-1. traz 28/6/10 09:22 P gina 17
Glass Runner Wall Tube Support
Tube Support Glass Coupling
Left Door Stop Master Key
Right Door Stop Wood Guide
Glass Guide Wood Runner
Tube Cap Sliding Tube Stainless Steel Tube Ø 25
16KRIKET ARMAZONES • Polígono Bakiola, Pabellón 60 • 48498-Arrankudiaga (Bizkaia)
Tels.: 94 452 51 23 • Fax: 94 452 27 68 • e-mail: [email protected] • www.kriket.es