2
© 2012 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY(800.272.3539) Fax: 262.253.4161 bradleycorp.com Page 1 of 2 This information is subject to change without notice. 2/21/2010 Security Fixtures Document No. 7165 • Strainer-less design allows for quick and efficient evacuation of debris • Large 2" diameter welded stainless steel P-trap • Flushing rim washes all four walls • All units factory tested for proper operation Specifications Materials All cabinet materials, including interior piping are Type 304 stainless steel. The fixture is made from heavy gauge stainless steel with seamless welded surfaces. Barrier-Free (ADA) and TAS Compliant Complies with ADA and TAS guidelines for urinals when mounted with front edge of the rim no more than 17" above the finished floor (3" lower than standard rough-in dimensions). Construction All welded construction with welds ground smooth to eliminate all accessible seams and voids. Urinal has blowout type action. Flushing connection is 1-1/2" NPS male and requires a minimum of 30 PSI for flushing. P-trap is stainless steel, has a 2-1/2" seal, and will pass a 1.9" ball. P-trap is welded to the urinal and has a 2" NPT connection. Urinal features a continuous flushing rim which washes all four walls. P-trap is fully enclosed and there are no accessible seams, voids, or crevices where contraband can be concealed. Urinal assembly meets ANSI/ASME A112.19.2. Flush Valve Flush valve is not included as standard equipment with the unit. Flush valve included when specified. Flush valve rated at 1.5 to 1.6 gallons per flush. Finish All exposed stainless steel surfaces have a bead blast finish (optional #4 satin polished finish). Wall Anchoring Fixture has four anchoring holes, and is furnished with 1/4-20 x 2" vandal-resistant screws and decorative countersunk washers. Suitable wall anchors furnished by others. URI8202FM URI8202FM Front-Mounted Stainless Steel Straddle Blowout Urinal *Touchtime ® requires use of transformer (24VAC) available from Bradley. (See separate Technical Info) Model Description URI8202FM Front-Mounted Stainless Steel Blowout Urinal Required Selections (Must select one from each category) Supply (select one): BACK Back Supply TOP Top Supply Finish (select one): BB Bead Blast (Standard) PS Polished Stainless Steel Flush Valve (select one): LCCPFV Low Consumption Chrome Plated Mechanical Flush Valve LCMFV Low Consumption Mechanical Flush Valve LCHFC Low Consumption Hydraulic Flush Valve LCTTFC* Low Consumption Touchtime ® Electronic Flush Valve NFV No Flush Valve

Front-Mounted Stainless Steel Straddle Blowout Urinal

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Front-Mounted Stainless Steel Straddle Blowout Urinal

© 2012 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309

Phone: 800.BRADLEY(800.272.3539) Fax: 262.253.4161bradleycorp.com

Page 1 of 2This information is subject to change without notice. 2/21/2010

Security Fixtures Document No. 7165

• Strainer-lessdesignallowsforquickandefficientevacuationofdebris• Large2"diameterweldedstainlesssteelP-trap• Flushingrimwashesallfourwalls• Allunitsfactorytestedforproperoperation

SpecificationsMaterialsAllcabinetmaterials,includinginteriorpipingareType304stainlesssteel.Thefixtureismadefromheavygaugestainlesssteelwithseamlessweldedsurfaces.

Barrier-Free (ADA) and TAS CompliantComplieswithADAandTASguidelinesforurinalswhenmountedwithfrontedgeoftherimnomorethan17"abovethefinishedfloor(3"lowerthanstandardrough-indimensions).

ConstructionAll welded construction with welds ground smooth to eliminate all accessible seamsandvoids.Urinalhasblowouttypeaction.Flushingconnectionis1-1/2"NPSmaleandrequiresaminimumof30PSIforflushing.P-trapisstainlesssteel,hasa2-1/2"seal,andwillpassa1.9"ball.P-trapisweldedtotheurinalandhasa2"NPTconnection.Urinalfeaturesacontinuousflushingrimwhichwashesallfourwalls.P-trapisfullyenclosedandtherearenoaccessibleseams,voids,orcreviceswherecontrabandcanbeconcealed.UrinalassemblymeetsANSI/ASMEA112.19.2.

Flush ValveFlushvalveisnotincludedasstandardequipmentwiththeunit.Flushvalveincludedwhenspecified.Flushvalveratedat1.5to1.6gallonsperflush.

FinishAllexposedstainlesssteelsurfaceshaveabeadblastfinish(optional#4satinpolishedfinish).

Wall AnchoringFixturehasfouranchoringholes,andisfurnishedwith1/4-20x2"vandal-resistantscrewsanddecorativecountersunkwashers.Suitablewallanchorsfurnishedbyothers.

URI8202FM

URI8202FMFront-Mounted Stainless Steel Straddle Blowout Urinal

*Touchtime® requires use of transformer (24VAC) available from Bradley. (See separate Technical Info)

Model Description URI8202FM Front-Mounted Stainless Steel Blowout Urinal

Required Selections (Mustselectonefromeachcategory)

Supply (select one): BACK Back Supply TOP Top Supply

Finish (select one): BB Bead Blast (Standard) PS Polished Stainless Steel

Flush Valve (select one):LCCPFV Low Consumption Chrome Plated Mechanical Flush ValveLCMFV Low Consumption Mechanical Flush ValveLCHFC Low Consumption Hydraulic Flush ValveLCTTFC* Low Consumption Touchtime® Electronic Flush ValveNFV No Flush Valve

Page 2: Front-Mounted Stainless Steel Straddle Blowout Urinal

© 2012 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309

Phone: 800.BRADLEY(800.272.3539) Fax: 262.253.4161bradleycorp.com

Page 2 of 2This information is subject to change without notice. 2/21/2010

Security Fixtures Document No. 7165

TOP VIEW

4"(102)

2-3/4"(70)

8"(203)

21-1/2"(546)

20"(508) *SeeADA/TASNote

FloodRimHeight

SIDE VIEW

18"(457)

12"(305)

4"(102)

ROUGH-IN DIMENSIONS (View Is from Fixture Side)

BackSupply:– ∅1-1/2"(38)MechanicalPushButton– ∅2"(51)Hydraulicor

TouchTimePushButton

4-3/4"(121)

TopSupply∅ 1-1/2"(38)

BackSupplyWallOpening8"(203)x4"(102)

10"(254)

21-1/2"(546)

1-1/2"(38)

23-1/2"(597)

FinishedFloor

WallAnchorsProvidedbyOthers

15-1/2"(394)

10"(254)

WasteWall Opening

4"(102)x4"(102)

16"(406) *SeeADA/TASNote

2-3/4"(70)

(mm)

* For ADA and TAS compliant mounting, subtract 3" from dimension shown.

URI8202FMFront-Mounted Stainless Steel Straddle Blowout Urinal