frontpaneler

Front panels, plug-in units type 2, HF plug-in units

Electronics Packaging www.schroff.biz

Overview ........... 0

Cabinets ............ 1

Wall mounted cases ............... 2

Accessories forcabinets and wallmounted cases .... 3

Climate control .... 4

Desk-top cases .... 5

Subracks/ 19" chassis ......... 6

Front panels, plug-in units ....... 7

Systems ............ 8

Power supply units ................ 9

Backplanes ....... 10

Connectors, front panel component system ............ 11

Appendix ......... 12

UK 04/20067.0

Übersicht PROLINE

Front panelsShielded/unshielded

Plug-in units, type 2

36106003

Buch für druck 060407.book Seite 0 Freitag, 7. April 2006 3:54 15

Front panels, plug-in units type 2, HF plug-in units

Electronics Packaging www.schroff.biz UK 04/2006 7.1

Drive units

HF plug-in units

Printed boards - Accessories

36106004

Overview .........7.0

Front panels .....7.2

Plug-in units,type 2 ........... 7.18

HF plug-in units ............. 7.62

Printed boards - Accessories .... 7.84

Assembly parts ............ 7.94

Drive unitsSee chapter Systems - Acessories . . . . . 8.60

Buch für druck 060407.book Seite 1 Freitag, 7. April 2006 3:54 15

Front panels


Overview ........... 0

Cabinets ............ 1







Systems ............ 8




Appendix ......... 12 Further important information can be found on the internet under www.schroff.biz

UK 04/20067.2

Front panels

04292001

32304003

Front panel express with drawing download

Standards Modification� IEC 60297-3-101 / IEEE 1101.1/11

Note

� Where finish is identified as being chromated this provides a conductive surface to maintain high le-vels of EMC shielding effectiveness

� Individual painting

� Customised cut-outs

� Printing

� Assembly service

� Special dimensions

Buch für druck 060405.book Seite 2 Mittwoch, 5. April 2006 4:19 16

Front panels


Front panels

Front panels for many applications� Extensive product range with different finishes

� Front panel express: Fast delivery service of customised versions

� EMC shielding retrofittable

� Material: Al 2.5 mm

Text

Text

Text

Front panels, unshielded

� Al, anodised

� Al, pre-anodised, untreated cut edge

� AI, front anodised, rear colourless chromated

04292001

Front panel shielded, flat� With lateral slots for the assembly of EMC stainless steel

contact strip

� Compatible to shielded U profile version

04600006

Front panels, shielded, U profile� With lateral groove retaining EMC textile gasket

� Compatible to shielded, flat version

� High stability through U profile

04602004

Further front panels� Bottom-hinged front panel

� Front panels with GND/earthing

� Mezzanine

� PC-MIP

Übersicht .........7.2

Front panels, unshielded .......7.4

Front panels, shielded .......... 7.5EMC stainless steelcontact strips . . . . . 7.6Assembly tool. . . . . 7.6

Front panels, shielded,U profile .......... 7.7EMC textile gasket . 7.8Front panel 1 U . . . 7.8

Further front panelsFront panel, bottom-hinged . . . .7.9For D sub connectors . . . . . . 7.11For coax connectors . . . . . . 7.113 U with GND/earthing connection . . . . . . 7.12Identification labels . . . . . . . . . 7.12Assembly kits . . . . 7.12Mezzaninefront panels . . . . . 7.13PC-MIP® Mezzanine front panels . . . . . 7.16

Buch für druck 060405.book Seite 3 Mittwoch, 5. April 2006 4:19 16

Front panels

Electronics Packaging www.schroff.biz7.4 UK 04/2006

04602051

2 HP � 2 HP

Front panels

� Front panel, Al, 2.5 mm

� Versions:- Al, anodised- Al, pre-anodised, untreated cut edges- Al, front anodised, rear colourless chromated

Note� Delivery may be in standard pack quantity:

Please order 5 pieces of 2 up to 28 HP, 1 piece of 42 up to 84 HP or a multiple. Pricing is per individual item.

� Please order assembly kit separately, see chapter assembly tools

1) This dimension is only available for version "Front anodised, rear colourless chromated"

Order Information

Front panels, unshielded

2.5

2.5

3

33

.3

HH

9.8

7.45 7.45 b2

b1

B

ø 5.9

Height Height Width B b1 b2 Pre-anodised, untreated cut edges

Anodised Front anodised, rear side colourless chromated

U mm HP mm mm mm Order no. Order no. Order no.2 84 84 426.4 411.5 203.2 30818-271 30807-416 30847-4613 128.4 2 9.8 – – 30810-433 30810-432 30847-4703 128.4 3 14.9 – – 30818-272 30807-508 30847-4713 128.4 4 20 – – 30818-273 30807-481 30838-0433 128.4 5 25 – – 30818-274 30807-510 30838-0443 128.4 6 30.1 – – 30818-275 30807-482 30838-0453 128.4 7 35.2 – – 30818-276 30807-509 30838-0463 128.4 8 40.3 25.4 1) – 30818-277 30807-484 30838-0473 128.4 10 50.5 35.6 – 30818-279 30807-483 30838-0493 128.4 12 60.6 45.7 – 30818-281 30807-485 30838-0513 128.4 14 70.8 55.9 – 30818-282 30807-501 30838-0533 128.4 21 106.3 91.4 – 30818-289 30807-487 30838-0603 128.4 28 141.9 127 – 30818-296 30807-496 30838-0673 128.4 42 213 198.1 101.6 1) 30818-310 30807-494 30838-0813 128.4 63 319.7 304.8 157.5 30818-331 30808-067 30838-1023 128.4 84 426.4 411.5 203.2 30818-352 30807-506 30838-1234 172.9 42 213 198.1 – – – 30847-4634 172.9 63 319.7 304.8 157.5 – – 30847-4644 172.9 84 426.4 411.5 203.2 30818-434 30807-596 30847-4656 261.8 2 9.8 – – 30818-747 30818-741 30847-4726 261.8 4 20 – – 30818-518 – 30838-1246 261.8 5 25 – – – – 30838-1256 261.8 6 30.1 – – – – 30838-1266 261.8 7 35.2 – – – – 30838-1276 261.8 8 40.3 – – 30818-522 – 30838-1286 261.8 10 50.5 35.6 – 30818-524 30807-753 30838-1306 261.8 12 60.6 45.7 – 30818-526 – 30838-1326 261.8 14 70.8 55.9 – 30818-528 30807-758 30838-1346 261.8 16 80.9 66 – 30818-530 – 30838-1366 261.8 21 106.3 91.4 – 30818-535 30807-757 30838-1416 261.8 28 141.9 127 – 30818-542 30807-766 30838-1486 261.8 42 213 198.1 101.6 1) 30818-556 30807-764 30838-1626 261.8 63 319.7 304.8 157.5 30818-577 30807-771 30838-1836 261.8 84 426.4 411.5 203.2 30818-598 30807-776 30838-2049 395.1 4 20 – – – – 30847-4769 395.1 8 40.3 25.4 – – – 30847-4809 395.1 10 50.5 35.6 – – – 30847-4829 395.1 12 60.6 45.7 – – – 30847-4849 395.1 84 426.4 411.5 203.2 – – 30847-556

Buch für druck 060404.book Seite 4 Dienstag, 4. April 2006 5:13 17

7.5UK 04/2006Electronics Packaging www.schroff.biz

Front panels

04602052

Front panels

� Shielding with EMC stainless steel contact strip (please order separately)

� Front panel, Al, 2.5 mm, front anodised, rear colourless chromated

Order Information


Please order 5 pieces for 2 up to 28 HP, 1 piece for 42 up to 84 HP or a multiple. Pricing is per individual item.

� Please order assembly kit separately, see page 7.94� Please order EMC stainless steel seal contact strips separately,

see page 7.6

Front panel, shielded

3.3

2.5

52

.5

3

H

10

.70

.65

1 2.5

9.8

7.45

M 2.5

1.8

1.8

R 11

B

b1

b27.45

X

X

X

Y

Y

Y

3

H

ø 5.9

ø 2.5

5.08

Height Height Width B b1 b2 Alignment pin

Order no.

U mm HP mm mm mm2 84 84 426.4 411.5 203.2 – 30846-5883 128.4 2 9.8 – – – 30846-8643 128.4 3 14.9 – – x 20846-4253 128.4 4 20 – – x 20846-4263 128.4 5 25 – – x 20846-4273 128.4 6 30.1 – – x 20846-4283 128.4 7 35.2 – – x 20846-4293 128.4 8 40.3 25.4 – x 20846-4303 128.4 10 50.5 35.6 – x 20846-4313 128.4 12 60.6 45.7 – x 20846-4323 128.4 14 70.8 55.9 – x 20846-4333 128.4 21 106.3 91.4 – x 20846-4343 128.4 28 141.9 127 – x 20846-4363 128.4 42 213 198.1 101.6 x 20846-4373 128.4 63 319.7 304.8 157.5 x 20846-4383 128.4 84 426.4 411.5 203.2 – 30846-6764 172.9 42 213 198.1 – – 30846-6814 172.9 63 319.7 304.8 157.5 – 30846-6824 172.9 84 426.4 411.5 203.2 – 30846-6836 261.8 2 9.8 – – – 30846-8656 261.8 4 20 – – x 20846-4436 261.8 5 25 – – x 20846-4446 261.8 6 30.1 – – x 20846-4456 261.8 7 35.2 – – x 20846-4466 261.8 8 40.3 25.4 – x 20846-4476 261.8 10 50.5 35.6 – x 20846-4486 261.8 12 60.6 45.7 – x 20846-4496 261.8 14 70.8 55.9 – x 20846-4506 261.8 16 80.9 66 – x 20846-4566 261.8 21 106.3 91.4 – x 20846-4516 261.8 28 141.9 127 – x 20846-4526 261.8 42 213 198.1 101.6 x 20846-4536 261.8 63 319.7 304.8 157.5 x 20846-4546 261.8 84 426.4 411.5 203.2 – 30846-7719 395.1 84 426.4 411.52 203.2 – 30846-859

For further information www.schroff.biz/oneclickoneClick code = Order no.


Front panels


BGA45760

Assembly tool

aza45937

Front panels

� EMC stainless steel contact strips are inserted into the lateral slots of the shielded front panels

Delivery comprises

Order Information

Note� Please order assembly tool separately

EMC stainless steel contact strips

Item Qty Description1 1 / 100 EMC contact strip, stainless steel

Height Height Qty / PU Order no.U mm2 52 10 21101-7752 52 100 21101-7763 97 10 21101-7053 97 100 21101-7064 142 10 21101-7134 142 100 21101-7146 232 10 21101-7076 232 100 21101-7089 367 10 21101-7099 367 100 21101-710Assembly tool For EMC stainless steel contact strip (front panel with slot), 1 piece

24560-270




Front panels

2 HP 3 HP

04602053

Front panels

� High stability (U profile)

� Front panel U profile, Al, front anodised,rear conductive, 2 pressed in alignment pins, stainless steel

Order Information


Please order 5 pieces for 2 up to 28 HP, 1 piece for 42 up to 84 HP or a multiple. Pricing is per individual item.

� Please order assembly kit separately, see on the Internet� Please order EMC textile gasket separately, see page 7.8

Front panels, shielded, U profile

3.3

3.3

2.5

2.5

2.5

3 3

H H

9.8 14.9

7.457.45

5.08 5.08

B

B - 2.53

b1

b27.45

YY

XX

YZ

Z Y

3

H

ø 5.9

ø 5.9

5.08

6.2

6.2

5 2.5

ø 2.5

2.5

Height Height Width B b1 b2 Alignment pin

Order no.U mm HP mm mm mm2 84 84 426.4 411.5 203.2 – 20848-2623 128.4 2 9.8 – – x 30849-0013 128.4 3 14.9 – – x 30849-0043 128.4 4 20 – – x 30848-3543 128.4 5 25 – – x 30848-3783 128.4 6 30.1 – – x 30848-3803 128.4 7 35.2 – – x 30848-3823 128.4 8 40.3 25.4 – x 30848-3563 128.4 10 50.5 35.6 – x 30848-3863 128.4 12 60.6 45.7 – x 30848-3583 128.4 14 70.8 55.9 – x 20848-0133 128.4 21 106.3 91.4 – x 20848-0203 128.4 28 141.9 127 – x 20848-0273 128.4 42 213 198.1 101.6 x 20848-0473 128.4 63 319.7 304.8 157.5 x 20848-0683 128.4 84 426.4 411.5 203.2 – 20848-0974 172.9 28 141.9 127 – – 20848-2684 172.9 42 213 198.1 – – 20848-2694 172.9 63 319.7 304.8 157.5 – 20848-2704 172.9 84 426.4 411.5 203.2 – 20848-2716 261.8 2 9.8 – – x 30849-0026 261.8 4 20 – – x 30848-3556 261.8 5 25 – – x 30848-3796 261.8 6 30.1 – – x 30848-3816 261.8 7 35.2 – – x 30848-3836 261.8 8 40.3 25.4 – x 30848-3576 261.8 10 50.5 35.6 – x 30848-3876 261.8 12 60.6 45.7 – x 30848-3596 261.8 14 70.8 55.9 – x 20848-1066 261.8 16 80.9 66 – x 20848-1086 261.8 21 106.3 91.4 – x 20848-1136 261.8 28 141.9 127 – x 20848-1206 261.8 42 213 198.1 101.6 x 20848-1396 261.8 63 319.7 304.8 157.5 x 20848-1606 261.8 84 426.4 411.5 208.3 – 20848-1899 395.1 84 426.4 411.5 203.2 – 20848-280



Front panels


pozidrive

04602054

Front panels

Delivery comprises (kit)

Order Information

04602055

Front panel

Delivery comprises

Order Information

EMC textile gasket

Item Qty Description1 10 / 100 EMC textile gasket,

core: foam, sleeve: textile cover with CuNi coating

Height Height Qty / PU Order no.U mm3 97 10 21101-8533 97 100 21101-8546 232 10 21101-8556 232 100 21101-856


Front panel 1 U

Item Qty Description1 1 Front panel, Al, 2.5 mm,

front anodised, rear colourless chromated

Width A B C Order no.HP mm mm mm28 141.9 127.0 – 20850-42342 213.0 196.1 101.6 20850-42463 319.7 304.8 157.5 20850-42584 426.4 411.5 203.2 20850-426




Front panels

04295001

Unshielded

04602080

Shielded

04602079

Front panels

� For subracks and cases, can be unhinged at 135° (subracks, ratiopacPRO, propac cases)

� Usable width is not restricted

� Assembly on horizontal rails

� 2 versions:– Unshielded– Shielded, U front panel with EMC textile gasket

Note� Unshielded: Dimension C only for 84 HP


Order Information

Front panel, bottom-hinged

X Y

2.5

2.5

6.2

6.2

X Y

A

B

C

3.1

3 M2.5

15.6 16

D

B - 25.4

8.2

32

.5

7.45

ø5.9 x 3.3

H

Item Qty Descriptionunshielded shielded

1 1 - Front panel, bottom-hinged, Al, 2.5 mm anodised, cut edges untreated

1a - 1 Front panel, bottom-hinged, Al, 2.5 mm, front anodised, rear colourless chromated

2 2 3 Hinge, Zn die-cast, nickel-plated3 2 3 Sleeve, PA4 2 3 Knurled screw M2.5 x 12.3, St,

nickel-plated5 - 1 EMC textile gasket

core: foamsleeve: textile cover with CuNi coating

6 1 1 Assembly kit

Dimensions Shielded UnshieldedHeight Width A B C D H Order no. Order no.U HP mm mm mm mm mm3 28 141.9 127 – – 128.4 20848-608 20838-2803 42 213 198.1 101.6 86.36 128.4 20848-599 20838-2713 63 319.7 304.8 157.5 137.16 128.4 20848-600 20838-2723 84 426.4 411.5 203.2 193.04 128.4 20848-601 20838-2734 42 213 198.1 101.6 86.36 172.9 20848-605 20838-2774 63 319.7 304.8 157.5 137.16 172.9 20848-606 20838-2784 84 426.4 411.5 203.2 193.04 172.9 20848-607 20838-2796 42 213 198.1 101.6 86.36 261.8 20848-602 20838-2746 63 319.7 304.8 157.5 137.16 261.8 20848-603 20838-2756 84 426.4 411.5 203.2 193.04 261.8 20848-604 20838-276


Front panels


04295002

04602081

Front panels

� For subracks and cases

� Assembly on horizontal rails

� Shielded, U front panel with EMC textile gasket

� Usable width reduced by 2 HP (hinged side)

� Hinges can be assembled on the left or right


Order Information

Front panel, hinged, shielded

YX

X

2.5

2.5

6.2

6.2

X Y

ø 2.5

2 TE

B

90°

180°

Item Qty Description1 1 Front panel, hinged, Al, 2.5 mm, front anodised,

rear colourless chromated2 2 Hinge, Zn die-cast, chrome-plated3 1 EMC textile gasket

core: foam, sleeve: textile cover with CuNi coating4 1 Assembly kit

Dimensions For europacPROratiopacPRO

Height B b H h Order no.U mm mm mm mm3 426.4 203.2 128.4 89.9 20848-6116 426.4 203.2 261.8 223.2 20848-617




Front panels

04602056

Front panels

� 3 U/4 HP

� Al, front anodised, rear colourless chromated

� Shielding with EMC stainless steel contact strip (please order separately)

Order Information

Delivery may be in standard pack quantity: Please order 5pieces or a multiple. Pricing is per individual item.

Note� Please order assembly kit separately, see page 7.17

� Shielding through EMC stainless steel contact strips possible, see page 7.6

04602057

Front panels

� 3 U/4 HP

� Front anodised, rear colourless chromated

Order Information

Note� Please order assembly kit separately, see page 7.17

� Shielding through EMC stainless steel contact strips possible, see page 7.6

Front panels for D-sub connectors

10.7

1.8

R 11

X

0.6

5

1 2.5

1.8

Cut-out Unshielded Prepared for EMC shielding

Order no. Order no.1 × 9-pin 30118-341 30118-3482 × 9-pin 30118-344 30118-3513 × 9-pin 30118-347 30118-3541 × 15-pin 30118-342 30118-3492 × 15-pin 30118-345 30118-3521 × 25-pin 30118-343 30118-3502 × 25-pin 30118-346 –2 × 25-pin – 30118-353


Front panels for Coax connectors

Description Qty / PU Order no.4 x Coax, unshielded 1 30118-3554 x Coax, prepared for EMC shielding 1 30118-356



Front panels


02998001

Front panels

� Earthed front panel (class of protection 1)

Delivery comprises (items 1 – 3 assembled)

Order Information

Note� Delivery may be in Standard Pack Quantity: Please order

5 pieces for 7 up to 28 HP, 1 piece for 42 HP or a multiple. Pricing is per individual item

Front panels

Order Information

Front panels 3 U with GND/earthing connection

Item Qty Description1 1 Front panel 3 U, Al, 2.5 mm, front anodised,

rear colourless chromated with GND/earthing connection

2 4 Plastic sleeve, PA, grey3 4 Collar screw M 2.5 x 11 and 12.3 Pozidrive,

St nickel-plated4 1 GND/earthing kit, GND/earth cable, length 320 mm

Height Width Order no.U HP3 7 20119-1593 14 20119-1603 21 20119-1613 28 20119-1623 42 20119-163


Identification labels for front panels

Qty / PU Description Order no.

10Identification label 220 x 10 mm, white, transparent plastic sleeve, self-adhesive

60119-356


Assembly kit for front panels

For assembly of front panels on subracks or cases, various screws and washers are available, see page 7.94



Front panels

MPA44845

Front panels

� PMC= PCI Mezzanine Card

� For module size 149 x 74 mm2

� In accordance with specification IEEE P1386 (CMC= Common Mezzanine Card)

� 6 U / 4 HP front panel with EMC gasket and front handles

� With 1 or 2 cut-outs

Delivery comprises (assembled)

Order Information

Mezzanine front panels

� Based on PCI 2.2 specification (PCI = Peripheral Component Interface)

� In accordance with PMC Mezzanine specification IEEE P 1386

� In accordance with PC-MIP Mezzanine specification VITA-29

MPA44437

PMC Mezzanine plug-in units

5

3 b

6

3 a

Item Qty Description3 1 PMC front panel, Al, 6 U , 4 HP, colourless chromated5 2 EMC gasket6 2 Front handle

Item Description Order no.3a Front panel with 1 cut-out 20897-9513b Front panel with 2 cut-outs 20897-950



Front panels


MPA44847

Front panels

Order Information

Delivery may be in Standard Pack Quantity: Please order 10 pieces or a multiple. Pricing is per individual item.

MPA44846

Front panels


Order Information

EMC cover for PMC Mezzanine front panel cut-outs

9

3

71.5

73.7

4.1

15.1

12.9

Material Colour Qty / PU Order no.Stainless steel, 0.2 mm

black 1 60835-024

Stainless steel, 0.2 mm

bright 1 60835-022


PMC Mezzanine front panels

4

7

M 2.5

12.7

9.9

10.9

7469.5

12.0

2.252.5

Item Qty Description4 1 PMC-Mezzanine-front panel, Zn die-cast or

Al extrusion7 1 EMC gasket (O-ring), Cho-Seal

PMC-Mezzanine front panels Qty / PU With EMC gasket

Without EMC

gasketMaterial Order no. Order no.Al profile, anodised, contact area conductive

1 20835-598 –

Al profile, anodised, contact area conductive

10 20835-889 20835-899

Zn, die-cast , raw 1 20835-890 –Zn, die-cast, raw 10 20835-893 20835-896Zn, die-cast, black, chrome-plated 1 20835-891 –Zn, die-cast, black, chrome-plated 10 20835-894 20835-898Zn, die-cast, chrome-plated, matt 1 20835-892 –Zn, die-cast, chrome-plated, matt 10 20835-895 20835-897Cheesehead screw M2.5 × 5 mm, PU 100 pieces 21100-624EMC sealing O-ring, 1 piece (Standard Pack Quantity 10 pieces)

60835-021




Front panels

MPA44850

Front panels

Order Information


MPZU6325

Front panels

� To prevent confusion on installation of Mezzanine boards, keying/coding pins are screwed onto the VMEbus boards for 3.3 V or 5 V operation. The Mezzanine boards have a drilled hole at the corresponding position. The keying/coding pin thus ensures that only Mezzanine boards with the same voltage compatibility are inserted. 2 pieces are necessary for double boards.

Order Information


Spacer for assembly of PMC Mezzanine boards

5

5.8 10

M 2.5

Description Item Material Qty / PU Order no.

Spacer 10 St, zinc-plated 1 60897-278


Voltage keying/coding pin for PMC Mezzanine boards

5

5

7

13.55.8

M 2.5

Description Item Material Qty / PU Order no.

Keying/coding pin 5 V/3.3 V

11 St, zinc-plated 1 60827-026



Front panels


12101501

12102050

Front panels

� For module size 47 x 90 mm2

� In accordance with PC-MIP® / VITA-29

� Front profile in 3 and 6 U height and 4 HP width

� With either single or double high cut-outs

� For IEEE handle

Delivery comprises

Order Information


� Handle, see chapter plug-in units with extraction handle in accordance with IEEE

� EMC textile gasket, see page 7.8

PC-MIP® Mezzanine front panels

17.45 17.4517.45

0.9 0.90.9

14.6 14.6

14.6

14.6

19.98 19.98 19.98

6.2

6.2

6.2

5 5

ø2.5 ø2.5

5.08 5.087.45 7.45

115.2

115.2

235.4

40.6

81

81

81

R1

R1

R1

R1

Item Qty Description3 1 Front panel for PC-MIP®,

front anodised, rear conductive chromated

Height Description Order no.U3 Single with single cut-out 30848-9583 Dual with double cut-out 30848-9596 Dual with two double cut-outs 30848-960




Front panels

04603065

12102502

CPCI6188

12102503

Front panels

� PC-MIP® front panel covers for I/O cut-outs of the front panels

� Single and double high covers


Order Information

Note� For a double cut-out, either a dual cover and a PCB holder or two

single covers and two PCB holders are required

Order Information

Front panels


Order Information

PC-MIP® covers

Item Qty Description4 1 PC-MIP® cover, Al profile, colourless chromated5 1 PCB holder, Al profile, colourless chromated8 1 EMC sealing strip, star-shaped, silicone, AG

Description Qty / PU Order no.Cover single, single height 10 20847-024Cover dual, double height 10 20847-026


Assembly kits

Item Description Qty / PU Order no.

6Pozidrive pan head screw M2.5 × 6 mm, nickel-plated

100 21101-219

6aPan head screw with torx, M2.5 × 6 mm, zinc-plated, thread self-locking

100 24560-159

Assembly kits for PC-MIP® H modules

DescriptionSpacerBoltsSpring washerRetention washer

Description Qty / PU Order no.8 H, single module 1 21101-89710 H, single module 1 21101-8988 H, double module 1 21101-89910 H, double module 1 21101-900


Plug-in units


Overview ........... 0

Cabinets ............ 1







Systems ............ 8




Appendix ......... 12 Further important information can be found on the internet under www.schroff.biz

UK 04/20067.18

Plug-in units as kit or individual parts� Front handles in different designs

� Upgradable EMC shielding

04603001

Standards Modifications� IEC 60297-3-101 / IEEE 1101.1/11

IEC 60297-3-102 / IEEE 1011.10 IEC 60297-3-103

Note:Where finish is identified as being chromated this provides a conductive surface to maintain high levels of EMC shielding effectiveness.

� Individual painting

� Customised cut-outs

� Printing

� Mounting service

� Special dimensions


Plug-in units


Handle type for plug-in units Kit Individual partPage Page

CompactPCI / VME64x 7.20 7.21

04603002

Heavy load extractor handle XL – 7.31

04605005

Insertion / extractor handle for plug-in units, type 2

7.33 7.35

04604059

Extractor handle for plug-in units, type 2

7.36 7.39

04692008

Multibus® II 7.41

04692011

Key form 1 – 7.44

04692008

Key form 2 – 7.47

04692010

Plug-in units with static handle 7.50 7.52

04692003

Plug-in units with static handle and mechanical protection

7.58 –

04692004

Overview ....... 7.18

Plug-in units with insertion and extractor handle

For CompactPCI- / VME64x applications . . . . . 7.20

Heavy load extractor handle XL . . . . . . 7.31

Plug-in units with insertion / extractor handle, type 2 . . . . . . . . . 7.33

Plug-in units extractor handle,type 2 . . . . . . . . 7. 36

Multibus® II individual parts . . 7.41

Extractor handle in key form 1 . . . . 7.44

Extractor handle in key form 2 . . . . 7.47

Plug-in units with fixed handle

Plug-in units with static handle. . . . . 7.50

Plug-in units with statichandle and mechanical protection . . . . . . 7.58


Plug-in units


3 U

04602073

6 U

04602074

� In accoradance with IEEE 1101.10

� Shielded

� Suitable for insertion and extraction forces up to 700 N (per pair)

� Suitable for assembly of micro switches


Order Information

� Dimensions of front profile, see page 7.21

� Micro switch, see page 7.29

Plug-in units with handles for CompactPCI/ VME64x applications (kit)

Item Qty Description3 U 6 U

�8 HP �8 HP �8 HP �8 HP1 1 1 1 1 U front profile, AI,

front anodised, rear chromated2 1 1 1 1 EMC textile gasket, core: foam,

sleeve: textile cladding, CuNi coating

3 1 1 2 2 Handle with integrated alignment pin for perforated strip and guide rails, lever: plastic PC, black, RAL 9005, key: plastic PC, light grey, RAL 7035

4 1 1 - - Printed board bracket, Zn die-cast5 1 1 - - Raised Pozidrive c/sk screw

M2.5 × 8, St, nickel-plated6 1 3 - 2 Sleeve, PA, grey7 2 4 2 4 Pozidrive collar screw

M 2.5 × 12.3, nickel-plated8 2 2 2 2 Pan head screw with Torx

M 2.5 × 6, St, zinc-plated, self-locking

9 2 2 2 2 Washer A 2.7, St, nickel-plated10 1 1 2 2 Pan head screw with Torx,

M 2.5 × 6, St, nickel-plated

Height Width Order no.U HP3 4 20848-5853 6 20848-5873 8 20848-5893 10 20848-5903 12 20848-5916 4 20848-5926 6 20848-5946 8 20848-5966 10 20848-5976 12 20848-598Micro switch for handle, CompactPCI / VME64x applications 1 piece

20817-606




Plug-in units

04602075

HE = U, TE = HP

Delivery comprises

Order Information

Delivery may be in Standard Pack Quantity: Please order 5pieces or a multiple. Pricing is per individual item.

� Please order EMC textile gasket (item 2) separately, see page 7.22

� 3 U panel for rear I/O applications, see page 7.22

Plug-in units with IEEE handles (individual parts)

Front panel for IEEE handle, shielded

Item Qty Description1 1 U front profile, Al, front anodised,

side and rear chromated at 4 ... 8, 10, 12 HP;side raw, rear colourless chromated at 9, 11, 14 and 16 HP

3 1 Alignment pin, pressed in (only for 3 U), stainless steel

Width b c d 3 U 6 UHP mm mm mm Order no. Order no.4 19.98 17.43 – 30848-312 30848-3175 25.06 22.53 – 30848-300 30848-3046 30.14 27.61 – 30848-313 30848-3187 35.22 32.69 7.45 30848-301 30848-3058 40.3 37.77 7.45 30848-314 30848-3199 45.38 42.85 7.45 20848-227 20848-24310 50.46 47.93 7.45 30848-315 30848-32011 55.54 53.01 7.45 20848-228 20848-24412 60.64 58.09 7.45 30848-316 30848-32114 70.78 68.25 7.45 20848-230 20848-24616 80.94 78.41 7.45 20848-232 20848-248



Plug-in units


04602050

� Rear I/O for 3 U 32-bit CompactPCI systems

� Use with IEL and IET handles possible

Order Information

Delivery may be in Standard Pack Quantity: Please order 5 pieces U profiles or a multiple. Pricing is per individual item.

Note� Rear I/O panel for offset available on request

04602083

� The profil gasket is stuck onto the front panels on the right hand side

Delivery comprises

Order Information

U profile panel for 3 U rear I/O

Height Width b Description Qty / PU Order no.U HP mm

3 4 19.98U profile panel, Al, front anodised, rear chromated

1 30848-867


1 30848-869


1 30848-985

EMC textile gasket 3 U, PU 10 pieces 21101-853


EMC profile gasket

Item Qty Description1 1 EMC profile gasket,

core: foam, sleeve: textile cladding with CuNi coating

Height Qty / PU Order no.U3 10 21101-8533 100 21101-8546 10 21101-8556 100 21101-856



Plug-in units

BGA46308

HE = U, TE = HP

Delivery comprises

Order Information


BGA4631104603059


� With locking



Order Information


Front panel for IEEE handle, unshielded

Item Qty Description1 1 Front panel, Al, 2.5 mm, front anodised,

rear colourless chromated

Width b d 3 U 6 UHP mm mm Order no. Order no.4 20.32 – 30848-327 30848-3365 25.4 – 30848-328 30848-3376 30.48 – 30848-329 30848-3387 35.56 – 30848-330 30848-3398 40.64 7.45 30848-331 30848-34010 50.8 7.45 30848-333 30848-34212 60.96 7.45 30848-335 30848-344

IEEE handle, version IEL

Item Qty Description1 1 Zn die-cast with integrated alignment pin for perforated

strip and IEEE 1101.10 guide rail2 1 Lever, plastic PC, UL 94 V-03 1 Key, plastic PC, UL 94 V-04 1 Pozidrive collar screw, M2.5 × 12.3, St, nickel-plated5 1 Pan head screw with Torx, M2.5 × 7, St,

nickel-plated

Description Qty / PU At the bottom

At the top

Order no. Order no.Lever: light grey, RAL 7035 Key: black, RAL 9005

10 20817-620 20817-622

Lever: light grey, RAL 7035 Key: black, RAL 9005

100 20817-621 20817-623

Lever: black, RAL 9005 Key: light grey, RAL 7035

10 20817-612 20817-614


100 20817-613 20817-615

Micro switch for handle, CompactPCI / VME64x applications 1 piece

20817-606


Plug-in units


BGA46313

04603060

� For telecom applications

� With locking




Order Information


IEEE handle, version IET

Item Qty Description1 1 Zn die-cast with integrated alignment pin for perforated

strip and IEEE 1101.10 guide rail2 1 Lever, plastic PC, UL 94 V-03 1 Key, plastic PC, UL 94 V-04 1 Pozidrive collar screw, M2.5 × 12.3, St, nickel-plated5 1 Pan head screw with Torx, M2.5 × 7, St,

nickel-plated


At the top


10 20817-660 20817-662


100 20817-661 20817-663


10 20817-652 20817-654


100 20817-653 20817-655


20817-606




Plug-in units

04601502

TE = HP

Delivery comprises

Order Information


� Please order EMC textile gasket (item 2) separately, see page 7.22

Front panel for IEEE handle, 3 U with 0.1" offset, shielded

Item Qty Description1 1 U profile, Al, front anodised, side and rear chromated

at 4 ... 8 HP, 10, 12 HP; side raw, rear colourless chromated 9, 11, 14 and 16 HP

3 1 Alignment pin, St, for alignment via perforated strip

Width b c d Order no.HP mm mm mm4 19.98 17.45 – 30848-4265 25.06 22.53 – 30848-4276 30.14 27.61 – 30848-4287 35.22 32.69 – 30848-4298 40.3 37.77 7.45 30848-43010 50.46 47.93 7.45 30848-43112 60.64 58.09 7.45 30848-432



Plug-in units


04602076

TE = HP

Delivery comprises

Order Information


� Please order EMC textil gasket (item 2) separately, see page 7.22

� 3 U profile plate for rear I/O applications, see page 7.22

Front panel for IEEE handle, 6 U, with 0.1" offset, shielded

Item Qty Description1 1 U profile, Al, front anodised, side and rear chromated at

4 ... 8 HP, 10, 12 HP; side raw, rear colourless chromated 9, 11, 14 and 16 HP

Width b c d Order no.HP mm mm mm4 19.98 17.43 – 30848-3175 25.06 22.53 – 30848-3046 30.14 27.61 – 30848-3187 35.22 32.69 – 30848-3058 40.3 37.77 7.45 30848-3199 45.38 42.85 7.45 20848-24310 50.46 47.93 7.45 30848-32011 55.54 53.01 7.45 20848-24412 60.64 58.09 7.45 30848-32114 70.78 68.25 7.45 20848-24616 80.94 78.41 7.45 20848-248




Plug-in units

BGA46311

04603061


� With locking



Order Information


IEEE handle, version IEL with 0.1" offset

Item Qty Description1 1 Zn die-cast with integrated alignment pin for

perforated strips and IEEE 1101.10 guide rail2 1 Lever, plastic PC, UL 94 V-03 1 Key, plastic PC, UL 94 V-04 1 Pozidrive collar screw, M2.5 × 12.3, St, nickel-plated5 1 Pan head screw with Torx, M2.5 × 7, St,

nickel-plated


At the top


10 20817-690 20817-692


100 20817-691 20817-693


10 20817-682 20817-684


100 20817-683 20817-685


20817-606



Plug-in units


BGA46313

04603062

� For telecom applications

� With locking




Order Information


IEEE handle, version IET with 0.1" offset

Item Qty Description1 1 Zn die-cast with integrated alignment pin for

perforated strips and IEEE 1101.10 guide rail2 1 Lever, plastic PC, UL 94 V-03 1 Key, plastic PC, UL 94 V-04 1 Pozidrive collar screw, M2.5 × 12.3, St, nickel-plated5 1 Pan head screw with Torx, M2.5 × 7, St,

nickel-plated


At the top


10 20817-714 20817-716


100 20817-715 20817-717


10 20817-706 20817-708


100 20817-707 20817-709


20817-606




Plug-in units

BGA46314

BGA46315

Order Information

Technical data

Note� Mating connector not included in delivery. Mating connectors

from Molex e.g. 53261-0319, 53048-0310, 53047-0310, 53398-0319, 51047-0300.

BGA46316

� The coding pegs (3 pieces each) are inserted into the coding block or the handle

Order Information

� Guide rails for coding, see chapter Subracks - europacPRO, page 6.58

BGA4631704606050

Order Information

Micro switch for handle, CompactPCI / VME64x applications

Description Qty / PU Order no.Micro switch with cable, connector (item 1, Molex connector housing 51021-0300, Molex crimp contact 50058-8000)

10 20817-606

Max. switched current � 50 mAOperating temperature – 25 °C to + 70 °CMechanical life � 50000 switching cyclesElectrical life � 20000 switching cycles

Coding for handle, CompactPCI / VME64x applications

Description Qty / PU Order no.Coding pegs, PC, UL 94 V-0, grey, RAL 7035 100 20817-501

Identification labels for handle, CompactPCI / VME64x applications

1

2

Item Description Material Colour Order no.

1PU 1 sheet (210 pieces, 19 x 9.5 mm)

Polyester film, self-adhesive

White 60817-340

2PU 1 sheet (320 pieces, 19 x 4.8 mm)

Polyester film, self-adhesive

White 60817-341



Plug-in units


BGA46318

� Allows the side-by-side assembly of 2, 3 or 4 as one unit

� For IEL handles

Delivery comprises

Order Information

BGA46045

� Please find the quantity of required assembly parts in the table below

Order Information

Side-by-side kit for handles

Item Qty Description1 10 Side-by-side mounting kit, plastic (PC), UL 94 V-0,

RAL 7035 light grey, pin: steel

Description Order no.Side-by-side mounting kit for 2 handles 20817-672Side-by-side mounting kit for 3 handles 20817-673Side-by-side mounting kit for 4 handles 20817-674


Assembly kit

7 / 7a

6

5 / 5a

4

1

3 / 3a

Item Description Application Quantity required Qty / PU Order no.3 U 6 U� 8 HP � 8 HP � 8 HP � 8 HP

1 Mounting block Zn die-cast – 1 1 – – 1 60807-181

3Pan head Pozidrive c/sk screw

M2.5 × 6, St, nickel-plated – 2 2 2 2 100 21101-219

3a Pan head screw with Torx M2.5 × 6, St, zinc-plated Self-securing thread 2 2 2 2 100 24560-1594 Washer 2.7, St, nickel-plated – 2 2 2 2 100 21100-7215 Raised Pozidrive c/sk screw M2.5 × 8, St, nickel-plated – 1 1 – – 100 21100-4295a Pan head screw with Torx M2.5 × 8, St, nickel-plated – 1 1 – – 100 24560-1646 Pozidrive collar screw M2.5 × 2.3, St, nickel-plated – 1 3 – 2 100 21101-1017 Sleeves, plastic PA, grey For unshielded front panels 1 3 – 2 100 21100-464

7aSleeve, metal, for press fitting

St, stainless steel For shielded front panels 1 3 – 2 100 21100-662



Plug-in units

04605008

04605050

04605051


� Symmetrical, handle at the top and bottom

� With screw locking

� For shielded front panels


Delivery comprises

Order Information

� Front panel, see page 7.32� Micro switch, see page 7.32

Heavy load extractor handle XL

10

3,6

5,6

2

*

7

6

1

*

1

5

2

2

4

3

6

Item Qty Description1 1 Zn die-cast, with retainer for micro switches2 1 Lever, plastic, PC, black3 1 Zn die-cast, guide block4 1 Collar screw with Torx, M2.5 x 12.3, St, nickel-plated5 1 Countersunk screw with Torx, M2.5 x 17, St, nickel-plated6 1 Cheesehead screw with Torx, M2.5 x 7, St, nickel-plated

Description Qty / PU Order no.Heavy load extractor handle XL 10 20817-874Micro switch for XL handle with cable, grub screw, PU 10 pieces

20817-877



Plug-in units


04605005

6 U / 4 HP 6 U / 8 HP 6 U / 12 HP

046050530460505504605054

Heavy duty

Delivery comprises

Order Information


Note� Please order EMC textile gasket and micro switch separately� Description XL handle, see page 7.31� Micro switch, see page 7.32

04605052

Order Information

Technical Data

Note� Mating connector not included in delivery. Mating connectors

from Molex e.g. 53261-0319, 53048-0310, 53047-0310, 53398-0319, 51047-0300.

Front panels for XL handle

307,

75

9

11,7

19,8

153,

218

0

230

85

30

7,7

5

9

11,7

19,8

15

3,2

180

230,8

5

14

,21

4,2 32,85

26

1,7

5

33

14

,45

14

,45

30

7,7

5

9

11,7

20,5

19,8

15

3,2

18

0

Item Qty Description1 1 U profile (for XL handle), height 6U, AI, front anodised,

side and rear chromated

Width Height Front panel Front panel for micro switch

HP U Order no. Order no.4 6 30849-153 30849-1548 6 30849-155 30849-15612 6 30849-157 30849-158Heavy load extractor handle XL larger PU 10 pieces

20817-874

Micro switch for XL handle with cable, grub screw, PU 10 pieces

20817-877

EMC textile gasket 6 U, PU 10 pieces 21101-855EMC textile gasket 6 U, PU 100 pieces 21101-856


Micro switch for XL handle

Description Qty / PU Order no.Micro switch with cable, connector (item 1), Molex connector housing 51021-0300, Molex crimp contact 50058-8000and assembly clip (Item 2)

10 20817-877

Max. switched current � 50 mAOperating temperature – 25 °C to + 70 °CMechanical life � 50000 switching cyclesElectrical life � 20000 switching cycles



Plug-in units

3 U

04604050

6 U

04604051

Trapeziodal type 2

� Shielded


Order Information

Plug-in units with insertion / extractor handle, type 2


< 8 HP �8 HP < 8 HP �8 HP1 1 1 2 2 Identification plate, Al, 1.5 mm,

anodised, cut edges raw2 1 1 2 2 Cantilever extractor handle, type 2,

lever PPE, light grey RAL 7035, mounting block Zn die-cast

3 1 1 2 2 Flathead screw, M2.5 x 6, nickel-plated

4 1 1 1 1 U front panel, Al, front anodised, rear chromated

5 1 1 - - Raised Pozidrive c/sk screw, M2.5 x 8, St, nickel-plated

6a

6b

2

2

4

4

2

2

4

4

Pozidrive collar screw, M2.5 x 12.3, St, nickel-platedPozidrive collar screw, M2.5 x 11, St, nickel-plated

7 1 3 – 2 Sleeve, PA, grey8 2 2 2 2 Washer A 2.79 2 2 2 2 Pan head screw with Torx,

M2.5 x 6, St, nickel-plated10 1 1 – – Printed board bracket, Zn die-cast11 1 1 1 1 EMC textile gasket,

core: foam, sleeve: textil cladding, with Cu-Ni coating

Height Width Order no.U HP3 4 20848-6863 6 20848-6873 8 20848-6883 10 20848-6893 12 20848-6906 4 20848-6916 6 20848-6926 8 20848-6936 10 20848-6946 12 20848-695



Plug-in units


3 U

04604052

6 U

04604053

� Unshielded


Order Information

Plug-in units with cantilever extractor handle, type 2


< 8 HP �8HP

< 8 HP �8HP

1 1 1 2 2 Identification plate, Al, 1.5 mm, anodised, cut edges untreated

2 1 1 2 2 Cantilever extractor handle, type 2, lever: PPE, light grey, RAL 7035, mounting block Zn die-cast

3 1 1 2 2 Flathead screw, M2.5 x 6, nickel-plated

4 1 1 1 1 Front panel, Al, 2.5 mm front anodised, rear colourless chromated

5 1 1 - - Raised Pozidrive c/sk screw M2.5 x 8, St, nickel-plated

6a

6b

2

2

4

4

2

2

4

4

Pozidrive collar screw, M2.5 x 12.3, St, nickel-platedPozidrive collar screw, M2.5 x 11, St, nickel-plated

7 1 3 – 2 Sleeve, PA, grey8 2 2 2 2 Washer A 2.79 2 2 2 2 Pan head screw with Torx, M2.5 x 6,

St, nickel-plated10 1 1 – – Printed board bracket, Zn die-cast

Height Width Order no.U HP3 4 20817-8603 5 20817-8613 6 20817-8623 7 20817-8633 8 20817-8643 10 20817-8653 12 20817-8666 4 20817-8676 5 20817-8686 6 20817-8696 7 20817-8706 8 20817-8716 10 20817-8726 12 20817-873




Plug-in units

04604056

04604054


Order Information

Cantilever extractor handle, type 2

2.5 6.1

3.65

13.8

5.9

3.7

15.4

19.8

23.4

Item Qty Description1 1 Cantilever extractor handle, type 2,

lever PPE; mounting block Zn die-cast

2 1 Identification plate, Al, 1.5 mm, anodised, cut edges untreated

3 1 Flathead screw, M2.5 x 6, nickel-plated4 1 Pozidrive collar screw, M2.5 x 12.3, St, nickel-plated4a 1 Pozidrive collar screw, M2.5 x 11, St, nickel-plated

Description Qty / PU Order no.Lever, light grey, RAL 7035 10 20817-858Lever, dark grey 10 20817-854Lever, black, RAL 9005 10 20817-856



Plug-in units


3 U

04602058

6 U

04602059

trapeziodal

� At 6 U, the printed board location can be moved 1 HP to the right by swapping the upper and lower printed board brackets. This creates space for SMD components on the left-hand side (solder side), only for printed board thickness 1.6 mm


Order Information

Plug-in units type 2 with cantilever extractor handle, front panel shielded

7

9 8

8

14 13

9

11

4a

4

6

1a

2

3

1


1 1 1 Cantilever extractor handle, PPE, grey, at bottom1a - 1 Cantilever extractor handle, PPE, grey, at top2 1 2 Identification plate, Al, 1.5 mm, anodised, cut

edges untreated3 1 2 Pivot bush, brass4 1 1 Printed board bracket, Zn die-cast, at bottom4a - 1 Printed board bracket, Zn die-cast, at top5 1 - Printed board bracket, Zn die-cast6 1 1 U front panel for extractor handle, front anodised,

rear chromated7 2 2 Alignment pin, pressed in, stainless steel8 2 2 Sleeve, PA, grey, up to 7 HP front panel width8 4 4 Sleeve, PA, grey, from 8 HP front panel width9 2 2 Pozidrive collar screw, St, nickel-plated,

M2.5 × 12.3, up to 7 HP front panel width9 4 4 Pozidrive collar screw, St, nickel-plated,

M2.5 × 12.3, from 8 HP front panel width11 1 2 Raised Pozidrive c/sk screw, M2.5 × 812 1 1 EMC textile gasket13 2 2 Washer, A2.714 2 2 Pozidrive flathead screw, St, nickel-plated,

M2.5 × 10

Width 6 U 3 UHP Order no. Order no.4 20848-492 20848-4856 20848-494 20848-4878 20848-496 20848-48910 20848-497 20848-49012 20848-498 20848-491




Plug-in units

3 U

04602060

6 U

04602061

� At 6 U, the printed board location can be moved 1 HP to the right by swapping the upper and lower printed board brackets. This creates space for SMD components on the left-hand side (solder side), only for printed board thickness 1.6 mm


Order Information

Plug-in units type 2 with cantilever extractor handle, front panel unshielded

5

4

13

14

8

9

11

6

2

3

1

9 8

8

14 13

9

11

4a

4

6

1a

2

3

1


1 1 1 Cantilever extractor handle, PPE, grey, at bottom1a – 1 Cantilever extractor handle, PPE, grey, at top2 1 2 Identification plate, Al, 1.5 mm, anodised,

cut edges untreated3 1 2 Pivot bush, brass4 1 1 Printed board bracket, Zn die-cast, at bottom4a – 1 Printed board bracket, Zn die-cast, at top5 1 – Printed board bracket, Zn die-cast6 1 1 Front panel for extractor handle, front anodised,

rear colourless chromated8 2 2 Sleeve, PA, grey, up to 7 HP front panel width8 4 4 Sleeve, PA, grey, from 8 HP front panel width9 2 2 Pozidrive collar screw, St, nickel-plated,

M2.5 × 12.3, up to 7 HP front panel width9 4 4 Pozidrive collar screw, St, nickel-plated,

M2.5 × 12.3, from 8 HP front panel width11 1 2 Raised Pozidrive c/sk screw, M2.5 × 813 2 2 Washer, A2.714 2 2 Pozidrive flathead screw, St, nickel-plated,

M2.5 × 10

Width 6 U 3 UHP Order no. Order no.4 20817-448 20817-4435 20817-449 20817-4446 20817-450 20817-4457 20817-451 20817-4468 20817-452 20817-44710 20817-458 20817-45612 20817-459 20817-457



Plug-in units


3 U / 6 U

04603063

Delivery comprises (individual part)

Order Information


04603054

Delivery comprises (individual part)

Order Information


� Please order EMC textile gasket separately, see page 7.39

Front panel unshielded for plug-in unit type 2 with cantilever extractor handle

ø5.9 x 3.3

A

B

12

2.4

99

12

8.4

ø3

12.5

3.6 3.9

3

4.2

14

.6

14

.7

7.455.08

ø5.9 x 3.3

A

B

25

5.7

5

232.3

5

26

1.7

5

12.5

3.6 3.9

3

4.2

14

.6

14

.7

7.45

A - A A - A

AA A A

ø2.5 ø2.5

Item Qty Description6 1 Front panel for cantilever extractor handle, Al, 2.5 mm,

front anodised, rear colourless chromated

Width A B 6 U 3 UHP mm mm Order no. Order no.4 19.98 – 30847-666 30847-6595 25.06 – 30847-667 30847-6606 30.14 – 30847-668 30847-6617 35.22 – 30847-669 30847-6628 40.3 20.32 30847-670 30847-66310 50.46 30.48 30847-671 30847-66412 60.62 40.64 30847-672 30847-665


Front panel shielded for plug-in unit type 2 with cantilever extractor handle

Z Z

Z

Y Y

Y

A

B

122.4

99

128.4

5.0812.5

3.6 3.9

3

14.7

4.2

14.6

7.455.08

2.5

5 2.5

6.2

6.2

ø 5.9 x 3.3

ø 5.9 x 3.3

ø 2.5 ø 2.5

A

B

255.7

5

232.3

5

261.7

5

5.0812.5

3.6 3.9

3

14.7

4.2

14.6

7.45

ø 2.5

ø 2.5

Item Qty Description6 1 U front panel for cantilever extractor handle, AI,

front anodised, rear chromated

Width A B 6 U 3 UHP mm mm Order no. Order no.4 19.98 – 30848-468 30848-4616 30.14 – 30848-470 30848-4638 40.3 20.32 30848-472 30848-46510 50.46 30.48 30848-473 30848-46612 60.62 40.64 30848-474 30848-467




Plug-in units

04602083

� The EMC textile gasket is stuck onto the front panels on the right-hand side of the profile

Delivery comprises

Order Information

BGA42556

� With separate identification plate

� Handle laterally closed


Order Information


EMC textile gasket

Item Qty Description1 1 EMC gasket.


Height Qty / PU Order no.U3 10 21101-8533 100 21101-8546 10 21101-8556 100 21101-856


Cantilever extractor handle

Item Qty Description1 1 Cantilever extractor handle, PPE, UL 94 V-1,

grey and black1a 1 Pivot bush, brass2 1 Identification plate, Al, 1.5 mm, anodised,

cut edges untreated4 1 Printed board bracket, Zn die-cast

Description Required quantity for 3 U

Required quantity for 6 U

Black GreyOrder no. Order no.

At the bottom 1 1 20817-329 20817-327At the top – 1 20817-330 20817-328



Plug-in units


bga42545

� For printed boards 3 U, at the top

� For printed boards 6 U, in the centre

Delivery comprises

Order Information


Order Information

Printed board bracket

8 / 8a

9 / 9a

11

13 15

5a

5

14 / 14a

Item Qty Description5 1 Printed board bracket, Zn die-cast, with thread M2.5

for front printed board assembly5a 1 Printed board bracket, plastic, PBT UL 94 V-0, grey,

with pocket for hexagon nut M2.5, for front panel assembly and for self-tapping screw

Description Material Order no.Printed board bracket Zn die-cast 60807-181Printed board bracket PBT, UL 94 V-0 60807-183


Assembly parts for plug-in unit type 2 with cantilever extractor handle

Item Description Material Application Quantity required Qty / PU Order no.3 U 3 U 6 U 6 U� 8 HP � 8 HP � 8 HP � 8 HP

8 Plastic sleeve, PA, grey PA, grey – 2 4 2 4 100 21100-4648a Metal sleeve, stainless steel Stainless steel – 2 4 – – 100 21100-662

9aPozidrive collar screw, M2.5 × 12.3, for europacPRO and ratiopacPRO

St, nickel-plated – 2 4 – – 100 21101-101

9Pozidrive collar screw, M2.5 × 11, for europacPRO and ratiopacPRO

St, nickel-plated – 2 4 2 4 100 21100-748

11Raised Pozidrive c/sk screw, M2.5 × 8

St, nickel-plated – 2 2 2 2 100 21100-429

13 Washer A2.7 St, nickel-plated – 2 2 2 2 100 21100-72114 Pozidrive flathead screw, M2.5 × 10 St, nickel-plated if using item 5 2 2 2 2 100 21101-220

14aPan head screw, self-tapping, M2.5 × 8

St, zinc-plated if using item 5a 1 1 – – 100 21100-710

15 Hexagon nut, M2.5 St, nickel-plated if using item 5a 1 1 – – 100 21100-144




Plug-in units

BGA42579

Symmetrical version / SMD version

Multibus

� Symmetrical versionThe pivot bushs of the extractor handles are identical on the top and bottom. The assembled printed board has a standard location for assembly into subracks.

� SMD versionThe pivot bushs of the extractor handles are different on the top and bottom. The assembled printed board is offset 1 HP (5.08 mm) to the right. This creates space for SMD components on the left hand side. Swapping the upper and lower handles, a standard location of the printed board is achieved.


Order Information


Plug-in unit type 2 with cantilever extractor handle for Multibus II® – individual parts

� For individual assembling of plug-in units type 2 in accordance with EN 60603

� Assembly of extractor handles possible on U shaped and flat front panels

� Extractor handle in symmetrical and SMD version, printed board is offset 1 HP to the right

BGA42549 BGA42663

Extractor handle for Multibus® II

4.7

30.9

3.5

11.720.6

20

20

4.0

7

1)

1)

4.0

7+

5.0

8

(SM

D)

8.2

5.5

5

Item Qty Description1 1 Extractor handle for Multibus® II, PC, UL 94 V-02 1 Pivot bush, Zn die-cast3 1 Socket cap head screw, M2.5 × 6 with slot



RAL 7032 Intel® whiteOrder no. Order no.

Symmetrical handle

1 2 20829-011 20829-019

SMD handle, at bottom

– 1 20829-003 –

SMD handle, at top

– 1 20829-004 –



Plug-in units


6 U

BGA46120

9 U

A4-2580

Delivery comprises

Order Information


Front panel for Multibus® II

Item Qty Description6 1 Front panel, U shaped, 4 HP for Multibus® II, Al, 1 mm 6a 1 Front panel, flat, 4 HP for Multibus® II, Al, 2.5 mm,

anodised, cut edges untreated

Height Flat U shapedU Order no. Order no.6 30829-006 30829-0019 – 30829-007




Plug-in units

BGA42549

BGA42584

BGA42585

� For additional fixing of printed boards

Delivery comprises

Order Information


Order Information

Centre fixing mounting blocks for Multibus®II

Item Qty Description7 + 8 1 Centre fixing mounting blocks, Zn die-cast,

nickel-plated

Item Description Order no.

7For assembly of D-sub connectors, 9-37-pin, thread at front M2.5

60829-005

8For assembly of D-sub connectors, 50-pin, thread at front UNC4/40

60829-008


Assembly parts

Item Description Qty / PU Order no.


100 21100-748

9aPozidrive collar screw, M2.5 × 12,3, for europacPRO and ratiopacPRO

100 21101-101


Plug-in units


3 U/6 U

04603055

04603056

Front panel example 4 HP3 U / 6 U

04603057

Key form 1

� At 6 U, the printed board location can be offset 1 HP to the right by swapping the upper and lower handles. This creates space for SMD components on the left hand side.

� Front panels (item 6) available on request.


Order Information


Extractor handle in key form 1

Item Qty Description1 1 Extractor handle in key form 1, PC, UL 94 V-02 1 Pivot bush, Zn die-cast, nickel-plated3 1 Socket cap head screw M2.5 × 6 with slot, St,

nickel-plated




Handle at bottom 1 1 20817-345 20817-325Handle at top – 1 20817-346 20817-326




Plug-in units

BGA42544

� The support fixes the location of the printed board to the front panel

� Also suitable for SMD applications

Order Information

04603066

� For printed boards 3 U, at the top

� For printed boards 6 U, in the centre

Delivery comprises

Order Information


Centre support for printed boards 6 U

Description Qty / PU Order no.Clamp, PPE, UL 94 V-0, black 100 21100-719



Item Qty Description5 1 Printed board bracket, Zn die-cast, with thread M2.5

for front and printed board assembly5a 1 Printed board bracket, plastic, PBT UL 94 V-0, grey,

with pocket for hexagon nut M2.5, for front panel assembly and for self-tapping screw

Description Material Order no.Printed board bracket Zn die-cast 60807-181Printed board bracket PBT, UL 94 V-0 60807-183



Plug-in units


BGA42545

Order Information

Assembly parts

8 / 8a

9 / 9a

11

13 15

5a

5

14 / 14a

Item Description Required quantity for 3 U


Qty / PU Order no.

8 Plastic sleeve, PA, grey 1 – 100 21100-4648a Metal sleeve, stainless steel 1 – 100 21100-6629 Pozidrive collar screw, M2.5 × 11, for europacPRO and ratiopacPRO 2 2 100 21100-7489a Pozidrive collar screw, M2.5 × 12.3, for europacPRO and ratiopacPRO 2 2 100 21101-10111 Raised Pozidrive c/sk screw, M2.5 × 8 1 – 100 21100-42913 Washer A2.7 2 2 100 21100-72114 Pozidrive flathead screw, M2.5 × 10 2 2 100 21101-22014a Pan head screw, self-tapping, 2.5 × 8 1 – 100 21100-71015 Hexagon nut, M2.5 3 6 100 21100-144




Plug-in units

3 U / 6 U

04603058

BGA42573

Front panel example

Left: 3 U, right: 6 U

BGA42578

Key form 2

� Front panels (item 6) available on request


Order Information


Extractor handle in key form 2

99

99

99118.2

3.3 3

4.5

4.5

7.457.45

5.085.08

ø2.5ø2.5

ø5.9

2020

241.3

5

133.3

5

A - A

AA A A

ø2.5

Item Qty Description1 1 Extractor handle in key form 2, PBT, UL 94 V-02 1 Pivot bush, Zn die-cast, nickel-plated3 1 Pivot pin, stainless steel4 1 Socket cap head screw with slot, M2.5 × 12, St,

nickel-plated5 1 Hexagon nut 2.5 mm, St, nickel-plated




Extractor handle 1 2 20808-137 20808-135



Plug-in units


BZA46430

Drill hole dimensions on the printed board

3 U

BGA43076

6 U

BGA43077

� For the assembly of the printed board onto the front panel

Order Information



5 / 5a

5c / 5d

5b

11

13

14 / 14a

5e



Order no.

5

4 holes for front panels/printed boards assembly, 4 pockets for hexagon nuts, PBT, UL 94 V-0, red, 1 piece

1 2 60807-011

5a

4 threads M2.5 for front panels/printed boards assembly, PBT UL 94 V-0, grey, 1 piece

1 2 60807-211

5b

Hole for front panel assembly, with pocket for hexagon nut, hole for self-tapping screw for printed board assembly, PBT UL 94 V-0, grey, 1 piece

2 4 60807-183

5c

2 threads M2.5 for front panels/printed boards assembly, Zn die-cast, 1 piece

2 4 60807-181

5d

Thread M2.5 for front panel assembly, hole for printed board assembly, Zn die-cast, 1 piece

2 4 60807-203




Plug-in units

BGA42545

Order Information

Assembly parts

8 / 8a

9 / 9a

11

13 15

5a

5

14 / 14a



Qty / PU Order no.

8 Plastic sleeve, PA, grey 1 – 100 21100-4648a Metal sleeve, stainless steel 1 – 100 21100-6629 Pozidrive collar screw, M2.5 × 11, for europacPRO and ratiopacPRO 2 2 100 21100-7489a Pozidrive collar screw, M2.5 × 12.3, for europacPRO and ratiopacPRO 2 2 100 21101-10111 Raised Pozidrive c/sk screw, M2.5 × 8 1 – 100 21100-42913 Washer A2.7 2 2 100 21100-72114 Pozidrive flathead screw, M2.5 × 10 2 2 100 21101-22014a Pan head screw, self-tapping, 2.5 × 8 1 – 100 21100-71015 Hexagon nut, M2.5 3 6 100 21100-144


Plug-in units


3 U

04602062

6 U

04602063

trapeziodal

� Front panel, shielded

� Handle without extraction function


Order Information

Plug-in unit with static handle (kit)

14

13

7

8

9

11

11

6

2

1

4

12


1 1 2 Plastic handle, PPE, grey2 1 2 Identification plate, Al, 1.5 mm, anodised,

cut edges untreated4 2 4 Printed board bracket, Zn die-cast6 1 1 U front profile for handle, front anodised,

rear chromated7 2 2 Alignment pin, pressed in, stainless steel8 2 2 Sleeve, PA, grey, up to 7 HP front panel width8 4 4 Sleeve, PA, grey, from 8 HP front panel width9 2 2 Pozidrive collar screw, St, nickel-plated,

M2.5 × 11 and 12.3, up to 7 HP front panel width9 4 4 Pozidrive collar screw, St, nickel-plated,

M2.5 × 11 and 12.3, from 8 HP front panel width11 1 2 Raised countersunk screw, St,

nickel-plated, M2.5 x 812 1 1 EMC textile gasket13 2 4 Washer, A2.714 2 4 Flathead screw, St, nickel-plated, M2.5 × 1015 1 2 Hexagon nut, St, nickel-plated, M2.516 1 2 Flathead screw, St, nickel-plated, M2.5 × 1217 1 2 Flathead screw, St, nickel-plated, M2.5 × 16

Width 3 U 6 UHP Order no. Order no.3 20848-663 20848-6714 20848-664 20848-6725 20848-665 20848-6736 20848-666 20848-6747 20848-667 20848-6758 20848-668 20848-67610 20848-669 20848-67712 20848-670 20848-678




Plug-in units

3 U

04602064

6 U

04602065

� Front panel unshielded

� Handle without extraction function


Order Information

Plug-in unit type 2 with static handle (kit)

14

13

8

9

11

6

1

17

2

9 8

16

15

4

14

13

8

9

11

11

6

2

1

4


1 1 2 Plastic handle, PPE, grey2 1 2 Identification plate, Al, 1.5 mm, anodised,

cut edges untreated4 2 4 Printed board bracket, Zn die-cast6 1 1 Front for handle, front anodised,

rear colourless chromated8 2 2 Sleeve, PA, grey, up to 7 HP front panel width8 4 4 Sleeve, PA, grey, from 8 HP front panel width9 2 2 Pozidrive collar screw, St, nickel-plated,

M2.5 × 11 and 12.3, up to 7 HP front panel width9 4 4 Pozidrive collar screw, St, nickel-plated,

M2.5 × 11 and 12.3, from 8 HP front panel width11 1 2 Raised countersunk screw, St,

nickel-plated, M2.5 x 813 2 4 Washer, A2.714 2 4 Flathead screw, St, nickel-plated, M2.5 × 1015 1 2 Hexagon nut, St, nickel-plated, M2.516 1 2 Flathead screw, St, nickel-plated, M2.5 × 1217 1 2 Flathead screw, St, nickel-plated, M2.5 × 16

Width 3 U 6 UHP Order no. Order no.3 20818-017 –4 20818-018 20818-0255 20818-019 20818-0266 20818-020 20818-0277 20818-021 –8 20818-022 20818-02810 20818-023 20818-02912 20818-024 –



Plug-in units


\

3 U / 6 U

04603053

Delivery comprises

Order Information


Plug-in unit type 2 with static handle (individual parts)

Front panel, unshielded

A - A A - A

A A

A

A A

A

ø2.5 ø2.5

7.45

7.45

99

13

3.4

12

2.4

12

8.4

14

.7

99

99

14

.7

DD

CC

25

5.8

33

26

1.8

ø 5.9 x 3.3

ø 5.9 x 3.3

ø 2.5ø 2.5

A

A

B

B

Item Qty Description6 1 Front panel with handle, Al, 2.5 mm, front anodised,

rear colourless chromated

Width A B C D 3 U 6 UHP mm mm mm mm Order no. Order no.3 14.9 – – – 30847-602 30847-6254 19.98 – – – 30847-603 30847-6265 25.06 – 10.16 – 30847-604 30847-6276 30.14 – – 15.24 30847-605 30847-6287 35.22 – – 20.32 30847-606 –8 40.3 25.4 – 25.4 30847-607 30847-63010 50.46 35.56 – 35.56 30847-608 30847-63112 60.62 45.72 – 45.72 30847-609 –




Plug-in units

04603064

TE = HP

Delivery comprises

Order Information


� Please order EMC profile gasket separately, see page 7.53

04602054


Order Information

Front panel, shielded

14.7

14.7

14.7

99

99

99

7.45

7.45

7.45

7.45

7.45

7.45

7.45

7.45

7.45

7.45

5.08

5.08

5.08

5.08

5.08

5.08

5.08 5.08

n x 5.08

5.085.08

5.08

5.08 5.08

5.08

5.08

5.08

5.08

5.08

5.08

A

A

A

A

A

A

A

A

A

A

B

B

ø5.9 x 3.3

ø5.9 x 3.3122.4

255.7

53

3

128.4

261.7

5

2 TE 3 TE 4 TE 5 TE >6 TE

Z Y

6.2

6.2

5 2.5

ø 2.5

2.5

5.08

5.08

5.08 5.08

n x 5.08

5.085.08

5.08

5.08 5.08

Item Qty Description6 1 U front profile for static handle, AI, 2.5 mm, front

anodised, rear chromated, alignment pin pressed in

Width A B 3 U 6 UHP mm mm Order no. Order no.3 14.9 – 30849-086 30849-0974 19.98 – 30849-087 30849-0985 25.06 – 30849-088 30849-0996 30.14 – 30849-089 30849-1007 35.22 – 30849-090 30849-1018 40.3 25.4 30849-091 30849-10210 50.46 35.56 30849-092 30849-10312 60.62 45.72 30849-093 30849-104


EMC textile gasket

Item Qty Description1 10 / 100 EMC textile gasket,


Height Height Qty / PU Order no.U mm3 97 10 21101-8533 97 100 21101-8546 232 10 21101-8556 232 100 21101-856


Plug-in units


BGA46447

A4-328a

A4-328c

� With separate identification plate

� Handles laterally closed


Order Information


Note� Required:

3 U: 1 handle at bottom 6 U: 1 handle at bottom, 1 handle at top

04602059

� Assembly aid for handle from 5 HP up to 42 HP

Order Information

Static handle (without extraction function)

Item Qty Description1a/1c 1 Plastic handle, PPE UL 94 V-1, grey and black2 1 Identification plate, Al, 1.5 mm, anodised,

cut edges untreated

Item Width Width Grey BlackHP mm Order no. Order no.

1a 3 13.8 20809-294 20809-3961a 4 18.9 20809-295 20809-3971c 5 24 20808-003 20808-0801c 6 29 20808-060 20808-0811c 7 34.1 20808-061 20808-0821c 8 39.2 20808-062 20808-0831c 9 44.3 20808-063 20808-0841c 10 49.4 20808-004 20808-0851c 12 59.6 20808-064 20808-0861c 14 69.7 20808-065 20808-0871c 21 105.2 20808-066 20808-0881c 28 140.8 20808-067 20808-0891c 40 201.8 20808-009 20808-0901c 42 212 20808-068 20808-0911c 61 308.5 20808-012 –


Fixing clip for cantilver plastic handle

Item Description Qty / PU Order no.23 Fixing clip, PPE, UL94-0, black 100 21101-239




Plug-in units

04602069

A4328d


Order Information


Note� Only printed board bracket 60807-011 usable

� Assembly kit pan head screw M2.5 x 12� FES printed board brackets cannot be used

04602070

� Assembly aid for handle

Order Information

Al profile handle

Item Qty Description20 1 Al profile handle, Al extrusion, anodised21 1 (from 6 HP: 2) Fixing part, POM, black22 1 (from 6 HP: 2) Square nut, St, nickel-plated

Width Width Description Order no.HP mm3 13.8 – 20809-2814 18.9 – 20809-2825 24 – 20809-2836 29 – 20809-2847 34.1 – 20809-2858 39.2 – 20809-2869 44.3 – 20809-28710 49.4 – 20809-28812 59.6 – 20809-28914 69.7 – 20809-29021 105.2 – 20809-29128 140.8 – 20809-29242 212 – 20809-293

– 1000Delivery comprises: item 20

30809-428


Fixing part for Aluminium profile handle

Item Description Qty / PU Order no.21 Fixing part, POM, black 100 21100-47622 Square nut, M2.5, St, nickel-plated 100 21100-359



Plug-in units


BZA46430

Drill hole dimensions on the printed board

3 U

BGA43076

6 U

BGA43077

� For the assembly of the printed board onto the front panel

Order Information



5 / 5a

5c / 5d

5b

11

13

14 / 14a

5e



Order no.

5

4 holes for front panels/printed boards assembly, 4 pockets for hexagon nuts, PBT, UL 94 V-0, red, 1 piece

1 2 60807-011

5a

4 threads M2.5 for front panels/printed boards assembly, PBT UL 94 V-0, grey, 1 piece

1 2 60807-211

5b

Hole for front panel assembly, with pocket for hexagon nut, hole for self-tapping screw for printed board assembly, PBT UL 94 V-0, grey, 1 piece

2 4 60807-183

5c2 threads M2.5 for front panels/printed boards assembly, Zn die-cast, 1 piece

2 4 60807-181

5d

Thread M2.5 for front panel assembly, hole for printed board assembly, Zn die-cast, 1 piece

2 4 60807-203

5e

4 threads M2.5 for front panels/printed board assembly for recessed installation of printed board (20 mm), mounting depth 192.24 mm, St, zinc-plated, not for europacPRO, ratiopacPRO, 1 piece

1 2 30808-871




Plug-in units

BGA46426A4-2184

� Assembly between front panel and die-cast printed board bracket of a plug-in unit

� Discharge via a horizontal rail with a conductive finish (chromated)

� Configuration top and/or bottom

Order Information

Note� Not usable for subrack europacPRO and desk-top

case ratiopacPRO

Order Information

Contact spring for electrostatic discharge (ESD)

Item Description Material Qty / PU Order no.

18Contact spring for electrostatic discharge (ESD)

St, corrosion-free 50 21101-147


Assembly parts

Item Description Material Application Quantity required Qty / PU

Order no.3 U 3 U 3 U 3 U 6 U 6 U 6 U 6 Uunshielded shielded unshielded shielded� 8 HP

� 8 HP

� 8 HP

� 8 HP

� 8 HP

� 8 HP

� 8 HP

� 8 HP

8 Plastic sleeve PA, greyFor unshielded front panels

2 4 – – 2 4 – – 100 21100-464

8a Metal sleeveStainless steel

For shielded front panels

– – 2 4 – – 2 4 100 21100-662

8 Metal sleeve BrassFor shielded front panels

– – 2 4 – – 2 4 100 21100-660


St, nickel-plated

– 2 4 – – 2 4 – – 100 21100-748

9aPozidrive collar screw, M2.5 × 12.3, for europacPRO and ratiopacPRO

St, nickel-plated

– – – 2 4 – – 2 4 100 21101-101

11Raised Pozidrive c/sk screw, M2.5 × 8

St, nickel-plated

– 1 1 1 1 2 2 2 2 100 21100-429

13 Washer A2.7St, nickel-plated

– 2 2 2 2 4 4 4 4 100 21100-721

14Pozidrive flathead screw, M2.5 × 8

St, nickel-plated

if using item 13 2 2 2 2 4 4 4 4 100 21101-069

14aPan head screw, self-tapping, 2.5 × 8

St, zinc-plated

if using item 5a 1 1 1 1 – – – – 100 21100-710

15 Hexagon nut, M2.5,St, nickel-plated

if using item 5a 1 1 1 1 – – – – 100 21100-144

16 Flathead screw, M2.5 × 12 mm St – 1 1 1 1 2 2 2 2 100 21101-22117 Flathead screw, M2.5 × 16 St – 1 1 1 1 2 2 2 2 100 21101-222


Plug-in units


04602077

a4-237

TE = HP

with shielding

� Connectors can be installed in accordance with EN 60603 (DIN 41612):Type B, C, D, F, H, R. Keying/coding with a separate keying/coding peg is not possible.


Please order item 4 shielding panel component side, stainless steel, 0.8 mm, separately

Order Information

Please order item 4 separately

Plug-in unit with mechanical shielding 3 U (kit)

� Mechanical protection of the plug-in unit

� GND/earthing of shielding panels possible via faston connector 6.3 × 0.6 mm

� For printed boards 100 × 160 mm

Handles without extraction function

Handles with extraction function

04694001 04692003 04692005

Shielding kit component side, handles with/without extraction function

Item Qty Description1 1 Front panel, Al, 2.5 mm, front anodised,

rear colourless chromated2 1 Cantilever handle, PPE, UL 94 V-1, grey3 1 Printed board bracket, PBT, UL 94 V-0, red5 1 Assembly kit (also for shielding panels)

Width H Plug-in unit type 2 without extractor function

Plug-in unit type 2 with extraction

function

Shielding panel component side,

item 4

HP mm Order no. Order no. Order no.3 9.6 20809-499 – 20809-3294 14.7 20809-500 20809-514 20809-3575 19.8 20809-501 20809-515 20809-3596 24.6 20809-502 20809-516 20809-371




Plug-in units

04602078

A4236

TE = HP

� Connectors can be installed in accordance with EN 60603 (DIN 41612): Type B, C, D, F, H, R. Keying/coding with a separate keying/coding peg is not possible.


Please order item 4 and 5 separately

Order Information

3 U shielding kit solder side/component side, handles without extraction function

1

3

5

2

4

Item Qty Description1 1 Front panel, AI, 2.5 mm, front anodised, rear

colourless chromated2 1 Cantilever handle without extraction function, PPE,

UL 94 V-1, grey3 2 Printed board bracket, PBT, UL 94 V-0, red4 1 Shielding panel component side, stainless steel,

0.8 mm5 1 Shielding panel solder side, stainless steel, 0.8 mm6 1 Assembly kit (also for shielding panel)

Width H Plug-in unit type 2

Shielding panel solder side

(item 5)

Shielding panel, component side

(item 4)HP mm Order no. Order no. Order no.4 9.6 20809-495 30809-571 20809-3295 14.7 20809-496 – 20809-3576 19.8 20809-497 – 20809-3597 24.9 20809-498 – 20809-371



Plug-in units


04602078

A4236

TE = HP

� Connectors can be installed in accordance with EN 60603 (DIN 41612):Type B, C, D, F, H, R. Keying/coding with a separate keying/coding peg is not possible.


Please order item 4 and 5 separately

Order Information

3 U shielding kit solder side/component side, handles with extraction function

1

3

5

2

4

Item Qty Description1 1 Front panel, AI, 2.5 mm, front anodised, rear

colourless chromated2 1 Cantilever handle with extraction function, PPE,

UL 94 V-1, grey3 2 Printed board bracket, Zn die-cast4 1 Shielding panel component side, stainless steel,

0.8 mm5 1 Shielding panel solder side, stainless steel, 0.8 mm6 1 Assembly kit (also for shielding panel)

Width H Plug-in unit type 2

Shielding panel solder side

(item 5)

Shielding panel component side

(item 4)HP mm Order no. Order no. Order no.5 14.7 20809-511 30809-571 20809-3576 19.8 20809-512 – 20809-3597 24.9 20809-513 – 20809-371



Documents

frontpaneler