FRP STRUCTURAL PRODUCTS - Grating World

FRP STRUCTURAL PRODUCTS

a world of FRP structural products E & OE E & OE

THINK OF STEEL STRUCTURAL SECTIONS … NOW THINK OF SECTIONS THAT WON’T RUST, ARE LOW MAINTENANCE, AND ARE LIGHTWEIGHT

THAT’S THE GRATING WORLD FRP STRUCTURAL PRODUCTS RANGE

LOOK ALIKE … BUT A WORLD APARTOur range of FRP Structural Products include all the shapes previously associated with steel sections, including I-Section, H-Section, C-Channel, Equal Angle, Unequal Angle, T-Section, Y-Section, Flat Plate, Flat Strip and Flat Strip Chamfered. Other profiles are Round Tube,Corrugated Round Tube, Square Tube,Rectangular Tube, Solid Round Rod, Solid Square Rod, Deck (with reinforced ribs under), Floor Plate, Kick Plate, Stair Nosing, Round Handrailing, Square Handrailing, Handrail Cover (to fit over square or rectangular tube), Cat Ladder, Water Grating, Round and Square Manhole Covers.

GRATING WORLD FRP Structural Products are generally manufactured of vinyl ester resin and glass roving using the pultrusion process (see below) that produces consistent, reliable quality and maximises glass fibre reinforcement. Isophthalic polyester and other resin types on request.

GRATING WORLD FRP Structural Products have a Class 1 fire retardance with an ASTM E-84 flame spread rating of 25 or less.

The advantages of FRP Structural Products are: • Highstrength • Longlife • Lowmaintenance • Chemicalresistant • Corrosionresistant • Lightweight • Easilyassembled • Dimensionallystable • Fireresistant • R.F.transparent • Non-Conductive(Electrical) • Non-Conductive(Non-Magnetic)

GRATING WORLD FRP Structural Products have a multiplicity of uses including: • Longspanroofandwallbeams • Primarybuildingstructures • Wallcolumns • Tankcoverbeams • Coolingtowerstructures • Cablemanagementsystems

GRATING WORLD FRP Structural Products deliver significant end-user benefits of outstanding corrosion resistance and ease of use, resulting in substantial life-cycle cost savings.

GUIDELINES FOR THE ENGINEER AND DESIGNERBecause FRP Structural Products will be new to many engineers and designers, GRATING WORLD has provided dimensions and mechanical properties. Guidelines to assist in the design of structural members including connection details will be provided on request.

THE PULTRUSION PROCESSPultrusion is a continuous process in which resin and reinforcing materials form profiles of constant cross section in continuous length. Pultrusion gets its name from the method by which the profiles are made. Raw materials are literally pulled by a device with a drive system and pads which grip the roving.

The process starts with the reinforcements; typically, unidirectional glass roving that runs along the length of the profile. Fibreglass mat is added (the multidirectional reinforcement), then resin.

The glass is saturated with liquid resin (to which a catalyst/hardener has been added) and pulled into a heated die where the curing takes place and the product changes from liquid to a solid profile. The profile is then cut to the desired length.

DISCLAIMERGRATING WORLD (PTY) LTD believes the information contained herein to be true and accurate. No warranty, expressed or implied, is made on this information and no responsibility for consequential or incidental damages is assumed. Information herein is for evaluation only.

E & OEa world of FRP

structural productsE & OE

FRP STRUCTURAL SECTIONS PROPERTIES 1I-SECTION 2H-SECTION 2T-SECTION 2C-CHANNEL 3FLAT BAR 3Y-SECTION (Cast-In Profile) 3EQUAL ANGLE 4UNEQUAL ANGLE 4

FRP STRUCTURAL SECTIONS 1

ROUND TUBE 5CORRUGATED ROUND TUBE 5SQUARE TUBE 5RECTANGULAR TUBE 6SOLID ROUND ROD 6SOLID SQUARE ROD 6

FRP TUBE & ROD 5

DECK 7FLOOR PLATE 7KICK PLATE 7STAIR NOSING 8FLAT PLATE 8FLAT STRIP - CHAMFERED EDGE 8

FRP PROFILES7

7

FRP HANDRAILING & LADDERS 9

ROUND HANDRAILING 9SQUARE HANDRAILING 9HANDRAIL COVER 10CAT LADDER 10

FRP COVERS 11

WATER GRATING WITH FRAME 11ROUND MANHOLE COVER 11SQUARE MANHOLE COVER 11

FRP GRATEX® M/P 12

FRP GRATING - MOULDED AND PULTRUDED 12

FRP STRUCTURAL PRODUCTS


MECHANICAL PROPERTIES ASTM UNITS APPROX. VALUESTensile Stress L D-638 MPa 207Tensile Stress C D-638 MPa 48Tensile Modulus L D-638 GPa 17Tensile Modulus C D-638 GPa 5.5Compressive Stress L D-695 MPa 207Compressive Stress C D-695 MPa 103Compressive Modulus L D-695 GPa 17Compressive Modulus C D-695 GPa 7Flexural Stress L D-790 MPa 207Flexural Stress C D-790 MPa 69Flexural Modulus L D-790 GPa 12Flexural Modulus C D-790 GPa 5.5Modulus of Elasticity E Full Section GPa 19Shear Modulus GPa 3Short Beam Shear D-2344 MPa 31Punch Shear D-732 MPa 69Bearing Stress L D-953 MPa 207Notched Izod Impact L D-256 J/mm 1.3Notched Izod Impact C D-256 J/mm 0.2PHYSICAL PROPERTIESBarcol Hardness D-2583 4524 Hour Water Absorption D-570 % max 0.5Density D-792 kg/m3 1700 - 1900Coefficient of Thermal Expansion L D-696 10-6cm/cm/0C 8ELECTRICAL PROPERTIESArc Resistance L D-495 Seconds 120Dielectric Strength L D-149 KV/mm 1.4Dielectric Strength P D-149 KV/mm 8Dielectric Constant P D-150 @50hz 5

Vinyl Ester and Isophthalic Polyester Structural SectionsFLAMMABILITY PROPERTIESTunnel Test E-84 Flame spread 25 maxFlammability D-635 Non-Burning

The values below are from tests performed in accordance with ASTM

FRP STRUCTURAL MATERIAL PROPERTIESFRP STRUCTURAL MATERIAL PROPERTIES 1

L = Lengthwise C = Crosswise P = Perpendicular to Face

I-SECTION (UNIVERSAL BEAMS)CODE

SECTIONS m h b tw tf r1 hw Ah x b kg/m mm mm mm mm mm mm 103mm2

IB50B 102 x 50 3.0 102 50 8.0 8.0 4.0 78.0 1.5IB76B 152 x 76 5.3 152 76 9.5 9.5 4.8 123.5 2.7IB102B 203 x 102 9.5 203 102 12.7 12.7 6.4 164.9 4.9IB127B 254 x 127 11.9 254 127 12.7 12.7 6.4 215.9 6.2IB152B 305 x 152 14.3 305 152 12.7 12.7 6.4 266.9 7.4

CODEABOUT x-x ABOUT y-y

I Ze r I Ze r106mm4 103mm3 mm 106mm4 103mm3 mm

IB50B 2.2 43.0 38.4 0.2 6.8 10.7IB76B 9.2 121.1 58.3 0.7 18.5 16.1IB102B 29.4 289.8 77.9 2.3 44.6 21.7IB127B 59.6 47.0 98.6 4.4 68.9 26.7IB152B 105.6 662.8 119.4 7.5 98.4 31.8

Other sizes available on enquiry

H-SECTION (UNIVERSAL COLUMNS)CODE


HB152B 152 x 152 5.3 152 152 9.5 9.5 4.8 123.5 4.2HB203B 203 x 203 14.4 203 203 12.7 12.7 6.4 164.9 7.4HB254A 254 X 254 18.0 254 254 12.7 12.7 6.4 215.9 9.4HB305 305 x 305 21.5 305 305 12.7 12 6.4 266.9 11.3

CODE

ABOUT x-x ABOUT y-yI Ze r I Ze r

106mm4 103mm3 mm 106mm4 103mm3 mmHB152B 16.5 217.7 63.1 5.6 73.3 36.6HB203B 52.6 519.0 84.3 17.7 174.8 48.9HB254B 106.6 839.7 106.8 34.7 273.4 60.9HB305 188.7 1237.5 129.2 60.1 394.1 72.9


CODE SECTIONS mh x b x tw/tf kg/m

T-SHAPE 31 x 54 x 6.0 0.89

59 x 54 x 6.0 1.03

51 x 54 x 6.0 1.10

46 x 60 x 6.0 1.30

44.4 x 76 x 6.6 1.38

T-SECTION

IMPORTANT NOTE: Designers should confirm the material properties and apply appropriate load and safety factors NOTE: Section properties are gross. Allowances must be made for net values when holes are drilled.Designers should apply appropriate load and safety factors.



I-SECTION (UNIVERSAL BEAMS)CODE


IB50B 102 x 50 3.0 102 50 8.0 8.0 4.0 78.0 1.5IB76B 152 x 76 5.3 152 76 9.5 9.5 4.8 123.5 2.7IB102B 203 x 102 9.5 203 102 12.7 12.7 6.4 164.9 4.9IB127B 254 x 127 11.9 254 127 12.7 12.7 6.4 215.9 6.2IB152B 305 x 152 14.3 305 152 12.7 12.7 6.4 266.9 7.4


CODEABOUT x-x ABOUT y-y


IB50B 2.2 43.0 38.4 0.2 6.8 10.7IB76B 9.2 121.1 58.3 0.7 18.5 16.1IB102B 29.4 289.8 77.9 2.3 44.6 21.7IB127B 59.6 47.0 98.6 4.4 68.9 26.7IB152B 105.6 662.8 119.4 7.5 98.4 31.8


H-SECTION (UNIVERSAL COLUMNS)CODE


HB152B 152 x 152 5.3 152 152 9.5 9.5 4.8 123.5 4.2HB203B 203 x 203 14.4 203 203 12.7 12.7 6.4 164.9 7.4HB254A 254 X 254 18.0 254 254 12.7 12.7 6.4 215.9 9.4HB305 305 x 305 21.5 305 305 12.7 12 6.4 266.9 11.3

CODE


106mm4 103mm3 mm 106mm4 103mm3 mmHB152B 16.5 217.7 63.1 5.6 73.3 36.6HB203B 52.6 519.0 84.3 17.7 174.8 48.9HB254B 106.6 839.7 106.8 34.7 273.4 60.9HB305 188.7 1237.5 129.2 60.1 394.1 72.9


CODE SECTIONS mh x b x tw/tf kg/m

T-SHAPE 31 x 54 x 6.0 0.89

59 x 54 x 6.0 1.03

51 x 54 x 6.0 1.10

46 x 60 x 6.0 1.30

44.4 x 76 x 6.6 1.38

T-SECTION

NOTE: Section properties are gross. Allowances must be made for net values when holes are drilled.Designers should apply appropriate load and safety factors.


C-CHANNELCODE

SECTIONS m h b tw tf r1 hw A

h x b kg/m mm mm mm mm mm mm 103mm2

C76C 76 x 38 1.70 76 38 6.4 6.4 3.2 63.2 0.89

C102F 102 x 44 2.10 102 44 6.4 6.4 3.2 89.2 1.13

C120D 120 x 40 1.81 120 40 5.0 5.0 2.5 110.0 0.95

C150A 150 x 80 1.09 150 80 3.5 3.5 1.75 143.0 1.06

C150B 150 x 100 4.10 150 100 6.4 6.4 3.2 137.2 2.16

C203C 203 x 102 9.20 203 102 12.7 12.7 6.35 177.6 4.85

C210C 210 x 85 3.52 210 85 5.0 5.0 2.5 200.0 1.85

C254 254 x 70 8.90 254 70 12.7 12.7 6.35 228.6 4.68

C292 292 x 70 9.60 292 70 12.7 12.7 6.35 266.6 5.16

C310A 310 x 115 5.10 310 115 5.0 5.0 2.5 300.0 2.65


CODE ay

About x-x About y-y


C76C 11.8 0.725 19.087 28.5 0.115 4.395 11.4

C102F 12.5 1.666 32.691 38.3 0.193 6.135 13.0

C120D 9.9 1.878 31.298 44.5 0.125 4.161 11.5

C150A 21.9 3.858 51.442 60.3 0.686 11.814 25.4

C150B 31.0 7.978 106.406 60.8 2.210 32.014 32.0

C203C 30.2 29.402 289.845 77.9 4.680 65.204 31.1

C210C 20.9 12.265 116.813 81.4 1.249 19.478 26.0

C254 17.2 38.536 303.529 90.7 1.670 31.650 18.9

C292 16.2 54.741 375.018 103.0 1.728 32.135 18.3

C310A 26.4 37.996 245.142 119.7 3.240 36.551 35.0


CODE a x b x tm

kg/mY-SHAPE 25 x 38 x 6.4 1.40

38 x 38 x 6.4 160

50 x 38 x 6.4 1.70

Y-SECTION

CODE WIDTH x THICKNESSm

kg/mFS30B 30 x 6.4 0.37

FS38 38 x 5.0 0.37

FS40 40 x 8.0 0.62

FS50C 50 x 8.0 0.76

FS102 102 x 5.0 0.97

FS152 152 x 20.0 5.90

FS190 190 x 15.0 5.42

FS280 280 x 10.0 5.32

FLAT BAR

EQUAL ANGLECODE

SECTIONS m h b tw tf r1 Ah x b x t kg/m mm mm mm mm mm 103mm2

EL32 32 x 32 x 4.0 0.42 32 32 4.0 4.0 2.0 0.241

EL38B 38 x 38 x 6.4 0.85 38 38 6.4 6.4 3.2 0.448

EL45 45 x 45 x 4.8 0.75 45 45 4.8 4.8 2.4 0.410

EL50B 50 x 50 x 6.4 1.41 50 50 6.4 6.4 3.2 0.601

EL60 60 x 60 x 9.0 1.90 60 60 9.0 9.0 4.5 1.003

EL76D 76 x 76 x 9.5 2.57 76 76 9.5 9.5 4.75 1.359

EL101B 101 x 101 x 8.0 2.95 101 101 8.0 8.0 4.0 1.555

EL101C 101 x 101 x 9.5 3.48 101 101 9.5 9.5 4.75 1.834

EL152B 152 x 152 x 9.5 5.42 152 152 9.5 9.5 4.75 2.803

CODE ax ay

ABOUT x-x and y-yI Ze r

106mm4 103mm3 mmEL32 9.5 9.5 0.0219 1.010 9.7

EL38B 11.8 11.8 0.0543 2.197 11.4

EL45 13.0 13.0 0.0754 2.438 13.8

EL50B 14.8 14.8 0.1328 3.938 15.2

EL60 18.3 18.3 0.3105 7.825 18.1

EL76D 22.5 22.5 0.6957 13.542 23.1

EL101B 28.2 28.2 1.4905 20.996 31.4

EL101C 28.8 28.8 1.7241 24.593 31.2

EL152B 41.5 41.5 6.2147 57.364 47.6


UNEQUAL ANGLECODE


L100 100 x 50 x 6.4 1.8 100 50 6.4 6.4 3.2 0.921

L145 145 x 76 x 10 3.9 145 76 10.0 10.0 5.0 2.115

L170 170 x 76 x 9.5 4.4 170 76 9.5 9.5 4.8 2.252

L180 180 x 80 x 8.0 3.9 180 80 8.0 8.0 4.0 2.019

L254 254 x 40 x 6.4 3.6 254 40 6.4 6.4 3.2 1.843

CODE ax ay


106mm4 103mm3 mm 106mm4 103mm3 mmL100 35.8 10.8 0.1653 14.949 32.3 0.960 4.281 13.5

L145 51.4 16.9 0.8916 49.271 46.8 4.613 15.336 20.7

L170 62.4 15.4 0.8897 63.391 55.1 6.819 14.872 20.0

L180 65.4 15.4 0.9061 60.521 58.6 6.934 14.167 21.3

L254 112.5 5.5 0.1014 82.362 79.6 11.651 2.952 7.4






EQUAL ANGLE


CODESECTIONS m h b tw tf r1 Ah x b x t kg/m mm mm mm mm mm 103mm2

EL32 32 x 32 x 4.0 0.42 32 32 4.0 4.0 2.0 0.241

EL38B 38 x 38 x 6.4 0.85 38 38 6.4 6.4 3.2 0.448

EL45 45 x 45 x 4.8 0.75 45 45 4.8 4.8 2.4 0.410

EL50B 50 x 50 x 6.4 1.41 50 50 6.4 6.4 3.2 0.601

EL60 60 x 60 x 9.0 1.90 60 60 9.0 9.0 4.5 1.003

EL76D 76 x 76 x 9.5 2.57 76 76 9.5 9.5 4.75 1.359

EL101B 101 x 101 x 8.0 2.95 101 101 8.0 8.0 4.0 1.555

EL101C 101 x 101 x 9.5 3.48 101 101 9.5 9.5 4.75 1.834

EL152B 152 x 152 x 9.5 5.42 152 152 9.5 9.5 4.75 2.803

CODE ax ay

ABOUT x-x and y-yI Ze r

106mm4 103mm3 mmEL32 9.5 9.5 0.0219 1.010 9.7

EL38B 11.8 11.8 0.0543 2.197 11.4

EL45 13.0 13.0 0.0754 2.438 13.8

EL50B 14.8 14.8 0.1328 3.938 15.2

EL60 18.3 18.3 0.3105 7.825 18.1

EL76D 22.5 22.5 0.6957 13.542 23.1

EL101B 28.2 28.2 1.4905 20.996 31.4

EL101C 28.8 28.8 1.7241 24.593 31.2

EL152B 41.5 41.5 6.2147 57.364 47.6


UNEQUAL ANGLECODE


L100 100 x 50 x 6.4 1.8 100 50 6.4 6.4 3.2 0.921

L145 145 x 76 x 10 3.9 145 76 10.0 10.0 5.0 2.115

L170 170 x 76 x 9.5 4.4 170 76 9.5 9.5 4.8 2.252

L180 180 x 80 x 8.0 3.9 180 80 8.0 8.0 4.0 2.019

L254 254 x 40 x 6.4 3.6 254 40 6.4 6.4 3.2 1.843

CODE ax ay


106mm4 103mm3 mm 106mm4 103mm3 mmL100 35.8 10.8 0.1653 14.949 32.3 0.960 4.281 13.5

L145 51.4 16.9 0.8916 49.271 46.8 4.613 15.336 20.7

L170 62.4 15.4 0.8897 63.391 55.1 6.819 14.872 20.0

L180 65.4 15.4 0.9061 60.521 58.6 6.934 14.167 21.3

L254 112.5 5.5 0.1014 82.362 79.6 11.651 2.952 7.4





ROUND TUBECODE

SECTIONS m A I Ze OD ID t r ax & ay JD x t kg/m 103mm2 106mm4 103mm3 mm mm mm mm mm 106mm4

RT38D 38 x 6..4 1.18 0.64 0.083 4.345 38 25.2 6.4 11.4 19.0 0.165

RT50C 50 x 5.0 1.34 0.71 0.181 7.245 50 40.0 5.0 16.0 25.0 0.362

RT50.8A 50.8 x 6.4 1.70 0.89 0.225 8.840 50.8 38.0 6.4 15.9 25.4 0.449

RT64B 64 x 6.4 2.38 1.16 0.486 15.194 64 51.2 6.4 20.5 32.0 0.972

RT76 76 x 6.4 2.64 1.40 0.855 22.487 76 63.2 6.4 24.7 38.0 1.709

RT89C 89 x 6.4 3.13 1.66 1.425 32.019 89 76.2 6.4 29.3 44.5 2.850

RT101 101 x 6.4 3.62 1.90 2.137 42.325 101 88.2 6.4 33.5 50.5 4.275

RT114D 114 x 9.5 5.93 3.12 4.292 75.306 114 95.0 9.5 37.1 57.0 8.585

RT150D 150 x 9.5 8.00 4.19 10.394 138.59 150 131.0 9.5 49.8 75.0 20.789

FRP TUBE & ROD 5

CORRUGATED ROUND TUBECODE d1 x d2 x T

mkg/m

CT32A 19 x 32 x 6.4 1.11

CT34A 19 x 34 x 7.5 1.30

CT32B 25 x 32 x 3.5 0.66

CT42 29 x 42 x 6.4 1.35

CT45A 28 x 45 x 8.5 1.86

CT45B 32 x 45 x 64 1.10

CT51 51 x 36 x 7.0 175

CT90B 71 x 90 x 9.5 5.70

SQUARE TUBECODE h x b x t

m AABOUT x-x and y-y

I Ze r

kg/m 103mm2 106mm4 103mm3 mmST38C 38 x 38 x 6.4 1.54 0.809 0.140 7.377 13.2

ST50E 50 X 50 X 6.4 2.12 1.116 0.361 14.450 18.0

ST60A 60 x 60 x 5.0 2.10 1.100 0.559 18.639 22.5

ST64C 64 x 64 x 6.4 2.80 1.475 0.825 25.795 23.7

ST76C 76 x 76 x 6.4 3.39 1.782 1.451 38.176 28.5

ST101C 101 x 101 x 6.4 4.61 2.422 3.629 71.854 38.7

ST152B 152 x 152 x 9.5 10.40 5.415 18.408 242.208 58.3

CODESECTIONS m A


h x b x t kg/m 103mm2 106mm4 103mm3 mm 106mm4 103mm3 mmFT50B 51 x 25 x 6.4 1.54 0.81 0.220 8.615 16.5 0.061 4.850 8.7

FT80 80 x 60 x 5.0 2.50 1.30 1.131 28.271 29.5 0.711 23.694 23.4

FT91A 91 x 38 x 4.0 1.78 0.97 0.957 21.029 31.4 0.229 12.072 15.4

FT112A 112 x 91 x 6.4 4.46 2.43 4.293 76.652 42.0 3.080 67.695 35.6

FT120 120 x 45 x 3.0 2.00 0.95 1.665 27.750 41.8 0.348 15.454 19.1

FT175 175 x 50 x 9.0 7.00 3.73 12.011 137.269 56.8 1.394 55.768 19.3

CODE DIMENSIONS (mm) WEIGHT(kg/m)Solid Round Tube d

SRR254 25.4 1.00

SRR328 32.8 1.51

SRR380 38.0 2.15

SRR22 22.0 0.72

CODE DIMENSIONS (mm) WEIGHT(kg/m)Solid Square Rod a x b

SSR25 25 x 25 1.23

SSR32 32 x 32 2.00

SSR38 38 x 38 2.80

SOLID SQUARE ROD





FRP TUBE & ROD 6

RECTANGULAR TUBE

CODESECTIONS m A


h x b x t kg/m 103mm2 106mm4 103mm3 mm 106mm4 103mm3 mmFT50B 51 x 25 x 6.4 1.54 0.81 0.220 8.615 16.5 0.061 4.850 8.7

FT80 80 x 60 x 5.0 2.50 1.30 1.131 28.271 29.5 0.711 23.694 23.4

FT91A 91 x 38 x 4.0 1.78 0.97 0.957 21.029 31.4 0.229 12.072 15.4

FT112A 112 x 91 x 6.4 4.46 2.43 4.293 76.652 42.0 3.080 67.695 35.6

FT120 120 x 45 x 3.0 2.00 0.95 1.665 27.750 41.8 0.348 15.454 19.1

FT175 175 x 50 x 9.0 7.00 3.73 12.011 137.269 56.8 1.394 55.768 19.3

CODE DIMENSIONS (mm) WEIGHT(kg/m)Solid Round Tube d

SRR254 25.4 1.00

SRR328 32.8 1.51

SRR380 38.0 2.15

SRR22 22.0 0.72

SOLID ROUND ROD

CODE DIMENSIONS (mm) WEIGHT(kg/m)Solid Square Rod a x b

SSR25 25 x 25 1.23

SSR32 32 x 32 2.00

SSR38 38 x 38 2.80

SOLID SQUARE ROD



FRP PROFILES 7

DECKCODE a x t1 x b x t2

mkg/m

305 x 6.4 x 47.5 x 6.4 8.5

500 x 5.0 x 48.5 x 6.4 12.0

500 x 5.0 x 40.0 x 5.0 9.8

FLOOR PLATECODE a x t1 x b x t2

mkg/m

605 x 13 x 97 x 13 56.0

CODEa x b x t

mM Shape kg/m

M2 100 x 13 x 3.2 1.10

M3 100 x 16 x 5.0 1.30

M4 148 x 12 x 3.0 1.27

W Shape

W1 100 x 19 x 5.0 1.36

W2 100 x 15 x 3.2 1.10

W3 150 x 15 x 3.2 1.60

KICK PLATES

CODE a x b x tm

kg/m25 x 50 x 4.0 0.51

25 x 60 x 3.0 0.50

30 x 70 x 4.0 0.75

55 x 55 x 3.2 0.80

30 x 76 x 4.0 0.80

50 x 90 x 3.2 0.90

Round Angle 30 x 100 x 3.2 0.80

30 x 230 x 3.2 1.60

Square Angle 30 x 100 x 3.2 0.85

30 x 152 x 3.2 1.20

30 x 230 x 3.2 1.70

55 x 300 x 4.0 2.80

55 x 345 x 4.0 3.85

30 x 381 x 3.2 2.70

STAIR NOSING

FLAT STRIP - CHAMFERED EDGECODE THICKNESS x WIDTH

mkg/m

FS70 40 x 7.0 0.54

FS100 3.2 x 100 0.60

FS120 3.0 x 120 0.70

FLAT PLATECODE THICKNESS x WIDTH

mkg/m

FP32 3.2 x 1220 7.42

FP64 6.4 x 1220 14 84

FP95 9.5 x 1220 22.02

FP127 12.7 x 1220 29.44

FP152 15.2 x 1220 35.30

FP190 19.0 x 1220 44.10

M Shape

W Shape



CODE a x b x tm

kg/m25 x 50 x 4.0 0.51

25 x 60 x 3.0 0.50

30 x 70 x 4.0 0.75

55 x 55 x 3.2 0.80

30 x 76 x 4.0 0.80

50 x 90 x 3.2 0.90

Round Angle 30 x 100 x 3.2 0.80

30 x 230 x 3.2 1.60

Square Angle 30 x 100 x 3.2 0.85

30 x 152 x 3.2 1.20

30 x 230 x 3.2 1.70

55 x 300 x 4.0 2.80

55 x 345 x 4.0 3.85

30 x 381 x 3.2 2.70

STAIR NOSING

FRP PROFILES 8

FLAT STRIP - CHAMFERED EDGECODE THICKNESS x WIDTH

mkg/m

FS70 40 x 7.0 0.54

FS100 3.2 x 100 0.60

FS120 3.0 x 120 0.70

FLAT PLATECODE THICKNESS x WIDTH

mkg/m

FP32 3.2 x 1220 7.42

FP64 6.4 x 1220 14 84

FP95 9.5 x 1220 22.02

FP127 12.7 x 1220 29.44

FP152 15.2 x 1220 35.30

FP190 19.0 x 1220 44.10



HAND RAILING SYSTEM

ROUND RAILING

SQUARE RAILING

CODEa x b x t

mU Shape kg/m

62 x 59 x 4.5 1.50

62 x 60 x 5.0 1.70

Square Shape A x B x T1 x T2

STH50 50 x 50 x 6.4 x 5.0 3.0



HANDRAIL COVERCODE

a x b x tm

U Shape kg/m62 x 59 x 4.5 1.50

62 x 60 x 5.0 1.70

Square Shape A x B x T1 x T2

STH50 50 x 50 x 6.4 x 5.0 3.0

CAT LADDER



ROUND MANHOLE COVERSCODE TOP COVER BASE TOTAL

SIZE (mm) WEIGHT (kg) SIZE (mm) a x b x c WEIGHT (kg) WEIGHT (kg)Heavy ø700 ø700 x 65 39.5 ø630 x ø840 x 110 22.7 62.2

Light ø700 ø700 x 40 19.5 ø655 x ø800 x 62 10.4 29.9

Heavy ø600 ø600 x 50 21.4 ø535 x ø730 x 80 15.0 36.4

Light ø600 ø600 x 40 16.7 ø552 x ø700 x 57 8.2 24.9

Normal ø500 ø500 x 40 12.4 ø455 x ø600 x 62 7.9 20.3

WATER GRATING WITH FRAMECODE TOP COVER BASE TOTAL

SIZE (mm) WEIGHT (kg) SIZE (mm) a x b x c x d x e WEIGHT (kg) WEIGHT (kg)500 X 400 500 x 400 x 40 10.7 605 x 505 x 445 x 345 x 60 9.5 20.2

450 x 300 450 x 300 x 34 6.4 550 x 400 x 400 x 250 x 58 6.8 13.2

350 x 250 350 x 250 x 30 3.8 435 x 335 x 305 x 205 x 45 3.8 7.6

300 x 250 300 x 250 x 30 4.0 435 x 335 x 305 x 205 x 45 3.9 7.9

FRP COVERS 11

SQUARE MANHOLE COVERSCODE TOP COVER BASE TOTAL

SIZE (mm) WEIGHT (kg) SIZE (mm) a x b x c x d x e WEIGHT (kg) WEIGHT (kg)Heavy 600 600 x 600 x 60 28.6 715 x 715 x 540 x 540 x 85 17.5 46.1

Light 600 600 x 600 x 40 19.8 700 x 700 x 550 x 550 x 62 12.0 31.8

Heavy 500 500 x 500 x 40 12.7 600 x 600 x 450 x 450 x 58 8.5 21.2

Light 500 500 x 500 x 25 6.3 570 x 570 x 468 x 468 x 40 4.4 10.9

Heavy 400 400 x 400 x 34 7.6 500 x 500 x 358 x 358 x 56 7.2 14.8

Light 400 400 x 400 x 20 4.5 476 x 476 x 362 x 362 x 37 3.9 8.4

FIBREGLASS GRATING - MOULDED & PULTRUDED

CODE SPAN mm APPROXMass/m2

DEPTH PITCH 300 400 500 600 750 900 1000 1250

U C U C U C U C U C U C U C U C

M25 25 38 x 38 3364 611 1325 356 715 244 448 163 12.3

M30 30 38 x 38 5813 1055 2289 615 1235 421 774 281 395 202 14.6

M38 38 38 x 38 7840 1467 3260 825 2202 682 1274 479 713 326 458 241 336 225 19.0

M50 50 50 x 50 14271 2790 6610 1569 3862 1207 2747 1070 1529 713 917 509 713 408 408 306 21.5

GRATEX® FRP FIBREGLASS GRATING - MOULDED & PULTRUDEDLOAD/SPAN TABLES

IMPORTANT NOTES1. U, kg/m2, maximum allowable unfactored uniformly distributed loading for that stated span2. C, kg/m, maximum allowable unfactored centre line load per metre3. Load/Span Tables based on elastic deflections of span/200 or 10mm, whichever the lesser when subjected to the specified unfactored load4. All table loadings to be taken as nominal and should not be used as guaranteed values5. Appropriate safety factors must be applied by the designer

CODE BEARER BAR BEARER BAR SPAN mm APPROXMass/m2

DEPTH PITCH 300 400 500 600 750 900 1000 1200 1500 1750

mm mm U C U C U C U C U C U C U C U C U C U C

P2538 25 38 17125 3160 7240 1835 4077 1815 2447 918 1264 581 754 428 550 347 326 245 11

P3838 38 38 43425 8155 18247 4587 16805 3364 6320 2345 3466 1519 2140 1193 1529 968 948 704 489 449 326 300 16

MOULDED

PULTRUDED

FIXING CLIP

FRP L-CLAMP ASSEMBLY

FRP M-CLAMP ASSEMBLY

Please see the “GRATING WORLD a world of grating solutions” brochure for complete details



MOULDED

PULTRUDED

FIBREGLASS GRATING - MOULDED & PULTRUDED

CODE SPAN mm APPROXMass/m2

DEPTH PITCH 300 400 500 600 750 900 1000 1250

U C U C U C U C U C U C U C U C

M25 25 38 x 38 3364 611 1325 356 715 244 448 163 12.3

M30 30 38 x 38 5813 1055 2289 615 1235 421 774 281 395 202 14.6

M38 38 38 x 38 7840 1467 3260 825 2202 682 1274 479 713 326 458 241 336 225 19.0

M50 50 50 x 50 14271 2790 6610 1569 3862 1207 2747 1070 1529 713 917 509 713 408 408 306 21.5

GRATEX® FRP FIBREGLASS GRATING - MOULDED & PULTRUDEDLOAD/SPAN TABLES

IMPORTANT NOTES1. U, kg/m2, maximum allowable unfactored uniformly distributed loading for that stated span2. C, kg/m, maximum allowable unfactored centre line load per metre3. Load/Span Tables based on elastic deflections of span/200 or 10mm, whichever the lesser when subjected to the specified unfactored load4. All table loadings to be taken as nominal and should not be used as guaranteed values5. Appropriate safety factors must be applied by the designer

CODE BEARER BAR BEARER BAR SPAN mm APPROXMass/m2

DEPTH PITCH 300 400 500 600 750 900 1000 1200 1500 1750

mm mm U C U C U C U C U C U C U C U C U C U C

P2538 25 38 17125 3160 7240 1835 4077 1815 2447 918 1264 581 754 428 550 347 326 245 11

P3838 38 38 43425 8155 18247 4587 16805 3364 6320 2345 3466 1519 2140 1193 1529 968 948 704 489 449 326 300 16

MOULDED

PULTRUDED

Suggested Range

FIXING CLIP

FRP L-CLAMP ASSEMBLY

FRP M-CLAMP ASSEMBLY

FRP C-CLAMP ASSEMBLY

FRP GRATING L-CLAMP ASSEMBLY

FRP GRATING M-CLAMP ASSEMBLY

FRP GRATING C-CLAMP ASSEMBLY

FRP GRATEX® M/P 12

Please see the “GRATING WORLD a world of grating solutions” brochure for complete details

GRATING WORLD (Pty) Ltd132 Terrace Road Sebenza Edenvale

P O Box 9748 Edenglen 1613 South AfricaTel +27 (0)11 452 1150/456 5250 Fax: +27 (0)11 452 2536

[email protected] www.gratingworld.co.za2 Leopard Street Paarden Eiland Cape Town 7420Tel +27 (0)21 511 0280 [email protected]

a world of FRPstructural solutions

Information is supplied upon the condition that persons will make their own determination as to its suitability for their purposes prior to use. Grating World (Pty) Ltd will not be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information

from this publication or the products to which the information refers. August 2014

Documents

FRP STRUCTURAL PRODUCTS - Grating World