----------------------------------- Tom Tom Voices for TT Go,
Classic, 300, 500, 700 & Navigator Software level 5 and
above.The following instructions are as easy as possible, but
should you have any problems, call your Mum.These voices have been
tested on all TomToms (Classic, Go, 300, 500, 700 &
Navigator).-----------------------------------.:INSTRUCTIONS FOR
TOMTOM GO/one ONLY: -----------------------------------A. You will
need to extract/unzip the files to a folder on your PC (a good idea
is to make a new folder, for example, "C:\tomtom").B. Switch on
your TomTom.C. Connect your tomtom go to the computer with your USB
cable.i.e. Click the Start logo [usually] at the bottom left of
your screen & then click on "my computer" and you should see
the tomtom under Devices with Removable Storage with a small
icon.Double click on the icon and the Tom Tom's folder view will
open.D. If you have a folder labelled "voices", double click it.
Then proceed to step F, otherwise goto Step EE. You need to store
you voice files in the root folder (the first folder you see, after
following Step C).F. Copy any of the voice **files** from the
folder (not the folder) and paste into the folder selected in steps
D or E (i.e. copy all the files from that folder: data96.chk and
data96.bmp and data96.vif).G. Repeat for as many voices as you
like.H. After pasting the last voice wait about 30 seconds (after
copying has completed) and then remove your USB cable.I. Your
TomTom will now re-boot and the voices will be available to select.
With pictures making you selection simple!To change a voice on your
TomTom:1. Click in the centre of the screen:2. Click "Change
Preferences "3. Click the right arrow, three times.4. Now Click
"Change Voice"5. Use the right and left buttons to scroll around
your available voices.
-----------------------------------.:INSTRUCTIONS FOR PDA TOMTOM
ONLY: -----------------------------------1. Follow the instructions
above.2. IF THAT FAILS: Copy the voice files into the "tomtom"
folder under "mobile device/my documents".3. Ensure for each voice
that you copy the 3 files (dataXX.vif, dataXX.chk &
dataXX.bmp).4. For Nokia 6600 Users: Aparrently it needs 16kbit
datastream voice files, use a file splitter and then convert the
ogg files from 22kbit to 16kbit and assemble them again.If Locutio
made these 3.99 these would be shifting more than their server
could handle...now open source instead.Happy and safe
travelling,Acideax
