Upload
dodan
View
263
Download
0
Embed Size (px)
Citation preview
BJC HEAVY INDUSTRIES PCL.
G ALVANIZ ING
G RATING
BUILT- UP BEAM
With the company’s slogan as “New Force in Heavy Industries”, BJCHI is fully committed in taking on that responsibility and to become one of the world-class integrated engineering, procurement, fabrication and modularization (SMP E&I) service provider.
Throughout the years since the establishment in 1994 - BJCHI have exceeded global expectation and performed with excellence to every client’s need.
BJCHI value have grown exponentially and have been recognized as an experienced and reliable manufacturer in various fields including pre-cast concrete services, galvanizing, grating, built-up beams and in many other fields.
1994 - Established in Mapthaphut, Rayong2001 - Relocated to Nikompattana with expansion of capacity up to 550,000 sqm2002 - Certified ISO 9001 (TUV NORD)2011 - Certified ISO 14001 & OHSAS 18001 (TUV NORD)2013 - Established Galvanizing Shop and Grating Shop - Included in the Top 100 Stock Exchange of Thailand and MSCI Global Small Capital Index2014 - Established Built-up Beam Shop
BJC HEAVY INDUSTRIES PUBLIC COMPANY LIMITED
BRIEF COMPANY HISTORY
2
BJC HEAVY INDUSTRIES PUBLIC COMPANY LIMITED
CONTENTS
1. GALVANIZING SHOP 04
2. GRATING SHOP 08
3. BUILT-UP BEAM SHOP 12
3
BJC HEAVY INDUSTRIES PUBLIC COMPANY LIMITED
01 GALVANIZING SHOPCAPACITY FACILITY AND ENVIRONMENTALGALVANIZING STANDARDBENEFITS OF GALVANIZINGGALVANIZING PROCESSMAJOR CLIENTS
BJCHI has built one of Thailand’s largest zinc galvanizing shop.
With the intention to accommodate the increasing galvanizinginternal and external demands – BJCHI have successfully fulfilled those demands since the completion of the shop in 2013.
As safety for the employees and the surrounding environment is one of the many priorities of BJCHI – The Galvanizing Shop is in possession of an advanced air ventilation system for the employees and strict procedures for waste disposal to minimize the impact to the surroundings.
GALVANIZING SHOP
CAPACITY FACILITY AND ENVIRONMENTAL
Capacity Facility Environmental
Capacity: 3,500 Tons / MonthKettle Size: 13(L) x 2(W) x 2.7(H) MetersAutomatic Winch System: 6 unit with control roomOverhead cranes: 2 cranes of 10 Metric Tons 2 Cranes of 6 Metric Tons 1 Crane of 3 Metric Tons
Facility Size: 28,000 Square MetersFactory Size: 3,500 Square MetersStockyard Size: 5,200 Square Meters
Bag filter system: Fume zincWet scrubber: 3 Sets of fume scrubbersWaste storage tank: 240 cubic meters
5
G ALVANIZ ING SHOP
The use of galvanizing provides numerous benefits to steel products including lower maintenance cost and the reliability for longer service.
GALVANIZING STANDARD
ASTM A123 (2000)Standard specification for zinc coating on iron and steel products
BS EN ISO 1461:1999Standard specifications for coating on fabricated iron and steel products
AS/NZS 4680:2006Standard specifications for coating on fabricated ferrous articles
ASTM A153/A153MStandard specifications for zinc coating on iron and steel hardware
1
3
2
4
BENEFITS OF GALVANIZING
6
GALVANIZING SHOP
GALVANIZING PROCESS
MAJOR CLIENTS
Surface preparation is the most important step in the application of coating. Failures in surface preparation will be apparent when the steel is withdrawn from the molten zinc.
A hot alkali solution is used to removeorganic contaminants such as dirt, paint markings, grease and oil from the metal surface by grit-blasting, sand-blasting or other mechanical means.
SURFACE PREPARATION CAUSTIC CLEANING
Scale and rust are removed from the steel surface by pickling in a dilute solution of 18% by volume hydrochloric acid.
PICKLINGFluxing removes oxides and prevents further oxides from forming on the surface of the metal prior to the galvanizing
FLUXINGFabricated items are immersed in the galvanizing bath until they reach the bath temperature. The zinc metal reacts with the iron on the steel surface to form a zinc/iron intermetallic alloy.
GALVANIZING
7
GALVANIZING SHOP
02 GRATING SHOPMATERIAL TYPE / GRADESTEEL GRATING PATTERNSSURFACE TYPESTYPE OF STAIR TREADSTREATMENT AND COLORS
BJCHI has built one of Thailand’s most reliable grating factory with possession of a full line of pressure welding and accessory equipment.
With the intention to accommodate the increasing in gratingdemands – BJCHI annual capacity of 5,000 tons can ensure the client’s demand whether they are internal or externaldemands.
Continued Investments have increased automation and capabilities to fabricate a wider range of specification.
GRATING SHOP
MATERIAL TYPE / GRADE
Mild SteelMaterial grades ASTM A36 and Grade 250 or equivalent
Stainless SteelASTM A240-340, 316
1
2
9
G RATING SHOP
STEEL GRATING PATTERNS
SURFACE TYPES
Plain Surface Serrated Surface
Budget %
Bearing Bar Size 25 x 5 32 x 5 40 x 5
A & B Pattern 900 1300 1600
C & D Pattern 750 1200 1500
E Pattern 500 800 -
Recommended Max. Span (mm)
PATTERN A. PATTERN D.
PATTERN B. PATTERN F.
PATTERN C.
10
G RATING SHOP
BJCHI can manufacture any length and width from any type of stair tread gratings to meet your specifications. Floor plate nosing and yellow abrasive nosing for extra grip can also be manufactured.
TYPE OF STAIR TREADS
Galvanized Painted Black (Untreated)
TREATMENT AND COLORS
No Nosing Type 1
No Nosing Type 2
Plate Nosing Type 1 Abrasive Nosing Type 1
Plate Nosing Type 1 Abrasive Nosing Type 2
11
G RATING SHOP
03 BUILT-UP BEAM SHOPH-BEAM STANDARDSMACHINERIESH-BEAM PRODUCTION PROCESS
BJCHI completed its built-up beam shop in 2014 with the intentions of accommodating the high demands of beams.
The built-up beam production line has a capacity of 25,000 Tons per annum and possesses highly automated machine and equipment for plate cutting, T-Shape and H-Shape assmbly.
The current technical capabilities of the built-up beam shop enables BJCHI to fabricate nearly all beam specifications required by the clients.
BUILT-UP BEAM SHOP
H-BEAM STANDARD
100 x 100 100 X 100 6 8 10 21.90 17.2 383 134 4.18 2.47 76.5 26.7
125 x125 125 X 125 6.5 9 10 30.31 23.8 847 293 5.29 3.11 136 47.0
150 X 150 150 X 150 7 10 11 40.14 31.5 1640 563 6.39 3.75 219 75.1
175 x 175 175 x 175 7.5 11 12 51.21 40.2 2880 984 7.50 4.38 330 112
200 x 200 200 x 200 8 12 13 63.53 49.9 4720 1600 8.62 5.02 472 160
250 x 250 250 x 250 9 14 16 92.18 72.4 10800 3650 10.8 6.29 867 292
300 x 300 300 x 300 10 15 18 119.8 94.0 20400 6750 13.1 7.15 1360 450
350 x 350 350 x 350 12 19 20 173.9 137 40300 13600 15.2 8.84 2300 776
400 x 400 400 x 400 13 21 22 218.7 172 66600 22400 17.5 10.1 3330 1120
Standard Sectional Dimension
NominalSectional
Areacm2
Weightkg/m Geometrical
Moment ofInertia cm4
Radius ofGyration
of Area cm
Modulus ofSection cm3H x B t1
ix ix zxiy iy zy
t2 rSize
Reference(mm)
H-BEAMJIS G 3192 : 1990 / TIS 1227:1996
13
BUILT- UP BEAM SHOP
Rounding Machine
Centering Machine
Mobile Turning Machine
Assembly Machine
Turning Machine / Lifting Machine
Straightener
MACHINERIES
14
BUILT-UP BEAM SHOP
H-BEAM PRODUCTION PROCESS
Drilling the holes into the H-beam.
Cutting the steel plates in order to weld the 3 pieces together to become an H shape.
Hole Drilling
Plate cutting
Trimming off the excess edges of the H-beam.
Assembling and welding the 3 plates to become an H shape.
Edge Processing
H-beam assemble
Straightening the beam in order to ensure that the material is according to the requirement.
Turning the pre-welded H-beam to weld it all round.
Straightening
Overturn
15
BUILT-UP BEAM SHOP
BJC HEAVY INDUSTRIES PCL.
ADDRESS
594 Moo 4, Makhamkoo Sub-district
Nikompattana District
Rayong 21180, Thailand
PHONE
Galvanizing
Grating
Built-up Beam
: +66 (0) 38 950 242-3
: +66 (0) 38 950 244
: +66 (0) 38 893 709