Gamer Workshop Special Oct 2015 - Feb 2016

New Products page 2

Air Tools page 10

Clean-Up Tools page 18

Air Tools Accessories page 19

Hand Tools page 26

Engineering Equipment page 31

LIQUIDATION SALE! page 34

3/8 Stainless Steel Burr 3 Piece Set• New design burr optimised specially

for stainless steel.

Shank Dia: 1/4”PN: CBSET3INOX

$129.00See full range on page 22.

See full range on page 11.

NEW!

1” Super Duty Impact Wrench• Muffled Exhaust

• Muli Position Handle

Free Speed: 5,000 RPM Max. Torque: 1,800 Ft/Ibs Length: 275 MM Weight: 7.10 Kg

PN: KP1838A-P

$1,100.00

NEW!

NEW RANGE!

P R O F E S S I O N A L S P R A Y G U N S

2.6 mm Mini Quick Release Handle

• Handle only 100 MM long • Holds all 2.6 MM Ø Deburring Blades.

PN: GDMC1

$14.00Heavy Duty Air Scaling Hammer

PN: KP4733

699.00

Heavy Duty Coil Nailers

HVLP Gravity & Suction Feed Spray Guns

®

®

200 mm Coolant Proof IP54 Dual Scale Digital Caliper

PN: AC-111-008-11

$140.00



NEW HVLP RANGE!

NEW!

NEW!




• Optional Side Handle Included

Impact Rate: 2,400 BPM Piston Stroke: 26 MM Length: 550 MM Weight: 4.0 Kg

• Highly accurate glass scale • USB data output • Meet DIN862 Standard

HVLP Gravity feed spray guns are now available in 1.3 mm, 1.4 mm & 1.8 mm nozzle sizes.

HVLP Suction feed spray guns are now available in 1.8 mm & 2.0 mm nozzle sizes.

$299 EA

Heavy Duty 15° Coil NailerNail Shank: 2.1-2.8 MM Fastener Length: 32-65 MM Angle: 15 Degrees Capacity: 200-400 nails Weight: 2.0 Kg

PN: BC2865D1

$599.00

Heavy Duty 0° Coil NailerNail Shank: 2.03-2.8 MM Fastener Length: 32-65 MM Angle: Flat 0 Degrees Capacity: 200-400 nails Weight: 2.3 Kg

PN: BC2865F1

$599.00

Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.

USB DATA OUTPUT

Quickly and accurately acquire data points via Mini USB cable. Data can be transfered directly into Excel with no additional software required.

Metric Dial Calipers Dual Scale Economical Digital Calipers

150 mm Plastic Dial Caliper PN: AC-117-006-11

$30.00

Coolant Proof IP67 Dual Scale Digital Calipers

Coolant Proof IP54 Dual Scale Digital Calipers

• Shockproof Measures: Inside, Outside & Depth

Functions: zero point, mm/inch Measures: Inside, Outside & Depth • USB data output • Meet DIN862

Functions: mm/in, zero point Measures: Inside, Outside • Made of hard plastic

• IP67 protection level Measures: Inside, Outside & Depth Functions: zero point, mm/inch

Functions: zero point, mm/in, ABS Measures: Inside, Outside & Depth • Highly accurate glass scale • USB data output • Meet DIN862 Standard

Functions: zero point, mm/inch, ABS, data preset Measures: Inside, Outside• USB data output

150 mm Metric Dial CaliperRange: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16.5 mm Ext. Jaw Reach: 40 mm

200 mm Metric Dial CaliperRange: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

300 mm Metric Dial CaliperRange: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Int. Jaw Reach: 25 mm Ext. Jaw Reach: 64 mm

PN: AC-101-006-11

$102.00PN: AC-101-008-11

$128.00PN: AC-101-012-11

$220.00

150 mm Dual Scale Digital CaliperRange: 0-150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm

200 mm Dual Scale Digital CaliperRange: 0-200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

300 mm Dual Scale Digital CaliperRange: 0-300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm

PN: AC-111-006-12

$79.00PN: AC-111-008-12

$115.00PN: AC-111-012-12

$180.00

Range: 0-150mm/0-6” Resolution: 0.01mm/0.0005” Accuracy: ±0.1mm

150 mm Dual Scale Coolant Proof Digital CaliperRange: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm

200 mm Dual Scale Coolant Proof Digital CaliperRange: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

300 mm Dual Scale Coolant Proof Digital CaliperRange: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm

PN: AC-112-006-12

$249.00PN: AC-112-008-12

$335.00PN: AC-112-012-12

$479.00

150 mm Dual Scale IP54 Digital CaliperRange: 0-150 mm/0-6” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 16 mm Ext. Jaw Reach: 40 mm

200 mm Dual Scale Digital CaliperRange: 0-200 mm/0-8” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

300 mm Dual Scale Digital CaliperRange: 0-300 mm/0-12” Resolution: 0.01 mm/0.0005” Accuracy: ±0.03 mm/0.001” Int. Jaw Reach: 20.5 mm Ext. Jaw Reach: 60 mm

PN: AC-111-006-11

$110.00PN: AC-111-008-11

$140.00PN: AC-111-012-11

$215.00

600 mm Dual Scale Digital CaliperRange: Outside 0-620 mm/0-24.5” Inside 20-600 mm/0-24” Resolution: 0.01 mm/0.005” Accuracy: ±0.05 mm/0.002” Jaw Reach: 100 mm

1000 mm Dual Scale Digital CaliperRange: Outside 0-1020 mm/0-40.2” Inside 20-1000 mm/0-40” Resolution: 0.01 mm/0.005” Accuracy: ±0.08 mm/0.003” Jaw Reach: 150 mm

PN: AC-118-024-11

$549.00PN: AC-118-040-11

$1,125.00

USB DATA OUTPUT

USB DATA OUTPUT

USB DATA OUTPUT

USB DATA OUTPUT

Caliper Depth Base Attachment

PN: AC-179-000-00

$35.00

For calipers to increase the stability of depth measurementFor all calipers which range are 150 mm and 200 mm (beam width is 16 mm)Made of stainless steel

AB•S All ACCUD digital measuring devices utilize an Absolute Scale encoding system. This system ensures quick, accurate and reliable measurements in all working environments.

Page 2 - New Products

Dual Scale Vernier Calipers

Measures: Inside, Outside & Depth • Meet DIN862 Standard• Stain chrome plated reading surface • Made of stainless steel

Measures: Inside, Outside • With fine adjustment • Stain chrome reading surface

Measures: Inside, Outside • Meets DIN862 Standard

150 mm Metric Vernier CaliperRange: 0-150 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 15.5 mm Ext. Jaw Reach: 40 mm

200 mm Metric Vernier CaliperRange: 0-200 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.03/0.001” Int. Jaw Reach: 19 mm Ext. Jaw Reach: 50 mm

300 mm Metric Vernier CaliperRange: 0-300 mm Graduation: 0.05 mm/0.001” Accuracy: ±0.04/0.002” Int. Jaw Reach: 22 mm Ext. Jaw Reach: 64 mm

PN: AC-120-006-12

$56.00PN: AC-120-008-12

$84.00PN: AC-120-012-12

$138.00

600 mm Metric Vernier Long Jaw CaliperRange: Outside 0-620 mm/0-24.5” Inside 20-600 mm/0-24” Graduation: 0.002 mm/0.001” Accuracy: ±0.08 mm/0.003” Ext. Jaw Reach: 250 mm Int. Jaw Reach: 24 mm

Available in

2016

600 mm Metric Vernier CaliperRange: Outside 0-620 mm Inside 20-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm/0.002” External Jaw Reach: 100 mm Int. Jaw Reach: 18 mm



PN: AC-127-024-11

$315.00PN: AC-127-040-11

$899.00Available in

2016Dial Indicator & Micrometers Stands

Dial Test Indicator Centering HolderDial Test Indicator Centering Holder. For centering of cylinders or holes.

PN: AC-269-060-01

$29.00

Magnetic Indicator Stand with Fine adjustmentØ8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf Fine adjustment.

Magnetic Indicator StandØ8mm, Ø4mm, 3/8” Stem holes Magnetic Force: 60 kgf

PN: AC-281-060-01

$45.00PN: AC-281-060-02

$40.00

Magnetic 10 mm Dial Gauge Base KitMagnetic 10 mm Dial Gauge base kit

100 mm Micrometer StandMicrometer Stand suits micrometers that measure up to 100 mm.

PN: AC-280-000-02

$119.00

PN: AC-381-000-00

$39.00

Metric Dial & Dual Scale Digital Indicators

Metric Dial Test Indicators & Stands

PN: AC-261-008-11

$110.00

Functions: zero point, Invert measuring, inch/mm direction, data preset, ABS • USB data output • Supplied with flat and lug back

• 0.01 mm Graduations • Jeweled bearing• Carbide stylus• Double scale spacing• Anti-magnetic copper body • 4 mm & 8 mm Dia clamps.

• Limit hands• Jeweled bearing• 1 mm range per dial revolution• Lug back

Dual Scale Digital IndicatorRange: 12.7 mm/0.5” Resolution: 0.01 mm/0.0005” Accuracy: 20 μm

Jeweled Bearing Metric Dial IndicatorRange: 10 mm Accuracy: 20 μm

PN: AC-212-010-11

$245.00PN: AC-222-010-11

$380.00

Range: 0.8 mm Graduation: 0.01 mm Accuracy: ±13 μm

USB DATA OUTPUT

150 mm Metric Depth Micrometer

PN: AC-391-006-01

$245.00

Micrometer head accuracy: ±3μm Rod accuracy: ±(2+L/75)μm, L is the measuring range in mm Supplied with rods Ratchet stop

Range: 0-150mm Accuracy: ±31μm Base Span: 101.5 mm Base Width: 17 mm


Metric Micrometer Sets

Metric Outside Micrometers

Combination Square Set

PN: AC-817-180-02

$199.00

50-600 mm Metric Tubular Inside Micrometer

PN: AC-352-024-01

$375.00

• Carbide measuring faces • Ratchet stop

Supplied with setting standards Carbide measuring faces

75 mm Metric Micrometer 3 Piece SetSet consists of 3 Micrometers Range: 0-75 mm Graduation: 0.01 mm Accuracy: 5 μm

150 mm Metric Micrometer 6 Piece SetSet consists of 6 Micrometers Range: 0-150 mm Graduation: 0.01 mm Accuracy: 5 μm

PN: AC-321-003-03

$185.00PN: AC-321-006-06

$380.00

25 mm Metric Outside MicrometerRange: 0-25 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 29 mm

25-50 mm Metric Outside MicrometerRange: 25-50 mm Graduation: 0.01 mm Accuracy: 4 μm Jaw Reach: 39 mm

PN: AC-321-001-01

$45.00PN: AC-321-002-01

$50.00



PN: AC-321-003-01

$59.00PN: AC-321-004-01

$64.00

Protractor: Used to set or make an angle measurement, Range: 0-180° Accuracy: ±7’Square: Used as 90° or 45° square 90° square accuracy: ±8’, 45° square accuracy: ±10’Rule: Used as rule, range: 300 mm/12” Center finder: Used to find the cylinder center, Accuracy: ±0.15 mm

Set consists of 13, 25, 50, 100, 150 & 200 mm Extension Rods. Micrometer Head Travel: 13 mm Range: 50-600 mm Graduation: 0.01 mm Accuracy: (3+n+L/50) μm, n=number of rods, L=max. measuring length

25 mm Coolant Proof Dual Scale Digital Micrometer

PN: AC-313-001-01

$215.00

Functions: mm/inch, origin, zero point, ABS, hold, data export • IP65 protection level • Carbide measuring faces • Ratchet stop.

Range: 0-25 mm/0-1” Resolution: 0.001 mm/0.00005” Accuracy: 2 μm Jaw Reach: 24 mm

USB DATA OUTPUT

Metric Dial Bore Gauges

• Meets DIN862 Standard

50-160 mm Metric Dial Bore GaugeRange: 50-160 mm Graduation: 0.01 mm Accuracy: ±0.018 mm Length: 141 mm

PN: AC-251-160-11

$225.00

18-160 mm Metric Dial Bore Gauge SetSet consists of 18-35 mm, 35-60 mm & 50-160 mm Bore Gauges & Dial IndicatorDial indicator Range: 10 mm

Graduation: 0.01 mm

PN: AC-251-346-13

$579.00

Dual Scale Vernier Height Gauges

• Move main scale to set zero with adjustable scale• Carbide tipped scriber• Satin chrome plated scale• Vernier magnifier

300 mm Metric Vernier Height GaugeRange: 0-300 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.04 mm Slide Rail Width: 28 mm Length: 545 mm

PN: AC-186-012-11

$349.00

600 mm Metric Vernier Height GaugeRange: 0-600 mm Graduation: 0.02 mm/0.001” Accuracy: ±0.05 mm Slide Rail Width: 35 mm Length: 870 mm

PN: AC-186-024-11

$479.00



Suprabeam warrants its products to be free from defects in materials and workmanship. Any product or part which is found to be defective under normal use will be repaired or replaced.

Miniature Torch

PN: SBQ1MINI

$55.00

The Ultimate Miniature

PN: SBQ2

$85.00

Compact & Powerful

PN: SBQ3

$85.00

Tactical Extreme Power

PN: SBQ7C

$129.00

3 Hour battery life 1 x AAA

Beam: Spot 5° Flood 65°

Body: Double Anodized Aluminium Brightness: 80 Lumens Beam: Focus by rotating Weight: 38 G Size: 98 MM x Ø15 MM

6 Hour battery life 1 x AA or NiMh


Body: Double Anodized Aluminium Brightness: 120 Lumens Beam: Hyperfocus by sliding Weight: 80 G (inc batteries) Size: 116 MM x Ø26 MM Complete with durable pouch

10 Hour battery life 3 x AAA


Body: Double Anodized Aluminium Brightness: 280 Lumens Beam: Hyperfocus by sliding Weight: 99 G Size: 115 MM x Ø26 MM Complete with durable pouch

8 Hour battery life 4 x AAA or NiMh


Body: Double Anodized Aluminium Brightness: 350 Lumens Beam: Hyperfocus by sliding Weight: 196 G (inc batteries) Size: 134 MM x Ø39 MM Complete with durable pouch

120 Lumens

280 Lumens

350 Lumens

80 Lumens

Light Weight Headlamp

PN: SBV3AIR

$89.00

Rechargeable & Compact

PN: SBQ3R

$225.00

Rechargeable & Powerful

PN: SBQ4XR

$279.00

Rechargeable & Powerful

PN: SBQ7XR

$339.0020 Hour battery life Spot 5° Flood 60° 3 x AAA

Body: Anodized Aluminium/Plastic Brightness: 250(Boost) 15-150 (Dimmer) Beam: Hyperfocus by sliding floodlight spotlight to 220m range Headband: fits 50-70 cm Battery: 3 x AAA: 20h life Weight: 140 G inc battery

3-6 Hour battery life Beam: Spot 5° Flood 60°

Li Ion 18650 Rechargeable (spare battery included)

Body: Double Anodized Aluminium Brightness: 400 Lumens (on Boost) 250 Lumens (on high) 50 Lumens / Low and Strobe Beam: Hyperfocus by sliding Weight: 139 G inc battery Size: 127.7 MM x Ø26.5 MM



Body: Double Anodized Aluminium Brightness: 680 Lumens (on Boost) 350 Lumens (on high) 50 Lumens / Low and Strobe Beam: Focus by sliding Weight: 132 G inc battery Size: 134 MM x Ø32 MM



Body: Double Anodized Aluminium Brightness: 900 Lumens (on Boost) 400 Lumens (on high) 170 Lumens / Low and Strobe Beam: Focus by sliding Weight: 307 G inc battery Size: 150 MM x Ø46 MM

250 Lumens

400 Lumens

900 Lumens

680 Lumens

20 Hour battery life Spot 5°

Flood 60° 4 x AAA

Body: Anodized Aluminium/plastic Lumens: 320(high) 30 (reduced) Beam: Hyperfocus by sliding floodlight - spotlight to 180 m range Headband: fits 50-70cm Battery: 3 x AAA: 20h life Weight: 160 G inc battery

C/W durable pouch, washable headband

20 Hour battery life Spot 6°

Flood 60° Li-ion Rechargeable

Body: Anodized Aluminium/plastic Brightness: 400 Lumens (on boost) 200 Lumens (on high) 20 Lumens (reduced) Beam: Hyperfocus by sliding floodlight - spotlight to 180 m range Headband: Fits 50-70cm Battery: LI-ion: 20h life Weight: 184 G (Including battery)

C/W durable pouch, washable headband

Head Light PN: SBV3

$119.00Rechargeable Head Light

PN: SBV3R

$239.00

Bike AttachmentSuits for the Q3 torch

Traffic Wand PN: SBQ3W

The Q3 Traffic Wand for those unexpected emergencies.

Flood Light AttachmentConvert your torch or head torch into a compact flood light for workshop, car or camping. Suits SBQ3, SBQ3R, SBV3 & SBV3R

Q3 / V3 Colour FiltersIncludes Blue, Red, Green & Yellow filters.

PN: SBBIKEHOLDER

$22.00

PN: SBQ3W

$15.00

PN: SBCAMPINGBULB

$22.00

PN: SB3CF

$49.00

Suprabeam Accessories

320 Lumens

400 Lumens

FREE FLOOD LIGHT ATTACHMENT

FREE FLOOD LIGHT ATTACHMENT

K320 Gravity Feed 1.2 MM Spray Gun

Nozzle: 1.2 MM S-Steel Pattern Width: 140 MM Air Cons.: 3.2 cfm Fluid Output: 100 ML

PN: K320M12


NEW!Working Pressure: 30-45 PSI Fluid Capacity: 125 CC Fluid Feed: Gravity Fluid Inlet: M15 Weight: 280 G

• Chrome & Nickel-plated aluminum body.

• High grade stainless steel nozzle & needle.

• Teflon seals & packing.• Suitable for both oil and

water-based painting.

P R O F E S S I O N A L S P R A Y G U N S

K320 Mini Gravity Feed Spray Guns

K818 Gravity Feed Spray Guns

K818 Suction Feed Spray Guns

Short fluid passages offer quicker cleaning and maintenance.Gravity feed requires less air pressure to drive fluid feed, resulting in a higher quality finish across a wide fluid viscosity range.

Suction provides a mild agitating action to the fluid as the gun is being used. Suction Feed Spray Guns can carry larger amounts of paint while retaining gun stability.The configuration of the fluid pot offers access to tighter working spaces. Achieves quality finishes with light viscosity paints or stains.Suitable for adhesive coatings, specialised coatings or textured finishes.

Working Pressure: 30-45 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: M14 × 1.0P Weight: 514 G

• Forged aluminum body with smooth anodised finish for easy cleaning.

• Suitable for low viscosity oil and water-based painting.

• High grade stainless steel nozzle & needle for easy cleaning & long service life.

• Complies to CE standards• Teflon seals & packing.

Working Pressure: 30-45 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M14 × 1.0P Weight: 280 G

• Exceptional fluid atomization.• Forged aluminum body with

smooth anodised finish for corrosion resistance & easy cleaning.

• Teflon seals & packing.• Suitable for both oil and

water-based painting.• High grade stainless steel

nozzle & needle for easy cleaning & long service life.

• Complies to CE standards.



PN: K320M08$179 EA


Applications: 2-Pack, Metallics, Enamel, Stain


PN: K818M13


Applications: 2-Pack, Metallics, Enamel, Stain


PN: K818M14


Applications: 2-Pack, Metallics, Acrylic, Enamels, Primer, Stains.


PN: K818M18


Applications: Heavy viscosity fluids, Glue, Spray Putty.


PN: K818M25

K818 Suction Feed 1.3 MM Spray Gun

Applications: 2-Pack, Metallics, Enamels, Polyurethanes.


PN: K818S13


Applications: Heavy viscosity fluids, Acrylics, Enamels, Primer, Glue, Stains.


PN: K818S20


Applications: Heavy viscosity fluids, Glue, Spray Putty.


PN: K818S25

$259 EA

$259 EA


Applications: Acrylics, Enamels, Stains.

• Side mount adjustable fluid pot.• Chrome-plated metal body for

easy cleaning.• Suitable for both oil and water-

based painting.

SG420 Gravity Feed Air Brush

KH818 Gravity Feed HVLP Spray Guns

KH818 Suction Feed HVLP Spray Guns

The combination of HVLP technology and gravity feed spray guns offers many benefits. High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The benefit of this technology is a more efficient transfer of paint, while consuming less air. The configuration of gravity feed spray guns provide a constant supply of fluid pressure to the spray cap, offering the ability to work with both light and heavy viscosity fluids.

The main advantage of Suction Feed Spray Guns is that they can carry larger amounts of paint while retaining gun stability. Suction Feed Spray Guns are suitable for adhesive coatings, specialised coatings or textured finishes. High Volume Low Pressure (H.V.L.P.) technology achieves finer atomisation while using less air pressure (as low as 10 PSI). The configuration of suction feed pots provide a mild agitating action to the fluid as the gun is being used.

SG420A air brush is suitable for fine touch-up and custom detailing applications. All metal parts with high quality stainless steel nozzle and needle for easy cleaning. Achieve high levels of control with this fully adjustable gravity feed air brush.

SG420A Gravity Feed Air BrushNozzle: 0.3 MM Working Pressure: 14-50 PSI Air inlet: 1/8” Fluid Output: 7 CC Fluid Capacity: 7 CC Fluid Feed: Gravity Weight: 280 G

PN: SG420A

$110.00

KH818 Suction Feed 1.8 MM Spray Gun

Applications: Acrylics, enamels, polyurethanes, Metallics, Lacquers.


PN: KH818S18

KH818 Suction Feed 2.0 MM Spray Gun

Applications: Acrylics, Glue, enamels, polyurethanes, Metallics, Lacquers, Primer.


PN: KH818S20

KH818 Gravity Feed 1.3 MM Spray Gun

Applications: 2 Pack, stains, enamels, polyurethanes


PN: KH818M13


Applications: 2 Pack, stains, enamels, polyurethanes


PN: KH818M14


Applications: Acrylics, enamels, Metallics, Lacquers


PN: KH818M18

$299 EA

$299 EA

Working Pressure: 20~28 PSI Fluid Capacity: 600 CC Fluid Feed: Gravity Fluid Inlet: M16 Weight: 514 G

• Exceptional fluid atomization.• Forged aluminum body with

smooth anodised finish for corrosion resistance & easy cleaning.

• Teflon seals & packing.• Includes mini air regulator

• Suitable for both oil and water-based painting.


• Complies to CE standards.

Working Pressure: 20-28 PSI Fluid Capacity: 1000 CC Fluid Feed: Suction Fluid Inlet: 3/8” Weight: 514 G

• Forged aluminum body with smooth anodised finish for easy cleaning.

• Includes mini air regulator• Suitable for low viscosity oil

and water-based painting.



NEW HVLP RANGE!

NEW HVLP RANGE!

Suction provides a mild agitating action to the fluid as the gun is being used. Suction Feed Spray Guns can carry larger amounts of paint while retaining gun stability.The configuration of the fluid pot offers access to tighter working spaces. Achieves quality finishes with light viscosity paints or stains.Suitable for adhesive coatings, specialised coatings or textured finishes.



NEW PRODUCTS NEW PRODUCTSP R O F E S S I O N A L S P R A Y G U N S


Pressure Feed Spray Gun SystemsSpray large quantities of fluid without the need to refill a smaller gun-mounted pot. Another benefit of pressure feed systems is a lighter and easier to handle spray gun. Pressure Feed Spray Gun Systems includes fluid tank, hose and Prowin K818 Spray Gun with your choice of 1.2, 1.5, 1.8, 2.0 or 2.5 MM nozzle. See spray gun specications at the bottom of the page.

Features:• Tank Pressure Regulator• Air release valve• Safety release valve• Tank handle/hanger• Complies to CE standards

Features:• 3 meter hose • Tank Pressure Regulator• Air release valve• Safety release valve• Tank handle/hanger• Complies to CE standards

2 Litre Pressure Feed TankHose: 8 MM ID x 3 M (PU+Nylon)Tank dimensions: 130L MM x 130W MM x 445H MM

Capacity: 2 LitreTank: AluminiumMax. pressure: 60 PSI

Weight total: 2.15 Kg

10 Litre Pressure Feed TankHose: 8 MM ID x 3 M (PU+Nylon)Tank dimensions: 315L MM x 315W MM x 485H MM


Weight total: 10.1 Kg

2 Litre Pressure Feed Spray Gun System

$499 EA

Pressure Feed Spray Guns

10 Litre Pressure Feed Spray Gun System

$695 EA

20 Litre Pressure Feed Spray Tank SystemThe design of a pressure feed spray system offers a lighter and easier to handle spray gun and the ability to spray large quantity of fluid without the need to refill a smaller gun-mounted pot. The 20 Litre Pressure Feed Spray Tank System includes a Prowin K818 1.8 MM Spray Gun, 20 litre fluid tank with manual agitation and 10 Meter supply hose.

$1395 EA

Features:• 10 meter hose• Stainless Steel Liner • Tank Pressure Regulator• Air release valve• Safety release valve• Manual Agitation• Complies to CE standards

K818 Pressure Feed 20 Litre Pressure Feed TankHose: 8 MM ID x 10 M (PU+Nylon)Tank dimensions: 400L MM x 400W MM x 780H MM


Weight total: 26 Kg

K818 Pressure Feed 1.2 MM Spray Gun

Nozzle: 1.2 MM S-SteelWorking Pressure: 30-45 PSI

Pattern Width: 300 MM

Air Cons.: 7.5 CFM

Fluid Output: 170 ML

Fluid Inlet: 3/8”




Air Cons.: 7.5 CFM


Fluid Inlet: 3/8”




Air Cons.: 7.8 CFM


Fluid Inlet: 3/8”




Air Cons.: 7.8 CFM


Fluid Inlet: 3/8”




Air Cons.: 7.8 CFM


Fluid Inlet: 3/8”

1.3 mm Nozzle PN: PW10LTRK121.5 mm Nozzle PN: PW10LTRK151.8 mm Nozzle PN: PW10LTRK182.0 mm Nozzle PN: PW10LTRK202.5 mm Nozzle PN: PW10LTRK25



NEW PRODUCTS NEW PRODUCTS


50 mm Quick-Lock Sanding Discs

$9.00 EA

50 mm Quick-Lock Mini Flap Discs $22.00 EA

75 mm Quick-Lock Sanding Discs $14.00 EA

75 mm Quick-Lock Mini Flap Discs $33.00 EA

4”″Rubber Tipped Blow Gun

• Integrated metal inlet thread

• Rubber Tip

Length: 110 MM Inlet: Japanese Compatible Fitting Material: POM/Steel

PN: GP1562

$15.00

Extendible Blow Gun• Adjustable nozzle length.

• 360° adjustable nozzle angle.

• Locking ring.

• Integrated metal inlet thread

Length: 270 to 390 MM

Inlet: Japanese Compatible Fitting

Material: POM/Steel

PN: GP1562E

$24.00

Pocket Blow Gun• Rubber Tip • Roll Throttle

Length: 115 MM Inlet: Japanese Compatible Fitting Material: Aluminium/POM PN: PBGN

$13.00

50 mm Velcro Backing PadAttaches velcro pads to tool. Backing Pad: 50 MM Shank Dia.: 1/4”

75 mm Velcro Backing PadAttaches velcro pads to tool. Backing Pad: 75 MM Shank Dia.: 1/4”

PN: GPA50

$28.00PN: GPA75

$36.00

2” Quick-Lock Preparation Kit7 Piece kit includes 1 of each: 1/4” shank, 2” backing pad, 24 Grit 2” disc, 36 Grit 2” disc, 50 Grit 2” disc, Brown (Coarse) surface prep 2” disc & Maroon (Medium) surface prep 2” disc.


PN: GPK2

$29.00PN: GPK3

$39.00

36 Grit Sanding Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012S36




40 Grit Mini Flap Discs 50 MM Quick-Lock (Pack of 5) PN: AB22012F40










Pack of 5.

Pack of 5.

Pack of 5.

Pack of 5.

TRADE QUALITYPneumatic Tools & Fasteners

Page 10 - Air Tools12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.

CUTTING, GRINDING & HAMMING TOOLS

IMPACT WRENCHES RATCHET WRENCHES

For Heavy automotive and truck work, such as tyre changing, shock, spring work and front end work where extra powerful tools are needed.

Spring RetainerSuits most Air Hammers Packet of 2.

PN: GPA70X2

$12.00

1/2’’ Impact Wrench with 2’’ Extended AnvilMax Torque: 490 Ft/lbs Free Speed: 7,500 RPM Weight: 2.87 Kg Length: 236 MM

PN: BIT242-2

$259.00

1/2” Ratchet WrenchMax Torque: 70 Ft/lbs Length: 306 MM Weight:1.3 Kg

PN: BRP207B1

$189.00

1/2” Impact WrenchFree Speed: 7,500 RPM Max Torque: 500 Ft/lbs Weight: 2.57 Kg Length: 197 MM

PN: BIT242

$239.00

1/4” Mini Ratchet WrenchMax Torque: 30 Ft/lbs Length: 182 MM Weight: 0.63 Kg

PN: BRP003B1

$169.00

1/2” Twin Hammer Impact WrenchMax Torque: 685 Ft/lb Weight: 1.94 Kg

PN: BIT260M1

$299.00

3/4” Twin Hammer Impact WrenchMax Torque: 1,100 Ft/lbs Free Speed: 5,500 RPM Weight: 5.72 Kg Length: 227 MM

PN: BIT3110

$599.00

1/4” 115° Angle Die Grinder

PN: BG230RA1

$189.00

3/8” Butterfly ImpactMax Torque: 70 Ft/lbs Free speed: 160 RPM Length: 306 MM Weight: 1.3 Kg

PN: BIK107A1

$169.00

1/4” 5” Extended Die GrinderCollet Size: 1/4" Free Speed: 21,000 RPM Length: 280 MM Weight: 0.80 Kg

PN: BG215RA1

$189.00

3/8” Impact WrenchFree Speed: 10,000 RPM Max Torque: 190 Ft/lbs Weight: 1.23 Kg Length: 158 MM

PN: BIP114A1

$199.00

1/4” Angle Die Grinder

PN: BG220RA1

$189.00

1/4” Medium Die Grinder

PN: BG210R

$159.00

2” Angle Grinder

PN: BG222RA1

$189.00

3” Cut Off Tool

PN: BCTA1

$139.00

3” Cut Off Discs pkt 5Discs only 0.8 mm thick. Ø75 x 0.8 x Ø9.53 mm Speed Rated to 25,000 RPM

PN: CO007K

$16.00

50 Mm (2”) Angle Grinder DiscSuits BG222RA1 Rated Speed: 23,000 RPM Size: 50 x 4 x 9.53 mm

PN: 3510232

$8.50

Air Hammer KitAir Hammer Kit includes: 5 chisels and quick change spring retainer Impact Rate: 2,900 BPM

PN: BHA67A1

$229.00

HUGE POWER!

Free Speed: 15,000 RPM Length: 188 MM Weight: 0.8 Kg

Free Speed: 21,000 RPM Length: 195 MM Weight: 0.8 Kg

Collet Size: 1/4" Free Speed: 20,000 RPM Length: 178 MM Weight: 0.75 Kg

Collet Size: 1/4" Free Speed: 20,000 RPM Weight: 0.55 Kg

Collet Size: 1/4" Free Speed: 18,000 RPM Length: 178 MM Weight: 0.80 Kg

TRADE QUALITYPneumatic Tools & Fasteners

Page 11 - Air ToolsPage 10 - Air Tools 12 MONTH FACTORY WARRANTY ON ALL BASSO TOOLS.

50 MM C1 BradderNail Shank: 1.00 MM x 1.25 MM Nail Length: 16-50 MM Capacity: 100 Nails Weight: 1.50 Kg

PN: B1850A1

$249.00Medium Duty 80 Series StaplerStaple Crown: 12.8 MM (80 Series) Staple Length: 6-16 MM Capacity: 100 Staples Weight: 0.90 Kg

PN: BN8016E

$169.00Standard 97 Series StaplerStaple Crown: 4.5 MM (97 Series) Staple Length: 10-25 MM Capacity: 142 Staples Weight: 1.2 Kg

PN: BS9725B1

$185.00

2.2 MM T-NailerNail Shank: 2.2 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg

PN: BT2264A1

$399.002.5 MM T-NailerNail Shank: 2.5 MM Fastener Length: 18-64 MM Capacity: 80 Nails Weight: 2.80 Kg

PN: BT2564A1

$399.0034° DA NailerNail Shank: 1.8 MM Fastener Length: 25-64 MM Angle: 34° Capacity: 100 Nails Weight: 1.90 Kg

PN: BA3464A1

$389.00

32 MM C1 BradderNail Shank: 1.00 x 1.25 MM Nail Length: 10-32 MM Capacity: 100 Nails Weight: 0.60 Kg

PN: B1832PA2

$159.00Light Duty Stapler 6000/L Series StaplerStaple Crown: 5.8 MM (6000/L Series) Length: 13-25 MM Capacity: 100 Staples Weight: 0.60 Kg

PN: BS9025PA2

$169.00Medium Duty 6000/L Series StaplerStaple Crown: 5.8 MM (6000/L Series) Staple Length: 13-40 MM Capacity: 100 Staples Weight: 1.18 Kg

PN: BS9040LA1

$259.00

Heavy Duty C-Brad StaplerNail Shank: 1.4 MM x 1.6 MM Fastener Length: 19-50 MM Capacity: 100 Weight: 2.00 Kg

PN: B1650B1

$339.00 Medium Duty C-Brad NailerNail Shank: 1.4-1.6 MM Fastener Length: 19-50 MM Capacity: 100 Nails Weight : 1.50 Kg

PN: B1650LA1

$259.00

SANDERS

NAIL & STAPLER GUNS

NAIL GUN OILBasso Nail Gun Oil 250 ML

Basso Nail Gun Oil 1 Liter

PN: BO250

$9.50

PN: BO1000

$17

6” Random Orbital SanderDisc Size: 6" Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg

PN: BOS156A1

$229.00

6” Random Orbital Self Generating Dust Free SanderDisc Size: 6"Orbit Diameter: 5 MM Free Speed: 12,000 RPM Spindle Size: 5/16 x 24 UNF Weight: 0.99 Kg

PN: BOS156SA1

$249.00

8” Geared Central Vac Sander (non self generating) Free Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.05 Kg

PN: BOS258GRC-D1

$439.00

8” Geared SanderFree Speed: 900 RPM Orbit: 4.76 MM (3/16”) Pad Size: 8” Velcro 5 hole bolt on Height: 142 MM Weight: 2.00 Kg

PN: BOS258GR-D1

$429.00

Heavy Duty StaplerStaple Crown: 5.8 MM (6000/L Series) Staple Length: 13 MM - 40 MM Capacity: 160 Staples Weight: 1.70 Kg

PN: B9040A1

$359.00

AIR TOOLS 12 Months Factory Warranty

Page 12 - Air Tools

Air Hammer KitKit includes 5 Chisels, Oiler, Spring Retainer and Case.

Shank Size: 10.2 MM (round) Stroke Length: 19.05 MM Free Speed: 3,000 BPM Weight: 1.70 Kg PN: GP102KD

$98.00

NEEDLE SCALERS

Needle Scaler AttachmentFits most Air Hammers

PN: GP60012

$79.00

Straight Needle ScalerFree Speed: 4000 BPM

PN: GP201

$289.00

SURFACE PREP TOOL & ACCESSORIES5” Disc Sanderc/w 3”, 4” & 5” Discs. 50 MM Surface Pads and Adapter Free Speed: 16,000 RPM

PN: GP1204R

$118.00

50 mm Backing PadAttach abrasive pads to tool. Includes 1/4” shank adapter.

75 mm Backing PadAttach abrasive pads to tool. Includes 1/4” shank adapter.

PN: GPA1523K

$15.00PN: GPA1524K

$19.00

50 mm Abrasive PadsBlue 50 mm Fine Abrasive Pad Packet of 10 PN: GPA1527X10

Maroon 50 mm Medium Abrasive Pad Packet of 10 PN: GPA1528X10

Brown 50 mm Coarse Abrasive Pad Packet of 10 PN: GPA1526X10

75 mm Abrasive Pads Brown 75 mm Coarse Abrasive Pad Packet of 10 PN: GPA1529X10

Blue 75 mm Fine Abrasive Pad Packet of 10 PN: GPA1530X10

$28.00 EA

$49.00 EA

SANDERS

Air Needle Scaler & Flux Chipper Kit

• Combo Tool Kit includes blow mold case, 1 x Moil Point, 1 x 20 MM Flat Chisel 1 x 35 MM Bent Chisel, 1 x Needle Attachment.

PN: GP268K

$379.00

8 Piece Flap Wheel KitKit includes: 25 mm x 12 mm, 120 Grit, x 1 25 mm x 25 mm, 40 Grit, x 1 25 mm x 25 mm, 80 Grit, x 1 40 mm x 25 mm, 60 Grit, x 1 40 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 80 Grit, x 1 50 mm x 25 mm, 60 Grit, x 2

PN: GFWK

$49.00

6” Random Orbital Sander

Straight Line SanderTakes 70 x 445 MM clip on paper. Suits flat automotive panel work. Pad Size: 397 x 68 MM Free Speed: 2,500 RPM Weight: 2.5 Kg

PN: GP1203

$179.00

Pad Size: 6” (velcro) Orbit Diameter: 7 MM Free Speed: 9,000 RPM Weight: 2.0 Kg

PN: GP1205

$129.00

50 mm Q/Change Felt Polishing Pad

75 mm Q/Change Felt Polishing Pad

PN: GPA1525

$8.00PN: GPA1575

$12.00

Taper Spindle1/4” Round Shank

Calico Polish MopSuits TS12 Taper Spindle 50 MM Diameter

PN: TS12

$39.00PN: PMC50

$28.00

Spring Retainer For Air HammersHeavy Duty Quick Change

PN: GPA2311

$45.00

Air Caulking Gun

PN: GPA1352A-3

$74.00

Takes 300 G Cartridges Recommended air pressure 15-40 PSI

SANDBLASTERIdeal for spot and rust removal9 Oz capacity

PN: GPASB100

$55.00


Page 13 - Air Tools

7” SANDERS & POLISHERS

7” Disc SanderSpindle: Male 5/8-11UNCFree Speed: 4,500 RPM

Weight: 2.6 Kg

Avg Air Cons.: 12 cfm

7” Angle PolisherSpindle: Male 5/8-11UNCFree Speed: 2,500 RPM

Weight: 2.6 Kg

Avg Air Cons.: 12 cfm

PN: GP1206A

$255.00PN: GP1206P

$255.00

BELT SANDERS10 mm Belt SanderBelt Size: 10 x 330 MM

PN: GP1264A

$219.00

SANDING ACCESSORIES6”(150 mm) Velcro Pad 5/16” External Thread

6” (150 mm) Velcro Dust Free Pad 5/16” External Thread • Dust Free

PN: F6505

$32.00PN: F6565

$35.00

150 mm Velcro PadM14 x 2 Int. Thread

100 mm Nylon PadM10 x 1.5 Int. Thread Includes Lock Nut

125 mm Nylon PadM14 x 2 Int. Thread Includes Lock Nut

178 mm Nylon PadM14 x 2 Int. Thread Includes Lock Nut

5” Rubber Turbo Backing Pad5/8 x 11” Internal Thread.

PN: GTP162258

M14 int thread

PN: GTP162214

7” Rubber Turbo Backing Pad5/8 x 11” Internal Thread. PN: GTP1736

M14 int thread PN: GTP1737

PN: FP36155

$49.00

PN: FP20020

$19.00

PN: FP20210

$21.00

PN: FP20410

$39.00

$25.00 EA

$49.00 EA

100% Merino sheep skin wool pile with tie cord.

Max. speed: 2,500 RPm Thickness: 32 mm

5" (125 mm) Merino Wool Sheep Skin Polishing Bonnet.

7" (180 mm) Merino Wool Sheep Skin Polishing Bonnet.

PN: FP40005

$26.00PN: FP40015

$32.00

Versatile support handle can be set to any position within it’s 180 ° range.

Kit includes: Spare disc hub, five 105 mm (4 inch) stripping wheels & carry case.

PN: GP2001A

$559.00

Grinding Wheels to suit GP2001A

Air Rust & Paint Removal Tool Kit (Non-vacuum)

$45.00 EA

Hooked Wire Disc 0.5 mm gauge PN: GPA2001A-1

H-Duty Hooked Straight Wire Wheel 0.7 mm gauge PN: GPA2001A-3

Wire Disc 0.55 mm gauge PN: GPA2001A-2

Stripping Disc PN: GPA2001A-5

Rubber Disc PN: GPA2001A-4

40 Grit 10 MM x 330 MM Pack of 10 PN: SIP10MMXP40





$25.00 Pkt

10 mm BELTS

20 mm BELTS 40 Grit 20 MM x 520 MM Pack of 10 PN: SIP20MMXP40





$38.00 Pkt

20 mm Belt SanderBelt Size: 20 x 520 MM

PN: GP1265A

$319.00


Page 14 - Air Tools

AIR ENGRAVERAir Engraving StylusIncludes medium stylus

PN: GP110

$229.00

Fine Point Stylus to suit GP110

Medium Point Stylus to suit GP110

Wide Point Stylus to suit GP110 67.85 EA

PN: GP110-16

PN: GP110-17

PN: GP110-18

DRILLS3/8” Reversible Keyed Drill

Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg

3/8” Reversible Keyless Drill

Free Speed: 1,800 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.36 Kg

1/2” Reversible Keyed Drill

Free Speed: 800 RPM Chuck Size: 1/2” (12.7 mm) Drilling Capacity: 13 mm (1/2”) Spindle Size: 3/8 x 24 UNF Weight: 1.76 Kg

3/8” Angle Reversible Drill

Free Speed: 1500 RPM Chuck Size: 3/8” (10 mm) Drilling Capacity: 10 mm (3/8”) Spindle Size: 3/8 x 24 UNF Weight: 1.02 Kg

PN: GP41013

$135.00

PN: GP4201F1

$135.00

PN: GP4204

$189.00

PN: GP4209

$225.00

METAL CUTTING TOOLS

Air Nibbler (push type)

Air Body Saw

9.5 MM Stroke Length Cuts 1.6 MM mild steel

PN: GP9301

$185.00

Metal Shear Pistol GripFree Speed: 2500 SPM

Cuts 1.6 MM Mild Steel

PN: GP8201

$169.00

Punch and Flange ToolPunches 5 MM diameter hole

PN: GP9201

$185.00Cuts 1.2-1.6 MM mild steel

PN: GP9101

$159.00

1/4” Medium Die Grinder

Collet Size: 1/4” Free Speed: 22,000 RPM Weight: 0.675 Kg

1/4” Compact Die Grinder Kit Free Speed 22,000 RPM c/w Stones in polymer Case

PN: GP2202

$69.00

PN: GP2201K

$69.00

GRINDERS

3” Cut Off Grinder

Free Speed: 22,000 RPM Weight: 0.75 Kg

PN: GP3201

$98.00

1/4” Right Angle Die Grinder

Collet Size: 1/4” Free Speed: 18,000 RPM Weight: 0.833 Kg

1/8” Micro Die Grinder Kit

Free Speed: 55,000 RPM c/w Stones in polymer Case

PN: GP2203R

$138.00

PN: GP2204K

$169.00

Quality Bi-metal Metal Blades

18 TPI of 5 Pack

24 TPI of 5 Pack

32 TPI of 5 Pack

$25.00 Pkt

PT301A18

PT301A24

PT301A32

3”Inline Cut-off Grinder

PN: GP3203

$169.00

Includes one cut-off disc. Free Speed: 18,000 RPM Length: 225 MM


Page 15 - Air Tools

HYDRAULIC RIVETERS3/16” Air / Hydraulic Riveter Gun Kit PN: GP1121D

$229.00

Heavy Duty Air/Hydraulic Riveter

Sizes: 9/32”, 1/4”, 3/16” & 5/32”

PN: GP6304

$599.00

GREASE GUN

Air and manual grease gun

Takes standard 500 CC cannisters

PN: GP1081D

$115.00

VACUUM GUN KITWonder Gun Kit

c/w Bag, Hose and Extra Nozzles. Blows and Sucks

PN: GPA0206KB

$69.00

3/8” Ratchet Wrench Heavy Duty Max Torque: 75 Ft/lbs

1/2” Ratchet Wrench Heavy DutyMax Torque: 75 Ft/lbs

PN: GP5203

$138.00PN: GP5204

$138.00

1/2” Impact Wrench Kit Max Torque: 260 Ft/lbs Includes 5-1/4 Inch Extension, Tool Oiler, 9, 10, 11, 13, 14, 17, 19, 22, 24, 27 MM sockets.

PN: GP504K

$139.00

WRENCHES

ANGLE GRINDERS4” Compact Angle Grinder Disc Size: 4” (100 MM) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.6 Kg

4” Heavy Duty Disc Size: 4” (100 MM) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.95 Kg

5” Heavy Duty Disc Size: 5” (125 MM) Spindle Size: M10 x 1.5 Free Speed: 11,000 RPM Weight: 1.82 Kg

PN: GP8101

$149.00

PN: GP8102

$229.00

PN: GP31003

$259.00

1/2” Impact WrenchMax Torque: 500 Ft/lbs Nett Weight: 2.0 Kg

3/4” Impact WrenchMax Torque: 1100 Ft/lbs Nett Weight: 3.48 Kg

PN: GP260T

$279.00PN: GP3125

$499.00

Compact Tyre Gauge• All metal Construction

Range: 0-160 PSI. Metering: Analog Units: PSI, KPA Inlet: 1/4 Male Output: Schrader valve

PN: GPATPG

$30.00

TYRE INFLATORS

Tyre Chuck with Flexible Hose

PN: GPATC2

$14.00

Deluxe Tyre InflaterMeasuring range: 0-160 PSI Units: PSI, KPA Output: Schrader valve

PN: GPA6200

$129.00

Digital Tyre Inflater

PN: GP1558-4

$199.00

Straight Dual Access Tyre Chuck• Internal serration

to grip tread

PN: GPA1570

$23.00

Dual Straight Tyre Water Chuck• Standard 15 MM garden hose fitting• Features internal serrations

to grip valve thread• Perfect for water inflation

of tractor tyres

PN: GPA1570W

$28.00NEW!

Page 16 - Air Tools

12 Months Factory Warranty

Air Chipping Hammer

®

1” HD Impact Wrench

Needle Scaler

Impact Wrenches

AIR TOOLS

Heavy Duty Chipping Hammer with Side Exhaust Stroke: 102 MM Blows/Min: 1500 BPM Length: 350 MM Weight: 9 Kg

PN: KP4735S3H

$699.00

CHISELS

25 MM Flat Chisel to suit KP4735SH for scraping, peeling spot welds etc. Shank Diameter: 14.5 MM AF Hex Length: 260 MM

25 MM Moil Point Chisel to suit KP4735SH for breaking up concrete. Shank Diameter: 14.5 MM AF Hex Length: 260 MM

PN: KPAC10021AH

$55.00

PN: KPAC10022AH

$55.00

Grease GunManual Grease Gun Capacity: 80 CC

PN: KPAC050

$29.00

HEAVY DUTY NEEDLE SCALERBlows / Min: 3,700 BPM Overall Length: 350 mm 19 Needles Ø3 x 180 mm

PN: KP4722P

$325.00

Heavy Duty Air Caulking Gun

PN: KP4613

$219.00

Takes standard 400, 500, 600, 800 ml (50 MM) sachets. Recommended air pressure: 45-90 PSI Length: 550 MM Weight: 0.9 Kg

1/2” Compact Impact WrenchFree Speed: 10,000 RPM Max Torque: 200 Ft/lbs Nett Weight: 1.35 Kg

Super Compact 1/2” Impact Wrench Length: 120 mm Free Speed: 10,000 RPm Max Torque: 450 ft/lbs Nett Weight: 1.55 Kg

1/2” Impact WrenchImpact Wrench Free Speed: 6,800 RPM Max Torque: 500 Ft/lbs Nett Weight: 2.80 Kg

1/2” Super Duty Angle Impact

Jumbo Single Hammer Free Speed: 8,000 RPm Max Torque: 200 ft/lbs Nett Weight: 1.90 Kg Overall Length: 342 mm

3/4” Heavy Duty Impact WrenchFree Speed: 5,500 RPm Max Torque: 1100 ft/lbs Nett Weight: 5.6 Kg

3/4” Heavy Duty Impact Wrench

Free Speed: 6,500 RPM Max Torque: 750 Ft/lbs Nett Weight: 4.55 Kg

1” Super Duty Impact WrenchFree Speed: 5,000 RPm Max. Torque: 1,800 Ft/Ibs Weight: 7.10 Kg

1” Super Duty Impact Wrench

1” Sq Drive SUPER DUTY Twin Hammer - High Torque Max Torque: 1400 Ft/lbs Length: 315 mm Nett Weight: 6.0 Kg

PN: KP1012J

$199.00

PN: KP1469

$296.00

PN: KP1018

$299.00

PN: KP1475

$389.00

PN: KP1030

$799.00

PN: KP1023

$550.00

PN: KP1838A-P

$1,100.00

PN: KP1835

$1,050.00

6” Extended

Anvils Available.

6” Extended

Anvils Available.

Free Speed: 3,000 RPM Max Torque: 2500 Ft/lbs Nett Weight: 15.8kg

PN: KP1045K

$1,849.00

Purchase a 1” Heavy Duty Impact Wrench and receive a FREE set of 1” Metric or Imperial Sockets Valued at $339!

FREE SOCKET SET!

Valued at $339!

RUNOUT PRICE!

Heavy Duty Air Hydraulic RiveterIncludes 5/16”, 1/4”, 7/32”, 3/16” anvils & tie Rods.

Pulling Power: 1723 Kg Stroke: 22.5 MM Air Inlet: 1/4” Weight: 1.88 Kg

PN: KP4210VK

$655.00

Air Hydraulic Nutsert GunPulls up to M12 in stainless Rivet Cap: M3, 4, 5, 6, 8, 10, 12 Pulling Power: 4800 lbs Length: 278 MM Nett Weight: 1.8 Kg

PN: KP4251MK

$1,799.00

NEW!

See page 19 for metric and imperial socket sets.

Page 17 - Air Tools

Double Ended Punches

Prick punch PN: ST32R00-1

For slight accurate spot mark for layout and measuring. Centre Punch for deep indentation in most materials.

1/32” & 2/32 Combo Punch PN: ST32R12-1

For countersinking or setting finish nails.

2/32” Nail Starter and Nail Set Combo. PN: ST32R42-1

Designed to start & guide nails or wire brads into any surface. Ideal for tight spaces where a hammer wouldn’t fit

Single Ended Punches

High Speed Steel Centre Punch PN: ST28R45-1

Designed to mark Ultra Hard materials. The tip can be sharpened without losing its RC65 Hardness.

5/16” Self Centering Centre Punch PN: ST38R04-1

Creates perfectly centered holes in brackets, hinges and other beveled surfaces.

Two Speed Drill3/8” Super Duty Two Speed DrillFree Speed: 2,800 RPM Nett Weight: 0.84 Kg

PN: KP5302

$169.00

® AIR TOOLS 12 Months Factory Warranty

1/4” Through Ratchet Kit

PN: KP2219

$259.00

Complete with 10 Sockets, 3/8” square adapter & blow mound case.

Max Torque: 30 ft/lb Nett Weight: 0.6 Kg

Dual Action Mini Sander3” Pistol Grip Mini Sander 2 Speed c/w Velcro Pad Weight: 0.50 Kg

Two Speed Air Sander c/w 50 MM & 75 MM Backing Pad Free Speed: 15,000 RPM Weight: 0.45 Kg

PN: KP6628

$189.00 PN: KP6712

$148.00

Disc Sanders

Grinders1/4” Mini Die Grinder Free Speed: 30,000 RPM Nett Weight: 0.52 Kg

2 1/2” Super Duty Grinder Free Speed: 14,000 RPM Nett Weight: 1.40 Kg

PN: KP6226

$169.00

PN: KP6970SL

$392.00

SPRING 5 PIECE AUTOMOTIVE SET5 Assorted Punches and Chisel for automotive applications

Includes: HSS Centre Punch, Prick and Centre Punch,Self Centering Centre Punch, Cold Chisel Ping Dent Hammer & Carry Case

SPRING 4 PIECE MEDIUM PUNCH SET4 Medium Pin Punches for removing drift pins, roll pins, clevis pins, spring pins, dowel pins and more. Includes carry case.

Punch Sizes: Tip Dia.: 1/16”, 3/32”, 1/8” & 5/32” Tip Length: 1 3/8”

PN: ST50X08

$89.00

PN: STPPM503

$78.00

Ideal for easy centre punching steel, counter sinking nails or for removing drift pins, roll pins and more. This professional range of spring tools generate 3500 lbs of striking impact and are about the size of a ballpoint pen. MADE IN THE

MADE IN THE U.S.A.

$24.00 EA

$24.00 EA

2 PIECE PAINT PRO SET2 Piece Paint Pro Set painters kit for precise countersinking of nails. Also includes door pin removal tool (also knocks door pins back in).

Includes: • Hammerless Combination 1/32” and 2/32” Nail Set • Hammerless door pin removal tool

PN: STPM407

$29.00

Rubber Grips to suit spring tools (Spring Tool not included)

PN: STGRIPS

$2.00 EA

Sizes: Metric 8, 10, 12, 13, and 14 MM Imperial 5/16, 3/8, 7/16, 9/16 & 1/2”

1” Super Duty Impact WrenchFree Speed: 5,000 RPm Max. Torque: 1,800 Ft/Ibs Weight: 7.10 Kg

1” Super Duty Impact Wrench

1” Sq Drive SUPER DUTY Twin Hammer - High Torque Max Torque: 1400 Ft/lbs Length: 315 mm Nett Weight: 6.0 Kg

PN: KP1838A-P

$1,100.00

PN: KP1835

$1,050.00

CLEAN UP TOOLS

Page 18 - Clean Up Tools

Air Engine Cleaner(Kero Gun)

PN: GPA034

$69.00

Engine CleanerSuction Type c/w Hose

PN: GPA1565

$39.00

Magnetic Round Tray150 MM Diameter Rubber Backed to prevent scratching. A great way to keep small parts together while working.

PN: MRT001

$16.00

MAGNETIC BROOMMagnetic Broom. Great for picking up small metal objects from the workshop floor. The broom also has a quick slide release on the telescopic handle.

Lifts up to 9 Kg (20 lbs) Width: 377 MM

PN: MB001

$119.00

PICK UP WANDTelescopic Magnetic Pick Up Wand Length: 168 MM to 900 MM Capacity: 4.50 Kg PN: MTP001

$14.00

CLEAN UP WANDMagnetic Clean up Wand Lifting Capacity: 6.30 Kg Length 400 MM Weight 0.470 Kg

PN: MW001

$75.00

HAAGA 400 Series SweepersTwice the sweeping capability in one pass

The Haaga 477 & 497 models have an additional fine particle roller brush that is mounted behind the circular brushes.

Very low dust through intelligent air flowBoth machines are also equipped with two special fine particle filters. The dusty air is cleaned by these filters and returned to the sweeping circuit.

HAAGA 200 Series SweepersOne of a kind brush system

Unlike other sweeping brush devices the Haaga 225 sweeper relies on it’s patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. Coarse or fine debris are not run over or pushed around in front of the sweeper.

400 Series Commercial Sweeper Cleaning Width: 770 MM Performance: 2,900 M2/h Capacity: 50 Liters Weight: 13 Kg (empty)

PN: HG477

$899.00

200 Series Commercial Sweeper Cleaning Width: 550 MM Performance: 1600 M2/h Capacity: 25 Liters Weight: 6 Kg (empty)

PN: HG255

$449.00

Effortlessly sweep up fine and coarse dirt, from sand to cans, wet leaves, be it dry or wet.

The disc brushes, which protrude on both sides ensure even greater sweeping performance

Easy operation & long service, life thanks to it’s belt-less drive system.

Additional guide rollers for easy sweeping along curbs and walls.

The infinitely variable height adjustment ensures optimal performance on various types of surfaces.

Space-saving storage, store vertically without losing any of the collected material.

Features an automatic height adjustment 400 Series Commercial Sweeper Cleaning Width: 970 MM Performance: 3,600 M2/h Capacity: 50 Liters Weight: 15 Kg (empty)

PN: HG497

$1090.00

Ideal cleaning solution for workshops, warehouses, factories and parking areas.

A one of a kind brush systemUnlike other sweeping brush devices, Haaga sweepers rely on there patented disk brush technology. These two specially made circular brushes cut under the waste material and whisk it directly into the waste container. The coarse or fine debris is not run over or pushed around in front of the sweeper.

1 YEARC O M M E R C I A LW A R R A N T Y

2 YEARD O M E S T I CW A R R A N T Y

AIR ACCESSORIES


IMPACT UNIV. JOINTS3/8” Drive Universal Joint Overall Length 50 mm

1/2” Drive Universal Joint Overall Length 63 mm

3/4” Drive Universal Joint Overall Length 90 mm

PN: GX38U

$19.00

PN: GX12U

$22.00

PN: GX34U

$39.00

5 PIECE ADAPTER SETS

5 Piece Std Adapter Set Chrome Vanadium

1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male

5 Piece IMPACT Adapter Set Chrome Molybdenum

1/4” Female to 3/8” Male 1/2” Female to 3/8” Male 3/8” Female to 1/4” Male 1/2” Female to 3/4” Male 3/8” Female to 1/2” Male

PN: GX5AS

$23.00PN: GXIA5

$35.00

WOBBLE IMPACTING BAR SETS1/4” Wobble Extension Bar Set 4 Piece Includes: 3”, 6”, 10” & 12” bars

3/8” Wobble Extension Bar Set 4 Piece Includes: 3”, 6”, 10” & 18” bars

1/2” Wobble Extension Bar Set 4 Piece Includes: 3”, 5”, 10” & 18” bars

PN: GXWEBS14

$43.00

PN: GXWEBS38

$49.00

PN: GXWEBS12

$59.00

Made from Chrome Molybdenum Steel CR-MO.

3/8” DRIVE

3/8” 8 Piece Metric Socket Set Sizes: 8, 10, 11, 12, 13, 15, 17, 19 mm

3/8” 8 Piece Imperial Socket Set Sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

1/2” DRIVE

1/2” 13 Piece Metric Socket Set Sizes: 10, 12, 13, 14, 15, 17, 18, 19, 21, 22, 24, 27 and 30 mm

1/2” 13 Piece Imperial Socket Set Sizes 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,15/16, 1, 1-1/16, 1-1/8, 1-1/4”

3/4” DRIVE

3/4” 8 Piece Metric Socket Set Sizes: 26, 27, 29, 30, 32, 35, 36 and 38 MM

3/4” 8 Piece Imperial Socket Set Sizes 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 and 1-1/2”

PN: GX838SSM

$59.00

PN: GX838SSI

$59.00

PN: GX1312SSM

$129.00

PN: GX1312SSI

$129.00

PN: GX834SSM

$159.00

PN: GX834SSI

$159.00

1” DRIVE

1” 9 Piece Metric Socket Set Sizes 24, 27 ,30, 32, 33, 36, 38, 41 and 46 mm

1” 9 Piece Imperial Socket Set Sizes 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8 and 2”

PN: GX91SSM

$339.00

PN: GX91SSI

$339.00

SOCKET SETS

1/2” DRIVE HEX BIT SET

Made from SNCM 8660 Steel which allows 20% more torque than CR-MO.

1/2” 8 Piece Imperial Hex Bit Socket Length 60 mm Sizes: H5, H6, H8, H10, H12, H14, H17, H19 mm

1/2” 8 Piece Imperial Hex Bit Socket Length 78 mm Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”

PN: GX12HBSM

$69.00

PN: GX12HBSI

$69.00

SPIN EXTENSIONSThe ergonomic roller-bearing grab handle protects your hand from friction burns, burs and”glove grab”. It’s use also helps to balance heavy impact tools. The aluminum alloy handle is permanently mounted on the CrMo extension.

1/2” Spin Extension Length 8”

3/4” Spin Extension Length 10”

PN: GX12SE

$39.00

PN: GX34SE

$69.00

Made from Chrome Molybdenum Steel CR-MO.

Molybdenum Steel CR-MO.

Meet or exceed DIN & ANSI standards.

AIR ACCESSORIES


IN-LINE REGULATORS1/4” Male to 1/4” Female

1/4” NPT Male to 1/4” NPT Female

1/4” External Thread.

Japanese Compatible Coupling

1/4” Internal Thread

Japanese Compatible Coupling

PN: GPA1010

$14.00

PN: GPA1011

$14.00

PN: GPA1012

$14.00

Swivel Connector

1/4” NPT Male to 1/4” NPT Female

PN: GPA9100A

$22.00

INLINE WATER SEPARATOR1/4” Inline Water Separator is an ideal solution for maintaining quality control when painting 2-Pack or oil based paints.

PN: GPA1512

$24.00

IN-LINE REGULATORS

FILTER REGULATOR & LUBRICATOR

DESCRIPTION PART NUMBER PRICE

1/4” mini control unit THBC202 $59.00

1/4” control unit THBFLR802 $85.00



FILTER REGULATOR

DESCRIPTION PART NUMBER PRICE

1/4” mini filter reg THBFR212 $59.00

1/4” filter regulator THBFR802 $55.00



1/4” Regulatorc/w gauge (No Filter)

PN: THBR202

$39.00

Spare parts are available for all Geiger filter regulators.

FILTER REGULATORS

3/4” Filter RegulatorIntegrated Auto Drain

1” Filter RegulatorIntegrated Auto Drain

PN: THBFR926A

$229.00

PN: THBFR928A

$229.00

Premium Compressor Oil 1 LitreProtect your compressor and extend service life with Geiger Premium Compressor Oil.

PN: COMPOIL1

$19.00

3/8” Air Hose Reel• Brass swivel points• Polyurethane braided hose• Sheet metal housing• Wall MountableHose Size: 12 Metre x 11 mm ID

PN: GPHR1012

$269.00

Manual Hose Reel• High quality Polyurethane braided hose• Space Saving Foldable Handle• 360 degree swivel baseIncludes wall hanging bracket.Hose Size: 20 Metre x 11 mm ID

PN: GPHR1220

$269.00

ROTARY COUPLINGS1/4” Male Rotary CouplingRange: 22 °

3/8” Male Rotary CouplingRange: 22 °

PN: B05

PN: B07 $14.00 EA

1/2” Filter(No Regulator or Gauge)

PN: THBF804

$45.00

AIR ACCESSORIES


MANIFOLDS

2 Way Cluster Quick Coupler

3 Way Cluster Quick Coupler

PN: GPA1513

$24.00PN: GPA1514

$28.00

4 Way Inline Manifold Bare

3 Way Inline Manifold Bare

2 Way In-line Manifold Bare

PN: GPATA4

$13.00

PN: GPATA3

$12.00

PN: GPATA2

$11.00

2 Way Cluster Manifold Bare

3 Way Cluster Manifold Bare

PN: GPAYA2

$11.00PN: GPAYA3

$12.00

2 Way In-line Quick Coupler



PN: GPA1515

$24.00PN: GPA1516

$28.00PN: GPA1517

$32.00

AIR BLOW GUN & DUSTERS

Air blower gunFeatures integrated 2 metre air hose.

PN: GPB90K

$49.00

Pocket Blow GunRoll Throttle (on - off) Nitto Compatible Length: 114 mm

PN: PBG-N

$13.00

3/8” High Flow Blow Gun Kit (All Metal)Japanese compatible fitting.

Kit includes:

• High Flow Duster• Easily Adjustable High

Flow Nozzle.• Heavy Duty High

Flow Nozzle• Standard Nozzle.

PN: GHF60AS

$46.00

10 mm FITTED AIR HOSE AIR HOSE CONNECTION KIT

10 mm One Touch Coupling Fittings for Air HoseIncludes 2 x hose clamps

12 mm One Touch Coupling Fittings for Air HoseIncludes 2 x hose clamps

PN: AHPACK

$22.00PN: AHPACK12

$27.00

10 mm RECOIL HOSE 2 Metre Recoil Hose

5 Metre Recoil Hose

6 Metre Recoil Hose

8 Metre Recoil Hose

PN: GPH1003LBHL

$45.00

PN: GPH1006LBHL

$49.00

PN: GPH1008LBHL

$55.00

PN: GPH1010LBHL

$59.00

5 Metre Recoil Hose

6 Metre Recoil Hose

8 Metre Recoil Hose

10 Metre Recoil Hose

PN: GPH1206LBHL

$55.00

PN: GPH1208LBHL

$59.00

PN: GPH1210LBHL

$69.00

PN: GPH1212LBHL

$79.00

12 mm RECOIL HOSE

6.5 mm ID/10 mm OD c/w Japanese compatible One Touch couplings.

8 mm ID/12 mm OD c/w Japanese compatible One Touch couplings.

20 Metre Fitted Air HoseAir Hose Size: 10 mm ID c/w Japanese compatible One Touch couplings.


PN: AH1020F

$49.00PN: AH1030F

$69.00

12 mm FITTED AIR HOSE



PN: AH1220F

$79.00PN: AH1230F

$105.00

For over 50 years Morrisflex has provided optimum solutions for aerospace, automotive, shipbuilding, metal fabrication & welding sectors worldwide. Morrisflex has been committed to providing our customers with high performance products that maximise productivity and reduce costs. Morris Flex is accredited to ISO9001: 2008 and is equipped with the latest CNC technology delivering product of unrivaled quality and consistency.

Standard & Special Carbide Burrs

Made in Europe.

Oval ShapeHead S ize

Head Dia

Head Length

Overal l Length PN Price

1 1/4” 3/8” 2” CBSE1 $30.00

3 3/8” 5/8” 2 3/8” CBSE3 $39.00

5 1/2” 7/8” 2 5/8” CBSE5 $55.00

Ball Nosed Tree ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSF1 $30.00

3 3/8” 3/4” 2 1/2” CBSF3 $29.00

5 1/2” 1” 2 3/4” CBSF5 $55.00

Pointed Tree ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSG1 $30.00

3 3/8” 3/4” 2 1/2” CBSG3 $46.00

5 1/2” 1” 2 3/4” CBSG5 $55.00

Cylinder ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSA1 $30.00

3 3/8” 3/4” 2 1/2” CBSA3 $39.00

5 1/2” 1” 2 3/4” CBSA5 $55.00

Cylinder Shape with End CutHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSB1 $30.00

3 3/8” 3/4” 2 1/2” CBSB3 $39.00

5 1/2” 1” 2 3/4” CBSB5 $55.00

Radius Ended Cylinder ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSC1 $30.00

3 3/8” 3/4” 2 1/2” CBSC3 $39.00

5 1/2” 1” 2 3/4” CBSC5 $55.00

Ball ShapeHead S ize

Head Dia

Head Length


1 1/4” 3/16” 2” CBSD1 $30.00

3 3/8” 5/16” 2 1/8” CBSD3 $39.00

5 1/2” 7/16” 2 1/4” CBSD5 $55.00

Flame ShapeHead S ize

Head Dia

Head Length


1 1/4” 9/16” 2 3/4” CBSH1 $30.00

3 3/8” 3/4” 2 1/2” CBSH3 $49.00

5 1/2” 1 1/4” 3” CBSH5 $72.00

Ball Nosed Cone ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSL1 $30.00

3 3/8” 1 3/16” 3” CBSL3 $46.00

5 1/2” 1 1/4” 3” CBSL4 $55.00

Cone ShapeHead S ize

Head Dia

Head Length


1 1/4” 1/2” 1 7/8” CBSM1 $30.00

3 3/8” 5/8” 2 1/2” CBSM4 $55.00

5 1/2” 7/8” 2 3/4” CBSM5 $55.00

Inverted Cone ShapeHead S ize

Head Dia

Head Length


1 1/4” 5/16” 2” CBSN1 $30.00

3 3/8” 3/8” 2 1/8” CBSN3 $46.00

5 1/2” 1/2” 2 1/4” CBSN5 $55.00

60° Countersink ShapeHead S ize

Head Dia

Head Length


1 1/4” 3/16” 2” CBSJ1 $30.00

3 3/8” 5/16” 2 1/4” CBSJ3 $39.00

5 1/2” 7/16” 2 3/8” CBSJ5 $55.00

90° Countersink ShapeHead S ize

Head Dia

Head Length


1 1/4” 1/8” 2” CBSK1 $30.00

3 3/8” 3/16” 2 1/8” CBSK3 $39.00

5 1/2” 1/4” 2 1/8” CBSK5 $55.00

Standard 1/4” Shank Carbide Burrs

Standard & Non-ferrous 1/4” Shank Carbide Burrs are available in three head diameters.

Page 22 - Air Tool Accessories

Size 1

Size 3

Size 5

1/4”

3/8”

1/2”


NF Cylinder ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSA1NF $46.00

3 3/8” 3/4” 2 1/2” CBSA3NF $46.00

5 1/2” 1” 2 3/4” CBSA5NF $72.00

NF Pointed Tree ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSG1NF $46.00

3 3/8” 3/4” 2 1/2” CBSG3NF $55.00

5 1/2” 1” 2 3/4” CBSG5NF $72.00

NF Cone ShapeHead S ize

Head Dia

Head Length


3 3/8” 5/8” 2 1/2” CBSM4NF $72.00

NF Ball ShapeHead S ize

Head Dia

Head Length


1 1/4” 5/16” 2” CBSD1NF $46.00

3 3/8” 5/16” 2 1/8” CBSD3NF $75.00

5 1/2” 7/16” 2 1/4” CBSD5NF $72.00

NF Radius Ended Cylinder ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSC1NF $46.00

3 3/8” 3/4” 2 1/2” CBSC3NF $45.00

5 1/2” 1” 2 3/4” CBSC5NF $72.00

NF Ball Nosed Tree ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSF1NF $46.00

3 3/8” 3/4” 2 1/2” CBSF3NF $55.00

5 1/2” 1” 2 3/4” CBSF5NF $72.00

NF Ball Nosed Cone ShapeHead S ize

Head Dia

Head Length


1 1/4” 11/16” 2” CBSL1NF $46.00

3 3/8” 1 3/16” 2 1/2” CBSL3NF $55.00

5 1/2” 1 1/4” 2 1/2” CBSL4NF $72.00

NF Oval ShapeHead S ize

Head Dia

Head Length


1 1/4” 3/8” 2” CBSE1NF $46.00

3 3/8” 5/8” 2 3/8” CBSE3NF $55.00

5 1/2” 7/8” 2 5/8” CBSE5NF $72.00

1/4” Extended Shank Burrs

Non-ferrous 1/4” Shank Carbide Burrs

Carbide Burr Sets

Ball Nosed Tree ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6 3/4”

PN: CBSF3L6 $59.00

Pointed Tree ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6 3/4”

PN: CBSG3L6 $59.00

Ball Nosed Cone ShapeHead Dia: 3/8”Head Length: 1 1/5”Overall Length: 6”

PN: CBSL3L6 $59.00

F G L

1/8” Head Carbide Burr 10 Piece Set

Shank Dia: 1/8”


Shank Dia: 1/4”

1/4” & 3/8” Head Burr 8 Piece Set

Shank Dia: 1/4”


Shank Dia: 1/4”

3/8” Head Non-ferrous Burr 3 Piece Set

Shank Dia: 1/4”

3/8” Head Stainless Burr 3 Piece Set

Shank Dia: 1/4”

PN: CBSET10

$139.00PN: CBSET3

$110.00PN: CBSET8

$229.00PN: CBSET5

$255.00PN: CBSET3NF

$135.00PN: CBSET3INOX

$129.00

Cylinder ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6 3/4”

PN: CBSA3L6 $59.00

Cylinder Shape with End CutHead Dia: 3/8”Head Length: 3/4”Overall Length: 6”

PN: CBSB3L6 $59.00

Radius Ended Cylinder ShapeHead Dia: 3/8”Head Length: 3/4”Overall Length: 6”

PN: CBSC3L6 $59.00

Ball ShapeHead Dia: 3/8”Head Length: 1/3”Overall Length: 6”

PN: CBSD3L6 $59.00

Oval ShapeHead Dia: 3/8”Head Length: 5/8”Overall Length: 6 5/8”

PN: CBSE3L6 $59.00

A B C D E

F

G

LE

B

C

D

A

NEW!


HB Small Short Bin105W mm x 137D mm x 76H mm

PN: HB210B PN: HB210R

HB Small Bin105W mm x 187D mm x 76H mm


$3.95 EA

$4.35 EA

HB Medium Bin140W mm x 276D mm x 127H mm


HB Medium Duplex BinC/W C’Board 279W mm x 276D mm x 127H mm


$9.00 ea

$13.00 ea

HB Large Short Bin210W mm x 273D mm x 178H mm


HB Large Duplex BinC/W C’Board 420W mm x 375D mm x 178H mm


$14.00 ea

$23.00 ea

New HB Series Heavy Duty Storage Bins are a versatile solution that adapts to your changing storage requirements. HB bins can be used as free standing bench storage, wall mounted storage units or on a mobile storage cart. The new design can take very high load when stacked (100 plus kilograms). Each HB bin comes with 4 Legs included.

Now you can make your HB bins mobile with this hanging display unit. With caster wheels (2 with brakes). This is an excellent time and space saver for any workshop.

Take only what you need to the job, while keep items oganised. HB Bins are easily detached from the to cart.

Model - MS20020K

MOBILE STORAGE CART

Heavy Duty Display Kit Galvanised Steel

Overall Size: 740W mm x 560D mm x 1460H mm

C/W: 72 x HB220B / HB220R 32 x HB230B / HB230R

$799.00

Hanging Panels (set of 2) C/W screws & wall plugs 605W mm x 455H mm x 8D mm

Hanging Panel Kit Set of Hanging Panels, 40 x HB210 Bins C/W Screws and wall plugs.

SERIOUS STORAGESYSTEMS

Model - HD530HD 30 Drawer Steel Parts Cabinet880W mm x 400D mm x 880H mmDrawer size: 160W mm x 110H mm x 410D mm

Model - HD318HD 18 Drawer Steel Parts Cabinet550W x 400D x 880H mm

Drawer Size: 160W mm x 110H mm x 410D mm

Model - HD515HD 15 Drawer Steel Parts Cabinet880W x 400D x 440H mmDrawer size: 160W mm x 110H mm x 410D mm

$599.00

$499.00

$455.00

HD Steel Parts CabinetsHD cabinets take up to 100 kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant. The front face of each drawer features a window which makes it easy to identify the contents.The 60 drawer NHD560 takes

up to 600 Kg total weight and up to 100 Kg per shelf. Each drawer comes with 2 movable dividers and is acid and oil resistant. The window front makes it easy to identify the contents.

410 MM

160 MM

110 MM

HD Drawer size:

Model - NHD560HD 60 Drawer Steel Parts Cabinet880W x 400D x 1725H mm

$1295.00

HD Steel Parts Cabinets

HB Series Heavy Duty Multi-Function Storage Bins

PN: HP1KITB HP1KITR

$169.00 EA

PN: HP1

$59.00

HB Mobile Storage Cart

HB Storage Bin Hanging Panels


Model - DU118MLockable Steel Door Storage Cabinet1180W mm x 400D mm x 880H mm

$599.00 Model - DU118GLockable Glass Door Display Cabinet1180W mm x 400D mm x 880H mm

$599.00

Lockable CabinetsPerfect for the showroom or where lockable storage is required.

Create more display areas in the showroom by adding a Glass Door Display Cabinet or a Steel Door Storage Cabinet.

Both cabinets feature key & combination pin lock, sliding doors for easy access in confined spaces and 2 adjustable shelves. Stack both cabinets together to raise the display cabinet to eye level.

Contents of cabinet not included.

Model - THD2SHeavy Duty Steel Lockable 3 Shelf Cabinet.880W mm x 400D mm x 880H mm

$799.00

Model - NHD53030 Drawer Parts Cabinet980W mm x 400D mm x 1010H mm(Including handle and caster wheels)

$869.00

Mobile Parts Cabinets

Model - A533636 Drawer A5 Parts Cabinet586W mm x 290D mm x 937H mm


Model - A6330H30 Drawer A6 Parts Cabinet533W mm x 265D mm x 937H mm

Model - A6212H12 Drawer A6 Parts Cabinet362W x mm 265D mm x 571H mm



$499.00

$389.00

$459.00

$279.00

$499.00

$310.00



Model - ST246060 Drawer ST2 Parts Cabinet586W mm x 222D mm x 937H mmDrawer Size:120W mm x 210D mm x 55H mm

$499.00

$349.00

$499.00

Heavy Duty Parts Cabinets

A great range of professional parts cabinets for the workshop.The all metal frame is constructed from 0.8 mm galvanized steel.The moulded drawers are acid and oil resistant. All drawers come with 1 removable divider.

A7A6A5

A8ST2

LOCKABLE DOORS

Model - A7448DA7 Lockable 48 Drawer Parts Cabinet586W mm x 270D mm x 970H mm

Model - A7324DA7 Lockable 24 Drawer Parts Cabinet444W mm x 270D mm x 677H mm

699.00

525.00

HEAVY DUTY PARTS CABINETS

Hand Tools

3 Piece T-Handle Set1/4”, 3/8” and 1/2” Drive Chrome Vanadium

PN: GXTH3

$129.00

Page 26 - Hand Tools

HAND TOOLSSCREWDRIVER SETS42 Piece Precision Screwdriver SetSet Includes: Handle (20 teeth) & Flexible Extension

10 BIT ANGLE DRIVER SET

PN: GSDS

$49.00

PN: GPA1600

$29.00

21 Piece Magnetic Drive Guide SetIncludes: Phillips head (2 x #0, 1, 2) Hex Head (2 x #3,4,5) Flat head (1 x #5, 2) and Star head (2 x #0, 1, 2)

PN: GBS21

$12.00

49 Piece Bit Set.Set includes: Flat Head, Hex Head, Phillips Head, Star Head, Small Socket Set 5 MM to 11 MM, Magnetic Drive Unit and 5 x combination bits.

PN: GBS49

$19.00

Metric 9 Piece Ball Point Hex Key Wrench SetSizes: 1.5, 2, 2.5, 3, 4, 5, 6,8 & 10 mm

Imperial (SAE) 13 Piece Ball Point Hex Key Wrench SetSizes: 0.05”,1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, & 3/8”

Tamperproof 13 Piece Star Key Wrench SetSizes: T6H, T7H, T8H, T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H

Non Tamperproof 13 Piece Star Key Wrench SetSizes: T6H, T7H, T8H,T9H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, T45H, T50H

PN: GXHK9M

$38.00

PN: GXHK13I

$38.00

PN: GXTP13

$45.00

PN: GXTX13

$45.00

4 Piece Hook &

Pick Set 61/4”Includes 1 x straight, 1 x 90°, 1 x Offset & 1 x Hook

PN: GXHP4

$29.00

14 Piece Gasket Punch SetSizes 1/4, 5/16, 3/8, 7/16 1/2, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 3/8, 1 1/2”

PN: GGPS

$65.00

Jumbo Metric 13 Piece Ball Point Hex Key Set

Set includes: 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14, 17, 19 MM Keys

Jumbo Imperial 13 Piece Ball Point Hex Key Set

Set includes: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4" Keys

$99.00 EAPN: GXHK34I

PN: GXHK19M

Made from Chrome Vanadium SteelSOCKET SETS1/4”43 Piece Chrome Vanadium Socket Set• 1/4” Drive Sockets: 4, 4.5, 5, 5.5, 6,

7, 8, 9, 10, 11, 12, 13 & 14 mm

• 1/4” Ratchet Handle 72 Gears• 1/4” Extension Bars 2” & 6”• 1/4” Spinner Handle• 1/4” Universal Joint• 3 Way Adapter• 1/4” Flexible Extension Bar• 1/4” Bit Socket (23 Pieces Torx T8,

T9, T10, T15, T20, T25, T27, T30, T40 PH 1, 2, 3 Slotted 4, 5.5, 6.5 Pozi 1, 2, 3 Hex H3, H4, H5, H6, H8

• Blow Mold Case

1/2” 56 Piece Chrome Vanadium Socket Set• 1/2” Drive Sockets sizes: 8, 10, 11,

12, 13,14, 15, 17, 18, 19, 22, 24, 27, 30, 32 mm

• 1/2” Ratchet Handle 72 Gears• 1/2” Extension Bars 5” & 10”• 1/2” Park Plug Socket 16 & 21 mm • 1/2” 3 Way Adapter• 1/2” Coupler x 10 mm Hex• 1/2” Bit Sockets 3 Piece

T50, T55, T60• 1/2” Bit Sockets: 31 Piece Torx bits:

T10, T15, T20, T25, T27, T30 PH 1, 2, 3, 4, Slotted 6.5, 8, 10, 12 Pozi 1, 2, 3, 4 Hex 4, 5, 6, 8, 10 TP T10, T15, T20, T25, T27, T30, T40, T45

• Blow Mold Case

PN: GP1599-5

$69.00 PN: GP1599-8

$119.00

Made from Chrome Vanadium Steel

Lang Tools represents hand tools that professional technicians and handymen have used for over 80 years, which assures that you are dealing with performance proven consumer preferred, professional high quality products. MADE IN THE

U.S.A.


Quick Switch Ratchet Pliers with Automatic Lock and Tip Kit. Automatic ratchet lock feature keeps rings open or closed for easy installation and removal.

Ring Size Range

Metric Imperial

Internal 46 mm – 102 mm 1-13/16˝ – 4˝

External 32 mm – 102 mm 1-1/2˝ – 4˝

Tip Sizes

Metric SAE(Inch)

Bent 15° 2.3 mm, 2.7 mm, 3.0 mm 0.090˝, 0.108˝, 0.120˝

Bent 70° 2.3 mm, 2.7 mm, 3.0 mm 0.090˝, 0.108˝, 0.120˝

2 Piece Quick Switch Pliers with Automatic Lock and Tip Kits. Contains 1ea of L1421 and L1434 models c/w 5 prs of colour coded interchangeable tips and hex key for each.

Ring Size Range

Metric Imperial

Internal7 mm – 26 mm (L1421) 10 mm – 51 mm (L1434)

1/4” – 1” 3/8” – 2”

External3 mm: 26 mm (L1421) 7 mm – 51 mm (L1434)

1/8” – 1” 1/4˝ – 2˝

Tip Sizes L1421

Metric SAE(Inch)

L1421Straight 0.6 mm, 1.0 mm, 1.2 mm 0.023˝, 0.039˝, 0.047˝

Bent 90° 1.0 mm, 1.2 mm 0.039˝, 0.047˝

L1434Straight 1.0 mm 1.2 mm, 1.9 mm 0.039˝, 0.047˝, 0.074˝

Bent 90° 1.0 mm, 1.2 mm 0.039˝, 0.047˝

PN: L75

$119.00PN: L1450

$135.00

$139.00 EA

Retaining Ring PliersSpring ratchet locking mechanism securely holds against snap ring tension

Internal Retaining Ring PliersPN: L1485

Ring Sizes: 78 mm to 159 mm (3-1/16” to 6-1/4”) Tip size: Straight 3 mm (.120”)

External Retaining Ring PliersPN: L1486

Ring Sizes: 89 mm to 165 mm (3-1/2” to 6-1/2”) Tip size: Straight 3 mm (.120”)

PN: L279

$129.00

Features:

• Four Tools in One• Works on various single,

dual & quad piston callipers• Centrally distributes

force

• Compact design• 360 degrees ratchet

swing allows access at any angle

Working range: 40 mm - 64 mm

Length: 235 mm

Brake Calliper Ratchet Press

Spare Tips to Suit Ext. & Int. Ring PliersSpare tips available to suit (L1486) External and Internal (L1485) Ring Pliers:

Straight Tips to suit L1485/6 PN: L88600

45 Degree Tips to suit L1485/6 PN: L88645

90 Degree Tips to suit L1485/6 PN: L88690

$35.00 EA

12 PIECE COMBINATION INTERNAL / EXTERNAL SNAP RING PLIERS SET Slim profile tips for tight applications.

• Pliers are convertible for use on internal and external snap rings with cushioned grip handles

• Pliers have a knurled centre screw with spring for easy changing and secure hold

• Sets are packaged in a plastic blow molded case for protection and easy use

PN: L3495

$249.00

CONVERTIBLE RETAINING RING PLIERS• Convert between internal and external with a quick

flip of a switch• Eliminates the jaw aligning push-pin process• Double-dipped custom grip made of low-temp,

high-impact material

SET OF 2 SWITCHABLE RETAINING RING PLIERS• Spring return handles• Each pliers includes a tip kit containing durable alloy,

colour-coded interchangeable tips and hex key, all stored in a handy pouch

TIP SETSStrong and durable alloy steel tips. Includes 6 pairs of colour-coded, interchangeable tips, set screws and Hex.

TIP SET to suit L1421Pliers

TIP SET to suit L1434 Pliers

TIP SET to suit L75 Pliers

PN: L12

$35.00PN: L14

$35.00PN: L651590

$39.00

THE TAIL BONE

THE BONESTER

ROUGH RIDER

creepers & stools

One YearFACTORYWARRANTY

Made in the

U.S.A.

160 KGCAPACITY

180 KGCAPACITY

180 KGCAPACITY

180 KGCAPACITY

140 KGCAPACITY

160 MM PROFILE

191 MM PROFILE

114 MM PROFILE

The Tail Bone is a totally new approach to creeper seats, easier to use, more comfortable and rolls effortlessly over air hoses, drop cords, shop clutter and rough surfaces. The uniquely designed tripod base is a naturally stable working platform even on uneven floors and surfaces. The super comfortable bucket seat is shaped and sized for real-world people.

Mechanics Stool Ribbed Body740L x 800W MM

300 MM Seat HeightLoad Capacity: 160 Kg

Huge 130 MM Easy Rider Tyres20 MM Ground ClearanceWeight: 7 Kg

Rough Rider Mechanics Stool Ribbed Body740L x 800W MM

330 MM Seat HeightLoad Capacity: 180 Kg

Huge 130 MM Ø Rough Rider Tyres44 MM Ground ClearanceWeight: 7.5 Kg

PN: BONE5031

$299.00PN: BONE5131

$369.00

Mechanics Creeper1194L x 648W x 191H MM

Wheels: Ø130 MM x 33 MM widthRough Rider Rider Tyres73 MM Ground ClearanceWeight: 9.1 Kg

PN: BONE7031

$399.00

SUPER LOW PROFILEThe deep, smoothly molded structural ribs add incredible strength and durability without adding bulk & weight; providing welcome ventilation for those hot muggy days. Two inlayed hand-holds make it easy to carry and easy to secure against theft or serial tool borrowers.


Wheels: Ø75 MM x 22 MM widthLoad Capacity: 180 Kg

Easy Rider Tyres38 MM Ground ClearanceWeight: 6 Kg

PN: BONE4031

$239.00

THE BONELOW PROFILE


Wheels: Ø130 MM x 25 MM widthLoad Capacity: 180 Kg

Wide Easy Rider Tyres45 MM Ground ClearanceWeight: 8 Kg

PN: BONE6031

$349.00

The Bone™ and Bonester™ feature a uniquely shaped body which cradles the user between the wheels only an inch or so above the ground. The big, easy rolling wheels are positioned outboard to provide a strong, stable working platform that can’t tip or fl ip the user. The large diameter wheels roll easily over all sorts of obstacles such as cords and air lines.

The Rough Rider Wheels are designed for use on grass, gravel and dirt or anywhere the going is tough

ROUGH RIDER

The Easy Rider Wheels have soft tyres that grab and roll over frustrating shop clutter.

EASY RIDER


HIGH PERFORMANCE DEBURRING TOOLS


Telescopic Multifunction Deburring ToolMulti-Component Handle (GDSTSDMK) & blade holder Standard Deburring blades: GDSC10, GDSC15, GDSC20, GDSC30, GDSC35

Deburring Tool with 3 MC 3.2 mm blade3.2 mm Standard Quick Release Handle (GDSDSDMK) with Multi‑cutting Edge Deburring blades: GDSMC10, GDSMC20, GDSMC101

6 mm Heavy Duty Quick Release Deburrer

6 mm Heavy Duty Quick Release Handle (GDSRSDMK) with 6 mm General Purpose Blade (GDSR10S).

PN: GD38325

$38.00

PN: GDSRSDMKK

$30.00

Ergonomic Deburring Tool & Blade SetPromotional Quick Release Handle Set with 10 assorted 3.2 mm blades.Set Includes: 3.2 mm Standard Quick Release Handle (GDSDSDMK) Standard 3.2 mm Deburring blades: 2 x GDSC10, 2 x GDSC101, 2 x GDSC15, 2 x GDSC20, 1 x GDSC30, 1 x GDSC35

PN: GD88040

$34.00

24 Piece Deburring SetSet of Multi-Component and Quick Release Handles including a comprehensive range of accessories.

PN: GD88030

$220.00

Set includes: 3 Multi-Component Handles (GDSTSDMK) Heavy Duty 6 mm Quick Release Handle (GDSRSDMK),Micro Deburring blades: GDSP1, GDSP2, GDSP3Standard Deburring blades: GDSC10, GDSC101, GDSC15 GDSC20, GDSC30, GDSC35Heavy Duty Deburring blades: GDSR10S, GDSR15S

Telescopic Blade Holders GDSDTP, GDSDTC, GDSVT, GDSCSLONG, GDSKWDeburring Blades & Scrapers GDSV4, GDSKW9, GDSKW16 GDSCSLONG, GDSSCR6, GDSV2, GDSC12 blade holders 2 mm Hex Key

Double DeburrerDeburrs both sides of workpiece at same time. Double Deburrer features underneath safety guard.

PN: GDDB

$19.00

PN: GD38333

$29.00

Pack of 5 Hex handle Deburring ToolsSet of 5 3/8" Hex Handle Deburring Tools A/F Hex. Aluminium body handle with replaceable GDSC10 blades.

Pack of 10 Hex Handle Pocket DeburrersSet of 10 Hex Handle Pocket Deburrers. 8 mm Hex Aluminium body handle with Pocket clip & C-10 blade. Blade cannot be replaced.

PN: GD86060

$56.00PN: GD86110

$56.00

Double Deburrer blade setPN: GN80

$11.95

Hand Tools


Bearing Separator

S45C Drop Forged hardened Bearing Separator.

Working Range: 0-370 mm Jaw Range: 75-105 mm

Gear Puller

Working Range: 0-185 mm

Set includes: Twin & Triple Leg Heads Hydraulic Ram (12 Ton capacity) Carbon Steel Beam 200 mm, 150 mm, & 100 mm arms 85 mm, 35 mm, Spacers 25 mm Centre Adapter

Multi-Hydraulic Gear Puller Kit

PN: GHPK

$499.00

Gear & Bearing Splitting Combination SetSmall Bearing Separator

Jaw Range: 30-50 mm Working Range: 0-135 mm

Large Bearing Separator

Jaw Range: 50-75 mm Working Range: 0-180 mm

Includes Centre Adapter.

S45C Drop Forged hardened Main Beam and Bearing Separators.

PN: GBTK

$189.00

Made in Japan.RIVETING TOOLS

Heavy Duty Air/Hydraulic Nutsert Tool This heavy duty tool is suitable for setting aluminium, steel and stainless steel nutserts from 4 mm to 10 mm. Manual nutsert release spindle.Includes: M4, M5, M6, M8, M10 mandrels, Weight: 1.5 kg

PN: SNAN800

$959.00

Heavy Duty Hand RiveterRiveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.

PN: SNPRO3000

$49.00

Aluminium & steel nutserts available in packs of 50.

Hand Operated Nutsert SetSet includes aluminium M4, M5, M6 & Steel M6 nutserts,M4, M5, M6 Mandrels and instructions.

Extra nutserts available in packs of 50

PN: SNSC456

$169.00Heavy Duty Long Nose 2-way Hand Riveter SN10000

$115.00

Lazy Tongs Heavy Duty Hand RiveterExtended Length: 860 mm Contracted Length: 310 mm Riveting sizes: 3.2, 4.0, 4.8 mm

SNSC50

$195.00

Long Handled Nutsert Tool• Sets nutserts into Aluminium & SteelIncludes: M4, M5, M6, M8, M10 Mandrels Weight: 1.5 kg

PN: SNHN096

$295.00

Riveting sizes: 2.4, 3.2, 4.0, 4.8 mm • Die-cast aluminium body • High carbon steel Handle • Nonslip comfortable grip.

ENGINEERING EQUIPMENT

DIVIDERS & CALIPERS8” Divider

8” Inside Caliper

8” Outside Caliper

Spring Divider 12”

Inside Caliper 12”

Outside Caliper 12”

PN: FM0218

$24.00

PN: FM0238

$24.00

PN: FM0228

$24.00

PN: FM0912

$25.00

PN: FM1012

$25.00

PN: FM1112

$25.00

HOLLOW PUNCH SET6 Piece Hollow Punch Set Set includes: 5 MM, 6 MM, 8 MM, 9 MM, 11 MM, & 13 MM. PN: YC516

$25.00

Heavy Duty Parts Trolley

1.6 mm steel uprights. Max Load: 150 Kg 410W x 760D x 885H mm

Heavy Duty 3 Shelf Parts Trolley

3 Shelves, side container and drawer 1.6 mm steel uprights 470W x 785D x 825H mm

Heavy Duty Parts Trolley

Max Load: 200 Kg 500W x 873D x 880H mm

5 PIECE PIN PUNCH SETLength: 200 MM Sizes: 3.2, 4.8, 6.4, 8, 9.5 MM

PN: GPP5

$28.00

HEAVY DUTY TROLLEYS

PN: GT3S

$239.00PN: GT3SD

$279.00PN: CTH5086

$445.00

Takes Up To

100 Kg Per Shelf!Max Load

150 Kg!

Max Load

150 Kg!

Page 31 - Engineering Equipment

SCREW PITCH GAUGES

Metric & Whitworth Pitch GaugeRange: Whitworth 60° 4-62, Metric 55° 0.25-6 52 Leaves

Unified 60° Pitch GaugeRange: Metric 60° 4-42 TPI 30 Leaves

Unified 60° Pitch GaugeRange: Metric 60° 0.25-2.5 mm 28 Leaves

PN: FT163

$48.00PN: FT006

$38.00PN: FT156

$38.00

RADIUS GAUGESRange: 0.75 to 5 mm Increments: 0.25 mm

Range: 5.5 to 13 mm Increments: 0.5 mm

PN: FT272MA

$39.00

PN: FT272MB

$49.00

Pocket Depth GaugeRange: 0-50 mm

Welding Gauge MetricRange: 0-50 mm

PN: FTPDG50

$69.00

PN: FTNWG94

$94.00

MADE IN JAPAN

FEELER GAUGES 150 mm Feeler Gauge Set20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm

200 mm Feeler Gauge Set20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm

300 mm Feeler Gauge Set20 Blades Range: 0.05 to 1 mm Increments: 0.05 mm

PN: GFG150

$22.00 PN: GFG200

$25.00PN: GFG300

$35.00



NUMBER & LETTER PUNCHESEach set packed in a ABS-red strong plastic case. Made from S 55C High carbon steel, HRC 58~60 Degrees.

Kit includes: One Piece Type Holder, hexagon wrench, Steel types* 100 piece (A-Z, 0-9 ,& ,/ ,- , blank space). The holder can accommodate 9 pieces of our 3 MM steel types.

3 mm Punch Holder Set

6 mm Punch Holder Set

PN: GYC610-3

$399.00PN: GYC610-6

$499.00

36 Piece/4 mm Letter & Number Punch SetOTHER SIZES AVAILABLE

9 Piece/6 mm Number Punch SetOTHER SIZES AVAILABLE

PN: GYC607-4

$55.00

PN: GYC602-6

$32.00

WORK LAMPS

90 LED Magnifier Work Lamp90 Super Bright LED’s (Ø290 MM Array) Glass Lens 3 x Magnification (Ø120 MM) All metal frame construction 240V mains power (2 Metre Cord) Bench mounted up to 55 MM thickness.

PN: ML90

$169.00 VICESDrill Press Vice 4” Drill Press Vice 6” Drill Press Vice

ROUND VICEMachine Vice. Holds round workpieces. Reversible mount for smaller bar diameters.

ANGLE VICES60 MM Opening Welders Angle Vice

100 MM Opening Welders Angle Vice

8 Drill Press Vice

PN: TV102-4

$38.00PN: TV102-6

$68.00

PN: GVSR

$299.00

PN: TV274

$129.00PN: TV275

$179.00

PN: TV122-8

$299.00

4” Cross Vice 6” Cross Vice

PN: TV144-4

$110.00PN: TV144-6

$195.00

Halogen Lamp Medium Arm24 Volt/70W PN: AL101B

$139.00

240V to 24V TransformerTo Suit AL Halogen Lights (Safety Approved No. N16803) PN: AL24024

$79.00

Compact Halogen Lamp Halogen Lamp no arm 24 Volt/70W

PN: AL101C

$129.00

Halogen Lamp Medium Arm24 Volt/70W

PN: AL101A

$149.00

150 mm Plate ShearCuts up to 5 MM Mild Steel

PN: PS6

$235.00


Centre Drill Set5 Piece Centre

Drill SetSizes 1 to 5

3 Piece Double Spiral Step Drill Set4-12 MM, 4-20 MM, 4-32 MM HSS Tinite Coated

PN: GCDS

$32.00PN: G3SD

$139.00


J6 MOUNT KEYLESS CHUCKSJ6 Mount Keyless 13 mm Drill Chuck.Range: 0 MM-13 MM.

J6 Mount Keyless 16 mm Drill Chuck.

Range: 3 MM-16 MM.

KEYLESS CHUCKS SPANNERSSpanner to suit a VKD102 Keyless Chuck J6 Mount.

Spanner to suit a VKD104 Keyless Chuck J6 Mount.

DRILL CHUCK ARBORDrill Chuck Arbor MT2 x J6

Drill Chuck Arbor MT3 x J6

Drill Chuck Arbor MT4 x J6

PN: VKD102

$110.00

PN: VKD104

$129.00

$16.00 EA

PN: VKD102SPANNER

PN: VKD104SPANNER

PN: DCAMT2J6

$19.00

PN: DCAMT3J6

$23.00

PN: DCAMT4J6

$32.00

KEYED CHUCKS

KEYED CHUCKS

J6 Mount Keyed 13 mm Drill ChuckCapacity: 2.5 MM-13 MM. Includes Key

J6 Mount Keyed 16 mm Drill ChuckCapacity: 2.5 MM-16 MM. Includes Key

PN: PORA13J6

$55.00

PN: PORAP16J6

$95.00

3/8” Mount LD 10 mm Keyless Drill Chuck

Capacity: 1.5-10 MM Mount: 3/8” x 24 TPI


Capacity: 1.5-10 MM Mount: 1/2” x 20 TPI

$59.00 EA

PN: PORLDP10F38R

PN: PORLDP10F12R


Capacity: 2-13 MM Mount: 3/8” x 24 TPI


Capacity: 2-13 MM Mount: 1/2” x 20 TPI

$74.75 EA

PN: PORLDP13F38R

PN: PORLDP13F12R

Made in Italy.SOLUBLE CUTTING OIL

1 Litre Soluble Cutting OilMix with water 1:10

5 Litre Soluble Cutting OilMix with water 1:10

SOLOIL1

$19.00

SOLOIL5

$69.00

STAINLESS HARDENED RULES150 mm Stainless Hardened Dual Scale Rule

300 mm Stainless Hardened Dual Scale Rule

PN: AS1015

$6.90

PN: AS1030

$13.80

HSS Cross Hole Countersink BitsMachined from High Speed Steel.

Size: 25-30 mm / 90° Shank Dia: 15 mm




PN: GCS2530

$59.00

PN: GCS3035

$65.00

PN: GCS3540

$89.00

PN: GCS4050

$199.00

5 Piece HSS Cross Hole Style Countersink SetSizes include: 2-5, 5-10, 10-15, 15-20, 20-25 mm / 90°

PN: GCS5S

$129.0

HSS Counter Sink Set

3 Flute HSS Countersinking Bit SetTinite coated 12 Piece Set Sizes include: 2-25 mm / 90°

PN: GCS3F12

$169.00

LAST CHANCE LIQUIDATION SALE! LAST CHANCE LIQUIDATION SALE!


PRICED TOMOVE!

35 mm Dial Bore GaugeRange: 18-35 mm Accuracy: ±0.01 mm




1.5” Dial Bore GaugeRange: 0.7-1.5” Accuracy: ±0.0001”

6” Dial Bore GaugeRange: 2-6” Accuracy: ±0.0001”

16” Dial Bore GaugeRange: 10-16” Accuracy: ±0.0001”

RRP $89

Now $79 LOW STOCK!

PN: DBORGA18

RRP $149

Now $79 LOW STOCK!

PN: DBORGA50

RRP $189

Now $79 LOW STOCK!

PN: DBORGA160

RRP $189

Now $99 LOW STOCK!

PN: DBORGA250450

RRP $149

Now $79 LOW STOCK!

PN: DBORGA07

RRP $189

Now $79 LOW STOCK!

PN: DBORGA26

RRP $189

Now $79 LOW STOCK!

PN: DBORGA1016

150 mm Depth VernierRange: 0-150 mm Increments: 0.02 mm



6” Depth VernierRange: 0-6” Increments: 1/1000”

8” Depth VernierRange: 0-8” Increments: 0.001”

12” Depth VernierRange: 0-12” Increments: 0.001”

RRP $39

Now $25 LOW STOCK!

PN: DEPVER150

RRP $44

Now $25 PN: DEPVER200

RRP $55

Now $29 LOW STOCK!

PN: DEPVER300

RRP $39

Now $25 LOW STOCK!

PN: DEPVER6

RRP $44

Now $25 LOW STOCK!

PN: DEPVER8

RRP $55

Now $29 LOW STOCK!

PN: DEPVER12

DEPTH VERNIERS

COMBINATION SET SQUAREIncludes Square Head, Centre Head, Ruler and Protractor Head

RRP $110

Now $79 PN: MSETCOMB

DIGITAL DUAL SCALE VERNIER

1000 mm Dual Scale Digital Vernier0-1000 mm / 0-40” Graduations 0.01 mm / 0.001”

RRP $799

Now $489 LOW STOCK!

PN: DIGVER40

PRECISION LEVELAccuracy: 250/0.2 mm per 1000 mm

RRP $149

Now $99 PN: GPL250

BORE DIAL GAUGES

VERNIER PROTRACTOR

Set includes: Protractor, Aux. Arm, 150 mm, 200 mm, 295 mm arms

Range: 0-360° Increments: 5 amin

RRP $65

Now $39 PN: UBPVER

UNIVERSAL BEVEL PROTRACTORRange: 0-320° Increments: 2 amin

RRP $119

Now $69 PN: UNIVBEV

Telescopic Gauge SetSix Piece Set Range: 8-150 mm

RRP $54

Now $35 PN: TELCHIN

Micrometer Stand with Fine adjustment• Magnetic base

with switch

• V-block base

RRP $45

Now $29 PN: MAGSTAND

LAST CHANCE LIQUIDATION SALE! LAST CHANCE LIQUIDATION SALE!


PRICED TOMOVE!

250 mm Tubular MicrometerAccuracy: ±0.01 mm Range: 50-250 mm

RRP $195

Now $110 PN: MICTUB3” Micrometer

Range: 2-3” Increments: 0.0001”

4” MicrometerRange: 3-4” Increments: 0.0001”

4-5” MicrometerRange: 4-5” Increments: 0.0001”










RRP $49

Now $35 LOW STOCK!

PN: MIC23

RRP $65

Now $39 LOW STOCK!

PN: MIC34

RRP $89

Now $55 PN: MIC45

RRP $95

Now $65 LOW STOCK!

PN: MIC56

RRP $110

Now $65 LOW STOCK!

PN: MIC67

RRP $125

Now $65 LOW STOCK!

PN: MIC78

RRP $139

Now $69 LOW STOCK!

PN: MIC89

RRP $155

Now $69 LOW STOCK!

PN: MIC910

RRP $169

Now $69 LOW STOCK!

PN: MIC1011

RRP $185

Now $69 LOW STOCK!

PN: MIC1112

RRP $339

Now $159 LOW STOCK!

PN: MIC1216

RRP $369

Now $159 LOW STOCK!

PN: MIC1620

6-12” Micrometer SetSet includes 6 Micrometers

RRP $569

Now $299 LOW STOCK!

PN: MICSET612

100 mm MicrometerRange: 75-100 mm Increments: 0.02 mm










RRP $65

Now $39 PN: MIC75100

RRP $110

Now $65 LOW STOCK!

PN: MIC150175

RRP $125

Now $65 LOW STOCK!

PN: MIC175200

RRP $139

Now $69 LOW STOCK!

PN: MIC200225

RRP $155

Now $69 LOW STOCK!

PN: MIC225250

RRP $169

Now $69 LOW STOCK!

PN: MIC250275

RRP $185

Now $69 LOW STOCK!

PN: MIC275300

RRP $369

Now $259 LOW STOCK!

PN: MIC400500

RRP $455

Now $279 LOW STOCK!

PN: MIC500600

RRP $755

Now $599 LOW STOCK!

PN: MIC700800

OUTSIDE IMPERIAL MICROMETERS

OUTSIDE MICROMETERS SETS INSIDE MICROMETERS4” Inside MicrometerRange: 3-4”

RRP $110

Now $65 LOW STOCK!

PN: MICIN34

OUTSIDE METRIC MICROMETERS

25 mm Depth MicrometerIncrements: 0.01 mm Range: 0-25 mm

RRP $98

Now $62 LOW STOCK!

PN: MICDEP025

1” Dial Indicator & Point SetsMetric Dial GaugePN: DGAI1K

Range: 0-25 mm Increments: 0.01 mm

Includes Dial Indicator, 22 Piece Contact Points Set and blow-mold case.

Imperial Dial GaugePN: DGAM25K

Range: 0-1” Increments: 0.001”

Includes Dial Indicator, 22 Piece Contact Points Set and blow-mold case.

$39.00 EA

100 mm Tubular Micrometer Extension

RRP $65

Now $35 PN: MICTUBEXT

FREE Points Set &

Blow‑Mold Case!

Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at time of printing. M. Gamer Pty. Ltd. and National Tool Distributors will do everything possible within reason to maintain stocks of products. M. Gamer Pty Ltd and National Tool Distributors reserves the right to change prices without notice. ALL PRICES QUOTED INCLUDE GST.

360° Keyless 10 mm Drill AttachmentChuck Capacity. 1.5-10 MM Angle Range: 360° / 16 increments Max. speed: 3500 RPM Max torque: 35 Nm Drive: 6 MM Hex Weight: 465 G

PN: PORRADAV360CL

$249.00• Fits all standard power tools and screwdrivers.

• Includes T handle locking wrench.

• Metal Body, Hard Nylon chuckMade in Italy.




PN: GPK3

$39.00

5 Compartment Pivot Drawer Set.Wall mountable

600W MM x 103D MM x 150H MM

PN: FO605

$34.00

MOBILE SORTING CARTSMobile Tip Out Sorting CartC/W 2 x FO308, 2 x FO306, 2 x FO605 and 2 x FO604600W MM x 1200h MM

Double Sided Mobile Tip Out Sorting Cart

C/W 4 x FO308, 4 x FO306, 4 x FO605 and 4 x FO604

600W MM x 1200h MM

PN: MSFO4568

$489.00

PN: MSFO4568X2

$644.00


300W x 86D MM x 250H MM

PN: FO306

$24.00


600W MM x 140D MM x 200H MM

PN: FO604

$42.00

PIVOT DRAWERS

NEW!

NEW!

SURFACE PREP ACCESSORIES

8 Compartment Pivot Drawer Set. Wall mountable

300W x 67D mm x 200H mm

PN: FO308

$24.00

75 mm Quick-Lock Sanding Discs

$14.00 EA

50 mm Quick-Lock Mini Flap Discs

$22.00 EA





NEW!

NEW!Pack of 5.

Pack of 5.

Valid 1st October, 2015 to 28 th February, 2016. All prices quoted include GST.

Distributed by:

Documents

Gamer Workshop Special Oct 2015 - Feb 2016