General and Heavy Duty Vacu-Break Enclosed Switch Replacement

General and Heavy Duty Vacu-Break Enclosed SwitchReplacement Parts

Ordering Information

1. Identify the Switch Catalog Number that the replacement parts are needed for.2. Select the replacement part needed (Line Base, Load Base, Neutral or Wire Grips).3. Determine the number of pieces required.4. Determine if wire grips must be ordered. (Existing wire grips on 200 Amp and larger switches

can be removed and used on the new replacement bases).

Example

Requirement:Line and Load base assemblies for a 4-pole, 200 Amp, 240 Volt, Type 1 General Duty Switch.

1. JF4242. Line - W40706 Load - W40707 (page 3) 3. Need quantity of 4 of W40706 and W40707 replacement bases4. Need 8 total of W67714 Wire Grip Kits (4 for the line side

bases and 4 for the load side bases)

Complete Order:

• 4 - W40706

• 4 - W40707

• 8 - W67714

Note: These replacement bases are only one pole. That is why 4 are required for this 4-Pole switch. If only one pole is required to be replaced youcould order one replacement base kit.

Note: All parts of the replacement bases shown in the photos are not sold separately. The completebase assembly must be purchased.

General Duty Enclosed Switch Double Break, Visible Blade Type Replacement Parts

1 Piece Line/Load Base Assembly

Represents a 30 Amp General Duty Switch (GF321N)*

Represents a 30 Amp General Duty Replacement Base Assembly (W410473A)*

Phenolic Base Assembly (1 Piece Design)

Load Side Wire Grips

Base AssemblyMounting Holes

Blade

Neutral

Line Side Contacts and Wire Grips

Load Side Contact

Fuse Clips

Rotor

2

* The 30 Amp General Duty Switches employ a visible blade, double break design.Note: All parts shown above are included with the replacement base and will not be sold separately.

3

General Duty Enclosed Switch Vacu-Break Type Replacement Parts

30/60 Amp 240V Neutral (W47444)

100 Amp 240V Neutral (W47445)

Type 1 Indoor

Type 3R Outdoor

Catalog Number

Quantity ofLine/LoadBase Ass’y

Switch Line Base Load Base Required Neutral Kits Wire GripPer Switch Kits ➄

GF221N ➅ W410472A ➁ — 1 W410190 ➀ ➂JN321 W50125 ➁ — 1 ➀ ➂JN322 W40688 W40687 1 ➀ ➂JN323 W42047 W42046 1 ➀ ➂JN324 W40704 ➃ W40712 ➃ 1 ➀ W67714JN325 W30648 ➃ W30644 ➃ 2 W60992 W67712JN326 W36954 ➃ W36953 ➃ 2 W60993 W67713

240 Volts Max Fusible - 2 Pole, 3 Wire

GF321N ➅ W410473A ➁ — 1 W410190 ➀ ➂JN421 W40681➁ — 1 — ➂JN422 W40686 W40687 1 W47444 ➂JN423 W42045 W42046 1 W47445 ➂JN424 W40702 ➃ W40703 ➃ 1 W47974 W67714JN425 W30648 ➃ W30644 ➃ 3 W60992 W67712JN426 W36954 ➃ W36953 ➃ 3 W60993 W67713


JF421 W40683 W40684 2 — ➂JF422 W40692 W40693 2 — ➂JF423 W40699 W40700 2 W47455 ➂JF424 W40706 ➃ W40707 ➃ 4 W47974 W67714JF425 W30648 ➃ W30644 ➃ 4 W60992 W67712JF426 W36954 ➃ W36953 ➃ 4 W60993 W67713


GNF321 ➅ W410473B — 1 W410190 ➂JU321 W40691 — 1 — ➂JU322 W45078 — 1 W47444 ➂JU323 W45079 — 1 W47445 ➂JU324 W40705 ➃ — 1 W47974 W67714JU325 W30642 ➃ — 1 W60992 W67712JU326 W30643 ➃ — 1 W60993 W67713

240 Volts Max Non-Fusible - 3 Pole, 3 Wire

GF221NR ➅ W410472A ➁ — 1 W410190 ➀ ➂NR321 W50125 ➁ — 1 ➀ ➂NR322 W40688 W40687 1 ➀ ➂NR323 W411039 W40696 1 ➀ ➂NR324 W44351 ➃ W40712 ➃ 1 ➀ W67714NR325 W30648 ➃ W30644 ➃ 2 W60992 W67712NR326 W36954 ➃ W36953 ➃ 2 W60993 W67713


GF321NR ➅ W410473A ➁ — 1 W410190 ➀ ➂NR421 W40681 ➁ — 1 — ➂NR422 W40686 W40687 1 W47444 ➂NR423 W411040 W40696 1 W47445 ➂NR424 W44350 ➃ W40703 ➃ 1 W47974 W67714NR425 W30648 ➃ W30644 ➃ 3 W60992 W67712NR426 W36954 ➃ W36953 ➃ 3 W60993 W67713


GNF321R ➅ W410473B — 1 W410190 ➂NFR321 W40691 — 1 — ➂NFR322 W45078 — 1 — ➂NFR323 W411041 — 1 — ➂NFR324 W44352 ➃ — 1 — W67714


➀ Neutral included on replacement line base.➁ One piece line and load base.➂ Wire grips included on line and load base assemblies.

➃ Wire grips must be ordered separately.➄ Each wire grip kit contains one wire connector

plus mounting hardware.➅ This switch employs a visible blade, double

break design.

Line Base Assembly (W30648)

4

Heavy Duty Enclosed Switch (240 Volts) Vacu-Break Type Replacement Parts

1 Piece Line/Load Base Assembly

Represents a 30 Amp 240V Heavy Duty Switch (SN321)

Represents a 2-Pole 3-Wire Replacement Base (W50125)

Hinged Line Terminal Shield

Phenolic Base Assembly (1 Piece Design)


Solid Neutral

Load Side Wire Grips

Load Side Contact

Line Side Wire Grips

Line Side Contact

Spring-ReinforcedFuse Clipss

Vacu-Break Head

Note: All parts shown above are included with the replacement base and will not be sold separately.

5

Heavy Duty Enclosed Switch (240 Volts)Vacu-Break Type Replacement Parts

30/60 Amp 240V Neutral (W47444)

Line/Load Base Assembly (W50125)


Type 1 Indoor

Type 3R Outdoor

SN321 W50125 ➁ — 1 ➀ ➂SN322 W52315 W52320 1 ➀ ➂SN323 W40697 W40696 1 ➀ ➂SN324 W58377 ➃ W40712 ➃ 1 ➀ W67714SN325 W30648 ➃ W30644 ➃ 2 W60992 W67712SN326 W36954 ➃ W36953 ➃ 2 W60993 W67713SN327L ➆ ➇ W30648 ➃ W411043 ➅ 4 W68739 W67713 ➆SN328L ➆ ➇ W52310 ➃ W411044 ➅ 4 W68740 W67712 ➆


SN421 W40681 ➁ — 1 — ➂SN422 W52317 W52320 1 W47444 ➂SN423 W40695 W40696 1 W47445 ➂SN424 W58876 ➃ W40703 ➃ 1 W47974 W67714SN425 W30648 ➃ W30644 ➃ 3 W60992 W67712SN426 W36954 ➃ W36953 ➃ 3 W60993 W67713SN427L ➆ ➇ W30648 ➃ W411043 ➅ 6 W68739 W67713 ➆SN428L ➆ ➇ W52310 ➃ W411044 ➅ 6 W68740 W67712 ➆


F421 W40683 W40684 2 — ➂F422 W40692 W40693 2 W47444 ➂F423 W40699 W40700 2 W47455 ➂F424 W40706 ➃ W40707 ➃ 4 W47974 W67714F425 ➆ ➇ W30648 ➃ W30644 ➃ 4 W60992 W67712F426 ➆ ➇ W36954 ➃ W36953 ➃ 4 W60993 W67713


NRH321 W50125 ➁ — 1 ➀ ➂NRH322 W40688 W40687 1 ➀ ➂NRH323 W40697 W40696 1 ➀ ➂NRH324 W58877 ➃ W40712 ➃ 1 ➀ W67714NRH325 W30648 ➃ W30644 ➃ 2 W60992 W67712NRH326 W36954 ➃ W36953 ➃ 2 W60993 W67713NRH327L➆ ➇ W30648 ➃ W411043 ➅ 4 W68739 W67713 ➆NRH328L➆ ➇ W52310 ➃ W411044 ➅ 4 W68740 W67712 ➆


2NRH421 W40681 ➁ — 1 W47444 ➂NRH422 W411037 W40687 1 W47444 ➂NRH423 W40695 W40696 1 W47445 ➂NRH424 W58876 ➃ W40703 ➃ 1 W47974 W67714NRH425 W30648 ➃ W30644 ➃ 3 W60992 W67712NRH426 W36954 ➃ W36953 ➃ 3 W60993 W67713NRH427L➆ ➇ W30648 ➃ W411043 ➅ 6 W68739 W67713 ➆NRH428L➆ ➇ W52310 ➃ W411044 ➅ 6 W68740 W67712 ➆


➀ Neutral included on replacement line base.➁ One piece line and load base.➂ Wire grips included on line and load base

assemblies.➃ Wire grips must be ordered separately.➄ Each wire grip kit contains one wire connector

plus mounting hardware.

➅ Load base is a one piece design which includes all 3-poles. Only order one per switch.

➆ Wire grips are included on the load base assembly.➇ The line base assembly contains two poles per

phase which are connected with a connection strap. If this connection strap is required see page 6 for catalog numbers.

Catalog Number



6


Replacement Line Base (W60527)

Replacement Load Base (W411042)


Type 4, 4X Stainless Steel

Type 12, Industrial

F321SS W411032 ➀ — 1 W47444 ➁F322SS W411037 W40687 1 W47444 ➁F323SS W40695 W40696 1 W47445 ➁F324SS W60527 ➂ W411042 1 W47974 W67714F325SS W30648 ➂ W30644 ➂ 3 W60992 W67712F326SS W36954 ➂ W36953 ➂ 3 W60993 W67713F327SSL ➆ ➇ W30648 ➂ W411043 ➅ 6 W68739 W67713 ➆


F321H W411032 ➀ — 1 W47444 ➁F322H W411037 W40687 1 W47444 ➁F323H W40695 W40696 1 W47445 ➁F324H W60527 ➂ W411042 1 W47974 W67714F325H W30648 ➂ W30644 ➂ 3 W60992 W67712F326H W36954 ➂ W36953 ➂ 3 W60993 W67713F327HL ➆ ➇ W30648 ➂ W411043 ➅ 6 W68739 W67713 ➆


➀ One piece line and load base.➁ Lugs included on line and load base assemblies.➂ Lugs must be ordered separately.➃ Each lug kit contains one wire connector plus

mounting hardware.➅ Load base is a one piece design which

includes all 3-Poles. Only order one per switch.

➆ Wire grips are included on the load base assembly.

➇ The line base assembly contains two poles per phase which are connected with a connection strap.

Catalog Number



Replacement Handles

400 & 600 Amp W411035800 & 1200 Amp W411036

Switch Catalog Number

Replacement Line Terminal Shield

400 & 600 Amp 2-Pole Type 1 W411100400 & 600 Amp 3-Pole Type 1 W411101

and all Type 3R, 4/4X & 12800 & 1200 Amp W411099


Phase Pole Connection Strap ➇

800 & 1200 Amp Non-Fuse W411105800 Amp Fused W4111021200 Amp Fused W411103


400 - 1200 Amp Miscellaneous Parts

7

Heavy Duty Enclosed Switch Vacu-Break Type Replacement Parts

Represents a 400 Amp Line Base Assembly (W30648)

Represents one pole of a 400 Amp Line Side Replacement Base Assembly (W30648)



Porcelain Base Assembly

Line Side Contact

Wire Grip Mounting Stud

Load Side Contact

Spring-ReinforcedFuse Clip

Vacu-Break Head


8


Line Side Base Assembly

Load Side Base Assembly

Represents a 100 Amp 600V Heavy Duty Switch (F353)

Represents a 100 Amp Line Side Replacement Base Assembly (W407695)



Porcelain Base Assembly

Load Side Contact

Line Side Wire Clips

Line Side Contact

Spring-ReinforcedFuse Clips

Vacu-Break Head


9

Heavy Duty Enclosed Switch (600 Volts) Vacu-Break Type Replacement Parts

Line Side Base Assembly

Load Side Base Assembly

Represents a 200 Amp 600V Heavy Duty Switch (FR354)

Represents a 200 Amp Line Side Replacement Base Assembly (W58876)



Base AssemblyMounting HolesBase Assembly

Line Side Contact

Wire Grip Mounting Studs

Load Side Contact

Spring-ReinforcedFuse Clips

Vacu-Break Head


10



Load Base Assembly (W40696)

Type 1 Indoor

Type 3R Outdoor

F351 W40709 W40710 1 W53044 ➀F352 W52316 W52319 1 W53044 ➀F353 W40695 W40696 1 W53045 ➀F354 W58876 ➁ W40703 ➁ 1 W47974 W67714F355 W30648 ➁ W30644 ➁ 3 W60992 W67712F356 W36954 ➁ W36953 ➁ 3 W60993 W67713F357L ➄ ➅ W30648 ➁ W411043 ➃ 6 W68739 W67713 ➄F358L ➄ ➅ W52310 ➁ W411044 ➃ 6 W68740 W67712 ➄


FR351 W411033 W411034 1 W53044 ➀FR352 W40689 W40690 1 W53044 ➀FR353 W40695 W40696 1 W53045 ➀FR354 W58876 ➁ W40703 ➁ 1 W47974 W67714FR355 W30648 ➁ W30644 ➁ 3 W60992 W67712FR356 W36954 ➁ W36953 ➁ 3 W60993 W67713FR357L ➄ ➅ W30648 ➁ W411043 ➃ 6 W68739 W67713 ➄FR358L ➄ ➅ W52310 ➁ W411044 ➃ 6 W68740 W67712 ➄


NF351 W40691 — 1 — ➀NF352 W52314 — 1 W53044 ➀NF353 W40698 — 1 W53045 ➀NF354 W60528 ➁ — 1 W47974 W67714NF355 W30642 ➁ — 3 W60992 W67712NF356 W30643 ➁ — 3 W60993 W67713NF357 ➅ W30642 ➁ — 6 W68739 W67713NF358 ➅ W30643 ➁ — 6 W68740 W67712


NFR351 W40691 — 1 — ➀NFR352 W43389 — 1 W53044 ➀NFR353 W40698 — 1 W53045 ➀NFR354 W58878 ➁ — 1 W47974 W67714NFR355 W30642 ➁ — 3 W60992 W67712NFR356 W30643 ➁ — 3 W60993 W67713NFR357 ➅ W30642 ➁ — 6 W68739 W67713NFR358 ➅ W30643 ➁ — 6 W68740 W67712


➀ Lugs included on line and load base assemblies.➁ Lugs must be ordered separately.➂ Each lug kit contains one wire connector plus

mounting hardware.➃ Load base is a one piece design which includes

all 3-poles. Only order one per switch.

➄ Wire grips are included on the load base assembly.➅ This line base assembly contains two poles per

phase which are connected with a connection strap. If this connection strap is required see page 6 for catalog numbers.

Catalog Number





Siemens Energy & Automation, Inc. Distribution Products Division5400 Triangle Pkwy.Norcross, GA 300921-800-964-4114

© 1998 Siemens Energy & Automation, Inc. Bulletin IPPC-SB02A-0898Siemens is a registered trademark of Siemens AG. 5M0898CP Printed in U.S.A.

Type 4X, Stainless Steel

Type 12, Industrial

F351SS W40709 W40710 1 W53044 ➀F352SS W40689 W40690 1 W53044 ➀F353SS W40695 W40696 1 W53045 ➀F354SS W60527 ➁ W411042 ➁ 1 W47974 W67714F355SS W30648 ➁ W30644 ➁ 3 W60992 W67712F356SS W36954 ➁ W36953 ➁ 3 W60993 W67713F357SSL ➄ ➅ W30648 ➁ W411043 ➃ 6 W68739 W67713 ➄


F351H W40709 W40710 1 W53044 ➀F352H W40689 W40690 1 W53044 ➀F353H W40695 W40696 1 W53045 ➀F354H W60527 ➁ W411042 ➁ 1 W47974 W67714F355H W30648 ➁ W30644 ➁ 3 W60992 W67712F356H W36954 ➁ W36953 ➁ 3 W60993 W67713F357HL ➄ ➅ W30648 W411043 ➃ 6 W68739 W67712 ➄


NF351SS W82931 — 1 W53044 ➀NF352SS W43389 — 1 W53044 ➀NF353SS W40698 — 1 W53045 ➀NF354SS W60528 ➁ — 1 W47974 W67714NF355SS W30642 ➁ — 3 W60992 W67712NF356SS W30643 ➁ — 3 W60993 W67713NF357SS ➅ W30642 ➁ — 6 W68739 W67713


NF351H W82931 — 1 W53044 ➀NF352H W43389 — 1 W53044 ➀NF353H W40698 — 1 W53045 ➀NF354H W60528 ➁ — 1 W47974 W67714NF355H W30642 ➁ — 3 W60992 W67712NF356H W30643 ➁ — 3 W60993 W67713NF357H ➅ W30642 — 6 W68739 W67713


➀ Lugs included on line and load base assemblies➁ Lugs must be ordered separately.➂ Each lug kit contains one wire connector plus

mounting hardware.➃ Load base is a one piece design which includes

all 3-poles. Only order one per switch.

➅ The line base assembly contains two poles per phase which are connected with a connection strap. If this connection strap is required see page 6 for catalog number.

Catalog Number




Load Base Assembly (W30644)

Documents

General and Heavy Duty Vacu-Break Enclosed Switch Replacement