Upload
phungcong
View
224
Download
2
Embed Size (px)
Citation preview
Typical application of
GETREN® P sliding agents
Our GETREN® P series was developed for the coating of rubber surfaces.
This coating facilitates the assembling of rubber profiles for
construction or window frames made of aluminum, plastics or wood.
Page | 2 GETREN P ® Series
Without a lubricant, the rubber and the metal
surface are in direct contact
The sliding of the two materials is insufficient
High forces are required to assemble the
rubber profiles to the frame
Sliding agents play a significant role for
the handling of different surfaces
Rubber
Metal Oxygen
Rubber
Metal Fluid
Rubber
Metal Pasty
When using a lubricant, the rubber and the metal
surface are not in direct contact
Liquid lubricants:
non-drying, e.g. silicone oil
drying resulting in pasty appearance,
e.g. OMS based sliding polymers
Page | 3 GETREN P ® Series
There are two common ways of
applying sliding agents
Spraying procedure Dipping procedure
Electrical control and
control elements
Page | 4 GETREN P ® Series
Products of the GETREN® P series
Products Rubber Type Comment Chemical Base
(Active Content)
Efflux Time
(DIN EN ISO 2431)
GETREN® P 3000 All types of
rubber
Compatible with
Plexiglas® Silicone oil (35%) 20-40 sec
GETREN® P 3300 All types of
rubber
Compatible with
Plexiglas® and self
cleaning glasses*
OMS (100%) 20-40 sec
GETREN® P 3600 All types of
rubber
Compatible with
Plexiglas® and self
cleaning glasses*
OMS (30%),
aqueous emulsion 20-40 sec
GETREN P ® Series Page | 5
* compatibility confirmed by Pilkington
All GETREN® P products significantly
reduce the coefficient of friction
0
0,25
0,5
0,75
1
Control Silicone oil Getren®P3300
Getren®P3600
Coeff
icie
nt
of
Fri
cti
on
Page | 6 GETREN P ® Series
Formation of a flexible and stable film on the profile surface that looks
perfectly homogeneous
No influence on surrounding materials
GETREN P ® Series
OMS based sliding polymers provide a more
homogeneous surface than silicone oils
GETREN® P 3600 Surface looks homogeneously mat
although coated
GETREN ® P 3000 Surface looks always wet and oily
GETREN® P 3300 Surface looks homogeneously mat
although coated
Page | 7
Improved optical characteristics by intensifying the color strength of
treated rubber profiles
GETREN P ® Series
Rubber profiles coated with OMS have a
much better optical appearance
Profile coated with
GETREN® P 3600
or P 3300
Uncoated Profile
Page | 8
Suitable for window glasses having self cleaning effect
GETREN P ® Series
Self cleaning glasses are not being harmed
by our OMS based sliding polymers
No visible border formation
by coating with GETREN®
P 3300 or P 3600
Visible border formation
caused by coating with a
standard product
Indicated in the technical
information brochures of
Pilkington
Page | 9
GETREN P ® Series
Contaminations with OMS based sliding
polymers can be easily removed
Source: www.henkel.de
if glass surfaces are contaminated by GETREN® P 3300 or P 3600,
they can be easily removed by using non-abrasive standard
detergent solutions, this needs to be done promptly before the
product dries out
Page | 10
GETREN® P 3600, being our eco-friendly
solution, offers even more advantages
GETREN® P 3600 does not contain any solvents or VOC substances.
It is 98 % biodegradable (as determined by the Zahn-Wellens-Test
OECD 302 B) by DIN EN ISO 9888 within 7 days.
That means no use of solvent resistant rubber gloves (e.g. nitril or fluorinated
rubber gloves) is necessary when wet profiles are handled.
Advantages during production
No exhaust system required
No static charging occurs
No fire hazard
No special storage conditions
Page | 11 GETREN P ® Series
GETREN® P 3300 and P 3600 outperform
silicone oil emulsions in several parameters
GETREN® P 3000 GETREN® P 3300 GETREN® P 3600
Sliding properties ++ + +
Compatibility with
self cleaning glass no yes* yes*
Wet profile + − −
Migration yes no no
Solvent no yes no
Storability
of coated profiles + ++ ++
Paintability of coated
profiles − ++ ++
Page | 12 GETREN P ® Series
* compatibility confirmed by Pilkington