2
FREE CALL - 1300 877 554 - WWW.GIANTPOWER.COM.AU Last updated on June 16, 2015 10:46 AM Giant Power Integrated Power Systems (IPS) are the ultimate all-in-one unit for managing solar and battery systems. Each IPS combines the functionality of a solar charge controller, pure sine wave inverter, and multi-stage AC battery charger into one central unit, eliminating the need for numerous devices and excess cabling. Ideal for portable power setups such as caravans or motorhomes, and offgrid power setups in remote locations. Giant Power 24V 2400W Integrated Power System (MPPT) IPS-2400WM Specifications Giant Power 24V 2400W IPS General Electrical Nominal DC Voltage 24V (MAX 30V) Peak Efficiency 93% Inverter Continuous Output 2.4KW Surge Rating 4.8KW (5 seconds max) Output Waveform Pure Sine Wave Output Voltage 230VAC + / - 5% Output Regulation < 3% RMS for battery voltage range Output Short Circuit Circuit Breaker AC Battery Charger Charging Mode 3-stage Boost Voltage 29.2V (Flooded) 28.2V (MF) Float Voltage 27.0V (Flooded) 27.0V (MF) AC Recharging Current 20/30 Amp (adjustable) AC Input (Mains/Generator) Input Voltage Range 90~280VAC (Appliance mode) 170~280VAC (UPS mode) Solar Charge Controller Type Maximum Power Point Tracking (MPPT) Max Charging Current 25 Amp Max PV Input/Output 600W Max PV Input Voc 75V MPPT Range 30-66V Environmental / Mechanical Temperature Range Operating: 0ºC ~ 55ºC Storage: -15ºC ~ 60ºC Dimension 355mm x 272mm x 128mm Net Weight 8.5kg MPPT MPPT 25A MPPT Solar Charge Controller PURE PURE SINE SINE 2400W Pure Sine Wave Inverter MULTI MULTI STAGE STAGE 30A Multi-Stage Battery Charger AUTO AUTO GEN GEN Auto-Start Generator Functionality MAINS MAINS AC AC Integrate with Mains Power LCD LCD LCD Control Panel DATA DATA Monitoring & Data Recording Software Key Features * Software Compatible with Windows & Linux Australian Support, Warranty & Repairs 2 YEAR WARRANTY - REPAIR OR REPLACEMENT Other Features Compatible with AGM, Gel and SLA Batteries Adjustable charge voltage and current 2x inverter surge capacity (5s) Overload, temperature and short circuit protection Light weight high frequency transformer Low standby current Anti-Vibration Upgrade * Software Compatible with Windows & Linux Clean Energy Council Approved Giant Power IPS units are approved off grid inverters suitable for installation under the Renewable Energy Certificate scheme.

Giant Power 24V 2400W Integrated Power System (MPPT) · ALL 100 554 Last updated on June 16, 2015 10:46 AM 50 Giant Power Integrated Power Systems (IPS) are the ultimate all-in-one

  • Upload
    dophuc

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

FREE CALL - 1300 877 554 - WWW.GIANTPOWER.COM.AU 50Last updated on June 16, 2015 10:46 AM

Giant Power Integrated Power Systems (IPS) are

the ultimate all-in-one unit for managing solar and

battery systems. Each IPS combines the functionality

of a solar charge controller, pure sine wave inverter,

and multi-stage AC battery charger into one central

unit, eliminating the need for numerous devices

and excess cabling. Ideal for portable power setups

such as caravans or motorhomes, and offgrid power

setups in remote locations.

Giant Power 24V 2400W Integrated Power System (MPPT)

I PS-2400WM

Specifications Giant Power 24V 2400W IPS

General Electrical

Nominal DC Voltage 24V (MAX 30V)

Peak Efficiency 93%

Inverter

Continuous Output 2.4KW

Surge Rating 4.8KW (5 seconds max)

Output Waveform Pure Sine Wave

Output Voltage 230VAC + / - 5%

Output Regulation < 3% RMS for battery voltage range

Output Short Circuit Circuit Breaker

AC Battery Charger

Charging Mode 3-stage

Boost Voltage29.2V (Flooded)28.2V (MF)

Float Voltage27.0V (Flooded)27.0V (MF)

AC Recharging Current 20/30 Amp (adjustable)

AC Input (Mains/Generator)

Input Voltage Range90~280VAC (Appliance mode)170~280VAC (UPS mode)

Solar Charge Controller

Type Maximum Power Point Tracking (MPPT)

Max Charging Current 25 Amp

Max PV Input/Output 600W

Max PV Input Voc 75V

MPPT Range 30-66V

Environmental / Mechanical

Temperature RangeOperating: 0ºC ~ 55ºCStorage: -15ºC ~ 60ºC

Dimension 355mm x 272mm x 128mm

Net Weight 8.5kg

MPPTMPPT25A MPPT Solar Charge Controller

PUREPURE

SINESINE

2400W Pure Sine Wave Inverter

MULTIMULTI

STAGESTAGE

30A Multi-Stage Battery Charger

AUTOAUTO

GENGEN

Auto-Start Generator Functionality

MAINSMAINS

ACAC

Integrate with Mains Power

LCDLCD

LCD Control Panel

DATADATA Monitoring & Data Recording Software

Key Features

* Software Compatible with Windows & Linux

Australian Support, Warranty & Repairs2 YEAR WARRANTY - REPAIR OR REPLACEMENT

Other FeaturesCompatible with AGM, Gel and SLA Batteries

Adjustable charge voltage and current

2x inverter surge capacity (5s)

Overload, temperature and short circuit protection

Light weight high frequency transformer

Low standby current

Anti-Vibration Upgrade

* Software Compatible with Windows & Linux

Clean Energy Council ApprovedGiant Power IPS units are approved off grid inverters suitable for installation under the Renewable Energy Certificate scheme.

FREE CALL - 1300 877 554 - WWW.GIANTPOWER.COM.AU 51Last updated on June 16, 2015 10:46 AM

Giant Power Integrated Power Systems (IPS) are

the ultimate all-in-one unit for managing solar and

battery systems. Each IPS combines the functionality

of a solar charge controller, pure sine wave inverter,

and multi-stage AC battery charger into one central

unit, eliminating the need for numerous devices

and excess cabling. Ideal for portable power setups

such as caravans or motorhomes, and offgrid power

setups in remote locations.

Giant Power 24V 2400W Pro Integrated Power System (MPPT)

I PS-2400WMX

Specifications Giant Power 24V 2400W Pro IPS

General Electrical

Nominal DC Voltage 24V (MAX 30V)

Peak Efficiency 93%

Inverter

Continuous Output 2.4KW

Surge Rating 4.8KW (5 seconds max)

Output Waveform Pure Sine Wave

Output Voltage 230VAC + / - 5%

Output Regulation < 3% RMS for battery voltage range

Output Short Circuit Circuit Breaker

AC Battery Charger

Charging Mode 3-stage

Boost Voltage29.2V (Flooded)28.2V (MF)

Float Voltage27.0V (Flooded)27.0V (MF)

AC Recharging Current 20/30 Amp (adjustable)

AC Input (Mains/Generator)

Input Voltage Range90~280VAC (Appliance mode)170~280VAC (UPS mode)

Solar Charge Controller

Type Maximum Power Point Tracking (MPPT)

Max Charging Current 60 Amp

Max PV Input/Output 1500W

Max PV Input Voc 145V

MPPT Range 30-115V

Environmental / Mechanical

Temperature RangeOperating: 0ºC ~ 55ºCStorage: -15ºC ~ 60ºC

Dimension 479mm x 295mm x 140mm

Net Weight 12kg

MPPTMPPT60A MPPT Solar Charge Controller

PUREPURE

SINESINE

2400W Pure Sine Wave Inverter

MULTIMULTI

STAGESTAGE

30A Multi-Stage Battery Charger

AUTOAUTO

GENGEN

Auto-Start Generator Functionality

MAINSMAINS

ACAC

Integrate with Mains Power

LCDLCD

LCD Control Panel

DATADATA Monitoring & Data Recording Software

Key Features

* Software Compatible with Windows & Linux

Australian Support, Warranty & Repairs2 YEAR WARRANTY - REPAIR OR REPLACEMENT

Other FeaturesCompatible with AGM, Gel and SLA Batteries

Adjustable charge voltage and current

2x inverter surge capacity (5s)

Overload, temperature and short circuit protection

Light weight high frequency transformer

Low standby current

Anti-Vibration Upgrade

* Software Compatible with Windows & Linux

Clean Energy Council ApprovedGiant Power IPS units are approved off grid inverters suitable for installation under the Renewable Energy Certificate scheme.