Global Technical Services Profile · Process Corporates Manpower capacity ... 1-Yokogawa “IT-PLC , DCS, RTU, SCADA, Test, Measurement and Field Instruments” Yokogawa is a leading

Global Technical Services Profile

The document proposes to illustrate the company technical and financing capabilities.

Web: www.Globalts-eg.com

Email: [email protected] Tel. +202 27055222-+202 27055333 Fax: +202 27055444

Page 1

Table of Contents Chapter I: Corporates Data ................................................................................................................... 2

Global Technical Services G.T.S ................................................................................................................. 2

Global Gas & Electromechanical. .............................................................................................................. 2

Global Limited for Electrical Contracting, Kuwait. .................................................................................... 2

Chapter II: Introduction ................................................................................................................................ 3

Company Description ................................................................................................................................ 3

Vision & Mission........................................................................................................................................ 4

Corporate Organization Chart ................................................................................................................... 5

Corporates Manpower capacity ............................................................................................................... 5

Products and Services: .............................................................................................................................. 6

I&C Solutions ......................................................................................................................................... 6

Field Services ......................................................................................................................................... 7

Maintenance Services ........................................................................................................................... 8

Electro-Mechanical (By GTS Gas & Electromechanical) ........................................................................ 9

Trading & Supply ................................................................................................................................... 9

Training ............................................................................................................................................... 10

Target Customers .................................................................................................................................... 11

Our Selectable Partners .......................................................................................................................... 12

Our Clients .............................................................................................................................................. 18

GTS Quality Assurance ................................................................................................................................ 19

Chapter III: Reference Projects (Sample) .................................................................................................... 22

Engineering & Services ............................................................................................................................ 22

http://www.globalts-eg.com/

mailto:[email protected]



Page 2

Chapter I: Corporates Data

Global Technical Services G.T.S Corporate Name Global Technical Services (G.T.S)

Chairman Mr. Amin Mohamed Saber Managing Director Mr. Mohamed Shawky

Corporate Type S.A.E

Tax card No.

227-796-888

Corporate address 16A from 300st. New Maadi, Cairo. Fabrication facility address 180 Block, Robiki are ,Badr City EGAS Registration No. 1660

EGPC Registration No. 66/07/04/2014

Global Gas & Electromechanical.

Corporate Name Global Gas & Electromechanical

Chairman & Mr. Abdelnaby Mansour

Managing Director


Commercial registration.

78625

Corporate address 16A from 300st. New Maadi, Cairo

Global Limited for Electrical Contracting, Kuwait.

Corporate Name Global Limited for electrical contracting, Kuwait

Chairman Mr. Mohamed abo-Raquba Managing Director Mr. Mahmoud nasr


Commercial registration.

338699

Corporate address Block 54, building 8, Al-Mangaf.





Page 3

Chapter II: Introduction

Company Description

Global Technical Services is a Joint-Stock Company, has been established in 2006, by group of

Automation Engineers who have a wide experience of control systems. And reach now almost 70

employees.

Global Technical Services has a very good growth rate over 10 years; starting with 500K USD paid-up

capitals, and reaches revenue 4M USD in year 2015, with regards to unstable Market, political position

and currency floting, Company’s sales booking will reach over 12M USD by the end of 2017.

Global Technical Services is specialist Automation Company provides all kind of automation solution and

equipment such as but not limited to the following:

DCS control systems, PLC’s, SCADA.

Safety, Fire & Gas detection Systems.

Retail Fuel Stations Automatic Tank Gauging.

Retail Fuel Stations dispensers.

Radar Tank Gauging.

Instrumentations (Gauges, Transmitters and Fittings).

Test & Measurements equipment.

We provide services related to Oil and Gas Project such as installation, Commissioning and startup cover

Automation, instrumentation, electrical, mechanical and process, outsourcing our specialist engineers to

help customer/partners in their projects.

Global Technical Services is looking forward to grow in terms of revenue, products, market sectors and

Area coverage to be one of the biggest system integrator in Egypt in the next 3 years and expand our

business in GCC and Africa in the next 5 years.

As we established our office in Kuwait this in 2015.

GTS is registered in EGPC and EGAS as system integrator and service provider with the following

registration number EGPC (66/07/04/2016) & EGAS (1660)

GTS has a wide service projects reference with most of the Egyptian Oil & Gas companies such as

GASCO, Enppi, Rashpetco, ESHPETCO, NOSPOCO, EBGDPCO……….





Page 4

Vision & Mission Our Vision is to be considered the prime system integrator and services providers in Egypt, Middle East

and Africa.

Our Mission is to be consistence with our growth in the local Market and contribute to the local

development and growth. To be exist in the regional market with our long and sustainable experience.

To develop our corporate culture and performance with maintaining our core value ‘one family’.





Page 5

Corporate Organization Chart

Corporates Manpower capacity

Total of 70 Employees plus hundreds of on call manpower joining our projects.

Chairman

MD

HR & Admin

Admin assistance

Legal Department

HR assistance

Finance Manager

GL Accuantants

AP Accuantants

AR Accuantants

Casher

Projects Directors

Project Managers Procurment

logistics

Purchasing

Project finance& admin Interface

Engineering & Commissioning

Manager

I&C Engineering

Electrical Engineering

Mechnical Engineering

(outsourcing)

Process Engineering

(outsourcing)

Commissioning team

Sales Manager

Sales Team leader

Senior Sales Account Manager

Accounts managers

T&M Product Manager

Pre-Sales Manager

Automation Proposal

DCS & PLC Team

SCADA Team

Field instrument proposal

Valves & Fittings

T&M Team

Instrument Team

Exective Secretary

Business Development

Manager

Global Limited Kuwait

Quality Manager





Page 6

Products and Services:

I&C Solutions

G.T.S provides the right industry-specific solutions to deal with ever more critical and complex

challenges at each layer of the business. GTS Instrumentation and control automation solutions and

services go far beyond meeting your immediate needs for application or equipment repair. GTS takes a

long-term, holistic approach to determine your facility and operational needs and develop a strategy for

improving the performance of your people, systems, and processes.

Solutions

Distributed control systems DCS.

Network-based Control Systems.

Emergency shutdown systems and Fire & Gas systems.

Programmable Logic Controllers (PLC’s).

Supervisory control and data acquisition systems (SCADA).

Machinery and Production line automated solutions.

Telemetry systems.

Radar Tank Gauging System (RTG).

Retail Fuel station automatic tank gauging.

Retail Fuel Stations Dispensers.

Continuous Emission Monitoring system (CEMS).

Boiler Managing system (BMS).

Wellhead Control system.

Flare stack ignition system.

Fire Fighting systems.

Engineering Services

DCS, ESD, FGS & PLC’s control systems.

Supervisory control and data acquisition

systems SCADA.

Instrumentation Detail Engineering.

Electrical systems Detail Engineering.

Revamping and Reverse engineering.

Power Monitoring and Interface Systems.

Vibration Monitoring Systems.





Page 7

Field Services

GTS provides Technical Services for Brown and Green fields inside Oil & Gas, Petrochemical,

Manufacturing and Utilities sectors in Egypt Middle East and Africa.

We have the proficiency and resources to support the following services:

Construction and Installation Services

E&I Construction works.

Instrument installation and field calibration.

Cable laying and termination.

Instrument work including instrument calibration,

tubing installation.

Junction Box, Local Panels, DCS/ESD

Mechanical Construction works.

Piping fabrication and erection.

Installation Supervision and Site Management.

Commissioning, Start-up Services

Mechanical completion, Calibration, Commissioning

and start-up services.

Marked-up and As-built Drawings

Operating procedures and manuals.

Plant performance tests.





Page 8

Maintenance Services

GTS provides maintenance Services and programs to Oil & Gas, Petrochemical, Manufacturing and Utilities.

General Services

Global Maintenance System (GMS)

Maintenance for Electrical equipment

and field instruments.

Preventive Maintenance for Control

systems.

Turbine and Generator overhaul.

Valves overhaul.

Maintenance Procedures and

Manuals.

Computerized Maintenance Management System (CMMS)

Implementation of CMMS for heavy and new

technologies industries.

Development of Policies, Strategies and Procedures.

Applying RCM, RBI, IPF and Condition based

Maintenance …etc.

Maintenance Programs, Procedures and Work

instructions for field Equipment; Mechanical,

Electrical, instrument and Control Systems.

Implementation of Stock Management Systems,

Create required inventory.

Applying coding standards (MESC, NSN, etc.),

development of SPIR and Min. /Max. /Reorder

Inventory levels.

Manpower Outsourcing Services

I&C details engineering Candidates. Mechanical Engineering Candidates Mechanical, E&I Construction Candidates Automation systems Engineers





Page 9

Electro-Mechanical (By GTS Gas & Electromechanical)

GTS provides Technical Services to the industry projects including Oil & Gas, Petrochemical, Manufacturing, Infrastructure and Utilities in Egypt, Middle East and Africa.

Trading & Supply

GTS supplies wide range bulk and consumable materials Oil & Gas, Petrochemical, Manufacturing, Infrastructure and Utilities in Egypt, Middle East and Africa.

Natural Gas, LPG & SNG

Design and installation of Gas networks. Installation and erection for domestic

sector. Installation and erection for industrial and

commercial sectors.

Firefighting

Design and installation of Firefighting Networks.

Supply for Firefighting Equipment. Supply for low current Equipment.

HVAC

Design and installation of HVAC

Supply for Equipment

Supply for low current Equipment

Field Instruments - SMART/HART Field instrument. - FF Field instrument. - Control valves. - Shutdown/Blow down Valves.

Test and measurements

- Portable test instruments.

- Decade Boxes for resistance, inductance, and capacitance.

- Multifunction Calibrators.

- Process Industry Calibrators for temperature, pressure, and loop signals.

- Programmable Instruments which can be controlled via GPIB, RS232, and USB.

- Calibration Software

- Calibration Benches

Piping & Fittings - Pipes - Fittings - Flanges





Page 10

Training

GTS Training Center is a specialized Training & Business Development services established to transfer the

practical experiences not only “the academic Knowledge” to support industrial companies in Egypt,

Middle East and Africa regions

Technical

- Industrial Process Automation Systems.

- Control & Measurement Systems

- Industrial Electronic Systems & Applications

- Electrical Applications

- Maintenance

- Oil & Gas Production

- Safety

Business Management

- Management

- Business Administration

- Human Resources

- Accounting & Finance

- Marketing and Sales

- Personal Skills

- All other Business Management areas





Page 11

Target Customers Following the target market and sectors:

1. Oil & Gas. a. Refineries. b. Petrochemicals. c. Production. d. Transmission. e. Marketing

2. Utilities: a. Power generation. b. Gas metering. c. Water companies.

3. Industries: a. Steel industry. b. Fertilizing industry. c. Paper. d. Home appliance. e. Pharmaceutical industry.

4. Food and beverage

a. Food Oil. b. Sugar industries.





Page 12

Our Selectable Partners

1- Yokogawa “IT-PLC , DCS, RTU, SCADA, Test, Measurement and Field

Instruments”

Yokogawa is a leading control company and

pioneer in the development of distributed control

systems for the monitoring and control of

processes in a broad range of production facilities.

Its comprehensive solutions range from sensors

(such pressure transmitters, flow meters, and

analyzers), test and measurement instrument to

control systems software that improves

productivity, and services that optimize plant

lifecycle costs. These solutions currently play

vital supporting roles for customers in the oil

chemical, natural gas, electric power, iron and

steel, pharmaceuticals, food, and other industries.

Oscilloscopes Data Acquisition Systems

Hart Communicators

Calibrators

Differential Pressure Transmitters

Gas Chromatograph

DCS Centum VP PLC FA-M3

Safety System PLC & RTU Stardom

Magnetic Flow Meters Coriolis Flow Meters

Gas Analyzers Liquid Analyzers

Multimeters





Page 13

2- HSME Corporation “Valves & Fittings” Exclusive Agent

HSME corporation, Founded in 1979, is one of the world leading

manufacturers of valves, fittings, and sub-systems for instrumentation,

shipbuilding, diesel engine industries.

In the past four decades, HSME has gained excellent recognition from

clientele including HYUNDAI heavy industries, DAE WOO and marine, STX

offshore, MAN Diesel and DOOSAN heavy industry.

Due to the excellency HSME has provided in product quality and services, HYUNDAI and DOOSAN

have given HSME” Authorization of autonomy test” on the products HSME supply to.

Fittings

Valves





Page 14

3- Schneider – Electric “PLC, SCADA”

(System Integrator)

Schneider Electric has unique positions to provide you with innovative integrated solutions

making energy safer, more reliable, more efficient and more productive.

Combining leading edge new businesses- building automation and security, installation systems

and control, power monitoring and control, critical power and cooling services- to our historical

strengths of power and control, we provide you with comprehensive unique answers for

residential, building, energy and infrastructure and data and networks markets.

Schneider has developed a unique worldwide capability to provide these solutions and

transform the way people power & control their environment.

Our solutions help customers reduce costs, stay connected at all times and tap into an ultra-

pure, secure and uninterrupted power supply.

GTS is an authorized system integrator for Schneider Electric in the area of automation, located

in Cairo -Egypt.

GTS not only provides complete automation solutions based on the well-recognized Schneider

Electric automation equipment but also engineering services, spare parts related to PLCs

(programmable logic controllers), SCADA (Supervisory Control and Data Acquisition).

GTS has the Capabilities and the Technical Know-How to tackle major projects in the areas of Oil

and Gas, Chemicals and petrochemicals, water and wastewater treatment, Food and beverage

industries, Metal industries.





Page 15

4- Rockwell Automation

Rockwell Automation, the world's largest company dedicated to industrial automation and information, makes its customers more productive and the world more sustainable. Throughout the world, our flagship Allen-Bradley® and Rockwell Software® product brands are recognized for innovation and excellence. Rockwell Automation senior leadership team is committed to the success of our organization and the significant role the company can play in the global manufacturing landscape

Rockwell Automation products, software and services carry brands recognized globally for quality, innovation and performance.

Rockwell Automation make the community more productive and sustainable through focused giving primarily via our Engineering Our Future™ STEM education and employee volunteers.

Whether it’s managing environmental impact or our interactions with our customers, suppliers and employees, our commitment to responsible business practices is absolute.

Rely on Rockwell Automation to provide a full scope of capabilities to deliver the solutions and services you need now and in the future.

Innovation is at the core of what we need to do to remain a globally competitive business.

Product Scope:-

Distributed Control System (DCS)

Programmable Logic Control system (PLC)

Supervisory control and data acquisition systems (SCADA)

Human Machine Interface (HMI)

Motion Control

Drives





Page 16

5- Emerson ( Rosemount Radar Tank Gauging )

Emerson was founded in 1890 in St. Louis, Missouri, as a -manufacturer

of electric motors and fans. Over the past 100-plus years, we have

grown from a regional manufacturer into a global technology solutions

powerhouse.

Emerson has boldly transformed itself to create value for its

customer and shareholders. With its newly energized focus on its

two core business platforms Automation Solutions and Commercial

& Residential Solutions we can confront the challenges of an

increasingly complex and unpredictable marketplace from a

position of strength. This allows us to drive both near- and long-

term value. And retain our single-trusted-partner status with the

process, industrial, commercial and residential industries.

Emerson has a large scope of products and GTS is a partner with

Emerson SAAB for Radar Tank Gauging.

Improve Terminal Operations with High Performance Bulk Liquid

Measurements:-

Reduce uncertainty in oil inventory and transfers:

• Receive real-time tank data for accurate net volume calculations.

• Get certified custody transfer accuracy.

• Utilize tank capacity efficiently.

Improve safety:

• Comply with overfill prevention standards such as API 2350.

• Use SIL 2 and SIL 3 certified devices.

Simplify installation and terminal operations:

• Benefit from unique 2-in-1 technology.

• Simplify automation and expansion with Smart Wireless.

• Use gauge emulation to replace old mechanical gauges.





Page 17

6- Wayne Fueling Systems – Part of Dover Fueling Solutions

Wayne has been shaping the retail and fleet fueling industry since we designed our first pump in 1891. We were known as the Wayne Oil Tank Company back then, and from the very beginning we were developing a reputation for quality. In fact, this inaugural product won the distinction “The Best Self Measuring Oil Pump” at the Columbian Exposition in Chicago just two years later. Once the motor vehicle entered the scene, our purpose and mission was solidified – to create a reliable, accurate way for motorists to refuel cars.

Throughout the years, Wayne also acquired and partnered with several successful companies to bring our customers more integrated, ground-breaking solutions. After a merger with Dresser Industries in 1968, we were poised to meet the massive market need for fuel dispensers in response to the advent of lead-free gasoline. Shortly after, Wanyne opened our Austin, Texas location, where we continue our deeply-rooted legacy through a commitment to ongoing industry leadership and innovation.

Wayne Fueling Solutions:-

Retail Fuel Stations Automatic Tank Gauging.

Retail Fuel Dispensers.

Fleet Fuel Dispensers.

Payment Security and Technology. Fusion Automation Server

Xflo™ fuel dispensers Xflo™ fuel meter





Page 18

Our Clients

Yokogawa Middle east, UK, Asia, Italy, Netherlands.

Honeywell Middle East Entrag Siemens Egypt

Luberef “Aramco”

KBR (Halliburton)

Silvertech Middle East FZCO

Progetti Europe & Global S.p.A

Engineering for petroleum and process industries

Egyptian Petro Chemicals

Spanish Egyptian Gas Company. SEGAS

Gulf Petroleum Company “GUPCO”

Suez Oil Company “SUCO”

Rashid Petroleum Company

BG , Burullus Gas Company

North Sinai Petroleum Company

KHALDA Petroleum Company

Crystal Asfour

NOSPCO





Page 19

GTS Quality Assurance





Page 20





Page 21





Page 22

Chapter III: Reference Projects (Sample)

Engineering & Services

A. Automation Slolutions

1. Project: Retail Fuel Stations Automatic Tank Gauging for 3100 retail fuel stations all over Egypt Client: EGPC (Egyptian General petroleum Companies)

End Users: Misr Petroleum. COOP, Nile Oil, Total, Exxon Mobil, TAQA, Petromin, OILLIBYA, Emirate

Misr and Watanya

Scope:-

Retail fuel stations automatic tank gauging system for all fuels stations in Egypt installation, commissioning and start up communicating the data to each company head quarter.

2. Project: Revamping for control system in the intake water station no. 2

Client: Ezz Dekheila Steel Company

Scope:-

PLC and Servers supply, installation, commissioning and start up.

3. Project: PLC unit and instrumentation for Tanta site

Client: Petroleum Pipelines Company

Scope:-

PLC and instrumentation supply, integration, installation, commissioning and start up.

4. Project: Radar Tank Gauging for Kattamya Site

Client: Petrogas

Scope:-

3 LPG tanks radar tank gauging system procurement, installation, commissioning and start up.





Page 23

5. Project: Radar Tank Gauging for Kattamya Site

Client: Petrogas

Scope:-

Extra 2 LPG tanks radar tank gauging system procurement, installation, commissioning and start up

6. Project: Radar Tank Gauging for Wadi Feran Site

Client: Nasr Petroleum Company

Scope:-

9 tanks radar tank gauging system procurement, installation, commissioning and start up

7. Project: Pressure Regulating and Metering System for Natural Gas reduction stations for : a. South hurghada Power Plant 60.000 scm/hr – (25/70) bar upstream #600 – 20 barg

downstream #300

b. Sharm El Shiekh Power Plant - PRMS – 60.000 scm/hr – (25/70) bar upstream #600 – 20 barg downstream #300

Client: GASCO

Scope:-

PLC, SCADA, Instrument and Fire Fighting systems installation, commessining and start up

8. Project: Pressure Regulating and Metering System for Natural Gas reduction stations for : a. Hurghada Touristic PRMS and Odorant plant – 20.000 scm/hr – (25/70) bar upstream #600 –

7 barg downstream #150.

Client: Hurghada Touristic

Scope:-






Page 24

9. Project: Pressure Regulating and Metering System for Natural Gas reduction stations for : a. 35.000 scm/hr – (25/70) bar upstream #600 – 7 barg downstream #150.

Client: Fayoum Sugar Factory

Scope:-


10. Project: Pressure Regulating and Metering System for Natural Gas reduction stations for :

a. Pressure Reduction Station, Metering Station and Odorant plant – 60.000 scm/hr – (25/70) bar upstream #600 – 7 barg downstream #150.

Client: New Giza City

Scope:-


11. Project: Pressure Regulating and Metering System for Natural Gas reduction stations for : a. Metering Station and Odorant plant – 25.000 scm/hr – (25/70) bar upstream #600 – 7 barg

downstream #150.

Client: Assuit City PRMS

Scope:-


12. Project: Pressure Regulating and Metering System for Natural Gas reduction stations for : a. PRMS – 5.000 scm/hr – (25/70) bar upstream #600 – 10 barg downstream #150

Client: Engineering Hydrocarbon Company

Scope:-






Page 25

13. Project: PLC and SCADA systems for Water Treatment station

Client: HANDCO

Scope:-

PLC and SCADA supply, installation, commissioning and start up.

14. Project: Extension of Schneider PLC System in (ELAB)

Client: Alexandria Petroleum Maintenance Company (PETROMAINT)

Scope:-

PLC and SCADA supply, installation, commissioning and start up.





Page 26

B. E&I Engineering and construction work

1. Project: Ras Shukheir NGL Plant (2012).

Client: DANA GAS (Egyptian Bahraini Gas Derivatives Company)

Scope: Pre-Commissioning, commissioning and start-up include:

Vessels, Rotating Equipment, Piping , Field instruments and Electrical .

Allen Bradley, Honeywell PCS, ESD & FGS Control systems (H/W, Program S/W…….)

Firefighting system

2. Project: Amal Petroleum Plant (2013-2014).

Client: Amal Petroleum Company (AMPETCO)

Scope: Pre-Commissioning, commissioning and start-up include:

Vessels, Rotating Equipment, Piping , Field instruments and Electrical .

FOXBORO, Triconix PCS, ESD & FGS Control systems (H/W, Program S/W…….)

Firefighting system

3. Project: new Solvents Unit 10 Client: El Alamia for Solvents and plasticizers, EG EPC: AYESA MDE Scope: I&C Engineering, construction, commissioning and startup work include:

Creating I&C deliverables

Engineering and application of control systems from Yokogawa CS3000 DCS system.

Fabrication, installation for instrument supports, Installation, erection, commissioning and startup for field instrument and valves.

Piping fabrication,Pre and post weld heat treatment, inspection.

QA/QC including NDT (Visual inspection, Radiography, UT…etc.).

4. Project: NG De-pressurization Station Client: TAQA Arabia, EG EPC: Akfel Gaz Scope: I&C Engineering, construction, commissioning and startup work include:





Page 27

Creating I&C deliverables and Fabrication, installation for instrument supports.

Engineering and application of control systems for Schneider PLC system.

Installation, erection, commissioning and startup for PLC control system and field instrument

5. Project: Maximization of C2 & C3, GASCO, Egypt (2011).

Client: I.S.G. S.p.A, Italy.

End user: ENPPI/GASCO.

Scope: Piping fabrication for the Molecular sleeves Package including:

Piping bulk material procurement, supply, transportation, storage and control

Pre and post weld heat treatment, inspection.

QA/QC including NDT (Visual inspection, Radiography, UT…etc).

Installations, above and below ground, Installation of all valves.

6. Project: Flare Stack Ignition system replacement. Client: EZZ STEEL EPC: GTS Scope: Engineering, Procurement, construction, commissioning and startup

Creating P&IDs, mechanical drawing and I&C deliverables

Engineering and application of control systems for Schneider PLC system.

Fabrication, erection, installation for stack ignition flare.

Installation, erection, commissioning and startup for ignition control system and field

instrument.

7. Project: Rolling mill unit Client: EZZ steel Vendor: Precast Scope: Engineering and Replacing of the existing SCADA system with an integrated Wonderware

SCADA system.

Revers engineering for existing SCADA system





Page 28

Detailed engineering for integrated Siemens PLC and Wonderware SCADA system.

Demolition of existing system

Installation, commissioning and startup for new SCADA system

8. Project: Beryl Alpha DCS and Alarm Management Upgrade Client: Exxon Mobil North Sea LTD, UK Vendor: Yokogawa (YEF-UK) Scope:

Reverse engineering for existing Berly Alpha EPA PCS system.

Remote Detailed engineering for integrated Yokogawa CS3000 DCS system.


Installation, commissioning and startup for new control system

9. Project: WYTCH Farm CCMS & HMI Replacement, Client: British Petroleum, UK Vendor: Yokogawa (YEF-UK) Scope:

Reverse engineering for existing WYTCH Farm CCMS & HMI system.

Remote Detailed engineering for integrated Yokogawa CS3000 DCS system.



10. Project: Offshore North Sinai Project, Egypt (2011).

Client: North of Sinai Petroleum Company NOSPCO.

Scope:

Engineering consultation (Mechanical, Electrical & instrumentation)

Piping bulk material procurement, supply, transportation, storage and control

Pre and post weld heat treatment, inspection.

QA/QC including NDT (Visual inspection, Radiography, UT…etc).

Installations, above and below ground, Installation of all valves.

Pre-Commissioning, commissioning and start-up include:

Vessels,Rotating Equipment Piping ,Field instruments, Electrical, Emerson PCS, ESD &

FGS Control systems.





Page 29

Firefighting system (Network installation check, clean agent, deluge system….)

Instruments Maintenance service.

11. Project: Unit B compressor house DCS system Revamping Client: El Delta for Fertilizer EPC: Yokogawa Middle East & Africa Scope:

Revers engineering for existing DCS control system

Detailed engineering for integrated Yokogawa CS3000 DCS system.



12. Project: Water lifting Pumping station Client: Egyptian Holding company of water and wastewater EPC: HANDCO Scope: Control Engineering, construction, commissioning and startup

13. Project: Process control Modernization Client: Alex Form EPC: GTS Scope: Engineering and Replacing of the existing SCADA system with an integrated Wonderware

SCADA system.

14. Project: Rehabilitation of a floating dock and the design-build Client: Government of Ghana EPC: Arab contractor Scope: Control Engineering, construction, commissioning and startup.

15. Project: EBIC project, Egypt

Client: “KBR” Kellogg Brown and Root International Incorporated Company.

Scope: construction supervision and commissioning of the instruments and Control works.

16. Project: Sakhalin II project PA-B platform, SEIC Sakhalin Energy Investment Company, Russia.

Client: Yokogawa System Center Europe (YEF-NLS)

Scope: ICSSS integrated commissioning and startup





Page 30

17. Project: New Metering system installation, Pipeline Petroleum Company, Egypt

Client: Progetti Europa & Global S.p.A.

Scope: Instrumentation, commissioning & start-up for the Metering Systems.

18. Project: Kafr Eldawar power station Project, Egypt

Client: Giza Systems

Scope: Instrumentation Engineering, Supply of auxiliary panels and DCS Commissioning and Start-up.

19. Project: Qurayyah Power Plant (SEC) Control System renovation, KSA.

Client: Honeywell Middle East

Scope: E&I Commissioning and startup supervision

20. Project: Soku LGSP De-Bottle-Necking Project, Shell Petroleum Development Company (SPDC),

Nigeria.

Client: PPS manpower with Saipem Contracting Nigeria Limited, Eni Group, Italy

Scope: Field Instrument commissioning and startup

21. Project: Abu Qir power plant, three units of Generator Stators Rewinding Operation, Egypt.

Client: Alstom power Service

Scope: Electrical technician’s manpower.

22. Project: BG WDDM Development projects, Egypt.

Client: Burullus Gas Company

Scope: Engineering consultation, construction supervision and commissioning of the instruments

and Control works.

23. Project: Modernization of Medium Voltage Cable& Cable Trays project, Egypt.

Client: Egyptian company for Plastic and Electricity

Scope: Engineering, supply, fabrication and installation Cable trays and systemizing the power

cables.





Page 31

24. Project: TPSMAP Project, UK

Client: Yokogawa (YEF-UK)

Scope: DCS Engineering FAT in UK

25. Project: Energy From Waste Facility, Kent Enviropower, UK


Scope: DCS installation, commissioning, startup and Operation Support

26. Project: Styrene Mod packs Project, Snam progetti, Iran


Scope: DCS Engineering in UK, installation, commissioning & startup in Iran.

27. Project: Chevron Nigeria commissioning, Nigeria


Scope: commissioning and start up

28. Project: AL WAHA PDH-PP, KSA.

Client: Yokogawa Italy (YEF-I)

Scope: DCS Engineering in Italy and FAT in South Korea

29. Project: BP Bruce projects, UK.


Scope: DCS Engineering and FAT in Netherlands

30. Project: Shell Eastern Petrochemical Complex Project (SEPC) in SINGAPORE


Scope: DCS Engineering in NLs and commissioning & startup in Singapore.

31. Project: Saudi Kayan Petrochemical Company (SAUDI KAYAN), KSA.


Scope: engineering





Page 32

32. Project: Sakhalin II project PA-B platform, SEIC Sakhalin Energy Investment Company, Russia.


Scope: ICSSS integrated commissioning and startup

C. Electro-Mechanical Project: NG installation for 8,500 customers In Damietta.

Client: House Gas.

Scope:

1- Network installation, erection and commissioning 2- Internal installation 3- External installation 4- Test and commissioning 5- Flue installation 6- Convert appliances 7- Piping fabrication according to (ASME B31.3 standard).

Project: NG installation for 5,500 customers In Suez.

Client: House Gas.

Scope:

1- Internal installation 2- External installation 3- Test and commissioning 4- Flue installation 5- Convert appliances 6- Piping fabrication according to (ASME B31.3 standard).

Project: NG installation for 1,500 customers In Moqatum.

Client: NAT GAS.

Scope:






Page 33

Project: NG installation for 500 customers In Suez.

Client: City GAS.

Scope:


Project: NG installation for 350 customers In Hurghada.

Client: City GAS.

Scope:

1- Internal installation 2- External installation 3- Test and commissioning 4- Flue installation 5- Convert appliances 6- Piping fabrication according to (ASME B31.3 standard)

Project: Infrastructure for Lasarina Resort Ain sokhna

Client: Lasarina Resorts.

Scope:

1- PE 100 for water and plumbing 2- Electrical fusion 3- Butt fusion welding 4- Test and commissioning 5- Civil work

Project: Infrastructure for Lasarina Resort Sharm el shikh

Client: Lasarina Resorts.

Scope:

1- PE 100 for water and plumbing 2- Electrical fusion 3- Butt fusion welding 4- Test and commissioning 5- Firefighting network installation





Page 34

Project: Infrastructure for RedCarpet Resort Ain sokhna

Client: RedCarpet Resorts.

Scope:

1- PE 100 for water and plumbing 2- Electrical fusion 3- Butt fusion welding 4- Test and commissioning 5- Firefighting network installation 6- HVAC installation

D. Maintenance Services

1. Project: Sub-sea maintenance build resource Client: Burrullus Gas Company. Scope:

1- Mechanical inspection according to ESHPETCO standards 2- Mechanical Valves overhaul 3- Field instruments testing and recalibration 4- Control system preventive and annual maintenance

2. Project: 2 Years Maintenance contract.

Client: Eshel-Mallaha Petroleum Company ESHPETCO. Scope:

1- Mechanical inspection according to ESHPETCO standards 2- Mechanical Valves overhaul 3- Field instruments testing and recalibration 4- Control system preventive and annual maintenance





Page 35





Page 36





Page 37



Documents

Global Technical Services Profile · Process Corporates Manpower capacity ... 1-Yokogawa “IT-PLC , DCS, RTU, SCADA, Test, Measurement and Field Instruments” Yokogawa is a leading