Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Grant Agreement no : 614002
SCHeMA
INTEGRATED IN SITU CHeMICAL MAPPING PROBE
Collaborative project
OCEAN.2013-2: Innovative multifunctional sensors for in situ monitoring of marine environment and related maritime activities
D10.9 – Report on the applicability of the SCHeMA chemical probes
Due M48 (30.09.2017)
Actual submission date: 10.11.2017 Start date of project: October 1
st, 2013 Duration: 48 months
Organisation name of lead contractor for this deliverable: UNIGE Revision 1.0
Project co-funded by the European Commission within the Seventh Framework Programme (2007-2013)
Dissemination Level
PU Public X
PP Restricted to other programme participants (including the Commission Services)
RE Restricted to a group specified by the consortium (including the Commission Services)
CO Confidential, only for members of the consortium (including the Commission Services)
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 2
Deliverable D10.9
Report on the applicability of the
SCHeMA chemical probes
PU: Public the EU Commission Services
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 3
Project Number : 614002 Project Title : SCHeMA Deliverable Type : PU
Deliverable Number : D10.9 Title of Deliverable : Report on the applicability of the SCHeMA chemical probes Nature of Deliverable : Report Contractual Delivery Date : 30/09/2017 Actual Delivery Date : 10/11/2017 Contributing WPs : WP2, WP3, WP4, WP6, WP7, WP8, WP9, WP10 Author(s) : Mary-Lou Tercier-Waeber (UNIGE) Michela Castelano, Francesco Massa (UNIGe-IT) Antonio Novellino (ETT) Fabio Confalonieri (IDRO)
Abstract This Deliverable presents the submersible and portable chemical mapping probes and the integrated autonomous marine water quality observatory system that were developed, characterized and field-validated as part of SCHeMA. Their analytical performances are reported and their potential contribution to European environmental initiatives and programs evaluated. Finally their present status in view of a commercialization is discussed.
Keyword list
SCHeMA sensing probes, Analytical performances, Potentialities for monitoring initiative and programs, Commercialization.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 4
Table of Content List of symbols and acronyms ............................................................................................................... 5
1 Introduction .................................................................................................................................... 7
2 SCHeMA state of the art developments ......................................................................................... 9
2.1 Trace Metal Sensing Module: TMSM ...................................................................................... 9
2.2 Species relevant to the Carbon Cycle Sensing Module: CSM .............................................. 11
2.3 Nutrients Sensors Module: NSM ............................................................................................ 12
2.4 Miniaturized, multi-channel Algae Sensing Module: ASM ................................................... 12
2.5 Dissolved organic constituent sensing module: VOCs-SM ................................................... 14
2.6 SCHeMA integrated autonomous marine water quality observatory system ......................... 15
3 Performance of the field-evaluated SCHeMA chemical probes .................................................. 17
4 Application for environmental monitoring directives and programs ........................................... 20
4.1 Marine Strategy Framework Directive and Regional Sea Conventions ................................. 20
4.2 Environmental monitoring programs...................................................................................... 22
5 Evaluation for post industrialization/commercialization ............................................................. 24
5.1 NC - Network Controller ........................................................................................................ 25
5.2 TMSM - Three-channel trace metal sensing probe ................................................................ 26
5.3 FACM - Submersible peristaltic pump ................................................................................... 26
5.4 CSM and NSM - Nutrient and Carbon species submersible probes ....................................... 26
5.5 ASM – Miniaturized multi-channel algae sensing module .................................................... 27
5.6 Web based system interface ................................................................................................... 27
6 References .................................................................................................................................... 29
7 Annex 1: Regional Sea Conventions ........................................................................................... 31
8 Annex 2: Environmental monitoring programs and projects ....................................................... 32
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 5
List of symbols and acronyms
ASM Algae Sensing Module
AuNP Gold nanoparticles
ASV ASV anodic stripping voltammetry
BTEX BTEX benzene, toluene, ethylbenzene and xylene
CDOM CDOM Colored dissolved organic matter
CMEMS Copernicus Marine Service
CSM Carbon Cycle Sensing Module
EMODnet European Marine Observation and Data Network
EMSO European Multidisciplinary Seafloor and water column
Observatory
E-P-co Ethylene-propylene copolymer
EQS Environmental quality standards
FACM Fluidic activation module
GCI GEOSS Common Infrastructure
GEOSS Global Earth Observation System of Systems
GIME Gel Integrated MicroElectrode arrays
GOOS Global Ocean Observing System
GPRS General Packet Radio Service
GRA GOOS Regional Alliances
HABs Harmful algal blooms
HTTP HyperText Transfer Protocol
HW/SW HardWare/SoftWare
ICT information and communication technologies
INSPIRE INfrastructure of SPatial InfoRmation in Europe
IOC Intergovernmental Oceanographic Commission
ISE Ion selective electrode
IR-FEWS Infrared fiber-optic evanescent wave spectroscopy
JRA Joint Research Activities
JRAPs Joint Research Activity projects
LED Light emitting diode
LOD Limit of detection
MCT Mercury cadmium telluride
MSFD Marine Strategy Framework Directive
NA Networking Activities
NC Network Controller
NODCs National Oceanographic Data Centres
NSM Nutrients Sensors Module:
OEM Original Equipment Manufacturer
OGC OGC Open Geospatial Consortium
SensorML Sensor Model Language
SOS Sensor Observation Service
SOCAT Surface Ocean CO2 Atlas
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 6
STX Saxitoxin
SWE Sensor Web Enablement
TMSM Trace Metal Sensing Module:
UM Unit of measure
UMTS Universal Mobile Telecommunications System
VIP Voltammetric In Situ Profiler
VOCs-SM Volatile organic constituent sensing module
WAN Wide area network
WQS Water quality standards
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 7
1 Introduction
The world’s oceans and seas, and especially the coastal areas have a huge impact on our daily lives.
They play an integral role in the Earth's climate and weather. They are also vital to the livelihoods
and food security of billions of people around the world, and to the economic prosperity of most
countries. Globally, the market value of marine and coastal resources and industries is estimated at
$3 trillion per year. However, no economy can sustain its prosperity if the natural resource base upon
which this prosperity depends is systematically being degraded. The sustainable use of the oceans is
therefore vital for mankind.
Marine ecosystems are vulnerable and complicated regulated systems, including a large number of
physical, chemical and biological actions and reactions, which altogether ensure the functioning of
the system and its homeostasis. Correct functioning requires that all these processes are well tuned
and balanced. Pressures on the oceans related to climate change and pollution may shift natural
equilibria and block or modify the bio-chemical pathways. Therefore to understand, predict, protect
and manage ocean processes and resources requires detailed and continuous monitoring of the ocean
health.
Most monitoring approaches are still based on costly field campaign sampling followed by analysis
of the collected samples after return to the laboratory. This approach can only harvest data for a
limited time-space window, resulting in the serious issue of insufficient data resolution. Existing
recent developments involve the use of submersible in situ chemical sensor probes. They are
deployed from various facilities as part of a number of international, European and national ocean
monitoring programs. Such autonomous sensing systems allow long-term and frequent analysis.
However the commercial availability of field deployable sensors and sensing devices is still limited,
and most of these tools tend to be too large, expensive, and power-hungry, thus preventing their
widespread use.
The aim of the SCHeMA project was to contribute to enhance the capability of the Ocean
observation system networks. Toward this aim, SCHeMA developed an array of miniaturized sensors
combining various innovative analytical and technical solutions, namely: on-chip sensor arrays;
antifouling membranes; solid state ion-selective membrane electrodes; in-line desalination device;
multispectral optical sensing devices. These sensors were assembled into miniature low power
consumption probes based on advanced green and enOcean technology. The interfacing of the
individual probes, via a dedicated Network Controller, provides an open and modular sensing
solution for gathering spatial and temporal information on a range of chemicals and organisms that
may have an adverse effect on marine ecosystem functioning and health. An ad-hoc ICT wireless
networking solution, developed according to international standards, and a web-based information
system provide the necessary facilities for remote localization and configuration of the integrated
mapping systems, data transfer as well as data access and interoperability with other European and
international projects and initiatives.
This Deliverable briefly summarizes the SCHeMA state of the art developments. Analytical
performances of the chemical sensors and sensing probes and the integrated system developed are
presented, followed by the evaluation of their capabilities for environmental monitoring and water
pollution control. SCHeMA, by developing novel sensor systems for the determination of important
aspects of the oceans’ health, addresses key aspects of the Marine Strategy Framework Directive
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 8
(MSFD) and provides potentiality to extend capability of current or future monitoring systems and
programs. This is illustrated by several examples. Finally, the forecast on how the SCHeMA devices
could be industrialized and commercialized is discussed.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 9
2 SCHeMA state of the art developments
SCHeMA developed, applied and field-validated an open and modular sensing solution for in situ
high resolution mapping of a range of anthropogenic and natural chemical compounds coupled to
master bio-physicochemical parameters. SCHeMA particularly focused on the detection of toxic
and/or essential trace metal species; species relevant to the carbon cycle; nutrients; toxic algae
species; volatile organic compounds (VOCs). All of them may represent a severe threat to the normal
functioning of the marine ecosystems and may have feedback (synergic) interaction.
The sections below summarize the major SCHeMA analytical and technical developments achieved
providing individual as well as open and modular sensing solutions for the detection of the targeted
parameters.
2.1 Trace Metal Sensing Module: TMSM
The growing necessity to continuously monitor the level of trace metals reflects the critical roles they
play in ecosystem functions. Some metals (e.g. Hg, Cd, Pb) and metalloids (e.g. As) exhibit high
toxicity even at extremely low concentrations, while others are either essential or toxic (e.g. Fe, Cu,
Zn), depending on their concentrations and the nature of the organisms. Assessing the risk of metal
contaminations on ecosystem and, ultimately, human health is difficult. Trace metals are persistent
and distributed under various chemical species (speciation) (Fig.1).1 Only some specific metal
species are potentially available for biouptake (Fig.1).
Figure 1: Schematic representation of the bio-geochemical processes regulating metal cycling in the aquatic
systems1.Once they enter the ecosystem, they are involved in bio-geochemical processes and distributed under
various physical-chemical forms, including: particulate (> 0.45 m), colloidal (1 nm – 0.45 m) and
dissolved metal species ( 1 nm). The latter includes the so-called dynamic metal species, defined as the sum
of the free (hydrated)-metal ions (Mn+
) and small labile and mobile inorganic and organic complexes (ML),
that are potentially available for biouptake. Inorganic and organic colloidal/particulate materials play a key
role in coagulation, sedimentation, and adsorption processes that influence trace metal residence time and
transport from the water column to the sediments.
Bioavailability is therefore of primary concern when considering if a trace metal serves as
micronutrient or toxicant. While the global regulatory environmental quality standards (EQS) for
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 10
metals in water bodies are still mainly based on total (dissolved) concentrations, the revised Priority
Substances Directive (2013/39/EU) suggests measurement of the bioavailability of some trace metals
(Cd, Pb, Hg, Ni) either indirectly by modelling of their speciation or directly by applying specific
measurement methodology.
The TMSM is a new generation submersible multichannel voltammetric probe2 allowing direct,
simultaneous measurements of the bioavailable fraction a range of trace metals (cadmium, lead,
copper, zinc, arsenic, mercury) with sensitivity at the sub-nanomolar (ng/L) level. This is achieved
using antifouling Gel Integrated MicroElectrode arrays (GIME) interrogated by anodic stripping
voltammetry (ASV) consisting in a reduction and pre-concentration step followed by the stripping
and recording of the pre-concentrated metals.
Figure 2: a) Details of the key components of the TMSM. b) The TMSM individual probe ready for
deployment.
GIME are based on newly designed on-chip 190 interconnected iridium microdisk arrays
electrochemically plated with appropriate transducing elements and covered by an antifouling
membrane3. When a GIME sensor is interrogated using ASV, the metal flux (or current) at the GIME
during the electrochemical pre-concentration step selectively represents the dynamic metal species,
defined as the sum of free metal ions and small labile complexes; i.e. Mn+
+ ML (Fig. 1) and
corresponding to the maximum concentration of metals potentially available for bio-uptake 1,4,5
.
The entire system comprises an electronic housing, a three-channel flow-through cell and an external
multi-channel pump. Each individual channel of the flow-through cell incorporates an on-chip GIME
and counter electrode and a mini-reference electrode. The electronic housing incorporates three
potentiostats and pre-amplifiers, a 3.4V power supply as well as all required hardware and firmware
for trace metal, pressure and temperature measurements; background subtraction; automatic peak
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 11
current measurements and their conversion into concentrations; data storing; and data transmission
via wired or wireless interface. The TMSM can be used individually or interfaced with the other
SCHeMA sensing modules (see section 2.6)
2.2 Species relevant to the Carbon Cycle Sensing Module: CSM
The accurate measurement of the carbonate system in seawater is of critical importance to study
ocean acidification caused by the absorption of anthropogenically emitted CO2. As the
concentrations of the associated chemical species (CO2, pH, carbonate and bicarbonate) are
interconnected by thermodynamic constants, the carbonate system can be described from the
measurement of just any two species among the four (i.e. pH and carbonate). Additionally, the
quantification of dissolved calcium is related to the carbon cycle as it is involved in carbonate
precipitation/dissolution processes and its monitoring may contribute to a more complete description
of the marine system. Thus, CSM is based on the simultaneous potentiometric detection of pH,
carbonate and calcium in seawater using membrane electrodes.
In potentiometric sensors the analytical information is obtained through an ion recognition event
translated into a voltage signal. Thus, a local equilibrium is established at an ion-selective membrane
and the activity change of the ion analyte in the aqueous solution results in a change in membrane
potential. The potentiometric readout is the difference between this potential and that provided by a
reference electrode. CSM incorporates a flow cell (25 × 25 × 25 mm) containing three miniaturized
electrodes of all-solid-state type (2 mm of diameter and 20 mm long) based on nanomaterials and
selective membranes6 for pH, carbonate and calcium together with a reference electrode (Fig. 3a-c)
7.
The flow configuration of the detection cell allows for its implementation into a fluidics system
driven by a submersible pump and mainly based on a two-position valve to select the pass of either a
calibration solution or the seawater from the aquatic system (Fig. 3d).
Figure 3. (a) Flow cell. (b) Electrode set-up. (c)
Detection cell. (d) Fluidics design. (e) View from
outside of the CSM probe. (f) View from inside of
the CSM probe. (g) Cap to close the submersible
housing allowing the coupling between internal
and external connections. (h) SCHeMA probe. 1:
miniaturized electrode, 2: modified electrode, 3:
electrical connection, 4: fittings, 5: electronics
housing, 6: housing for the fluidics system, 7:
cap, 8: valve, 9: potentiometric flow cell, 10:
algae module, 11: pump, 12: CTD
multiparametric probe.
The flow configuration of the detection cell allows for its implementation into a fluidics system
driven by a submersible pump and mainly based on a two-position valve to select the pass of either a
calibration solution or the seawater from the aquatic system (Fig. 3d). The detection cell is placed
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 12
together with the algae module into a water- and pressure-proof cylindrical housing (Fig. 3e-g),
which is connected to the electronics part (hardware for pump and valve control, potentiometric
measurements, the adjustment of the experimental protocol, data acquisition, storage and
management). After fixing the fluidic system containing the potentiometric sensors, closing the
submersible housing and calibrating the CSM, this is incorporated into the titanium cage together
with the rest of the SCHeMA probes (Fig. 3h).
2.3 Nutrients Sensors Module: NSM
The importance of the reliable long-term monitoring of nutrients in seawater lies in their crucial role
in primary production and in their use as indicators of anthropogenic activities that disturb aquatic
ecosystems. Currently established approaches for nutrient detection involve sample extraction using
power intensive pumps, followed by analysis using expensive centralized laboratory instrumentation.
Such sampling procedures are likely to result in undesired alterations of the samples implying the
loss of useful information and therefore the concept of decentralized sensors for the in situ
monitoring of nutrients has reinforced its interest for environmentalists in the last years.
Potentiometric sensors are especially suitable for this purpose8 but it is necessary to reduce the
amount of certain major ions in seawater, i.e. chloride and hydroxide, prior to potentiometric
detection.
The developed NSM is based on the same potentiometric flow cell as in CSM but containing pH,
nitrate and nitrite membrane potentiometric sensors. NSM and CSM are interchangeable modules
sharing the same electronics. In the case of NSM, electrochemical desalination9 and passive
acidification modules10
are coupled to the detection cell (Fig. 4). Thus, the desalination module
reduces the amount of chloride in seawater down to millimolar levels and the acidification module
subsequently lowers the pH down to 5.5. In these conditions, potentiometric detection of nitrate and
nitrite in seawater is affordable with limits of detection of 0.9 µM and 0.6 µM respectively. The
incorporation of a calibration solution allows one compensating any electrode drift.
Figure 4: NSM image and fluidics design. 1: desalination unit, 2: valve, 3: acidification unit, 4:
potentiometric flow cell, 5: submersible housing.
2.4 Miniaturized, multi-channel Algae Sensing Module: ASM
Harmful algal groups, which can produce several biotoxins, are of particular interest since they can
kill fish, marine mammals and birds when they bloom. Further, algal blooms can cause green, brown
or even red colorations of the surface water wherefore these harmful algal blooms are also known
under the synonym red tides.11
After accumulation among the food web, biotoxins can also lead to
human disorders such as gastrointestinal, neurological and cardiovascular disturbances. Furthermore,
cyanobacteria, formerly known as blue-green algae, constitute another phytoplankton group of
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 13
interest. Cyanotoxins produced by this group of phytoplankton, can also lead to gastrointestinal
disorders, liver disease, heart failure or even death after accumulation over the food chain.12
In
addition to health effects, harmful algal blooms constitute also a threat to the fish industry as well as
to the tourism sector by having tremendous economic impacts.13
Due to algal contamination, food
products in the shell fish industry or even the shell fish itself gets poisoned and have to be disposed.
The tourism sector suffers heavy losses since they have to close their beaches until the nature of the
algae is determined. Moreover, the occurrence and intensity of (harmful) algal bloom has been
increased over the last few years.14
Therefore, in-situ detection and reliable identification of harmful
algae species at an early stage are of steadily growing importance.
Phytoplankton absorbs light at very specific wavelengths and re-emits part of the absorbed energy as
fluorescent light at longer wavelengths. Fluorescence can therefore be used as a selective technique
to identify relevant algal groups in an algal assemblage of mixed composition. In addition, distinct
emission windows reduce interferences from other marine compounds.
Conventional algae fluorometers compare the fluorescence emitted upon excitation at two different
wavelengths aiming at separating cyanobacteria and algae according to their major spectral
differences. However, there can be significant overlap in the spectral characteristics of different algae
making it difficult to discriminate further groups. In addition, various biological and chemical
interference, e.g. from colored dissolved organic matter (CDOM), yellow substances such as humic
matter or suspended particles in the sample can lead to alterations in the fluorescence signal and have
to be taken into account for data evaluation procedures.
To address these problems, TU Graz, as part of the SCHeMA project, has developed a miniaturized,
multi-channel detection module. This in-situ device enables the early stage detection of
phytoplankton species in algal blooms and the real-time identification of their taxonomic affiliation.
The appliance has a modular design to allow easy replacement of optical components. Although the
ASM is able to identify various algal groups, the system was optimized for reliable identification of
toxin producing cyanobacteria and dinoflagellates from among other algae in an algal assemblage of
mixed composition. In addition, the ASM is able to track the biomass concentration in order to
determine the onset and deterioration of algal blooms.
In the detection module (Fig. 5), up to eight different wavelengths are used to excite specific
pigments in the photosystems of the phytoplankton sample. Upon excitation, the energy absorbed is
rapidly transmitted throughout the light-harvesting complex of the photosystems to chlorophyll-a in
Figure 5: Rendered picture of the algae detection module (left and right) and the modular LED modules
used as excitation sources (middle). The picture on the right illustrates the arrangement of optical and
electronical components. Photodetectors are aligned with 90° angle to the excitation source and covered
with emission filters to minimize cross-talk between excitation and emission channels.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 14
the reaction centre. Part of the energy is used to maintain the photosynthesis of the algae and surplus
energy is emitted as fluorescent light. The resulting fluorescence and the contribution of certain
excitation wavelengths to the fluorescence signal are detected by the miniaturized ASM. Algorithms
are then applied to standardize and correct the fluorescence signal aiming at greater inter-
comparability within the detection system and between experiments. Subsequently, the recorded
fluorescence pattern is compared to a set of reference data and a multivariate pattern recognition
algorithm allows the identification of the taxonomic affiliation of the sample (Fig. 6).
For semi-quantification of the phytoplankton biomass, the detection unit count cell events passing
through the system and correlates the number of events with the average fluorescence intensity at
certain wavelengths. Up to a certain cell density limit, signal spikes can be resolved and the detected
spikes can be counted as cell events. This approach allows the measurement of changes in the
biomass concentration that indicate the onset and deterioration of an algal bloom.
2.5 Dissolved organic constituent sensing module: VOCs-SM
Volatile organic compounds (VOCs) are of great interest for environmental monitoring due to their
toxicity, carcinogenicity, and mutagenicity.15-16
Even at low concentrations they are harmful for the
environment, and pose a significant risk to aquatic ecosystems and human health.17
Due to the
increasing industrialization and population of coastal regions, the ocean is still – intentionally or
unintentionally - serving as dumping site for organic matter. VOCs originate from the production,
handling, and use of fuels (e.g., gasoline and diesel fuel), solvents, paints, adhesives, deodorants, and
refrigerants. Hence, VOCs are the most commonly detected organic pollutants in ground and surface
waters,16,18
especially benzene, toluene, ethylbenzene, and xylenes (o-, m-, p-) (BTEX) originating
from petroleum-based products.19
Due to their volatility, VOCs occur only in low concentrations
(i.e., ng/L range) dissolved in surface waters (e.g., lakes, reservoirs or streams). In groundwater, their
concentrations may be hundreds or thousands of times higher.20
Within the project, an optochemical mid-infrared (mid-IR) evanescent field sensor system for
detecting volatile organic compounds (VOCs) in an aqueous environment has been successfully
achieved (Fig. 7). The IR-FEWS sensor includes a compact FT-IR spectrometer, from which IR
radiation is guided via coupling optics onto the entry facet of an AgX fiber sensing element (i.e.,
transducer) acting as an internal total reflection waveguide. The AgX waveguide has a flattened
section actually transducing the absorption signatures of VOCs enriched from aqueous solution into
Figure 6: (A) Relative fluorescence intensity upon excitation at different excitation wavelengths for
amphora sp, a diatom sample. (B) Resulting score plot after applying the multivariate pattern
recognition algorithm aiming at the comparison of the unknown sample to a set of reference data.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 15
a hydrophobic polymer membrane (i.e.,
E/P-co) coated onto this sensing segment.
The analyte molecules are enriched into the
membrane, while water is effectively
excluded due to the hydrophobic nature of
the polymer.
Thereby, VOCs are enriched into the
evanescent field emanating from the
transducer surface a couple of micrometers
into the adjacent media. At the same time,
the coating acts as a protective layer for the
AgX fiber against the high ionic strength of
seawater, which cause degradation
processes. For radiation detection, the liquid
nitrogen cooled MCT detector was replaced
by a thermoelectrically cooled MCT
detector providing similar performance
characteristics. For system control and data
evaluation, an industrial computer was used.
The entire IR-FEWS sensor was miniaturized to a size of 650 x 205 x 12.7 mm3 mounted on top of
an optical breadboard.
2.6 SCHeMA integrated autonomous marine water quality observatory system
The SCHeMA submersible chemical sensor probes can
be promptly prepared and deployed from multiple
platforms. They can be deployed individually or joined
all together to create a network of interconnected
measuring unit (Fig. 8).
Interfacing of the SCHeMA network of submersible
probes is achieved via a Network Controller built on an
open HW/SW platform based on LINUX operating
system and a custom hardware, specifically developed in
the frame of the project. The Network Controller custom
electronics is developed using up-to-date technologies,
which guarantee the maximum performance allowing the
interfacing of the SCHeMA submersible chemical probes
as well as other commercially available probes (e.g. CTD
and multiparameter probes). The network control unit is
completed with a wireless WAN data transceiver (GPRS,
UMTS) and an interface compliant with EU standards
(OGC SWE, SensorML, INSPIRE) and compatible with
EU infrastructures (e.g., EMODnet, SEIS).
Figure 7: (Top) IR-FEWS sensor system, (center)
system housing, (bottom) rendered image of the
developed optical sensor concept.
Peristaltic pump
Computer
FT-IR spectrometer
Thermoelectrically
cooled MCT detector
µ-flow cell with
AgX fiber
Figure 8: (Left) TMSM and (right)
Integrated system incorporating one
TMSM, CSM, ASM and CTD.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 16
An ad-hoc ICT wireless networking solution allows remote control of data transfer and system
reconfiguration (Sensor Panning Service – SPS) according to the OGC standard (Fig. 9). The land
station provides a web-based system interface for accessing sensor information and measured sensor
observation. This system is implemented as a SOS (Sensor Observation Service) system thus
providing standard interoperability and access to measured sensor observations – through
Observation and Measurements (O&M) standard – as well as sensor descriptions – encoded in
Sensor Model Language (SensorML).
A web-based system interface for accessing, interacting and configuring the SCHeMA network,
controller and probes, was developed according to the international OGC-SWE standards
(http://dataportal.schema-ocean.eu). The Schema Web Interface interoperability is based on the
exchange of standard messages between the service and the consumer by using the HTTP protocol.
The requests are sent to the service through an HTTP POST (XML file) or an HTTP GET method
(key-value-pairs) specifying the request type and the relative permitted parameters. The service
responses are always XML file compliant with the OGC specifications.
Figure 10: SCHeMA Web User Interface
User-friendly data discovery, access and download as well as interoperability with other projects are
achieved via dedicated interface compatible with INSPIRE and GEO/GEOSS standards and
principles.
Network Controller
SENSORS
SHDP SensorML, O&MCustom XML
Land Station(SOS Interface +
Custom interface)
Predefined XML template
SCHeMA Probe
XMLBinary
CTD
TMSM
NSM
CSM
ASM
Figure 9: SCHeMA SWE diagram. The submersible mapping system is managed by the Network Controller that
handles all the communication with the CTD (Multi-parameter submersible probe), TMSM (Trace Metals
Submersible Module), CSM or NSM (Carbonate or Nutrient Sensing Module) and ASM (Algae Sensing Module).
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 17
3 Performance of the field-evaluated SCHeMA chemical probes
The SCHeMA submersible trace metal, carbon cycle species, nutrient and algae sensing probes,
deployed individually or as part of the SCHeMA autonomous marine water quality observatory
system, have been evaluated in various Atlantic and Mediterranean coastal area characterized by
contrasting conditions (see D8.4 for details). The year 2017 SCHeMA field campaigns provided also
opportunity to evaluate on-board or in an on-shore laboratory the performances of yet non-
submersible devices, namely: Au-GIME sensor and methodology for direct detection of total
inorganic arsenic (As(III) + As(V)) and determination of arsenate (As(V) by substraction of As(III);
the VOCs portable sensing module.
The performance of the SCHeMA chemical probes revealed by the field data gathered in contrasting
conditions (i.e.: highly dynamic tidal areas, complete salinity gradient, low to high turbidity) were in-
line with the analytical specifications determined from their characterization in laboratory (Table 1)
validating their capability for direct measurements in complex media.
Table 1: Current analytical performances of the SCHeMA sensors and sensing probes.
(UM: Unit of measure. LOD: Limit of detection).
The potentialities of the SCHeMA individual sensing probes as efficient tools for environmental
studies and water quality control (Table 1, last column) were assessed by intercomparison of the
Cadmium dynamic 190 GIME / ng/L (nM) 2 (0.02)
Preconc.: 10 min
0.6 (0.005)
Preconc.: 30min
a) 2-11000 (0.02-100)
b) 0.6-5000 (0.005-50)
Preconc.: a) 10 and b) 30min
300
Env. monitoring (heavily to unpolluted area) /
Sentinel/Alarm system for:
Water quality control (EQS,WQS) /
Accidental emissions and discharges
Lead dynamic 190 GIME / ng/L (nM)4 (0.02)
Preconc.: 10min
1 (0.005)
Preconc.: 30min
a) 4-21000 (0.02-100)
b) 1-11000 (0.005-50)
Preconc.: a) 10 and b) 30min
300
Env. monitoring (heavily to unpolluted area) /
Sentinel/Alarm system for:
Water quality control (EQS,WQS) /
Accidental emissions and discharges
Copper dynamic 190 GIME / ng/L (nM)15 (0.25)
Preconc. 10min
6.3 (0.1)
Preconc.: 30min
a) 15-6500 (0.25-100)
b) 6.3-3000 (0.1-50)
Preconc.: a) 10 and b) 30min
300
Env. monitoring (heavily to unpolluted area) /
Sentinel/Alarm system for:
Water quality control (EQS,WQS) /
Accidental emissions and discharges
Zinc dynamic 190 GIME / ng/L (nM) 25 (0.40)
Preconc.: 10min
1.5 (0.015)
Preconc.: 30min
a) 25-6500 (0.40-50)
b ) 1.5-3000 (0.015-50)
Preconc.: a) 10 and b) 30min
300
Env. monitoring (heavily to unpolluted area) /
Sentinel/Alarm system for:
Water quality control (EQS,WQS) /
Accidental emissions and discharges
Inorganic arsenic (III) dynamic 190 AuNP-GIME / ng/L /nM)35 (0.50)
Preconc.: 10min
15 (0.2)
Preconc. 30min
a) 35-4000 (0.5-50)
b) 15-500 (0.2-15)
Preconc.: a) 10 and b) 30min
300
Env. monitoring (heavily to unpolluted area) /
Sentinel/Alarm system for:
Water quality control /
Accidental emissions and discharges
Inorganic As(V) + As(III) dynamic single Au-GIME / ng/L (nM) 100 (1.5)
Preconc.: 10min
35 (0.5)
Preconc. 30min
a) 100-4000 (1.5-50)
b) 35-500 (0.5-15)
Preconc.: a) 10 and b) 30min
surface
Env. monitoring (heavily to unpolluted area) /
Sentinel/Alarm system for:
Water quality control (EQS,WQS) /
Accidental emissions and discharges
Inorganic mercury (II) dynamic 190 AuNP-GIME / ng/L /nM) 8 (0.04)
Preconc.: 10min
2 (0.015)
Preconc.: 30min
a) 8-10000 (0.04-100)
b) 2-4000 (0.015-20)
Preconc.: a) 10 and b) 30min
300
Env. monitoring (heavily to slightly polluted area) /
Sentinel/Alarm system for:
Water quality control (EQS,WQS) /
Accidental emissions and discharges
Sea water pH Solid state ISE / - 3 3-9 30
Carbonate Solid-state ISE / mg/L (mM) 0.6 (0.01) 0.6-6000 (0.01-100) 30
Calcium Solid-state ISE / mg/L (mM) 0.4 (0.01) 0.4- 4000 (0.01-100) 30
Nitrate Solid state ISE / µg/L (µM) 56 (0.9) 56-62000 (0.9-10000) 30
Env. monitoring (heavily to slightly polluted area) /
Sentinel/Alarm system for:
Water quality control (EQS,WQS) /
Accidental emissions and discharges
Nitrite Solid state ISE / µg/L (µM) 28 (0.6) 28-46000 (0.6-10000) 30 Env. monitoring (heavily polluted area) /
Alarm system: Accidental emissions/discharges
Benzene Optical / µg/L 18140 surface Alarm system: Accidental emissions/discharges
Xylene isomers Optical / µg/L 420 surface Alarm system: Accidental emissions/discharges
Toluene Optical / µg/L 7500 surface Alarm system: Accidental emissions/discharges
trichloroethylene Optical / µg/L 2800 surface Alarm system: Accidental emissions/discharges
1,3-dichlorobenzene Optical / µg/L 925 surface Alarm system: Accidental emissions/discharges
Tetrachloroethylene Optical / µg/L 472 surface Alarm system: Accidental emissions/discharges
1,2,4-Trichlorobenzene Optical / µg/L 808 surface Alarm system: Accidental emissions/discharges
p-cymene Optical / µg/L 1079 surface Alarm system: Accidental emissions/discharges
ASM
CSM
NSM
10 cells/LAlgae / Cyanobacteria
VOCs-SM
Optical / -
Applications
TMSM
Instrumental (Linear)
Response Range SCHeMA unit Parameter Sensor type/ UM Sensor LOD
Max. depth
/ m
30 Sentinel for harmful algal groups/bloom10 cells/L - 5.24E+9 cells/L
Sentinel for ocean acidification
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 18
performances achieved (Table 1) with the target chemical concentration ranges in open sea and
coastal area and, when available, the EU (or EU members) standards for environmental and water
quality (Table 2).
Table 2: Concentration ranges of the targeted chemicals in open sea and coastal/surface waters and EU or
European countries environmental quality standards (EQS) and water quality standards (WQS) for priority
substances.
a Depends on the ECO-REGION. b EQS refers to bioavailable concentrations of substances. Irish law in 2003. DLgs 172/15 Italy.
This evaluation revealed that:
The TMSM fulfils the performance requirements for direct detection of the target trace metals in
a concentration range covering the open sea (environmental background level concentration) to
highly polluted coastal areas by adjusting the preconcentration time. The only exception is Hg(II)
that presently is expected to be detected only in slightly to heavily polluted areas. The TMSM
has therefore great potentiality for environmental studies and water quality and pollution control.
It can be expected to be a valuable tool to allow more efficient and reliable environmental studies
on the influence of the bio-physicochemical conditions on trace metal speciation and especially
on the proportion of the metal-fraction available for bio-uptake. This is of primary concern for
trace metals that act either as toxicants (Hg(II), Cd(II), Pb(II), As(III), As(V)) or essential
micronutrients or toxicants (Cu(II), Zn(II)), depending on their concentrations, species and/or the
nature of the organisms. The TMSM has also the potentiality to serve as a real-time i) sentinel for
the tracing of diffuse or well-localized trace metal sources at extremely low levels; ii) alarm
system when the target analyte concentrations are close or above the EQS or WQS.
dissolved Cadmium 0.001-1.2 (nM) 0.005 - 25 (nM) 0.7 nM (0.08 µg/L) 1.8 nM (0.2 µg/L) 4.00 nM (0.45 µg/L) 4.00 nM (0.45 µg/L) 22nM (2.5 µg/L)
dissolved Lead 0.005-0.09 (nM) 0.03 - 200 (nM) 5.79 nM (1.2 µg/L)b 6.27 nM(1.3 µg/L) 67.57 nM(14 µg/L) 67.57 nM(14 µg/L) 120nM (25µg/L)
dissolved Copper 0.5-5 (nM) 1 - 235 (nM) 7.87 nM (0.5 µg/L) 80nM (5 µg/L)
dissolved Zinc 0.1 - 8 (nM) 0.3 - 680 (nM) 35.17 nM (2.3 µg/L) 610 nM (40µg/L)
dissolved Inorganic arsenic (III) 1 - 500 (nM) 130.00 nM
dissolved Inorganic arsenic (V) 10 nM 10 - 5000 nM
dissolved Inorganic arsenic (total) 10 nM 10 - 5000 nM 13 nM (1 µg/L) 0.07 nM (5 µg/L) 0.13 nM (10 µg/L) (25 µg/L)
dissolved Inorganic mercury (II) 0.0002-0.0015 (nM) 0.001 - 15 (nM) 0.25 nM (0.05 µg/L) 0.35 nM (0.07 µg/L) 0.35 nM (0.07 µg/L) 1.50 nM (0.3µg/L)
Sea water pH 7.8 - 8.3 7.6 - 8.4
Carbonate (surface) 0.2-0.28 (mM) 0.25 - 0.3 (mM)
Calcium 10.1-10.3 (mM) 9.8 - 12.2 (mM)
Nitrate concentration 0.01-5 (µM) 0.3 - 45 (µM) < 50 mg/L
Nitrite concentration 0.03 - 0.5 (µM)
VOCs < 0.5 ng/L
Benzene 10 (µg/L) 8 (µg/L) 50 (µg/L) 50 (µg/L) 30 (µg/L) 300 (µg/L)
Xylene isomers 5 (µg/L) 1 (µg/L) 30 (µg/L) 300 (µg/L)
Toluene 5 (µg/L) 1 (µg/L) 40 (µg/L) 400 (µg/L)
trichloroethylene 10 (µg/L) 10 (µg/L) not applicable not applicable 10 (µg/L)
1,3-dichlorobenzene 2 (µg/L) 0.5 (µg/L)
Tetrachloroethylene 10 (µg/L) 10 (µg/L) not applicable not applicable 10 (µg/L)
1,2,4-Trichlorobenzene 0.4 (µg/L) 0.4 (µg/L) not applicable not applicable 0.4 (µg/L)
Coastal /surface
water aAA-EQS (Inland
surface waters)
AA-EQS (Other
surface waters)
MAC-EQS (Inland
surface waters)Parameter Open Sea a MAC-EQS (Other
surface waters)AA-WQS MAC-WQS
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 19
The CSM fulfils the performance requirements for accurate measurement of the carbonate system
in both open seawater and coastal/surface waters and therefore has promising capability to serve
as a sentinel for ocean acidification and for studing carbonate precipitation/dissolution processes
that may be triggered by changes in the physical conditions of the media.
The NSM has demonstrated potential to serve as a sentinel for the tracking of anthropogenic
diffuse and punctual sources of nitrate and nitrite at relatively low concentrations in coastal area
and to act as an alarm system when the nitrate concentration is close or above the EU-WQS.
The ASM fulfils the performance requirements to identify and quantify, down to 10cells/L, toxin
producing cyanobacteria and dinoflagellates from among other algae in an algal assemblage of
mixed composition; and therefore has promising capability to serve as an efficient real-time
sentinel and alarm system for harmful algae groups at the very beginning of their bloom.
Moreover the ASM allows monitoring the spatial and temporal relative algal composition.
Identification of the algae are achieved due to a data base established fromcomprehensive study
of various algae species (76 algae species, 9 algae phyla) performed during the project and an in-
house software.
The portable VOC-SM developed is attractive due to its capability of simultaneous detection of a
range of VOCs. However, the remaining challenges are further improvement of the achievable
limit of detections towards the environmental limits recommended by the European Union.
Currently, the VOC-SM installed in industrial areas may serve as a real-time alarm system in
case of accidental emissions or release.
The evaluated promising capabilities of the SCHeMA individual sensing probes discussed above
were validated during the SCHeMA field campaigns (see Deliverable D8.4 for details).
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 20
4 Application for environmental monitoring directives and programs
The SCHeMA individual probes and integrated system are promising tools to address key aspects of
the Marine Strategy Framework Directive (MSFD) and to contribute to extend the capability of
ocean monitoring systems and programs.
4.1 Marine Strategy Framework Directive and Regional Sea Conventions
In 2008, the European Union has established the Marine Strategy Framework Directive (MSFD) with
a goal to protect the marine environment in Europe. The MSFD uses a set of 11 descriptors which,
together, summarize the way in which the whole system functions. Some of these descriptors can be
said to represent the most important ecosystem features of concern (D1 – Biological diversity, D2 –
Non-indigenous species (NIS), D3 – Commercial fish and shellfish, D4 – Food webs, D6 –Sea floor
integrity, D7 – Hydrological conditions) either in terms of favorable or threatened features, forming
different sectors of the ecosystem-based approach. Another part of the descriptors represents human
drivers, pressures on the ecosystems and their resulting alterations (D3 – Fishery, D5 –
Eutrophication, D8 –Contaminants, D10 – Litter, D11 – Energy and noise).
Table 3: Qualitative descriptors for determining good environmental status in the MSFD
(Directive 2008/56/EC).
The developed SCHeMA sensing probes address a number of variables relevant to several
descriptors (Table 4). Among these variables are a range of trace metals (D8) for which the
SCHeMA TMSM is presently the only available system allowing their real-time in situ detection.
Trace elements are ubiquitous and diverse components of the earth’s biogeochemistry, playing
critical roles in ecosystem functioning. Some metals (e.g. Hg, Cd, Pb) and metalloids (e.g. As) have
high toxicity even at very low concentrations, while others are either essential or toxic (e.g. Fe, Cu,
Zn), depending on their concentrations and the nature of the organisms exposed. Due to their
intrinsic properties of toxicity, persistence, and/or tendency to bio-accumulate, trace metals may
have a long-term impact on the biomass composition, activity and health, even a long time after a
significant decrease in their release. Therefore, as the nutrients (D5), they also contribute to the
achievement of D1 and D4.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 21
Table 4: Variables relevant to several descriptors of the MSFD and the monitoring programmes of the
HELCOM, OSPAR and Black Sea Regional Sea Conventions addressed by SCHeMA
The SCHeMA integrated autonomous marine water quality observatory system - interfacing the
TMSM, CSM, NSM and ASM together with a multiparameter probe - provides capabilities for
simultaneous, in situ, high-resolution monitoring of a significant number of parameters relevant to
the descriptors D1, D4, D5, D7 and D8. It appears therefore to be a very promising near future tool
to support studying, and ultimately better understanding, the synergic interaction between the
variables relevant to these descriptors.
The integration of the data of chemical monitoring programmes, and combination of data from
chemical and biological effects to define consistent sets of EQS taking account mixture effects, are
an active part of Science within the Regional Sea Conventions (i.e. OSPAR, HELCOM, Black Sea,
Barcelona Conventions). Therefore, the sensing probes suitable for in-situ and high-resolution
acquisition of a range of chemical and biological parameters (Table 4) in marine environments
(estuary, coastal and open ocean) as well as the ICT wireless networking solution and the Web data
information system developed as part of SCHeMA contribute to the availability of technological
solutions to address key aspects of these Conventions.
HELCOM OSPAR BlackSea
Cadmium dynamic fraction 8 x x x
Lead dynamic fraction 8 x x x
Copper dynamic fraction 4,8 x x x
Zinc dynamic fraction 4,8 x x x
Inorganic arsenic (III) dynamic fraction 8 x x x
Inorganic arsenic (V) dynamic fraction 8 x x x
Inorganic mercury (II) dynamic fraction 8 x x x
Sea water pH 7 x x x
Carbonate 4 x x x
Calcium 4 x x x
Nitrate concentration 4,5,7 x x x
Nitrite concentration 4,5,7 x x x
ASM Algae (Phytoplankton) / Cyanobacteria 1,4,5,7
VOCs-SM VOCs 2, 8 x
T 7
pH 7
Dissolved oxygen 4, 5, 7
Conductivity/Salinity 7
Turbidity 7
Chlorophyll a 4,5,7
Phycocyanin 4,5,7
Phycoerythrin 4,5,7
MSFD 2008/56/EC
Summarized
Descriptors
Sea Conventions
SCHeMA unit SCHeMA Parameter
Multiparameter probe
TMSM
CSM
NSM
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 22
4.2 Environmental monitoring programs
The SCHeMA submersible sensing modules (TMSM, CSM, NSM and ASM), thanks to their
technical specifications (low-power consumption, miniature multichannel sensing devices, wireless
interfaces) and analytical performances (selectivity, sensitivity, multielement analysis, high-
resolution data acquisition), together with the comprehensive ICT solution based on international
standards developed provide attractive new tools to address the objectives of a large number of on-
going environmental monitoring programs and projects as illustrated in Table 5. The aim of this table
is not to be exhaustive as there are many further initiatives (e.g. other H2020 projects) that are not
listed. The Table5 intends to show the relevance of the developed devices and tools to major
European monitoring programs and projects.
Some programs are mainly focusing on some specific parameters, therefore the individual modules
themselves are already valuable devices. Some other initiatives are looking at integrated datasets and
for those the integrated system is more pertinent.
Attractive advantages of the SCHeMA proposed solution are thereby:
the flexibility and modularity of the system that, in modules or as integrated system, can
contribute to studying ocean processes by providing high quality data for key parameters;
each of the developed SCHeMA submersible probes has the capability to monitor simultaneously
several parameters that are relevant to specific group of chemical and biological indicators while
being compact; most of the commercially available tools are restricted to the measurement of one
parameter per probe.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 23
Table 5: Variables relevant to several descriptors of the MSFD and monitoring programmes of the
HELCOM, OSPAR and Black Sea Regional Sea Conventions addressed by SCHeMA
EMODnet
Physics
EMODnet
Chemistry
EMODnet
DIngestion
Copernicus
Marine GOOS SOCAT SeaDataCloud
JERICO
Next AtlantOS Odyssea EMSO GEOSS
OGC
SWE
Cadmium dynamic fraction x x x x
Lead dynamic fraction x x x x
Copper dynamic fraction x x x x
Zinc dynamic fraction x x x x
Inorganic arsenic (III) dynamic fraction x x x x
Inorganic arsenic (V) dynamic fraction x x x x
Inorganic mercury (II) dynamic fraction x x x x
Sea water pH x x x x x x x x
Carbonate x x x x x x x x
Calcium x x x x x x
Nitrate concentration x x x x x x x
Nitrite concentration x x x x x x x
ASM Algae (Phytoplnakton) / Cyanobacteria x x x x x x x
T x x x x x x x x x x
pH x x x x x x x x x x x
Dissolved oxygen x x x x x x x x x
Conductivity/Salinity x x x x x x x x x x x
Turbidity x x x x x x x x x x
Chlorophyll a x x x x x x x x x
Phycocyanin x x x x x x x x x
Phycoerythrin x x x x x x x x x
Network controller x x x x
Data information system x x x x x x
Observation and monitoring programs Research Infrastructures and projects Interoperability
NSM
Multiparameter probe
SCHeMA unit SCHeMA Parameter
TMSM
CSM
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 24
5 Evaluation for post industrialization/commercialization
Prototypes of submersibles probes for trace metals, nutrients, species relevant to carbon cycle, and
algae have been successfully developed. A Network Controller and a Web-based system interface,
based on-up-to-date wireless data transceiver and standards, were also successfully developed. The
SCHeMA submersible individual probes and the autonomous integrated marine water quality
observatory system has been successfully field evaluated, validated and applied in Atlantic and
Mediterranean coastal areas (D8.4). There capabilities were demonstrated on-field to potential end-
users (see Deliverable D9.1). More than 20 thousand results were collected and loaded into the
SCHeMA project web data portal by means of the network controller.
The portable IR-FEWS sensor system allowing direct chemical sensing and continuous monitoring
of a range of dissolved volatile organic compounds was also evaluated on-site during the year 2017
SCHeMA field campaign.
The maturity level of the SCHeMA components and prototypes was first evaluated at month 36 to
choose the prototypes ready for the year 2017 field campaigns and on-field demonstration to end-
users. A re-evaluation was made at month 48 after the field evaluation and application in Atlantic
and Mediterranean coastal areas during the year 2017 (Table 6). The components that are the most
promising for short-term commercialization were identified (Table 6, last column).
Table 6: TRL ratings of the SCHeMA components and prototypes at month 36 and 48 and
SCHeMA units ready for short-term commercialization.
36M 48M
Cadmium dynamic fraction TRL8 TRL8
Lead dynamic fraction TRL8 TRL8
Copper dynamic fraction TRL8 TRL8
Zinc dynamic fraction TRL8 TRL8
Inorganic arsenic (III) dynamic fraction TRL3/TRL4 TRL6/7 Yes
Inorganic arsenic (V) dynamic fraction TRL1 TRL4 No
Inorganic mercury (II) dynamic fraction TRL3/TRL4 TRL6 Yes
Sea water pH TRL6 TRL6/7
Carbonate activity in water TRL6 TRL6/7
Calcium activity in water TRL6 TRL6/7
Nitrate concentration TRL5 TRL6/7
Nitrite concentration TRL5 TRL5
Phosphate concentration TRL1 TRL1
Algae / Cyanobacteria TRL6 TRL7
STX TRL3 TRL3
VOC IR-FEWS sensor system VOCs* TRL4 TRL4 No
TMSM HW/SW mechanic Trace metal submersible probe TRL8 TRL8 Yes
CSM HW/SW mechanic Carbon species submersible probe TRL7 TRL8 No
NSM HW/SW mechanic Nutrient species submersible probe TRL5 TRL7/8 No
ASM - HW/SW mechanic Algae sensing module TRL6 TRL7 No
FACM Single/double submersible peristaltic pump TRL8 TRL9 Yes
NC Network controller TRL8 TRL7/8 Yes
Web system interface Web-based system and user interfaces TRL8 TRL8 Yes
No
Yes
No
No
SC
HeM
A o
ther
com
ponents
SCHeMA unit Parameter
TM
SM
sensors
CS
M / N
SM
sensors
AS
M
dete
cto
r
LED
GIME
AuNP-GIME
Solid-state ISE
Solid-state ISE
Technology Readiness Level Commerciali
zation
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 25
The forecast on how the various devices could be industrialized and commercialized is discussed in
more detail below. These conservative forecasts and opinions have been formulated by Idronaut
(SCHeMA SME partner). IDRONAUT has been manufacturing state-of-the-art CTDs and advanced
sensors for 35 years, selling them all over the world to scientists in environmental sciences and
especially the marine research community (chemists, geochemists, biologists, oceanographers,
limnologists) studying aquatic environments. The present, extremely fluctuant market and average of
sales and declarations of interest in this kind of products that IDRONAUT has received in the last
few years from their sales network have been taken into account.
At the moment of the release of this document, the most promising project devices for
commercialization within short-term are:
The NC - Network Controller unit.
The TMSM – Fully integrated three-channel trace metals submersible probe measuring
simultaneously the potentially bioavailable Cd(II), Zn(II), Pb(II), Cu(II), As(III) and Hg(II)
fractions.
The FACM - Double and/or single submersible peristaltic pump with integrated battery pack
Web information
The other project products that we presently judge to need more important R&D investment prior to
commercialization are:
CSM - Submersible probes for in-situ simultaneous detection of species relevant to the
carbon cycle (pH, carbonate, calcium).
NSM - Submersible probes for in-situ simultaneous selective detection of nitrate and nitrite.
ASM – Fully integrated miniaturized multi-channel optical detection module enabling in-situ
early stage detection of phytoplankton species in algal blooms and the real-time identification
of their taxonomic affiliation.
5.1 NC - Network Controller
IDRONAUT presently produces and sells the BUOY CONTROLLER unit, which is the core of the
IDRONAUT BUOY 601 PROFILER system. The BUOY CONTROLLER unit has become obsolete
and in the future the SCHeMA Network Controller will replace it.
Before introducing the NC into the market, it is necessary that IDRONAUT provides the R&D
investment to rebuild the NC electronics and add the HW/SW interface for the available
IDRONAUT BUOY WINCH PROFILER. The motorized winch interface is a unique feature that
makes the NC different from the many other “data loggers” presently available on the market and
makes it indispensable to guarantee the BUOY PROFILER product continuity.
When the NC is ready for the commercialization, IDRONAUT will collaborate with ETT, which
developed the NC OGC/SWE interface and the WEB DATA PORTAL, to offer a complete and up-
to-date solution. This collaboration will guarantee the interoperability of the NC with the most
important international networks of marine monitoring, such as: EMODnet, GOOS, EuroGOOS,
Copernicus Marine Environmental Monitoring Service, and SeaDataNet network of National
Oceanographic Data Centers (now running the SeaDataCloud project).
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 26
5.2 TMSM - Three-channel trace metal sensing probe
IDRONAUT presently produces and sells the GIME-VIP (Voltammetric In Situ Profiler), a single-
channel submersible trace metal probe, to detect: Zn, Cu, Pb, and Cd in marine and fresh waters21
.
The VIP was developed in collaboration with UNIGE and IMT as part of a previous EU project
(VAMP- MAST III program, contract no. MAS3-CT95-0033). The VIP is the only system
commercially available with capacity for in situ trace metal monitoring and profiling, down to 500
m, with sub-nanomolar sensitivity.
The TMSM, based on up-to-date electronic components and highly integrated sensors is of similar
size as the VIP albeit providing three independent measuring channels. The novel and highly
integrated sensors greatly simplify the preparation and field deployment and provide new trace
metals detection capability (As (III), Hg (II) using novel AuNP-GIME).
Reliable mass production of on-chip 190 interconnected Ir-based arrays using simplified
deposition/patterning protocols has been demonstrated. The sensitivity of GIME prepared using these
novel on-chip devices is twice as high that reached previously3. The GIME-TMSM can therefore
replace advantageously the GIME-VIP.
Concerning the AuNP-GIME for direct detection of As(III) and Hg(II), R&D investment is still
required as the preparation of these sensors is far from being reproducible enough to be performed by
non-specialist end-users. Further improvement in term of sensitivity for Hg(II) detection is also
required for environmental studies.
We believe that the TMSM, when completed and fully characterized, could induce new interest
mainly in the Far East countries like China and India where the demand for trace metal analysis,
especially As(III) and Hg(II), in water is increasing. In Europe, the interest is presently scarce,
mainly because of the lack of funds for environmental monitoring. However, we believe that the
interest for the TMSM could greatly increase if i) the revised WFD Priority Substance Directive
(2013/39/EU) suggesting to monitor the bioavailable concentration of trace metals instead of their
total concentration, and ii) the MSFD (2008/56/EC) extending the requirement to monitor and define
appropriate EQS not only for the WFD priority substances but for all substances entailing a
significant risk to the health of marine environment22
are properly supported, which is the case for
the targeted trace metals.
5.3 FACM - Submersible peristaltic pump
The developed submersible double and/or single submersible peristaltic pumps with integrated
battery pack are ready for the commercialization. This is rather a new market where IDRONAUT
was not present before. Therefore, it is difficult to estimate the potentiality of this rather unique and
peculiar product. After the end of the project, IDRONAUT will start a dissemination campaign
(newsletters via email, advertising on specialized magazines) to their dealers and sales network and
will then verify the interest in this kind of product.
5.4 CSM and NSM - Nutrient and Carbon species submersible probes
Even though these devices are based on innovative all solid-state ISE and in-line desalinator and
acidification modules, they need a more important R&D investment before commercialization.
Indeed, the sensors for nutrients (nitrate and nitrite) and species relevant to the carbon cycle
(calcium, carbonate, pH) as well as desalinator and acidification modules are still hand-made
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 27
laboratory prototypes and the associated required fluidic systems are still too complex. More rugged
devices that can be readily assembled and ideally deployed without the requirement of a fluidic
housing, limiting deployment at depth > 30 m, are needed.
We believe that when such developments will be completed and the new probes fully characterized,
the CSM and NSM could show significant interest as the measurement of nutrients and CO2 are
important topics for the scientific community and environmental protection agencies all around the
world.
5.5 ASM – Miniaturized multi-channel algae sensing module
The algae detection module is at prototype stage and while it has been successfully validated in field
and in laboratory it is still far from becoming an industrial product that can be commercialized as it
is.
The system is ready for inclusion into submersible housings and can be deployed in surface water
down to ~30 m depth.
Products characterizing the algae in water, such as: i) Chelsea V-Lux; ii) Turner designs PhytoFind;
iii) Bbe-Moldaenke GMBH Fluoroprobe; etc., currently present on the market, are integrated
submersible probes that are sold as standalone probes or OEM components ready for the integration
into CTD or/and multi-parameter submersible probes. However, we think that with further R&D
investment to produce a more rugged device that can be deployed without the requirement of a
fluidic housing the ASM may be competitive due to due to its extremely miniaturized size (Fig. 5),
very low-cost components, validated algorithms to correct biological and chemical interferences, and
integrated data base. Low-cost alarm systems for the early detection of harmful algal blooms (HABs)
having important socio-economic impacts represent a huge potential market as such blooms are
occurring with increased regularity worldwide.
5.6 Web based system interface
The developed web interface relies on a very innovative and unique information system. It includes
several modules each of them providing key features (e.g. OGC SWE interoperability, interactive
data quality check and quality flagging, sensing probes planning services, sensor alarm system etc.)
that can be activate or de-activate according to the specific needs of the user. The developed
information system is highly flexible and as it interacts with the hardware by means of SOS standard,
it can also be connected to interact with any device supporting such an interface. The system was
also designed to provide access at multiple users having various right levels on the control of the
mapping modules, thereby turning the information system in a high valuable tool and at high
exploitation potential.
Besides being the ICT interface for the SCHeMA system when it is going to be sold, ETT can
already propose the SCHeMA web package on the market. Clients can be institutes owning systems
that support SOS and interested in having a complete tool to interact with their device and data, as
well as owners of devices that are interested in one specific SCHeMA web features (e.g. the Quality
Check / Quality Flag, QC/QF).
Moreover, the expertise that ETT gained by developing the SCHeMA ICT wireless networking
solution facilitated ETT being invited to participate to meetings and to collaborate to projects
adopting OGC standards. These projects are targeting remote sensing and internet data information
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 28
system solutions for a broad range of monitoring programs (environment, land, buildings,
infrastructure for transport, etc).
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 29
6 References
1. M.-L. Tercier-Waeber, S. Stoll, V. Slaveykova. Trace metal behavior in surface waters: emphasis
on dynamic speciation, sorption processes and bioavailability. Review. Archive of Science, 65,
2012, 119-142.
2. M.-L. Tercier-Waeber, F. Confalonieri, M. Fighera. Lab-on-Cable for in situ real-time
monitoring of the bioavailable fraction of a range of trace metals. Front. Mar. Sci., in prep.
3. M. Fighera, P.D. van der Wal, M.-L. Tercier-Waeber, H. Shea. New designed interconnected
microelectrode arrays and their evaluation for trace metal detection. Sensors & Actuators,
Submitted
4. J. Buffle, M.-L. Tercier-Waeber. Voltammetric environmental trace-metal analysis and
speciation: from laboratory to in situ measurements. (Review). Trends in Analytical Chemistry,
24 (2005) 172-191.
5. H. P. Van Leeuwen, R.M. Town, J. Buffle, R.F.M.J. Cleven, L. Sigg. Dynamic speciation
analysis and bioavailability of metals in aquatic systems. Env. Sci. Tech. 39 (2005) 8545-8556.
6. D. Yuan, A.H.C. A.H.C. Anthis, A. M. Ghahraman, N. Pankratova, M. Cuartero, G.A. Crespo, E.
Bakker. All-Solid-State Potentiometric Sensors with a Multiwalled Carbon Nanotube Inner
Transducing Layer for Anion Detection in Environmental Samples. Anal. Chem. 87 (2015) 8640-
8645.
7. M. Cuartero, N. Pankratova. T. Cherubini, G. Crespo, F. Massa, F. Confalonieri, E. Bakker. In
Situ Detection of Species Relevant to the Carbon Cycle in Seawater with Submersible
Potentiometric Probes. Environ. Sci. Technol. Let. 4 (2017) 410-415.
8. M. Cuartero, E. Bakker. Environmental Water Analysis with Membrane Electrodes. Curr. Opin.
Electrochem. (2017) DOI : 10.1016/j.coelec.2017.06.010
9. M. Cuartero; G.A. Crespo, E. Bakker. Tandem Electrochemical Desalination-Potentiometric
Nitrate Sensing for Seawater Analysis. Anal. Chem. 87 (2015) 8084
10. N. Pankratova, M. Cuartero, T. Cherubini, G.A. Crespo, E. Bakker. In-Line Acidification for
Potentiometric Sensing of Nitrite in Natural Waters. Anal. Chem. 89 (2017) 571
11. Harmful Algal Blooms, National Oceanic And Atmospheric Administration (NOAA), United
States Department of Commerce, 2014.
12. L. Bláha, P. Babica, B. Maršálek, Interdiscip. Toxicol. 2009, 2, DOI 10.2478/v10102-009-0006-
2.
13. P. Hoagland, D. M. Anderson, Y. Kaoru, A. W. White, Estuaries 2002, 25, 819–837.
14. G. M. Hallegraeff, Phycologia 1993, 32, 79–99.
15. L. Wang, E. Liu, Y. Cheng, D. N. Bekele, D. Lamb, Z. Chen, M. Megharaj, R. Naidu, Talanta
2015, 144, 1104–1110.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 30
16. A. D. Nikolaou, S. K. Golfinopoulos, M. N. Kostopoulou, G. a. Kolokythas, T. D. Lekkas, Water
Res. 2002, 36, 2883–2890.
17. R. Lu, W.-W. Li, B. Mizaikoff, A. Katzir, Y. Raichlin, G.-P. Sheng, H.-Q. Yu, Nat. Protoc.
2016, 11, 377–386.
18. T. Schädle, B. Pejcic, M. Myers, B. Mizaikoff, Anal. Chem. 2014, 86, 9512–9517.
19. M. Karlowatz, M. Kraft, B. Mizaikoff, Anal. Chem. 2004, 76, 2643–2648.
20. M. N. Kostopoulou, S. K. Golfinopoulos, a D. Nikolaou, N. K. Xilourgidis, T. D. Lekkas,
Chemosphere 2000, 40, 527–532.
21. M-L. Tercier-Waeber, J. Buffle, F. Confalonieri, G. Riccardi, A. Sina, F. Graziottin, G.C.
Fiaccabrino, M. Koudelka-Hep. Submersible voltammetric probes for in situ trace element
measurements in surface water, groundwater and sediment-water interface, Meas. Sci. Technol.,
10 (1999) 1202-1213.
22. V. Tomero, G. Hanke. Chemical contaminants entering the marine environment from sea-based
sorces: A review with a focus on European seas. Mar. Poll. Bul. 112 (2016) 17-38.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 31
7 Annex 1: Regional Sea Conventions
HELCOM
www.helcom.fi
HELCOM (Baltic Marine Environment Protection Commission - Helsinki Commission) is the
governing body of the Convention on the Protection of the Marine Environment of the Baltic Sea
Area, known as the Helsinki Convention. The Contracting Parties are Denmark, Estonia, the
European Union, Finland, Germany, Latvia, Lithuania, Poland, Russia and Sweden.
HELCOM was established about four decades ago to protect the marine environment of the Baltic
Sea from all sources of pollution through intergovernmental cooperation.
OSPAR
https://www.ospar.org/
OSPAR is the mechanism by which 15 Governments & the EU cooperate to protect the marine
environment of the North-East Atlantic.
OSPAR started in 1972 with the Oslo Convention against dumping and was broadened to cover land-
based sources of marine pollution and the offshore industry by the Paris Convention of 1974. These
two conventions were unified, up-dated and extended by the 1992 OSPAR Convention. The new
annex on biodiversity and ecosystems was adopted in 1998 to cover non-polluting human activities
that can adversely affect the sea.
The fifteen Governments are Belgium, Denmark, Finland, France, Germany, Iceland, Ireland,
Luxembourg, The Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
OSPAR is so named because of the original Oslo and Paris Conventions ("OS" for Oslo and "PAR"
for Paris).
Black Sea Commission
http://www.blacksea-commission.org/
Acting on the mandate of the Black Sea countries (Bulgaria, Georgia, Romania, Russian Federation,
Turkey and Ukraine) which on the 21-04-1992, signed and shortly thereafter ratified the Convention
on the Protection of the Black Sea Against Pollution, the Commission on the Protection of the Black
Sea Against Pollution (the Black Sea Commission) implements the provisions of the Convention and
the Black Sea Strategic Action Plan.
The Main Challenges are:
Combating Pollution from land-based sources and maritime transport,
Achieving sustainable management of marine living resources,
Pursuing sustainable human development.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 32
8 Annex 2: Environmental monitoring programs and projects
European Marine Observation and Data network
www.emodnet.eu
The European Marine Observation and Data Network (EMODnet) is a network of organizations
supported by the EU’s integrated maritime policy. These organizations work together to observe the
sea, process the data according to international standards and make that information freely available
as interoperable data layers and data products.
This "collect once and use many times" philosophy benefits all marine data users, including policy
makers, scientists, private industry and the public. It has been estimated that such an integrated
marine data policy will save at least one billion Euros per year, as well as opening up new
opportunities for innovation and growth.
EMODnet provides access to European marine data across seven discipline-based themes:
Bathymetry, Geology, Seabed habitats, Chemistry, Biology, Physics, Human activities. For each of
these themes, EMODnet has created a gateway to a range of data archives managed by local,
national, regional and international organizations. Through these gateways, users have access to
standardized observations, data quality indicators and processed data products, such as basin-scale
maps. These data products are free to access and use.
Among the others, three EMODnet thematic assemblies are very pertinent to SCHeMA activities and
in particular: EMODnet Chemistry, and EMODnet Physics.
EMODnet Chemistry
www.emodnet-chemistry.eu
Water chemistry data acquisition is often in the centre of routine monitoring efforts of Member
States in response to national and European legislation or regional obligations.
EMODnet Chemistry (http://www.emodnet-chemistry.eu) provides access to individual
measurements as well as a range of products such as interpolated maps of chemical variables per
region over time and graphics of station time series. Data include measurements of fertilizers,
dissolved gases, chlorophyll, silicates, pH, Organic Matter, synthetic compounds, trace metals,
hydrocarbons, radionuclides, and plastics.
EMODnet Physics
www.emodnet-physics.eu
Europe’s oceans and atmosphere are constantly measured and monitored through an extensive
network of remote, fixed and mobile in situ observing stations. The volume of data collected this
way is substantially enormous, ranging from the most fundamental information such as sea level,
atmospheric pressure, sea temperature and salinity, to more complex measurements of turbidity and
fluorescence in the water column.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 33
EMODnet Physics (http://www.emodnet-physics.eu/) provides a single gateway to near real-time
data and historical time series and datasets covering a wide range of physical conditions of the
European sea-basins monitored both by fixed and mobile observation platforms such as moorings,
drifters, gliders and ferryboxes. With high level services, features and functionalities, but not
duplicating services or adding complexity, the EMODnet Physics data portal provides near real-time
data and metadata provided by national data owners originators organized at EuroGOOS Regional
level according the ROOS’s distributed infrastructure and conventions. Achieved validated data are
made available in collaboration with the network of National Oceanographic Data Centres (NODCs)
organized under the SeaDataNet (SDN) network.
EMODnet Physics provides free and open access to all available near real time data from the latest
60 days to any user without the need for registration. Operational platforms provide data time series
as soon as data is ready; for example a fixed platform delivers data daily, and an ARGO float
delivers almost weekly.
EMODnet Data Ingestion and safe keeping
www.emodnet-ingestion.eu
The EMODnet Data Ingestion portal seeks to identify and to reach out to other potential providers in
order to make their data sets also part of the total offer. It aims at streamlining the data ingestion
process so that data holders from public and private sectors that are not yet connected to the existing
marine data management infrastructures can easily release their data for safekeeping and subsequent
distribution through EMODnet. This will enrich the total offer for all types of users and conform to
the EMODnet motto 'collect data once and use it many times'.
Copernicus Marine Environment Monitoring Service
www.cmems-marine.eu
The Copernicus Marine Service, CMEMS, offers a wide range of oceanographic products:
observation products (in situ and satellite) and numerical modelling products. These various
products, gathered in a unique catalogue, cover the global ocean and the 6 European basins: Arctic,
Baltic, North West Shelves and South West Shelves, Mediterranean Sea and Black Sea. These
products inform on physical and biogeochemical states of the oceans. They cover long temporal
periods starting from the 1990’s or near real-time for observation products and few days forecast for
modelling products.
Within the Copernicus Marine Service, the In Situ thematic centre products are organised by region
for the global ocean and the six European seas. All in situ platforms of a given region are therefore
gathered together to one same product.
In situ data in a given region are collected, quality controlled and distributed into a product that can
be NRT (assessed using automated procedures) for real time activities or reprocessed (assessed by
scientific teams) for reanalysis and research activities. The products are distributed by the
Copernicus Marine Service via an online catalogue where formats, access and information are
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 34
similar for all products. A service desk is ensuring the interface with users and supports them during
office hours with any question and request.
The Copernicus Marine Service provides an open and free service according to the service
commitments and licence. To be able to download products, a user needs first to register. He/she
then has access to any product of the catalogue.
Thanks to this registration, CMEMS has set up a user monitoring which enables statistics of the
service and a targeted communication and support to users depending of their download behaviour.
Global Ocean Observing System
http://www.goosocean.org/
GOOS is a program executed by the Intergovernmental Oceanographic Commission (IOC) of the
UNESCO, but its success relies on the coordinated contributions of several people and organizations
worldwide.
The GOOS governance model is divided in three tiers: a multinational Steering Committee to
provide oversight, scientific Expert Panels to guide system requirements, and Observation
Coordination Groups that implement global unified network execution. The GOOS Project Office
facilitates the collaboration between these different governance bodies.
GOOS Regional Alliances (GRAs) identify, enable, and develop sustained GOOS ocean monitoring
and services to meet regional and national priorities, aligning the global goals of GOOS with the
need for services and products satisfying local requirements.
The European GRA is EuroGOOS (www.eurogoos.eu)
Surface Ocean CO2 Atlas
https://www.socat.info/
The Surface Ocean CO2 Atlas (SOCAT) is a synthesis activity for quality-controlled, surface ocean
fCO2 (fugacity of carbon dioxide) observations by the international marine carbon research
community (>100 contributors).
SeaDataCloud
https://www.seadatanet.org/About-us/SeaDataCloud
SeaDataNet is a standardized infrastructure for managing the large and diverse data sets collected by
the oceanographic fleets and the automatic observation systems. The SeaDataNet infrastructure
network and enhance the currently existing infrastructures, which are the national oceanographic
data centers or data focal points of 34 countries, active in data collection. The networking of these
professional data centers, in a unique virtual data management system provide integrated data sets of
standardized quality on-line. As a research infrastructure, SeaDataNet contributes to build research
excellence in Europe.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 35
SeaDataNet connects together more than 100 data centers aiming at preserving and making re-
useable marine observations ranging from ocean physics to chemistry and biology.
SeaDataNet infrastructure was implemented during the SeaDataNet project (2006-2011), grant
agreement 026212, EU Sixth Framework Programme. The second phase, SeaDataNet 2
project (2011-2015), grant agreement 283607, EU Seventh Framework Program has upgraded the
SeaDataNet infrastructure into an operationally robust and state-of-the-art Pan-European
infrastructure for providing up-to-date and high quality access to ocean and marine metadata, data
and data products by: setting, adopting and promoting common data management standards,
realizing technical and semantic interoperability with other relevant data management systems and
initiatives on behalf of science, environmental management, policy making, and economy.
SeaDataCloud project (2016-2020), grant agreement 730960, EU H2020 program, aims at
considerably advancing SeaDataNet Services and increasing their usage, adopting cloud and High
Performance Computing technology for better performance.
JericoNEXT
http://www.jerico-ri.eu/
The coastal area is the most productive and dynamic environment of the world ocean with significant
resources and services for mankind.
JERICO-NEXT emphasizes that the complexity of the coastal ocean cannot be well understood if
interconnection between physics, biogeochemistry and biology is not guaranteed. Such integration
requires new technological developments allowing continuous monitoring of a larger set of
parameters.
In the continuity of JERICO (FP7), the objective of JERICO-NEXT consists in strengthening and
enlarging a solid and transparent European network in providing operational services for the timely,
continuous and sustainable delivery of high quality environmental data and information products
related to marine environment in European coastal seas.
In order to reach its ambitious objectives, JERICO-NEXT will concentrate the efforts on 3
coordinated activities (i.e. NA, TNA and JRA). The work flow is organized in 8 work packages plus
one dedicated to the coordination (WP9). WP1, 2, 5 and 8 are devoted to Networking Activities
(NA) with objective to federate the consortium around actions strategically important to sustain the
JERICO-RI on long term. Joint Research Activities (JRA) are including technical and
methodological developments in WP3. In addition, the Joint Research Activity projects (JRAPs) are
relevant to the 6 JERICO-NEXT thematic areas implemented in WP4. Support Actions to the
infrastructure are distributed in WP6 for Virtual Access and in WP7 for Trans National Access.
AtlantOS
https://www.atlantos-h2020.eu
AtlantOS is a BG 8 (Developing in-situ Atlantic Ocean Observations for a better management and
sustainable exploitation of the maritime resources) research and innovation project that proposes the
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 36
integration of ocean observing activities across all disciplines for the Atlantic, considering European
as well as non-European partners.
The vision of AtlantOS is to improve and innovate Atlantic observing by using the Framework of
Ocean Observing to obtain an international, more sustainable, more efficient, more integrated, and
fit-for-purpose system. Hence, the AtlantOS initiative will have a long-lasting and sustainable
contribution to the societal, economic and scientific benefit arising from this integrated approach.
This will be achieved by improving the value for money, extent, completeness, quality and ease of
access to Atlantic Ocean data required by industries, product supplying agencies, scientist and
citizens.
The overarching target of the AtlantOS initiative is to deliver an advanced framework for the
development of an integrated Atlantic Ocean Observing System that goes beyond the state-of –the-
art, and leaves a legacy of sustainability after the life of the project.
The legacy will derive from the AtlantOS aims at:
improving international collaboration in the design, implementation and benefit sharing of
ocean observing,
promoting engagement and innovation in all aspects of ocean observing,
facilitating free and open access to ocean data and information,
enabling and disseminate methods of achieving quality and authority of ocean information,
strengthening the Global Ocean Observing System (GOOS) and to sustain observing systems
that are critical for the Copernicus Marine Environment Monitoring Service and its
applications and
contributing to the aims of the Galway Statement on Atlantic Ocean Cooperation
Odyssea
http://odysseaplatform.eu/
ODYSSEA will develop, operate and demonstrate an interoperable and cost-effective platform that
fully integrates networks of observing and forecasting systems across the Mediterranean basin,
addressing both the open sea and the coastal zone.
The platform will collect its data from the many databases maintained by agencies, public
authorities, and institutions of Mediterranean EU and non-EU countries, integrating existing earth
observation facilities and networks in the Mediterranean Sea building on key initiatives such as
Copernicus, GEOSS, GOOS, EMODNet, ESFRI, Lifewatch, Med-OBIS, GBIF, AquaMaps, Marine
IBA e-atlas, MAPAMED and others with marine and maritime links. Through ODYSSEA’s end-user
centered approach, in which the various groups of end-users and stakeholders, within and external to
the Consortium, will be involved from Day 1 of the project in the design, development and operation
of the platform, including identification of gaps in data collection and accessibility.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 37
EMSO
http://www.emso-eu.org
The European Multidisciplinary Seafloor and water column Observatory (EMSO) aims at
further exploring the oceans, to gain a better understanding of phenomena happening within and
below them, and to elucidate the critical role that these phenomena play in the broader Earth systems.
EMSO is a system of observatories distributed in the European seas that provide key data and
constant monitoring of marine environments. Eleven key areas have been selected across the Arctic
Ocean, the Atlantic Ocean, the Mediterranean Sea and the Black Sea where facilities are located to
screen and study environmental processes.
EMSO’s deep-seafloor and water column observatories constantly measure different biogeochemical
and physical parameters, such as water temperature and acidity, and ground/water interactions
such as during earthquakes and tsunamis. The facilities offer scientists new opportunities to study
multiple, interrelated natural phenomena over time scales ranging from seconds to decades, from
episodic to long term processes.
Global Earth Observation System of Systems
The Global Earth Observation System of Systems (GEOSS) is composed of contributed Earth
Observation systems, ranging from systems collecting primary data, to systems concerned with the
creation and distribution of information products. Although GEOSS systems continue to operate
within their own mandates, since 2007 (GEO 2007) GEOSS system community started a process of
interconnection and harmonization of data, applications, models, and products, i.e. the development
of the GEOSS Common Infrastructure (GCI).
Within the GCI, a fundamental and common approach is to link different information systems via a
federation architecture in which different systems interoperate by means of common standards,
models, and interfaces.
Currently, to classify a system and rank its GCI compliancy four metrics are applied:
Data accessibility – this metrics tests whether a matching resource is accessible with “one
click”, meaning the returned record contains a clickable link that downloads the data (or the
map). Data accessibility is usually verified considering three features:
o The presence of “access information” in the metadata describing the resource;
o The score provided by an online service run to test the actual resource accessibility;
o The existence of a preview service;
GEOSS Social Benefit Areas Essential Variables – this metrics verifies if the system is
providing one or more of the following SBAs1:
o Climate SBA - Global Climate Observing System2;
o Biodiversity SBA - GEO BON3;
1 more can/will be added in the future
2 http://www.wmo.int/pages/prog/gcos/index.php?name¼EssentialClimateVariables.
10/11/2017 PU: Public
SCHeMA – 614002_ D10.9 38
o Water/Ocean SBA - UNESCO4 and Southern Ocean Observing System
5.
GEOSS Data Core – this metrics checks if data is full and open access;
Metadata Completeness – to verify if a matching resource is sufficiently described, thus
allowing evaluation.
Open Geospatial Consortium (OGC) standards
An Open Geospatial Consortium (OGC) standard is: “a document, established by consensus and
approved by the OGC Membership, that provides rules and guidelines, aimed at the optimum degree
of interoperability in a given context”, more specifically the OGC standards6 are developed to make
geo-enable and geo-processing technologies ready to the web and to enable geo-web based services
in various contexts (e.g. Aviation, Defence, Geoscience, Spatial data infrastructure, Sensor Webs,
etc.) ranging from local to global level”.
3 http://www.earthobservations.org/documents/cop/bi_geobon/ebvs/201303_ebv_table.pdf.
4 http://unesdoc.unesco.org/images/0021/002112/211260e.pdf
5 http://www.soos.aq/index.php/science/eovs
6 The full list of OGC standards is available at http://www.opengeospatial.org/standards