Grant Prideco 6.625_V-150

Drill-Pipe Performance Sheet

Nominal Pipe Body OD

Drill-Pipe LengthPipe Body Grade

Tool Joint

Tool Joint IDTool Joint OD

Pin TongBox Tong

Drill-Pipe Approximate Length

Nominal Pipe Body WallNominal Pipe Body Wall Thickness6.6250.522

Range26-5/8 FH

4.2508.500

1114

Tool Joint Specified Minimum Yield Strength 120,000

Drill-Pipe Configuration

Upset IEU

V-15034.02

32.01

Note: Connection torsional strength is less than 80% pipe body torsional strength.

Pipe Body Specified Minimum Yield Strength 150,000

Elevator OD 3/32 Raised

Pipe Body Minimum Ultimate Tensile Strength 160,000

(in)

(in)

(in)

(in)

(in)

(in)

(psi)

(psi)

(ft)

(in)

(psi)

Landing String Rating 1,004,70090 % Inspection Class Pipe Body,Based on:

(lbs) tool joint at recommended make-up torque, elevator OD, no applied drilling torque.

Drill-Pipe Performance

Drill-Pipe Adjusted Weight

Fluid DisplacementFluid Capacity

Drift Size

44.250.676

Fluid Capacity1.198

4.125

1.190

Note: Drill pipe assembly values are best estimates and may vary due to pipe body mill tolerance, internal plastic coating, and other factors.

0.02852 0.02833

Note: Oil field barrel equals 42 US gallons.

Best Estimates(with Coating)(without Coating)90 % Inspection Class

Performance of Drill-Pipe with Pipe Body at

Max TensionApplied Drilling Torque

56,100

54,200

Applied Make-up Torque

Drill-Pipe Length Range2

0 1,339,600

56,100 1,274,300

0 1,339,600

54,200 1,278,700

(lbs/ft)

(gal/ft)

(gal/ft)

(Bbls/ft)

(in)

(lbs)(ft-lbs)(ft-lbs)

Recommended Make-up Torque 56,100Minimum Recommended Make-up Torque 54,200

108,400 2,077,800

Tool Joint Performance 6-5/8 FH 8.500 4.250 )( X 120,000Tension at Connection Yield

Minimum Tool Joint OD for API Premium Class

1,962,400 2,077,8001,896,000 2,077,800

Tool Joint Tensile Strength

Tension at Shoulder Separation

Applied Make-up Torque

Bevel Diameter 7.703

Not Applicable

Tool Joint Torsional Strength

Tool Joint Dimensions(ft-lbs) (lbs) (lbs)

(in)

(in)

(in) (in) (psi)

Balanced OD 8.248(in)

(ft-lbs) (lbs)

Note for TurboTorque connections: Turbo Make-up Torque is an acceptable increased make-up torque if additional torque is required for drilling.

Elevator Shoulder Information

Elevator Capacity

7.031Assumed Elevator Bore Note: A raised elevator OD increases elevator capacity without affecting make-up torque.

Elevator OD 8.688

Box OD 8.500 7.7038.6881,972,800 856,100

Worn to BevelDiameter

Nominal Tool JointOD3/32 Raised

Elevator OD

2,251,500Not Applicable0

Worn to Min TJ OD forAPI Premium Class

(in)

(lbs)

(in)

(in)

Note: Elevator capacity based on assumed Elevator Bore, no wear factor, and contact stress of 110,100psi.

3/32 Raised

Pipe Body Slip Crushing Capacity

Slip Crushing Capacity

Assumed Slip LengthNote: Slip crushing calculation from Spiri Reinhold, Why Does Drill Pipe Fail in the Slip Area, World Oil 1959.Transverse Load Factor (K)

16.52.6

6.625 0.522 V-150( )Pipe Body Configuration OD Wall

90Nominal % Inspection Class API Premium Class

1,120,700 889,5001,004,700(lbs)

(in)

(in) (in)

Note: Slip manufacturer should provide Slip Length and Transverse Load Factor.

Pipe Tensile Strength 1,501,300 1,339,600 1,180,500Pipe Torsional Strength

80% Pipe Torsional StrengthBurstCollapse

204,400

163,50020,68320,057

181,900

145,50021,27416,682

159,900

127,90018,91013,197

Pipe Body Performance

TJ/PipeBody Torsional Ratio 0.680.600.53

Nominal(lbs)

(ft-lbs)

(psi)

(ft-lbs)

(psi)

90 % Inspection Class API Premium Class

Note: Nominal Burst calculated at 87.5% RBW per API.

6.625 0.522 V-150( )Pipe Body Configuration OD Wall(in) (in)

Wall ThicknessNominal Pipe ID

Cross Sectional Area of ODCross Sectional Area of IDSection ModulusPolar Section Modulus

0.5225.581

34.47224.46314.17028.340

6.5210.4705.581

33.39424.46312.61125.223

6.4160.4185.581

32.333Cross Sectional Area of Pipe Body

24.46311.08722.174

10.008 8.930 7.870

Pipe OD 6.625

(sq in)

(in)

(cubic in)

(cubic in)

(sq in)

(sq in)

(in)

(in)

Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application.

1,500,000

2,000,000

2,500,000

sion

(lbs)

Tool Joint Yield

Tool Joint Shoulder Separation

Recommended MUT

Min Recommended MUT

Tool Joint: 6‐5/8 FH (8.500 X 4.250) SMYS = 120,000 psiPipe Body: 90% Inspection Class, 6.625 inch OD, 0.522 inch wall thickness, V‐150 Pipe Grade

Torque‐Tension Graph

Pipe Body Yield at 90% Inspection Class

Pipe Body in Combined Loading

Tool Joint Applied Make‐up Torque

0

500,000

1,000,000Tens

Drilling Torque (ft‐lbs)

800,000

1,000,000

1,200,000

1,400,000

1,600,000

nsion (lb

s)

Tool Joint: 6‐5/8 FH (8.500 X 4.250) SMYS = 120,000 psi

Overload Zone

Pipe Body: 90% Inspection Class, 6.625 inch OD, 0.522 inch wall thickness, V‐150 Pipe Grade

Operational Limits (Connection at Recommended MUT = 56,100 ft‐lbs)

0

200,000

400,000

600,000

Ten


Safe Operating Zone

800,000

1,000,000

1,200,000

1,400,000

1,600,000

nsion (lb

s)

Tool Joint: 6‐5/8 FH (8.500 X 4.250) SMYS = 120,000 psi

Overload Zone

Pipe Body: 90% Inspection Class, 6.625 inch OD, 0.522 inch wall thickness, V‐150 Pipe Grade

Operational Limits (Connection at Min Recommended MUT = 54,200 ft‐lbs)

0

200,000

400,000

600,000

Ten


Safe Operating Zone

% Inspection Class90 6.625

6-5/8 FH 8.500Tool Joint

Pipe Body OD (in)Pipe Body

Tool Joint OD (in)

0.522 V-150

120,0004.250 Tool Joint Specified Minimum Yield Strength (psi)

Wall Thickness (in) Pipe Body Grade

Tool Joint ID (in)

Tension at Shoulder Separation (lbs)

Tension at Connection Yield (lbs)

Tension at Pipe Body Yield (lbs)

03,0005,9008,90011,80014,80017,70020,70023,60026,60029,50032,50035,40038,40041,30044,30047,20050,20053,10056,100

1,339,600

1,339,400

1,338,900

1,338,000

1,336,800

1,335,100

1,333,200

1,330,900

1,328,300

1,325,200

1,321,800

1,318,000

1,314,000

1,309,400

1,304,600

1,299,300

1,293,700

1,287,600

1,281,200

1,274,300

Operational drilling torque is limited by the Make-up Torque.

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

1,962,400

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

1,339,6001,339,4001,338,9001,338,0001,336,8001,335,1001,333,2001,330,9001,328,3001,325,2001,321,8001,318,0001,314,0001,309,4001,304,6001,299,3001,293,7001,287,6001,281,2001,274,300




0

2,900

5,700

8,600

11,400

14,300

17,100

20,000

22,800

25,700

28,500

31,400

34,200

37,100

39,900

42,800

45,600

48,500

51,300

54,200

1,339,600

1,339,400

1,338,900

1,338,100

1,336,900

1,335,400

1,333,600

1,331,500

1,329,000

1,326,100

1,323,000

1,319,500

1,315,700

1,311,400

1,307,000

1,302,000

1,296,800

1,291,100

1,285,200

1,278,700

Operational drilling torque is limited by the Make-up Torque.

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,896,000

1,896,000

2,077,800

2,077,800

1,339,600

1,339,400

1,338,900

1,338,100

1,336,900

1,335,400

1,333,600

1,331,500

1,329,000

1,326,100

1,323,000

1,319,500

1,315,700

1,311,400

1,307,000

1,302,000

1,296,800

1,291,100

1,285,200

1,278,700




Note: Table above left intentionally blank. Turbo MUT and performance properties only apply to Turbo Torque connections.

Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.

For Turbo Torque connections: Turbo MUT is an acceptable increased MUT if additional torque is reqired for drilling.

Note: Drill-Pipe porperties are calculated based on uniform OD and wall thickness. No safety factor applied. This performance sheet is for reference only.

1,896,000



Min MUT

Max MUT

54,200

54,400

54,600

54,800

55,000

55,300

55,500

55,700

55,900

56,100

1,903,000

1,910,000

1,917,000

1,924,000

1,934,500

1,941,500

1,948,500

1,955,500

1,962,500

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.

Make-up Torque and Max Tension Table

Tool Joint

6-5/8 FH 8.500Tool Joint Tool Joint OD (in) 120,0004.250 Tool Joint Specified Minimum Yield Strength (psi)

Tool Joint ID (in)

Combined Loading Table (Torque-Tension)

Pipe Body

0

1,339,600

16,500

1,334,100

33,100

1,317,200

49,600

1,288,800

66,200

1,247,700

82,700

1,193,200

99,200

1,122,900

115,800

1,033,100

132,300

919,500

148,800

770,700

165,400

557,800

181,900

20,000

% Inspection Class90 6.625Pipe Body OD (in)Pipe Body 0.522 V-150Wall Thickness (in) Pipe Body Grade

60,000

80,000

100,000

120,000

140,000

Torque

(ft‐lbs)

Tool Joint Wear for 6‐5/8 FH (8.500 X 4.250)

Torsional Strength

Recommended MUT

Min Recommended MUT

Material SMYS (specified minimum yield strength) = 120,000 psi

Tool Joint

0

20,000

40,000

T

Tool Joint OD (inches)

80% of Premium Pipe Body Torsional Strength

Pipe Body

Pipe Body: 6.625 inch OD, 0.522 inch wall thickness, V‐150 Pipe Grade

Recommended Make-up TorqueToolJoint OD

(in)Tension at Shoulder Separation (lbs)


Minimum Make-up Torque

Tool Joint Wear

Rec MUT (ft-lbs)

8.5

8.432

8.364

8.295

8.227

8.159

8.091

8.023

7.955

7.886

7.818

7.75

56,100

56,100

56,100

56,100

56,100

56,100

56,100

53,800

50,500

47,200

44,000

40,900

54,200

54,200

54,200

54,200

53,300

50,500

47,600

44,900

42,100

39,400

36,700

34,100

2,077,800

2,077,800

2,077,800

2,043,100

1,984,400

1,910,800

1,821,400

1,829,600

1,892,800

1,964,600

2,043,900

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800

2,077,800



Min MUT (ft-lbs)

1,962,500

2,007,900

2,057,100

2,043,100

1,984,400

1,910,800

1,821,400

1,829,600

1,892,800

1,964,600

2,043,900

2,044,700

1,896,000

1,939,900

1,987,400

2,039,800

2,061,500

2,010,800

1,955,200

1,906,800

1,853,200

1,803,900

1,752,500

1,704,700

Note for API Connections: Tension at shoulder separation and Tension at connection failure may fluctuate as OD decreases due to Recommended make-up toqure exceeding T3.

New OD

Worn OD

Turbo Make-up Torque

Torsional Strength (ft-lbs)

108,400

108,400

108,400

108,400

106,600

100,900

95,300

89,700

84,200

78,700

73,400

68,100



Turbo MUT (ft-lbs)

Note: Table above left intentionally blank. Turbo MUT and performance properties only apply to Turbo Torque connections.

Combined Loading Table (Torque-Tension)

Pipe Body

0

1,339,600

16,500

1,334,100

33,100

1,317,200

49,600

1,288,800

66,200

1,247,700

82,700

1,193,200

99,200

1,122,900

115,800

1,033,100

132,300

919,500

148,800

770,700

165,400

557,800

181,900

20,000

% Inspection Class90 6.625Pipe Body OD (in)Pipe Body 0.522 V-150Wall Thickness (in) Pipe Body Grade

ToolJoint OD

(in)

8.5

8.432

8.364

8.295

8.227

8.159

8.091

8.023

7.955

7.886

7.818

7.75

Documents

Grant Prideco 6.625_V-150