Upload
eeu-sc
View
306
Download
7
Embed Size (px)
DESCRIPTION
Gruner 227S En
Citation preview
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
Actuator with rotation drive
2.5 Nm4 Nm5 Nm8 Nm15 Nm
For the application with
Laboratory ventilation techniquesRoom ventilation techniquesVAVValves
ACTUATOR FOR DAMPERS
Quick running actuator
General overview quick running actuator, 2.5 Nm, 5 Nm, 8 Nm + 15 Nm
Actuator with digital drive
Technical Data, quick running actuator, 2.5 Nm
Technical Data, quick running actuator, 8 Nm
Technical Data, quick running actuator, 15 Nm
Technical Data, quick running actuator, 5 Nm
Technical Data, quick running actuator, 4 Nm
Specific characteristics of continuous control
Notes
Your way to Gruner
Content:
2
3
4 - 5
6 - 7
8 - 9
10 - 17
18 - 19
20
21
22
Page:
G R U N E R – t h e f r i e n d l y a l t e r n a t i v e
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
TypeTorque
Running time (90°)
Control Tri-state
On/Off
Continuous control
(0) 2...10 VDC or
(0) 4...20 mA
Power supply24 VAC/DC
230 VAC
OptionsDigital Drive
Feedback signal
GUAC Connection
Page
2.5 Nm
1 s
4
8 Nm
4 s
6
15 Nm
5 s
8
227C
S-024
-02
227C
S-024
-08
227C
S-024
-15 = Standard
= Optional
Standard version with universal locking clamp and anti torsion bow. Also available with concentric form locking for shaft ( 8 mm) and flange fixing. All actua-
tors dispose of manual override button, a mechanical limitation of the angle of rotation and setting button for the rotation direction (cw/ccw).
Actuators according to US-standards available upon demand.
TypeTorque
Running time (90°)
Control Tri-state
On/Off
Continuous control
(0) 2...10 VDC or
(0) 4...20 mA w/ 500ΩΩ
Power supply24 VAC/DC
230 VAC
OptionsDigital Drive
Potentiometer
Feedback signal
Auxiliary switch
GUAC Connection
Page
5 Nm
20...35s
10
5 Nm
20...35s
10
5 Nm
20...35s
10
5 Nm
20...35s
12
5 Nm
20...35s
12
5 Nm
20...35s
12
5 Nm
20...35s
14
5 Nm
20...35s
14
5 Nm
20...35s
14
5 Nm
20...35s
16
227S
-024
-05
227S
-024
-05-
S1
227S
-024
-05-
P5
227S
-230
-05
227S
-230
-05-
S1
227S
-230
-05-
P5
227S
-3-2
30-0
5
227S
-3-2
30-0
5-S1
227S
-3-2
30-0
5-P5
227C
S-024
-05 = Standard
= Optional
GENERAL OVERVIEW: QUICK RUNNING ACTUATORS2
227C
S-024
-04
4 Nm
5 s
18
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
ACTUATOR WITH DIGITAL DRIVE 3
The actuators with digital drive have no dip switches for setting the functions. All settings are done bythe GUIV (Windows PC or Handheld device) via PP-Bus:Available options: • direction of rotation
• increasing of running time up to 20 s• control signal Y = (0) 2...10 VDC• control signal Y = (0) 4...20 mA @ 500Ω• feedback signal U = (0) 2...10 VDC• limitation of angle of rotation 0...100% of 95°
- αMin correspond (0) 2 VDC- αMax correspond 10 VDC
• digital control via αConst as variable for angular control
BUBNBKGY
Y U/PP
PPU/
1
PPU/
2 3
Y
GUIV-S PC
3
2
3
2
5 5
AC
24V
DC
24V
-+
GYBU BKBN
PPU/
GUIV-S
PP-Bus LED's
FUNCTION LED
DATA RD
CONNECT YE
POWER GN
1 2 3
0% YU
100%
2 10
/VDC
Windows software
GUIV Connection
Angular control
Connection scheme
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-02
Applications
Technical data
To regulate dampers, valves or other regulatory
functions:
• sturdy drive
• torque 2.5 Nm
• running time 1 s
• position indication
• angle of rotation changeable from outside
• load independent
• speed regulated
• direction of rotation changeable from inside
• electromagnetic compatibility controlled
• maintenance-free
4
227CS-024-02
BUBNBKGY
Y U
Connnection scheme
(continuous control)
Control
Control signal Y (Continuous control)
Control signal Y (On/Off)
Feedback signal U
Connecting voltage
Power consumption
Transformer sizing
Angle of rotation
Direction of rotation
Running time (90°)
Torque
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
Continuous control / On/Off
0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
0 VDC (Off)
24 VAC / DC (On)
0...10 VDC or
2...10 VDC (Standard)
24 VAC (50/60 Hz) / DC±20%
18.0 W
22.0 VA
max. 95° (adjustable from outside)
changeable from inside
1 s
2.5 Nm
cable 900 mm / 0.75 mm2
III
IP 54 (cable downwards)
115 x 65 x 89 mm
-20...+50°C
maintenance-free
73/23/EWG, 89/336/EWG
750 g
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-02
Technical drawing
1 0
Ø16
Adjustment of the angle of rotation (fig. 1)1
227CS-024-02
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
ON
OFF
1 2 3 4
2
5
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
Adjustment of the functional switches (fig. 2)
Direction of rotation
clockwise (0...90°)
counter clockwise (90...0°)
Control signal Y
2...10 VDC (Standard)
0...10 VDC
4...20 mA
0...20 mA
Switches actually unused must be at position OFF. All switches are set to OFF by
factory default.
OFF ON
3 -
- 3
1, 2 -
2 1
1 2
- 1, 2
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-08
227CS-024-08
Application
Technical data
6
BUBNBKGY
Y U
Connnection scheme
(continuous control)
To regulate dampers, valves or other regulatory
functions:
• sturdy drive
• torque 4 Nm
• running time 4 s
• position indication
• angle of rotation changeable from outside
• load independent
• speed regulated
• direction of rotation changeable from inside
• electromagnetic compatibility controlled
• maintenance-free
Control
Control signal Y (Continuous control)
Control signal Y (On/Off)
Feedback signal U
Connecting voltage
Power consumption
Transformer sizing
Angle of rotation
Direction of rotation
Running time (90°)
Torque
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
Continuous control / On/Off
0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
0 VDC (Off)
24 VAC / DC (On)
0...10 VDC or
2...10 VDC (Standard)
24 VAC (50/60 Hz) / DC±20%
12.0 W
15.0 VA
max. 95° (adjustable from outside)
changeable from inside
4 s
8 Nm
cable 900 mm / 0.75 mm2
III
IP 54 (cable downwards)
115 x 65 x 89 mm
-20...+50°C
maintenance-free
73/23/EWG, 89/336/EWG
750 g
8
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-08
Technical drawing
227CS-024-08
7
1 0
Ø16
Adjustment of the angle of rotation (fig. 1)1
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
ON
OFF
1 2 3 4
2
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
Adjustment of the functional switches (fig. 2)
Direction of rotation
clockwise (0...90°)
counter clockwise (90...0°)
Control signal Y
2...10 VDC (Standard)
0...10 VDC
4...20 mA
0...20 mA
Switches actually unused must be at position OFF. All switches are set to OFF by
factory default.
OFF ON
3 -
- 3
1, 2 -
2 1
1 2
- 1, 2
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-15
8
Application
Technical data
To regulate dampers, valves or other regulatory
functions:
• Lifetime under full load
– 8 Nm more than 60,000 cycles
– 15 Nm at least 20,000 cycles
• running time 5 s
• angle of rotation changeable from outside
• load independent
• speed regulated
• direction of rotation changeable from inside
• electromagnetic compatibility controlled
• maintenance-free
227CS-024-15
BUBNBKGY
Y U
Connnection scheme
(continuous control)
Control
Control signal Y (Continuous control)
Control signal Y (On/Off)
Feedback signal U
Connecting voltage
Power consumption
Transformer sizing
Max. allowable running time per 100 s
Angle of rotation
Direction of rotation
Running time (90°)
Torque
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
Conntinuous control / On/Off
0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
0 VDC (Off)
24 VAC / DC (On)
0...10 VDC or
2...10 VDC (Standard)
24 VAC (50/60 Hz) / DC±20%
20.0 W
26.0 VA
50% ED
max. 95° (adjustable from outside)
changeable from inside
5 s
15 Nm
cable 900 mm / 0.75 mm2
III
IP 54 (cable downwards)
115 x 65 x 89 mm
-20...+50°C
maintenance-free
73/23/EWG, 89/336/EWG
750 g
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-15
9
Technical drawing
227CS-024-15
1 0
Ø16
Adjustment of the angle of rotation (fig. 1)1
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
ON
OFF
1 2 3 4
2
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
Adjustment of the functional switches (fig. 2)
Direction of rotation
clockwise (0...90°)
counter clockwise (90...0°)
Control signal Y
2...10 VDC (Standard)
0...10 VDC
4...20 mA
0...20 mA
Switches actually unused must be at position OFF. All switches are set to OFF by
factory default.
OFF ON
3 -
- 3
1, 2 -
2 1
1 2
- 1, 2
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227S-024-05, 227S-024-05-S1, 227S-024-05-P5
227S-024-05
BUBNBK
BUBNBK
227S-024-05-S1
Application
Technical data
BUBNBK
2 1 3BUBNBK
227S-024-05-P5
BUBNBK BUBNBK
2 1 3
S1
Control
Connecting voltage
Power consumption
Transformer sizing
Angle of rotation
Direction of rotation
Running time (90°)
Torque
max. 1 auxiliary switch
Schaltleistung Zusatzschalter
Rückführpoti
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
Connection scheme Connection scheme Connection scheme
To regulate dampers, valves or other regulatory
functions:
• sturdy drive
• torque 5 Nm
• load dependent running time
• position indication
• angle of rotation changeable from outside
• direction of rotation changeable from outside
• Auxiliary switch adjustable from outside
• electromagnetic compatibility controlled
• maintenance-free
10
On/Off + Tristate
24 VAC (50/60 HZ) / DC ±20%
3.5 W
6.5 VA
max. 95° (adjustable from outside)
changeable from outside
20...35 s
5 Nm
changeable from outside
250 VAC / 5 A, change-over switch
4.7 kΩ
cable 900 mm / 0.75 mm2
III
IP 54 (cable downwards)
115 x 65 x 61 mm
-20...+50°C
maintenance-free
73/23/EWG, 89/336/EWG
530 g
On/Off
Tristate PotentiometerAuxiliary switch
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227S-024-05, 227S-024-05-S1, 227S-024-05-P5
Technical drawing
1 0
M5
Ø16
Adjustment of the angle of rotation (fig. 1)1
227S-024-05
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
227S-024-05-S124VAC/ DC 50/60Hz
3,5 W
20...35 s5 Nm
IP 54
0 ,2
,4
,6
,81S2 S3 S2 S3
S1 S1
250 VAC5 (2,5) A
S1 S3S2 BU BN BK
Adjustment of the direction of rotation (fig. 2)2
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
Adjustment of the auxiliary switch (fig. 2)
The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “.2“ = 20%.
2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning
the knob to the left, i.e. “.8“ = 20%.
11
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227S-230-05, 227S-230-05-S1, 227S-230-05-P5
227S-230-05 227S-230-05-S1
Application
Technical data
BUBNBK
NL
2 1 3
227S-230-05-P5
BUBNBK
NL
2 1 3
S1
Control
Connecting voltage
Power consumption
Transformer sizing
Angle of rotation
Direction of rotation
Running time (90°)
Torque
max. 1 auxiliary switch
Schaltleistung Zusatzschalter
Rückführpoti
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
On/Off
230 VAC (50/60 HZ) ±15%
2.2 W
28.0 VA
max. 95° (adjustable from outside)
changeable from outside
20...35 s
5 Nm
changeable from outside
250 VAC / 5 A, change-over switch
4.7 kΩ
cable 900 mm / 0.75 mm2
II
IP 54 (cable downwards)
115 x 65 x 61 mm
-20...+50°C
maintenance-free
73/23/EWG, 89/336/EWG
530 g
Connection scheme
(On/Off)
Connection scheme
(On/Off)
To regulate dampers, valves or other regulatory
functions:
• sturdy drive
• torque 5 Nm
• load dependent running time
• position indication
• angle of rotation changeable from outside
• direction of rotation changeable from outside
• Auxiliary switch adjustable from outside
• electromagnetic compatibility controlled
• maintenance-free
12
BUBNBK
NL
Connection scheme
(On/Off)
Potentiometer
Auxiliaryswitch
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227S-230-05, 227S-230-05-S1, 227S-230-05-P5
Technical drawing
227S-230-05
13
1 0
M5
Ø16
Adjustment of the angle of rotation (fig. 1)1
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
227S-024-05-S124VAC/ DC 50/60Hz
3,5 W
20...35 s5 Nm
IP 54
0 ,2
,4
,6
,81S2 S3 S2 S3
S1 S1
250 VAC5 (2,5) A
S1 S3S2 BU BN BK
Adjustment of the direction of rotation (fig. 2)2
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
Adjustment of the auxiliary switch (fig. 2)
The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “.2“ = 20%.
2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning
the knob to the left, i.e. “.8“ = 20%.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227S-3-230-05, 227S-3-230-05-S1, 227S-3-230-05-P5
227S-3-230-05
BUBNBK
NL
227S-3-230-05-S1
Application
Technische Daten
2 1 3BUBNBK
NL
227S-3-230-05-P5
BUBNBK
NL
2 1 3
S1
Control
Connecting voltage
Power consumption
Transformer sizing
Angle of rotation
Direction of rotation
Running time (90°)
Torque
max. 1 auxiliary switch
Schaltleistung Zusatzschalter
Rückführpoti
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
Tristate
230 VAC (50/60 HZ) ±15%
2.2 W
28.0 VA
max. 95° (adjustable from outside)
changeable from outside
20...35 s
5 Nm
changeable from outside
250 VAC / 5 A, change-over switch
4.7 kΩ
cable 900 mm / 0.75 mm2
II
IP 54 (cable downwards)
115 x 65 x 61 mm
-20...+50°C
wartungsfrei
73/23/EWG, 89/336/EWG
530 g
Connection scheme
(Tri-state)
Connection scheme
(Tri-state)
Connection scheme
(Tri-state)
To regulate dampers, valves or other regulatory
functions:
• sturdy drive
• torque 5 Nm
• load dependent running time
• position indication
• angle of rotation changeable from outside
• direction of rotation changeable from outside
• Auxiliary switch adjustable from outside
• electromagnetic compatibility controlled
• maintenance-free
14
Potentiometer Auxiliary switch
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227S-3-230-05,227S-3-230-05-S1,227S-3-320-05-P5
Technical drawing
227S-3-230-05
15
1 0
M5
Ø16
Adjustment of the angle of rotation (fig. 1)1
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
227S-024-05-S124VAC/ DC 50/60Hz
3,5 W
20...35 s5 Nm
IP 54
0 ,2
,4
,6
,81S2 S3 S2 S3
S1 S1
250 VAC5 (2,5) A
S1 S3S2 BU BN BK
Adjustment of the direction of rotation (fig. 2)2
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
Adjustment of the auxiliary switch (fig. 2)
The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “.2“ = 20%.
2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning
the knob to the left, i.e. “.8“ = 20%.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-05
227CS-024-05
BUBNBKGY
Y U
Application
Technical data
To regulate dampers, valves or other regulatory
functions:
• sturdy drive
• torque 5 Nm
• load dependent running time
• position indication
• angle of rotation changeable from outside
• direction of rotation changeable from outside
• electromagnetic compatibility controlled
• maintenance-free
16
Connection scheme
(Continuous control)
Control
Control signal Y
Feedback signal U
Connecting voltage
Power consumption
Transformer sizing
Angle of rotation
Direction of rotation
Running time (90°)
Torque
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
Continuous control
0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
0...10 VDC or
2...10 VDC (Standard)
24 VAC (50/60 Hz) / DC ±20%
3.5 W
5.5 VA
max. 95° (adjustable from outside)
changeable from outside
20...35 s
5 Nm
cable 900 mm / 0.75 mm2
III
IP 54 (cable downwards)
115 x 65 x 61 mm
-20...+50°C
maintenance-free
73/23/EWG, 89/336/EWG
530 g
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-05
Technical drawing
1 0
M5
Ø16
1
227CS-024-05
227CS-024-05 24VAC/DC 50/60Hz
3,5 W
20...35 s5 Nm
IP 54
Y
BU BN BK GY
U
Y=2...10VDCU=2...10VDC
20% 100%
Adjustments (fig. 2)2
Angle of rotation:
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
Regulation range:
The actuators are supplied with the (0) 2...10 VDC for the regulation range 0° to 90°. A smaller angle
(proportional) can be chosen, where the regulation range (0) 2...10 VDC goes for. The actuator must be
switched off for doing so.
17
Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-04
227CS-024-04
BUBNBKGY
Y U
Application
Technical data
To regulate dampers, valves or other regulatory
functions:
• sturdy drive
• torque 4 Nm
• load dependent running time
• position indication
• angle of rotation changeable from outside
• direction of rotation changeable from outside
• electromagnetic compatibility controlled
• maintenance-free
18
Connection scheme
(Continuous control)
Control
Control signal Y
Feedback signal U
Connecting voltage
Power consumption
Transformer sizing
Angle of rotation
Direction of rotation
Running time (90°)
Torque
Connection
Safety class
Protection
Dimensions
Ambient temperature
Maintenance
CE
Weight
Continuous control
0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
0...10 VDC or
2...10 VDC (Standard)
24 VAC (50/60 Hz) / DC ±20%
12.0 W
15.0 VA
max. 95° (adjustable from outside)
changeable from outside
5 s
4 Nm
cable 900 mm / 0.75 mm2
III
IP 54 (cable downwards)
115 x 65 x 61 mm
-20...+50°C
maintenance-free
73/23/EWG, 89/336/EWG
530 g
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www.gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
227CS-024-04
Technical drawing
1 0
M5
Ø16
1
227CS-024-04
19
Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: 8...12 mm
∅ 8...16 mm
227CS-024-04 24VAC/DC 50/60Hz
12 W
5 s4 Nm
IP 54
Y
BU BN BK GY
U
Y=2...10VDCU=2...10VDC
Adjustment of the direction of rotation (fig. 2)2
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www..gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
SPECIFIC CHARACTERISTICS OF CONTINUOUS CONTROL
20
BUBNBKGY
15 VDC
Wiring configuration and recommended cable length
24VAC
24VAC
2,5 mm
1,5 mm
1 mm
0,75 mm
76 m
31 m
46 m
23 m2
2
2
2
- + +- - + - +
Y UY U
L1L2
BU BN BK GY
- +
U
I G RL <
-
L1L2
BU
+
BKBN GY
L >
GI R
AI +( )
UY YDC 0(2)...10V DC 0(2)...10V DC 0(2)...10V DC 0(2)...10V
1. Actuator stand by2. Adjusting mechanical endstops3. 15 VDC at Y4. Power on actuator5. Actuator starts teach-in process of range of angle (10...30 s)6. Remove 15 VDC at Y
Teach-in of range of angle > 30°
227CS 227CS
max
. ca
ble
leng
th
max
. ca
ble
leng
thtransformer
transformer
by the controller by the controllerby the actuator by the actuator
cable cross section max. cable length
current of set valve selector
actuator current
cable resistance
cable length
cable cross section For several actuators switched in parallel themax. cable length must be divided by the num-ber of actuators.
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www..gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
NOTES
21
GGRRUUNNEERR AAGGPF 1149, D-78560 Wehingen
Tel. (++49) 74 26 / 948 - 0Fax (++49) 74 26 / 948 - 200
http://www..gruner.deE-Mail: [email protected]
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved
YOUR WAY TO GRUNER
MünchenStuttgart
Zürich
Singen
Freudenstadt
Wehingen
Offenburg
Strasbourg
Schramberg
Karlsruhe
A81
N3N1
Basel
34
A8
B14
B27
Donaueschingen
B27
Balingen
Tutt l ingen
Spaichingen
B33A5
Rottwei l
Aldingen
Gosheim
Schömberg
DenkingenFrit t l ingen
Freiburg
B31