8th Conference on Industrial Computed Tomography

6th – 9th February 2018University of Applied Sciences Upper AustriaWels Campus

www.3dct.at/ict2018

Non-destructive Testing and 3D Materials CharacterisationDimensional MeasurementIndustry Day with Lectures for CT Users and Operators

Co-Organisers

GUIDEBOOK & PROGRAMME 2018

www.3dct.at/ict2018

Welcometo the iCT - Conference on IndustrialComputed Tomography!

Industrial X-ray computed tomography (CT) is a method whoserelevance has steadily increased because of its great advantages. CT is a non-destructive method for measuring components three-dimensionally in order to fi nd hidden features (e.g. shrink-holes, cracks, inclusions, pores, etc.) in the volume of the material and to determine physical variables like porosity and density. CT allows the inspection and measurement of hidden and inaccessible specimen characteristics, which is not possible with other techniques. Due to the increasing relevance of industrial CT, the development of methods and applica-tion areas are growing at a fast pace. Presentations of this conference will give insight into the newest developments as well as established methods.

Conference VenueUniversity of Applied Sciences Upper Austria Wels Campus (Building A)Stelzhamerstraße 23, 4600 Wels | Austria

Internet AccessAn extra sheet providing the access code for the wireless internet connection is included in the conference folder.

Registration and Information DeskThe iCT registration & infor-mation desk will be situated near the main entrance. Occupied: 06th February: 08:00 am - 06:00 pm07th-08th February: 08:00 am - 06:00 pm09th February: 08:00 am - 13:00 pm

Contact Person during the conferenceNicola Spitzer: +43 664 80484 54106

www.3dct.at/ict2018

The organisers thank the FFG, the states of Upper Austria and Styria for the fi nancial support for the „K-project for nondestructive testing and tomography+“

3

Wels Campus

Registration

Buffet

Exhibitors

Wardrobe & PCsTalks

Lunch Area

Exhibitors

Main EntranceElevator*

Elevator*

* Entrance from the underground parking of the campus

Floorplan/Roomplan ground floorUpper Austria University of Applied Science Campus Wels

Video Transmission

of Talks

Underground parking

Stairways**

* * Stairways to the fi rst fl oor

Exhi-bitors

Exhi-bitors

Floorplan/Roomplan 1st floorUpper Austria University of Applied Science Campus Wels

Coffee & Breaks

Exhibitors

Exhib

itors

Exhibitors

Poster Viewing

Room 2

Poster Viewing

Room 1

Elevator

HS110 HS111

Floorplan (Building A) 1st Floor

Floorplan (Building A)Ground Floor

www.3dct.at/ict2018

Programme OverviewTuesday 06th February 2018 Industry Day (free entry)

09:00 am Avizo Workshop by ThermoFisher01:00 pm Welcome to Industry Day & Talks by Sponsors03:15 pm Break06:00 pm Dinner & Exhibition

Wednesday 07th February 2018 Non-destructive Testing, 3D Materials Characterisation and Poster Session

08:00 am Registration08:30 am Welcome and Introduction08:40 am Keynote (I): NDT/MAT09:10 am Materials Characterisation (I)10:30 am Break11:00 am Materials Characterisation (II)12:40 pm Lunch01:40 pm NDT, Instrumentation and Manufacturing (I)03:20 pm Break03:50 pm NDT, Instrumentation and Manufacturing (II)04:50 pm Short Talks 05:40 pm Poster Exhibition, Dinner & Beer Bar

Thursday 08th February 2018 Dimensional Measurement

08:00 am Registration08:30 am Keynote (II): Metrology09:00 am Metrology (I)10:20 am Break10:50 am Metrology (II)12:30 pm Lunch01:30 pm Metrology (III) and Dual-Energy Imaging03:10 pm Break03:40 pm Keynote (III)04:10 pm Algorithms, Image Processing and Visualisation06:00 pm Bus Transfer & Conference Dinner

Friday 09th February 2018 Materials Characterisation & Special Applications

08:00 am Registration08:30 am Keynote (IV)09:00 am Reconstruction10:20 am Break10:50 am Optimisation, Spectral and Dual-Energy Imaging12:30 pm Closing and ICT2019 Preview plus Lunch

5

Industry Day Venue: University of Applied Sciences Upper Austria,

Wels Campus, Building A, AuditoriumLanguage: EnglishWorkshop: 09:00 am till 12:05 pm (incl. in conference fee, registration necessary, limited no. of participants)Sponsor Talks: 01:00 pm till 06:10 pm (free entry, registration necessary)

Talk: 10 – 15 min per sponsorRegistration: Tue 06th February 2018, open from 08:00 am

Tuesday 06th February 2018

09:00 am – 12:05 pm Thermo Scientific™ Avizo™ Software-WorkshopIntroduction to Avizo Software with Hands-on Exercises

01:00 pm – 01:05 pm Welcome

Chair: J. Kastner

Lectures of CT Device Manufacturers (by Sponsors)01:05 am diondo d2 – Next Generation Metrology CT (15 min)

Benjamin Zengerling, diondo GmbH, DE01:20 am The New Dimension of Computed Tomography – Measure-

ment of Sophisticated Workpieces Fast and Accurate with Innovative Hardware and Patented Measuring Methods (15 min)Thomas Burgstaller, Werth Messtechnik GmbH, DE

01:35 am GE Inspection Technologies: New Core Technologies Impro-ving Industrial CT Quality and Productivity Oliver Brunke, GE Sensing & Inspection Technologies GmbH, DE (15 min)

01:50 am Defect Analysis in Volume Data (15 min)Torsten Sievers, Carl Zeiss Industrielle Messtechnik GmbH, AT

02:05 am New CT Developments by Bruker microCTFrederik Coppens, Bruker microCT, BE (10 min)

02:15 am RayScan+ Modular Design for Versatile ApplicationsHarald Rein, RayScan Technologies GmbH, DE (15 min)

02:30 am Increased Effi ciency and Quality through Customized CT Solutions (10 min)Hajo Schulenburg, VisiConsult X-ray Systems & Solutions GmbH, DE

02:40 am NanoCT with RX Solutions Systems (15 min)Solène Valton, RX Solutions, FR

VisiConsult X-ray Systems & Solutions

Tuesday 06th February 2018

www.3dct.at/ict2018

02:55 am Extending the YXLON CT System Performance by Using Smart Software Features (10 min)Christopher Zepp, YXLON International GmbH, DE

03:05 am Ultra-fast CT Inspection for In-line Parts Production ControlChristophe Defrance, CyXplus, FR (10 min)

03:15 am – 03:45 am Break

Chairs: C. Gusenbauer & D. Salaberger

Lectures of Manufacturers of Components and Devices(by Sponsors)03:45 am The Future of µXCT in-situ Applications (10 min)

Gary Edwards DEBEN, UK03:55 am Supporting Industry 4.0

Jens Peter Steffen, X-RAY WorkX GmbH, DE (10 min)04:05 am Excillum MetalJet Technology (10 min)

Emil Espes, Excillum AB, SE04:15 am Hybrid-photon-counting X-ray Detectors for Imaging (10 min)

David Murer, Dectris Ltd., DE04:25 am Pixirad: unique hybrid pixel detector technology for X-ray

diffraction, scattering and imaging (10 min)Arjan Noordermeer, Malvern Panalytical GmbH, DE

04:35 am tba (10 min)Hans Radhoe, Amsterdam Scientifi c Instruments B.V.

Chairs: C. Gusenbauer & D. Salaberger

Lectures for CT Soft ware (by Sponsors)04:35 am Enabling Better Products with Industrial CT (15 min)

Sven Gondrom-Linke, Volume Graphics GmbH, DE 04:50 am New and Enhanced Features of Avizo Software – Advanced

Analysis and Automated Workfl ows (15 min)Andreas Staude, Thermo Fisher Scientifi c, Materials and Structural Analysis, DE

05:05 am Object Identifi cation on Micro - CT Scans with GeoDict Andreas Grießer, Math2Market GmbH, DE (15 min)

05:20 am Very Fast Image Processing with IPSDK Library (10 min)M. Laurent Bernard, Reactiv‘IP, FR

05:30 am CERA 5.0 for 3D Reconstruction and Visualization in Industrial CT (10 min)Frank Dennerlein, Siemens Healthineers, DE

05:40 am Digisens: CT Data to Metrology a Serpentine Road (10 min)François Curnier, Digisens SA, FR

06:50 am Statistical Iterative Reconstruction for µCT Applications Marian Willner, MITOS GmbH, DE (10 min)

06:00 pm Dinner & Exhibition

7Wednesday 07th February 2018

Conference on Industrial Computed TomographyVenue: University of Applied Sciences Upper Austria,

Wels Campus, Building A, AuditoriumLanguage: EnglishTalk: 15 min + 5 min DiscussionShort Talk: 5 minRegistration: Wed – Fri, from 07th to 09th February 2018 –

open all day from from 08:00 am

Wednesday 07th February 201808:30 am – 08:40 am Welcome and Introduction

08:40 am – 09:10 am Keynote (I) Chair: J. Kastner

>> Industrial CT at BMW - Future CT-Technology for Tomorrow’s Mobility Philipp Janello, BMW Munich, DE

09:10 am – 10:30 am Materials Characterisation (I)Chair: R. Stössel

>> Water Migration in One-Side Heated Concrete: 4D In-Situ CT Monitoring of the Moisture-Clog-EffectBartosz Powierza, BAM Federal Institute for Materials Research and Testing, DE

>> Exploring the Internal Failure Behavior of Tire Rubber Materials under Constraint Strain during Tensile Deformation via Micro Computed Tomography (μCT)Eric Euchler, Leibniz-Institute für Polymerforschung Dresden e.V., DE

>> Evaluation of Internal Defects in Additive Manufactured Metallic Network Structures by Computed Tomography Lars Pejryd, University of Örebro, SE

>> Study on the Lack of Fusion Porosity in Powder Bed Fusion Processes Stefania Cacace, Politecnico di Milano, IT

10:30 am – 11:00 am Break

www.3dct.at/ict2018

11:00 am – 12:40 pm Materials Characterisation (II)Chairs: S. Zabler & S. Senck

>> Determination of Pore Size Distribution in Tannin- and Lignin-based Foams using X-ray Microcomputed Tomography Jonathan Glinz, University of Applied Sciences Upper Austria, AT

>> Computed Tomography Inspection of Additive Manufactured Components in Aeronautic Industry Denis Kiefel, Testia GmbH, DE

>> Evaluation of Fluid Transport Characteristics in Natural Stones Using Dual Source X-Ray Radiography Petr Koudelka, Institute of Theoretical and Applied Mechanics of the CAS, v. v. i., CZ

>> 3D CT as Quality Control Tool in Advanced Composite Manufacturing Josef Valentin Ecker, Kompetenzzentrum Holz GmbH, AT

>> Synchrotron based Absorption Edge Tomography for 3D Characterization of the Microstructure of Mg-Y-Zn alloys Christian Gollwitzer, Bundesanstalt für Materialforschung und -prüfung, DE

12:40 pm – 01:40 pm Lunch

01:40 pm – 03:20 pm NDT, Instrumentation and Manufacturing (I)

Chairs: R. Kaufmann & L. Fabien

>> Rapid robotic X-ray Computed Tomography of Large Assemblies in Automotive Production Michael Krumm, RayScan Technologies GmbH, DE

>> A Fast and Continuous CT Scanner for the Optimization of Logs in a Sawmill Enrico Ursella, Microtec Srl, Dipartimento di Scienze Ambientali, Informatica e Statistica, Università Ca’ Foscari Venezia, IT

>> The PolyCT – Increasing the Sample Throughput Using Multiple Rotation Axes Nicolas Thiemeyer, xray-lab GmbH & Co. KG, DE

>> In-line CT Inspection of Butt Welds in Super Duplex Umbilical Tubes Alexandre Fouchard, CyXplus, FR

>> X-ray Sources for High Throughput and Extreme Resolutions Emil Espes, Excillum AB, SE

03:20 pm – 03:50 pm Break

© Bild: B. Plank – FH OÖ

9Wednesday 07th February 2018

03:50 pm – 04:50 pm NDT, Instrumentation and Manufacturing (II)

Chairs: W. Dewulf, S. Camignato

>> XCT discloses the Impact of Machining on Mechanical Properties of Diesel Particulate Filter Materials Giovanni Bruno, BAM Federal Institute for Materials Research and Testing, DE

>> Dose Reduction for Historical Books Digitization by 3-D X-Ray CT Daniel Stromer, Friedrich-Alexander-University Erlangen-Nuremberg, Pattern Recogniton Lab, DE

>> In-situ damage Comparison between Fabric-fabric and Fabric-UD Bonded CFRP Christian Hannesschläger, University of Applied Sciences Upper Austria, AT

04:50 pm – 05:40 pm Short Talks (5 mins)Chairs: W. Dewulf , S. Carmignato

>> X-ray imaging with Sub-micron Resolution Using Large Area Photon counting Detectors Timepix Jan Dudak, Institute of Experimental and Applied Physics, Czech Technical University in Prague, CZ

>> Metal Artefact Reduction in Spectral CT Imaging for the Tyres Inspection Nicoleta Galatanu, Université Grenoble Alpes, FR

>> Comparative Visualization of Orientation Tensors in Fiber-Reinforced Polymers Johannes Weissenböck, University of Applied Sciences Upper Austria, Wels Campus, AT

>> Three-Dimensional X-Ray Phase Imaging of Impact Damaged Carbon-Fiber-Reinforced Polymers by Using a Pinhole Array Martin Hildebrand, University of Applied Sciences and Arts Goettingen, Procon X-Ray GmbH, DE

>> Mobile CT Scanner with XRF and K-edge Imaging Capability Daniel Vavrik, Institute of Theoretical and Applied Mechanics, CAS, v. v. i., CZ

>> Computed Tomography Testing at Remains of a Glider from Otto Lilienthal Rainer Stoessel, Airbus Material X, DE

>> Robo-CT – Robot Based Computed Tomography and its Transition towards the Full Scale Car Body Wolfgang Holub, Fraunhofer Development Center X-ray Technology EZRT, DE

>> Metal Artifact Reduction by Fusion of CT-scans from Different Positions Using the Unfiltered Backprojection Gabriel Herl, Fraunhofer CTMT, Deggendorf Institute of Technology, DE

© Bild: B. Plank – FH OÖ

www.3dct.at/ict2018

>> A Dual Detector System for Propagation Phase-contrast Investigation Pablo Pérez-Vasallo, Novadep Scientifi c SL, University of Valladolid, ES

05:40 pm – 07:40 pm POSTER ExhibitionDinner & FH Upper Austrian Beer

07: 30 pm CT-Lab Tours (Registration necessary)

P-01 Multiscale Non-destructive Investigations of Aeronautic Structures: from a Single Fiber to Complex Shaped Fiber-reinforced Composites Oliver Focke, FIBRE - Faserinstitut Bremen e.V., HMI- Hybrid Materials Interfaces Group, University Bremen, DE

P-02 Cone Beam CT Correction Method Based on Intentional Misalignments in order to Achieve on Image Correctable Geometrical Errors Felix Meli, Federal Institute of Metrology METAS, CH

P-03 Evaluation of Aerosol Deposition in a Realistic Human Airway Model by X-ray Computed Tomography/Positron Emission Tomography Adam Brínek, Central European Institut of Technology Brno, University of Technology, CZ

P-04 Multi-spectral (W, Mo, Cu, and Ag) XCT Measurements Marko Katic, Faculty of mechanical engineering and naval architecture, HR

P-05 A Compact Rotational Laminography System Pablo Pérez-Vasallo, University of Valladolid, Novadep Scientifi c, SL, ES

P-06 Design of Experiments for Optimal CT Scan Settings of Plastic Components Eric Portante, BD & Co., USA

P-07 Optimization of Resistance Spot Welding in Al Alloys For Light Weight Vehicular Structures Based on Comparative Study of CT Scanning and Radiography Asif Butt, Centre of Advanced Studies in Engineering (ACES), PK

P-08 Effect of X-ray Computed Tomography Magnifi cation on Surface Morphology Investigation of Additive Manufacturing Surfaces Amir Reza Zekavat, University of Örebro, SE

P-09 An Effi cient CAD Projector for X-ray Projection Based 3D Inspection with the ASTRA Toolbox Árpád Marinovszki, imec-Vision Lab, University of Antwerp, BE

P-10 Quality Control of Friction Stir Welding with X-ray TomographyTomas Dvorak, Institute of Materials and Machine Mechanics, SK

© Bild: B. Plank – FH OÖ

11Wednesday 07th February 2018

P-11 A Flexible and Acquisition Geometry-Independent Calibration for Computed Tomography Daniel Suth, Fraunhofer EZRT, DE

P-12 X-ray-based Microstructural Analysis of Low Attenuating Biocompatible Porous Materials under Simulated Physiological Conditions Daniel Kytyr, Institute of Theoretical and Applied Mechanics, CAS, v.v.i., CZ

P-13 Machine Learning-based Single Fiber Extraction from Micro-CT Scans with GeoDict Andreas Griesser, Math2Market GmbH, DE

P-14 Inline CT for Production Monitoring Christian Kretzer, Fraunhofer EZRT, DE

P-15 Utilize CT Scanning for the Evaluation and Improvement of Additive ManufacturingAlex De Jong, BD & Co., USA

P-16 Defects Classifi cation of Additively Manufactured Titanium Artefact Using X-ray CT Ahmed Tawfi k, Huddersfi eld University, UK

P-17 A New in Situ Device for Applying Stress to Tomographic Samples Thomas Dose, Helmholtz-Zentrum Geesthacht, DE

P-18 Approach for Using CT Data in Product Development Processes Dirk Hofmann, Dresden University of Technology, DE

P-19 Simulation-based Optimization of Nano-XCT Scans for High-resolution ApplicationsChristian Gusenbauer, University of Applied Sciences Upper Austria, AT

P-20 Multiscale Analysis of Cellular Polymers Saúl Pérez-Tamarit, CellMat Laboratory, University of Valladolid, ES

P-21 Determination of Solid Phase Corrugation Ratio of Polymeric Foams Saúl Pérez-Tamarit, CellMat Laboratory, University of Valladolid, ES

P-22 Sensitivity of CT Dimensional Measurements to Rotary Stage ErrorsMassimiliano Ferrucci, KU Leuven, BE

P-23 Evaluation Method to Determine the Focal Spot Size of a CT System with a New Designed Resolution Test-chart Markus Baier, University of Padua, IT

P-24 Using Monte Carlo Method to Model Image Formation of Computed Radiography Imaging Plates in Industrial RadiographyEhsan Nazemi, Nuclear Science and Technology Research Institute, IR

P-25 Metrology for Additively Manufactured Medical Implants: The MetAMMI projectFabien Léonard, BAM Federal Institute for Materials Research and Testing, DE

© Bild: B. Plank – FH OÖ

www.3dct.at/ict2018

P-26 A Study on the Guided Wave Tomographic Imaging for Defects on a Long Distance Bend Pipes Junpil Park, Pusan National University, KR

P-27 Electrospun Fibre Orientation Analysis Based on CT Data Rolf Kaufmann, Empa, Swiss Federal Laboratories for Materials Science and Technology, CH

L-01 Neutron Tomography: Examples of Industrial Applications on the Micro and Macro Scale Eberhard Lehmann, PSI, CH

L-02 An Improved FDK Algorithm for Reconstruction of Misaligned Cone-Beam CT System Emre Topal, Dresden Center for Nanoanalysis (DCN), TU Dresden, DE

L-03 Lifetime assessment of casted aluminium components based on CT-evaluated microstructural defects Aigner Roman Alois, Montanuniversität Leoben, AT

L-04 Development of an Innovative Microfocus X-ray Source for Industrial application Masayuki (Max) Hirano, Hamamatsu Photonics K.K., DE

L-05 Correction for detector response in spectral reconstruction Ulrik Lund Olsen, DTU Physics, Technical University of Denmark, DK

L-06 Application of the computed tomography for surface topography examination Bartosz Gapinski, Poznan University of Technology, PL

L-07 Using Monte Carlo Method to Model Image Formation of Com-puted Radiography Imaging Plates in Industrial Radiography Ehsan Nazemi, Nuclear Science and Technology Research Institute, IR

L-08 In-Situ CT on Additivly Manufactured IN625 Lattice Structures under Compression Tobias Thiede, Bundesanstalt für Materialforschung und -prüfung, DE

L-09 A New Approach of Discrete Tomographic Reconstruction on Limited Angle Situation Jianhong Liu, National Synchrotron Radiation Laboratory, University of Science and Technology of China, P.R.China

L-10 Imaging Mean X-ray-energy of Polychromatic X-rays through Intensity Variation in Radiographs Andrew Kingston, Research School of Physics and Engineering, The Australian National University, AU

L-11 A Novel Device for Flexural Testing of Materials During 4D Com-puted Tomography Tomas Fila, Institute of Theoretical and Applied Mechanics, CAS Prague, CZ

L-12 Com3d-XCT: Competence Center for High-Resolution 3D X-ray Imaging Sascha Senck, University of Applied Sciences Upper Austria, AT

13Thursday 08th February 2018

Thursday 08th February 201808:30 am – 09:00 am Keynote (II)Chairs: M. Bartscher, L. De Chiffre

>> Advancements and Challenges of X-ray CT for Manufacturing Metrology Simone Carmignato, University of Padova, IT

09:00 am – 10:20 am Metrology (I)Chairs: M. Bartscher, L. De Chiffre

>> New Method to Evaluate the Accuracy of CT Surface Topography Measurements of Additively Manufactured Metal Parts Filippo Zanini, Department of Management and Engineering, University of Padova, IT

>> Case Study of Empirical Beam Hardening Correction Methods for Dimensional X-ray Computed Tomography Using a Dedicated Multi-material Reference Standard Michael Reiter, University of Applied Sciences Upper Austria, AT

>> Form Estimation for X-ray Computed Tomography Measurement Luca Pagani, University of Huddersfield, UK

>> Determining Spectrum-dependent Source and Detector Positions in Cone-beam CT Jens Illemann, Physikalisch-Technische Bundesanstalt, DE

10:20 am – 10:50 am Break

10:50 am – 12:30 pm Metrology (II)Chairs: S. Kasperl, M. Reiter

>> Verifying the Measurement Accuracy for Multiple-scan X-ray Cone-beam CT Measurements Daniel Weiß, Carl Zeiss Industrielle Messtechnik GmbH, DE

>> Voxel Dataset Noise Reduction Algorithm Based on CMM Reference Measurements for Geometrical Tolerance Analysis of Prismatic Test Pieces Crhistian Raffaelo Baldo, Federal University of ABC - UFABC, BR

>> Examination of a Method for the Optimization of Scan Parameters for Measuring with Computed Tomography Raoul Christoph, Technische Universität Dresden, DE

>> CT Measurement of Re-entrant Additively Manufactured Surfaces Andrew Townsend, The University of Huddersfield, UK

>> A Geometry Measurement System for a Dimensional Cone Beam CT Benjamin A. Bircher, Federal Institute of Metrology METAS, Laboratory for Length, Nano- and Microtechnology, CH

© Bilder: B. Plank – FH OÖ

www.3dct.at/ict2018

12:30 pm – 01:30 pm Lunch

01:30 pm – 03:10 pm Metrology (III) and Dual-Energy Imaging

Chairs: L. Pejryd, J. Sijbers

>> On Gauge Orientation for the Qualification of Industrial Computed Tomography Dierck Matern, YXLON International GmbH, DE

>> Simulation-based Correction of Systematic Errors for CT Measurements Andreas Michael Müller, Friedrich-Alexander-Universität Erlangen-Nürnberg, DE

>> Influence of Surface Roughness on Measurement Uncertainty in Computed Tomography Leonard Schild, Karlsruhe Institute of Technology (KIT), DE

>> Reading Closed Historical Manuscripts using Dual-source Dual-energy X-Ray Tomography Ivana Kumpova, The Institute of Theoretical and Applied Mechanics AS CR, v. v. i., CZ

>> Dual-energy computed tomography of historical musical instruments made of multiple materials Rebecca Wagner, Fraunhofer Institute for Integrated Circuits (IIS), DE

03:10 pm – 03:40 pm Break

03:40 pm – 04:10 pm Keynote (III)Chairs: E. Gröller, D. Vavrik

>> Image Processing and Visualization of Industrial CT Data Christoph Heinzl, University of Applied Sciences Upper Austria, AT

04:10 pm – 05:30 pm Algorithms, Image Processing and Visualisation

Chairs: E. Gröller , D. Vavrik

>> Deep Scatter Estimation (DSE): Accurate Real-Time Scatter Estimation for X-Ray CT using a Deep Convolutional Neural Network Joscha Maier, German Cancer Research Center (DKFZ), DE

>> A New Calibration-free Beam Hardening Reduction Method for Industrial CT Tobias Würfl, Pattern Recognition Lab, Friedrich-Alexander- Universität Erlangen-Nürnberg, DE

15Thursday 08th February 2018

>> Detection of Narrow Gaps Using Hessian Eigenvalues for Shape Segmentation on CT Volume of Assembled Parts Yukie Nagai, The University of Tokyo, JP

>> Fully Convolutional Deep Network Architectures for Automatic Short Glass Fiber Semantic Segmentation from CT Scans Tomasz Konopczynski, Heidelberg University, Volume Graphics GmbH, Heidelberg, DE; University of Padova, Vicenza, IT

05:30 pm – 06:00 pm Break

06:00 pm – 11:00 pm Bus Transfer & Conference Dinner

© Foto: B. Plank – FH OÖ

www.3dct.at/ict2018

Friday 09th February 201808:30 am – 09:00 am Keynote (IV)Chairs: M. Kachelries, S. Senck

>> Phase Contrast and Darkfield Computed Tomography for the Characterization and Inspection of Composite Materials Simon Zabler, Fraunhofer-Entwicklungszentrum Röntgentechnik EZRT, DE

09:00 am – 10:20 am ReconstructionChairs: M. Kachelries, S. Senck

>> Performance and Memory Use Trade-off in CPU and GPU Implementations of a Deformation Operator for 4D-CT Stijn Manhaeve, University of Antwerp, BE

>> Adapted Acquisition Trajectory and Iterative Reconstruction for Few-views CT Inspection Caroline Vienne, CEA List, FR

>> Efficient Data Structures for the Fast 3D Reconstruction of Voxel Volumes with Inhomogeneous Spatial Resolution Benjamin Betz, University of Stuttgart - Institute of Parallel and Distributed Systems, DE

>> Parametric Reconstruction of Advanced Glass Fiber-reinforced Polymer Composites from X-ray Images Tim Elberfeld, imec-VisionLab, University of Antwerp, BE

10:20 am – 10:50 am Break

10:50 am – 12:30 pm Optimisation, Spectral and Dual-Energy Imaging

Chairs: C. Heinzl, J.Kastner

>> Image Domain Local Joint Sparse Material Decomposition in Spectral CT Bingqing Xie, Univ Lyon, INSA Lyon, Laboratoire CREATIS, FR

>> Simulation Based Study on the Influence of Deviations between the Assumed and Actual X-ray Spectra on the Performance of the Alvarez Dual-energy Method for Beam-hardening Correction Wenchao Cao, X-Tek Systems Ltd (Nikon Metrology UK Ltd), UK

>> Optimization of the X-ray Tube Voltage with Respect to the Dynamical Resolution in Radiography and Tomography Michal Vopalensky, Institute of Theoretical and Applied Mechanics, The Czech Academy of Sciences, Centre of Excellence Telc, CZ

© Fotos: B. Plank – FH OÖ

17

>> Spectroscopic X-ray Radiography and Tomography Based Modular Pixelated Detectors Salman Hasn, Technical University in Prague, CZ

>> Low Energy Computed Tomography on a Multipurpose Diffractometer Detlev Johannes Götz, PANalytical B.V., NL

12:30 pm –12:40 pm Closing & iCT 2019 Preview

12:40 pm End of Conference and Lunch

9th iCT Conference 201913th – 15th February

Padova | Italy

10th iCT Conference 2020February 2020

Wels | Austria

ANNOUNCEMENT

Friday 09th February 2018

www.3dct.at/ict2018

Social ProgrammeDinner and ExibitionTuesday, 06th February 2018, 06:10 pmThe University of Applied Sciences Upper Austria invites you to visit the sponsor exhibition and check out the new developments in CT-components, -devices and -software at the Wels Campus. The exhibition is accompanied by a tasty dinner which you may enjoy with the University‘s own beer inventions and interesting conversation with sponsors and guests alike.

Dinner and Poster ViewingWednesday, 07th February 2018, 05:40 pmExcellent food awaits you during the poster viewing session, which we invite you to enjoy with us. The evening will be accompanied by good live music and some more of the University‘s own beer inventions – a perfect atmosphere for networking and meeting new people in the fi eld of industrial computed tomography at Wels Campus.

Conference Dinner in the RedoutensaalThursday, 08th February 2018, 06:00 pmThe Conference Dinner will be held in the eye-catching ball room „Redoutensaal“ in the city centre of Linz. Before enjoying a delicious

© Bilder: B. Plank – FH OÖ

© Bild: Nicola Spitzer – FH OÖ

Klammstraße

Conference Dinner

Entrance

Wal

degg

stra

ße

Promenade

dinner you will be given a per-formance of the famous imitation of the Austrian singer, songwriter and rapper Falco: „The Falco Original-Double Show“. We hope you will be as ta-ken by the artist’s work as many people were by the real Falco.>> A bus shuttle will take you from Wels Campus to the conference dinner and back.

ADDRESS:Promenade 39, 4020 Linz

19

AccommodationA Hotel Bayrischer Hof *** & Hotel Alexandra ****

Doktor-Schauer-Strasse 21-23 | 4600 Wels, AustriaB Hotel Greif

Kaiser-Josef-Platz 50-51 | 4600 Wels, AustriaC Hotel Best Western Ploberger GmbH

Kaiser-Josef-Platz 21 | 4600 Wels, AustriaD Hotel Kremsmünstererhof

Stadtplatz 62-63 | 4600 Wels, AustriaF Boutique Hotel Hauser

Bäckergasse 7 | 4600 Wels, Austria

Railway Station

B

C

D

FH Upper

Austria

A

F

© F

oto:

B. P

lank

– F

H O

Ö

www.3dct.at/ict2018

Useful InformationCurrency and BankingThe official currency of Austria is Euro (EUR, €). Therewith, Austria belongs to the 19 European countries that use the common European money. Banks are located in the surrounding of the congress area. Opening hours (depends on the Bank): >> Monday-Friday: 09:00 am - 12:00, 02:00 pm - 03:00 pm>> Saturday and Sundays: closed

ATMYou may find ATMs within a bank or right outside of the bank buil-ding. Entering a bank during closing hours is usually possible with bank cards with a chip. In order to find an ATM see the sign under-neath. ATMs closest to the cogress area:>> Wels Campus, Outside Entrance Building A>> Volksbank Wels, Pfarrgasse 5>> Raiffeisenbank Wels, Kaiser-Josef-Platz 58

Power and Electrical PlugsElectricity is 220-230V, 50 Hz. – Austrian plugs have two round pins.

Calling Codes >> Austria country code : +43 (or 00 43) >> Wels: +43 (0)7242

Emergency Numbers>> European Emergency Number 112>> Austrian Police Department 133>> Austrian Ambulance 144>> Austrian Fire Department 122

Climate and ClothingAustria gets very cold in the winter with temperatures sometimes dropping below -10˚C, so we recommend that you bring warm clothes and shoes with good sturdy soles.

Store Opening HoursThe opening hours of shops vary in Austria. Mostly though, the opening hours during the week are Monday – Friday, from 09:00 am - 06:00 pm and on Saturday, they are open until 01:00 pm or 05:00 pm.

21

PosterFind the number of your poster in the programme and pin your poster on the pinwall in the poster viewing room on the first floor.

Smoking areaNo smoking in public buildings (e.g. airports, train stations, schools, universities, government administration buildings) and on public transport (e.g. trains). At the conference venue you may smoke in the inner courtyard of the Wels Campus. In general smoking is allowed in restaurants, bars and cafes, if there are seperated smoking and non-smoking areas.

Pharmacies in WelsSTERNapotheke: www.sternapotheke.at>> Bahnhofstraße 11 | Phone: +43 (0)7242 46711>> Open: Mon-Fri: 8:30 am to 06:00 pm, Sat 8:30 am to 12:30Einhorn-Apotheke: www.einhorn-apotheke.at>> Plobergerstraße 7 | Phone: +43 (0)7242 464880>> Open: Mon-Fri 8:30 am to 06:00 pm, Sat 8:30 am to 12:00

Attractions in WelsShould you be intersted in seeing touristic sights please visit the following websites for more information: www.wels.at

ParkingUnderground parking of FH Campus Wels is possible but limited. For the Wels Campus underground parking there are free parking-exit-tickets available at the registration desk.Further parking with costs is available in the Traunpark garage or at underground parking Kaiser-Josef-Platz (see back-side).

Public BusWels has a tight bus route network. Intersection of all bus routes is the traffic island at the Kaiser-Joseph-Platz. For more information on bus schedules see www.liniewels.at/de/stadtlinien and +43 (0)7242 / 44 212.

Cabs>> City Taxi Wels: +43 (0)7242 / 911 811 >> Funktaxi Wels: +43 (0) 7242 / 234>> Hailed shared taxi: +43 (0)7242 / 20 69 69

9th iCT Conference 2019

13th - 15th Febrary Padova, Italy

www.ict2019.org

10th iCT Conference 2020

February 2020Wels, Austria

NEXT iCT CONFERENCES

ANNOUNCEMENT

HAGENBERG | LINZ | STEYR | WELS

University of Applied Sciences Upper AustriaSchool of Engineering

Stelzhamerstraße 234600 Wels | AustriaPhone: +43 5 0804 54106Fax: +43 5 0804 954106congress@fh-ooe.atwww.3dct.at/ict2018www.fh-ooe.at

/fhooe.at

PassauEXITWels NORD

Towards WelsEXITWels OST

Towards Linz

car parkKaiser-

JosefPlatz

Towards SattledtSalzburg/Wien/Graz

car parkTraunpark

FH OÖWels Campus

Stelzhamerstr.

Ad

lerstr.R

oseggerstr.

Dr.-S

chauer-Str.

Magazinstr.

Hans-Sachs-Str.

Herrenstr.

Ringstr.

Roseggerstr.

Linzer Straße

RAILWAYSTATION

CITY

Railway station

BUSstation

Villach

Innsbruck

Graz

Salzburg

Hagenberg

EnnsVIENNA

Steyr

Linz

© B

. Pla

nk -

FH

OÖ