Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
GUJARAT TECHNOLOGICAL UNIVERSITY Shantilal Shah Engineering College, Bhavnagar
Production Engineering Department 7th Production Engineering - Lesson Planning Subject: Operation Research (New Syllabus)
Unit
No. Topic
Teaching
Hours
Faculty
Member
1
Operations Research:
Origin of Operation Research, Historical Standpoint,
Methodology, Different Phases, Characteristics, Scope and
Application of Operations Research.
02 Dr. HST
2
Linear Programming Problem:
Introduction, Requirement of LP, Basic Assumptions,
Formulation of LP, General Statement of LP, Solution
techniques of LP: Graphical Methods, Analytical
Methods: Simplex, Big M and Two Phase, Sensitivity
Analysis, Primal and Dual Problems, Economic
Interpretation.
08 Dr. HST
3
Transportation and Assignment: Transportation Problems definition, Linear form, Solution
methods: North west corner method, least cost method, Vogel’s
approximation method. Degeneracy in transportation, Modified
Distribution method, Unbalanced problems and profit
maximization problems. Transshipment Problems. Assignment
Problems and Travelling sales man Problem.
06 Dr. HST
4
Queuing Theory:
Basis of Queuing theory, elements of queuing theory, Kendall’s Notation, Operating characteristics of a queuing system, Classification of Queuing models, Preliminary examples of
M/M/1:∞/FCFA
05 Dr. HST
5
Inventory Control:
Inventory classification, Different cost associated to Inventory,
Economic order quantity, Inventory models with deterministic
demands, ABC analysis.
04 Dr. HST
6
Replacement theory:
Introduction, Replacement of capital equipment which depreciated
with time, replacement by alternative equipment, Group and
individual replacement policy.
03 Dr. HST
7
Game Theory:
Introduction, Characteristics of Game Theory, Two Person, Zero
sum games, Pure strategy. Dominance theory, Mixed strategies (2x2,
mx2), Algebraic and graphical methods. .
04 Prof. DJD
8
Decision Theory:
Introduction, Decision under certainty, Decision under risk,
Decision under uncertainty: Laplace criterion, MaxiMin criterion,
MiniMax criterion, savage MiniMax regret criterion, hurwicz
criterion, Decision tree.
04 Prof. DJD
9
Project Management: Introduction to PERT and CPM, critical Path calculation, float
calculation and its importance. Cost reduction by Crashing of activity. 06 Prof. DJD
Total Hours 42
Reference Books:
1. Operation Research By J. K. Sharma
2. Operations Research: An Introduction by Hamdy Taha, Pearson
3. Operations Research by A M Natarajan, P Balasubramani, A Tamilarasi, Pearson
Education Inc
4. Operations Research by P Mariappan, Pearson
5. Operations Research by H N wagner, Prentice hall.
6. Optimization in Operations Research by Ronald Rardin, Pearson Education Inc.
7. Operations Research by R. Paneerselvam, Prentice Hall of India Pvt. Ltd.
8. Quantitative Techniques in Management by N D Vohra, Tata McGraw-Hill
Staff Member H.O.D. Dr. H S Trivedi Dr. A V Gohil Prof. D J Desai
GUJARAT TECHNOLOGICAL UNIVERSITY Shantilal Shah Engineering College, Bhavnagar
Production Engineering Department 7th Production Engineering – List of Tutorials Subject: Operation Research (New Syllabus)
List of Tutorials:
1. Exercise on definition, formulation of linear programing problems.
2. Exercise on Graphical solution of linear programing problems
3. Exercise and case problems on Simplex, Big M and Two phase LP Problems
4. Exercise and case problems on Dual and Primal LP Problems
5. Exercise and case problems on Sensitivity Analysis
6. Exercise and case problems on Transportation and Transhipment Problems.
7. Exercise and case problems on Assignment and Travelling sales man Problems
8. Exercise and case problems on Queuing theory
9. Exercise and case problems on Game theory
10. Exercise on Inventory model
11. Exercise on Replacement Theory
12. Exercise and case problems on PERT/CPM
Reference Books: 1. Operation Research By J. K. Sharma
2. Operations Research: An Introduction by Hamdy Taha, Pearson
3. Operations Research by A M Natarajan, P Balasubramani, A Tamilarasi, Pearson
Education Inc
4. Operations Research by P Mariappan, Pearson
5. Operations Research by H N wagner, Prentice hall.
6. Optimization in Operations Research by Ronald Rardin, Pearson Education Inc.
7. Operations Research by R. Paneerselvam, Prentice Hall of India Pvt. Ltd.
8. Quantitative Techniques in Management by N D Vohra, Tata McGraw-Hill
Staff Member H.O.D. Dr. H S Trivedi Dr. A V Gohil Prof. D J Desai
Subject: Computer Aided Manufacturing (2171903)
LIST OF EXPERIMENTS
1. Study of Computer Integrated System
2. Study of NC Technology
3. Study of CNC Part Programming
4. Simulation of CNC Lathe operation (Facing cycle)
5. Simulation of CNC Lathe operation (Turning and step turning cycle)
6. Simulation of CNC Lathe operation (Threading and grooving cycle)
7. Simulation of CNC milling operation (Linear and circular interpolation)
8. Problems on Group Technology and Industrial case problems on coding
9. Problems on Computer aided part programming and Industrial case
problems
10. Study of Flexible Manufacturing system
11. Study of Robotics Technology
12. Problems on MRP-I, MRP-II
SHANTILAL SHAH ENGINEERING COLLEGE
Department of Production Engineering
LECTURE PLAN & LAB/TUTORIAL PLAN
Course Code : 2171903 Year/Semester
:
BE- IV, Year/ 7th
Semester
Course Name : Computer Aided
Manufacturing
Academic Year
:
2018/ ODD
L –T- P : 3-0-2 Credit : 5
Course Detail : Theory and Practical Term Start
Date :
18/06/2018
Course Coordinator : Prof. K. P. Patel Term End
Date :
17/10/2018
Team of Instructors : - Class Test 1 : 01/08/2018
Faculty Name: Prof. K. P. Patel
Prof. T.S. Vala
Class Test 2 : 03/09/2018
Mid Term
Exam :
-
SHANTILAL SHAH ENGINEERING COLLEGE, BHAVNAGAR
Department of Production Engineering
Lesson Plan
Academic Year : 2018 Sem. : 7th Division-A
Name of Teacher : Prof. K.P.Patel, Name of Department : Production Engineering
Subject : Computer Aided Manufacturing Hrs./Week : 3
Theory/Tutorial : Theory Days : Monday, Tuesday, Wednesday
Sr.
No. Name of Unit/Topics
Hrs.
Allotted
Planned
Date
Actual
Date
Teaching
Aid Code Remark
1 Unit 1: Introduction 3
A CAM Concepts, Objectives & scope, Nature &
Type of manufacturing system, Evolution 1
18/6/2018
B Benefits of CAM, Role of management in CAM,
Concepts of Computer Integrated Manufacturing 1
19/6/2018
C Impact of CIM on personnel, Role of
manufacturing engineers, CIM Wheel to
understand basic functions
1 20/6/2018
2 Unit 2: NC/CNC Machine Tools 7
A NC and CNC Technology: Types, Classification,
Specification and components 1
25/6/2018
B Construction Details, Controllers, Sensors and
Actuators 1
26/6/2018
C CNC hardware: Re circulating ball screw, anti-
friction slides, step/servo motors. 1
27/6/2018
D Axis designation, NC/CNC tooling. 1 2/7/2018
E Fundamentals programming, Types of format 1 3/7/2018
F Part Programming for drilling 1 4/7/2018
G Part Programming for lathe and milling machine 1 9/7/2018
H Do loops and canned cycles in part programming 1 10/7/2018
I
Subroutines and parametric sub routines in Part
Programming 1
11/7/2018
3 Unit 3: Group Technology and CAPP
6
A Introduction, part families 1 16/7/2018
B part classification and coding systems: OPITZ,
PFA, FFA 1
17/7/2018
C Cell design, rank order clustering, 1 18/7/2018
D Composite part concepts, Benefits of group
technology 1
23/7/2018
E Approaches to Process Planning, Different CAPP
system 1
24/7/2018
F Application and benefits of CAPP 1 25/7/2018
4 Unit:4 Flexible Manufacturing System
7
A Introduction & Component of FMS 1 30/7/2018
B Needs of FMS, general FMS consideration,
Objectives, Types of flexibility and FMS 1
31/7/2018
C FMS lay out and advantages. Automated material
handling system: Types and Application 1
6/8/2018
D Automated Storage and Retrieval System,
Automated Guided Vehicles 1
7/8/2018
E Cellular manufacturing, Tool Management 1 8/8/2018
F Tool supply system, Tool Monitoring System 1 13/8/2018
G Flexible Fixturing, Flexible Assembly Systems 1 14/8/2018
5 Unit :5 Robot Technology
7
A Introduction: Robot Anatomy, Laws of Robot 1 20/8/2018
B Human System and Robotics, Coordinate system,
Specifications of Robot 1
21/8/2018
C Power sources, actuators and Transducers, Robotic
Sensors, Grippers 1
22/8/2018
D Robot Safety, Robot Programming and Robot
Applications 1
27/8/2018
E Economic Considerations of Robotics system,
Robot Kinematics and Dynamics 1
28/8/2018
F Robot Arm Dynamics. Concepts of Computer
Vision 1
29/8/2018
G Concepts of Machine Intelligence 1 4/9/2018
6 Unit: 6 Integrated Production Management
System
7
A Introduction, PPC fundamentals 1 5/9/2018
B Problems of PPC, MRP-I 1 10/9/2018
C Problems of MRP-II 1 11/9/2018
D Just in Time philosophy 1 12/9/2018
E JIT & GT applied to FMS 1 17/9/2018
F Concepts of Expert System in Manufacturing 1 18/9/2018
G Management Information System 1 19/9/2018
7 Unit:7 Programmable Logic Controllers
2
A Relay Device components, Programmable
controller architecture 1
24/9/2018
B Programming a programmable controller, tools for
PLC logic design.
1 25/9/2018
SHANTILAL SHAH ENGINEERING COLLEGE, BHAVNAGAR
Department of Production Engineering
Lesson Plan
Academic Year : 2018 Sem. : 7th Division-B
Name of Teacher : Prof. K.P.Patel, Prof. T.S. Vala Name of Department : Production Engineering
Subject : Computer Aided Manufacturing Hrs./Week : 3
Theory/Tutorial : Theory Days : Monday, Tuesday, Wednesday
Sr.
No. Name of Unit/Topics
Hrs.
Allotted
Planned
Date
Actual
Date
Teaching
Aid Code Remark
1 Unit 1: Introduction 3
A CAM Concepts, Objectives & scope, Nature &
Type of manufacturing system, Evolution 1
18/6/2018
B Benefits of CAM, Role of management in CAM,
Concepts of Computer Integrated Manufacturing 1
19/6/2018
C Impact of CIM on personnel, Role of
manufacturing engineers, CIM Wheel to
understand basic functions
1 20/6/2018
2 Unit 2: NC/CNC Machine Tools 7
A NC and CNC Technology: Types, Classification,
Specification and components 1
25/6/2018
B Construction Details, Controllers, Sensors and
Actuators 1
26/6/2018
C CNC hardware: Re circulating ball screw, anti-
friction slides, step/servo motors. 1
27/6/2018
D Axis designation, NC/CNC tooling. 1 2/7/2018
E Fundamentals programming, Types of format 1 3/7/2018
F Part Programming for drilling 1 4/7/2018
G Part Programming for lathe and milling machine 1 9/7/2018
H Do loops and canned cycles in part programming 1 10/7/2018
I
Subroutines and parametric sub routines in Part
Programming 1
11/7/2018
3 Unit 3: Group Technology and CAPP
6
A Introduction, part families 1 16/7/2018
B part classification and coding systems: OPITZ,
PFA, FFA 1
17/7/2018
C Cell design, rank order clustering, 1 18/7/2018
D Composite part concepts, Benefits of group
technology 1
23/7/2018
E Approaches to Process Planning, Different CAPP
system 1
24/7/2018
F Application and benefits of CAPP 1 25/7/2018
4 Unit:4 Flexible Manufacturing System
7
A Introduction & Component of FMS 1 30/7/2018
B Needs of FMS, general FMS consideration,
Objectives, Types of flexibility and FMS 1
31/7/2018
C FMS lay out and advantages. Automated material
handling system: Types and Application 1
6/8/2018
D Automated Storage and Retrieval System,
Automated Guided Vehicles 1
7/8/2018
E Cellular manufacturing, Tool Management 1 8/8/2018
F Tool supply system, Tool Monitoring System 1 13/8/2018
Reference Books:
1. Computer Aided Manufacturing by Tien Chien Chang, Pearson Education
2. Automation, Production Systems and Computer Integrated Manufacturing by Mikell P Groover, Pearson
Education
3. Robotics Technology and Flexible Automation, by S R Deb, S Deb, McGraw Hill Education Private
Limited.
4. Flexible Manufacturing Cells and System -William. W. Luggen Hall, England Cliffs, Newjersy 5. Ibrahim Zied, CAD / CAM: Theory and Practice, McGraw-Hill
6. CAD/CAM and automation by Haidary
G Flexible Fixturing, Flexible Assembly Systems 1 14/8/2018
5 Unit :5 Robot Technology
7
A Introduction: Robot Anatomy, Laws of Robot 1 20/8/2018
B Human System and Robotics, Coordinate system,
Specifications of Robot 1
21/8/2018
C Power sources, actuators and Transducers, Robotic
Sensors, Grippers 1
22/8/2018
D Robot Safety, Robot Programming and Robot
Applications 1
27/8/2018
E Economic Considerations of Robotics system,
Robot Kinematics and Dynamics 1
28/8/2018
F Robot Arm Dynamics. Concepts of Computer
Vision 1
29/8/2018
G Concepts of Machine Intelligence 1 4/9/2018
6 Unit: 6 Integrated Production Management
System
7
A Introduction, PPC fundamentals 1 5/9/2018
B Problems of PPC, MRP-I 1 10/9/2018
C Problems of MRP-II 1 11/9/2018
D Just in Time philosophy 1 12/9/2018
E JIT & GT applied to FMS 1 17/9/2018
F Concepts of Expert System in Manufacturing 1 18/9/2018
G Management Information System 1 19/9/2018
7 Unit:7 Programmable Logic Controllers
2
A Relay Device components, Programmable
controller architecture 1
24/9/2018
B Programming a programmable controller, tools for
PLC logic design.
1 25/9/2018
Shantilal Shah Engineering College, Bhavnagar
Production Engineering Department
LECTURE PLAN & LAB/TUTORIAL PLAN
Course Code : 2172502 Year/Semester : BE 4th Year/ 7th Semester
Course Name : Productivity Improvement
Methods
Academic Year : 2018/2019/ Odd
L –T- P : 3-0-2 Credit : 6
Course Detail : Theory and Practical Term Start Date : 18/06/2018
Course Coordinator : Prof. T. S. Vala Term End Date : 17/10/2018
Team of Instructors : - Class Test 1 :
Faculty Name: Class Test 2 :
Mid Term Exam :
SHANTILAL SHAH ENGINEERING COLLEGE BHAVNAGAR
Department of Mechanical Engineering
Practical Plan
Academic Year : 2018 Odd Term Sem. : 7th
Sem
Name of Teacher : Prof. T. S. Vala, Prof. Dr. M. D. Vadhvani Name of Department : Production Engineering
Subject : Productivity Improvement Methods [2172502] Hrs./Week : 2
Theory/Tutorial : Practical Days :
Sr. No. Name of Unit/Topics Hrs.
Allotted
Planned
Date
Actual
Date
Teaching
Aid Code Remarks
1. Introduction to Productivity & implement different tools
to measure productivity of any Organization.
2. To perform Flow process charts.
3. To perform Two handed Process charts.
4. To prepare String diagram.
5. To perform Multiple Activity chart.
6. To prepare Design of work place layout.
7. To calculate Standard time of given job.
8. To conduct experiment on Performance Rating: Dealing
Cards & Walking Distance.
9.
Teaching Aid Code:
Prof. T. S. Vala
Sign of Teacher Sign of H.O.D
1 O.H.P
2 L.C.D PROJECTER
3 MODEL
4 CHART
5 OTHER (VIDEO)
* Remark column should cover any slippages and remedial action planned
LESSON PLANNING, Rev. no. :00 Page no.:__of __
Shantilal Shah Engineering College, Bhavnagar
Production Engineering Department
LECTURE PLAN & LAB/TUTORIAL PLAN
Course Code : 2172502 Year/Semester : BE 4th
Year/ 7th
Semester
Course Name : Productivity Improvement
Methods
Academic Year : 2018/2019/ Odd
L –T- P : 3-0-2 Credit : 6
Course Detail : Theory and Practical Term Start Date : 18/06/2018
Course Coordinator : Prof. T. S. Vala Term End Date : 17/10/2018
Team of Instructors : - Class Test 1 :
Faculty Name: Class Test 2 :
Mid Term Exam :
Shantilal Shah Engineering College, Bhavnagar
Production Engineering Department
Lesson Plan Academic Year : 2018 Odd Term Sem. : 7th Sem
Name of Teacher : Prof. T. S. Vala, Prof. Dr. M. D. Vadhvani Name of Department : Production Engineering
Subject : Productivity Improvement Methods [2172502] Hrs./Week : 3
Theory/Tutorial : Theory
Sr.
No Topic
No. of
Hours
Planned
Date
Actual
Date
Teaching
Aid Code Remarks
1 Unit 1: Productivity Management 8
A Definition, Concept and Importance of productivity,
Difference between Production and Productivity, 1
B Tools of productivity, Reasons for low productivity, 1
C Factors that help increasing productivity 1
D Productivity index, Kinds of productivity measurement, 1
E Causes of low productivity and techniques of their
elimination, 1
F Factors affecting productivity, Technical methods to
improve productivity, 1
G Main contributors to productivity improvement, 1
H Advantages from increased productivity 1
2 Unit 2: Method Study 6
A Definition, Concept , Objectives and Procedure of method
study
1
B Process chart symbols, recording techniques like Flow
process charts,
1
C Operation, Flow and Two handed Process charts, 1
D Flow diagram, String diagram, Multiple Activity chart, 1
E Operation Analysis, Analysis of motion, Motion economy,
Design of work place layout,
1
F Therbligs, SIMO chart. 1
3 Unit 3: Work Measurement; 8
A Definition, Concept and Objectives of work measurement, 1
B Stop watch procedure for collecting time study data, 1
C Time estimating techniques like analytical estimating, 1
D Predetermine Motion Time System-PMTS 1
E Elemental Motion Time System, 1
F Basic Motion Time System, 1
G Method Time Measurement, 1
H Work factor. 1
4 Unit 4 : Ergonomics 4
A Introduction, Principles, Work system design 1
B Man-machine system, Human behavior and equipment
design 1
C Tools, Techniques and applications 1
D Effect of environment on performance of worker 1
5 Unit 5: Performance Rating, Wage Payment &
Incentive Plans 4
A Introduction, Various incentive schemes 2
B Performance Rating 2
6 Unit 6: Business Process Re-engineering (BPR). 8
A Introduction, Development of Business Process Re-engine, 1
B BPR is not for everyone, Advantages of BPR, 1
C Steps involved in BPR, Application of BPR, Training for 1
BPR, When to reengineer, Ways to fail at BPR,
D Requirements of BPR, Human Resource Engineering,
Fundamentals of BPR, 1
E Implementation methodology of BPR, Organizational re-
engineering, 1
F Organizational re-engineering process, Reengineering
values, Approach to re-engineering, 1
G Re-engineering tools, What re-engineering is not, 1
H Kinds of changes that occurs in re-engineering, succeeding 1
7 Unit 7: CONTEMPORARY ISSUES IN
PRODUCTIVITY 4
A Activities of National Productivity Council and other
organizations, Productivity Scenario and changes. 1
B Activities of National Productivity Council and other
organizations, Productivity Scenario and changes. 1
C Activities of National Productivity Council and other
organizations, Productivity Scenario and changes. 1
D Activities of National Productivity Council and other
organizations, Productivity Scenario and changes. 1
Total 56
Reference Books:
1. Introduction to Work study, ILO, Oxford
2. Work Study, Khanna , Dhanpat Rai Publications
3. Total Quality Management , K.C.Arora, Katsons
4. Industrial Engineering and Management, Khana, Dhanpat Rai
5. Industrial Engineering and Management, Reddy, New Age
6. Industrial Engineering and Management , Verma,
Teaching Aid Code:
Prof. T. S. Vala
Sign of Teacher Sign of H.O.D
1 O.H.P
2 L.C.D PROJECTER
3 MODEL
4 CHART
5 OTHER (VIDEO)
* Remark column should cover any slippages and remedial action planned
LESSON PLANNING, Rev. no. :00 Page no.:__of __
SHANTILAL SHAH ENGINEERING COLLEGE
Department of Production Engineering
B.E.SEMESTER–VII (Production)
SUBJECT CODE: 2172505
Supply Chain Management (DE-II)
Lesson Planning
Sr.
No Topic
No. of
Hours Staff
1 Introduction, Generic Types of supply chain, 1 Prof. UKC
2 Various Definitions and Implications 1 Prof. UKC
3 Major Drivers of Supply chain 1 Prof. UKC
4 Strategic Decisions in Supply Chain Management
Introduction, Customer Relationship Management Strategy, 1 Prof. UKC
5 Business Strategy, Core Competencies in Supply
Chain, Strategic SC Decisions, 1 Prof. UKC
6 Supplier Relationship Management Strategy 1 Prof. UKC
7 Case study on strategization of SCM 1 Prof. UKC
8 Sourcing in SCM- Introduction 1 Prof. UKC
9 Strategic Sourcing, A Collaborative Perspective, Development of
Partnership 1 Prof. UKC
10 Development of Partnership 1 Prof. UKC
11 Case discussion on Strategic Sourcing 1 Prof. UKC
12 Case discussion on Strategic Sourcing 1 Prof. UKC
13 Inventory Management in Supply Chain-Introduction 1 Prof. NPN
14 Types of Inventory and Supply/ Demand Uncertainties 1 Prof. NPN
15 Inventory costs, Selective Inventory Control 1 Prof. NPN
16 Vendor Management for Inventory system 1 Prof. NPN
17 Inventory Performance Measurement 1 Prof. NPN
18 Case study 1 Prof. NPN
19 Logistics In Supply Chain Management -Introduction 1 Prof. NPN
20 Strategization for Transportation Selection and Trade-offs 1 Prof. NPN
21 Vehicle-routing problem 1 Prof. UKC
22 Third Party Logistics 1 Prof. UKC
23 Overview of Indian Infrastructure for Transportation sector 1 Prof. UKC
24 Information Technology in Supply Chain
Introduction 1 Prof. UKC
25
Types of IT Solutions like Electronic Data Inter -change (EDI),
Intranet/ Extranet, Data Mining/ Data Warehousing, E-
Commerce, E-procurement, Bar Coding Technology
1 Prof. UKC
26
Types of IT Solutions like Electronic Data Inter -change (EDI),
Intranet/ Extranet, Data Mining/ Data Warehousing, E-
Commerce, E-procurement, Bar Coding Technology
1 Prof. UKC
27 Information System in Supply Chain- Introduction 1 Prof. UKC
28 Computer Based Information Systems 1 Prof. NPN
29 Computer Models and Perceptions about ERP 1 Prof. NPN
30 ERP & SCM case discussion 1 Prof. NPN
31 Application of Mathematical Modeling in Supply Chain -
Introduction 1 Prof. NPN
32 Modeling, Consideration in Modeling SCM System 1 Prof. UKC
33 Structuring the Logistic chain 1 Prof. UKC
34 Structuring the Logistic chain 1 Prof. NPN
35 Reverse Supply Chain -Introduction, Reverse Supply Chain v/s
Forward Supply Chain 1 Prof. UKC
36 Types of Reverse Flows, Issues in management of Reverse
Supply Chain 1 Prof. UKC
37 Reverse Supply Chain for Food items, Reverse Logistic and
Environment Impact 1 Prof. UKC
38 Integration & Collaborative Supply Chain
Introduction 1 Prof. NPN
39 Evolution of collaborative SCM, Efficient Customer response 1 Prof. NPN
40 Collaboration at various levels, Imperatives for Successful
integrative Supply 1 Prof. NPN
41 Agile Supply Chain Introduction 1 Prof. UKC
42 Source of Variability, Characteristics of Agile Supply Chain 1 Prof. UKC
Achieving Agility in Supply Chain 1 Prof. UKC
43 Case studies 1 Prof. UKC
44 Case studies 1 Prof. UKC
Total 44
Faculty Member H.O.D.
UKC: Prof. U. K. Chhaya Dr. A. V. Gohil
NPN: Prof. N.P. Nirmal
No of lectures :6 (3 lect/Div)
SHANTILAL SHAH ENGINEERING COLLEGE
Department of Production Engineering
B.E.SEMESTER–VII (Production)
SUBJECT CODE: 2172505
Supply Chain Management (DE-II)
Tutorials
Sr.
No Topic
1
Prepare a write up that includes following major points:
Introduction, Generic Types of supply chain, Strategic Decisions in Supply Chain
Management, Supply chain as a business strategy
2
Prepare a write up that includes following major points:
Inventory Management in Supply Chain-Introduction, Types of Inventory and
Supply/ Demand Uncertainties, Inventory costs, Selective Inventory Control
Vendor Management for Inventory system
3
Prepare a report on:
Overview of Indian Infrastructure for Transportation sector
Refer to blog/research papers/industry reports, and prepare a write up that includes
statistics and figures for last 3 years in infrastructure development and
transportation sectors. You may use FICCI report, CII report, or any similar
authentic literature.
4
Prepare a write-up on
Information Technology in Supply Chain. Includes IT Solutions such as: Electronic
Data Inter -change (EDI), Intranet/ Extranet, Data Mining/ Data Warehousing, E-
Commerce, E-procurement, Bar Coding Technology
5
Prepare a write-up on
Application of Mathematical Modeling in Supply Chain. Refer to research papers
published in last 2 years.
6
Group assignment
This assignment will be submitted in a group of 10 students. The assignment will
consist of a report including all facets of supply chain design of different products,
involving a survey/interview/ of retailer, the OEM, and other key contributing stake
holders. Division of group and the product assignment will be shared in the class.
Faculty In-charge
Shantilal Shah Engineering College, Bhavnagar, Production Engineering Department
Lesson Plan for Quality Engineering & Management 2172507 Winter Term 18/06/18 to 17/10/18
Prof. Dr. Maya D. Vadhvani, Course Coordinator Page 1/1
Topic Content-Hours required Planned Dates Actual
Dates
1. Introduction
to Quality
Management
Indian Companies, Deming Awards, Quality
Management-2
Strategic Quality Management Benchmarking-2
18, 20, 25, 27
June
2. Quality
Standards and
business
excellence
models
Bureau of Indian Standards-1
Quality Council of India-1
International Organization for Standardization-1
Quality Assurance, Quality Circles, Quality
audits-1
17, 24, 31 July
7 August
3. Total
Quality
Management
(TQM)
Deming’s Contribution to TQM-2
Juran, Crosby, Ishikawa’s contribution to TQM-
2
Total Productive Maintenance (TPM)-2
6, 8, 13, 20, 27,
29 August
4. Service
Quality
Management
and Cost of
Quality
Products-1
Services-1
Classification of services-1
Measuring the quality of services-1
Cost of quality models-4
14, 21, 28 August
4, 11, 18, 25
September
9 October
5. Six sigma
and
Experimental
design
Meaning of Six sigma & 7 quality tools-2
Introduction of experimental design-2
Taguchi Method in Experimental Design-2
QFD-2
3, 5, 10, 12, 17,
19
24, 26 September
6. Statistical
Quality
Control
Quality control- introduction and benefits
Variation in processes: 2
control charts for variables and attributes,
Establishing & interpreting control charts,
Acceptance Sampling-2
Operating characteristic curves-2
Use of standard sampling tables-2
Vendor ratings-2
1, 4, 9, 11, 16, 18,
23, 25, 30 July
1 August
7. Intellectual
property rights Definition & Importance-2
Patent, Copyright, Industrial design, Trademark-2
19, 26 June
3, 10 July
Tentative dates of industrial visit are in 2nd
week of July and 1st week of
September.
Page 1 of 1
Prof. Dr. M. D. Vadhvani
Shantilal Shah Engineering College, Bhavnagar
Production Engineering Department
Semester VII
Quality Engineering & Management (2172507)
List of Tutorial, Term 18/6/18 to 17/10/18
Sr.
No Topic
1.
Prepare a write up that includes following major points.
Deming Award, Conceptual Framework(s) of Quality Management,
Strategic Quality Management, Benchmarking, Quality Circle
2.
Prepare a write up that includes following major points.
Quality System Standards, Bureau of Indian Standards, International
Organization for Standardization, Quality Council of India, Quality
Assurance and Quality Audit
3
Prepare brief notes on the following topics.
Contribution of Adwards Deming in Total Quality Management (TQM),
Juran’s Contribution in TQM, Crosby’s Contribution in TQM, Ishikawa’s
Contribution in TQM
4.
Prepare Case Studies on following topics. Gather information from
published research articles or from industry.
Total Productive Maintenance
7 Quality Tools
Cost of Quality
Quality Improvement in Service Industries
5.
Prepare short notes on following topics.
Quality Control Charts, Process Capability, Operation Characteristics
Curve, Acceptance Sampling, Single, Double, Multiple and Continuous
Sampling, Consumers’ and Producers’ Risk, Vendor Rating
6.
With the help of reference searching, prepare articles on
Intellectual Properties, Intellectual Property Right (IPR), Patent, Copyright,
Industrial Design, Trademark