H a b a s i t L I N K®

Modular Belts

Product Guide2300US

Habasit–Solutions in motion

1'' PITCH BELTS — M2500 SERIES

M2510Flat Top open hinge

M2500Grip Top closed hinge

M2511Perforated Flat Top open hinge

M2520Flat Top closed hinge

M2520Roller Top closed hinge

M2531Raised Rib open hinge

M2533Flush Grid open hinge

M2540Radius Flush Grid open hinge

M2540Radius Flush Grid Grip Top - open hinge

M2540Radius Roller Top open hinge

M2543 Tight Ra d i u sopen hinge

1'' PITCH BELTS — M2600 SERIES

M2620Flat Top Heavy Dutyclosed hinge

M2620Grip Topclosed hinge

H a b a s i t L I N K®

the smart modular belt

FEATURES

C o n s t r u c t i o n : H a b a s i t L I N K® plastic modularc o nveyor belts are assembled in a brick l a y e dp a ttern for lateral strength, and this featureallows the construction of virtually any widthand length. Our custom-made belts areavailable with flights and sideguards as anintegral part of the belt, and are securedwith full-length plastic hinge rods.

Materials: Each belt style is available in FDAapproved polypropylene, polyethylene, oracetal to meet a wide range of operatingtemperatures, chemical resistance andapplication requirements.

ADVANTAGES

Installation: Because of the modular design,HabasitLINK® belts can be installed withinminutes without using complicated tools orfasteners.

Positive Drive and Tracking: HabasitLINK®

sprockets eliminate the need for high-ten-sion systems by positively engaging the beltand maintaining proper belt alignment,eliminating edge damage.

S p r o cke t s : All sprockets are injection moldedand feature an “open-window” design, whichallows easy access for sanitation across thewidth of the conveyor shafts. Smooth linesand radiused corners virtually eliminateareas where debris can be trapped. There is acomplete range of pitch diameters and bores i zes to suit most applications. HabasitLINK®

s p r o ckets are specific to belt pitch only. Eachbelt style within a given pitch uses the sames p r o cket. That means one sprocket for theFlush Grid, Flat Top, Raised Rib and even theRadius belts.

Sanitation: Habasit’s oblong hole improvesaccess to the hinge rod along the entirewidth of the belt. The hinge design redirectswater flow to improve sanitation.

Maintenance: General maintenance andrepairs can be completed with a minimumof downtime.

0.5'' PITCH BELTS — M1200 SERIES

M1220Flat Top open hinge

M1220Grip Top open hinge

M1233Flush Grid open hinge

2.0'' PITCH KNUCKLECHAIN

2'' PITCH BELTS — M5000 SERIES

M5010Flat Top open hinge

M5010Roller Top open hinge

M5010Grip Top open hinge

M5011Perforated Flat Top open hinge

M5013Cone Top open hinge

M5014Nub Top open hinge

M5020Flat Top Heavy Dutyclosed hinge

M5020Grip Top closed hinge

M5021Perforated Flat Top closed hinge

M5023Non Slipclosed hinge

M5023Non Skidclosed hinge

M5031Raised Ribclosed hinge

M50320°, 45°, 90° Roller Topclosed hinge

M5032Flush Grid Heavy Dutyclosed hinge

M5033Flush Grid open hinge

M5131Raised Rib closed hinge

1.5'' PITCH BELTS — M1200 SERIES

M3840Radius Flush Grid open hinge

M3840Radius Roller Top open hinge

M3843Radius Flush Grid Tight Turn - open hinge

FLIGHTS

Belt Specifications *Please refer to the Engineering Guidelines for curved belt strength. W=white, G=gray, B=blue, N=natural, BK=black, R=red, T = tan, H=H a b a G UA R D®

SIDEGUARDS

M1220 0.5 Flat Top G,W N,H W,B,H 0 0.39 yes 0.20 754 411 1,096M1220 0.5 Grip Top G,W 0 0.49 yes 0.20 754 N/A 1,096M1233 0.5 Flush Grid G,W N,H W, B , H , D , G 25 0.39 yes 0.20 750 480 1,096M2500 1 Grip Top G,W B 0.55 no 0.20 1233 N/A 1781M2510 1 Flat Top W N,H W,H 0 0.43 yes 0.20 959 548 1096M2511 1 Perforated Flat Top W N W 16 0.43 yes 0.20 753 479 1027M2520 1 Flat Top G,W,B N G,W,B 0 0.39 no 0.20 1233 616 1473M2520 1 Roller Top G,W,B N G,W,B 0 0.55 no 0.20 1,233 616 1,473M2531 1 Raised Rib G,T B 35 0.63 yes 0.20 1,096 N/A 1,300M2533 1 Flush Grid G , W, T, N N,H W,B,H 35 0.39 yes 0.20 959 548 1,233M2540 1 Radius Flush Grid G,T,N W,H 35 0.43 yes 0.20 1,300* N/A 1,850*M2540 1 Radius Flush Grid Grip Top G,W W,H, 35 0.62 yes 0.20 1,300* N/A 1,850*M2540 1 Radius Roller Top G,W W,H 35 0.59 yes 0.20 1,300* N/A 1,370*M2543 1 Radius Flush Grid Tight Tu rn W W,B 35 0.50 yes 0.20 959 N/A 1,370M2620 1 Flat Top Heavy Duty G D,G 0 0.50 no 0.22 1815 N/A 3,083M2620 1 Grip Top G DG 0 0.60 no 0.22 1815 N/A 3,083M3840 1.5 Radius Flush Grid G,W W,H,B 31 0.70 yes 0.23 1,712* N/A 2,192*M3840 1.5 Radius Roller Top G,W W,H,B 31 0.95 yes 0.23 1,712* N/A 2,192*M3843 1.5 Radius Flush Grid Tight Tu rn W W 0 0.70 yes 0.23 1,370 N/A 1,986M5010 2 Flat Top G,W N,BK,R,T,H R,B,W,H 0 0.63 yes 0.27 1,233 685 1,233M5010 2 Roller Top G,W N,BK,R,T,H R,B,W,H 0 0.91 yes 0.27 1,233 685 1,233M5010 2 Grip Top G,W 0 0.75 yes 0.27 1,233 N/A 1,233M5011 2 Perforated Flat Top W N W 15 0.63 yes 0.27 1,233 685 1,233M5013 2 Cone Top W N W 0 0.75 yes 0.27 1,233 N/A 1,233M5014 2 Nub Top W N 0 0.74 yes 0.27 1,233 685 N/AM5020 2 Flat Top G DG 0 0.63 no 0.27 2398 N/A 3,083M5020 2 Grip Top G,W 0 0.70 no 0.27 2398 N/A 3,083M5021 2 Perforated Flat Top W N 25 0.63 no 0.27 2056 1,370 N/AM5023 2 Non Skid Y,B K 0 0.68 no 0.27 2398 N/A 3,038M5031 2 Raised Rib G 34 0.95 no 0.27 2,055 N/A N/AM5032 2 0°, 45°, 90° G,W 34 1.26 no 0.27 1,712 1,644 N/A M5032 2 Flush Grid Heavy Duty G,W 34 0.63 no 0.27 1,781 1,233 N/A M5033 2 Flush Grid G,W N 37 0.63 yes 0.27 1,781 1,233 N/A M5131 2 Raised Rib G 36 0.95 no 0.27 2,192 N/A N/A

inch inchPP PE POM [%]PP

lb/ft

PE POM inch

FINGER TRANSFER PLATES

6 4.0" 1.5 [40]

7 2.3 1 1[25] [25]

8 5.3* 1.5 4.0 1.5 2.6 1 1, 1.1875[40] [40] [25] [25, 30]

10 6.5* 1.5, 2.5 3.3 1, 1.5 1, 1.1875 1.6 0.75[40, 60] [25, 40] [25, 30] [20]

12 7.8* 1.5, 2.5 5.9 1.5,2.5 3.9 1.5 1 , 1 . 1 8 7 5 3.9* 1, 1.5 1, 1.1875[40, 60] [40, 60] 1.25,1.5 [25, 40] [25, 30]

15 2.5 1 1[25] [25]

16 10.3* 1.5, 2.5, 3.5 7.8 1.5 5.1 1.5 1 , 1 . 1 8 7 5 5.1 1.5[40, 60, 90] [40] 1.25,1.5 [40]

18 5.8* 1.5 1 , 1 . 1 8 7 5 5.8 * 1.5, 2.5 1, 1.1875[40] 1.25,1.5 [40, 60] [25, 30]

20 6.4 * 1.5, 2.5 1 , 1 . 1 8 7 5[40, 60] [25, 30]

21 6.7 1.5 1 , 1 . 1 8 7 5[40] 1.25,1.5

24 3.9* 1, 1.5 1[25, 40] [25]

28 4.6* 1, 1.5 1[25, 40] [25]

36 5.9 1.5, 2.5 1[40, 60 [25]

PDInch[mm]

Bore SizesSq Rd

PDInch[mm]

Bore SizesSq Rd

PDInch[mm]

Bore SizesSq Rd

PDInch[mm]

Bore SizesSq Rd

PDInch[mm]

Bore SizesSq Rd

Sprocket Specifications * Also available in split sprocket. Items in blue available with HabaGUARD®

M1200Sprocket

M2500Sprocket

M3800Sprocket

M5000Sprocket

The quality management system of HBI is registered to ISO 9001:2000 by ISOQAR.

Rev. 01/05

Habasit Belting, Inc.305 Satellite Boulevard ph: (800) 458-6431Suwanee, GA 30024-7124 fax: (800) HABASITwww.habasitusa.com email: plasticbelts@us.habasit.com