Upload
ngokhuong
View
215
Download
2
Embed Size (px)
Citation preview
M I N I P R O J E C T S 1 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Halloween 2017 Design Projects
M I N I P R O J E C T S 2 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Firery Skull Drop Necklace
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Beads 5750 3 pcs 19mm Crystal Red Magma 001 REDM
Beads 5328 6 pcs 3mm Jet 280
Sew On Stones 3254 8 pcs 20x9mm Jet 280
Sew On Stones 3254 7 pcs 30x14mm Jet 280
Supplies:
42 6mm black round jump rings
3 4mm black oval jump rings
3 24 gauge 2” headpins
1 Large Classic Hook TierraCast®
Instructions
Step 1: Using one head pin slide on one 3mm 5328 jet bead, one 5750 19mm crystal red magma skull bead and then one
5328 3mm jet bead. Wire wrap to close. Using one 4mm oval jump ring attach skull to 3254 30x14mm Diamond
Leaf Sew On jet and set aside. Repeat this 2 more times.
Step 2: Attach together three 6mm jump rings to create a chain. Using last jump ring attach to one end of 3254 30x14mm
Diamond Leaf Sew On jet. Add three 6mm jump rings to other end of sew on. Using last jump ring attach to one
end of 3254 20x9mm Diamond Leaf Sew On stone. Repeat this process adding the diamond leaf sew on stones in
the following order (lg, sm, sm, sm, sm, sm, sm, lg, sm, lg). Add 3 more jump rings and the large classic hook.
Step 3: Find the center of the necklace and using one 6mm jump ring attach one of the components from Step 1. Moving up
two links to the right attach a second component and finally moving two links to the left of center add the third
component.
M I N I P R O J E C T S 3 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Candy Corn Earrings
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Beads 5328 8 pcs 4mm White Alabaster 281
Beads 5328 24 pcs 4mm Hyacinth 236
Beads 5328 26 pcs 4mm Sunflower 292
Supplies:
2 blank ear wires TierraCast 90-1120-00
3’ 26 gauge silver Artistic Wire
Instructions
Step 1: Cut wire into two equal pieces 18” long.
Step 2: Load onto one piece of wire 13 Swarovski XILION Beads art. 5328 4 mm Sunflower. Moving 6 Beads off to one
side and keeping the 7 remaining Beads in the center of the wire, take the wire exiting from the 6 Beads and
string the wire through all 7 Beads. (Note: the wire tails should be exiting in opposite directions from the 7 Beads.
The 6 Beads should be sitting on top of and in between the 7 Beads art. 5328 Sunflower. It is important to keep
tension on the wire when weaving.)
Step 3: String onto one of the wire sides, 5 Beads art. 5328 4 mm Hyacinth. Take the wire from the side with no Beads
and string the wire through the 5 Beads. (Note: the wire tails should be exiting in opposite directions from the
5 Beads art. 5328 Hyacinth and the 5 Beads should be sitting on top and in between the 6 Beads art. 5328
Sunflower from the previous step.)
Step 4: Repeat step 3 using 4 Beads art. 5328 4 mm Hyacinth.
Step 5: Repeat step 4 using 3 Beads art. 5328 4 mm Hyacinth.
Step 6: Repeat step 5 using 2 Beads art. 5328 4 mm White Alabaster.
Step 7: Repeat step 6 using one Bead art. 5328 4 mm White Alabaster.
(You can exchange Tangerine for Hyacinth if preferred or Light Topaz for Sunflower)
M I N I P R O J E C T S 4 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Scary Charm Bangle
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Beads 5750 1 pc 13mm Crystal Golden Shadow 001 GSHA
Beads 5750 1 pc 13mm Crystal Metallic Lt Gold 2X 001 MLG2
Beads 5328 2 pcs 6mm Crystal Metallic Lt Gold 2X 001 MLG2
BeCharmed 80901 1 pc 12mm Crystal Metallic Lt Gold 001 MLGLD
Pendants 6480 1 pc 18mm Crystal Gold Patina 001 GOLPA
Rivolis 1122 1 pc 12mm Crystal Black Patina F 001 BLAPA
Supplies:
1 Rivoli Frame TierraCast® 94-2366-27
1 Rose Skull TierraCast® 94-5685-27
1 Skull Charm TierraCast® 94-2455-27
1 12 gauge wire bracelet TierraCast® 01-0301-27
6 6mm jumprings
4 2” headpins
Swarovski crystal two-part epoxy glue
Alcohol wipes
Instructions
Step 1: Clean the Rivoli frame with the alcohol wipe. Using two part epoxy glue the Rivoli into the Rivoli frame and add a
jump ring and set aside.
Step 2: Using a headpin slide on one crystal skull bead and make a simple loop and add a jump ring. Repeat for second skull
bead and set aside.
Step 3: Using a headpin slide on one bicone, one BeCharmed bead and one bicone and make a simple loop and add a jump
ring. Set aside.
Step 4: Using a headpin slide on brass Rose skull and make a simple loop and add a jump ring. Set aside.
Step 5: Add a jump ring to the spike pendant and set aside.
Step 6: Using all the components made in Steps 1-5 add to the wire bracelet in your favorite order.
M I N I P R O J E C T S 5 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Hurray for Orange and
Black
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Crystal Pearls 5810 18 pcs 3mm Crystal Neon Orange 001 733
Crystal Pearls 5810 36 pcs 4mm Crystal Neon Orange 001 733
Crystal Pearls 5810 36 pcs 6mm Crystal Neon Orange 001 733
Beads 5750 2 pcs 13mm Jet 280
Beads 5328 10 pcs 6mm Jet 280
Beads 5328 4 pcs 4mm Jet 280
Pave Beads 86001 2 pcs 8mm Jet 280
BeCharmed Beads 80901 2 pcs 12mm Jet 280
Supplies:
2 2” headpins
3½ rings of memory wire
Instructions
Step 1: Using one head pin slide on one skull bead and make a simple loop. Repeat once and set aside.
Step 2: Using a round nose plier turn one end of the memory wire until you have a double turn.
Step 3: Onto the memory wire slide on one 5328 6mm jet bicone, {two 6mm pearls, two 4mm pearls, two 3mm pearls, two
4mm pearls, 6mm pearls, one 5328 6mm jet bicone, one BeCharmed bead, and one 5328 6mm jet bicone. Repeat
the pearl section and add one Pave Ball, repeat the pearl section and add one 5328 4mm bicone, one 5238 6mm
bicone and one 5328 6mm bicone. Repeat the pearl section and add one 5328 6mm bicone.} Repeat the entire
pattern in brackets one more time to finish bracelet.
Step 4: Trim the memory wire to leave a 1” tail. Using the pliers turn the wire until it tightens to the last bead.
Step 5: Using the skulls from Step 1, add onto each of the loops on the bracelet to complete.
M I N I P R O J E C T S 6 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Skull Drops
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Crystal Pearls 5810 4 pcs 4mm Crystal Neon Orange 001 733
Pave Beads 86001 2 pcs 8mm Jet 280
Supplies:
2 Scary Skull Buttons TierraCast® 94-6572-12
2 2” headpins
2 2” eye pins
2 ear wires
Swarovski crystal two-part epoxy glue
Alcohol wipes
Instructions
Step 1: Using one headpin slide on one pave ball and one pearl. Leaving ¼” of space on the headpin make a simple loop.
Attach this to the bottom of the button shank where it will swing freely.
Step 2: Using one eye pin slide on one pearl. Leaving ¼” of space on the eye pin make a simple loop. Attach the ear wire
to one end. Attach the other end of the eye pin to the top half of the button shank. Slide the pearl up to the top of
the ear wire. Using the alcohol wipe clean the back of the button. Using a small drop of two-part epoxy placed on
the back of the button above the shank to hold the eye pin in place. Set aside.
Step 3: Repeat Steps 1-2 for second earring.
M I N I P R O J E C T S 7 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Wicked Witch of the West
Earrings
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Crystal Pearls 5810 2 pcs 12mm Crystal Iridescent Green 001 930
Beads 5540 2 pcs 12mm Jet 280
Beads 5328 2 pcs 4mm Jet 280
Sew On Stones 3700 2 pcs 12mm Crystal Vitrail Medium 001 VM
Supplies:
2 ear wires
2 2” headpins
Instructions
Step 1: Using one head pin, slide on one pearl, one sew on (coated side up), one artemis bead, and one bicone. Make a
simple loop and add ear wire.
Step 2: Repeat Step 1 to make second earring.
M I N I P R O J E C T S 8 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Witchypoo Dropped In
Charm Necklace
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Crystal Pearls 5860 1 pc 10mm Crystal Iridescent Green 001 930
Crystal Pearls 5840 2 pcs 8mm Crystal Iridescent Green 001 930
Beads 5750 1 pc 13mm Crystal Luminous Green 001 LUMG
Beads 5328 2 pcs 6mm Jet 280
Beads 5328 1 pc 4mm Jet 280
BeCharmed Beads 80401 1 pc 16mm Jet 280
Supplies:
1 Witches Head lampwork bead
1 Witch Charm TierraCast® 94-2379-13
1 Bat Charm TierraCast® 94-2380-13
5 2” headpins
7 6mm jump rings
1 30” 2.4mm Ball chain with connector TierraCast® 20-1430-00
Instructions
Step 1: Using a headpin slide on one skull bead, make a simple loop and attach one jump ring. Set aside.
Step 2: Using a headpin slide on one 4mm jet bicone and witches lampwork bead, make a simple loop and attach one jump
ring. Set aside.
Step 3: Using a headpin slide on one 6mm jet bicone, one BeCharmed Spike Bead and one 6mm jet bicone, make a simple
loop and attach one jump ring. Set aside.
Step 4: Using a headpin slide on two baroque pearls, make a simple loop, and attach one jump ring. Set aside.
Step 5: Using a headpin slide on one coin pearl, make a simple loop, and attach one jump ring. Set aside.
Step 6: Attach a jump ring to each of the TierraCast charms. Set aside.
Step 7: Using all the components made in Steps 1-6 and slide them onto the ball chain in your favorite order.
M I N I P R O J E C T S 9 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Day of the Dead Chandelier
Earrings
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Beads 5328 10 pcs 4mm Crystal Astral Pink 001 API
Beads 5052 4 pcs 6mm Jet 280
Supplies:
1 Sugar Skull Charm TierraCast® 94-2320-26
1 Coffin Charm TierraCast® 94-2323-26
2 Dancing Senor Charm TierraCast® 94-2316-26
2 Dancing Senorita TierraCast® 94-2317-26
6 Bone Links TierraCast® 94-3130-26
2 6-Hole End Bar Link TierraCast® 94-3169-26
2 ear wires
6 2” eye pins
8 4mm round jump rings
Instructions
Step 1: Using an eye pin attach one of the Senorita charms, slide on one 5052 6mm jet bead and make a simple loop. Attach
loop to one of a bone link. Repeat once and set aside.
Step 2: Using an eye pin attach one of the Senor charms, slide on one 5052 6mm jet bead and make a simple loop. Attach
loop to one of a bone link. Repeat once and set aside.
Step 3: Using an eye pin attach one Coffin charm, slide on four 5328 4mm crystal astral pink bicones and make a simple loop.
Attach loop to one of a bone link. Set aside.
Step 4: Using an eye pin attach one Sugar Skull charm, slide on six 5328 4mm crystal astral pink bicones and make a simple
loop. Attach loop to one of a bone link. Set aside.
Step 5: To make first earring use the 6-hole bar. In the first hole use a jump ring and add one component from Step 1. In
the sixth hole use a jump ring and add one component from Step 2. Using two jump rings attach them both to the
component from Step 3, then attach one ring to hole 3 and the other to hole 4. Now attach an ear wire to the top of
the bar.
Step 6: To make second earring use the 6-hole bar. In the first hole use a jump ring and add one component from Step 1.
In the sixth hole use a jump ring and add one component from Step 2. Using two jump rings attach them both to
the component from Step 4, then attach one ring to hole 3 and the other to hole 4. Now attach an ear wire to the
top of the bar.
M I N I P R O J E C T S 1 0 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Skull Ring
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Flat back No Hot Fix 2856 1 pc 18x14mm Crystal Light Chrome F 001 LTCH
Supplies:
1 Flat top Ring base
Swarovski crystal two-part epoxy glue
Alcohol wipes
Instructions
Step 1: Using the alcohol wipe, clean the ring base.
Step 2: Mix the two part epoxy and glue the skull flat back to the ring base. Set aside to dry for at least 24 hours.
M I N I P R O J E C T S 1 1 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Jack the
Luminary
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Beads 5328 100 pcs 4mm Jet 280
Beads 5328 22 pcs 4mm Tangerine 259
Beads 5328 20 pcs 4mm White Alabaster 281
Beads 5328 20 pcs 4mm Sunflower 292
Supplies:
2 Candy Corn lampwork beads
2 2” headpins
2 6mm round jumprings
1 3” black ball chain with end connector
1 5” black ball chain with end connector
50” 24 gauge black artistic wire
1 metal Jack O’Lantern luminary
Instructions
Step 1: Using one headpin slide on one candy corn bead and one 5328 4mm tangerine bead and make a simple loop. Make
a simple loop and add a jump ring. Repeat once and set aside.
Step 2: Using the 24 gauge wire attach it to one end of the metal handle. Begin sliding one the beads in the following order:
five 5328 4mm jet beads, one 5328 4mm sunflower bead, one 5328 4mm tangerine bead, and one 5328 4mm white
alabaster. Repeat this pattern 4 more times. At this point begin to twist the wired bead string around the handle on
the luminary. Add more beads and continue twisting around handle until you reach the opposite side. Wire wrap to
the luminary.
Step 3: Using the ball chains, slide on one of the candy corn components made in Step 1 to each of the chains. Hang the
chains onto one side of the luminary.
M I N I P R O J E C T S 1 2 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Sparkly Trick or Treat
Bag
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Beads 5328 50 pcs 3mm Jet 280
Beads 5328 55 pcs 4mm Jet 280
Beads 5328 6 pcs 4mm Crystal Astral Pink 001 API
Beads 5328 7 pcs 6mm Crystal Astral Pink 001 API
Beads 5000 6 pcs 6mm Crystal Astral Pink 001 API
Pendants 6480 6 pcs 18mm Jet 280
Supplies:
1 Scary Cat Charm TierraCast® 94-2376-12
1 Zombie Charm TierraCast® 94-2382-12
1 Ghost Charm TierraCast® 94-2377-12
1 Bat Charm TierraCast® 94-2380-12
1 Grave Stone Charm TierraCast® 94-2381-12
1 Owl Charm TierraCast® 94-2383-12
1 Jack O’Lantern Charm TierraCast® 94-2378-12
13 2” Eye pins
6 6mm jumprings
20” #6 Fireline
1 felted Jack O’Lantern Trick or Treat bag
1 beading needle
Instructions
Step 1: Using one eye pin slide on one 5328 4mm jet bead, one 5328 6mm crystal astral pink, and one 5328 4mm jet bead.
Make a simple loop to close. Add one Halloween charm on the end. Repeat six more times using a different charm
each time. Set aside.
Step 2: Using one eye pin slide on one 5328 3mm jet bead, one 5328 4mm crystal astral pink, one 5328 4mm jet bead, one
5000 6mm crystal astral pink, and one 5328 4mm jet bead. Make a simple loop to close. Using a jump ring attach
one 6480 18mm jet spike pendant to the small end of the beaded eye pin. Repeat five more times. Set aside.
Step 3: To create the fringe on the top of the bag sew down one end of the Fireline. Then begin to slide on one 5328 3mm
jet bead, one 5328 4mm jet bead, one 5328 3mm jet bead, one 5328 4mm jet bead, one 5328 3mm jet bead, one
charm drop made in Step 1. At this point make a stitch into the felt bag to tack down the fringe. Now slide on one
5328 3mm jet bead, one 5328 4mm jet bead, one 5328 3mm jet bead, one 5328 4mm jet bead, one 5328 3mm jet
bead, one spike drop made in Step 2. At this point make a stitch into the felt bag to tack down the fringe. Repeat
this entire pattern 6 more times until all the charm and spike drops are attached. Sew down the end of the fringe to
complete.
M I N I P R O J E C T S 1 3 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Haunted Mansion Tea Towel
Swarovski crystals
Product Group Article No. Amount Size Color Color
Code
Flatback Hot Fix 2856 7 pc 10x7.5mm Crystal Light Chrome M HF 001 LTCH
Flatback Hot Fix 2856 3 pc 14x10.5mm Crystal Light Chrome M HF 001 LTCH
Flatback Hot Fix 2856 1 pc 18x14mm Crystal Light Chrome M HF 001 LTCH
Flatback Hot Fix 2078 30 pcs Ss12 Crystal Light Chrome M HF 001 LTCH
Flatback Hot Fix 2078 30 pcs Ss20 Tangerine 259
Supplies:
Tea Towel (or kitchen towel) with Halloween Design
Iron
1 sheet of Teflon
Instructions
Step 1: Using the Hotfix crystals from the supply list, create a pattern of your choice to highlight the
design on the towel.
Step 2: Turn on iron to hottest setting, no steam, (there should be no water in the iron). Place the
Teflon sheet gently over the crystals (in order not to move them) and press firmly with the
iron to adhere. Do not move the iron back and forth or the crystals will move out of place.
Note: You can also use a hotfix applicator tool to set each crystal individually or use a piece of
transfer tape over the crystals to hold them in place. Then place Teflon over tape and iron.
M I N I P R O J E C T S 1 4 / 1 4 C R E A T E - Y O U R - S T Y L E . C O M
Halloween Drink Protector
Swarovski crystals
Product Group Article No. Amount Size Color Color Code
Beads 5328 160 pcs 3mm Crystal Light Chrome 001 LTCH
Beads 5328 1 pc 4mm Jet 280
Beads 5050 1 pc 22x16mm Jet 280
Beads 5728 1 pc 12mm Crystal Metallic Sunshine 001 METSH
Pave Balls 86001 1 pc 10mm Jet 280
Supplies:
40” 20 gauge black artistic wire
24” 20 gauge orange artistic wire
1 Spider Coffee Mug
1 2” black head pin
Instructions
Step 1: To make the legs of the spider. Cut the black wire into eight 5” pieces. At one end of the wire (using a round nose
plier) twist the wire around twice to create a small curl. Slide on twenty 5328 3mm crystal light chrome bicones and
set aside. Repeat 7 more times and set aside.
Step 2: To make the body of the spider, use the head pin and slide on one 5328 4mm jet bicone and one 5050 22mm jet
oval bead. Now begin wiring each leg (left, then right, then left) to the headpin right above the oval bead. Trim off
excess wire with each leg attached. After the 8th leg is attached slide on the jet Pave Ball and push down to make
leg wraps secure. Now with the round nose pliers turn the end of the headpin twice to make the hole spider secure.
Step 3: To create the web creatively wrap the orange wire around the handle of the cup and weave back and forth to make
a web. Then attach the right front leg and back left leg of the spider to the web. Finally attach a piece of wire to the
scarab bead and attach the bead to the web.