Upload
buitram
View
218
Download
5
Embed Size (px)
Citation preview
Best Handling Technology GmbH – Ludwig-Rinn-Straße 10 - D- 35452 Heuchelheim
Tel.: +49 (0) 641 132 70 863 – Fax.: +49 (0) 641 132 70 865
www.besthandlingtechnology.com - [email protected]
Sack handling is a common problem for a lot of industries. Best handling Technology have
developed a wealth of knowledge over 15 years that is unrivalled in the world of vacuum
lifting.
Handling Systems for sacks
Sack Lifting Solutions
Vacuum Lifter - lifting 25kg sacks
Vacuum Lifter- Lifting plastic sacks
Vacuum Lifter - with flexible extended
handle feature for high reach
When sacks have to be handled for
processing and production, our vacuum
lifting systems perform this operation in
a safe, efficient and cost effective
manner in the most demanding of
environments.
Operators no longer have to endure the
backbreaking effort involved in
repetitive lifting. Total control by one
person gives effortless vacuum powered
lifting
Best Handling Technology GmbH has the
answer for all type of paper, plastic and
hessian sack handling applications with
weights ranging from 5-110 kg catered
for. If speed is a factor, the operator can
maintain throughputs of 6-9 sacks per
minute (depending on the area covered).
The benefits of our lifters include
effortless lifting, increased productivity,
increased operator safety and
performance. All giving you a low
maintenance, high efficiency system.
Vacuum Lifter - with spike gripper
feature
Vacuum Lifter with extended handle
Vacuum Lifter - handling paper sacks
Best Handling Technology GmbH – Ludwig-Rinn-Straße 10 - D- 35452 Heuchelheim
Tel.: +49 (0) 641 132 70 863 – Fax.: +49 (0) 641 132 70 865
www.besthandlingtechnology.com - [email protected]
Example of typical vacuum tube lifter layout showing swing jib crane mounting.
Support Options ezzLINK
Support gantry
Vacuum pump
Vacuum supply hose
Vacuum relief valve
Vacuum relief valve
adjustment screw
„Clean side“ filter
outlet
Cartridge Filter
Floor fixing
„Dirty side“ filter
inlet
Hose Trolley c/w
cable ties
Load trolley
Vacuumlifter
Assembly
Suction foot
„H“ Style – used for covering large working
areas. Supported from either floors mounted
support pillars or existing structural steel work.
Compact column-mounted jib crane. Ideal for low
headroom situations.
Reach 2-5m
Overhead Stanchion and wall mounted. Fitted with swing,
inverted or knuckle jib. Reach: 2m - 5m