HARDWARE LOCATIONS ON DE LA FONTAINE FRAMES

TOP OF FRAME TO TOP OF HINGE BOTTOM FRAME TO CENTER OF STRIKE1ST HINGE 2ND HINGE 3RD HINGE 4TH HINGE ASA DEADBOLT

HEIGHT A B C D E F

6/8 7-1/2" 37-7/16" 67-3/8" -- 40-5/16" 48"

7/0 7-1/2" 39-7/16" 71-3/8" -- 40-5/16" 48"

8/0 7-1/2" 32-51/64" 58-3/32" 83-25/64" 40-5/16" 48"

8/4 7-1/2" 34-1/8" 60-3/4" 87-3/8" 40-5/16" 48"

6/8 DUTCH 7-1/2" 24-1/16" 43-1/2" 67-3/8" 36-5/8" 52"

7/0 DUTCH 7-1/2" 28-1/16" 47-1/2" 71-3/8" 36-5/8" 52"

D

C

B

A

EF

4-1/2" HINGE ASA STRIKE DEADBOLTSTRIKE

GENERAL ORDERING INFORMATION

MATERIALSR series masonry frames - 16 or 14 GA - A40 unprimed paintable galvanneal steelDW series drywall frames - 16 GA - A40 unprimed paintable galvanneal steel

FRAME SIZESpecify nominal door opening size - Width x Height (example 3/0 x 7/0)

HANDING See commercial door & frame handing chart below

ANCHOR TYPEAll SR series masonry frames are supplied with wire masonry anchors standard, other options are available.

All DW series frames are supplied with compression anchor at the top of frame, and screwed base dimple anchor at the bottom of frame (on face) - drywall screw fasteners supplied by others

FIRE LABELAll 3 piece knock down standard SR series masonry and DW series drywall frames include a 3 hour embossed label. This does not include closer reinforcement (see labor page 8). If an applied fire label is required, please specify rating.

INSIDE

RHRIGHT HAND

RIGHT HAND LEFT HANDACTIVE ACTIVE

RIGHT HANDRIGHT HAND LEFT HANDRHRB

REVERSE BEVELREVERSE BEVEL REVERSE BEVEL

ACTIVE ACTIVEREVERSE BEVEL

LHLEFT HAND

LEFT HANDLHRB

INSIDE INSIDE

PAIRS OF DOORS

INDICATES KEY SIDE

SINGLE DOORS

DOOR HANDING CHART

INSIDEINSIDE

INSIDE

INSIDEINSIDE