48
Concealed Fixing Accessories on Stylish Slim Plates 77C R22 BC-B 71C R23 PB-W 72C T22 79C DPN AB-B 74C 1XTM SS-W 78C SPN BK-B Hartland CFX ® fashion, finish, function and flexibility 200 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14 Slim and stylish with soft rounded edges, the Hartland CFX ® range helps provide the finishing touch to any project. The face plates are firmly held in place to the back frame with a patented 4 point clipping system, concealing the fixings for a seamless finish. Six superb finishes Choice of complementary switch insert finishes Concealed fixing Comprehensive range of electrical accessories Grid Fix and Euro Fix options are also available (see separate GRID-IT and EuroFix sections)

HartlandCFX13 11:Layout 1 6/1/14 10:24 ... - Hamilton-litestat · ConcealedFixingAccessoriesonStylishSlimPlates 77CR22BC-B 71CR23PB-W 72CT22 79CDPNAB-B 74C1XTMSS-W 78CSPNBK-B Hartland

Embed Size (px)

Citation preview

Concealed Fixing Accessories on Stylish Slim Plates

77C R22 BC-B

71C R23 PB-W

72C T22

79C DPN AB-B

74C 1XTM SS-W

78C SPN BK-B

Hartland CFX®

fashion, finish, function and flexibility

200 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

Slim and stylish with soft rounded edges, the Hartland CFX® range helpsprovide the finishing touch to any project. The face plates are firmly held inplace to the back frame with a patented 4 point clipping system, concealingthe fixings for a seamless finish.

� Six superb finishes

� Choice of complementary switch insert finishes

� Concealed fixing

� Comprehensive range of electrical accessories

� Grid Fix and Euro Fix options are also available(see separate GRID-IT and EuroFix sections)

HartlandCFX13_11:Layout 1 6/1/14 10:24 Page 1

1 gang 10AX 2 gang 10AX 3 gang 10AX 4 gang 10AX 6 gang 10AX2 way Rocker 2 way Rocker 2 way Rocker 2 way Rocker 2 way RockerNominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm 86 x 86 mm 145 x 86 mm 145 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 25 mm Depth: 25 mm Depth: 25 mm Depth: 25 mm Depth 25 mm

Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertSurround Reference: R21 Reference: R22 Reference: R23 Reference: R24 Reference: R26

Plate Finish Insert Finish Colour Product Code Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome White 77C R21 BC-W 77C R22 BC-W 77C R23 BC-W 77C R24 BC-W 77C R26 BC-WBright Chrome Black 77C R21 BC-B 77C R22 BC-B 77C R23 BC-B 77C R24 BC-B 77C R26 BC-B

Polished Brass Polished Brass White 71C R21 PB-W 71C R22 PB-W 71C R23 PB-W 71C R24 PB-W 71C R26 PB-WPolished Brass Black 71C R21 PB-B 71C R22 PB-B 71C R23 PB-B 71C R24 PB-B 71C R26 PB-B

Satin Brass Satin Brass White 72C R21 SB-W 72C R22 SB-W 72C R23 SB-W 72C R24 SB-W 72C R26 SB-WSatin Brass Black 72C R21 SB-B 72C R22 SB-B 72C R23 SB-B 72C R24 SB-B 72C R26 SB-B

Antique Brass Antique Brass Black 79C R21 AB-B 79C R22 AB-B 79C R23 AB-B 79C R24 AB-B 79C R26 AB-B

Satin Stainless Effect Satin Stainless White 74C R21 SS-W 74C R22 SS-W 74C R23 SS-W 74C R24 SS-W 74C R26 SS-WSatin Stainless Black 74C R21 SS-B 74C R22 SS-B 74C R23 SS-B 74C R24 SS-B 74C R26 SS-B

Black Nickel Black Nickel Black 78C R21 BK-B 78C R22 BK-B 78C R23 BK-B 78C R24 BK-B 78C R26 BK-B

Concealed Fixing Rocker Switches

Hartland CFX®

77C R26 BC-W

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 201

Hartland CFX R21 is a UK Registered Design Certificate No. 302446 Hartland CFX R21 is a Chinese Registered Design Certificate No. 605758Hartland CFX SS2 is a UK Registered Design Certificate No. 302445 Hartland CFX SS2 is a Chinese Registered Design Certificate No. 659289

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:24 Page 2

1 gang 10AXPush To Make/

1 gang 10AX 2 gang 10AX Break 1 gang 10AIntermediate Intermediate Retractive Triple PoleRocker Rocker Rocker RockerNominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm 86 x 86 mm 86 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 25 mm Depth: 25 mm Depth: 25 mm Depth: 25 mm

Insert Technical Insert Technical Insert Technical Insert Technical InsertSurround Reference: R31 Reference: R32 Reference: CFXRRT Reference: TP

Plate Finish Insert Finish Colour Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome White 77C R31 BC-W 77C R32 BC-W 77C RRT BC-W –Bright Chrome Black 77C R31 BC-B 77C R32 BC-B 77C RRT BC-B –White Plastic White – – – 77C TP WH-WBlack Plastic Black – – – 77C TP BL-B

Polished Brass Polished Brass White 71C R31 PB-W 71C R32 PB-W 71C RRT PB-W –Polished Brass Black 71C R31 PB-B 71C R32 PB-B 71C RRT PB-B –White Plastic White – – – 71C TP WH-WBlack Plastic Black – – – 71C TP BL-B

Satin Brass Satin Brass White 72C R31 SB-W 72C R32 SB-W 72C RRT SB-W –Satin Brass Black 72C R31 SB-B 72C R32 SB-B 72C RRT SB-B –White Plastic White – – – 72C TP WH-WBlack Plastic Black – – – 72C TP BL-B

Antique Brass Antique Brass Black 79C R31 AB-B 79C R32 AB-B 79C RRT AB-B –Black Plastic Black – – – 79C TP BL-B

Satin Stainless Effect Satin Stainless White 74C R31 SS-W 74C R32 SS-W 74C RRT SS-W –Satin Stainless Black 74C R31 SS-B 74C R32 SS-B 74C RRT SS-B –White Plastic White – – – 74C TP WH-WBlack Plastic Black – – – 74C TP BL-B

Black Nickel Black Nickel Black 78C R31 BK-B 78C R32 BK-B 78C RRT BK-B –Black Plastic Black – – – 78C TP BL-B

Concealed Fixing Rocker Switches

74C R32 SS-B

Hartland CFX®

202 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

HartlandCFX13_11:Layout 1 6/1/14 10:24 Page 3

1 gang 20AX 2 gang 20AX1 gang 20AX 2 gang 20AX 3 gang 20AX 4 gang 20AX Intermediate Intermediate2 way Rocker 2 way Rocker 2 way Rocker 2 wayRocker Rocker RockerNominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm Size: 145 x 86 mm Size: 145 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 25 mm Depth: 25 mm Depth: 25 mm Depth: 25 mm Depth: 25 mm Depth 25 mm

Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertSurround Reference: R212 Reference: R222 Reference: R232 Reference: R242 Reference: R312 Reference: R322

Plate Finish Insert Finish Colour Product Code Product Code Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome White 77C R212 BC-W 77C R222 BC-W 77C R232 BC-W 77C R242 BC-W 77C R312 BC-W 77C R322 BC-WBright Chrome Black 77C R212 BC-B 77C R222 BC-B 77C R232 BC-B 77C R242 BC-B 77C R312 BC-B 77C R322 BC-B

Polished Brass Polished Brass White 71C R212 PB-W 71C R222 PB-W 71C R232 PB-W 71C R242 PB-W 71C R312 PB-W 71C R322 PB-WPolished Brass Black 71C R212 PB-B 71C R222 PB-B 71C R232 PB-B 71C R242 PB-B 71C R312 PB-B 71C R322 PB-B

Satin Brass Satin Brass White 72C R212 SB-W 72C R222 SB-W 72C R232 SB-W 72C R242 SB-W 72C R312 SB-W 72C R322 SB-WSatin Brass Black 72C R212 SB-B 72C R222 SB-B 72C R232 SB-B 72C R242 SB-B 72C R312 SB-B 72C R322 SB-B

Antique Brass Antique Brass Black 79C R212 AB-B 79C R222 AB-B 79C R232 AB-B 79C R242 AB-B 79C R312 AB-B 79C R322 AB-B

Satin Stainless Effect Satin Stainless White 74C R212 SS-W 74C R222 SS-W 74C R232 SS-W 74C R242 SS-W 74C R312 SS-W 74C R322 SS-WSatin Stainless Black 74C R212 SS-B 74C R222 SS-B 74C R232 SS-B 74C R242 SS-B 74C R312 SS-B 74C R322 SS-B

Black Nickel Black Nickel Black 78C R212 BK-B 78C R222 BK-B 78C R232 BK-B 78C R242 BK-B 78C R312 BK-B 78C R322 BK-B

72C R242 SB-B

Hartland CFX®

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 203

Concealed Fixing Rocker Switches

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:24 Page 4

1 gang 2 gang 3 gang 4 gang 1 gang 20AX20AX 2 way 20AX 2 way 20AX 2 way 20AX 2 way IntermediateToggle Toggle Toggle Toggle ToggleNominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm 145 x 86 mm 145 x 86 mm 86 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm Depth: 35 mm Depth: 35 mm Depth 35 mm

Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertReference: T21 Reference: T22 Reference: T23 Reference: T24 Reference: T31

Plate Finish Insert Finish Product Code Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome 77C T21 77C T22 77C T23 77C T24 77C T31

Polished Brass Polished Brass 71C T21 71C T22 71C T23 71C T24 71C T31

Satin Brass Satin Brass 72C T21 72C T22 72C T23 72C T24 72C T31

Antique Brass Antique Brass 79C T21 79C T22 79C T23 79C T24 79C T31

Satin Stainless Effect Satin Stainless 74C T21 74C T22 74C T23 74C T24 74C T31

Black Nickel Black Nickel 78C T21 78C T22 78C T23 78C T24 78C T31

Concealed Fixing Toggle Switches

Hartland CFX®

74C T23

204 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 5

1 gang 12-24VAC/DC +/-10%

1 gang On/Off with10A (6AX) Blue LEDOn/Off with Locator (SuitableBlue LED for KNX BUSLocator System)Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm

Min. Wall Box Min. Wall BoxDepth: 35 mm Depth 35 mm

Insert Technical Insert Technical InsertSurround Reference: C11 Reference: CKNX

Plate Finish Insert Finish Colour Product Code Product Code

Bright Chrome Bright Chrome White 77C C11 BC-W 77C CKNX BC-WBright Chrome Black 77C C11 BC-B 77C CKNX BC-B

Polished Brass Polished Brass White 71C C11 PB-W 71C CKNX PB-WPolished Brass Black 71C C11 PB-B 71C CKNX PB-B

Satin Brass Satin Brass White 72C C11 SB-W 72C CKNX SB-WSatin Brass Black 72C C11 SB-B 72C CKNX SB-B

Antique Brass Antique Brass Black 79C C11 AB-B 79C CKNX AB-B

Satin Stainless Effect Satin Stainless White 74C C11 SS-W 74C CKNX SS-WSatin Stainless Black 74C C11 SS-B 74C CKNX SS-B

Black Nickel Black Nickel Black 78C C11 BK-B 78C CKNX BK-B

Hartland CFX®

Concealed Fixing Hotel Card Switch with LEDAdjustable Time Delay 10 seconds - 5 minutes. Suitable for 44 mm and 54 mm width hotel Key Cards.

71C CKNX PB-B

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 205

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 6

1 gang 13A 2 gang 13A ShaverDouble Pole Double Pole 1 gang 2A 1 gang 5A 1 gang 13A 2 gang 13A Dual VoltageSwitched Switched Unswitched Unswitched Unswitched Unswitched UnswitchedSocket Socket Socket Socket Socket Socket SocketNominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 145 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 X 86 mm Size: 145 x 86 mm Size: 86 x 145 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm Depth: 35 mm Depth: 35 mm Depth 35 mm Depth 35 mm Depth 47 mm

Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertSurround Reference: SS1 Reference: SS2 Reference: US2 Reference: US5 Reference: US13 Reference: US99 Reference: SHS

Plate Finish Insert Finish Colour Product Code Product Code Product Code Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome White 77C SS1 BC-W 77C SS2 BC-W – – – – –Bright Chrome Black 77C SS1 BC-B 77C SS2 BC-B – – – – –White Plastic White – – 77C US2 W 77C US5 W 77C US13 W 77C US99 W 77C SHS WBlack Plastic Black – – 77C US2 B 77C US5 B 77C US13 B 77C US99 B 77C SHS B

Polished Brass Polished Brass White 71C SS1 PB-W 71C SS2 PB-W – – – – –Polished Brass Black 71C SS1 PB-B 71C SS2 PB-B – – – – –White Plastic White – – 71C US2 W 71C US5 W 71C US13 W 71C US99 W 71C SHS WBlack Plastic Black – – 71C US2 B 71C US5 B 71C US13 B 71C US99 B 71C SHS B

Satin Brass Satin Brass White 72C SS1 SB-W 72C SS2 SB-W – – – – –Satin Brass Black 72C SS1 SB-B 72C SS2 SB-B – – – – –White Plastic White – – 72C US2 W 72C US5 W 72C US13 W 72C US99 W 72C SHS WBlack Plastic Black – – 72C US2 B 72C US5 B 72C US13 B 72C US99 B 72C SHS B

Antique Brass Antique Brass Black 79C SS1 AB-B 79C SS2 AB-B – – – – –Black Plastic Black – – 79C US2 B 79C US5 B 79C US13 B 79C US99 B 79C SHS B

Satin Stainless Satin Stainless White 74C SS1 SS-W 74C SS2 SS-W – – – – –Effect Satin Stainless Black 74C SS1 SS-B 74C SS2 SS-B – – – – –

White Plastic White – – 74C US2 W 74C US5 W 74C US13 W 74C US99 W 74C SHS WBlack Plastic Black – – 74C US2 B 74C US5 B 74C US13 B 74C US99 B 74C SHS B

Black Nickel Black Nickel Black 78C SS1 BK-B 78C SS2 BK-B – – – – –Black Plastic Black – – 78C US2 B 78C US5 B – – 78C SHS B

Hartland CFX®

Concealed Fixing Power Sockets

78C SS1 BK-B

206 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 7

1 gang 20AX1 gang 2 way Key20AX 2 way Switch “EMGKey Switch LTG TEST”Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm

Min. Wall Box Min. Wall BoxDepth: 25 mm Depth 25 mm

Technical Insert Technical InsertReference: K21 Reference: KEL

Plate Finish Insert Colour Product Code Product Code

Bright Chrome White Plastic 77C K21 W 77C KEL WBlack Plastic 77C K21 B 77C KEL B

Polished Brass White Plastic 71C K21 W 71C KEL WBlack Plastic 71C K21 B 71C KEL B

Satin Brass White Plastic 72C K21 W 72C KEL WBlack Plastic 72C K21 B 72C KEL B

Antique Brass Black Plastic 79C K21 B 79C KEL B

Satin Stainless Effect White Plastic 74C K21 W 74C KEL WBlack Plastic 74C K21 B 74C KEL B

Black Nickel Black Plastic 78C K21 B 78C KEL B

Concealed Fixing Key Switches

Hartland CFX®

77C KEL W

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 207

7-CRANGE

2 gang 13AUnswitched Socket+ 2 x USBCharging PointsNominal Plate Size:144 x 86 mmMin. Wall BoxDepth: 35 mmTechnical InsertReference: USB99

Plate Finish Insert Colour Product Code

Bright Chrome White Plastic 77C USB99 WBlack Plastic 77C USB99 B

Polished Brass White Plastic 71C USB99 WBlack Plastic 71C USB99 B

Satin Brass White Plastic 72C USB99 WBlack Plastic 72C USB99 B

Antique Brass Black Plastic 79C USB99 B

Satin Stainless Effect White Plastic 74C USB99 WBlack Plastic 74C USB99 B

Black Nickel Black Plastic 78C USB99 B

Concealed Fixing USB Power Sockets

72C USB99 B

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 8

2 gang1 gang Isolated 1 gang Non IsolatedNon Isolated TV/FM Isolated TV + 1 gang 1 gangTV Diplexer TV Satellite Non Isolated Isolated1 In/1 Out 1 In/2 Out 1 In/1 Out 2 In/2 Out Satellite SatelliteNominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 25 mm Depth: 25 mm Depth: 25 mm Depth: 35 mm Depth 35 mm Depth 35 mm

Technical Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertReference: TV Reference: TVFM Reference: TVI Reference: TVSAT Reference: SATN Reference: SATI

Plate Finish Insert Colour Product Code Product Code Product Code Product Code Product Code Product Code

Bright Chrome White Plastic 77C TV W 77C TVFM W 77C TVI W 77C TVSAT W 77C SATN W 77C SATI WBlack Plastic 77C TV B 77C TVFM B 77C TVI B 77C TVSAT B 77C SATN B 77C SATI B

Polished Brass White Plastic 71C TV W 71C TVFM W 71C TVI W 71C TVSAT W 71C SATN W 71C SATI WBlack Plastic 71C TV B 71C TVFM B 71C TVI B 71C TVSAT B 71C SATN B 71C SATI B

Satin Brass White Plastic 72C TV W 72C TVFM W 72C TVI W 72C TVSAT W 72C SATN W 72C SATI WBlack Plastic 72C TV B 72C TVFM B 72C TVI B 72C TVSAT B 72C SATN B 72C SATI B

Antique Brass Black Plastic 79C TV B 79C TVFM B 79C TVI B 79C TVSAT B 79C SATN B 79C SATI B

Satin Stainless Effect White Plastic 74C TV W 74C TVFM W 74C TVI W 74C TVSAT W 74C SATN W 74C SATI WBlack Plastic 74C TV B 74C TVFM B 74C TVI B 74C TVSAT B 74C SATN B 74C SATI B

Black Nickel Black Plastic 78C TV B 78C TVFM B 78C TVI B 78C TVSAT B 78C SATN B 78C SATI B

Hartland CFX®

Concealed Fixing Television Coaxial Sockets

79C TVFM B

208 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 9

Non Isolated Non IsolatedNon Isolated TV/FM/ TV/FM/ Satellite 1/TV/FM/ Satellite 1/ Satellite 2Satellite 1 gang 1 gang 1 gang Satellite 2 QuadplexerTriplexer Non Isolated Non Isolated Non Isolated Quadplexer 2 In/4 Out1 In/3 Out TV (Female) TV (Male) Satellite 2 In/4 Out + TVF + TCSNominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 145 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm Depth: 35 mm Depth: 35 mm Depth 35 mm Depth 35 mm

Technical Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertReference: DTRID Reference: DTVF Reference: DTVM Reference: DSAT Reference: DENT Reference: DSAT+

Plate Finish Insert Colour Product Code Product Code Product Code Product Code Product Code Product Code

Bright Chrome White Plastic 77C DTRID W 77C DTVF W 77C DTVM W 77C DSAT W 77C DENT W 77C DSAT+ WBlack Plastic 77C DTRID B 77C DTVF B 77C DTVM B 77C DSAT B 77C DENT B 77C DSAT+ B

Polished Brass White Plastic 71C DTRID W 71C DTVF W 71C DTVM W 71C DSAT W 71C DENT W 71C DSAT+ WBlack Plastic 71C DTRID B 71C DTVF B 71C DTVM B 71C DSAT B 71C DENT B 71C DSAT+ B

Satin Brass White Plastic 72C DTRID W 72C DTVF W 72C DTVM W 72C DSAT W 72C DENT W 72C DSAT+ WBlack Plastic 72C DTRID B 72C DTVF B 72C DTVM B 72C DSAT B 72C DENT B 72C DSAT+ B

Antique Brass Black Plastic 79C DTRID B 79C DTVF B 79C DTVM B 79C DSAT B 79C DENT B 79C DSAT+ B

Satin Stainless Effect White Plastic 74C DTRID W 74C DTVF W 74C DTVM W 74C DSAT W 74C DENT W 74C DSAT+ WBlack Plastic 74C DTRID B 74C DTVF B 74C DTVM B 74C DSAT B 74C DENT B 74C DSAT+ B

Black Nickel Black Plastic 78C DTRID B 78C DTVF B 78C DTVM B 78C DSAT B 78C DENT B 78C DSAT+ B

Hartland CFX®

Concealed Fixing Digital Television Sockets - Screened Non Isolated - DAB Compatible

74C DTRID W

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 209

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 10

1 gang 1 gang 1 gang 2 gang 1 gang RJ45 2 gang RJ45Telephone Telephone RJ12 Outlet RJ12 Outlet CAT 5E Outlet CAT 5E OutletMaster Slave Unshielded Unshielded Unshielded UnshieldedNominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm Size: 86 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 25 mm Depth: 25 mm Depth: 35 mm Depth: 35 mm Depth 35 mm Depth 35 mm

Technical Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertReference: TCM Reference: TCS Reference: J12 Reference: 2J12 Reference: J45 Reference: 2J45

Plate Finish Insert Colour Product Code Product Code Product Code Product Code Product Code Product Code

Bright Chrome White Plastic 77C TCM W 77C TCS W 77C J12 W 77C 2J12 W 77C J45 W 77C 2J45 WBlack Plastic 77C TCM B 77C TCS B 77C J12 B 77C 2J12 B 77C J45 B 77C 2J45 B

Polished Brass White Plastic 71C TCM W 71C TCS W 71C J12 W 71C 2J12 W 71C J45 W 71C 2J45 WBlack Plastic 71C TCM B 71C TCS B 71C J12 B 71C 2J12 B 71C J45 B 71C 2J45 B

Satin Brass White Plastic 72C TCM W 72C TCS W 72C J12 W 72C 2J12 W 72C J45 W 72C 2J45 WBlack Plastic 72C TCM B 72C TCS B 72C J12 B 72C 2J12 B 72C J45 B 72C 2J45 B

Antique Brass Black Plastic 79C TCM B 79C TCS B 79C J12 B 79C 2J12 B 79C J45 B 79C 2J45 B

Satin Stainless Effect White Plastic 74C TCM W 74C TCS W 74C J12 W 74C 2J12 W 74C J45 W 74C 2J45 WBlack Plastic 74C TCM B 74C TCS B 74C J12 B 74C 2J12 B 74C J45 B 74C 2J45 B

Black Nickel Black Plastic 78C TCM B 78C TCS B 78C J12 B 78C 2J12 B 78C J45 B 78C 2J45 B

Hartland CFX®

Concealed Fixing Telephone and Data Outlets

77C J12 W

210 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 11

45A1 gang 45A Double Pole

1 gang 20AX Double Pole Red Rocker +Double Pole Red Rocker + Neon + 13ARocker + Neon Neon Switched SocketNominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm Size: 145 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 25 mm Depth: 35 mm Depth: 35

Insert Technical Insert Technical Insert Technical InsertSurround Reference: DPN Reference: 45N Reference: 45SS1

Plate Finish Insert Finish Colour Product Code Product Code Product Code

Bright Chrome Bright Chrome White 77C DPN BC-W – 77C 45SS1 BC-WBright Chrome Black 77C DPN BC-B – 77C 45SS1 BC-BRed Plastic White – 77C 45N W –Red Plastic Black – 77C 45N B –

Polished Brass Polished Brass White 71C DPN PB-W – 71C 45SS1 PB-WPolished Brass Black 71C DPN PB-B – 71C 45SS1 PB-BRed Plastic White – 71C 45N W –Red Plastic Black – 71C 45N B –

Satin Brass Satin Brass White 72C DPN SB-W – 72C 45SS1 SB-WSatin Brass Black 72C DPN SB-B – 72C 45SS1 SB-BRed Plastic White – 72C 45N W –Red Plastic Black – 72C 45N B –

Antique Brass Antique Brass Black 79C DPN AB-B – 79C 45SS1 AB-BRed Plastic Black – 79C 45N B –

Satin Stainless Effect Satin Stainless White 74C DPN SS-W – 74C 45SS1 SS-WSatin Stainless Black 74C DPN SS-B – 74C 45SS1 SS-BRed Plastic White – 74C 45N W –Red Plastic Black – 74C 45N B –

Black Nickel Black Nickel Black 78C DPN BK-B – 78C 45SS1 BK-BRed Plastic Black – 78C 45N B –

Hartland CFX®

Concealed Fixing Double Pole Switches

72C DPN SB-B

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 211

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 12

1 gang 13A 1 gang 13ADouble Pole Fuse withFused Spur+ Neon Red Neon HaloNominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm

Min. Wall Box Min. Wall BoxDepth: 35 mm Depth 35 mm

Insert Technical Insert Technical InsertSurround Reference: SPN Reference: FN

Plate Finish Insert Finish Colour Product Code Product Code

Bright Chrome Bright Chrome White 77C SPN BC-W –Bright Chrome Black 77C SPN BC-B –Bright Chrome Red Neon – 77C FN BC-R

Polished Brass Polished Brass White 71C SPN PB-W –Polished Brass Black 71C SPN PB-B –Polished Brass Red Halo – 71C FN PB-R

Satin Brass Satin Brass White 72C SPN SB-W –Satin Brass Black 72C SPN SB-B –Satin Brass Red Halo – 72C FN SB-R

Antique Brass Antique Brass Black 79C SPN AB-B _Antique Brass Red Halo – 79C FN AB-R

Satin Stainless Effect Satin Stainless White 74C SPN SS-W –Satin Stainless Black 74C SPN SS-B –Satin Stainless Red Halo – 74C FN SS-R

Black Nickel Black Nickel Black 78C SPN BK-B –Black Nickel Red Halo – 78C FN BK-R

Concealed Fixing Connection Units

Hartland CFX®

78C SPN BK-B

212 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 13

2 gang 400W 4 gang 400W2 way Dimmer 2 way Dimmer

1 gang 400W (Max. 300 watts 3 gang 400W (Max. 300 watts 1 gang 600W 1 gang 1000W2 way Dimmer per gang) 2 way Dimmer per gang) 2 way Dimmer 2 way DimmerNominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm Size: 145 x 86 mm Size: 145 x 86 mm Size: 86 x 86 mm Size: 145 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm Depth: 35 mm Depth: 35 mm Depth 35 mm Depth 35 mm

Technical Insert Technical Insert Technical Insert Technical Insert Technical Insert Technical InsertReference: 1X40 Reference: 2X40 Reference: 3X40 Reference: 4X40 Reference: 1X60 Reference: 1X1K

Plate Finish Insert Finish Product Code Product Code Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome 77C 1X40 77C 2X40 77C 3X40 77C 4X40 77C 1X60 77C 1X1K

Polished Brass Polished Brass 71C 1X40 71C 2X40 71C 3X40 71C 4X40 71C 1X60 71C 1X1K

Satin Brass Satin Brass 72C 1X40 72C 2X40 72C 3X40 72C 4X40 72C 1X60 72C 1X1K

Antique Brass Antique Brass 79C 1X40 79C 2X40 79C 3X40 79C 4X40 79C 1X60 79C 1X1K

Satin Stainless Effect Satin Stainless 74C 1X40 74C 2X40 74C 3X40 74C 4X40 74C 1X60 74C 1X1K

Black Nickel Black Nickel 78C 1X40 78C 2X40 78C 3X40 78C 4X40 78C 1X60 78C 1X1K

Hartland CFX®

Concealed Fixing Leading Edge Push On/Off Resistive DimmersNote: Tungsten filament GU10 lamps must be branded and with a fused base. Note: When using mains voltage halogen lamps - dimmers should be de-rated by 25%.Note: When dimming LED lamps de-rate by 75% - please contact our Technical Department for compatibility.

79C 3X40

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 213

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 14

Hartland CFX®

1 gang 200VA 1 gang 300VA2 way Dimmer 2 way DimmerNominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm

Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm

Technical Insert Technical InsertReference: 1X2V Reference: 1X3V

Plate Finish Insert Finish Product Code Product Code

Bright Chrome Bright Chrome 77C 1X2V 77C 1X3V

Polished Brass Polished Brass 71C 1X2V 71C 1X3V

Satin Brass Satin Brass 72C 1X2V 72C 1X3V

Antique Brass Antique Brass 79C 1X2V 79C 1X3V

Satin Stainless Effect Satin Stainless 74C 1X2V 74C 1X3V

Black Nickel Black Nickel 78C 1X2V 78C 1X3V

Concealed Fixing Leading Edge Push On/Off Inductive Dimmers

77C 1X2V

214 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

Note: When dimming LED lamps de-rate by 75% - please contact our Technical Department for compatibility.

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 15

1 gang 2 gang 3 gang 4 gang250W/210VA 250W/210VA 250W/210VA 250W/210VATrailing Edge Trailing Edge Trailing Edge Trailing EdgeMulti-Way Multi-Way Multi-Way Multi-WayDimmer Dimmer Dimmer DimmerNominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm 145 x 86 mm 145 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm Depth: 35 mm Depth: 35 mm

Technical Insert Technical Insert Technical Insert Technical InsertReference: 1XTE Reference: 2XTE Reference: 3XTE Reference: 4XTE

Plate Finish Insert Finish Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome 77C 1XTE 77C 2XTE 77C 3XTE 77C 4XTE

Polished Brass Polished Brass 71C 1XTE 71C 2XTE 71C 3XTE 71C 4XTE

Satin Brass Satin Brass 72C 1XTE 72C 2XTE 72C 3XTE 72C 4XTE

Antique Brass Antique Brass 79C 1XTE 79C 2XTE 79C 3XTE 79C 4XTE

Satin Stainless Effect Satin Stainless 74C 1XTE 74C 2XTE 74C 3XTE 74C 4XTE

Black Nickel Black Nickel 78C 1XTE 78C 2XTE 78C 3XTE 78C 4XTE

Hartland CFX®

Concealed Fixing Trailing Edge Push On/Off DimmersNote: Tungsten filament GU10 lamps must be branded and with a fused base. Note: When using mains voltage halogen lamps - dimmers should be de-rated by 25%.Note: When using mains voltage halogen load transformers - maximum rating is 210VA. Note: When dimming LED lamps de-rate by 75% - please contact our Technical Department for compatibility.

71C 2XTE

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 215

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 16

1 gang 2 gang 3 gang 4 gang250W/210VA 250W/210VA 250W/210VA 250W/210VA

250 Trailing Edge Trailing Edge Trailing Edge Trailing EdgeMulti-Way Multi-Way Multi-Way Multi-WayTouch Master Touch Master Touch Master Touch MasterDimmer Dimmer Dimmer DimmerNominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm 145 x 86 mm 145 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm Depth: 35 mm Depth: 35 mm

Insert Technical Insert Technical Insert Technical Insert Technical InsertSurround Reference: 1XTM Reference: 2XTM Reference: 3XTM Reference: 4XTM

Plate Finish Insert Finish Colour Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome White 77C 1XTM BC-W 77C 2XTM BC-W 77C 3XTM BC-W 77C 4XTM BC-WBright Chrome Black 77C 1XTM BC-B 77C 2XTM BC-B 77C 3XTM BC-B 77C 4XTM BC-B

Polished Brass Polished Brass White 71C 1XTM PB-W 71C 2XTM PB-W 71C 3XTM PB-W 71C 4XTM PB-WPolished Brass Black 71C 1XTM PB-B 71C 2XTM PB-B 71C 3XTM PB-B 71C 4XTM PB-B

Satin Brass Satin Brass White 72C 1XTM SB-W 72C 2XTM SB-W 72C 3XTM SB-W 72C 4XTM SB-WSatin Brass Black 72C 1XTM SB-B 72C 2XTM SB-B 72C 3XTM SB-B 72C 4XTM SB-B

Antique Brass Antique Brass Black 79C 1XTM AB-B 79C 2XTM AB-B 79C 3XTM AB-B 79C 4XTM AB-B

Satin Stainless Effect Satin Stainless White 74C 1XTM SS-W 74C 2XTM SS-W 74C 3XTM SS-W 74C 4XTM SS-WSatin Stainless Black 74C 1XTM SS-B 74C 2XTM SS-B 74C 3XTM SS-B 74C 4XTM SS-B

Black Nickel Black Nickel Black 78C 1XTM BK-B 78C 2XTM BK-B 78C 3XTM BK-B 78C 4XTM BK-B

Hartland CFX®

Concealed Fixing Trailing Edge Touch Master Multi-Way DimmersNote: Tungsten filament GU10 lamps must be branded and with a fused base. Note: When using mains voltage halogen lamps - dimmers should be de-rated by 25%.Note: When using mains voltage halogen load transformers - maximum rating is 210VA. Note: When dimming LED lamps de-rate by 75% - please contact our Technical Department for compatibility.

74C 2XTM SS-W

216 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 17

1 gang Multi-Way 2 gang Multi-Way 3 gang Multi-Way 4 gang Multi-WayTouch Slave Touch Slave Touch Slave Touch SlaveController Controller Controller ControllerNominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm 145 x 86 mm 145 x 86 mm

Min. Wall Box Min. Wall Box Min. Wall Box Min. Wall BoxDepth: 35 mm Depth: 35 mm Depth: 35 mm Depth: 35 mm

Insert Technical Insert Technical Insert Technical Insert Technical InsertSurround Reference: 1XTS Reference: 2XTS Reference: 3XTS Reference: 4XTS

Plate Finish Insert Finish Colour Product Code Product Code Product Code Product Code

Bright Chrome Bright Chrome White 77C 1XTS BC-W 77C 2XTS BC-W 77C 3XTS BC-W 77C 4XTS BC-WBright Chrome Black 77C 1XTS BC-B 77C 2XTS BC-B 77C 3XTS BC-B 77C 4XTS BC-B

Polished Brass Polished Brass White 71C 1XTS PB-W 71C 2XTS PB-W 71C 3XTS PB-W 71C 4XTS PB-WPolished Brass Black 71C 1XTS PB-B 71C 2XTS PB-B 71C 3XTS PB-B 71C 4XTS PB-B

Satin Brass Satin Brass White 72C 1XTS SB-W 72C 2XTS SB-W 72C 3XTS SB-W 72C 4XTS SB-WSatin Brass Black 72C 1XTS SB-B 72C 2XTS SB-B 72C 3XTS SB-B 72C 4XTS SB-B

Antique Brass Antique Brass Black 79C 1XTS AB-B 79C 2XTS AB-B 79C 3XTS AB-B 79C 4XTS AB-B

Satin Stainless Effect Satin Stainless White 74C 1XTS SS-W 74C 2XTS SS-W 74C 3XTS SS-W 74C 4XTS SS-WSatin Stainless Black 74C 1XTS SS-B 74C 2XTS SS-B 74C 3XTS SS-B 74C 4XTS SS-B

Black Nickel Black Nickel Black 78C 1XTS BK-B 78C 2XTS BK-B 78C 3XTS BK-B 78C 4XTS BK-B

Hartland CFX®

Concealed Fixing Touch Slave ControllersNote: To only be used with Touch Master Dimmers Note: Tungsten filament GU10 lamps must be branded and with a fused base.

Note: When using mains voltage halogen lamps - dimmers should be de-rated by 25%. Note: When using mains voltage halogen load transformers - maximum rating is 210VA.

79C 4XTS AB-B

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 217

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 18

218 Hartland is a Registered Trade Mark No. 2344778 CFX is a Registered Trade Mark No. 2398667 Concealed Fixing Patent No. GB 2383375B 01/14

1 gang Grid 2 gang Grid 3 gang Grid 4 gang Gridwith Gasket with Gasket with Gasket with GasketNominal Grid Size: Nominal Grid Size: Nominal Grid Size: Nominal Grid Size:86 x 86 mm 86 x 86 mm 145 x 86 mm 145 x 86 mmTechnical Insert Technical Insert Technical Insert Technical InsertReference: 7C1G Reference: 7C2G Reference: 7C3G Reference: 7C4GProduct Code Product Code Product Code Product Code

7C 1G 7C 2G 7C 3G 7C 4G

1 gang 2 gang 3 gang 4 gangAperture Aperture Aperture ApertureGrid Fix Plate Grid Fix Plate Grid Fix Plate Grid Fix PlateNominal Plate Size: Nominal Plate Size: Nominal Plate Size: Nominal Plate Size:86 x 86 mm 86 x 86 mm 145 x 86 mm 145 x 86 mmTechnical Insert Technical Insert Technical Insert Technical InsertReference: 1GP Reference: 2GP Reference: 3GP Reference: 4GP

Plate Finish Product Code Product Code Product Code Product Code

Bright Chrome 77C 1GP 77C 2GP 77C 3GP 77C 4GP

Polished Brass 71C 1GP 71C 2GP 71C 3GP 71C 4GP

Satin Brass 72C 1GP 72C 2GP 72C 3GP 72C 4GP

Antique Brass 79C 1GP 79C 2GP 79C 3GP 79C 4GP

Satin Stainless Effect 74C 1GP 74C 2GP 74C 3GP 74C 4GP

Black Nickel 78C 1GP 78C 2GP 78C 3GP 78C 4GP

Concealed Fixing GRID-IT Grid Fix Plates complete with Fixing GridMinimum Wall Box Depth dependant on GRID-IT insert fitted - please see the GRID-IT section for our complete range of inserts.

Hartland CFX®

71C 4GP

Spare Grids complete with Gasket

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 19

Single DoubleBlank Plate Blank PlateNominal Plate Nominal PlateSize: 86 x 86 mm Size: 145 x 86 mmTechnical Insert Technical InsertReference: BPS Reference: BPD

Plate Finish Product Code Product Code

Bright Chrome 77C BPS 77C BPD

Polished Brass 71C BPS 71C BPD

Satin Brass 72C BPS 72C BPD

Antique Brass 79C BPS 79C BPD

Satin Stainless Effect 74C BPS 74C BPD

Black Nickel 78C BPS 78C BPD

1 Module 2 Module 3 Module 4 ModuleEuroFix Plate EuroFix Plate Eurofix Plate EuroFix PlateNominal Plate Nominal Plate Nominal Plate Nominal PlateSize: 86 x 86 mm Size: 86 x 86 mm Size: 145 x 86 mm Size: 145 x 86 mm

Aperture: Aperture: Aperture: Aperture:25 x 50 mm 50 x 50 mm 75 x 50 mm 100 x 50 mm

Technical Insert Technical Insert Technical Insert Technical InsertReference: EURO1 Reference: EURO2 Reference: EURO3 Reference: EURO4

Plate Finish Product Code Product Code Product Code Product Code

Bright Chrome 77C EURO1 77C EURO2 77C EURO3 77C EURO4

Polished Brass 71C EURO1 71C EURO2 71C EURO3 71C EURO4

Satin Brass 72C EURO1 72C EURO2 72C EURO3 72C EURO4

Antique Brass 79C EURO1 79C EURO2 79C EURO3 79C EURO4

Satin Stainless Effect 74C EURO1 74C EURO2 74C EURO3 74C EURO4

Black Nickel 78C EURO1 78C EURO2 78C EURO3 78C EURO4

Concealed Fixing Blank Plates

Hartland CFX®

74C BPS

Concealed Fixing EuroFix Platescomplete with Fixing GridMinimum Wall Box Depth is dependent on the EuroFix insert fitted - please see the EuroFix section forour complete range of inserts.

78C EURO3

01/14 Hartland CFX is a Registered Design under Reference Nos. R21 = 3023446, SS2 = 3023445 Designed to fit Folded Metal Wall Box Enclosures that comply with BS 4662:2006 219

7-CRANGE

HartlandCFX13_11:Layout 1 6/1/14 10:25 Page 20

Technical SpecificationRockeR SwitcheS/key SwitcheS

Category:

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 10AX 5 4 1 1 1

earth terminal capacity 10AX 5 4 3 1 1

terminal capacity 20AX 5 4 2 2 1

earth terminal capacity 20AX 6 5 3 2 1

IntermedIate roCker2 Way roCker

120.6mm

Push to make roCker

60.3mm

R21/R212 R22/R222 R23

R24/R242

R26

R31/R312 R32/R322 RRt

GR2woGRR2w

GR212GR312GR21

R232

grId-It sWItCh Inserts Fits 1 Grid-it aperture

Fixing centres:

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDSwitched Poles: SingleContact Gap Minimum: 3mmProduct Class 1: Must be earthedGRID-IT Product Class 1: Face plate

must be earthedAmbient Operating Temperature: -5°to+40°C

Location: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BSEN60669-1

10AX ROCkER SwITCh

Current Rating: 10AXMax Load: 10 Amp inductive

Technical Insert Ref: Description:

R21 1gang10AX2wayRockerR22 2gang10AX2wayRockerR23 3gang10AX2wayRockerR24 4gang10AX2wayRockerR26 6gang10AX2wayRockerR31 1gang10AXIntermediateRockerR32 2gang10AXIntermediateRockerRRT 1gang10AXPushtoMakeRetractiveRockerCFXRRT 1gang10AXPTM/PTBRetractiveRocker

GRID-IT 10AX ROCkER SwITCh MODuLES

GRR2W 1gang10AXRetractive2wayandOffRockerGR21 1gang10AX2wayRockerGRRT 1gang10AXPTM/PTBRetractiveRocker

GRID-IT 20AX ROCkER SwITCh MODuLES

Current Rating: 20AXMax Load: 20 Amp inductive

GR2WO 1gang20AXNon-Retractive2way&OffRockerGR212 1gang20AX2wayRockerGR312 1gang20AXIntermediateRocker

20AX ROCkER SwITCh

Current Rating: 20AXMax Load: 20 Amp inductive

Technical Insert Ref: Description:

R212 1gang20AX2wayRockerR222 2gang20AX2wayRockerR232 3gang20AX2wayRockerR242 4gang20AX2wayRockerR312 1gang20AXIntermediateRockerR322 2gang20AXIntermediateRocker

20AX kEy SwITCh

K21 1gang20AX2wayKeySwitchKEL 1gang20AX2wayKeySwitch

“EMGLTGTEST”

grId-It 20AX kEy SwITCh MODuLE

GK21 1gang20AX2wayKeySwitchGKEL 1gang20AX2wayKeySwitch

“EMGLTGTEST”

Note: ForDoublePoleKeySwitchpleaseseetheDoublePoleSwitchpage.

termInal CaPaCIty:

key sWItCh

k21 keL

EMG LTG

TEST

Gk21

EMG LTG

TEST

GkeL GRRt

cFXRRt

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 373E&OE02/14

Technical SpecificationTOGGLEANDBELLPuSHSWITCHES

t23 t24

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 5 4 2 2 1

earth terminal capacity 6 5 3 2 1

IntermedIate toggle2 Way toggle

120.6mm

double Pole &retraCtIve

60.3mm

bell Push sWItChFixing centres:

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDSwitched Poles: Single*Contact Gap Minimum: 3mmProduct Class 1: Must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: ToggleSwitch BSEN60669-1BellPush BSEN60669-1

20AX TOGGLE SwITCh

Current Rating: 20AXMax Load: 20 Amp inductive

Technical Insert Ref: Description:

T21 1gang20AX2wayToggleT22 2gang20AX2wayToggleT23 3gang20AX2wayToggleT24 4gang20AX2wayToggleT31 1gang20AXIntermediateToggle

T32 2gang20AXIntermediateToggle OnlyavailableintheBloomsburyRange

TDP 1gang20AXDoublePoleToggle *Switched Poles: Double

10AX RETRACTIVE TOGGLE SwITCh

Current Rating: 10AXMax Load: 10 Amp inductive

Technical Insert Ref: Description:

TRT 1gang10AXPushtoMake/Break RetractiveToggle

6amP bell Push sWItCh OnlyavailableintheBloomsburyrange

Current Rating: 6 AmpMax Load: 6 Amp

Technical Insert Ref: Description:

BPM 1gang240VAC6ABellPush

termInal CaPaCIty:

BPM

Category:

t21 t22t21 t31 t32t31 tDP/tRt tDP

t22

t32

t24

t23

182mm

BloomsburyRange

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14374

Technical SpecificationDOuBLEPOLEROCKERSWITCHES/KEySWITCHES

Category:

45amP dP roCker sWItCh20AMP DP ROCkER SwITCh

dP roCker WIth soCket

60.3mmDPNC Cable Outlet size: Min 0.75mm2

Max 2.5mm2

Fixing centres:

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDSwitched Poles: DoubleContact Gap Minimum: 3mmProduct Class 1: Must be earthedGRID-IT Product Class 1: Face plate must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: 20AX/45AmpDoublePoleRocker BSEN60669-1DoublePoleRockerwithSocket BS4177

20AX DOuBLE POLE ROCkER SwITCh

Current Rating: 20AXMax Load: 20 Amp inductive

Technical Insert Ref: Description:

DP 1gang20AXDoublePoleRockerDPN 1gang20AXDoublePoleRocker+NeonDPNC 1gang20AXDoublePoleRocker+Neon +CableOutlet

GRID-IT 20AX DOuBLE POLE ROCkER SwITCh MODuLE

GDP 1gang20AXDoublePoleRocker

GRID-IT 20AX DP kEy SwITCh MODuLE

GKDP 20AXDoublePoleKeySwitch

45 amP double Pole roCker sWItCh

Current Rating: 45 AmpMax Load: 45 Amp

Technical Insert Ref: Description:

45 1gang45ADoublePoleRedRocker45N 1gang45ADoublePoleRedRocker+Neon45V 45ADoublePoleRedRocker+Neon, VerticallyMounted

45 AMP ROCkER SwITCh wITh 13AMP SOCkET

Current Rating: Switch45Amp/Socket13AmpMax Load: Switch45Amp/Socket13Amp

Technical Insert Ref: Description:

45SS1 45ADoublePoleRedRocker+ Neon+13ASwitchedSocket

termInal CaPaCIty:

45 45N

120.6mm

45SS1

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2 10mm2 16mm2

20AX terminal capacity 3 2 1

20AX earth terminal capacity 6 5 3 2 1

45Amp terminal capacity 3 2 1

45Amp earth terminal capacity 3 2 1

GDP/GkDP terminal capacity 5 4 2 1 1

GDP/GkDP earth terminal capacity 6 5 3 2 1

DP DPN DPNC

45VVertically mounted

GkDP

grId-It module Fits 1 Grid-it aperture

GDP

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 375E&OE02/14

Technical SpecificationTRIPLEPOLEFAN ISOLATOR

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 10AX 5 4 1 1 1

earth terminal capacity 5 4 3 1 1

tP

trIPle Pole fan Isolator

60.3mm

Fixing centres:

teChnICal sPeCIfICatIon:

Current Rating: 10 AmpVoltage: 220/250V AcIP Rating: iP2XDMax Load: 10 Amp ResistiveSwitched Poles: tripleContact Gap Minimum: 3mmProduct Class 1: Must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use only

Max Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BSEN60669-1

fan Isolator

Technical Insert Ref: Description:

TP 1gang10ATriplePoleRocker

termInal CaPaCIty:

Category:

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14376

Technical SpecificationhoteL cARD SwitcheS

C11/CKNX

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 3 2 1

earth terminal capacity 5 4 3 1 1

CARD SwITCh/kNX EuROFIX CARD SwITCh/kNX

60.3mm

Fixing centres:

teChnICal sPeCIfICatIon:

Voltage: 220/250V AckNX Voltage: 12-24V Ac/DcIP Rating: iP2XDSwitched Poles: SingleContact Gap Minimum: 3mmProduct Class 1: Must be earthedEurofix Product Class 1: Face plate must be earthed

Ambient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BSEN60669-2-3

hotel Card sWItCh

Current Rating: 10A (6AX)Max Load: 10 Amp (6 Amp inductive)

Technical Insert Ref: Description:

C11 1gang10A(6AX)On/Offwith BlueLEDLocator Suitablefor44mmand54mmwidthkeycards

EuROFIX CARD SwITCh

MOD-C11 1gang10A(6AX)On/Offwith BlueLEDLocator Suitablefor44mmand54mmwidthkeycards

kNX BuS SySTEM hOTEL CARD SwITCh

Current Rating: N/AMax Load: N/A

Technical Insert Ref: Description:

CKNX 1gang12-24VAC/DC+/-10%On/Off withBlueLEDLocator Suitablefor44mmand54mmwidthkeycards

EuROFIX kNX BuS SySTEM CARD SwITCh

MOD-CKNX 1gang12-24VAC/DC+/-10%On/Off withBlueLEDLocator Suitablefor44mmand54mmwidthkeycards

termInal CaPaCIty:

Category:

MoD-c11MOD-CKNX

FitsintooneEuro2

aperture

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 377E&OE02/14

Technical SpecificationSwitcheD SocketS

2.5mm2 4mm2 6mm2

Multi-Strand10mm2

terminal capacity 4 3 2 1

earth terminal capacity 4 3 2 1

60.3mm gridtowallbox49.2mmplatetogrid

120.6mm gridtowallbox106.5mm platetogrid

SS1

SS2

13A SwITChED SOCkETS

120.6mm

grId-It sWItChed soCkets modules

60.3mm

Fixing centres:

teChnICal sPeCIfICatIon:

Current Rating: 13 AmpVoltage: 220/250V AcIP Rating: iP2XDMax Load: 13 AmpSwitched Poles: DoubleContact Gap Minimum: 3mmProduct Class 1: Must be earthedGRID-IT Product Class 1: Face plate must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use only

Max Installation Altitude: 2000mDual Earth: yes

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BS1363-2 Inc.amendment1,2,3ASTA Licence No: 1046(SS1andSS2only)

sWItChed soCkets

Technical Insert Ref: Description:

SS1 1gang13ADoublePoleSwitchedSocketSS2 2gang13ADoublePoleSwitchedSocket

grId-It sWItChed soCkets modules

Technical Insert Ref: Description:

GSS1 1gang13ADoublePoleSwitchedSocketGSS2 2gang13ADoublePoleSwitchedSocket

termInal CaPaCIty:

Category:

GSS1

GSS2

Fixing centres:

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14378

Technical SpecificationuNSWITCHEDSOCKETS

US2

1mm2 1.5mm2 2.5mm2 4mm2 6mm2

Multi-strand10mm2

2A and 5A terminal capacity 5 4 2 1

2A and 5A earth terminal capacity 5 4 2 1

13A terminal capacity 3 3 2 1

13A earth terminal capacity 3 3 2 1

2a & 5a unsWItChed soCkets

120.6mm

13A uNSwITChED SOCkETS

60.3mm

Fixing centres:

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDSwitched Poles: NoneContact Gap Minimum: NoneProduct Class 1: Must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000mShuttered: yes

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: 2Aand5Aunswitched BS54613Aunswitched BS1363-2

2a unsWItChed soCkets and floor soCkets

Current Rating: 2 AmpMax Load: 2 Amp

Technical Insert Ref: Description:

uS2 1gang2AunswitchedSocket

5a unsWItChed soCkets and floor soCkets

Current Rating: 5 AmpMax Load: 5 Amp

Technical Insert Ref: Description:

uS5 1gang5AunswitchedSocket

13A uNSwITChED SOCkETS AND FLOOR SOCkETS

Current Rating: 13 AmpMax Load: 13 Amp

Technical Insert Ref: Description:

uS13 1gang13AunswitchedSocketuS99 2gang13AunswitchedSocket

EuROFIX 13A uk uNSwITChED SOCkET MODuLE

MOD-ENG13A 1gang13AuKunswitchedSocket

termInal CaPaCIty:

Category:

US13

uS99

US5

EuROFIX 13A uNSwITChED soCket module

US13

uS99

US2 US5

MOD-ENG13A

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 379E&OE02/14

Technical SpecificationINTERNATIONALuNSWITCHEDSOCKETS

teChnICal sPeCIfICatIon:

IP Rating: iP2XDSwitched Poles: NoneContact Gap Minimum: NoneProduct Class 1: Face plate must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

Shuttered: yes

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BS5733 iec 60884-1

amerICan soCkets - nema 5

Current Rating: 15 AmpMax Load: 15 AmpVoltage: 110V Ac

Technical Insert Ref: Description:

5258 1gang15AunswitchedAmericanSocket5320 2gang15AunswitchedAmericanSocket

EuROFIX AMERICAN SOCkET MODuLE

MOD-uSAI5A 1gang15AunswitchedAmericanSocket

EuROFIX uNIVERSAL SOCkET MODuLE

Current Rating: 13 AmpMax Load: 13 Amp

MOD-uNI13A 1gang13AuniversalunswitchedSocket

sChuko soCkets - Ce7/4 and floor soCket

Current Rating: 10/16 AmpMax Load: 16 AmpVoltage: 220/250V Ac

Technical Insert Ref: Description:

6126 1gang16AunswitchedGermanSockets 26126 2gang16AunswitchedGermanSockets

EuROFIX GERMAN SOCkET MODuLE

MOD-GER16A 1gang16AunswitchedGermanSocket

Category:

Information relating to usage for non-uk sockets

• Itispermissibletoselland/orinstallnon-uKBStypepowersocketsintheunitedKingdon.• Itistheresponsibilityoftheelectricalcontractor/installertoensurethattheseproductsareinstalledcorrectly.• TheinstallationmustbesignedoffbyaqualifiedinstallerasadeviationtoBS7671wiringregulations.• Astheseproductsfalloutsidethestandardsspecifiedwithinthewiringregulations,additionalmeasuresmustbetakentoensuresafe,appropriateinstallationiseffected.

2.5mm2 4mm2 6mm2 Multi-stranded 10mm2

13Aand16ASocket 3 3 2 1

15AuniversalSocketModule 3 2 1

termInal CaPaCIty:

5258

5320

amerICan soCkets

120.6mm

60.3mm

Fixing centres:

6126*

sChuko soCkets

26126*

sChuko floor soCkets

6126*

soCket modules

MoD-USA MOD-uNIV*

MoD-GeR16A*

*Requires47mmdeepmountingbox

26126*

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14380

Plug Type Rating Country Visual

2-pin plug (Non-Earth)

Type A 2.5A, 250VNorth America (United States) and in many other countries including Canada, Mexico, Guatemala, Jamaica and Venezuela

2-pin plug (Euro) Type C 2.5A, 250VMost countries in continental Europe and also widely used in South Africa

2-pin plug round Type E 10/16A, 250VPrimarily used in France, Belgium, Poland, Slovakia, Czech Republic, Tunisia and Morocco

2-pin plug (Non-Earth)

Type F 10/16A, 250VGermany, Austria, the Netherlands, Sweden, Norway, Finland, Portugal, Spain and Eastern Europe

3-pin plug BS Type G 13A, 250VMainly used in the United Kingdom, Ireland, Cyprus, Malta, Malaysia, Singapore and Hong Kong

3-pin plug round BS Type D 5A, 250VUsed almost exclusively in India, Sri Lanka, Nepal and Nambia

2-pin Australia plug Type H 7.5A, 250V Primarily used in Australia

3-pin Australia plug Type I 10A, 250VMainly used in Australia, New Zealand, Papa New Guinea and Argentina

3-pin Australia plug Type I 15A, 250VMainly used in Australia, New Zealand, Papa New Guinea and Argentina

3-pin China plug Type I 6/10A, 250V China

2-pin China plug Type H 6/10A, 250V China

2-pin US plug Type A 15A, 125VNorth America (United States) and in many other countries including Canada, Mexico, Guatamala, Jamaica and Venezuela

Technical SpecificationPLuGSSuITABLEFORuSEWITHMOD-uNIV13*SOCKETMODuLE

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 381E&OE02/14

Technical SpecificationDUAL VoLtAGe ShAVeR Socket

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 5 4 3 2 1

earth terminal capacity 9 6 4 2 1

ShS

shaver soCket

120.6mmVerticallymounted

Fixing centres:

teChnICal sPeCIfICatIon:

Current Rating: 20VAVoltage: 220/250V AcMax Load Output: 115/230V Max Load Input: 200/250VIP Rating: iP2XDSwitched Poles: NoneContact Gap Minimum: NoneProduct Class 1: Must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use only

Max Installation Altitude: 2000mShuttered: yesBox Depth: 47mm

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BSEN61558 BS4573

shaver soCket

Technical Insert Ref: Description:

SHS ShaverDualVoltageunswitched Socket(VerticallyMounted)

Category:

termInal CaPaCIty:

2 2

2

2

3

ZONE

ZONE

ZONE

ZONE

ZONE

60cm 60cm

60cm radius

75cm

225c

m

1ZONE

Note:Generally,shaversocketswon’thaveanIP(ingressprotection)rating,butiftheycomplywithBSEN61558theycansafelybeinstalledinzone2-aslongastheyareawayfromthebathorshowerunitandareunlikelytocomeintocontactwithshowerspray.

BathroomSafety

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14382

Technical SpecificationuNSWITCHEDSOCKETSPlus eURo4 aperture

MeD1

2.5mm2 4mm2 6mm2

Multi-Strand10mm2

terminal capacity 3 3 2 1

earth terminal capacity 3 3 2 1

MeD2

medIa Plates EuRO4Aperturedwith13AunswitchedSocket

120.6mm

Fixing centres:

teChnICal sPeCIfICatIon:

Current Rating: 13 AmpVoltage: 220/250V AcMax Load Output: 13AmpSocketIP Rating: iP2XDSwitched Poles: NoneContact Gap Minimum: NoneProduct Class 1: Must be earthedAmbient Operating Temperature: -5°to+40°C

Location: internal Use onlyMax Installation Altitude: 2000mShuttered: yes

standards:

BS EN ISO Standard: (Socket)BS1363-2

medIa Plate

Technical Insert Ref: Description:

MED1 Mediaplate,Euro4Aperturedwith2x13A unswitchedSocketMED2 Mediaplate,Euro4Aperturedwith4x13A unswitchedSocket

SPECIALNOTE:Whenmainsvoltageandtelecom/data/TVaremixedonthesameplateasuitablephasebarrierMUStbeusedinthewallboxtoshieldthemains.

Category:

termInal CaPaCIty:

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 383E&OE02/14

Technical SpecificationCONNECTIONuNITS

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

Switched/Fuse+HaloTerminalCapacity 3 2 1

Switched/Fuse+HaloEarthTerminalCapacity 6 5 3 2 1

cable outlet terminal capacity 5 4 2 2

cable outlet earth terminal capacity 6 5 3 2 1

Fo/Foc terminal capacity 5 4 3 1 1

Fo/Foc earth terminal capacity 6 5 3 2 1

FitsoneGrid-IT

aperture

Category:

FN

GFN

fuse WIth halosWItChed fuse

60.3mm

Fixing centres:

sWItChed fused ConneCtIon unIt

Technical Insert Ref: Description:

SP 1gang13ADoublePoleFusedSpurSPN 1gang13ADPFusedSpur+NeonSPNC 1gang13ADPFusedSpur+Neon+Cable outlet

13A FuSE wITh RED NEON hALO

FN 1gang13AFusewithRedNeonHalo

GRID-IT 13A FuSE wITh NEON hALO MODuLE

GFN 13AFusewithNeonHalo

Cable outlet

Current Rating: 20 AmpMax Load: 20 AmpSwitched Poles: NoneContact Gap Min:NoneTechnical Insert Ref: Description:

co cable outlet

grId-It Cable outlet module

Gc20 cable outlet

unsWItChed ConneCtIon unIt

Switched Poles: NoneContact Gap Min:NoneTechnical Insert Ref: Description:

Fo 1 gang 13A Fuse onlyFOC 1gang13AFuse+CableOutlet

termInal CaPaCIty:

SP SPN SPNC co

Cable outlet

Gc20

Fo Foc

fuse unIt

Current Rating: 13 AmpVoltage: 220/250V AcMax Load: 13 AmpIP Rating: iP2XDSwitched Poles (SP, SPN, SPNC): DoubleContact Gap Minimum: 3mmProduct Class 1: Must be earthedGrid-IT Product Class 1: Face plate must be earthedAmbient Operating Temperature: -5°to+40°CCable Outlet Size Flexible: Min 0.75mm2

Max 2.5mm2

Cable Outlets Fitted with Clamp: yes

Location: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: SwitchedFuse/unswitched BS1363-4Fusewithhalo BS5733Fusewithhalo+fuselink BS5733andBS1362Cableoutlet BS5733

teChnICal sPeCIfICatIon:

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14384

Technical SpecificationTELEVISIONCOAXIALANDDATASOCKETS

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

earth terminal capacity 5 4 3 1 1

tV/tVi tV2 tVFM tVSAt

SATI/SATN

MoD-tVMoD-tVi

MOD-SATNMoD-SAti

teChnICal sPeCIfICatIon:

IP Rating: iP2XDProduct Class 1: Face plate must be earthed (refBS7671415.2.1)Ambient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

Note: Mainsoperatedandextralowvoltageproductsmustnotbeinstalledinthesamefaceplateaperture.WheninstallingwithinthesamebackboxasuitablebarrierMuSTbeusedtoseparatethetwovoltages.SeeBS7671Wiringregulationsforfurtherdetails.

Note for SATI only: IsolatedF-typesatelliteoutlet,whereaDCsignalbacktotheLNBunitonthesatellitedishisnotrequired.

Category:

termInal CaPaCIty:

J12 / J45 2J12/2J45 tcM/tcS

FitsoneEuro1

aperture

MoD-J12MoD-J45-c5

data outletsTELEVISION COAXIAL telePhone soCket

60.3mm

Fixing centres:

MoD-J45-c6MoD-J45-c6S

MoD-tcMMoD-tcS

MoD-tVFM

FitsoneEuro2

aperture

tV J12 J45

tcM/tcS

tv/data/telePhone soCkets and floor soCkets

Technical Insert Ref: Description:

TV 1gangNon-IsolatedTelevision1In/1OutTV2 2gangNon-IsolatedTelevision2In/2OutTVFM IsolatedTV/FMDiplexer1In/2OutTVI 1gangIsolatedTelevision1In/1OutTVSAT 2gangNon-IsolatedTV+ Satellite 2 in/2 outSATN 1gangNon-IsolatedSatelliteSATI 1gangIsolatedSatelliteJ12 1 gang RJ12 outlet Unshielded2J12 2 gang RJ12 outlet UnshieldedJ45 1 gang RJ45 cAt 5e outlet Unshielded2J45 2 gang RJ45 cAt 5e outlet UnshieldedTCS 1gangTelephoneSlaveTCM 1gangTelephoneMaster

EuROFIX TV/DATA/TELEPhONE SOCkET MODuLES

Technical Insert Ref: Description:

MOD-TV 1gangNon-IsolatedTV1In/1OutMOD-TVI 1gangIsolatedTV1In/1OutMOD-TVFM IsolatedTV/FMDiplexer1In/2OutMOD-SATI 1gangIsolatedSatelliteMOD-SATN 1gangNon-IsolatedSatelliteMoD-J12 1 gang RJ12 outlet UnshieldedMoD-J45-c5 1 gang RJ45 cAt 5e outlet UnshieldedMoD-J45-c6 1 gang RJ45 cAt 6 outlet UnshieldedMoD-J45-c6S 1 gang RJ45 cAt 6S outlet ShieldedMOD-TCS 1gangTelephoneSlaveMOD-TCM 1gangTelephoneMaster

MOD-CAT6A and MOD-CAT7 are available on request

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 385E&OE02/14

Technical SpecificationDIGITALTELEVISIONSOCKETS - ScreenedNon-Isolated,DABcompatible

DENT DtRiD

DtVF DtVM DSAt

DSAT+

DtVM Frequency1 FM Dc 5-2200 Mhz

DSAt Frequency1 SAt Dc 5-2200 Mhz

DtVF Frequency1 tV Dc 5-2200 Mhz

DENT/DTRID/DSAT+ Frequency1 tV 5-68 Mhz 125-860 Mhz

Frequency2 FM 88-108 Mhz

Frequency3 SAt Dc 950-2200MHz

DSAT+ Frequency4 tV Dc 5-2200 Mhz

frequenCIes:

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

earth terminal capacity 5 4 3 1 1

teChnICal sPeCIfICatIon:

IP Rating: iP2XDProduct Class 1: Must be earthed (refBS7671415.2.1)Ambient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

Note: Mainsoperatedandextralowvoltageproductsmustnotbeinstalledinthesamefaceplateaperture.WheninstallingwithinthesamebackboxasuitablebarrierMuSTbeusedtoseparatethetwovoltages.SeeBS7671Wiringregulationsforfurtherdetails.

DIGITAL TV COAXIAL SOCkETS

Technical Insert Ref: Description:

DENT Non-IsolatedTV/FM/Satellite1/Satellite2 Quadplex 2 in/ 4 outDSAT+ Non-IsolatedTV/FM/Satellite1/Satellite2 Quadplex2In/4Out+TVF+TCSDTRID Non-IsolatedTV/FM/Satellite triplexer 1 in/3 outDSAT 1gangNon-IsolatedSatelliteDTVF 1gangNon-IsolatedTV(female)DTVM 1gangNon-IsolatedTV(male)

EuROFIX MODuLES

Technical Insert Ref: Description:

MOD-DENT Non-IsolatedTV/FM/Satellite1/Satellite2 Quadplex 2 in/ 4 outMOD-DSAT 1gangNon-IsolatedSatelliteMOD-DTRID Non-IsolatedTV/FM/Satellite triplexer 1 in/3 outMOD-DTVF 1gangNon-IsolatedTV(female)MOD-DTVM 1gangNon-IsolatedTV(male)

Category:

termInal CaPaCIty:

dIgItal televIsIon soCkets

60.3mm

Fixing centres:

120.6mm

EuROFIX DIGITAL TV SOCkET MODuLES

MOD-DENT MoD-DtRiD

MoD-DSAtMoD-DtVFMoD-DtVM

FitsoneEuro1aperture

FitsoneEuro2aperture

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14386

Technical SpecificationeURoFiX AV/AUDio/hDMi

teChnICal sPeCIfICatIon:

IP Rating: iP2XDAmbient Operating Temperature: -5°to+40°C* -25°to+70°C**Location: internal Use onlyMax Installation Altitude: 2000mModule Dimensions: 25 x 50mm

Note: Mainsoperatedandextralowvoltageproductsmustnotbeinstalledinthesamefaceplateaperture.WheninstallingwithinthesamebackboxasuitablebarrierMuSTbeusedtoseparatethetwovoltages.SeeBS7671Wiringregulationsforfurtherdetails.

EuROFIX AV/AuDIO/hDMI SOCkETS

Technical Insert Ref: Description:

MOD-HDMI HDMIChassisMountedSocketTypeA* (FemaleMounted,FemaleFree)MOD-uSBAFF uSB2PanelMountedSocketTypeA* (FemaleMounted,FemaleFree)MOD-uSBAFM uSB2PanelMountedSocketTypeA* (FemaleMounted,MaleFree)MOD-MP3 3.5mmStereoSocket(MP3)Screened*MOD-DIN9 D-RangePCSocket9Pin*MOD-SVGA D-RangeSVGASocket15Pin*

Socket Type: 4mmSuitablefor‘Banana’plugs

MOD-BAN2 2xGoldBindingPostSocket*

EuROFIX AV/AuDIO/hDMI SOCkETS

Technical Insert Ref: Description:

Current Rating: MatingconnectordependentContact Resistance: MatingconnectordependentInsulation Resistance: >1GwDielectric Strength: 500V DcLife Cycle: 5000 Cable OD: 4-9mmSolder Compatibility: iec 68-2-20

MOD-RCA1 1xGoldPhone/AudioSocket**MOD-RCA2 2xGoldPhone/AudioSocket**MOD-RCA3 3xGoldCompositeVideo/Audio**

Current Rating: 15 AmpVoltage: 120VAcContact Resistance: 5mw Max

MOD-XLR LatchingAudioConnector3PinXLRSocket*

Category:

MOD-BAN2

EuROFIX AV/AuDIO/hDMI MODuLES

FitsaEuro1

aperture

MoD-RcA1 MoD-RcA2 MoD-RcA3

MoD-hDMi

MOD-uSBAFF MOD-uSBAFM

MoD-MP3 MOD-DIN9

MoD-XLR

MoD-SVGA

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 387E&OE02/14

Technical SpecificationEuROFIXuSBCHARGERMODuLE

EuROFIX uSB ChARGER MODuLE

Technical Insert Ref: Description:

MOD-uSB EurofixuSBChargerModuleMOD-uSB2 EurofixTwinuSBChargerModule

Category:

MOD-uSB

EuROFIX uSB ChARGER MODuLE

FitsaEuro1

aperture

FitsoneEuro2aperture

teChnICal sPeCIfICatIon:

Voltage (Single): 220/240 Vac 47-53hzVoltage (Twin): 100/240 Vac 47-63hzCurrent Rating (at full load): 0.3A Single 0.6ATwinStandby Current: 1.3mA Single 2.0mATwinMax Load Output: 1.0ApersocketCharging Output: 5Vdc±5%Output Connector: uSBTypeAContact Gap Minimum: 5mm

Product Class 1: Must be earthedAmbient Operating Temperature: 0°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000mModule Dimensions: 25 x 50mm Single 50x50mmTwin

standards:

BS EN ISO Standard: IEC60950-1 iec 61000-6-1/3

termInal CaPaCIty

1.0mm2 1.5mm2 2.5mm2

terminal capacity 2 2 3

Ensurethatthepowerisswitchedofforpowerisisolatedbeforeattemptingtoinstallorconnectthecharger.

MOD-uSB2

ComPlIanCe:

EC Directive mod-usb mod-usb2LowVoltage 2006/95/EC 2006/95/EC

RohS 2002/95/EC 2002/95/EC

weee 2002/96/EC 2002/95/EC

ReAch 1907/2006 1907/2006

eMc 2004/108ec 2004/108ec

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14388

Technical SpecificationTWINCHARGER/POWERSOCKET

tWIn Charger/PoWer soCket

Technical Insert Ref: Description:

uSB99 TwinuSBChargerand2gang 13AunswitchedSocket

Category:

tWIn usb/PoWer soCket

teChnICal sPeCIfICatIon:

Socket Current Rating: 13A uSB Current Rating: 0.128AVoltage: Ac 200-250V 50-60hzuSB Max Load Output: 2.1Atotalfor2outletsuSB Charging Output: 5Vdc±5%2.1AMaxOutput Connector: uSBTypeAContact Gap Minimum: 5mmProduct Class 1: Must be earthedAmbient Operating Temperature: 15to+45°CLocation: internal Use only

Max Installation Altitude: 2000mShuttered: yes

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BS1363-2 BS5733 EN60950

uSB99

2.5mm2 4mm2 6mm2

Multi-Strand10mm2

terminal capacity 3 3 2 1

earth terminal capacity 3 3 2 1

TERMINAL CAPACITy FOR 13A uNSwITChED SOCkET:

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 389E&OE02/14

Technical SpecificationLEADINGEDGEDIMMER INFORMATION

Leading edge Resistive Dimmers - metal Plates

Numberofdim-merswitches

per plate

Nominalplatesize mm

Dimmer typeMaxplateload

w (watts)

Lamp type

tungsten Filament includinghalogen(Watts)

LineaHalogen(watts)

GU10 LeD (watts)

Min Max Max Min Max

1 88x88 1 x 40 400 40 400 300 10 100

2 88x88 2 x 40 600 40 300 300 10 100

3 88x146 3 x 40 1200 40 400 300 10 100

4 88x146 4 x40 1200 40 300 250 10 100

6 150x150 6 x 40 1800 40 300 250 10 100

8 150x150 8 x 40 1800 40 300 250 10 100

9 150x210 9x40 2250 40 250 250 10 100

12 150x210 12 x 40 2250 40 200 150 10 100

12 210x280 12 x 40 3600 40 300 200 10 100

16 210x280 16 x 40 3600 40 225 200 10 100

1 88x88 1 x 60 600 100 600 450 15 150

1 88x146 1 x 1k 1000 150 1000 750 25 250

Leading edge Resistive Dimmers - Wood Plates

Numberofdim-merswitches

per plate

Nominalplatesize mm

Dimmer typeMaxplateload

w (watts)

Lamp type

tungsten Filamentincludinghalogen(Watts)

LineaHalogen(watts)

GU10 LeD (watts)

Min Max Max Min Max

1 88x88 1 x 40 400 40 400 300 10 100

2 88x146 2 x 40 600 40 300 300 10 100

3 88x146 3 x 40 900 40 300 300 10 100

4 88x146 4 x40 1000 40 250 200 10 100

6 150x150 6 x 40 1200 40 200 200 10 100

9 150x210 9x40 1800 40 200 200 10 100

Leading edge Resistive Dimmers - PlastIC Plates

Numberofdim-merswitches

per plate

Nominalplatesize mm

Dimmer typeMaxplateload

w (watts)

Lamp type

tungsten Filamentincludinghalogen(Watts)

LineaHalogen(watts)

GU10 LeD (watts)

Min Max Max Min Max

1 88x88 1 x 40 400 40 400 300 10 100

2 88x88 2 x 40 600 40 300 300 10 100

3 88x146 3 x 40 900 40 300 300 10 100

4 88x146 4 x40 1000 40 250 250 10 100

notes for dImmersNoteA TungstenfilamentGu10lampsmustbebrandedwithafusebase.

NoteB Whenusingmainsvoltagehalogenlamps-dimmersshouldbede-ratedby25%.

NoteC Whenusingmainsvoltagehalogenloadtransformers-maximumratingis210VA.

NoteD ToonlybeusedwithTouchMasterDimmers.

NoteE WhendimmingLEDlampsde-ratedby75%-pleasecontactourTechnicalDepartmentforcompatibility.

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14390

Technical SpecificationLEADINGEDGE INDuCTIVEPuSHON/OFFDIMMERS

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

200VA terminal capacity 2 2

200VA earth terminal capacity 5 4 3 1 1

300VA terminal capacity 2 2

300VA earth terminal capacity 5 4 3 1 1

1X2V 2X2V 1X3V

Category:

300VA INDuCTIVE DIMMER200VA INDuCTIVE DIMMER

60.3mm

Fixing centres:

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDSwitched Poles: SingleContact Gap Minimum: NoneProduct Class 1: Face plate must be earthed

Ambient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

200VA INDuCTIVE DIMMERSeeNotesforDimmersPage390:NoteE

wattage: 200VA(lowvoltage)pergangCurrent Rating: 0.8 AmpMax Load: 200VA(lowvoltage)pergangMin Load: 25VA

Technical Insert Ref: Description:

1X2V 1 gang 200VA2way2X2V 2 gang 200VA2way

GRID-IT 200VA INDuCTIVE DIMMER MODuLESeeNotesforDimmersPage390:NoteE

D2V 1 gang 200VA2way

300VA INDuCTIVE DIMMERSeeNotesforDimmersPage390:NoteE

wattage: 300VA(lowvoltage)Current Rating: 1.25 AmpMax Load: 300VA(lowvoltage)Min Load: 50VA

Technical Insert Ref: Description:

1X3V 1gang300VA2way

termInal CaPaCIty:

LEADINGEDGETECHNOLOGyDIMMERSforusewithlowvoltagetoroidaltransformersandsomeLEDlamps.

Note:Itisrecommendedtocontactthemanufacturerofthetransformertoconfirmthatitisdimmableandisconsideredtobeaninductiveload.

grId-It InduCtIve dImmer module

D2V

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 391E&OE02/14

Technical SpecificationLEADINGEDGEPuSHON/OFFRESISTIVEDIMMERS

3X40 / P3X40w3X40

D40

1X1k

Category:

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 2 2

earth terminal capacity 5 4 3 1 1

600w PuSh on/off dImmer

400w PuSh on/off dImmer

120.6mm

1kw PuShon/off dImmer

60.3mm

1X40 2X40

FitsoneGrid-ITaperture

Fixing centres:

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDSwitched Poles: Single*Contact Gap Minimum: N/A**Product Class 1: Face plate must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use only

Max Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: 400w/600w Resistive Dimmer BSEN60669-2-1

400w PuSh ON/OFF RESISTIVE DIMMERSeeNotesforDimmersPage390:NoteA,B,E

wattage: 400wCurrent Rating: 1.66 AmpMax Load: 400w Resistive per gang

Technical Insert Ref: Description:

1X40 1 gang 400w 2 way2X40 2gang400W2Way,max300Wpergang3X40 3 gang 400w 2 way4X40 4gang400W2Way,max300WpergangWD2X40 2gang400W2way,max300WpergangW3X40 3gang400W2way,max300WpergangW4X40 4gang400W2way,max250WpergangP3X40 3gang400W2way,max300WpergangP4X40 4gang400W2way,max250Wpergang

GRID-IT 400w PuSh ON/OFF RESISTIVE DIMMER MODuLESeeNotesforDimmersPage390:NoteA,B,E

D40 1gang400W2way SwitchedPoles:notapplicable* ContactGapMinimum:3mm**

600w PuSh ON/OFF RESISTIVE DIMMERSeeNotesforDimmersPage390:NoteA,B,E

wattage: 600wCurrent Rating: 2.5 AmpMax Load: 600w Resistive per gang

Technical Insert Ref: Description:

1X60 i gang 600w 2 waywD1X60 i gang 600w 2 way

1kw PuSh ON/OFF RESISTIVE DIMMERSeeNotesforDimmersPage390:NoteA,B,E

wattage: 1kwCurrent Rating: 4.16 AmpMax Load: 1kw Resistive per gang

Technical Insert Ref: Description:

1X1k i gang 1000w 2 way

termInal CaPaCIty:

4X40 / P4X40w4X40

1X60

wD2X40Woodsrange

GRID-IT 400w PuSh ON/OFF dImmer module

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14392

Technical SpecificationTRAIL INGEDGEDIMMER INFORMATION

trailing edge Resistive Dimmers - metal Plates

Numberofdim-merswitches

per plate

Nominalplatesize mm

Dimmer typeMaxplateload

w (watts)

Lamp type

tungsten Filament includingHalogen(Watts)

LineaHalogen(watts)

GU10 LeD (watts)

Min Max Max Min Max

1 88x88 1XTE,1XTM 250 25 250 200 7 62

2 88x88 2XTE,2XTM 500 25 250 200 7 62

3 88x146 3XTE,3XTM 750 25 250 200 7 62

4 88x146 4XTE,4XTM 1000 25 250 200 7 62

6 150x150 6XTE,6XTM 1500 25 250 200 7 62

8 150x150 8XTE,8XTM 1800 25 225 200 7 62

9 150x210 9XTE,9XTM 2250 25 250 200 7 62

12 150x210 12XTE,12XTM 2250 25 200 200 7 62

12 210x280 12XTE,12XTM 3000 25 250 200 7 62

16 210x280 16XTE,16XTM 3600 25 225 200 7 62

trailing edge Resistive Dimmers - Wood Plates

Numberofdim-merswitches

per plate

Nominalplatesize mm

Dimmer typeMaxplateload

w (watts)

Lamp type

tungsten Filament includingHalogen(Watts)

LineaHalogen(watts)

GU10 LeD (watts)

Min Max Max Min Max

1 88x88 1Xte 250 25 250 200 7 62

2 88x88 2Xte 400 25 200 200 7 62

3 88x146 3Xte 750 25 250 150 7 62

4 88x146 4Xte 800 25 200 150 7 62

6 150x150 6Xte 1200 25 200 150 7 62

8 150x150 8Xte 1600 25 200 150 7 62

9 150x210 9XTE 1800 25 200 150 7 62

12 150x210 12Xte 2250 25 200 150 7 62

trailing edge Resistive Dimmers - PlastIC Plates

Numberofdim-merswitches

per plate

Nominalplatesize mm

Dimmer typeMaxplateload

w (watts)

Lamp type

tungsten FilamentincludingHalogen(Watts)

LineaHalogen(watts)

GU10 LeD (watts)

Min Max Max Min Max

1 88x88 1XTE,1XTM 250 25 250 200 7 62

2 88x88 2XTE,2XTM 500 25 250 200 7 62

3 88x146 3XTE,3XTM 750 25 250 150 7 62

4 88x146 4XTE,4XTM 1000 25 250 150 7 62

notes for dImmersNoteA TungstenfilamentGu10lampsmustbebrandedwithafusebase.

NoteB Whenusingmainsvoltagehalogenlamps-dimmersshouldbede-ratedby25%.

NoteC Whenusingmainsvoltagehalogenloadtransformers-maximumratingis210VA.

NoteD ToonlybeusedwithTouchMasterDimmers.

NoteE WhendimmingLEDlampsde-ratedby75%-pleasecontactourTechnicalDepartmentforcompatibility.

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 393E&OE02/14

Technical SpecificationTRAIL INGEDGEPuSHON/OFFDIMMERS

FitsoneGrid-ITaperture

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 2 2

earth terminal capacity 5 4 3 1 1

Dte1Xte 2Xtew2Xte

3Xte 4Xtew4Xte

Category:

traIlIng edge dImmer grId-It traIlIng edge dImmer modules

60.3mm

Fixing centres:

teChnICal sPeCIfICatIon:

wattage: 250w Resistive 210VA inductiveCurrent Rating: 1.1 Amp per gangMax Load: 250w Resistive 210VA inductiveMinimum Load: 25w/25VAVoltage: 220/250V AcIP Rating: iP2XDSwitched Poles: SingleContact Gap Minimum: NoneProduct Class 1: Face plate must be earthed

Ambient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BSEN60669-2-1

traIlIng edge dImmerSeeNotesforDimmersPage393:NoteA,B,C,E

Technical Insert Ref: Description:

1Xte 1 gang 250w/210VA Multi-way Dimmer2Xte 2 gang 250w/210VA Multi-way Dimmer 3Xte 3 gang 250w/210VA Multi-way Dimmer4Xte 4 gang 250w/210VA Multi-way Dimmerw2Xte 2 gang 250w/210VA Multi-way Dimmer max 200w per gangw4Xte 4 gang 250w/210VA Multi-way Dimmer max 200w per gang

grId-It traIlIng edge dImmer moduleSeeNotesforDimmersPage393:NoteA,B,C,E

Technical Insert Ref: Description:

Dte 1 gang 250w/210VA Multi-way Dimmer Module

termInal CaPaCIty:

TRAILINGEDGETECHNOLOGyDIMMERS.Aresuitableforcontrolofbothresistiveandinductiveloads.Whenusedfordimming lowvoltageelectronichalogentransformersitmustbenotedthatthedimmercontrolstheprimarysideofthetransformer.

120.6mm

Note:Formulti-wayswitchingapushtomakeretractiveswitchshouldbeinstalledintheotherpositions.(Note:standardtwowayswitcheswillnotworkwiththisproduct).

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14394

Technical SpecificationTRAIL INGEDGETOuCHDIMMERS

DtS

Fits 1 Grid-it aperture

DtM

Category:

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 2 2

earth terminal capacity 5 4 3 1 1

1XtM 2XtM

3XtM 4XtM

touCh master dImmer

120.6mm

60.3mm

Fixing centres:

teChnICal sPeCIfICatIon:

wattage: 250w Resistive 210VA inductiveCurrent Rating: 1.1 AmpsMax Load: 250w Resistive 210VA inductiveMinimum Load: 25w/VAVoltage: 220/250V AcIP Rating: iP2XDProduct Class 1: Face plate must be earthed

Ambient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: BSEN60669-2-1

traIlIng edge touCh master multI-Way dImmerSeeNotesforDimmersPage393:NoteA,B,C,E

Technical Insert Ref: Description:

1XTM 1gang250W/210VAMulti-WayTouchMaster2XTM 2gang250W/210VAMulti-WayTouchMaster3XTM 3gang250W/210VAMulti-WayTouchMaster4XTM 4gang250W/210VAMulti-WayTouchMaster grId-It touCh master multI-Way dImmer moduleSeeNotesforDimmersPage393:NoteA,B,C,E

DTM 1gang250W/210VAMulti-WayTouch MasterModule

touCh slave ControllerSeeNotesforDimmersPage393:NoteA,B,C,D

Technical Insert Ref: Description:

1XTS 1gangMulti-WayTouchSlave2XTS 2gangMulti-WayTouchSlave3XTS 3gangMulti-WayTouchSlave4XTS 4gangMulti-WayTouchSlave

grId-It touCh slave Controller moduleSeeNotesforDimmersPage393:NoteA,B,C,D

DTS 1gangMulti-WayTouchSlave ControllerModule

Touch slave controllers to be used only with touch master dimmers or ceiling dimmers. (wattage and voltage will be the same as the dimmer).

termInal CaPaCIty:

1XtS 2XtS

3XtS 4XtS

touCh slave Controller

grId-It touCh master dImmer module

grId-It touCh slave Controller module

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 395E&OE02/14

Technical SpecificationPuSHON/OFFSWITCHESANDBALLASTCONTROLLER

Category:

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 2 2

earth terminal capacity 5 4 3 1 1

Push on/off sWItCh

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDContact Gap Minimum: 3mmProduct Class 1: Face plate must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

StandardHamiltonmanufacturedelectricalaccessoriesaredesignedtobemountedonBS4662:2006flushwallboxes.

standards:

BS EN ISO Standard: Pushon/offswitch BSEN60669-1

WhIte PlastIC Push on/off sWItCh

Current Rating: 5 AmpsVoltage: 230/240V Ac

Technical Insert Ref: Description:

1X5A 1gang5APushOn/OffSwitch2X5A 2gang5APushOn/OffSwitch3X5A 3gang5APushOn/OffSwitch4X5A 4gang5APushOn/OffSwitch

grId-It Push on/off sWItCh modules

Current Rating: 3 Amps

Technical Insert Ref: Description:

DIP 3AIntermediatePushOn/OffModule

Current Rating: 6 Amps

DPS 6A2wayPushOn/OffSwitchModule

grId-It hIgh frequenCy ballast Control module

Current Rating: 1-10V

Technical Insert Ref: Description:

DHF 1-10VDCHighFrequencyBallast ControlModule(NoOff)

Note: NormallyusedinconjunctionwithHamilton10or20amprockerswitch’.The1-10vmodulewillnotswitchmainsvoltage.Itisdesignedtocontrola1-10voltsignalonly.

termInal CaPaCIty:

3X5A

1X5A 2X5A

4X5A

120.6mm

60.3mm

DiP /DPS DhF

grId-It Push on/off sWItCh module

grId-It hIgh frequenCy ballast Control module

Fits 1 Grid-it aperture

Fixing centres:

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14396

Technical SpecificationGRID- IT NEONANDNEONHALOMODuLES

Category:

1mm2 1.5mm2 2.5mm2 4mm2

Multi-Strand6mm2

terminal capacity 5 4 2 2 1

earth terminal capacity 6 5 3 2 1

GNO

grId-It neon halo modules

teChnICal sPeCIfICatIon:

Voltage: 220/250V AcIP Rating: iP2XDProduct Class 1: Face plate must be earthedAmbient Operating Temperature: -5°to+40°CLocation: internal Use onlyMax Installation Altitude: 2000m

standards:

BS EN ISO Standard: BS5733

grId-It neon halo modules

Technical Insert Ref: Description:

GN NeonHaloModules

grId-It neon only modules

Technical Insert Ref: Description:

GNO NeonOnlyModulesGNH-PCR NeonOnlyModuleHorizontallyMounted PleaseCleanRoomGNH-DND NeonOnlyModuleHorizontallyMounted DoNotDisturbGN-MAID NeonHaloModuleMaidGN-BELL NeonHaloModuleBell

termInal CaPaCIty:

Fits 1 Grid-it

aperture

GN

grId-It neon only modules

GN-MAID GN-BELL

GNH-DNDGNH-PCR

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 397E&OE02/14

Technical SpecificationLARGEPLATESDIMENSIONS

280mm

210mm

150mm

150mm

150mm

210mm

210mm

210mm

tungsten Filament includinghalogen

No.Itemsper plate

Dimmer type

Maxloadper plate

Minloadper gang

Maxloadper gang

Metal Plates

6 400 1800 40 300

8 400 1800 40 300

6 TM,TE 1500 25 250

8 TM,TE 1800 25 225

4 600 1800 100 450

2 1000 1800 150 900

WoodPlates

6 400 1200 40 200

6 te 1200 25 200

8 te 1600 25 200

All Plates

6,8 Gridrockers,toggle,touchslave

tungsten Filament includinghalogen

No.Itemsper plate

Dimmer type

Maxloadper plate

Minloadper gang

Maxloadper gang

Metal Plates

12 400 3600 40 300

16 400 3600 40 225

12 TM,TE 3000 25 250

16 TM,TE 3600 25 225

6 600 3600 100 600

3 1000 3600 150 1000

All Plates

24 Gridrockers,toggle,touchslave

tungsten Filament includinghalogen

No.Itemsper plate

Dimmer type

Maxloadper plate

Minloadper gang

Maxloadper gang

Metal Plates

9 400 2250 40 250

12 400 2250 40 200

9 TM,TE 2250 25 250

12 TM,TE 2250 25 200

4 600 2250 100 550

3 1000 2250 150 750

WoodPlates

9 400 1800 40 200

9 te 1800 25 200

12 te 2250 25 200

All Plates

9,12 Gridrockers,toggle,touchslave

tungsten Filament includinghalogen

No.Itemsper plate

Dimmer type

Maxloadper plate

Minloadper gang

Maxloadper gang

Metal Plates

12 400 2400 40 200

12 TM,TE 2400 25 250

4 600 2400 100 550

3 1000 2400 150 800

All Plates

18 Gridrockers,toggle,touchslave

Note:LargeplasticnotavailableinPerceptionCFX®,HartlandColourscFX®, white Plastic.

Note:youcanmix‘n’matchdimmersaslongasyoudon’tgooverthemaximumwattagefortheplate.

SeedimmerinformationforLineaHalogenandGu10LED

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14398

Technical SpecificationGRID- IT /EuROFIX/BLANKPLATEDIMENSIONSGRID-IT GRID FIX PLATE DIMENSIONS

Dimension (mm)Linea-CFX

hartland CFX hartland Perception

CFX Sheer CFX sheer CheritonDuo Georgian

Perlina Rondoscala

1GP1gangaperturegridfixplate 86 x 86 95x95 91x91 86 x 86 88 x 88 86 x 86 86 x 86 86 x 86 88 x 88

2GP2gangaperturegridfixplate 86 x 86 95x95 91x91 86 x 86 88 x 88 86 x 86 86 x 86 86 x 86 88 x 88

3GP3gangaperturegridfixplate 145 x 86 154x95 150x91 145 x 86 144 x 85 145 x 86 145 x 86 146 x 86 146 x 86

4GP4gangaperturegridfixplate 145 x 86 154x95 150x91 145 x 86 144 x 85 145 x 86 145 x 86 146 x 86 146 x 86

6GP6gangaperturegridfixplate 146 x 146 146 x 146 146 x 146

8GP8gangaperturegridfixplate 146 x 146 146 x 146 146 x 146

9GP9gangaperturegridfixplate 146 x 210 146 x 210 146 x 210

12GP12gangaperturegridfixplate 146 x 210 146 x 210 146 x 210

SS1GP1gang13Aswitchedsocketaperturegridfixplate

86 x 86 95x95 91x91 86 x 86 88 x 88 86 x 86 86 x 86 86 x 86 88 x 88

SS2GP2gang13Aswitchedsocketaperturegridfixplate

145 x 86 154x95 150x91 145 x 86 144 x 85 145 x 86 145 x 86 146 x 86 146 x 86

EuROFIX PLATE DIMENSIONS Plates must be earthed via the earth tag

Dimension (mm)

Aperture size

Linea-CFXhartland

CFX hartland Perception CFX Sheer CFX sheer Cheriton

Duo GeorgianPerlinaRondoscala

EuRO11ModulePlate 25 x 50 86 x 86 95x95 91x91 86 x 86 88 x 88 86 x 86 86 x 86 86 x 86 88 x 88

EuRO22ModulePlate 50 x 50 86 x 86 95x95 91x91 86 x 86 88 x 88 86 x 86 86 x 86 86 x 86 88 x 88

EuRO33ModulePlate 75 x 50 145 x 86 154x95 150x91 145 x 86 144 x 85 145 x 86 145 x 86 146 x 86 146 x 86

EuRO44ModulePlate 100 x 50 145 x 86 154x95 150x91 145 x 86 144 x 85 145 x 86 145 x 86 146 x 86 146 x 86

EuROFIX POLyCARBONATE PLATE DIMENSIONS

Nominal Plate Size Aperture Size Number of Modules held

MOD-P2M2ModuleEuroFixPlate 86 x 86mm 50 x 50mm

One50x50mmModuleorTwo25x25mmModulesorOne25x50mmModuleandtwo12.5mmblankingmodules

MOD-P4M4ModuleEuroFixPlate 146 x 86mm 100 x 50mm

One100x50mmModuleorTwo50x50mmModulesorOne50x50mmModuleandtwo 25x50mmModulesorFour25x50Modules

blank Plate dImensIons Plates must be earthed via the earth tag

Dimension (mm)Linea-CFX

hartland CFX hartland Perception

CFX Sheer CFX sheer CheritonDuo Georgian

PerlinaRondoscala

BPSSingleBlankPlate 86 x 86 95x95 91x91 86 x 86 88 x 88 86 x 86 86 x 86 86 x 86 88 x 88

BPDDoubleBlankPlate 145 x 86 154x95 150x91 145 x 86 144 x 85 145 x 86 145 x 86 146 x 86 146 x 86

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. 399E&OE02/14

Technical SpecificationGRID- IT ANDEuROFIXANCILLARIESDIMENSIONS

sPare module grId dImensIons ForSheer,HartlandandCheritonfrontplates

1G-GRID 2g-grId 3G-GRID 4g-grIdSpare insert Grid (mm) 78 x 78mm 78 x 78mm 138 x 78mm 138 x 78mm

sPare Plate sCreWs dImensIons BoxQuantity:50 Technical Insert Ref: Description sizeScRew-PSGR DomeHeadedSlottedScrewsforRockerAperturePlatestoGrid M3 x 5mm

ScRew-PSGS CountersunkSlottedScrewsforSwitchedSocketPlatestoGrid M3 x 5mm

SPARE BACk BOX SCREwS DIMENSIONS BoxQuantity:50 Technical Insert Ref: Description sizeScRew-SG25 CountersunkSlottedScrewsforfixingGridstoBackBox M3.5 x 25mm

ScRew-SG50 CountersunkSlottedScrewsforfixingGridstoBackBox M3.5 x 50mm

sPare module grId sCreWs dImensIons BoxQuantity:50 Technical Insert Ref: Description sizeScRew-MiSc CountersunkCross-SlottedScrewsforfixingModuletoGrid M2.5 x 4mm

blank Plate module dImensIons Technical Insert Ref: Description Nominal Size DepthMOD-HALFBLANK EuroFixHalfBlankingPlateModule 12.5 x 50mm

MOD-BLANK EuroFixOneBlankingPlateModule 25 x 50mm

BMOD Grid-ITBlankModule 23.2 x 51mm 9.2mm

SPARE MODuLE GRID FOR ShEER CFX AND hARTLAND CFX SheerCFXGridcompletewithgasket 8c1G 8c2G 8c3G 8c4G

HartlandCFXGridcompletewithgasket 7c1G 7c2G 7c3G 7c4G

DIMENSIONS(MM) 86 x 86mm 86 x 86mm 145 x 86mm 145 x 86mm

SuRFACEMOuNTEDBOXSuRROuNDSSuRFACE MOuNTED BOX SuRROuND DIMENSIONS - FOR wOODS RANGE ONLy Technical Insert Ref: Description Nominal Size Fits over mounted box sizeBFS SurfaceMountingBoxSingle 93x93x30mm 25mm

BFD SurfaceMountingBoxDouble 150x93x30mm 25mm

Category:

mIsCellaneous Items

Technical Insert Ref: Description:

G-KEy SpareKeyforKeySwitchD-KIT DimmerInlay+KnobKit

Technical Insert Ref: Description:

MOD-KEySTONE SuitableforKeystonetypeinsertMOD-TIDy CableOutletTidywithbrushes

MISCELLANEOuS

Duetoconstantchangesinregulations,etc.usersshouldsatisfythemselvestherehavebeennoamendments. E&OE02/14400