Heating Systems Product CatalogueViessmann Vitodens 100-W LPG System Boiler 26kW Ea Ea 7639527 B1HD002 Viessmann Vitodens 100-W Natural Gas System Boiler 35kW Viessmann Vitodens 100-W

Heating SystemsProduct Catalogue

CLIMATE CONTROL SYSTEMS

1. This is a living document and is under constant revision - please contact KE KELIT for the latest version2. Due to the large range of products available, only a section are contained in this catalogue. For the complete

range, please visit www.kekelit.co.nz or our product portal on products.kekelit.co.nz3. Please contact KE KELIT on [email protected] for pricing and information4. Some products are not stocked by KE KELIT and are only available through indent. Please contact KE KELIT

on [email protected] for information and pricing on products available through indent.

© KE KELIT NZThis document and its contents remain property of KE KELIT NZ.Any unauthorised use or reproduction in full or part is forbidden

Revision: 4

PRODUCTS, PRICING, AVAILABILITY & TECHNICAL DATA

A product viewing portal for your convenience to obtain technical data, stock availability and pricing

products.kekelit.co.nz

OVERVIEWNo login is required to view the products and product documents.

To gain access to product pricing and availability you are required to create an account which can be done through the Register tab of the products website.

The account will need verifying to be assigned a pricing code, email: [email protected] to request price code allocation.

BENEFITS & FUNCTIONUsing the products website, you will be able to view most products available through KE KELIT NZ.

The products have been grouped in terms of function, these groups can be found by going to the Home tab on the products website.

Once you have registered and signed in you will be able to create projects which you can add products to.

You can view and edit your projects in the Projects tab. Once you have finished building up the project you are working on, you can export this file to a spreadsheet. Please then send this

spreadsheet through to [email protected] to place you order.

SUPPORTIf at any stage you run into any issues please feel free to get in touch via email on [email protected]

4 Introduction

Bringing the best of European design simplicity and innovation to New Zealand, KE KELIT NZ was established on local shores in 2013 and has since gained a reputation for quality and service.

Originally founded in 1945 by Karl Egger as a water, gas and heating installation company, has grown from it’s humble beginnings in Austria to a globally recognised leader in the manufacture and distribution of durable plastic and metallic pipes.

The local team is backed by a long-standing heritage and a reputation for exceptional quality and value. Globally, KE KELIT boasts a team of over 1000 employees, with manufacturing facilities or trading offices in over 30 countries.

Since entering the New Zealand market KE KELIT has experienced exceptional growth and market acceptance. In 2015 the decision was made to expand on the products offered to the Heating Ventilation and Air Conditioning segment of the New Zealand Construction Industry. This has now come to fruition and 2017 saw the establishment of KE KELIT Climate Control that now operates in parallel with KE KELIT Innovative Pipe Systems.

We have experts located throughout the country with extensive knowledge to support our growing local customer base, backed by the guidance of KE KELIT Austria, and the technical support of our partnered companies, Viessmann, Vogel & Noot, MEIBES, Flamco, Simplex, and Nexus Valve.

KE KELIT New Zealand continues delivering industrial, commercial and residential projects across New Zealand. The speed and ease of installation are the results of years of innovative product development. The Global brands represented by KE KELIT New Zealand are symbols for quality that have been trusted names in competitive markets for decades.

We continue to support New Zealand’s leading Architects, Consultants, Installers, and Homeowners with the highest quality European designed and manufactured piping and HVAC equipment.

ABOUT US

5Introduction

FEATURED PRODUCTS

Air & Dirt Separators Expansion Vessels

Safety Valves

Heat Sources Controls

Panel Radiators Design Radiators

Low-Temperature Radiators

Underfloor Heating Clips

Radiator Connection Thermostatic Valves

Balancing Valves Heating System Protection

Ball ValvesPump Groups Thermostatic Valves

Contents6

CONTENTSHeat Sources ............................................................................................................................

Residential Condensing Gas Boilers ........................................................................

Residential Condensing Gas Boiler Flues .................................................................

Residential Non-Condensing Boilers ........................................................................

Residential Non-Condensing Gas Flues ....................................................................

Residential Boiler Controls ....................................................................................

Hot Water Cylinders ............................................................................................

Diesel Boilers ......................................................................................................

Underfloor Heating ................................................................................................................Underfloor Heating Pipe ........................................................................................

Underfloor Heating Manifolds ................................................................................

Underfloor Heating Manifold Housings ...................................................................

Underfloor Heating Fixings ....................................................................................

Underfloor Heating Accessories .............................................................................

Underfloor Heating Spare Parts .............................................................................

Underfloor Heating Insulation Strips .......................................................................

Radiators ....................................................................................................................................Radiator Brackets ................................................................................................

Panel Radiators ....................................................................................................

Laserline Column Radiators ...................................................................................

Convectors ..........................................................................................................

Trench Convectors ................................................................................................

Design Radiators ..................................................................................................

Towel Warmers ....................................................................................................

Towel Warmer Accessories ...................................................................................

Heating Connection Valves .....................................................................................

Heating Connection Valve Accessories ....................................................................

Thermostatic Valves .............................................................................................

Baseboard System ...............................................................................................

Controls ......................................................................................................................................Viessmann Controls ..............................................................................................

Seltron Universal Controls .....................................................................................

KELOX Underfloor Heating Controls ........................................................................

Pump Groups ............................................................................................................................Pump Groups - Residential .....................................................................................

Boiler Guards - Residential ....................................................................................

Boiler Guard Connection ........................................................................................

Pump Group Manifolds - Residential ........................................................................

Shut-off Sets - Residential .....................................................................................

Pump Group Actuators - Residential .......................................................................Pump Group Accessories - Residential ....................................................................

810

11

12

13

13

15

15

1617

19

22

24

25

28

28

2931

31

35

36

37

37

40

41

4347

50

51

5253

54

56

6061

63

63

64

64

65

65

Contents 7

Pump Groups - Commercial ...................................................................................

Boiler Guards - Commercial ...................................................................................

Pump Group Manifolds - Commercial ......................................................................

Shut-off Sets - Commercial ....................................................................................

Pump Group Actuators - Commercial ......................................................................

Victaulic Fittings - Commercial ...............................................................................

Pump Group Accessories - Commercial ...................................................................

Valves ..........................................................................................................................................Balancing Valves ...................................................................................................

Pressure Independent Control Valves ......................................................................

Differential Pressure Control Valves ........................................................................

Nexus Valve Accessories ........................................................................................

Ball Valves ...........................................................................................................

Zone Valves .........................................................................................................

Regulation Boxes ..................................................................................................

Expansion Vessels ..................................................................................................................Expansion Vessels ................................................................................................

Expansion Vessel Accessories ................................................................................

Expansion Vessel Wall Mounts ...............................................................................

HVAC Accessories ..................................................................................................................Safety Valves .......................................................................................................

Tundish ...............................................................................................................

T-Plus Branching System .......................................................................................

Pressure Gauges ..................................................................................................

Other HVAC Accessories .......................................................................................

Heating System Protection ................................................................................................Air & Dirt Separators ............................................................................................

Air Separators .....................................................................................................

Dirt Separators ....................................................................................................

Hydraulic Separators ............................................................................................

Dosing Pots .........................................................................................................

Inhibitors & System Cleaning ..................................................................................

Pipe Systems ............................................................................................................................COPPERFIX .........................................................................................................

STEELFIX C-Steel ................................................................................................

KELOX Multilayer Pipe ............................................................................................

KELOX PROTEC ...................................................................................................

KELOX WINDOX ...................................................................................................

LEXEL Pipe Insulation ............................................................................................

Terms & Conditions of Trade .............................................................................................

Index .............................................................................................................................................

67

69

69

70

71

71

73

7475

79

81

82

84

90

91

9294

96

98

99100

102

102

103

104

105106

107

109

110

111

111

114117

130

145

149

158

168

171

175

HEAT SOURCES

For our full range of Heat Sources and Heat Source Accessories email KE KELIT Climate Control: [email protected]

Heat Sources 9

VIESSMANN CONDENSING BOILER BENEFITSAll Viessmann residential condensing boilers include:• Modulating burners for high efficiency and comfort• Stainless steel high efficiency heat exchanger – 10 year warranty• Touch screen display• Can run at lower temperatures for underfloor heating – without the need for a mixing valve• High efficiency integral circulating pump• 3 bar pressure relief valve, pressure gauge and expansion vessel• Can also supply domestic hot water (DHW) either by heating a hot water cylinder or instantaneous DHW,

or both.• Zero clearance to combustibles – as needed in compact European houses• 5 year standard warranty on boilers• UK Consumer organisations “BEST BUY BOILER 2019”

High Efficiency Control FeaturesWeather compensation: All boilers can use outside temperature sensors to alter the operating temperature, making the system more efficient and more comfortable.

Room Influence: Efficiency can be increased further by adjusting the weather compensation curve according to how much solar gain a house has. This requires an Open Therm room controller such as the Vitotrol series controller.

Touch Screen Display on all Vitodens 100-W Boilers

For more information on the Viessmann range of products, please contact: [email protected]

Heat Sources10

RESIDENTIAL CONDENSING GAS BOILERS Viessmann - Vitodens 100-W Condensing System Boiler

With its outstanding design and price/performance ratio, the Vitodens 100-W is the perfect mix of performance and value. Its compact design, zero clearance to combustibles and extremely quiet operation make the Vitodens 100-W an ideal choice even in the smallest of spaces.

Internal 3 valves means it can heat a HWC with only the addition of a DHW sensor

H x W x D: 700 x 400 x 350 (Not including clearance for flue and hydraulic connections)

CODE DESCRIPTION UNIT

Viessmann - Vitodens 100-W Condensing Combi Boiler

All the benefits of a Viessmann Vitodens 100 W System Boiler, plus built-in on-demand domestic hot water (DHW)

No DHW cylinder means lower installation cost and no tank losses.

Quality you can count on! Stainless steel heat exchanger, built-in pressure bypass and 10 bar working pressure rating (on DHW side only).

Reliable and consistent DHW supply with built-in DHW temperature and flow sensors.• 35kW boiler: DHW 20 L/min at 25°C temperature rise• 26kW boiler: DHW 14 L/min at 25°C temperature rise



7639524

B1HD001

Viessmann Vitodens 100-W Natural Gas System Boiler 19kW

Viessmann Vitodens 100-W LPG System Boiler 26kW

Ea

Ea

7639527

B1HD002

Viessmann Vitodens 100-W Natural Gas System Boiler 35kW

Viessmann Vitodens 100-W LPG System Boiler 35kW

Ea

Ea

7639526

B1JD001

Viessmann Vitodens 100-W Natural Gas Combination Boiler 26kW

Viessmann Vitodens 100-W LPG Combination Boiler 26kW

Ea

Ea

7639528

B1JD002

Viessmann Vitodens 100-W Natural Gas Combination Boiler 35kW

Viessmann Vitodens 100-W LPG Combination Boiler 35kW

Ea

Ea

Heat Sources 11

Viessmann - Vitodens 111-W Condensing Storage Combi Boiler

Rapid, reliable and compact, the Vitodens 111-W is high performance wall mounted storage boiler for family homes with a high demand for hot water.

With its cylinder loading system (CLS) and 46 litre integrated stainless steel storage tank, the 111-W has the capacity to fill a standard bath in just 8 minutes, whilst also supplying a sink or washbasin simultaneously.

The advanced sensor technology allows constant output temperatures to be maintained even under high demand.


DESCRIPTION UNITCODE

7570732 Viessmann Vitodens 111-W Combination Storage Boiler 26kW Ea

7570733 Viessmann Vitodens 111-W Combination Storage Boiler 35kW Ea

RESIDENTIAL CONDENSING GAS BOILER FLUESViessmann - Vitodens Horizontal Flue Kit - 60/100mm

Suitable for the Viessmann Residential Boiler range (Vitodens 100-W & Vitodens 111-W). The flues make it easy to get around obstructions, and are quick and simple to install.

The Vitodens Horizontal Flue Kit consists of: 87˚ elbow, 500mm pipe and an external outlet.


7637242 Viessmann Vitodens Flue 60/100mm Horizontal Kit Ea

Viessmann - Vitodens 100-W Outdoor Case

For mounting a Vitodens 100-W boiler outside of a building. Protects the boiler from the weather, ensuring electrical elements stay dry.

With control access panel and flue outlet on front.


9451484 Viessmann Vitodens 100-W Outdoor Case Ea

Heat Sources12

Viessmann - Vitodens Flues - 60/100mm


NOTE: Flue system is dependent on boiler output, flue bends and fittings, straight lengths and flue routing.


7373240 Viessmann Flue Adapter For 60/100mm to 80/125mm Ea

7637255 Viessmann Vitodens Flue 60/100mm Elbow 45° Ea

7637254 Viessmann Vitodens Flue 60/100mm Elbow 87° Ea

7637253 Viessmann Vitodens Flue 60/100mm Extension 0.5m Ea

7637266 Viessmann Vitodens Flue 60/100mm Extension 1m Ea

RESIDENTIAL NON-CONDENSING GAS BOILERS Viessmann - Vitopend 100-W Non-Condensing System Boiler

Available in single-circuit and combined performance of the boiler with a capacity of 18kW. Vitopend 100 W comes equipped with a modulated atmospheric burner with a fan to remove the combustion products (with a closed combustion chamber).• Integrated controller with integrated diagnostics system supplied in a single

module with a boiler.• High comfort of preparing hot water due to the built-in plate heat exchanger in the

combined boiler, which ensures a constant supply temperature.• Built-in time relay with a clock mechanism that allows you to set the mode of work

by day and by week.


7571157 Viessmann Vitopend 100-W System Non-Condensing Boiler (Heating Only) 18kW Ea

Viessmann - Vitodens Vertical Flue Kit - 60/100mm


The Vitodens Vertical Flue Kit consists of: 500mm pipe and an external outlet. Extensions can be added as required.


7373230 Viessmann Vitodens Flue 60/100mm Vertical Kit Ea

Heat Sources 13

RESIDENTIAL NON-CONDENSING GAS FLUES

Viessmann - Vitopend Flues - 60/100mm

Suitable for the Viessmann Vitopend 100-W boiler. The flues make it easy to get around obstructions, and are quick and simple to install.

NOTE: Flue system is dependent on boiler output, flue bends and fittings, straight lengths and flue routing.


Viessmann - Vitopend Horizontal Flue Kit - 60/100mm

Suitable for the Viessmann Vitopend 100-W. The flues make it easy to get around obstructions, and are quick and simple to install.

The Vitopend Horizontal Flue Kit consists of: 87˚ elbow, 500mm pipe and an external outlet.


7641368 Viessmann Vitopend Flue 60/100mm Horizontal Kit Ea

7641374 Viessmann Vitopend Flue 60/100mm Elbow 45° Ea

7641371 Viessmann Vitopend Flue 60/100mm Elbow 90° Ea

7641369 Viessmann Vitopend Flue 60/100mm Extension 1m Ea

7641370 Viessmann Vitopend Flue 60/100mm Extension 0.5m Ea

RESIDENTIAL BOILER CONTROLSViessmann - Vitotrol 100 OpenTherm Thermostat

Vitotrol 100 OpenTherm - with digital time switch. For one heating circuit with or without mixer. • Easy to read function display and control buttons.• Rotary selector for changing temperature.• Weather compensated mode.Displays the following information:• Current outside temperature.• Fault messages.• Set flow temperature.• Actual flow temperature.

Note: Must be used in conjunction with Viessmann Outdoor Temperature Sensor. Please see below for details.


Z014134 Viessmann Indoor Thermostat Vitotrol 100 OT For Vitodens 100 and Vitodens 111 Ea

Heat Sources14

Viessmann - Vitotrol UTDB Indoor Thermostat

Viessmann - Domestic Hot Water Cylinder Temperature Sensor

Room temperature controller with switching output (two-point output).• With menu-guided operation and digital timer.• Menu-driven operation with digital timer (daily and weekly program).• Mains-independent operation (two 1.5V Alkaline AA batteries, operating time

approx. 1.5 years).

For capturing the DHW temperature (3.75 m long).

Suitable for Vitodens 100-W System Boilers.

CODE

CODE

DESCRIPTION

DESCRIPTION

UNIT

UNIT

Viessmann - Vitotrol UTDB-RF Indoor Thermostat

With integrated radio transmitter and separate receiver with switching output (two-point output).• Including menu-driven operation and digital timer.• The room temperature controller is battery operated (3V), the receiver runs on

mains voltage (230V).• Digital timer with day and week program.• Receiver with display of relay status.


7537230

7179114

Viessmann Indoor Thermostat Vitotrol UTDB

VIESSMANN DHW Cylinder Temperature Sensor (3.75m)

Ea

Ea

7537231 Viessmann Indoor Thermostat Vitotrol UTDB-RF Ea

Viessmann - Outdoor Temperature Sensors

To be installed on a south facing (coldest) wall of the building. The sensor adjusts your heating system according to the changing outside temperature.

Note: Must be used in conjunction with a Viessmann Vitotrol 100 OpenTherm Thermostat. Please see above for details.


7554227 Viessmann Vitodens 100-W Outdoor Temperature Sensor Ea

7837053 Viessmann Vitodens 111-W Outdoor Temperature Sensor Ea

100-W Sensor 111-W Sensor

Heat Sources 15

7534000 Viessmann HS Hot Water Cylinder 200 L Ea

7534001 Viessmann HS Hot Water Cylinder 300 L Ea

HOT WATER CYLINDERS Viessmann - Hard Shell Hot Water Cylinders

Available in 200 or 300 litre capacity. 40mm insulation shell thickness.Max. temperature: 95°C.Max. pressure: 8 bar. Note: For more information on this product, please email KE KELIT Climate Control via: [email protected]


DIESEL BOILERSViessmann - Vitorondens 200-T Diesel Boiler

The Vitorondens 200-T is a floor-standing cast iron oil condensing boiler with an attractive price/performance ratio. The dimensions of the cast iron boiler are impressively compact and it is particularly suitable for modernization projects. Combining the durable Eutectoplex heating surface with the downstream Inox-Radial heat exchanger made from stainless steel separates combustion and condensation effectively. The benefit lies in the fact that the combustion residues remain in the combustion chamber, whilst the combustion gases can condense in the heat exchanger without leaving any residues behind.

Please email [email protected] for pricing and more information

Viessmann - Vitoladens 300-C Condensing Diesel Boiler

The Vitoladens 300-C is a highly efficient oil condensing boiler with flexible options for its application. Particularly compact, it is suitable both for use in new build and as a replacement for old boilers. The corrosion-resistant stainless steel Inox-Radial heat exchanger is the core of the condensing boiler. In direct connection with the biferral composite heating surface, the energy used is converted to heat efficiently and with practically no loss. The extremely economical usage of valuable fuel oil also causes fewer CO2 emissions. This means that by operating the Vitoladens 300-C, you make your personal contribution towards actively protecting the climate.

Note: This boiler is available on indent only. Please email [email protected] for pricing and more information


BR2A091 Viessmann Vitorondens 200-T Coaxial Room Sealed Diesel Boiler - 20 kW Ea






UNDERFLOOR HEATING

Visit the KE KELIT product portal to view our full range of Underfloor Heating products: products.kekelit.co.nz

Underfloor Heating 17

UNDERFLOOR HEATING PIPEKELOX ULTRAX FB KMU120 PE-RT/AI/PE-RT Pipe

ULTRAX FB pipe, oxygen and water vapour barrier; 5-layered composite pipe made of PE-RT/Al/PE-RT. Class 4 according to EN ISO 21003.

Operating conditions: tmax 70°C/10 bar, Colour: blue/transparent reel material. Supplied in coils.


7001602 KMU120 KELOX FB - Multilayer Pipe 16 x 2mm (200m) Coil



KELOX FB KU100 ULTRA PE-RT Pipe

ULTRA PE-RT pipe (Class 4 according to EN ISO 21003). Industrial surface pipe in accordance with ONORM EN ISO 22391, oxygen-tight and water vapour tight with EVOH barrier in accordance with DIN 4724. The joints can be created with KM screw fittings, with KMP, KWP, KMU and KWU fittings.

Operating conditions: tmax 70°C/6 bar.Colour: red. Supplied in coils.


7011630 KU100 KELOX FB - ULTRA PE-RT Pipe 16 x 2mm (300m) Coil

7011650 KU100 KELOX FB - ULTRA PE-RT Pipe 16 x 2mm (500m) Coil

7012030 KU100 KELOX FB - ULTRA PE-RT Pipe 20mm x 2.5mm (300m) Coil



Underfloor Heating18

KELOX KM134 Multilayer Pipe Coil - 4mm Insulation (PE-RT/AI/PE-RT)

KELOX multilayer pipe conforming to EN ISO 21003 with oxygen and water vapour barrier. 5-layer multilayer pipe made of PE-RT/AI/PE-RT.4mm soft foam insulation; closed cell: protective sleeve made of viscoplastic PE foil. Insulation thickness: 4mm. Colour: blue. Supplied in coils.Operating conditions:• Drinking water installations Class 2 according to ÖNORM EN ISO 21003.

Operating temperature: 70°C – 10 bar / tmax 80°C.• Radiator connection: Class 5 according to ÖNORM EN ISO 21003.

Operating temperature: tmax 80°C – 10 bar / tmax 90°C.



KELOX multilayer pipe conforming to EN ISO 21003 with oxygen and water vapour barrier. 5-layer multilayer pipe made of PE-RT/AI/PE-RT.9mm soft foam insulation; closed cell: protective sleeve made of viscoplastic PE foil. Insulation thickness: 9mm. Colour: red. Supplied in coils.Operating conditions:• Drinking water installations Class 2 according to ÖNORM EN ISO 21003.




7021164 KM134 KELOX Plus Pipe - 16 x 2mm, 4mm Insulation (50m) 50m

7021204 KM134 KELOX Plus Pipe - 20 x 2.25mm, 4mm Insulation (50m) 50m









KELOX multilayer pipe conforming to EN ISO 21003 with oxygen and water vapour barrier. 5-layer multilayer pipe made of PE-RT/AI/PE-RT.13mm soft foam insulation; closed cell: protective sleeve made of viscoplastic PE foil. Insulation thickness: 13mm. Colour: orange. Supplied in coils.Operating conditions:• Drinking water installations Class 2 according to ÖNORM EN ISO 21003.








UNDERFLOOR HEATING MANIFOLDSKELOX FB PROTEC KMP590E Push Manifold

Material: Stainless Steel.• Manifold with 1” moulded screw caps.• Double spindle valve per heating circuit for precise regulation of water quantity.• Water quantity meter per heating circuit.• Discharge and separate ventilation.• Factory made for easy assembly of KMP552 push manifold adapter or KMP553

push manifold adapter.


73171020 KMP590E KELOX FB PROTEC Push Manifold 2 Port (L: 225mm) Ea








731710RL KMP590E KELOX FB PROTEC Push Manifold Return Nipple Ea

731710VL KMP590E KELOX FB PROTEC Push Manifold Leader Nipple Ea





KELOX ULTRAX FB KMU590E Manifold

Stainless steel flow and return flow bar with heating circuit outlets 3/4” euro cone male thread, with bleeding and drainage at the end of the manifold, connections with screwed-in union nut 1” flat-sealing. Return flow valve top parts fit KM596 KELOX thermal motor, flow water meter adjustable of 0.5 - 5.0 l/min, including sound insulated steel consoles.

Operating conditions: tmax 70°C/6bar.Attention: Without KM220 Euro screw connection!


7902600 KMU590E KELOX ULTRAX FB - Manifold 3/4” 2 Ports (L:200mm) Ea





KELOX FB PROTEC KMP590M Push Manifold

Material: Metallic Brass.• Manifold with 1” moulded screw caps.• Double spindle valve per heating circuit for precise regulation of water quantity.• Water quantity meter per heating circuit.• Discharge and separate ventilation.• Factory made for easy assembly of KMP552 push manifold adapter or KMP553

push manifold adapter.


73174010 KMP590M KELOX FB PROTEC Push Manifold 1 Port (L: 75mm) Ea









731740RL KMP590M KELOX FB PROTEC Push Manifold Return Nipple Ea

731740VL KMP590M KELOX FB PROTEC Push Manifold Leader Nipple Ea












KELOX FB KM590E Manifold

Flow and return flow bars with 3/4” heating circuit outlets euro cone male thread, with bleeding and draining at the highest point, manifold ends. Closed, connections with moulded 1” union nut, flat-sealing, manifold ends with 1” male thread, for screwing together individual manifold bars without additional shaped connectors, double spindle valve on flow.Pre-settable, top sections fit KM596 KELOX thermal motor, on return flow, water volume meter (0.5 - 2.5 l/min), brass with non-porous metal plating, including signs that can be labelled for each heating circuit and noise insulated metal consoles. Extension module (1 circuit) without drainage, bleeding and metal console.

Operating conditions: tmax 80°C/6bar.Attention: without KM220 Euro screw connection!


7901500 KM590E KELOX FB Manifold 1 Port (L:75mm) Ea

7902500 KM590E KELOX FB Manifold 2 Ports (L:175mm) Ea







UNDERFLOOR HEATING MANIFOLD HOUSINGSKELOX KM570 Universal Manifold Housing Frame

Sendzimir zinc-coated universal sheet steel cabinet, connection option from below or on the side, height-adjustable feet, plaster trim element below the cabinet, (width 120mm), upgradeable with a surface-mounted or flush-mounted visible part.

Number of manifold outputs on KM590E KELOX FB manifold coordinated!

Cabinet depth: 75mm.


9000500 KM570 KELOX Universal Manifold Housing Frame 1-4 (L:460mm) Ea



9000800 KM570 KELOX Universal Manifold Housing Frame Special Size (L:1150mm) Ea

KELOX KM570F Universal Manifold Housing Frame

Sendzimir zinc-coated universal sheet steel cabinet, connection option from below or on the side, height-adjustable feet, plaster trim element below the cabinet, (width 120mm), upgradeable with a surface-mounted or flush-mounted visible part.

Suitable for the installation of KM650 KELOX FB fixed-value control set. Number of manifold outputs on KM590E KELOX FB manifold coordinated! Cabinet depth: 110mm, Installation height: 600mm above the finished floor.


9000510 KM570F KELOX Universal Manifold Housing Frame 1-4 Ports (L:460mm) Ea



9000810 KM570F KELOX Universal Manifold Housing Frame Special Size (L:1150mm) Ea


KELOX KM571 Door for Concealed Housing

Sendzimir zinc-coated, lockable front doors and frame, powder-coated, plaster trim from manifold cabinet carcass max. 120mm under the front door, upgradeable with a cylinder lock.

Colour: white (RAL 9010), Height: 530mm.


1001004 KM571 KELOX Cylinder Lock for Door Ea

9000550 KM571 KELOX Door for Concealed Housing 1-4 Ports (L:530mm) Ea



9000850 KM571 KELOX Door for Concealed Housing Special Size (L:1220mm) Ea

KELOX KM572 Surface Mounted Housing

Sendzimir zinc-coated, depth adjustable surface-mounted visible part with magnetic bracket, powder-coated.Colour: white (RAL 9010), Installation depth: 130mm, Installation height: 670mm above the finished floor.


9000580 KM572 KELOX Door for Surface-Mounted Housing 1-4 Ports (L:530mm) Ea



9000880 KM572 KELOX Door for Surface-Mounted Housing Special Size (L:1220mm) Ea

KELOX ULTRAX KMU577K Manifold Cabinet with Plastic Panel

Galvanised universal sheet steel cabinet with telescopic pull-out frame, connection option from below or on the side, height adjustable feet, plaster trim element below the cabinet, incl. on the back and the plaster trim element 60mm protruding plastering mesh and plastering protection for the inside of the cabinet. Number of manifold outputs in KMU590E KELOX-ULTRA X FB manifold coordinated!

Colour: RAL 9010, Cabinet depth: 75 - 120mm, Installation height: 600mm above the finished floor.


9000530 KMU577K KELOX-ULTRAX Universal Manifold Housing Set 1-3 Ports (L:400mm) Ea





UNDERFLOOR HEATING FIXINGSWinkler - Claw Clip

Clip suitable for fast underfloor tube laying on wire mesh with an OD from 3 to 8 mm.Securely fastened to the mesh. Tough clip which can be used at all temperatures.Can also be used with foil covered floating screed systems.Tooling available for fast and easy setting of the clip due to its special clip magazine, allowing for mounting of the clip in the upright position.

Can be used with the Winkler Clip Fixing Tool (KRS1420-3-6).


KR1420-3 WINKLER Claw Clip (3mm Mesh) for 16mm and 20mm Pipe - 400 Clips Box





Winkler - Mounting Clip

Mounting clip for installation with wire mesh for tubes with an OD of 20 - 26 mm. These clips allow for easier fitting compared with cable ties.

Every laying distance is possible with every wire mesh diameter from 3 - 8mm.

The clip can easily be dismantled and fixed again.

No tube will can come off due to the tight design of the clip.


IF2026 WINKLER Mounting Clip Indufix IF Ea

KELOX FB KM611 Staples

KELOX FB staples for fixing KELOX FB pipe onto the KM635 staple plate.

Magazined with 25 units each, require 2-3 units per running metre of pipe.


1008040 KM611 KELOX FB Tacker Hooks 40mm (1000 Per Box) Box


KELOX FB KM635 Staple Plate

KELOX FB KM613 Fixing Plate

Lambdapor made of expanded polystyrene EPS-T 650 plus 033 in accordance with ONORM B 6000, free from HFC and CFC, lamination HDPE fabric with PE coating, incl. adhesive overlapping edge, for stapling and fastening the KELOX FB pipe with KM611 staples

Thickness: 28/25mm, Load-bearing capacity: max. 6,5 kN/m², Load-bearing capacity: max. 10 kN/m², Lambda value: 0.033 W/mK, Dynamic rigidity: in accordance with ONORM EN 29052 -1 < 20 MN/m3, Coefficient of water vapour diffusion: 250.000 My, Reel material: 10 x1m, Graduation: 50mm.Polystyrene EPS-plus T 1000, with a compressive strength of max.10 KN.

Deep-drawn pipe holding nubs for sturdy fastening of the KELOX module pipe d16mm, connection of the individual plates by overlapping.One longitudinal and one lateral edge is designed as a scaled-down father nub, which is marked with the KELIT logo in between the nubs, the installation should preferably start on the right-hand side of a room.

Installation distance: ID 5, 10, 15, 20, 25 and 30cm. Height: 20mm

Attention: due to overlapping, add 10% additional requirement!

CODE

CODE

DESCRIPTION

DESCRIPTION

UNIT

UNIT

6060700

6106310

KM635 KELOX FB Tacker Plate 28/25-6.5kN (10m2/roll)

KM613 KELOX FB Fixing Plate 1.45m x 0.85m (160/pallet)

Ea

Ea

6060750 KM635 KELOX FB Tacker Plate 28/25-10kN (10m2/roll) Ea

UNDERFLOOR HEATING ACCESSORIESKELOX FB PROTEC KMP552 Push Manifold Adapter

Ensures safe and simple mounting of pipes and push manifold.• To be used in combination with KMP590M FB push fitting manifold and

KMP590E FB stainless steel push fitting manifold.• Compatible with all KELOX pipes 16 and 20mm.


73175B00 KMP552 KELOX FB PROTEC Push Manifold Adapter 16mm Ea

73175D00 KMP552 KELOX FB PROTEC Push Manifold Adapter 20mm Ea


KELOX KM220 Euro Thread Fitting

For connection to installation components with 3/4” eurocone (male thread).

Brass with non-porous metal plating, including nut with female thread, support sleeve with O-rings and clamping ring.


7701090 KM220 KELOX Euro Thread Fitting - 16mm x 3/4” Ea

7701120 KM220 KELOX Euro Thread Fitting - 20mm x 3/4” Ea

KELOX KM593A Connection Set

For manifold connection.

Reduction or nub flat-sealing brass pore-free metal-plated.


9004420 KM593A KELOX Connecting Set 1” x 1” Nipple Ea

KELOX KM593E Connection Ball Valve

Connection ball valves in straight or elbow shape for shutting off the manifolds.

Flat-sealing male thread to the manifold bar including seal (RF-elbow extended) brass non-porous metal.


9004700 KM593E KELOX Ball Valve Set 3/4” x 1” (F/M) Straight Ea

9004750 KM593E KELOX Ball Valve Set 3/4” x 1” (F/M) Elbow 90° Ea

9004800 KM593E KELOX Ball Valve Set 1” Straight Ea

9004850 KM593E KELOX Ball Valve Set 1” Elbow 90° Ea

KELOX FB PROTEC KMP553 Push Manifold End Cap

Ensures safe and simple closure of unnecessary manifold outlets.• To be used in combination with KMP590M FB push fitting manifold and KMP590E

FB stainless steel push fitting manifold.


73178BD0 KMP553 KELOX FB PROTEC Push Manifold Cap Ea


KE KELIT K87 90° Elbow Bracket

90° elbow bracket for insertion and attachment of flexible pipes.

Constructed for plastic.


2679022 K87 KELIT Pipe Clasp 90° KWS d16 (5 Per Bag) Ea

KELOX KM596 Actuator

For attachment to KM590E, KMU590E, KU590 and KC 590 with adapter for thread M30 x1.5mm incl. “first option function”, half opened in new condition 230V-AC: Start-up current 550mA/1W, 24V - AC/DC: Start-up current 300 mA/1W, IP Code/class IP 54, Travel: 4.0/5.0mm, Standard: “current-less closed”.Current-less open on request!


9005050 KM596 KELOX FB Actuator 230 Volt Currentless Closed Ea

9005040

9005020

KM596 KELOX FB Actuator 24 Volt Currentless Closed

KM596 KELOX FB Actuator 230 Volt Currentless Open

Ea

Ea

KELOX FB KM650 Fixed-Value Control Set

KELOX FB single zone control unit regulates the temperature of individual floor heating loops. It works at the temperature level of radiator heating (e.g. 70/55°C).

Minimum depth required for the manifold box is 110mm

Comprised of: High efficiency Wilo pump – Yonos-Para 15/6, temperature monitor, thermostatic valve, thermostatic head, three-way valve and two female thread ball valves ¾”. All the components are connected to the manifold, ready for use.

The unit is compatible with all 1” KELOX floor heating manifolds. Extra width of 220mm is required.


7952000 KM651 KELOX FB Fixed Value Control Set for 1” Manifold Type 2 Ea


UNDERFLOOR HEATING INSULATION STRIPSKELOX FB KM634 Edge Insulation

Edge insulation with reverse side self-adhesive incl.

Made of foamed PE, Reel Length 25m.


6060100 KM634 KELOX FB Insulating Edges 8mm x 150mm x 1m (200 Per Box) Box

KELOX KM592E Manifold Accessories

Fill and drain valve and contact thermometer as replacement parts for the KM590E manifold.

Fill and drain valve - 3/8” elbow 90°Contact thermometer - d35mm to 80°C.


UNDERFLOOR HEATING SPARE PARTS

9004435 KM592E KELOX Plug 3/8” Elbow 90° for KM590E Manifold Ea

9004440 KM592E KELOX Contact Thermometer d35mm up to 80°C Ea

RADIATORS

Visit the KE KELIT product portal to view our full range of Radiators: products.kekelit.co.nz

Radiators30

S0075 Jasmine

S0145Creme White

S0146 Anodic Bronze

S0091 Pergamon

S0142 White Textured 1

S0104 Metal Black 2

S0094 Natura

S0141 Black Textured 1

S0144 Brown Grey

S0087 Bahama Beige

S0147 Anodic Brown

S0143Light Grey

S0084 Anemone

S0148 Anodic Black

S0077 Magnolia

S0149 Anodic Natura

S0164 Banana

S0201 Metal Alu 2

S0088 Manhattan

S0102 Metal Grey 2

RAL 9016

1 With structured surface 2 With rough surface

Traffic White

RAL 9010 Pure White

RAL 6034 Pastel Turquoise

RAL 5001

ULOW-E2 low temperature radiators are only available in RAL 9016 Traffic White and in bicolour design (RAL 9005 Jet Black and RAL 9006 White Aluminium).

The colours shown here are not binding. Colour variations are possible due to print-technical reasons.

Other colours are available on request!

Green Blue

RAL 4002 Red Violet

RAL 4007 Purple Violet

RAL 6019 Pastel Green

RAL 7040Window Grey

RAL 9006 White Aluminium

RAL 9001 Cream White

RAL 5014 Pigeon Blue

RAL 9005 Jet Black

RAL 120 80 60 Modern Green

RAL 7001 Silver Grey

RAL 9007

AluminiumGrey

RAL 7021 Black Grey

RAL 120 70 70 E-Green

RAL 7037 Dusty Grey

RAL 250-2 Lemon Glow

RAL 5009 Azure Blue

RAL 1033 Dahlia Yellow

RAL 290 40 45 Mystic Purple

RAL 150 60 60 Green Apple

RAL 6004 Blue Green

RAL 7030 Stone Grey

RAL 1023 Traffic Yellow

RAL 5015Sky Blue

RAL 2003 Pastel Orange

RAL 4009 Pastel Violet

RAL 6033 Mint Turquoise

RAL 8019 Grey Brown

RAL 7013 Brown Grey

RAL 1012 Lemon Yellow

RAL 5017 Traffic Blue

RAL 2004 Pure Orange

RAL 8017 Chocolate Brown

RAL 7015 Slate Grey

RAL 1004 Golden Yellow

RAL 5022 Night Blue

RAL 3000 Flame Red

RAL 3015 Light Pink

RAL 040 80 05 White Coffee

RAL 7016 Anthracite Grey

RAL 1027 Curry

RAL 5002 Ultramarine Blue

RAL 3005 Wine Red

RAL 3014 Antique Pink

RAL 7035 Light Grey

RAL 7024 Graphite Grey

RAL 290 70 20 Mauve Haze

RAL 4008 Signal Violet

Standard Colour

RAL Colours

Sanitary Colours

Special Colours

RADIATOR COLOUR OPTIONSVogel & Noot Panel Radiators are available in a vast range of colours (as can be seen below).

Vogel & Noot Design Radiators are available in a selection of colours.

Please contact KE KELIT for more information on colouring options: [email protected]

Radiators 31

RADIATOR BRACKETS

PANEL RADIATORS

Sigarth - Radiator Mounting Brackets

This bracket grips onto the upper and lower welding seam of the radiator. A special accessory can be put onto the bracket to prevent unintentional lift-off.

The bracket top part is made from galvanised sheet steel 1.25mm in combination with fiberglass reinforced plastic. The bracket rail is made from galvanised sheet steel 1.5mm, alternatively plain sheet steel 1.5mm for powder coating. There is a plastic inlay in the bracket foot.

ALL VOGEL & NOOT PANEL RADIATORS REQUIRE SIGARTH MOUNTING BRACKETS


Vogel & Noot - T6 Centrally Connected Radiator - Type 22

Made of cold-rolled sheet steel according to EN 442, stable, well-designed profiling with 40mm profiling intervals, primer annealed at 190°C, complete with lacquer in the form of electrostatic powder coating according to DIN 55900, part 2, in RAL 9016, annealed at 210°C object temperature.

Suitable for manual or thermostat operation, variable connections suitable for copper, steel, plastic and metal-composite tubes; connections: 4 x G ½ I.G. and 2 x G ¾ A.G. at the bottom centre.

Performance-tested according to DIN EN 442.



T6C22400060 T6 Centrally Connected Radiator Type 22 (HxW=0400x0600, 814W) Ea





51164002 SIGARTH MCA Radiator Bracket for Types 20 - 33 Up to HxW 400x1600mm 2 Brackets





MCA3001600 SIGARTH MCA Radiator Bracket for Types 20 - 33 Up to (HxW) 300 x 1600mm 2 Brackets

MCA5001600 SIGARTH MCA Radiator Bracket for Types 20 - 33 Up to HxW 500 x 1600mm 2 Brackets

Radiators32





























Radiators 33














NOTE: These radiators are available through indent. Please contact KE KELIT Climate Control for more information: [email protected]

Vogel & Noot - T6-Plan Centrally Connected Radiator

The T6-Plan centrally connected radiator with the revolutionary centrally connected radiator-technology completely redefines the radiator planning, installation and operation.

The T6-Plan centrally connected radiators are side-variable, variable in installation, size, connection, and type, and all pre-adjustments have been made. Equal heat distribution with maximum flexibility.• All the benefits of the leading T6-Technology.• Easy to clean, smooth surface.• Best thermal comfort.• Integrated value technique with pre-adjustments.• Colour coating available.


Radiators34

Vogel & Noot - Centrally Connected Vertical Radiators

With the expressive Profile of the vertical centrally connected radiators, new standards will be defined. Wide, curved strips create bright, dark contrasts. Lower rooms seem to be higher. A constant game with light and shades make a radiator to an emotional centre of the room. Made for people who know what they want.• The slim space heating solution.• Perfect cost/performance ratio.• Wide range of types.• Wide range of colours available.• The perfect solution when little space is available.• Also available in Plan Vertical Centrally Connected Radiator.


Vogel & Noot - ULOW-E2 Low Temperature Radiator

The ULOW-E2 ultra-low temperature radiator is a combination of a T6 central connection radiator, type 22, and a dynamically regulated fan unit that is activated automatically at full load, depending on the relevant pre-settings, therefore allowing significantly increased heat output. Due to these features, the Vogel & Noot ULOW-E2 can be used for all low-temperature and ultra-low temperature cycles (e.g. 40/35; 35/30...)

Connection: 4 x G 1/2 I.G. and 2 x G 3/4 A.G. at the bottom centre.Thermostat valve at the top right (can be changed to top left without any problem).Performance-tested according to DIN EN 442.



E2L2260004 ULOW E2 Low Temperature Radiator Type 22 (HxW=0600x0400, 272W) Ea









MYSON - KICKSPACE Radiator

A classic space saving solution. Clever by design, the KICKSPACE unit fits neatly within a unit plinth or floor cavity providing a fresh thinking, innovative heating solution. Where traditional radiators take up precious wall space and restrict design possibilities, the KICKSPACE heater allows freedom to tailor your home around your lifestyle.


Radiators 35

LASERLINE COLUMN RADIATORSVogel & Noot - Laserline Centrally Connected Radiator

Design Column radiators made from precision-engineered steel pipes and fully laser welded head pieces connected to completed radiators. Only an even number of elements is possible.Pipes and head pieces flattened on the exterior to increase heat output. No protruding welding burrs either inside or outside. With built-in control valve.

Max operating temperature: 110°C/10 Bar

The Laserline Centrally Connected Radiators are available in 2 column, 3 column, 4 column, 5 column and 6 column.They range from 155mm in height to 3000mm in height, with the option of 200mm in length to 1500mm in length.


Vogel & Noot - Laserline Standard Radiator

Design Column radiators made from precision-engineered steel pipes and fully laser welded head pieces connected to completed radiators or blocks.Pipes and head pieces flattened on the external sides to increase the heat output. No protruding welding burrs either inside or outside. The boss spacing is the overall height minus 65mm. Connections for the supply, return, vent plug and drain located on the front. The surfaces have been pre-treated and subject to electrophoretic immersion coating and cured powder coating.

Max operating temperature: 110°C/10 Bar

The Laserline Standard Radiators are available in 2 column, 3 column, 4 column, 5 column and 6 column.They range from 155mm in height to 3000mm in height, with the option of 200mm in length to 2500mm in length.


Vogel & Noot - Laserline Architecture Heated Bar Table

The latest heating technology, innovative design and practical options for seating or storage are combined in the Architecture model.

The Architecture model is testament to the fact that radiators not only provide heat, but also combine design and function. It is a modern tube radiator and bench/counter all rolled into one.

Available in 4 column and 5 column models.


Radiators36

CONVECTORS

Vogel & Noot - Laserline Architecture Heated Bench

The latest heating technology, innovative design and practical options for seating or storage are combined in the Architecture model.

The Architecture model is testament to the fact that radiators not only provide heat, but also combine design and function. It is a modern tube radiator and bench/counter all rolled into one.

Available in 6 column model.


MYSON - iVECTOR Fan Convector

The iVECTOR is the first in a new generation of intelligent fan Convectors. It has been designed specifically to combine all the traditional advantages of a fan convector with a range of new product features made possible by our latest energy efficient heating technology.• High heat outputs at low water temps.• Cooling capacity.• 2 and 4 pipe configuration for zoning.• Intelligent controls with BMS capabilities.• Quiet.• Easy to Install. Can mount on floor or wall with new front return style.


IV100 MYSON Fan Convector - iVECTOR 2P (HxW=600x1000) Ea





Vogel & Noot - KONTEC Convector

KONTEC Convectors and heating panels are noted for their precise lines and wide range of capacities, sizes and colours.

The KONTEC Convectors and heating panels are available in both horizontal and vertical models, with 71 colour options available.

NOTE: These Convectors are available through indent. Please contact KE KELIT Climate Control for more information: [email protected]

Radiators 37

TRENCH CONVECTORS

Vogel & Noot - VONARIS Convector

VONARIS Convectors and heating panels are recognised for their design and performance as a complete package for elevated requirements.

Available in Solaris finished models and centrally connected models (VONARIS-M).

The VONARIS and VONARIS-M Convectors and heating panels are available in both horizontal and vertical models, with 71 colour options available.


Vogel & Noot - INTRATHERM Floor Trench Convectors

The Intratherm trench heating convectors provide excellent performance with their natural or fan assisted convection and soundless operation.

Available in the following systems:• FMK - Natural convection.• F1T - Forced convection with EC cross-flow fan.• F1P - Forced convection with EC tangential fan (higher fan power).• F2C - Forced convection with EC cross-flow fan for heating or cooling, 2 pipe

system.• F4C - Forced convection with EC cross-flow fan for heating or cooling, 4 pipe

system.

Options of roll grates or rigid linear grates. Available in wood, stainless-steel or aluminum.


DESIGN RADIATORSVogel & Noot - BAWA

The reductionist design and clear lines make the BAWA model an all-time star. The paired heating pipe arrangement results in a stylish unit that fits perfectly into any existing living space.

The BAWA design radiator is flexible with its 3 connection variants: centre connection valve, standard connection and electrical version.

Also available in SPA version (pictured on the right) and Twin version.


Radiators38

Vogel & Noot - SEWA

These design radiators are at once modern and fashionable, and at the same time ageless. They are steel-made from top quality circular or flat precision heating and assembly pipes, connected by pressure resistant welding (no visible weld seams) where all pipe ends are sealed by special friction welding. They are covered by means of high-quality decor elements, and available as valve model with central connection and integrated thermostat head, suitable for angled or through-flow connection. The maximum positive operating pressure is 5 bar, the test positive pressure is 13 bar, the maximum operating temperature is 110°C. Delivered with towel rail. Includes dummy plug and vent plug, and a wall mounting set matching the radiator colour, suitable for both horizontal and vertical radiator alignment. It is possible to install an electric heating element.


Vogel & Noot - FATALA

The FATALA model is the choice for lovers of clear formal expression, who are also taken by its delicate elegance. The possibility of connection on either side ensures great position flexibility.

This space saving model is also available in an electric version.

Also available in SPA version (pictured on the right) and an electric version.


Vogel & Noot - NERO

The NERO model is extraordinarily expressive thanks to its striking design, an effect that is reinforced by its comprehensively varied colouring and the profile edging frame open on one side. The chrome-plated profile edging frame adds weight to the independent design concept of this model.

The variable surfaces create harmony and provide living spaces with an atmosphere that is both comfortable and refined - including an unmistakable touch of luxury.

A choice of many exclusive decor variants is available.


Vogel & Noot - OHIO

With the OHIO model rooms not only get reliable heat emission, but also a highly attractive work of art as a rewardingly extravagant eye catcher.

Bring out everything to perfection with individual linear decorative strips.

This design radiator is available in 45 different colours.


Radiators 39

Vogel & Noot - LOWA

The LOWA model is amongst the most fascinating design radiators with its harmonious flat pipe design and contemporary purism. Its high functionality fits seamlessly into an architectural concept.

A practical laundry drying function coupled with high heating power make a multi-functional heating fitting out of this model.


Vogel & Noot - ARUN-TWIN

The ARUN-TWIN model is the choice for perfectly tasteful and functional partitioning of living space. It is convincing with its striking design and high flexibility: variable wall installation possible with no limitations.

Elegance down to the last detail guarantees a sophisticated interior design.


Vogel & Noot - CAVALLY

The universal CAVALLY model design comes to optimal effect in all rooms. A timeless formal expression that is understood and valued everywhere. Also available as a centre-connection valve model.

The slightly arched pipe installation has an independent effect and it offers numerous storage possibilities.


Vogel & Noot - FULDA

The remarkable point about the FULDA model is the uniquely lively verve it achieves with its symmetrical deviation. Restrained understandment in a symbiosis with effervescent energy.

Also available as valve, energy and centre-connection valve models.

Available in white, chrome and gold colours.


Radiators40

Vogel & Noot - VELINO

The VELINO model has a name that gives expression to its affinity for all things to do with waves. It gives any room a bracing verve that is unique and exceptional. The striking resemblance it has to a wardrobe blurs the borderline impressively between furnishings and radiators.

Vertical heating pipes strengthen the impression of room height and take good care of reliable and space saving heating.


Vogel & Noot - KASAI

The playful design with the heating pipes arranged on both sides has raised the KASAI model to cult object status with a powerful drive for recognition. The side variation for the pipes direction creates an interesting tension - that gives any living space that certain something.

The unique heating pipe arrangement makes drying and hanging laundry child’s play.


TOWEL WARMERSMYSON - Avonmore

Curved multi-rail design with chrome finish that is available in a range of sizes. This makes it an extremely popular specification product for new build. It is highly functional for heating, with good outputs and it has tube spacing for practical towel placement. With three different rail configurations, this is a flexible choice for any project.

Tested to BS EN 442 and carries the CE mark of approval.


ECOC125 MYSON Avonmore Curved Chrome Towel Warmer (HxW=1222x500, 395W) Ea






Radiators 41

Vogel & Noot - DION-VM

The DION series is impressive due to its modest, stylish design of a rounded-tube radiator. The DION-VM is the extended version with central connection and stands out for its harmonious interplay of cosiness and aesthetics.

Your benefits: The horizontally arranged, narrow heating tubes create space for hand towels and bath towels and provide additional storage space for your bathroom.


DIVMTW1100050

DION-VM Towel Warmer (HxW=1100x0500, 568W) Ea

DIVMTW1100060


DIVMTW1800050


DIVMTW1800060


TOWEL WARMER ACCESSORIESVogel & Noot - PTC Electric Element

Electric Element for Towel Warmers used to ensure you have warm towels in the summer months when the central heating system is shut down.

(NO SWITCH & NOT FOR LOWA-VM, SEWA, OHIO VSM & VELINO).


IP64PTCNS300

Towel Warmer PTC-Electric Element 300W (NO SWITCH & NOT FOR LOWA-VM, SEWA, OHIO VSM & VELINO)

Ea

Vogel & Noot - Adapter Tee for Element

A special adapter needs to be used for Design radiators without a 1/2“ socket for the electrical heating element, as shown in the adjacent diagram.

Applies to the following models: AVONMORE, BAWA, CAVALLY, FULDA, and FATALA/standard design.


BRACC00260 Bathroom Radiator Accessory: Special Connection Piece (Chrome) Ea

Radiators42

Simplex - Towel Rail Valve Set

For Compact and Design Radiators. Consisting of: 1 pc. Comap valve base D3804 with pre-adjustable valve insert, sensor connection M 30 x 1.5, for connection with compression adapters, 1 pc. Shut-off lock-shield valve, for connection with compression adapters. With connection nipples and O-Ring seal, for compact and design radiator with Rp 1/2 connection. Continuously pre-settable to 10 different positions. Chrome-plated.

Max. Operating Pressure: 10 bar, Max. Operating Temperature: 110°C.


Simplex - Regulator Valve

The Simplex VARIODESIGN Thermostatic Valve Set is suitable for towel and design radiators with Rp 1/2 or G 3/4 m Euro taper radiator connections. It is a combination of angle and straight design, the thermostat can be converted for right or left connection. The valve insert with sensor connection M 30 x 1.5 can be preset using a special key. The fitting has an integrated fill and drain valve for hose connections.


C3804324 SIMPLEX - Design Thermostatic Valve Set Angle D3804, 1/2” x 3/4” Male Threads Euro Taper, Chrome

Ea

C3805324 SIMPLEX - Design Thermostatic Valve Set Straight D3805, 1/2” x 3/4” Male Threads Euro Taper, Chrome

Ea

F12060 SIMPLEX - VARIODESIGN Regulator Valve Set, 3/4” Female Thread x 3/4” Male Thread, White

Ea

F12061 SIMPLEX - VARIODESIGN Regulator Valve Set, 3/4” Female Thread x 3/4” Male Thread, Chrome

Ea

Vogel & Noot - Design Valve Set VHX-D/RAX

VHX set developed for use on design radiators. Straight, dual 50mm connection.

Includes RAX sensor and thermostatic head for room, temperature regulation.


DRACC00380 Design Radiator Accessory: Design Valve Set VHX-D/RAX STRAIGHT (Traffic White) Ea

Radiators 43

MEIBES - Thermostatic Valve Body

Thermostatic valve lower parts. For use in two-pipe pump heating systems with normal temperature spread. Precise, step-less presetting, flow rates adjustable.

Double O-Ring seal, protective cap white, nickel-plated. For quiet operation, the differential pressure should not exceed the thermostatic valve approx. 0.2 bar.


1238041 MEIBES Thermostatic Valve Body, Type S721.11 Straight Pattern DN 15 Ea

1238051 MEIBES Thermostatic Valve Body, Type S721.11 Straight Pattern DN 20 Ea

1238101 MEIBES Thermostatic Valve Body, Type S722.11 Elbow Pattern DN 15 Ea

1238184 MEIBES Thermostatic Valve Body, Type S726.11 Axial Pattern DN 15 Ea

HEATING CONNECTION VALVES

Simplex - Sensitive Design Thermostatic Heads - Double Angled Design

Consisting of:1 pc. Comap valve base D3420 with pre-adjustable valve insert, sensor connection.M 30 x 1.5, for connection with compression adapters.1 pc. shut-off lock-shield valve, for connection with compression adapters.With connection nipples with O-Ring seal, for compact and design radiator withRp 1/2 connection.• Brass.• EPDM.• Chrome or Stainless Steel.


KELOX KM595Z Two Pipe Radiator Block

For valve radiators with two pipe connections. Straight-way or corner connections. Individual radiator connections can be isolated.

Supplied in packs of 10.


9005105 KM595Z KELOX Two Pipe Radiator Block, Double Angle Connection Ea

9005110 KM595Z KELOX Two Pipe Radiator Block, Double Straight Connection Ea

CL342002001 SIMPLEX - Design Thermostatic Valve Set Double-Angle D3933, 1/2” x 3/4” Male Threads Euro Taper, Chrome

Ea

CL342003001 SIMPLEX - Design Thermostatic Valve Set Double-Angle D3933, 1/2” x 3/4” Male Threads Euro Taper, Stainless Steel

Ea

Radiators44

Simplex - One Pipe Valve Block

Connection valve with back-flow retardant, radiator supply ratio 30-100 % (factory set to 35%), with ball shut-off, control head with a concealed stop, for connection with compression adapters, 50mm axial distance.

Valve can also be used in two-pipe operation. To this the throttle spindle must be turned to right until it is fully closed. This completely shuts off the bypass.

Body: Nickel-plated brass.Seal: EPDM.Max. operating pressure: 10 bar.Max. operating temperature: 110°C permanent temperature, 130°C short-term.


Simplex - Crossover Valve

Reverser with shut-off for reversed supply and return flow. For connections without crossovers for interchanged supply and return pipes. Stylish, disappears under radiator. For connection with compression adapters, 50mm axial distance. With cone inserts for radiators with integrated valve with G 3/4m Euro taper connection.Nickel-plated brass, EPDM, PTFE construction.


MYSON - Automatic Bypass Valve

The MYSON Auto By-Pass valve is designed for use in domestic central heating systems. Its purpose is to maintain constant pump pressure within the system.The Auto By-Pass valve automatically opens and closes depending on system load. When the Thermostatic Radiator Valves are opened and calling for heat the Auto By-Pass valve remains closed. This allows the full output of the boiler and pump to circulate through the system. As sections of the heating system close down the Auto By-Pass valve opens to allow water to flow through the by-pass.


ABV22 MYSON Automatic Bypass Valve Angle Ea

F10007 SIMPLEX - EXCLUSIV H-Module E2/50, 3/4” Female Thread x 3/4” Male Thread, Angle, for 1-Pipe System, with Cone Insert

Ea

F10005 SIMPLEX - EXCLUSIV H-Module D2/50, 3/4” Female Thread x 3/4” Male Thread, Straight, for 1-Pipe System, with Cone Insert

Ea

F10078 SIMPLEX - Reverser with Shut-off D2/50, 3/4” Female Thread x 3/4” Male Thread, Straight, for Reversed Supply and Return Flow, with Cone Insert

Ea

F10079 SIMPLEX - Reverser with Shut-off E2/50, 3/4” Female Thread x 3/4” Male Thread, Angle, for Reversed Supply and Return Flow, with Cone Insert

Ea

Radiators 45

Simplex - Radiator Lock-Shield Valve - Type M

Self tightening with self-sealing thread, drain and fill without adapter by simply attaching a standard hose connection.• Straight or angle.• Body: Nickel-plated Brass.• Seal: EPDM.• Max. operating pressure: 10 bar.• Max. operating temperature: 110°C permanent temperature, 130°C short-

term.


Simplex - Radiator Lock-Shield Valve - Type N

Self tightening with self-sealing thread, drain and fill without adapter by simply attaching a standard hose connection.• Straight or angle.• Body: Nickel-plated Brass.• Seal: EPDM.• Max. operating pressure: 10 bar.• Max. operating temperature: 110°C permanent temperature, 130°C short-

term.


Simplex - Pressure Test Bridge

Pressure test bridge for H-module connection. For pressure testing, venting and draining.

Fixed axial distance of 50mm, Reduced installation time, Reusable Pressure test bridge. Reusable, with air plug, connection of fill and drain plugs possible. Plastic, EPDM construction.


F10088 SIMPLEX - Pressure Test Bridge for H-Module Connection, 15mm, with Air Plug Ea

F10098 SIMPLEX - Pressure Test Bridge for H-Module Connection, 3/4” Euro Taper, with Air Plug

Ea

F11903 SIMPLEX - Shut-off Lockshield Valve IG/M, 1/2” Male Thread x 1/2”, Straight, with Drain

Ea

F11907 SIMPLEX - Shut-off Lockshield Valve IG/M, 1/2” Male Thread x 1/2”, Angle, with Drain Ea

F11911 SIMPLEX - Shut-off Lockshield Valve AG/M, 1/2” x 3/4” Male Thread Euro Taper, Angle, with Drain

Ea

F11910 SIMPLEX - Shut-off Lockshield Valve AG/M, 1/2” x 3/4” Male Thread Euro Taper, Straight, with Drain

Ea

F10378 SIMPLEX - Shut-off Lockshield Valve IG/N, 1/2” Male Thread x 1/2”, Straight Ea

F10379 SIMPLEX - Shut-off Lockshield Valve IG/N, 3/4” Male Thread x 3/4”, Straight Ea

F10374 SIMPLEX - Shut-off Lockshield Valve AG/N, 1/2” x 3/4” Male Threads Euro Taper, Straight

Ea

F10375 SIMPLEX - Shut-off Lockshield Valve AG/N, 1/2” x 3/4” Male Threads Euro Taper, Angle Ea

F10383 SIMPLEX - Shut-off Lockshield Valve IG/N, 3/4” Male Thread x 3/4”, Angle Ea

Radiators46

Simplex - EXCLUSIV Single Valve

With ball shut-off, control head with concealed stop. With cone inserts for radiators with integrated valve, with G 3/4 m Euro taper connection.• Straight or Angle.• Nickel-plated brass.• EPDM, PTFE.


Simplex - VARIOCON U Connection Valve

For one-pipe (radiator supply ratio 25 - 100 %) or two-pipe operation, can be used as an angle or straight connection valve, left or right connection, draining or filling without adapter, with shut-off, for connection with compression adapters,50mm axial distance, 25mm axial offset.• Nickel-plated brass.• EPDM, PTFE.• Dimensional drawings.• Straight and angle.


Simplex - VARIOCON N Connection Valve

Can be used as an angle or straight connection valve, left or right connection, with shut-off, for connection with compression adapters, 50mm axial distance, 25mm axial offset.• Nickel-plated brass.• EPDM, PTFE.• Straight and angle.


F10020 SIMPLEX - EXCLUSIV Single Valve D2/AG, 3/4” Female Thread x 3/4” Male Thread, Straight, with Cone Insert

Ea

F10021 SIMPLEX - EXCLUSIV Single Valve E2/AG, 3/4” Female Thread x 3/4” Male Thread, Angle, with Cone Insert

Ea

F10024 SIMPLEX - EXCLUSIV Single Valve D2/IG, G3/4” Female Thread x 1/2”, Straight, with Cone Insert

Ea

F10025 SIMPLEX - EXCLUSIV Single Valve E2/IG, G3/4” Female Thread x 1/2”, Angle, with Cone Insert

Ea

F10027 SIMPLEX - VARIOCON H-Module U2, 3/4” Female Thread x 3/4” Male Thread, Straight and Angle, Swivelling, with Cone Insert and Drain

Ea

F12002 SIMPLEX - VARIOCON H-Module N2, 3/4” Female Thread x 3/4” Male Thread, Straight and Angle, Swivelling, with Cone Insert

Ea

Radiators 47

Simplex - VARIOCON FE Connection Valve

Can be used as an angle or straight connection valve, left or right connection, draining or filling without adapter, with shut-off, for connection with compression adapters, 50mm axial distance, 25mm axial offset.• Nickel-plated brass.• EPDM, PTFE.• Straight and angle.


HEATING CONNECTION VALVE ACCESSORIESKELOX KM220 Euro Thread Fitting

For connection to installation compo

Documents

Heating Systems Product CatalogueViessmann Vitodens 100-W LPG System Boiler 26kW Ea Ea 7639527 B1HD002 Viessmann Vitodens 100-W Natural Gas System Boiler 35kW Viessmann Vitodens 100-W