® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 1 10.21.11

Hi-lumeR A-Series Driver Overview Forward Phase Control

Hi-lume® A-Series Driver is a high-performance LED driver that provides smooth, continuous 1% dimming for virtually any LED fixture, whether it requires constant current or constant voltage. It is the most versatile LED driver offered today due to its compatibility with a wide variety of LED arrays, multiple form factors, and numerous control options.

Features

•Continuous,flicker-freedimmingfrom100%to1%.•GuaranteedcompatibilitywithselectedNovaT*®,

Maestro Wireless®, Radio RA® 2,HomeWorks® QS, GrafikEye®QS,GrafikSystem™, Quantum® and Stanza® dimmers. Please see chart at the end of this document or contact Lutron for details regarding compatible controls.

•100%performancetestedatfactory.•100%burnedinatfactory.•Aratedlifetimeof50,000hours@tc = 149 °F (65°C).•ULrecognizedforUnitedStatesandCanada.•FCCPart15compliantforcommercialandresidentialapplicationsat120V~.

•Pulsewidthmodulation(PWM)orconstantcurrentreduction(CCR)dimmingmethodsavailable.SeeApplicationNote#360fordetails.

•Formoreinformationpleasegoto: www.lutron.com/HilumeLED

Hi-lume® A-Series, case type K

3.00in(76mm)Wx1.00in(25mm)Hx 4.90in(124mm)L

Hi-lume® A-Series, case type M

1.18in(30mm)Wx1.00in(25mm)Hx14.25in(362mm)L

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 2 10.21.11

Specifications

Performance

•DimmingRange:100%to1%•OperatingVoltage:120V~at50/60Hz (ForwardPhaseControl)

•Aratedlifetimeof50,000hours@tc = 149 °F (65 °C). ContactLutronforderatinginformation.

•Patentedthermalfoldbackprotection•LEDsturnontoanydimmedlevelwithoutgoing

to full brightness.•Nonvolatilememoryrestoresalldriversettingsafter

power failure.•PowerFactor:>0.90at40W•TotalHarmonicDistortion(THD):<20%at40W•InrushCurrent:< 2A•InrushCurrentLimitingCircuitry:eliminatescircuitbreakertripping,switcharcingandrelayfailure.

•Opencircuitprotected•Shortcircuitprotected•Turn-ontime:≤1second•PWMDimmingFrequency:550Hz

Environmental

•SoundRating:ClassA.•RelativeHumidity:Maximum90%non-condensing.•Minimumoperatingambienttemperature(ta)= 32°F(0°C).

Standards

•MeetsANSIC62.41categoryAsurgeprotectionstandardsuptoandincluding4kV.

•FCCPart15compliantforcommercialandresidential applications.

•ManufacturingfacilitiesemployESDreductionpractices that comply with the requirements of ANSI/ESDS20.20.

•LutronRQualitySystemsregisteredtoISO9001.2008.

•UL8750recognized.•Class2outputavailable.•ModelsavailabletomeetLEDDriverrequirements

for Energy Star 1.1.

Driver Wiring & Mounting

•Driverisgroundedbyamountingscrewtothegrounded fixture (or by terminal connection on the Kcase).

•Terminalblocksonthedriveracceptonesolidwireperterminalfrom18to16AWG(0.75to1.5mm().

•Fixturemustbegroundedinaccordancewithlocaland national electrical codes.

•Maximumdriver–to–LEDlightenginewirelengthis10ft(3.0m).

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 3 10.21.11

How to Build a Model Number: Hi-lume® A-Series

LTEA4U1U _ _ - _ _ _ _ _

Case Style:

S = Studded (Kcaseonly)

N=Non-StuddedDriver Output:

C=Constantcurrentdriver withpulsewidthmodulation(PWM)dimming

A=Constantcurrentdriver withconstantcurrentreduction(CCR)dimming

V=Constantvoltagedriver withpulsewidthmodulation(PWM)dimming

Current Level (for Constant Current):020=0.20A;021=0.21A...210=2.10A

Voltage Level (for Constant Voltage):100=10.0V;105=10.5V...600=60.0V

Case Size:

K=Compact

M=Stick

example: LTEA4U1UKS-HC070For further assistance selecting your model number,contactourLEDCenterofExcellence at1-877-346-5338orLEDS@lutron.com

Class2ConstantVoltage

A=10.0V–12.0V

B=12.5V–20.0V

C=20.5V–24.0V

D=24.5V–38.0V

IsolatedNon-Class2 ConstantVoltage

X=38.5V–60.0V

Class2ConstantCurrent

E=0.20A–0.50A30V–54V

F=0.51A–1.00A30V–54V

G=0.20A–0.70A8V–20V

H=0.20A–0.70A15V–38V

I=0.71A–1.05A8V–20V

J=0.71A–1.05A15V–38V

K=1.06A–1.50A8V–20V

L=1.06A–1.50A15V–38V

M=1.51A–2.10A8V–20V

IsolatedNon-Class2 ConstantCurrent

Y=0.20A–0.50A30V–60V

Z=0.51A–1.00A30V–60V

LED Load Output Range (see the following pages for more detail):

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 19 10.21.11

“Z” Output Range, Current Driver Models

Output Voltage vs. Output Current

Out

put

Vo

ltag

e (V

)

Output Power vs. Output Current

Out

put

Po

wer

(W)

Output Current (A)

0

10

20

30

40

50

60

0 0.35 0.7 1.4 1.75 2.1

Output Current (A)

0

5

10

15

20

25

30

35

40

0 0.35 0.7 1.4 1.75 2.10.51 1.00 0.51 1.00

Output Power (W)

Effi

cien

cy (%

)

Driver Efficiency vs. Output Power at 120 V

60

65

70

75

80

85

90

15 20 25 30 35 40

40 W Max.

Z

30 V Min.

60 V Max.

Z

0.51 A 0.70 A 1.00 A

Current Driver Operation Range:

Typical Performance Specifications:

Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards Recognition

ConstantCurrentDriver(Isolated,Non-Class2)

PulseWidthModulation(PWM) ORConstantCurrentReduction(CCR)

30–60V 0.51–1.00A 16–40W

Output Voltage vs. Output Current

Out

put

Vo

ltag

e (V

)

Output Power vs. Output Current

Out

put

Po

wer

(W)

Output Current (A)

0

10

20

30

40

50

60

0 0.35 0.7 1.4 1.75 2.1

Output Current (A)

0

5

10

15

20

25

30

35

40

0 0.35 0.7 1.4 1.75 2.10.51 1.00 0.51 1.00

Output Power (W)

Effi

cien

cy (%

)

Driver Efficiency vs. Output Power at 120 V

60

65

70

75

80

85

90

15 20 25 30 35 40

40 W Max.

Z

30 V Min.

60 V Max.

Z

0.51 A 0.70 A 1.00 A

Parameter Value Test Conditions

InputCurrent 400mA ta =25°C, 1.00A,40Wload, Max.LightOutput, K enclosure 120Vwithoutadimmer

Power Factor 0.99

THD 8%

Driver Efficiency 83%

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 20 10.21.11

K Case: Case Dimensions

K Case: Connector Location Dimensions

B

FG

J* C

H*

A

E D

I*

M N

O P

R*

K*

Q

L

K*

Q

L

A 4.20in(107mm)B 1.00in(25mm)C 3.00in(76mm)D 4.90in(124mm)E 4.60in(117mm) (mountingcenter)

F 1.42in(36mm)G 1.99in(51mm)H* 1.11in(28mm)I* 2.00in(51mm)J* 1.60in(41mm)K* 0.33in(8.3mm)

L 0.65in(16.5mm)M 0.75in(19mm)N 1.73in(44mm)O 1.33in(34mm)P 0.74in(19mm)Q 0.32in(8mm)

R* 0.29in(7mm)

* Applies to studded K case only.

8-32 Threaded

Studs*

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 21 10.21.11

D

C

B A

M Case: Case Dimensions

A 14.125in(359mm)B 13.68in(347mm) (mountingcenter)C 1.18in(30mm)D 1.00in(25mm)

K Case: Side Entry Connector Location Dimensions (Non-Studded)

S

UV

TS 1.38in(35mm)T 0.64in(16mm)U 0.88in(22mm)V 1.53in(39mm)

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 22 10.21.11

Dimmed Hot (Orange)

Switched Hot (Black)

Neutral (White)

Ground1 (Green)

Dimmed Hot (Black)

Neutral (White)

Ground1 (Green)

Switched Hot (Black)

Neutral (White)

Ground1 (Green)

Ground2

+V3 (Red)

-V3 (Black)

+V3 (Red)

-V3 (Black)

+V2 (Red)

-V2 (Black)

LED light engine

Ground2

E1 (Purple)

E2 (Purple)

LED light engine

Ground1

ToForward Phase

DimmingControl

ToEcoSystem®

Digital Link

ToLine

Voltage

To3-wire

DimmingControl

LED light engine

Hi-lume®

A-Series

Hi-lume®

A-Series

Hi-lume®

A-Series

Wiring Diagram for Forward Phase Control

1 GroundwireconnectionavailableonKcasemodelsonly.Fixtureanddrivercasemustbegroundedinaccordancewithlocalandnational electrical codes.

2 Maximumdriver–to–LEDlightenginewirelengthis10ft(3.0m).

Note:Colorsshowncorrespondtoterminalblocksondriver.

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 23 10.21.11

Compatible Controls

•Guaranteedperformancespecificationswiththecontrolslistedinthechartbelow.•Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1-877-346-5338orLEDS@lutron.com

NOTE: ContactLutronTechnicalSupportforderatingruleswhenusingwallboxcontrolsontheHi-lume® A-Series LED Driver in multi-gang applications.

For the list of compatible controls, visit lutron.com/HiLumeLEDandselect“ForwardPhaseControlReportCard.”

* Phase adaptive dimmers must be configured to forward-phase mode.

Product Part Number Fixtures per Control (120 V only)

Measured Light Output Range

NovaT*® NTLV-600-CPN0199 1–8 100%–1%

Maestro Wireless® MRF2-6ND-120 1–8 100%–1%

RadioRA®21000W RRD-10ND 1–13 100%–1%

RadioRA® 2 Adaptive dimmer* RRD-6NA 1–8 100%–1%

RadioRA®600W RA-6ND 1–8 100%–1%

RadioRA®1000W RA-10ND 1–13 100%–1%

HomeWorks®QS600W HQRD-6ND 1–8 100%–1%

HomeWorks®QS1000W HQRD-10ND 1–13 100%–1%

HomeWorks® QS Adaptive dimmer* HQRD-6NA 1–8 100%–1%

HomeWorks® QS WPM HQRJ-WPM-6D-120 1–10 (peroutput)

100%–1%

HomeWorks®600Wdimmer HRD-6ND 1–8 100%–1%

HomeWorks®1000Wdimmer HWD-10ND,HRD-10ND 1–13 100%–1%

HomeWorks® WPM HWI-WPM-6D-120 1–10 (peroutput)

100%–1%

GRAFIKEye® QS QSGR-,QSGRJ- 1–10 (peroutput)

100%–1%

GRAFIKEye®3000 GRX-3100,GRX-3500 1–10 (peroutput)

100%–1%

RPM-4UModule (LCP,HomeWorks®, GRAFIKSystems™, Quantum®)

HW-RPM-4U-120, LP-RPM-4U-120

1–10 (peroutput)

100%–1%

RPM-4A Module* (LCP,HomeWorks®, GRAFIKSystems™, Quantum®)

HW-RPM-4A-120, LP-RPM-4A-120

1–13 (peroutput)

100%–1%

GPPanels Various 1–26 100%–1%

Stanza® SZ-6ND 1–8 100%–1%

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lumeR A-Series LTE Architectural Dimming

369-543 Rev. A 24 10.21.11

ELECTRICIANS AND CONTRACTORS

Driver Leads

Maximumdriver–to–LEDlightenginewirelengthis10ft(3.0m).

Wiring and Grounding

Driver and lighting fixture must be grounded. Drivers must be installed per national and local electrical codes.

LED Load Replacement

ForClass2rateddrivers,theLEDloadcanbechanged while the driver is installed and powered.

Maximum Driver Operating Temperature

Driver case temperature (tc)mustnotexceedULconditions of acceptability in end product.

For50,000hourlifetime,drivercasetemperature(tc)mustnotexceed149°F(65°C).

FACILITIES MANAGERS

SERVICE

Warranty

For warranty information, please visit http://www.lutron.com/TechnicalDocumentLibrary/Ballast%20and%20Driver%20Warranty.pdf

Replacement Parts

When ordering Lutron® replacement parts please providethefullmodelnumber.ConsultLutronifyouhave any questions.

Further Information

For further information, please visit us at www.lutron.com/hilumeLED or contact our LEDControlCenterofExcellenceat1.877.346.5338orLEDs@lutron.com