HM 150 Basic Hydraulics Bench

* Basic module for flow-related experiments1 * Closed water circuit1 * Complete, modular accessories program

Technical DescriptionThe HM 150 allows to carry out a large number of flow-related experiments. To ensure a safe stand of the experimental set-ups, the work space is provided with a stepped edge. The first part of the work space is in form of a flow channel. Therefore, experiments with weirs are possible. The collecting tank is used to measure the flow rate. Two different measuring ranges are realised with a stepped tank.1 The work space including the measuring tank and supply tank are made of reinforced fibreglass. Piping is made of PVC. The components are corrosion-free, shock-resistant difficult to deform.1 The supply tank includes a pump. The bench is independent from a water supply because of the closed water circuit.1

Learning Objectives / ExperimentsThe bench is used to supply water to the various experimental set-ups. The flow rates are set with a valve. Flow rates are measured indirectly: Reading of the filling level in the measuring tank while simultaneously measuring the time with a stop watch.

G.U.N.T Gerätebau GmbH, Fahrenberg 14, D-22885 Barsbüttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail sales@gunt.de, Web http://www.gunt.de We reserve the right to modify our products without any notifications.

Page 1/305/2008

HM 150 Basic Hydraulics Bench

1 switch box, 2 valve to adjust the flow rate, 3 supply pipe for accessories with a pump, 4 pump, 5 drain, 6 supply tank, 7 overflow pipe, 8 shut-off valve, 9 level indicator, 10 volumetric measuring tank

Specification[1] Basic module for flow-related experiments using auxiliary modules [2] Mobile construction with welded frame [3] Closed water circuit with tank and pump [4] Work space with integrated flow channel for experiments on weirs [5] Work space fitted with stepped edge, 20mm, to ensure safe mounting of experimental modules [6] Volumetric tank with 2 measuring ranges [7] Volumetric and supply tank made of GRP

Technical DataPump -power consumption: 550W - max. flow rate: 230L/min - max. head: 11m Supply tank: capacity: 180L Volumetric tank - for high flow rate: 40L - for low flow rate: 10L Flow channel lxwxh: approx. 530x150x180mm Stop watch: measuring range: 0...9h59min59sec Graduated beaker - 2L - graduation 50ml

Dimensions and Weightl x w x h : 1220 x 760 x 1200 mm Empty weight : approx. 125 kg

Connections230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase

Scope of Delivery1 bench, completely assembled 1 stopwatch 1 graduated beaker 1 instruction manual

Order Details

070.15000 HM 150 Basic Hydraulics Bench

G.U.N.T Gerätebau GmbH, Fahrenberg 14, D-22885 Barsbüttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail sales@gunt.de, Web http://www.gunt.de We reserve the right to modify our products without any notifications.

Page 2/305/2008

HM 150 Basic Hydraulics BenchAvailable Accessories: Product no. Order text 070.15001 HM 150.01 Pipe Friction Apparatus 070.15002 HM 150.02 Dead-Weight Piston Gauge 070.15003 HM 150.03 Flow Over Weirs Accessory 070.15004 HM 150.04 Variable Speed Centrifugal Pump 070.15005 HM 150.05 Hydrostatic Pressure Apparatus 070.15006 HM 150.06 Stability of a Floating Body 070.15007 HM 150.07 Bernoulli's Principle Demonstrator 070.15008 HM 150.08 Impact of Jet Apparatus 070.15009 HM 150.09 Orifice and Jet Velocity Apparatus 070.15010 HM 150.10 Flow Visualisation Apparatus 070.15011 HM 150.11 Fluid Friction Apparatus 070.15012 HM 150.12 Orifice Discharge Apparatus 070.15013 HM 150.13 Methods of Flow Measurement 070.15014 HM 150.14 Impeller Vortex Apparatus 070.15015 HM 150.15 Hydraulic Ram Pump 070.15016 HM 150.16 Twin Centrifugal Pump Configurations 070.15017 HM 150.17 Learning Software for Basic Fluid Mechanics 070.15018 HM 150.18 Osborne Reynolds Demonstrator 070.15019 HM 150.19 Demonstration Pelton Turbine 070.15020 HM 150.20 Demonstration Francis Turbine 070.15021 HM 150.21 Flow Channel 070.15029 HM 150.29 Losses in Bends and Fittings 070.15031 HM 150.31 Rotating Tank Vortex Apparatus 070.15032 HM 150.32 Pressure Distribution in a Venturi Nozzle 070.15033 HM 150.33 Constant Head Inlet Tank 070.15034 HM 150.34 Variable Head Outlet Tank 070.15035 HM 150.35 Horizontal Osborne Reynolds Demonstrator 070.15036 HM 150.36 Pitot-Static Tube Apparatus 070.15037 HM 150.37 Rotameter 070.15039 HM 150.39 Stability of a Floating Body - Additional Bodies 070.15040 HM 150.40 Vortex Flowmeter 070.15078 HM 150.78 Electrical Water Heater Module

G.U.N.T Gerätebau GmbH, Fahrenberg 14, D-22885 Barsbüttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail sales@gunt.de, Web http://www.gunt.de We reserve the right to modify our products without any notifications.

Page 3/305/2008