Home > AUM Implementation Guide AUM Implementation Guide Documents/AUM Release... · through work experience, work placement, work simulation or any combination of these. ... Fourth

2/06/2015 2:24 pm

Page 1 of 43http://www.asacompanionvolumes.com.au/print/book/export/html/175

Published on ASA Companion Volumes (http://www.asacompanionvolumes.com.au)

Home > AUM Implementation Guide

AUM Implementation Guide

http://www.asacompanionvolumes.com.au/

http://www.asacompanionvolumes.com.au/

2/06/2015 2:24 pm


Training Package OverviewCONTENTS

About Training PackagesTraining Package Endorsed ComponentsTraining Package, Qualification and Unit of Competency CodesTraining Package, Qualification and Unit of Competency TitlesNew Training Package InformationKey Features of AUM Training Package

ABOUT TRAINING PACKAGES

What is a Training Package

A Training Package is an integrated set of nationally endorsed competency standards, assessment requirements, credit arrangements and AustralianQualifications Framework (AQF) qualifications for a specific industry, industry sector or enterprise.

Each Training Package:

provides a consistent and reliable set of components for training, recognising and assessing peoples skills, and may also have optional supportmaterialsenables nationally recognised qualifications to be awarded through direct assessment of workplace competenciesencourages the development and delivery of flexible training which suits individual and industry requirementsencourages learning and assessment in a work-related environment which leads to verifiable workplace outcomes

How do Training Packages fit within the National Skills Framework? The National Skills Framework applies nationally, is endorsed by the StandingCouncil on Tertiary Education, Skills and Employment (SCOTESE), and comprises the Australian Quality Training Framework (AQTF), and TrainingPackages endorsed by the National Skills Standards Council (NSSC).

How are Training Packages developed? Training Packages are developed by Industry Skills Councils or enterprises to meet the identified training needsof specific industries or industry sectors. To gain national endorsement of Training Packages, developers must provide evidence of extensive research,consultation and support within the industry area or enterprise.

How do Training Packages encourage flexibility? Training Packages describe the skills and knowledge needed to perform effectively in the workplacewithout prescribing how people should be trained.

Training Packages acknowledge that people can achieve vocational competency in many ways by emphasising what the learner can do, not how orwhere they learned to do it. For example, some experienced workers might be able to demonstrate competency against the units of competency, andeven gain a qualification, without completing a formal training program.

With Training Packages, assessment and training may be conducted at the workplace, off-the-job, at a training organisation, during regular work, orthrough work experience, work placement, work simulation or any combination of these.

Who can deliver and assess using Training Packages? Training and assessment using Training Packages must be conducted by a Registered TrainingOrganisation (RTO) that has the qualifications or specific units of competency on its scope of registration, or that works in partnership with another RTO,as specified in the AQTF.

Training Package Components Training Packages are made up of mandatory components endorsed by the NSSC, and one or more quality assuredcompanion volume.

TRAINING PACKAGE ENDORSED COMPONENTS

The nationally endorsed components include the units of competency, assessment requirements (associated with each unit of competency),qualifications and credit arrangements. These form the basis of training and assessment in the Training Package and, as such, they must be used.

Units of Competency

Each unit of competency identifies a discrete workplace requirement and includes the foundation skills that underpin competency as well as work healthand safety requirements. The units of competency must be adhered to in training and assessment to ensure consistency of outcomes.

Assessment Requirements

The Assessment Requirements provide the performance evidence, knowledge evidence and assessment conditions associated with each unit ofcompetency that ensure that the training and assessment of a unit of competency meets industry needs and nationally agreed standards as expressed inthe Training Package and the AQTF.

Qualifications

Each Training Package provides details of those units of competency that must be achieved to award AQF qualifications. The rules around which units ofcompetency can be combined to make up a valid AQF qualification in the Training Package are referred to as the ‘packaging rules’. The packaging rulesmust be followed to ensure the integrity of nationally recognised qualifications issued.

Credit Arrangements

Each Training Package provides details of any known Credit Arrangements existing between Training Package qualifications and Higher Educationqualifications for those qualifications contained within the training package.

Training Package Companion Volumes

http://www.asacompanionvolumes.com.au/print/book/export/html/175#About

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Components

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Codes

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Titles

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Information

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Package

2/06/2015 2:24 pm


The endorsed components of Training Packages are complemented and supported by a quality assured Companion Volume Implementation Guideproduced by the Training Package developer which is available at the time of endorsement. Training Package developers may produce other qualityassured companion volumes to meet the needs of their stakeholders as required.

TRAINING PACKAGE, QUALIFICATION AND UNIT OF COMPETENCY CODES

There are agreed conventions for the national codes used for Training Packages and their components. Always use the correct codes, exactly as theyappear in the Training Package, and with the code always before the title.

Training Package Codes

Each Training Package has a unique three-character national code assigned when the Training Package is endorsed, for example AUM. The threecharacters are letters identifying the Training Package industry coverage, i.e. AUM = Automotive Manufacturing Industry.

Qualification Codes

Within each Training Package, each qualification has a unique eight-character code, for example AUM10113. Qualification codes are developed asfollows:

the first three letters identify the Training Package; the first number identifies the qualification level (noting that, in the qualification titles themselves, Arabic numbers are not used); the next two numbers identify the position in the sequence of the qualification at that level; andthe last two numbers identify the year in which the qualification was endorsed. (Where qualifications are added after the initial Training Packageendorsement, the last two numbers may differ from other Training Package qualifications as they identify the year in which those particularqualifications were endorsed).

Unit of Competency Codes

Within each Training Package, each unit of competency has a unique code. Unit of competency codes are assigned when the Training Package isendorsed, or when new units of competency are added to an existing endorsed Training Package. Unit codes are developed as follows:

a code is made up of no more than 12 characters, normally a mixture of uppercase letters and numbers with the first three alpha charactersdenoting the training package identifier, as in AUMATK001 Select and use tools and equipment in an automotive manufacturing environmentthe first three characters signify the Training Package – AUM Automotive Manufacturing Training Package,the fourth character indicates the industry sector (i.e. A is common),the fifth and sixth character indicates the function or skill area (i.e. TK is technical tools and equipment). – in the above example, andthe last three characters, identify the position in the sequence of units for this industry sector, function or skill area. Where changes are made that alter the outcome of a unit, a new code is assigned and the title is changed.

UNIT OF COMPETENCY CODE DESCRIPTOR

The table below describes the break down of codes used for the units of competency in the Automotive Manufacture (AUM) Training Package.

Industry Sector - Fourth Letter Function or Skill Area

- Fifth Letter - Sixth Letter

Common AUMA Administration A Not Assigned A

Bicycle AUMB Support and Logistics B Brakes B

Electrical AUME Sales and Marketing C Cooling Systems C

Passenger AUMF Officiating D Steering and Suspension D

Bus, Truck and Trailer AUMG Environment E Engines E

Mechanical - Heavy Vehicle AUMH Foundation Skills F Fuel Systems F

Mechanical - Motocycle AUMJ Not assigned G Glazing G

Mechanical - Mobile Plant AUMK Information Technology K Hybrid Vehicle and Battery ElectricalVehicle H

Mechanical - Light Vehcile AUML Regulatory or Legal L Wheels and Tyres J

Motorsport AUMM Management, Leadership andSupervision M Tools and Equipment K

2/06/2015 2:24 pm


Mechanical - Lifting Equipment AUMN Loss Assessment or Repair Quoting N Alternative Fuels L

Outdoor Power Equipment AUMP Quality Q Manufacturing M

Marine AUMR Health and Safety S Body N

Sales and Parts, Administration andManagement AUMS Technical T Paint P

Mechanical Miscellaneous AUMT Driveline and Final Drives Q

Vehicle Body AUMV Electrical and Electronic R

Fabrication S

Trimming and Upholstery T

Air Conditioning and HVAC U

Accessories V

Welding, Grinding, Maching andSoldering W

Transmission X

Chassis and Frame Y

Emssion and Exhaust Z

TRAINING PACKAGE, QUALIFICATION AND UNIT OF COMPETENCY TITLES

There are agreed conventions for titling Training Packages and their components. Always use the correct titles, exactly as they appear in the TrainingPackage, and with the code always placed before the title. Training Package Titles

The title of each endorsed Training Package is unique and relates the Training Packages broad industry coverage.

Qualification Titles The title of each endorsed Training Package qualification is unique. Qualification titles use the following sequence:

first, the qualification is identified as either Certificate I, Certificate II, Certificate III, Certificate IV, Diploma, Advanced Diploma, Vocational GraduateCertificate, Vocational Graduate Diploma, or Associate Degree;this is followed by the words ‘in’ for Certificates I to IV, and ‘of’ for Diploma, Advanced Diploma, Vocational Graduate Certificate, VocationalGraduate Diploma and Associate Degree;then, the industry descriptor, for example Automotive Manufacturing; and then, if applicable, the occupational or functional stream in brackets, for example (Computer Systems).For example: AUM40113 Certificate IV in Automotive Manufacturing

Unit of Competency Titles Each unit of competency title is unique. Unit of competency titles describe the competency outcome concisely, and are writtenin sentence case.

For example: AUMFTA005 Analyse a test vehicle for research purposes

Introduction to the AUM Automotive Manufacturing Training Package

The revised AUM Automotive Manufacturing Training Package Version One has been developed to replace the AUM12 Automotive ManufacturingTraining Package Version One. This training package includes a complete review and restructure of the training package to comply with the new NSSCStandards for Training Packages, this has included recoding all units of competency and qualifications in the training package. The review of thequalifications and units of competency in this training package also presented an ideal opportunity to rationalise competencies and apply a structuredmethodology to the coding of units of competency that aligns with current training package policy.

This Training Package is designed to meet the training and skills recognition needs of the Australian automotive manufacturing industry sector, includingoccupational areas covering:

Passenger motor vehiclesBus, truck and trailers

This training package also provides access to the apprenticeship streams provided within current National Industry Competency Standards leading tonational qualifications, with traineeship pathways also available. It also enables further career advancement beyond trade apprenticeship and technicaltraineeship, with progression to Diploma.

2/06/2015 2:24 pm


Introduction to the IndustryThe automotive industry is one of Australia’s key manufacturing sectors and an important source of employment and researchand development. Australia is only one of thirteen countries with the capability to design, engineer and produce vehicles from beginning to end. TheAustralian vehicle market is also one of the most open and competitive in the world.

Australia’s automotive industry is comprised of two very distinct sectors – the automotive manufacturing sector and the automotive retail, services andrepair sector.

The manufacturing sector includes three motor vehicle manufacturers (Holden, Ford and Toyota) and three large truck manufacturers (IVECO, Kenworthand Volvo Commercial Vehicles) and more than 180 specialist component manufacturers. This sector of the industry is also a significant exporter ofvehicles and components.

The Motor Vehicle and Motor Vehicle Parts Manufacturing sector consists of firms primarily engaged in the manufacture of motor vehicles (including bus,trucks vans), engines, vehicle bodies, trailers, electrical components and parts.

Total people employed in the automotive industry is estimated at 371,255 people in 2011-12, with 49,500 of these people being employed in motorvehicle and parts manufacture.

AUM Version 1 - Review ProcessThroughout the development and improvement of this training package there has been extensive consultation with boththe vehicle manufacturing bus, truck and trailer industry sector advisory committee and the vehicle manufacturing passenger motor vehicle industrysector advisory committee which comprise of industry stakeholder representatives. Click on the link below for details of the current members of thesecommittees.

http://www.autoskillsaustralia.com.au/industry-sector-advisory-committees/

Throughout the process, consultation has occurred through these committees, meeting minutes and letters of support

NEW TRAINING PACKAGE INFORMATION

The AUM Automotive Manufacturing Training Package has been developed to replace the AUM12 Automotive Manufacturing Training Package. ThisTraining Package is designed to meet the training and skills recognition needs of the Australian automotive manufacturing industry sector. It covers thecompetencies used by people employed in the automotive manufacturing industry sector in two areas: Passenger Motor Vehicle and Bus, Truck andTrailer.

It also provides access to the apprenticeship streams provided within current National Industry Competency Standards leading to national qualifications,with traineeship pathways also available. It also enables further career advancement beyond trade apprenticeship and technical traineeship, withprogression to Diploma. Qualifications were reviewed and revised to reflect contemporary automotive manufacturing job roles, provide career pathways,as well as simplification of some of the qualification titles.

The bank of units of competency has been revised and rationalised. Part of the revision included bringing all units to the current approved format. Furtherinformation has been added to each unit to assist users.

KEY FEATURES OF AUM TRAINING PACKAGE

AUM covers the Passenger Motor Vehicle and Bus, Truck and Trailer Sectors. The following is a brief overview of the training package. The AUMTraining Package represents the skill needs of the automotive manufacturing sector in Australia. As such, the qualification design represents the majorsectors in the industry. The focus is on clarity of occupational outcomes with flexibility to allow for future variation in roles. The principles of thequalifications that were considered include: flexibility and options relevant to the industry will be a key feature of all qualifications to allow for ongoingchange – restrictive ‘rules’ will be kept to a minimum whilst maintaining rigour of occupational outcomes specialisations and requirements to achieve thespecialisations, will be nominated within relevant qualifications nominated specialisations will be based on industry sector criteria, in particular, industrydevelopment objectives and skills shortages.

Rationalisation and the reduction of unnecessary duplication is a national priority, though there is currently no agreed national definition of rationalisation.Where units have been merged or amalgamated this has been done to achieve: reduced duplication within and between training products a cohesiveand flexible set of national training products to meet the skill development needs of industry, the community and individuals.

http://www.autoskillsaustralia.com.au/industry-sector-advisory-committees/

2/06/2015 2:24 pm


AQF Qualifications FrameworkCONTENTS

What is the Australian Qualifications Framework?QualificationsQualifications and Packaging RulesQualification PathwaysSkill Sets

WHAT IS THE AUSTRALIAN QUALIFICATIONS FRAMEWORK?

The Australian Qualifications Framework (AQF) provides a comprehensive, nationally consistent framework for all qualifications in post-compulsoryeducation and training in Australia. In the vocational education and training (VET) sector it assists national consistency for all trainees, learners,employers and providers by enabling national recognition of qualifications and Statements of Attainment.

A brief overview of the AQF follows. For a full explanation of the AQF, see the AQF Implementation Handbook. http://www.aqf.edu.au/Portals/0/Documents/2013%20docs/AQF%202nd%20Edition%20January%202013.pdf

Training Package qualifications in the VET sector must comply with the titles and guidelines of the AQF. Endorsed Training Packages provide a uniquetitle for each AQF qualification which must always be reproduced accurately.

QUALIFICATIONS

Training Packages can incorporate the following eight AQF qualifications.

Certificate I in ...Certificate II in ...Certificate III in ...Certificate IV in ...Diploma of ...Advanced Diploma of ...Vocational Graduate Certificate of ...Vocational Graduate Diploma of ...Associate Degree of ...

On completion of the requirements defined in the Training Package, a Registered Training Organisation (RTO) may issue a nationally recognised AQFqualification. Issuance of AQF qualifications must comply with the advice provided in the AQF Implementation Handbook and the AQTF EssentialStandards for Initial and Continuing Registration.

Statement of Attainment A Statement of Attainment is issued by a Registered Training Organisation when an individual has completed one or more units of competency fromnationally recognised qualification(s)/courses(s). Issuance of Statements of Attainment must comply with the advice provided in the current AQFImplementation Handbook and the AQTF Essential Standards for Initial and Continuing Registration.

Under the AQTF, RTOs must recognise the achievement of competencies as recorded on a qualification or Statement of Attainment issued by otherRTOs. Given this, recognised competencies can progressively build towards a full AQF qualification.

AQF Guidelines and Learning Outcomes The AQF Implementation Handbook provides a comprehensive guideline for each AQF qualification. A summary of the learning outcome characteristicsand their distinguishing features for each VET related AQF qualification is provided below.

For a detailed description of the various AQF qualification levels to go http://www.aqf.edu.au

QUALIFICATIONS AND PACKAGING RULES

AUM QualificationsQualification requirements from Certificate I to Diploma have been altered, in some cases significantly, however, more importantly, they allow for flexibilitywhile the creation of descriptors within qualifications provide specialisation as appropriate.

While some variation occurs in numbers of units of competency across qualifications, occupational outcomes align with the descriptions provided by theAQF at various levels.

VET in SchoolsThe delivery and assessment of competence under this package is seen as appropriately designed for VET in Schools and these programs are to beencouraged.

However, due to the requirement to demonstrate competence, it may be difficult for a school to assess and award qualifications within AUM, except inclose partnerships with other RTOs or organisations within the industry.

Transition ArrangementsQualifications achieved from AUM12 will be recognised.

People who have attained units of competency from AUM12, should be granted equivalent units of competency in AUM, hence, credit towards a full AUMqualification. A comprehensive mapping from AUM12 to AUM is included.

AUM Assessment CriteriaAUM has adopted the mandatory Assessment Guidelines, which provide the endorsed framework for assessment of units of competency in this Training

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Framework

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Qualifications

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Rules

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Pathways

http://www.asacompanionvolumes.com.au/print/book/export/html/175#SkillSets

http://www.aqf.edu.au/Portals/0/Documents/2013%20docs/AQF%202nd%20Edition%20January%202013.pdf

http://www.aqf.edu.au/

2/06/2015 2:24 pm


Package. They are designed to ensure that assessment is consistent with the AQTF. Assessments against units of competency in this Training Packagemust be carried out in accordance with these Assessment Guidelines.

Additional assessment advice is provided below with regard to simulated workplace environments. Some emphasis has been given to the establishmentof partnerships in delivery and assessment to ensure satisfactory demonstration of workplace competence. This section provides an overview of therequirements for assessment when using the AUM Training Package, including a summary of the AQTF requirements, licensing/registrationrequirements, and assessment pathways.

Assessment in the Automotive Manufacturing IndustryThe automotive manufacturing industry considers skills and knowledge demonstrated in a real workplace environment to be of great importance. Whileassessment of the units of competency in the AUM Training Package can be carried out in a simulated work environment, the industry stronglyrecommends that assessment of skills acquired is conducted under partnership arrangement in the workplace.

Assessment of competence requires the collection of evidence which should be conducted over a period of time. This assessment approach may includedemonstration at the workplace and/or a simulated work environment to ensure that demonstration of competence is valid and reliable. The individualbeing assessed needs to be aware that the collection of evidence is ongoing and part of planning, conducting and reviewing the assessment process.

Simulated Work EnvironmentThe AUM Training Package defines Simulated Work Environment as a model of convenience that is established to resemble the real thing which is fortraining purposes only.

Should it be necessary to conduct competency-based training and/or assessment in a simulated work environment and/or worksite, both the environmentand/or worksite must resemble the real circumstances according to the task required to be assessed. These tasks should not be interpreted as beingprojects that are related to the off-the-job training outcomes rather than skills acquired within any given competency standard.

Units of competency from the AUM Training Package should wherever possible be assessed in a work environment. Where this is not possibleassessment may occur in a simulated environment.

A simulated work environment may be required for the following reasons:

the candidate may not have access to a workplace (e.g. Certificate I qualification, which is targeted at VET in Schools)the workplace may not use the relevant skill, equipment or processconducting assessments may be disruptive or interfere with work requirements, for example, there may be ethical, privacy or confidentiality issuesto considerit may not be appropriate to apply the skills in the workplace due to potential risks, such as work health and safety (WHS) or equipment beingdamaged.

In order to be valid and reliable, the simulation must closely resemble what occurs in a real work environment. The simulated work environment shouldinvolve a range of activities that reflect real work experience.

It is critical that when a simulated work environment is being set up that the assessor is thoroughly familiar with the units of competency as well asexperienced in the current circumstances of the work.

In deciding whether a simulation or an assessment environment has been adequately set up, the following questions should be considered. Are thereopportunities to:

test the full range of equipment?use up to date equipment and software?reflect times and deadlines?show the complexity of dealing with multiple tasks?involve prioritising among competing tasks?deal with customers, including difficult ones?work with others in a team?communicate with diverse groups?find, discuss and test solutions to problems?explore health and safety issues?answer practically oriented, applied knowledge questions?show the level of written and verbal expression sufficient for the work requirements?

QUALIFICATION PATHWAYS

The following pathways charts are provided to show the types of pathways into and from qualifications that are possible with this Training Package. Formore information about qualifications and pathways contact Auto Skills Australia - [email protected]

mailto:[email protected]

2/06/2015 2:25 pm


SKILL SETS

DefinitionSkill sets are defined as single units of competency, or combinations of units of competency from an endorsed Training Package, which link to a licenceor regulatory requirement, or defined industry need.

Wording on Statements of AttainmentSkill sets are a way of publicly identifying logical groupings of units of competency which meet an identified need or industry outcome. Skill sets are notqualifications.

Where skill sets are identified in a Training Package, the Statement of Attainment can set out the competencies a person has achieved in a way that isconsistent and clear for employers and others. This is done by including the wording ‘these competencies meet [insert skill set title or identified industryarea] need’ on the Statement of Attainment. This wording applies only to skill sets that are formally identified as such in the endorsed Training Package.See the AQF Implementation Handbook for advice on wording on Statements of Attainment.http://www.aqf.edu.au/Portals/0/Documents/2013%20docs/AQF%202nd%20Edition%20January%202013.pdf

Skill Sets in this Training Package

This section provides information on Skill Sets within this Training Package, with the following important disclaimer: Readers should ensure that theyhave also read the part of the Training Package Companion Volume Implementation Guide that outlines licensing and regulatory requirements.

Where this section is blank, nationally recognised Skill Sets have yet to be identified in this industry.

There are no Skill Sets in this Training Package.

http://www.aqf.edu.au/Portals/0/Documents/2013%20docs/AQF%202nd%20Edition%20January%202013.pdf

2/06/2015 2:25 pm


Competency StandardsCONTENTS

What is competency?Contextualisation of units of competency by RTOsComponents of units of competency

WHAT IS COMPETENCY?

The broad concept of industry competency concerns the ability to perform particular tasks and duties to the standard of performance expected in theworkplace. Competency requires the application of specified skills, knowledge and attitudes relevant to effective participation in an industry, industrysector or enterprise.

Competency covers all aspects of workplace performance and involves performing individual tasks; managing a range of different tasks; responding tocontingencies or breakdowns; and, dealing with the responsibilities of the workplace, including working with others. Workplace competency requires theability to apply relevant skills, knowledge and attitudes consistently over time and in the required workplace situations and environments. In line with thisconcept of competency, Training Packages focus on what is expected of a competent individual in the workplace as an outcome of learning, rather thanfocusing on the learning process itself.

Competency standards in Training Packages are determined by industry to meet identified industry skill needs. Competency standards are made up of anumber of units of competency, each of which describes a key function or role in a particular job function or occupation. Each unit of competency in aTraining Package is linked to one or more AQF qualifications.

CONTEXTUALISATION OF UNITS OF COMPETENCY BY RTOs

Registered Training Organisations (RTOs) may contextualise units of competency in this endorsed Training Package to reflect required local outcomes.Contextualisation could involve additions or amendments to the unit of competency to suit particular delivery methods, learner profiles, specific enterpriseequipment requirements, or to otherwise meet local needs. However, the integrity of the overall intended outcome of the unit of competency must bemaintained.

Any contextualisation of units of competency in this Training Package must be within the bounds of the following advice:

RTOs must not remove or add to the number and content of elements and performance criteria. RTOs can include specific industry terminology in the range of conditions.Any amendments and additions to the range of conditions made by RTOs must not diminish the breadth of application of the competency, or reduceits portability.RTOs may add detail to the unit's assessment requirements in areas such as the evidence requirements or required resources and infrastructure—but only where these expand the breadth of the competency and do not limit its use.

COMPONENTS OF UNITS OF COMPETENCY

The components of units of competency are summarised below, in the order in which they appear in each unit of competency.

Unit CodeThe unit code contains the three alpha characters identifying the Training Package, followed by alpha and/or numeric characters. It must comply with thelength specified in the AVETMIS Standard (no more than 12 characters).

Unit TitleThe unit title concisely describes the unit outcome. It must comply with the length specified in the AVETMIS Standard (no more than 100 characters).

ApplicationThe application briefly describes how the unit is practically applied in the industry and in what context(s) the unit may be applied. It includes:

a summary statement of unit content;focused, useful information on how and where the unit of competency could be practically applied and who might use it; andthe unit of competency's relationship to any licensing, legislative, regulatory or certification requirements.

Prerequisite Unit (optional)Any unit(s) in which the candidate must be deemed competent prior to the determination of competency in the unit.

Competency Field (Optional)Used to categorise a set of units within a Training Package in relation to a type of work.

Unit Sector (optional)Used to categorise a set of units within a Training Package in relation to an industry sector.

Elements of CompetencyElements describe the essential outcomes of the unit the competency.

Performance CriteriaPerformance criteria describe the performance needed to demonstrate achievement of the element.

Foundation SkillsDescribes those language, literacy, numeracy and employment skills that are essential to performance. Where all foundation skills essential toperformance in the unit are explicit in the performance criteria the following statement may be inserted in this field; Foundation skills essential toperformance are explicit in the performance criteria of this unit of competency.

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Competency

http://www.asacompanionvolumes.com.au/print/book/export/html/175#RTOs

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Competency

2/06/2015 2:25 pm


Range of Conditions

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on thework situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Unit Mapping InformationSpecifies code and title of any equivalent unit of competency. Where there is no equivalent this will be indicated by the words No equivalent unit.

LinksAUM Automotive Manufacturing Training Package Implementation Guide

http://www.asacompanionvolumes.com.au/aum-implementation-guide

http://www.asacompanionvolumes.com.au/aum-implementation-guide

2/06/2015 2:25 pm


Foundation skillsFoundation skills include language, literacy and numeracy (LLN) skills, and skills used in the workplace which are summarised in the automotive units ofcompetency as communication, planning and organising, problem solving, teamwork and digital literacy. Foundation skills may range from very basicskills to specialised and highly developed skills.

To view or download a copy of the brochure 'Foundation Skills for Automotive Explained' click on the link below.

Foundation Skills for Automotive Explained

For a more detailed explanation of Foundation Skills including Automotive Manufacturing examples click on the link below.

http://www.asacompanionvolumes.com.au/node/106

http://www.asacompanionvolumes.com.au/sites/default/files/Foundation-Skills-Explained.pdf


2/06/2015 2:25 pm


Qualification Code and Title Relationship to Previous Training PackageAUM V1 E/N Comment in Relation to Training

Package AUM12 Version 1.0

AUM10113 Certificate I in AutomotiveManufacturing

AUM10112 Certificate I in AutomotiveManufacturing E Qualification updated to reflect new

Training Package standards

AUM20113 Certificate II in AutomotiveManufacturing Production – Passenger MotorVehicle


E Qualification updated to reflect newTraining Package standards

AUM20213 Certificate II in AutomotiveManufacturing Production – Bus, Truck andTrailer


N

Qualification updated to reflect newTraining Package standardsCore units reduced from 7 to 5 bymoving AUMGTW001 and AUMGTW002from core to elective

AUM30113 Certificate III in AutomotiveManufacturing Technical Operations – PassengerMotor Vehicle



AUM30213 Certificate III in AutomotiveManufacturing Technical Operations – Bus, Truckand Trailer



AUM40113 Certificate IV in AutomotiveManufacturing

AUM40112 Certificate IV in AutomotiveManufacturing E Qualification updated to reflect new


Modification HistoryCONTENTS

Preliminary InformationModification History SummaryMapping of QualificationsMapping of Units of Competency

PRELIMINARY INFORMATION

Important Note to UsersTraining Packages are not static documents; they are amended periodically to reflect the latest industry practices and are version controlled. It isessential that the latest version is always used.

Check the version number before commencing training or assessmentThis Training Package is Version 1.0 – check whether this is the latest version by going to the Training.gov.au (TGA) http://training.gov.au/ and locatinginformation about the Training Package. Alternatively, contact Auto Skills Australia (http://www.autoskillsaustralia.com.au) to confirm the latest versionnumber.

Explanation of version number conventions The primary release of this Training Package is Version 1.0. When changes are made to a Training Package, sometimes the version number is changedand sometimes it is not, depending on the extent of the change. When a Training Package is reviewed it is considered to be a new Training Package forthe purposes of version control, and is Version 1.0. Do not confuse the version number with the Training Package’s national code (which remains thesame during its period of endorsement).

Explanation of the review dateThe review date (shown on the title page and in the footer of each page) indicates when the Training Package is expected to be reviewed in the light ofchanges such as changing technologies and circumstances. The review date is not an expiry date. Endorsed Training Packages and their componentsremain current until they are reviewed or replaced.

MODIFICATION HISTORY SUMMARY

Version Release Date CommentsVersion1.0 December 2013 Primary Release

MAPPING OF QUALIFICATIONS

Summary Mapping of AUM Automotive Manufacturing Training Package (Version 1) to AUM12 Automotive Manufacturing Training Package (Version 1)

E= equivalent N= not equivalent

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Info

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Summary

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Quals

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Comp

http://training.gov.au/

http://www.autoskillsaustralia.com.au/

2/06/2015 2:25 pm


AUM50113 Diploma of AutomotiveManufacturing

AUM50112 Diploma of Automotive Manufacturing E Qualification updated to reflect newTraining Package standards

MAPPING OF UNITS OF COMPETENCY


All AUM units of competency have been updated to reflect the new Standards for Training Packages (SCOTESE,2012). This has included revisingelements and performance criteria, and adding the following sections: application, foundation skills, range of conditions, performance evidence,knowledge evidence, assessment conditions, unit mapping information and links.


AUM Unit code and unit title AUM12 v1 unit code and Unit title Comment in relation to AUM12 v1 E/N

AUMABA3001 Perform forklift driving and liftingoperations Unit removed

AUMAKM4001 Monitor and test computerisedequipment Unit removed

AUMFQM3003 Apply visual factory principles andpractices to an automotive manufacturingenvironment

Unit removed and replaced with importedunit MSS402040A Apply 5S procedures

AUMFTQ3001 Install engine and drive train Unit removed

AUMGMM3001 Contribute to workplace relationshipsand processes Unit removed

AUMABA002 Operate load shifting equipment AUMABA3002 Operate load shifting equipment Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMABM001 Control stock AUMABM4001 Control stockUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMAFA001 Apply for jobs and undertakejob interviews AUMAFA1001 Manage personal career goals

Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMAFA002 Maintain workplacerelationships

AUMAFA2002 Maintain effective workplacerelationships


N

AUMAKM002 Produce computer-aideddrawings AUMAKM5002 Produce computer-aided drawings


N

AUMAMA001 Contribute to production goals AUMAMA2001 Manage personal workplaceUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMAMA002 Work effectively in teams AUMAMA2002 Work effectively with others in teams Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMAMA003 Prepare new product designs AUMAMA4003 Prepare new product designsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMAMA004 Coordinate automotive projectactivities AUMAMA5004 Coordinate project activities


N

AUMAMM001 Influence and lead workgroups in an automotive manufacturingworkplace

AUMAMM3001 Influence and lead work groups in anautomotive manufacturing environment


N

AUMANA001 Prepare and documentquotations AUMANA3001 Prepare and document quotation


N

AUMAQA001 Apply quality assurancetechniques AUMAQA4001 Apply quality assurance techniques


N

AUMASA001 Apply safe work practices in theautomotive manufacturing environment

AUMASA2001 Monitor and maintain a safe workplaceand environment


N

AUMASM001 Monitor and maintain a safeautomotive work environment

AUMASM3001 Maintain a safe automotivemanufacturing work environment

Unit code changeUnit updated to reflect Standards forTraining Package N

2/06/2015 2:25 pm


AUMATA001 Develop documentation andprocedures

AUMATA2001 Develop and produce documentationand procedures


N

AUMATA002 Conduct post-productioninspections and tests

AUMATA3002 Conduct final inspections andfunctional tests


N

AUMATA003 Repair faults in vehicle metalcomponents

AUMATA3003 Rectify faults in vehicle metalcomponents


N

AUMATA004 Diagnose and repairmechanical faults

AUMATA3004 Rectify mechanical faults onassembled vehicles


N

AUMATA005 Rectify assembly faults AUMATA3005 Rectify assembly faults in assembledvehicles


N

AUMATA006 Provide automotivemanufacturing advice AUMATA4006 Provide technical advice


N

AUMATA007 Conduct vehicle performancetests

AUMATA4007 Conduct simulated or roadperformance test


N

AUMATA008 Produce drawings manually AUMATA5008 Produce drawings manuallyUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMATE001 Rework faulty productionengines AUMATE3001 Rework production engines


N

AUMATK001 Use and maintain tools andequipment

AUMATK1001 Select and use tools and equipment inan automotive manufacturing environment


N

AUMATK002 Prepare and operate tools,equipment and machinery

AUMATK2002 Prepare, use and operate equipment,tools and machinery


N

AUMATK003 Monitor and maintainautomotive equipment

AUMATK3003 Monitor and maintain equipment, toolsand machinery


N

AUMATK004 Use and maintain measuringequipment AUMATK4004 Use measuring equipment


N

AUMATK005 Calibrate measuring equipment AUMATK4005 Calibrate measuring equipment inautomotive development


N

AUMATK006 Test plant, tools, equipment,product and systems

AUMATK4006 Test plant, tooling, equipment, productand systems


N

AUMATK007 Install vehicle plant, equipmentand systems AUMATK4007 Install plant, equipment or systems


N

AUMATK008 Maintain vehicle plant, tools,equipment and systems

AUMATK4008 Maintain plant, tooling, equipment orsystems


N

AUMATK009 Repair vehicle plant, tools,equipment and systems

AUMATK4009 Repair plant, tooling, equipment orsystems


N

AUMATK010 Manufacture and modify vehicleplant, tools, equipment and systems

AUMATK4010 Manufacture or modify plant, tooling,equipment or systems


N

AUMATK011 Use technical data relating toplant, tools, equipment and systems

AUMATK4011 Interpret manuals, drawings andcircuits for plant, tooling, equipment or systems


N

AUMATN001 Repair structural faults invehicles

AUMATN3001 Conduct structural rectification ofvehicle bodies


N

AUMATP001 Rectify minor faults in vehiclepaintwork AUMATP3001 Rectify paintwork


N

Unit code change

2/06/2015 2:25 pm


AUMATP002 Control vehicle paint lineproduction

AUMATP3002 Control paint line productionprocesses

Unit updated to reflect Standards forTraining Package

N

AUMATR001 Repair electrical faults inassembled vehicles

AUMATR3001 Rectify electrical faults on assembledvehicles


N

AUMATR002 Install and maintain motorvehicle instrumentation sensors andtransmitters

AUMATR4002 Use sensors to acquire motor vehicledata for development purposes


N

AUMATS001 Stamp and press vehicle parts AUMATS2001 Stamp and press partsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMATW001 Test vehicle weldsultrasonically AUMATW3001 Test welds ultrasonically


N

AUMATW002 Inspect welding AUMATW4002 Conduct welding inspectionUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFBK001 Receive and dispatch vehiclecomponents

AUMFBK2001 Receive and dispatch materials,equipment and tools


N

AUMFBM001 Prepare and processautomotive materials and components

AUMFBM2001 Prepare and process materials andcomponents


N

AUMFMM001 Reduce cycle time inautomotive manufacturing work processes AUMFMM3001 Reduce cycle time in work processes


N

AUMFMM002 Reduce waste in automotivemanufacturing work processes AUMFMM3002 Reduce waste in work processes


N

AUMFMM003 Plan and organise automotiveproduction and assembly processes AUMFMM3003 Plan and organise production


N

AUMFQM001 Apply continuous improvementin automotive manufacturing

AUMFQM2001 Monitor and maintain continuousimprovement of systems and processes


N

AUMFQM002 Sustain quality standards in anautomotive manufacturing workplace AUMFQM3002 Sustain quality standards


N

AUMFTA001 Document manufacturingdesign processes AUMFTA3001 Document designs


N

AUMFTA002 Perform die coating AUMFTA3002 Conduct die coatingUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFTA003 Set and adjust automotiveproduction machine tools AUMFTA3003 Conduct tool setting


N

AUMFTA004 Monitor and maintain operationof metal treatment plants

AUMFTA3004 Monitor and maintain metals treatmentplant operations


N

AUMFTA005 Analyse test vehicles forresearch purposes

AUMFTA4005 Analyse a test vehicle for researchpurposes


N

AUMFTA006 Develop research reports onvehicle design, development and production AUMFTA5006 Produce research reports


N

AUMFTA007 Evaluate vehicle design,development and production information

AUMFTA5007 Seek, evaluate, organise and prepareinformation


N

AUMFTE001 Conduct engine hot tests AUMFTE3001 Conduct engine hot testUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFTK001 Test automotive productioncomponents, equipment, and systems

AUMFTK5001 Establish a test or trial for componentsof plant, tooling, equipment or systems


N

AUMFTM001 Undertake preliminary fault AUMFTM3001 Undertake preliminary fault findingUnit code changeUnit updated to reflect Standards for N

2/06/2015 2:25 pm


finding and machine reset and machine reset Training Package

AUMFTM002 Create new product designs AUMFTM5002 Create new product designsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFTM003 Develop conceptual modelsand prototypes

AUMFTM5003 Develop conceptual models andprototypes


N

AUMGCA001 Provide customer service AUMGCA2001 Provide customer service Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGLM001 Apply heavy vehicle standards AUMGLM3001 Comply with heavy vehiclemodification standards


N

AUMGMA001 Participate in workplaceproductivity improvement processes AUMGMA3001 Participate in workplace productivity


N

AUMGQA001 Apply workplace technicalquality standards

AUMGQA3001 Inspect work and apply organisationtechnical quality standards


N

AUMGTA001 Read and interpret work ordersand working drawings

AUMGTA2001 Read and interpret working drawingsand work orders


N

AUMGTA002 Service vehicle after assembly AUMGTA3002 Service after assembly Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTB001 Assemble, install and tedtbraking system kits

AUMGTB3001 Assemble and install braking systemkit


N

AUMGTD001 Perform wheel alignmentoperations AUMGTD3001 Perform wheel alignment operations


N

AUMGTG001 Install fixed and moveableglass components on vehicles

AUMGTG3001 Install fixed and moveable glasscomponents


N

AUMGTM001 Assemble vehicle components AUMGTM2001 Assemble components Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTM002 Assemble vehicle frames andaxles AUMGTM3002 Assemble frame and axle


N

AUMGTM003 Install and replace mechanicalunits and assemblies

AUMGTM3003 Install or replace mechanical unitsand assemblies


N

AUMGTM004 Install and fit out components AUMGTM2004 Install and fit out componentsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTM005 Read and interpret engineeringdrawings and determine requirements

AUMGTM3005 Read and interpret engineeringdrawings and job specifications


N

AUMGTM006 Assemble, install and testhydraulic system kits

AUMGTM3006 Assemble and install hydraulic systemkit


N

AUMGTM007 Assemble, install and testpneumatic system kits

AUMGTM3007 Assemble and install pneumaticsystem kit


N

AUMGTM008 Bond and repair fibreglasscomponents

AUMGTM3008 Bond and repair components usingfibreglass reinforced plastic techniques


N

AUMGTN001 Replace and repair vehiclebody panels and fittings

AUMGTN3001 Rectify and replace vehicle bodypanels and ancillary fittings


N

AUMGTP001 Finish and paint vehicle bodyand part surfaces AUMGTP3001 Finish surfaces for painting


N

AUMGTP002 Rework vehicle paint faults AUMGTP3002 Rework paint faultsUnit code changeUnit updated to reflect Standards forTraining Package

N

2/06/2015 2:25 pm


AUMGTR001 Install and replace vehicleelectrical units and assemblies

AUMGTR3001 Install or replace electrical andelectronic units and assemblies


N

AUMGTR002 Manufacture and modifyvehicle wiring harnesses

AUMGTR3002 Manufacture or modify wiringharnesses


N

AUMGTR003 Test, modify and repair vehicleelectrical circuits and systems

AUMGTR3003 Perform minor modifications andrepairs to electrical circuits and systems


N

AUMGTS001 Prepare materials forfabrication using jigs and fixtures

AUMGTS3001 Prepare materials for fabrication usingjigs and fixtures


N

AUMGTS002 Prepare materials forfabrication using manual processes

AUMGTS3002 Prepare materials for fabrication usingmanual processes


N

AUMGTS003 Fabricate plugs AUMGTS3003 Fabricate plugs Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTS004 Fabricate parts for vehicle sub-assemblies AUMGTS3004 Fabricate parts for sub-assemblies


N

AUMGTT001 Apply trim to vehiclecomponents AUMGTT2001 Apply trim to components


N

AUMGTW001 Perform basic welding, thermalcutting, heating and gouging

AUMGTW3001 Conduct basic welding, thermalcutting, heating and gouging operations


N

AUMGTW002 Perform mechanical cutting AUMGTW3002 Conduct mechanical cuttingoperations


N

AUMGTW003 Perform manual metal arcwelding

AUMGTW3003 Perform manual metal arc weldingoperations


N

AUMGTW004 Perform gas tungsten arcwelding

AUMGTW3004 Perform gas tungsten arc weldingoperations


N

AUMGTW005 Perform gas metal arc welding AUMGTW3005 Perform gas metal arc weldingoperations


N

AUMGTW006 Machine parts AUMGTW3006 Machine partsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTY001 Paint vehicle chassis andpanels AUMGTY3001 Paint chassis or panels


N

AUMGTY002 Install vehicle components AUMGTY3002 Mount and install assembledcomponent to chassis or frame


N

AUMGTY003 Modify and repair chassis andframes

AUMGTY3003 Modify or rectify chassis and frameand associated components


N

2/06/2015 2:25 pm


Qualification Code and Title Relationship to Previous Training PackageAUM V1 E/N Comment in Relation to Training

Package AUM12 Version 1.0

AUM10113 Certificate I in AutomotiveManufacturing

AUM10112 Certificate I in AutomotiveManufacturing E Qualification updated to reflect new







N

Qualification updated to reflect newTraining Package standardsCore units reduced from 7 to 5 bymoving AUMGTW001 and AUMGTW002from core to elective








AUM40112 Certificate IV in AutomotiveManufacturing E Qualification updated to reflect new


AUM50113 Diploma of AutomotiveManufacturing AUM50112 Diploma of Automotive Manufacturing E Qualification updated to reflect new


Qualification mappingMAPPING OF QUALIFICATIONS



2/06/2015 2:25 pm


Unit mappingMAPPING OF UNITS OF COMPETENCY


All AUM units of competency have been updated to reflect the new Standards for Training Packages (SCOTESE,2012). This has included revisingelements and performance criteria, and adding the following sections: application, foundation skills, range of conditions, performance evidence,knowledge evidence, assessment conditions, unit mapping information and links.


AUM Unit code and unit title AUM12 v1 unit code and Unit title Comment in relation to AUM12 v1 E/N

AUMABA3001 Perform forklift driving and liftingoperations Unit removed

AUMAKM4001 Monitor and test computerisedequipment Unit removed

AUMFQM3003 Apply visual factory principles andpractices to an automotive manufacturingenvironment

Unit removed and replaced with importedunit MSS402040A Apply 5S procedures

AUMFTQ3001 Install engine and drive train Unit removed

AUMGMM3001 Contribute to workplace relationshipsand processes Unit removed

AUMABA002 Operate load shifting equipment AUMABA3002 Operate load shifting equipment Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMABM001 Control stock AUMABM4001 Control stockUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMAFA001 Apply for jobs and undertakejob interviews AUMAFA1001 Manage personal career goals


N

AUMAFA002 Maintain workplacerelationships

AUMAFA2002 Maintain effective workplacerelationships


N

AUMAKM002 Produce computer-aideddrawings AUMAKM5002 Produce computer-aided drawings


N

AUMAMA001 Contribute to production goals AUMAMA2001 Manage personal workplaceUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMAMA002 Work effectively in teams AUMAMA2002 Work effectively with others in teams Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMAMA003 Prepare new product designs AUMAMA4003 Prepare new product designsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMAMA004 Coordinate automotive projectactivities AUMAMA5004 Coordinate project activities


N

AUMAMM001 Influence and lead workgroups in an automotive manufacturingworkplace

AUMAMM3001 Influence and lead work groups in anautomotive manufacturing environment


N

AUMANA001 Prepare and documentquotations AUMANA3001 Prepare and document quotation


N

AUMAQA001 Apply quality assurancetechniques AUMAQA4001 Apply quality assurance techniques


N

AUMASA001 Apply safe work practices in theautomotive manufacturing environment

AUMASA2001 Monitor and maintain a safe workplaceand environment


N

AUMASM001 Monitor and maintain a safeautomotive work environment

AUMASM3001 Maintain a safe automotivemanufacturing work environment


N

2/06/2015 2:25 pm


AUMATA001 Develop documentation andprocedures

AUMATA2001 Develop and produce documentationand procedures


N

AUMATA002 Conduct post-productioninspections and tests

AUMATA3002 Conduct final inspections andfunctional tests


N

AUMATA003 Repair faults in vehicle metalcomponents

AUMATA3003 Rectify faults in vehicle metalcomponents


N

AUMATA004 Diagnose and repairmechanical faults

AUMATA3004 Rectify mechanical faults onassembled vehicles


N

AUMATA005 Rectify assembly faults AUMATA3005 Rectify assembly faults in assembledvehicles


N

AUMATA006 Provide automotivemanufacturing advice AUMATA4006 Provide technical advice


N

AUMATA007 Conduct vehicle performancetests

AUMATA4007 Conduct simulated or roadperformance test


N

AUMATA008 Produce drawings manually AUMATA5008 Produce drawings manuallyUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMATE001 Rework faulty productionengines AUMATE3001 Rework production engines


N

AUMATK001 Use and maintain tools andequipment

AUMATK1001 Select and use tools and equipment inan automotive manufacturing environment


N

AUMATK002 Prepare and operate tools,equipment and machinery

AUMATK2002 Prepare, use and operate equipment,tools and machinery


N

AUMATK003 Monitor and maintainautomotive equipment

AUMATK3003 Monitor and maintain equipment, toolsand machinery


N

AUMATK004 Use and maintain measuringequipment AUMATK4004 Use measuring equipment


N

AUMATK005 Calibrate measuring equipment AUMATK4005 Calibrate measuring equipment inautomotive development


N

AUMATK006 Test plant, tools, equipment,product and systems

AUMATK4006 Test plant, tooling, equipment, productand systems


N

AUMATK007 Install vehicle plant, equipmentand systems AUMATK4007 Install plant, equipment or systems


N

AUMATK008 Maintain vehicle plant, tools,equipment and systems

AUMATK4008 Maintain plant, tooling, equipment orsystems


N

AUMATK009 Repair vehicle plant, tools,equipment and systems

AUMATK4009 Repair plant, tooling, equipment orsystems


N

AUMATK010 Manufacture and modify vehicleplant, tools, equipment and systems

AUMATK4010 Manufacture or modify plant, tooling,equipment or systems


N

AUMATK011 Use technical data relating toplant, tools, equipment and systems

AUMATK4011 Interpret manuals, drawings andcircuits for plant, tooling, equipment or systems


N

AUMATN001 Repair structural faults invehicles

AUMATN3001 Conduct structural rectification ofvehicle bodies


N

AUMATP001 Rectify minor faults in vehiclepaintwork AUMATP3001 Rectify paintwork


N

Unit code change

2/06/2015 2:25 pm


AUMATP002 Control vehicle paint lineproduction

AUMATP3002 Control paint line productionprocesses

Unit updated to reflect Standards forTraining Package

N

AUMATR001 Repair electrical faults inassembled vehicles

AUMATR3001 Rectify electrical faults on assembledvehicles


N

AUMATR002 Install and maintain motorvehicle instrumentation sensors andtransmitters

AUMATR4002 Use sensors to acquire motor vehicledata for development purposes


N

AUMATS001 Stamp and press vehicle parts AUMATS2001 Stamp and press partsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMATW001 Test vehicle weldsultrasonically AUMATW3001 Test welds ultrasonically


N

AUMATW002 Inspect welding AUMATW4002 Conduct welding inspectionUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFBK001 Receive and dispatch vehiclecomponents

AUMFBK2001 Receive and dispatch materials,equipment and tools


N

AUMFBM001 Prepare and processautomotive materials and components

AUMFBM2001 Prepare and process materials andcomponents


N

AUMFMM001 Reduce cycle time inautomotive manufacturing work processes AUMFMM3001 Reduce cycle time in work processes


N

AUMFMM002 Reduce waste in automotivemanufacturing work processes AUMFMM3002 Reduce waste in work processes


N

AUMFMM003 Plan and organise automotiveproduction and assembly processes AUMFMM3003 Plan and organise production


N

AUMFQM001 Apply continuous improvementin automotive manufacturing

AUMFQM2001 Monitor and maintain continuousimprovement of systems and processes


N

AUMFQM002 Sustain quality standards in anautomotive manufacturing workplace AUMFQM3002 Sustain quality standards


N

AUMFTA001 Document manufacturingdesign processes AUMFTA3001 Document designs


N

AUMFTA002 Perform die coating AUMFTA3002 Conduct die coatingUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFTA003 Set and adjust automotiveproduction machine tools AUMFTA3003 Conduct tool setting


N

AUMFTA004 Monitor and maintain operationof metal treatment plants

AUMFTA3004 Monitor and maintain metals treatmentplant operations


N

AUMFTA005 Analyse test vehicles forresearch purposes

AUMFTA4005 Analyse a test vehicle for researchpurposes


N

AUMFTA006 Develop research reports onvehicle design, development and production AUMFTA5006 Produce research reports


N

AUMFTA007 Evaluate vehicle design,development and production information

AUMFTA5007 Seek, evaluate, organise and prepareinformation


N

AUMFTE001 Conduct engine hot tests AUMFTE3001 Conduct engine hot testUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFTK001 Test automotive productioncomponents, equipment, and systems

AUMFTK5001 Establish a test or trial for componentsof plant, tooling, equipment or systems


N

AUMFTM001 Undertake preliminary fault AUMFTM3001 Undertake preliminary fault finding Unit code change

2/06/2015 2:25 pm


finding and machine reset and machine reset Unit updated to reflect Standards forTraining Package

N

AUMFTM002 Create new product designs AUMFTM5002 Create new product designsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMFTM003 Develop conceptual modelsand prototypes

AUMFTM5003 Develop conceptual models andprototypes


N

AUMGCA001 Provide customer service AUMGCA2001 Provide customer service Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGLM001 Apply heavy vehicle standards AUMGLM3001 Comply with heavy vehiclemodification standards


N

AUMGMA001 Participate in workplaceproductivity improvement processes AUMGMA3001 Participate in workplace productivity


N

AUMGQA001 Apply workplace technicalquality standards

AUMGQA3001 Inspect work and apply organisationtechnical quality standards


N

AUMGTA001 Read and interpret work ordersand working drawings

AUMGTA2001 Read and interpret working drawingsand work orders


N

AUMGTA002 Service vehicle after assembly AUMGTA3002 Service after assembly Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTB001 Assemble, install and tedtbraking system kits

AUMGTB3001 Assemble and install braking systemkit


N

AUMGTD001 Perform wheel alignmentoperations AUMGTD3001 Perform wheel alignment operations


N

AUMGTG001 Install fixed and moveableglass components on vehicles

AUMGTG3001 Install fixed and moveable glasscomponents


N

AUMGTM001 Assemble vehicle components AUMGTM2001 Assemble components Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTM002 Assemble vehicle frames andaxles AUMGTM3002 Assemble frame and axle


N

AUMGTM003 Install and replace mechanicalunits and assemblies

AUMGTM3003 Install or replace mechanical unitsand assemblies


N

AUMGTM004 Install and fit out components AUMGTM2004 Install and fit out componentsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTM005 Read and interpret engineeringdrawings and determine requirements

AUMGTM3005 Read and interpret engineeringdrawings and job specifications


N

AUMGTM006 Assemble, install and testhydraulic system kits

AUMGTM3006 Assemble and install hydraulic systemkit


N

AUMGTM007 Assemble, install and testpneumatic system kits

AUMGTM3007 Assemble and install pneumaticsystem kit


N

AUMGTM008 Bond and repair fibreglasscomponents

AUMGTM3008 Bond and repair components usingfibreglass reinforced plastic techniques


N

AUMGTN001 Replace and repair vehiclebody panels and fittings

AUMGTN3001 Rectify and replace vehicle bodypanels and ancillary fittings


N

AUMGTP001 Finish and paint vehicle bodyand part surfaces AUMGTP3001 Finish surfaces for painting


N

AUMGTP002 Rework vehicle paint faults AUMGTP3002 Rework paint faultsUnit code changeUnit updated to reflect Standards for N

2/06/2015 2:25 pm


Training Package

AUMGTR001 Install and replace vehicleelectrical units and assemblies

AUMGTR3001 Install or replace electrical andelectronic units and assemblies


N

AUMGTR002 Manufacture and modifyvehicle wiring harnesses

AUMGTR3002 Manufacture or modify wiringharnesses


N

AUMGTR003 Test, modify and repair vehicleelectrical circuits and systems

AUMGTR3003 Perform minor modifications andrepairs to electrical circuits and systems


N

AUMGTS001 Prepare materials forfabrication using jigs and fixtures

AUMGTS3001 Prepare materials for fabrication usingjigs and fixtures


N

AUMGTS002 Prepare materials forfabrication using manual processes

AUMGTS3002 Prepare materials for fabrication usingmanual processes


N

AUMGTS003 Fabricate plugs AUMGTS3003 Fabricate plugs Unit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTS004 Fabricate parts for vehicle sub-assemblies AUMGTS3004 Fabricate parts for sub-assemblies


N

AUMGTT001 Apply trim to vehiclecomponents AUMGTT2001 Apply trim to components


N

AUMGTW001 Perform basic welding, thermalcutting, heating and gouging

AUMGTW3001 Conduct basic welding, thermalcutting, heating and gouging operations


N

AUMGTW002 Perform mechanical cutting AUMGTW3002 Conduct mechanical cuttingoperations


N

AUMGTW003 Perform manual metal arcwelding

AUMGTW3003 Perform manual metal arc weldingoperations


N

AUMGTW004 Perform gas tungsten arcwelding

AUMGTW3004 Perform gas tungsten arc weldingoperations


N

AUMGTW005 Perform gas metal arc welding AUMGTW3005 Perform gas metal arc weldingoperations


N

AUMGTW006 Machine parts AUMGTW3006 Machine partsUnit code changeUnit updated to reflect Standards forTraining Package

N

AUMGTY001 Paint vehicle chassis andpanels AUMGTY3001 Paint chassis or panels


N

AUMGTY002 Install vehicle components AUMGTY3002 Mount and install assembledcomponent to chassis or frame

Unit code changeUnit updated to reflect Standards forTraining Package N

AUMGTY003 Modify and repair chassis andframes

AUMGTY3003 Modify or rectify chassis and frameand associated components


N

2/06/2015 2:25 pm


Qualifications and UnitsTABLE OF CONTENTS

Summary of AQF qualifications in the AUM Automotive Manufacturing Training Package Version 1Summary of Units of Competency in the AUM Automotive Manufacturing Training Package Version 1. AUM units do not have any prerequisiterequirementsImported Units of Competency in AUM Automotive Manufacturing Training Package Version 1

Summary of AQF qualifications in the AUM Automotive Manufacturing Training Package Version 1

CODE TITLEAQF IAUM10113 Certificate I in Automotive ManufacturingAQF IIAUM20113 Certificate II in Automotive Manufacturing Production - Passenger Motor VehicleAUM20213 Certificate II in Automotive Manufacturing Production - Bus, Truck and TrailerAQF III

AUM30113 Certificate III in Automotive Manufacturing Technical Operations - Passenger Motor Vehicle

AUM30213 Certificate III in Automotive Manufacturing Technical Operations - Bus, Truck and TrailerAQF IV AUM40113 Certificate IV in Automotive ManufacturingDiplomaAUM50113 Diploma of Automotive Manufacturing

Summary of Units of Competency in the AUM Automotive Manufacturing Training Package Version 1. AUM units do not have any prerequisiterequirements.

UNIT CODE UNIT TITLEA: CommonABA - Common - Support and Logistics AUMABA002 Operate load shifting equipmentABM - Common - Support and Logistics - ManufactureAUMABM001 Control stockAFA - Common - Foundation Skills AUMAFA001 Apply for jobs and undertake job interviewsAUMAFA002 Maintain workplace relationshipsAKM - Common - Information Technology - Manufacture AUMAKM002 Produce computer-aided drawingsAMA - Common - Management, Leadership and Supervision AUMAMA001 Contribute to production goalsAUMAMA002 Work effectively in teamsAUMAMA003 Prepare new product designsAUMAMA004 Coordinate automotive project activitiesAMM - Common - Management, Leadership and Supervision - Manufacture AUMAMM001 Influence and lead work groups in an automotive manufacturing workplace ANA - Common - Loss Assessment or Repair Quoting AUMANA001 Prepare and document quotations AQA - Common - Quality

http://www.asacompanionvolumes.com.au/print/book/export/html/175#AQF

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Summ

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Imported

2/06/2015 2:25 pm


AUMAQA001 Apply quality assurance techniquesASA - Common - Health and Safety AUMASA001 Apply safe work practices in the automotive manufacturing environmentASM - Common - Health and Safety - Manufacture AUMASM001 Monitor and maintain a safe automotive work environmentATA - Common - Technical AUMATA001 Develop documentation and proceduresAUMATA002 Conduct post-production inspections and testsAUMATA003 Rectify faults in vehicle metal componentsAUMATA004 Diagnose and repair mechanical faultsAUMATA005 Rectify assembly faultsAUMATA006 Provide automotive manufacturing advice AUMATA007 Conduct vehicle performance tests AUMATA008 Produce drawings manuallyATE - Common - Technical - Engines AUMATE001 Rework faulty production enginesATK - Common - Technical - Tools and Equipment AUMATK001 Use and maintain tools and equipmentAUMATK002 Prepare and operate tools, equipment and machineryAUMATK003 Monitor and maintain automotive equipmentAUMATK004 Use and maintain measuring equipmentAUMATK005 Calibrate measuring equipmentAUMATK006 Test plant, tools, equipment, product and systemsAUMATK007 Install vehicle plant, equipment and systemsAUMATK008 Maintain vehicle plant, tools, equipment and systemsAUMATK009 Repair vehicle plant, tools, equipment and systems AUMATK010 Manufacture and modify vehicle plant, tools, equipment and systemsAUMATK011 Use technical data relating to plant, tools, equipment and systemsATN - Common - Technical - Body AUMATN001 Repair structural faults in vehiclesATP - Common - Technical - Paint AUMATP001 Rectify minor faults in vehicle paintworkAUMATP002 Control vehicle paint line productionATR - Common - Technical - Electrical and Electronic AUMATR001 Repair electrical faults in assembled vehiclesAUMATR002 Install and maintain motor vehicle instrumentation sensors and transmittersATS - Common - Technical - FabricationAUMATS001 Stamp and press vehicle partsATW - Common - Technical - Welding, Grinding, Machining and Soldering AUMATW001 Test vehicle welds ultrasonically AUMATW002 Inspect weldingF: Manufacturing - Passenger VehicleFBK - Passenger Vehicle - Support and Logistics - Tools and Equipment AUMFBK001 Receive and dispatch vehicle components FBM - Passenger Vehicle - Support and Logistics - Manufacture AUMFBM001 Prepare and process automotive materials and componentsFMM - Passenger Vehicle - Management, Leadership and Supervision - Manufacture AUMFMM001 Reduce cycle time in automotive manufacturing work processesAUMFMM002 Reduce waste in automotive manufacturing work processesAUMFMM003 Plan and organise automotive production and assembly processes

2/06/2015 2:25 pm


FQM - Passenger Vehicle - Quality - Manufacture AUMFQM001 Apply continuous improvement in automotive manufacturingAUMFQM002 Sustain quality standards in an automotive manufacturing workplaceFTA - Passenger Vehicle - Technical AUMFTA001 Document manufacturing design processes AUMFTA002 Perform die coatingAUMFTA003 Set and adjust automotive production machine toolsAUMFTA004 Monitor and maintain operation of metal treatment plants AUMFTA005 Analyse test vehicles for research purposes AUMFTA006 Develop research reports on vehicle design, development and productionAUMFTA007 Evaluate vehicle design, development and production informationFTE - Passenger Vehicle - Technical - Engines AUMFTE001 Conduct engine hot tests FTK - Passenger Vehicle - Technical - Tools and Equipment AUMFTK001 Test automotive production components, equipment and systemsFTM - Passenger Vehicle - Technical - Manufacture AUMFTM001 Undertake preliminary fault finding and machine resetAUMFTM002 Create new product designsAUMFTM003 Develop conceptual models and prototypesG: Manufacture - Bus, Truck and TrailerGCA - Bus, Truck and Trailer - Sales and MarketingAUMGCA001 Provide customer serviceGLM - Bus, Truck and Trailer - Regulatory or Legal - Manufacture AUMGLM001 Apply heavy vehicle standardsGMA - Bus, Truck and Trailer - Management, Leadership and Supervision AUMGMA001 Participate in workplace productivity improvement processesGQA - Bus, Truck and Trailer - Quality AUMGQA001 Apply workplace technical quality standardsGTA - Bus, Truck and Trailer - Technical AUMGTA001 Read and interpret work orders and working drawingsAUMGTA002 Service vehicle after assemblyGTB - Bus, Truck and Trailer - Brakes AUMGTB001 Assemble, install and test braking system kitsGTD - Bus, Truck and Trailer - Technical - Steering and Suspension AUMGTD001 Perform wheel alignment operationsGTG - Bus, Truck and Trailer - Technical - Glazing AUMGTG001 Install fixed and moveable glass components on vehiclesGTM - Bus, Truck and Trailer - Technical - Manufacture AUMGTM001 Assemble vehicle componentsAUMGTM002 Assemble vehicle frames and axlesAUMGTM003 Install and replace mechanical units and assembliesAUMGTM004 Install and fit out componentsAUMGTM005 Read and interpret engineering drawings and determine requirements AUMGTM006 Assemble, install and test hydraulic system kitsAUMGTM007 Assemble, install and test pneumatic system kits AUMGTM008 Bond and repair fibreglass componentsGTN - Bus, Truck and Trailer - Technical - Body AUMGTN001 Replace and repair vehicle body panels and fittingsGTP - Bus,Truck and Trailer - Technical - Paint AUMGTP001 Finish and paint vehicle body and part surfaces

2/06/2015 2:25 pm


AUMGTP002 Rework vehicle paint faultsGTR - Bus, Truck and Trailer - Technical - Electrical and ElectronicAUMGTR001 Install and replace vehicle electrical units and assembliesAUMGTR002 Manufacture and modify vehicle wiring harnessesAUMGTR003 Test, modify and repair vehicle electrical circuits and systemsGTS - Bus, Truck and Trailer - Technical - FabricationAUMGTS001 Prepare materials for fabrication using jigs and fixturesAUMGTS002 Prepare materials for fabrication using manual processesAUMGTS003 Fabricate plugsAUMGTS004 Fabricate parts for vehicle sub-assembliesGTT - Bus, Truck and Trailer - Technical - Trimming and Upholstery AUMGTT001 Apply trim to vehicle componentsGTW - Bus, Truck and Trailer - Technical - Welding, Grinding, Machining and SolderingAUMGTW001 Perform basic welding, thermal cutting, heating and gougingAUMGTW002 Conduct mechanical cuttingAUMGTW003 Perform manual metal arc weldingAUMGTW004 Perform gas tungsten arc weldingAUMGTW005 Perform gas metal arc weldingAUMGTW006 Machine partsGTY - Bus, Truck and Trailer - Technical - Chassis and FrameAUMGTY001 Paint vehicle chassis and panelsAUMGTY002 Install vehicle componentsAUMGTY003 Modify and repair chassis and frames

Imported Units of Competency in AUM Automotive Manufacturing Training Package Version 1

UNIT CODE UNIT TITLE PREREQUISITESAUR12 Automotive Industry Retail, Service and Repair Training Package AURAEA1001 Identify environmental requirements in an automotive workplace AURAEA2002 Apply environmental and sustainability best practice in an automotive workplace AURAEA4004 Manage environmental compliance in an automotive workplace AURAFA2001 Use numbers in an automotive workplace AURAFA2003 Communicate effectively in an automotive workplace AURAFA5006 Prepare technical reports AURETA5001 Analyse and evaluate electrical and electronic faults in electric over-hydraulic systems AURETA5002 Analyse and evaluate electrical and electronic faults in safety systems AURETA5003 Analyse and evaluate electrical and electronic faults in monitoring and protection systems AURETA5004 Analyse and evaluate electrical and electronic faults in convenience and entertainment systems AURETA5005 Analyse and evaluate electrical and electronic faults in theft-deterrent systems AURETA5006 Analyse and evaluate electrical and electronic faults in climate-control systems AURETB5002 Analyse and evaluate electrical and electronic faults in braking systems AURETD5002 Analyse and evaluate electrical and electronic faults in stability, steering and suspension systems AURETE5001 Analyse and evaluate electrical and electronic faults in engine management systems AURETH5013 Analyse and evaluate electrical and electronic faults in electric and hybrid vehicle systems AURETR2006 Carry out soldering of electrical wiring and circuits AURETR5033 Develop and apply electronic systems modification AURETR5034 Develop and apply electrical systems modification AURETX5001 Analyse and evaluate electrical and electronic faults in transmission and driveline systems AURHTB3001 Repair air braking systems AURHTB4004 Overhaul air braking systems and components

2/06/2015 2:25 pm


AURHTD3003 Repair suspension systems (heavy vehicle) AURLTB5002 Analyse and evaluate light vehicle braking system faults AURLTD5007 Analyse and evaluate light vehicle steering and suspension system faults AURLTE5003 Analyse and evaluate light vehicle engine and fuel system faults AURLTQ5003 Analyse and evaluate light vehicle driveline system faults AURMTE4001 Test engines using a dynamometer AURTTA4021 Carry out diagnosis of complex system faults AURTTB2004 Inspect and service air braking systems AURTTD2003 Inspect suspension systems AURTTD2004 Inspect and service suspension systems AURTTL5015 Develop and apply gas fuel system modifications BSB07 Business Services Training Package BSBCMM101A Apply basic communication skills BSBDIV301A Work effectively with diversity BSBINM301A Organise workplace information BSBINM302A Utilise a knowledge management system BSBINN301A Promote innovation in a team environment BSBLED401A Develop teams and individuals BSBPMG412A Apply project cost-management techniques BSBPMG514A Manage project cost BSBPMG517A Manage project risk BSBPMG521A Manage project integration BSBRKG304B Maintain business records BSBRSK401A Identify risk and apply risk management processes BSBWHS301A Maintain workplace safety BSBWHS506A Contribute to developing, implementing and maintaining WHS management systems BSBWOR502B Ensure team effectiveness ICA11 Information and Communication Training Package ICAICT103A Use, communicate and search securely on the internet MEM05 Metal and Engineering Training Package MEM13014A Apply principles of occupational health and safety in the work environment MSA07 Manufacturing Training Package MSAENV272B Participate in environmentally sustainable work practices MSAENV472B Implement and monitor environmentally sustainable work practices MSAENV672B Develop workplace policy and procedures for environmental sustainability

MSAPMSUP390A Use structured problem solving tools MSL09 Laboratory Operations Training Package MSL924002A Use laboratory application software MSL973001A Perform basic tests MSL973007A Perform microscopic examination MSS11 Sustainability Training Package MSS402001A Apply competitive systems and practices MSS402002A Sustain process improvements MSS402010A Manage the impact of change on own work MSS402020A Apply quick changeover procedures MSS402021A Apply Just in Time procedures MSS402030A Apply cost factors to work practices MSS402031A Interpret product costs in terms of customer requirements MSS402040A Apply 5S procedures MSS402050A Monitor process capability

2/06/2015 2:25 pm


MSS402051A Apply quality standards MSS402060A Use planning software systems in operations MSS402061A Use SCADA systems in operations MSS402080A Undertake root cause analysis MSS403001A Implement competitive systems and practices MSS403002A Ensure process improvements are sustained MSS403011A Facilitate implementation of competitive systems and practices MSS403021A Facilitate a Just In Time system MSS403030A Improve cost factors in work practices MSS403032A Analyse manual handling processes MSS403035A Implement the visual workplace MSS403040A Facilitate and improve implementation of 5S MSS403041A Facilitate breakthrough improvements MSS403051A Mistake proof an operational process MSS404050A Undertake process capability improvements MSS404052AMSS404052A Apply statistics to operational processes MSS404053A Use six sigma techniques MSS404052AMSS404060A Facilitate the use of planning software systems in a work area or team MSS404082A Assist in implementing a proactive maintenance strategy TLI10 Transport and Logistics Training PackageTLIA3017A Identify products and store to specifications TLIA3023A Coordinate stocktakes TLIA4028A Assess and monitor optimum stock levels TLID3036A Lift and move load using a mobile crane

2/06/2015 2:25 pm


Entry RequirementsThe following table list all qualifications in the AUM Training Package, along with any specific mandatory entry requirements.

QUALIFICATIONCODE QUALIFICATION TITLE ENTRY REQUIREMENTS

AUM10113 Certificate I in Automotive Manufacturing There are no mandatory entry requirements for this qualification. This qualification maybe accessed by direct entry.

AUM20113 Certificate II in Automotive ManufacturingProduction – Passenger Motor Vehicle

There are no mandatory entry requirements for this qualification. This qualification maybe accessed by direct entry.

AUM20213 Certificate II in Automotive ManufacturingProduction – Bus, Truck and Trailer


AUM30113Certificate III in AutomotiveManufacturing Technical Operations –Passenger Motor Vehicle


AUM30213Certificate III in AutomotiveManufacturing Technical Operations -Bus, Truck and Trailer



Those undertaking this qualification are required to have completed AUMGQA001Inspect work and apply workplace technical quality standards, or be able to demonstrateequivalent competency.

AUM50113 Diploma of Automotive ManufacturingThose undertaking this qualification are required to have completed AUMGQA001Inspect work and apply workplace technical quality standards, or be able to demonstrateequivalent competency.

2/06/2015 2:25 pm


Regulations and LicensingREGISTRATION AND LICENSING REQUIREMENTS

This section provides information on licensing/registration requirements for this Training Package, with the following important disclaimer.

The developers of this Training Package consider that no licensing or registration requirements apply to RTOs, assessors or candidates with respect tothis Training Package. Contact the relevant State or Territory Department(s) to check if there are any licensing or registration requirements with whichyou must comply. For contact details of licensing authorities go to the following links:

National Occupational Licensing System - http://nola.gov.au/

Licence Recognition - http://www.licencerecognition.gov.au/authorities.aspx

http://nola.gov.au/

http://www.licencerecognition.gov.au/authorities.aspx

2/06/2015 2:25 pm


Implementation InformationTable of contents

Key features of the Training Package and industryQualifications and the various industry sectorsQualification Pathways and Job OutcomesAdvice on any WHS implications in the industryResources and Equipment ListLegal considerations

KEY FEATURES OF THE TRAINING PACKAGE AND INDUSTRY

Information on the key features of the Training Package and the industry that will impact on the selection of training pathways

QUALIFICATIONS AND THE VARIOUS INDUSTRY SECTORS

Explanation of the qualifications and the various industry sectors

QUALIFICATION PATHWAYS AND JOB OUTCOMES

The following table list the qualifications and occupational outcomes in the automotive manufacturing industry

QualificationCode Qualification Title Occupational Outcomes of Qualification Qualification

PathwaysEntryRequirements

AUM10113 Certificate I in AutomotiveManufacturing n/a Select here Select here

AUM20113Certificate II in AutomotiveManufacturing Production –Passenger Motor Vehicle

This qualification is intended to prepare new employees or recognise anddevelop existing workers who are involved in the manufacture ofpassenger motor vehicles.

Job roles related to this qualification may include:

Product AssemblerVehicle Body AssemblerComponent AssemblerWarehouse and Material LogisticsAutomotive Manufacturing Production Worker

Select here Select here

AUM20213Certificate II in AutomotiveManufacturing Production –Bus, Truck and Trailer

This qualification is intended to prepare new employees or recognise anddevelop existing workers who are manufacturing components for vehicles.


Automotive Body BuilderAutomotive Manufacturing Production WorkerComponent Assembler


AUM30113

Certificate III in AutomotiveManufacturing TechnicalOperations –

Passenger Motor Vehicle

This qualification is intended to prepare new employees or recognise anddevelop existing workers who manufacture vehicles.


Automotive Manufacturing TechnicianVehicle Body BuilderCoach Builder TechnicianSub Assembly Technician


AUM30213Certificate III in AutomotiveManufacturing TechnicalOperations – Bus, Truckand Trailer

This qualification is intended to prepare new employees or recognise anddevelop existing workers who manufacture vehicles.


Automotive Manufacturing TechnicianVehicle Body BuilderCoach Builder TechnicianSub Assembly Technician



This qualification is a post-trade level qualification in the automotivemanufacturing industry. It is designed for a Lead Technician(Bus/Truck/Trailer) and Lead Technician (Passenger Vehicle) covering a Select here Select here

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Industry

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Sectors

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Outcomes

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Advice

http://www.asacompanionvolumes.com.au/print/book/export/html/175#List

http://www.asacompanionvolumes.com.au/print/book/export/html/175#Legal













2/06/2015 2:25 pm


range of specialised functions.

AUM50113 Diploma of AutomotiveManufacturing

This qualification is a post-trade level qualification in the automotivemanufacturing industry.

It is designed for managers and supervisors covering a range ofspecialised functions in the automotive manufacturing sector.


Line ManagerAutomotive Production ManagerAutomotive Production Supervisor


ADVICE ON ANY WHS IMPLICATIONS IN THE INDUSTRY

Advice on any WHS implications in the industry information coming soon

RESOURCES AND EQUIPMENT LIST

The following tables list the resources and equipment relevant to the AUM Training Package

AUM10113 Certificate I in Automotive Manufacturing

The following table lists the resources and equipment required for the core units of this qualification:

CORE UNITS RESOURCES AND EQUIPMENT

AUMAFA001 Apply for jobs and undertake job interview

employment databases, including paper-based and internetcomputer with word-processing software that includes resume templates

AUMATK001 Use and maintain tools and equipment

automotive manufacturing workplace or simulated workplaceworkplace procedures relating to the use of tools and equipmenttools and equipment relevant to the taskstorage facilities for tools and equipment

MEM13014A Apply principles of occupational health and safety in the work environment

Resources for this imported unit are not listed.

AUM20113 Certificate II in Automotive Manufacturing Production – Passenger Motor Vehicle


Core Units Resources and Equipment

AUMAFA002 Maintain workplace relationships

automotive manufacturing workplace or simulated workplaceworkplace instructions and messagesworkplace conflict, diversity and equal opportunity procedures

AUMAMA001 Contribute to production goals

automotive manufacturing workplace or simulated workplaceworkplace procedures and instructions relevant to the work area and production goalsproduction schedules, work plans and job specificationsproduction performance and continuous improvement indicators relating to production goalswork sheets and documentation relating to production goals

AUMAMA002 Work effectively in teams

automotive manufacturing workplace or simulated workplaceworkplace procedures relating to working effectively with others in teamsworkplace team meeting notices and schedulesworks teams made up of a range of different work groups



2/06/2015 2:25 pm


meeting agendas

AUMASA001 Apply safe work practices in the automotive manufacturing environment

automotive manufacturing workplace or simulated workplaceworkplace procedures that support safe work practicespersonal protective equipment (PPE) appropriate to the candidate's work areaa range of workplace material requiring handling and storagemanual handling equipmentincident and accident reportsrisk assessment forms

AUMATK002 Prepare and operate tools, equipment and machinery

automotive manufacturing workplace or simulated workplacetools, equipment and machinery required for the manufacturing production processoperating procedures for tools, equipment and machinery

AUMFBM001 Prepare and process automotive materials and components

manufacturing workplace or simulated workplaceworkplace instructions relating to preparing and processing automotive materials and componentsoperator instruction sheets (OISs) or workplace equivalentstandard operating procedures (SOPs) or workplace equivalentprocess control plans (PCPs) or workplace equivalenta range of materials and components required for the manufacturing processproduction tools and equipment relating to preparing and processing automotive materials and componentswork sheets and workplace documentation relating to preparing and processing automotive materials and components

AUM20213 Certificate II in Automotive Manufacturing Production – Bus, Truck and Trailer



automotive manufacturing workplace or simulated workplaceworkplace procedures relating to working effectively with others in teamsworkplace team meeting notices and scheduleswork teams made up of a range of different work groupsmeeting agendas


automotive manufacturing workplace or simulated workplaceworkplace procedures that support safe work practicesPPE appropriate to the candidate's work areaa range of workplace material requiring handling and storagemanual handling equipmentincident and accident reportsrisk assessment forms


automotive manufacturing workplace location or simulated workplacetools, equipment and machinery required for the manufacturing production processoperating procedures for tools, equipment and machinery

AUMGTA001 Read and interpret work orders and working drawings

automotive manufacturing workplace or simulated workplacework orders, working drawings and specificationstools, equipment and materials required in the drawing processworkplace procedures required to read and interpret work orders and working drawingswork instruction to read and interpret work orders and working drawings

AUMGTM001 Assemble vehicle components

automotive manufacturing workplace or simulated workplaceworkplace procedures relating to component assemblytools and equipment required for the assembly of componentsparts, fasteners, adhesives and assembly componentsvehicle or simulated frame requiring assembly of componentsassembly work sheets and job specifications

AUM30113 Certificate III in Automotive Manufacturing Technical Operations – Passenger Motor Vehicle



2/06/2015 2:25 pm


AUMAMA002 Work effectively with others


AUMASM001 Maintain and maintain a safe automotive work environment

automotive manufacturing workplace or simulated workplaceautomotive manufacturing work area instructions and plansworkplace procedures and instructions relevant to the candidate's automotive manufacturing work arearisk analysis documentationincident and accident reports

AUMFMM001 Reduce cycle time in automotive manufacturing work processes

automotive manufacturing workplace or simulated workplaceproduction cycle times and performance indicatorsvehicle or component production line or simulated production linework instructions relating to reducing cycle timetools, equipment and machinery that assist in reducing cycle time

AUMFMM002 Reduce waste in automotive manufacturing work processes

automotive manufacturing workplace or simulated workplacewaste-reduction procedures in automotive work processescontinuous improvement plan relating to waste reduction in automotive work processesworkplace instructions and procedures relevant to reducing waste in automotive work processeswaste-reduction system and equipment to reduce automotive wasteexamples of waste materials and components in manufacturing

AUMFQM002 Sustain quality standards in an automotive manufacturing workplace

automotive manufacturing workplace or simulated workplacework to be inspected and work ordersjob cards, quotes and job specificationsworkplace quality standards relating to automotive manufacturingworkplace quality measurement methods and techniques

AUMGQA001 Apply workplace technical quality standards

automotive manufacturing workplace or simulated workplacefinished automotive manufactured components requiring quality inspectiontools, equipment and machinery required for the quality inspection processworkplace quality standards relating to the work to be quality inspectedworkplace procedures relating to conducting quality inspection of completed workworkplace documentation related to performing and recording quality inspections

AUM30213 Certificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer






automotive manufacturing workplace or simulated workplaceworkplace procedures that support safe work practicesPPE appropriate to the candidate's work areaa range of workplace material requiring handling and storagemanual handling equipmentincident and accident reports risk assessment forms

AUMATK002 Prepare, and operate tolls, equipment and machinery


AUMATK003 Monitor and maintain automotive equipment

2/06/2015 2:25 pm


automotive manufacturing workplace or simulated workplacetools, equipment and machinery required for the production process of motor vehicles or componentstools, equipment and machinery operating proceduresmaintenance tools relevant to the tools, equipment and machinerymonitoring and maintenance documentation relevant to the tools, equipment and machinery

AUMGLM001 Apply heavy vehicle standards

automotive manufacturing workplace or simulated workplacetwo different heavy vehiclesheavy vehicle engineering and working drawingsVehicle Standards Bulletin 6 (VSB6) National Code of PracticeAustralian Design Rules (ADR) relevant to VSB6Heavy Vehicle National Law (HVNL) regulationsoriginal equipment manufacturer (OEM) manuals and guidestools and equipment for checking heavy vehicle against standardsworkplace documentation relevant to applying heavy vehicle standards to heavy vehicle and recording results


automotive manufacturing workplace or simulated workplacefinished automotive manufactured components requiring quality inspectionstools, equipment and machinery required for the quality inspection processworkplace quality standards relating to the work to be quality inspectedworkplace procedures relating to conducting quality inspections of completed workworkplace documentation related to performing and recording quality inspections


automotive manufacturing workplace or simulated workplacework orders, working drawings and specificationstools, equipment and materials required in the drawing processworkplace procedures required to read and interpret work orders and working drawingswork instructions to read and interpret work orders and working drawings

AUMGTM005 Read and interpret engineering drawings and determine requirements

automotive manufacturing workplace or simulated workplaceengineering drawings and job specificationsequipment and material necessary to produce production work orders

AUMGTW001 Perform basic welding, thermal cutting, heating and gouging

manufacturing workplace or simulated workplacevehicle or components that require basic welding, thermal cutting, heating and gouging operationswork health and safety (WHS) equipment, including PPE relating to basic welding, thermal cutting, heating and gougingworkplace procedures, equipment and operating instructions relating to basic welding, thermal cutting, heating and gougingwelding consumables and materialswelding equipment and operating instructionswork sheets relating to basic welding, thermal cutting, heating and gouging operations

AUMGTW002 Conduct mechanical cutting

automotive workplace or simulated workplaceWHS equipment and PPE required for mechanical cutting operationsmechanical cutting operationsmechanical cutting equipmentmaterial for cuttingmarking and measuring equipment relevant to performing mechanical cuttingworking drawings and cutting specificationswork sheets relating to performing mechanical cutting operations

AURAFA2003 Communicate effectively in an automotive workplace

Resources for this imported unit are not listed

AUM40113 Certificate IV in Automotive Manufacturing



AUMAMM001 Influence and lead work groups in an automotive manufacturing workplace

automotive manufacturing workplace or simulated workplacework instructionsworkplace conflict-resolution, diversity and equal opportunity procedures that inform work involving influencing and leading automotivemanufacturing work groups

AUMFMM003 Plan and organise automotive production and assembly processes

automotive manufacturing workplace or simulated workplace

2/06/2015 2:25 pm


component or vehicle specificationsrepair tools and equipmentcomponents that require productionworkplace instruction relating to production and assembly processesworkplace quality procedures relating to production and assembly processesworkplace environmental guidelinesWHS requirements when planning and organising productionworkplace procedures to plan productionjob orders relating to production and assembly processes

MSS403041A Facilitate breakthrough improvements


AUM50113 Diploma of Automotive Manufacturing

There are no core units for this qualification.

LEGAL CONSIDERATIONS

Legal considerations for learners in the workplace/on placements information coming soon

2/06/2015 2:25 pm


Resource and equipment listRESOURCES AND EQUIPMENT LIST

The following tables list the resources and equipment relevant to the AUM Training Package

AUM10113 Certificate I in Automotive Manufacturing


CORE UNITS RESOURCES AND EQUIPMENT

AUMAFA001 Apply for jobs and undertake job interview

employment databases, including paper-based and internetcomputer with word-processing software that includes resume templates

AUMATK001 Use and maintain tools and equipment

automotive manufacturing workplace or simulated workplaceworkplace procedures relating to the use of tools and equipmenttools and equipment relevant to the taskstorage facilities for tools and equipment

MEM13014A Apply principles of occupational health and safety in the work environment

Resources for this imported unit are not listed.

AUM20113 Certificate II in Automotive Manufacturing Production – Passenger Motor Vehicle



AUMAFA002 Maintain workplace relationships

automotive manufacturing workplace or simulated workplaceworkplace instructions and messagesworkplace conflict, diversity and equal opportunity procedures

AUMAMA001 Contribute to production goals

automotive manufacturing workplace or simulated workplaceworkplace procedures and instructions relevant to the work area and production goalsproduction schedules, work plans and job specificationsproduction performance and continuous improvement indicators relating to production goalswork sheets and documentation relating to production goals


automotive manufacturing workplace or simulated workplaceworkplace procedures relating to working effectively with others in teamsworkplace team meeting notices and schedulesworks teams made up of a range of different work groupsmeeting agendas


automotive manufacturing workplace or simulated workplaceworkplace procedures that support safe work practicespersonal protective equipment (PPE) appropriate to the candidate's work areaa range of workplace material requiring handling and storagemanual handling equipmentincident and accident reportsrisk assessment forms


automotive manufacturing workplace or simulated workplace

2/06/2015 2:25 pm


tools, equipment and machinery required for the manufacturing production processoperating procedures for tools, equipment and machinery

AUMFBM001 Prepare and process automotive materials and components

manufacturing workplace or simulated workplaceworkplace instructions relating to preparing and processing automotive materials and componentsoperator instruction sheets (OISs) or workplace equivalentstandard operating procedures (SOPs) or workplace equivalentprocess control plans (PCPs) or workplace equivalenta range of materials and components required for the manufacturing processproduction tools and equipment relating to preparing and processing automotive materials and componentswork sheets and workplace documentation relating to preparing and processing automotive materials and components

AUM20213 Certificate II in Automotive Manufacturing Production – Bus, Truck and Trailer





automotive manufacturing workplace or simulated workplaceworkplace procedures that support safe work practicesPPE appropriate to the candidate's work areaa range of workplace material requiring handling and storagemanual handling equipmentincident and accident reportsrisk assessment forms


automotive manufacturing workplace location or simulated workplacetools, equipment and machinery required for the manufacturing production processoperating procedures for tools, equipment and machinery


automotive manufacturing workplace or simulated workplacework orders, working drawings and specificationstools, equipment and materials required in the drawing processworkplace procedures required to read and interpret work orders and working drawingswork instruction to read and interpret work orders and working drawings

AUMGTM001 Assemble vehicle components

automotive manufacturing workplace or simulated workplaceworkplace procedures relating to component assemblytools and equipment required for the assembly of componentsparts, fasteners, adhesives and assembly componentsvehicle or simulated frame requiring assembly of componentsassembly work sheets and job specifications

AUM30113 Certificate III in Automotive Manufacturing Technical Operations – Passenger Motor Vehicle



AUMAMA002 Work effectively with others


AUMASM001 Maintain and maintain a safe automotive work environment

automotive manufacturing workplace or simulated workplaceautomotive manufacturing work area instructions and plansworkplace procedures and instructions relevant to the candidate's automotive manufacturing work arearisk analysis documentation

2/06/2015 2:25 pm


incident and accident reports

AUMFMM001 Reduce cycle time in automotive manufacturing work processes

automotive manufacturing workplace or simulated workplaceproduction cycle times and performance indicatorsvehicle or component production line or simulated production linework instructions relating to reducing cycle timetools, equipment and machinery that assist in reducing cycle time

AUMFMM002 Reduce waste in automotive manufacturing work processes

automotive manufacturing workplace or simulated workplacewaste-reduction procedures in automotive work processescontinuous improvement plan relating to waste reduction in automotive work processesworkplace instructions and procedures relevant to reducing waste in automotive work processeswaste-reduction system and equipment to reduce automotive wasteexamples of waste materials and components in manufacturing

AUMFQM002 Sustain quality standards in an automotive manufacturing workplace

automotive manufacturing workplace or simulated workplacework to be inspected and work ordersjob cards, quotes and job specificationsworkplace quality standards relating to automotive manufacturingworkplace quality measurement methods and techniques


automotive manufacturing workplace or simulated workplacefinished automotive manufactured components requiring quality inspectiontools, equipment and machinery required for the quality inspection processworkplace quality standards relating to the work to be quality inspectedworkplace procedures relating to conducting quality inspection of completed workworkplace documentation related to performing and recording quality inspections

AUM30213 Certificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer






automotive manufacturing workplace or simulated workplaceworkplace procedures that support safe work practicesPPE appropriate to the candidate's work areaa range of workplace material requiring handling and storagemanual handling equipmentincident and accident reports risk assessment forms

AUMATK002 Prepare, and operate tolls, equipment and machinery


AUMATK003 Monitor and maintain automotive equipment

automotive manufacturing workplace or simulated workplacetools, equipment and machinery required for the production process of motor vehicles or componentstools, equipment and machinery operating proceduresmaintenance tools relevant to the tools, equipment and machinerymonitoring and maintenance documentation relevant to the tools, equipment and machinery

AUMGLM001 Apply heavy vehicle standards

automotive manufacturing workplace or simulated workplacetwo different heavy vehiclesheavy vehicle engineering and working drawingsVehicle Standards Bulletin 6 (VSB6) National Code of PracticeAustralian Design Rules (ADR) relevant to VSB6

2/06/2015 2:25 pm


Heavy Vehicle National Law (HVNL) regulationsoriginal equipment manufacturer (OEM) manuals and guidestools and equipment for checking heavy vehicle against standardsworkplace documentation relevant to applying heavy vehicle standards to heavy vehicle and recording results


automotive manufacturing workplace or simulated workplacefinished automotive manufactured components requiring quality inspectionstools, equipment and machinery required for the quality inspection processworkplace quality standards relating to the work to be quality inspectedworkplace procedures relating to conducting quality inspections of completed workworkplace documentation related to performing and recording quality inspections


automotive manufacturing workplace or simulated workplacework orders, working drawings and specificationstools, equipment and materials required in the drawing processworkplace procedures required to read and interpret work orders and working drawingswork instructions to read and interpret work orders and working drawings

AUMGTM005 Read and interpret engineering drawings and determine requirements

automotive manufacturing workplace or simulated workplaceengineering drawings and job specificationsequipment and material necessary to produce production work orders

AUMGTW001 Perform basic welding, thermal cutting, heating and gouging

manufacturing workplace or simulated workplacevehicle or components that require basic welding, thermal cutting, heating and gouging operationswork health and safety (WHS) equipment, including PPE relating to basic welding, thermal cutting, heating and gougingworkplace procedures, equipment and operating instructions relating to basic welding, thermal cutting, heating and gougingwelding consumables and materialswelding equipment and operating instructionswork sheets relating to basic welding, thermal cutting, heating and gouging operations

AUMGTW002 Conduct mechanical cutting

automotive workplace or simulated workplaceWHS equipment and PPE required for mechanical cutting operationsmechanical cutting operationsmechanical cutting equipmentmaterial for cuttingmarking and measuring equipment relevant to performing mechanical cuttingworking drawings and cutting specificationswork sheets relating to performing mechanical cutting operations

AURAFA2003 Communicate effectively in an automotive workplace


AUM40113 Certificate IV in Automotive Manufacturing



AUMAMM001 Influence and lead work groups in an automotive manufacturing workplace

automotive manufacturing workplace or simulated workplacework instructionsworkplace conflict-resolution, diversity and equal opportunity procedures that inform work involving influencing and leading automotivemanufacturing work groups

AUMFMM003 Plan and organise automotive production and assembly processes

automotive manufacturing workplace or simulated workplacecomponent or vehicle specificationsrepair tools and equipmentcomponents that require productionworkplace instruction relating to production and assembly processesworkplace quality procedures relating to production and assembly processesworkplace environmental guidelinesWHS requirements when planning and organising productionworkplace procedures to plan productionjob orders relating to production and assembly processes

MSS403041A Facilitate breakthrough improvements


2/06/2015 2:25 pm


AUM50113 Diploma of Automotive Manufacturing

There are no core units for this qualification.

2/06/2015 2:25 pm


Further InformationAUTO SKILLS AUSTRALIA

Email: [email protected]

Phone: (03) 8610 2500

Level 4, 533 Little Lonsdale StreetMELBOURNE VIC 3000

PO Box 13295Law Courts VIC 8010

Website: www.autoskillsaustralia.com.au

GENERAL

Australian Qualifications Framework: First edition, January 2013 www.aqf.edu.au/

National Skills Standards Council (NSSC) http://www.nssc.natese.gov.au/home

National Centre for Vocational Education Research (NCVER) http://www.ncver.edu.au/

TGA website, Training Packages, www.training.gov.au/

INDUSTRY ASSOCIATIONS

Australian Motor Industry Federation (AMIF)http://www.amif.com.au/

Federal Chamber of Automotive Industries (FCAI)http://www.fcai.com.au/

Motor Trades Association of the ACT (MTA ACT)http://www.mtaact.com.au/

Motor Traders' Association of NSW (MTA NSW)http://www.mtansw.com.au/

Motor Trades Association of the NT (MTA NT)http://www.mtant.com.au/

Motor Traders' Association of Queensland (MTA QLD) http://www.mtaq.com.au

Motor Trade Association of SA (MTA SA)http://www.mta-sa.asn.au/wcm/

Motor Trade Association of WA (MTA WA)http://www.mtawa.com.au/

Tasmanian Automobile Chamber of Commerce (TACC)http://www.tacc.net.au/

Victorian Automobile Chamber of Commerce (VACC)http://www.vacc.com.au/

TRAINEESHIPS AND APPRENTICESHIPS

The Australian Apprenticeships site (www.australianapprenticeships.gov.au) offers information about traineeships and apprenticeships and includes linksto state and territory authorities (STAs) that monitor provision.

Source URL: http://www.asacompanionvolumes.com.au/content/aum-implementation-guide

mailto:[email protected]

http://www.autoskillsaustralia.com.au/

http://www.aqf.edu.au/

http://www.nssc.natese.gov.au/home

http://www.ncver.edu.au/

http://www.training.gov.au/

http://www.amif.com.au/

http://www.fcai.com.au/

http://www.mtaact.com.au/

http://www.mtansw.com.au/

http://www.mtant.com.au/

http://www.mtaq.com.au/

http://www.mta-sa.asn.au/wcm/

http://www.mtawa.com.au/

http://www.tacc.net.au/

http://www.vacc.com.au/

http://www.australianapprenticeships.gov.au/

http://www.asacompanionvolumes.com.au/content/aum-implementation-guide