Informace o novinkách Husqvarna Construction prezentovaných na výstavě Bauma 2010 v Mnichově
2.
- New handheld concept for drilling both wet or dry
- A unique electronic level provides fast and accurate drill
positioning
- Maximum bit diameter - 80 mm handheld /150 mm stand
mounted
- Drilling speed is optimized by a three speed gearbox
Dealer net: ~ 800 Availability: ~ August 2010 New Handheld DM
220 3.
- Easily converts between wet or dry drilling using a
conventional water system or vacuum attachment
New Handheld DM 220 4.
- Operators can accurately position the DM 220 using a unique,
patent pending, electronic leveling system
- Easy to read LED display indicates perfect positioning in both
horizontal and vertical planes
- Multiple holes can be drilled at precisely the same angle by
programming the angle into the leveling system
New Handheld DM 220 5.
- Starting the drill is made easier with a new 2-speed
trigger:
-
- rpms are automatically lowered in the first position for better
control of the core bit
-
- Second position gives full rpm
-
- Soft Start provides smooth motor acceleration
New Handheld DM 220 6.
- The DM 220 easily mounts on theDS 250 and Gyro 50 drill stands
with our standard dovetail mounting system
- Easy to remove cover on the DM 220 exposes the quick connect
system for stand mounting
New Handheld DM 220 7. New HF drill motor DM 650 8.
- Versatile 2-in-1 drill motor allows the operator to choose
between single and three phase power with the same machine
- DM 650 with new PP 65 HF power pack provides unmatched
power
- Shaft output power - 3 kW with single phase / 6 kW with three
phase
- Easy to carry with a well-balanced ergonomic grip
- Recommended maximum 600 mm drill bits
- Optimized drilling with18-speeds available2 mechanical gears 9
electronic speeds
Dealer net: ~ 3500 incl PP Availability: ~ Q4 2010 New HF drill
motor DM 650 9.
-
- Load indicator lights guide operator to optimum drilling
efficiency
-
- Digital Speed indication from 1-9
-
- Elgard overload protection indicator
-
- A special boost button reduces rpms while maintaininghigh power
and torque
New HF drill motor DM 650 10.
- Powerful, light weight, air-cooled, high frequency power
pack
- Adapts to either 1- or 3-phase power supply
- Output power3 kW with 1-phase input6 kW with 3-phase input
- Designed to power the DM 650and future Husqvarna products
New Power Pack PP 65 HF 11.
-
- Vital information is shown on a 3,5 colored display
-
- Service information and maintenance indicators can be
viewed
-
- Operating parameters can be easily monitored or changed
- Advanced maintenence anddiagnostics can be done quicklythrough
a convenient USBinterface
New Power Pack PP 65 HF 12.
- Efficient fully automatic system at a reasonable price the
drilling market will never be the same
Automatic Drilling - AD 10 Dealer net: ~ 800 Availability: ~
September 2010 13.
- Plug-n-Play system is fast and easy
- No more hand cranking for the operator
- The operator has more freedom duringdrilling to perform other
activities
- Drilling speed, accuracy and lifetime of thediamond tool is
automatically optimized
- Productivity is greatly increased with afast, 3,2 m/s return
speed
- Variable speed control from 0-3,2 m/s
Automatic Drilling AD 10 14.
- Easily attached mounting ring fits to either side of the DS 450
drill stand allowing use of either the AD 10 or standard cranking
handle
- AD 10 mounts in seconds and can be positioned at any angle
Automatic Drilling AD 10 15.
- One, easy to use dial controls both speed and direction
- Drilling performance is automatically optimized for the
specific Husqvarna drill motor being used
- AD 10 senses when you drill through the material and
automaticaly stops
- Quick return speed allows you to start the next drilling job
faster and with less effort
Automatic Drilling AD 10 16.
- Automatically detects which Husqvarna machine is connected and
optimizes speed and load for ultimate drilling performance
Automatic Drilling AD 10 17.
- Husqvarna operators owning our WS 440 HF or WS 482 HF electric
wall saws can now easily add wire sawing capabilities with a lower
initial investment
New Wire Saw - CS 10 18.
- Unique, added versatility in combination with our electric wall
saws
- A cost-efficient solution for customers
- High versatility and multiple set-up options open up a wide
window of applications
- Added value to WS 440/482 systems will help increase wall saw
sales
- Uses wire lengths from 1,7 m to 11,7 m
- Output power: 13/19 kW (WS 440/482 HF)
New Wire Saw CS 10 19.
- Max/min wire in the saw: 11,7 m / 1,7 m
- Output power: 13/19 kW (WS 440/482 HF)
New Wire Saw CS 10 20.
- The machine is completely symmetrical allowing it to be used in
all positions and reaching even the tightest spots.
New Wire Saw CS 10 21. DXR 140 Compact, Agile and the strongest
in its class List price: ~ 70.000 Availability: ~ End May 2010 22.
New demolition robot - DXR 140
- More powerful than any other machine in its class
- 960 kilos, available with 11 kW or 15 kW output
- 360 degrees of rotation, based on a hydraulic/electrical swivel
technique
- Outstanding reach of 3.7 m
- Maximum pressure of 250 Bar and flow of 52 l/min
- The 11 kW version allows operation on 16 amp fuse(with some
limitations)
- Compact and agile a width of only 77 cm fits through narrow
doors and can be transported up and down stairs
23.
- Individually controlled out-riggers provide good stability,
even when working close to a wall and on uneven surfaces
- Easy to manoeuvre with the intuitive remote control, based on
Bluetooth technology
- Good view for the operator a low machine profile does not block
the line of sight
- Stronger working lights with a new generation of LED
spotlights
- Rugged design and well protected from falling overhead debris
and sharp objects from the sides
New demolition robot DXR 140 24. New demolition robot - DXR 140
Extremely compact for easy access Long reach, great stability 94 cm
77 cm 161 cm 360 121 cm 25. New demolition robot - DXR 140 26. A
new range of power cutters K 760 K 1260 K 970 27. New Active Air
Filtration System
- The air filter will last up to one year under normal cutting
conditions.
- Maintenance is further simplified by the elimination of the
separate oiled foam filter.
28. Air Purge for easier starting *
- Now its even easier to start a power cutter .
- Air purge system reduces the number of pulls needed to start
the saw by removing air from the carburetor and fuel line
* K 760 and K 970 29. DuraStarter
- The virtually maintenance-free starting mechanism made famous
by previous models is retained on the new saw generation
30. X-torq * - More power, less emissions
- 75% reduction of emissions, and 20% reduction in fuel
consumption!
- This is how much petrol you save in one year!
* K 760 and K 970 31. DEX Dust Extinguishing System
- Husqvarnas DEX-system improves your working environment, as
well as reduces the clean-up time once the job is finished.
- Water consumption is reduced by 50%
32. Poly-V Belt
- Provides the most efficient transfer of power to the
blade-shaft
- Less need for re-tensioning
- Longer belt life reduces maintenance cost andgreatly extends
the machines service life
33. Everything that was great with the K 750 has been made even
better with the new K 760! 34. Husqvarna K 760
- Up to one year of normal use before having to change the
filter,thanks to a new generation Active Air Filtration system
- Easier to start due to the new Air purge
- Dual Charge is now X-Torq, with the same low-emissions and fuel
efficiency
- SmartCarb has been further improved for even
betterstartability, acceleration and throttle response
- The new Husqvarna design clearly shows that this is a new
product with a more modern image
- More durable and serviceable due to a new crankcase and
footrest design
35. Summary USPs Air purge, for easierstarting New Active Air
filtrationsystem where the filterlasts up to a whole year New crank
case and ground support DEX water system reduces the
waterconsumption Poly-V belt for long life and best possible power
transmission Best-in-classanti-vibration Virtuallymaintenance-free
DuraStarter Water flow adjustment during cutting SmartCarb Fuel
level indicator Easily adjustable bladeguard with the choke which
now lets the machine run for 5-10 seconds Multi-tool withintegrated
holder Decompressionvalve for easierstarting The kill-switch
automatically returns to the starting position Husqvarna K 760 36.
The new Husqvarna K 970 37.
- Up to one year before having to change the filter, under normal
conditions, thanks to a new generation Active Air Filtration
system
- Dual Charge is now X-Torq, with the same low-emissions and fuel
efficiency
- Easier to start due to the new Air purge
- SmartCarb has been further improved for betterstartability, and
improved filter compensation
- The new Husqvarna design clearly shows that this is a new
product with a more modern image
- Improved ergonomics with the new rear handle
Husqvarna K 970 38. New design The K 970 features a newly
designed starter housing and top cover. New rear handle with soft,
molded grip improves the ergonomics even further. Inside, the
well-proven and virtually maintenance free DuraStarter with
outstanding durability is kept from the K 960. Husqvarna K 970 39.
Summary USPs New Active Air filtrationsystem where thefilter under
normalconditions lasts up toone year DEX water system reduces the
waterconsumption Poly-V belt for long life and best possible power
transmission Best-in-classanti-vibration Virtuallymaintenance-free
DuraStarter Water flow adjustment during cutting SmartCarb Fuel
level indicator Easily adjustable bladeguard Multi-tool
withintegrated holder Decompressionvalve for easierstarting The
kill-switch automatically returns to the starting position Purge
for easier starting Husqvarna K 970 40. The new Husqvarna K 1260
41.
- One year of normal use before having to change the
filter,thanks to a new generation Active Air Filtration system
- Vibrations are further reduced by an improved anti-vibration
system design
- A new and sturdier front ground support resists breakage
- The new Husqvarna design clearly shows that this is a new
product with a more modern image
Husqvarna K 1260 42. New design The K 1260 features a newly
designed top cover to denote the new modern generation of Husqvarna
power cutters.A smooth rounded shape makes it easy and comfortable
to hold the machine close to your body in the optimum position
while working Husqvarna K 1260 43. Summary USPs DEX water system
reduces the waterconsumption Poly-V belt for long life and best
possible power transmission Best-in-classanti-vibration Water flow
adjustment during cutting SmartCarb Easily adjustable bladeguard
Multi-tool withintegrated holder Decompressionvalve for
easierstarting The kill-switch automatically returns to the
starting position New Active Airfiltration for pro- longed
maintenance Husqvarna K 1260 44. The new HusqvarnaK 760 Cut-n-Break
Cleaner,smoother, and more powerful! 45.
- New K 760 engine provides more power than previous K650
C-n-B
- One year of normal use before having to change the
filter,thanks to a new generation Active Air Filtration system
- Easier to start due to the new Air purge
- X-Torq reduces the emissions and increases fuel efficiency
- SmartCarb provides better startability, acceleration and
throttle response
- The new Husqvarna design clearly shows that this is a new
product with a more modern image
- More durable and serviceable due to a new crankcase and
footrest
Husqvarna K 760 C-n-B 46. K 650 C-n-B K 760 C-n-B 47. New
blades, EL 10CnB and EL 35CnB The core of the blades is now
hardened and totally redesigned to increase the safety margin. The
new core design also strengthens the blade itself, producing better
performance in the cut. TheEL 10is intended for harder materials,
and is supplied as standard equipment with theK 3000 C-n-B TheEL
35is intended for all other materials, and is supplied as standard
equipment with theK 760 C-n-B AnEL 70blade will also be available
for soft materials and increased lifetime. Husqvarna K 760 C-n-B
48. Summary Air purge, for easierstarting New Active Air
filtrationsystem where the filterlasts a whole year New crank
caseand ground support New blades with stiffer core Improved
silencerwhich reduces the noise levels Significantly reduced
vibrations Virtuallymaintenance-free DuraStarter Easily adjusted
water flow X-Torq and SmartCarbreduces emissions by 70% andfuel
consumption by 20% Fuel level indicator 400mmcutting depth with the
choke which now lets the machine run for 5-10 seconds More power
withthe new K 760 engine Easier adjustment of the belt tension
Thicker grip Multi-tool withintegrated holder Decompressionvalve
for easierstarting The kill-switch automatically returns to the
starting position Husqvarna K 760 C-n-B 49. Diagrip High Speed
Blades
- 20-30% Higher cutting speed
- Smooth and stable cutting without vibrations
- Diagrip matrix distribution of diamonds increases efficiency
and life
- Diagrip matrix distribution
- assures maximum utilization of diamonds
- Easy, trouble-free cutting even in heavily reinforced
concrete.
For handheld power cutters and small floor saws 50. High Cutting
Capacity Also In Harder Materials
- Diagrip matrix distribution.
- Designed for optimum performance with handheld power
cutters.
- Three-in-one segment design provides highest cutting speed due
to efficient cooling of the segments
- Specially designed segment top reduces surface contact of a new
blade giving a smoother start and a great initial impression
- Easy-fit bushing allows for arbor hole expansion.
Husqvarna S 1235Diagrip 51. Cuts All Standard Construction
Materials
- Diagrip matrix distribution.
- Two-in-one segment design improves cooling and slurry removal,
improving both speed and life.
- Specially designed segment top reduces surface contact of a new
blade giving a smoother start and a great initial impression .
- Cuts all normal and abrasive construction materials, including
intermittent steel.
Husqvarna S 1265Diagrip 52. Asphalt Diamond Blade
- Diagrip matrix distribution.
- Kite profile reduces surface
- contact of a new blade, for
- Special segments added for
- protection against undercutting.
- Easy-fit bushing for arbor
- hole expansion, up to 400 mm
Husqvarna S 1285Diagrip