Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
CD 210 / CG 210 1/68 RE 17 017/05.03
© 2003by Bosch Rexroth AG, Industrial Hydraulics, D-97813 Lohr am Main
All rights reserved. No part of this document may be reproduced or stored, processed, duplicated or circulated usingelectronic systems, in any form or by means, without the prior written authorisation of Bosch Rexroth AG. In the eventof contravention of the above provisions, the contravening party is obliged to pay compensation.
Overview of contents
Contents PageDescription 2Explanations 3Connection positions 3Mounting styles (overview) 4Ordering details 5
Cylinder dataPiston Ø 40 6 to 11Piston Ø 50 12 to 17Piston Ø 63 18 to 23Piston Ø 80 24 to 29Piston Ø 100 30 to 35Piston Ø 125 36 to 41Piston Ø 150 42 to 47Piston Ø 180 48 to 53Piston Ø 200 54 to 59Forces, areas 60Weight 61Permissible stroke lengths 62, 63Buckling calculation 64Stop tube extensions 64Inductive proximity switches 65Installation lengths and positional tolerances 66Seals 66End position cushioning 67Calculation of deceleration forces 67Spare parts diagram 68
RE 17 017/05.03Replaces: 08.99
Hydraulic cylindersTypes CD 210 / CG 210
Series 1XNominal pressure:210 bar (21 MPa)
Type CD 210 D../…
K 46
39-5
Features
– Easily serviced modular system, head and base are fixed using thetie rod principle
– Operating pressure up to a max. of 210 bar
– 16 mounting styles
– Piston Ø: 40 to 200 mm
– Piston rod Ø: 16 to 140 mm
Note:When selecting the cylinder type, please takenote of the explanations on page 3!
RE 17 017/05.03 2/68 CD 210 / CG 210
Technical data (for applications outside these parameters, please consult us!)
Operating pressure 1) Up to 210 bar (dependent on piston Ø and mounting style)
Static test pressure Permissble operating pressure x 1.3 (dependent on piston Ø andmounting style)
Installation Optional
Pressure fluid Mineral oil to DIN 51 524 (HL, HLP)Phosphate ester (HFD-R)
Pressure fluid temperature range °C – 20 to + 70
Viscosity range mm2/s 2.8 to 380
Cleanliness class to ISO Maximum permissible degree of contamination of the pressurefluid is to ISO 4406 (C) class 20/18/15
Stroke velocity m/s 0.5 (dependent on connection size)
For permissible installation and Stroke lengths Permissible deviationpositional tolerances, see page 66 in mm
0 to 1250 + 1– 1.5
1251 to 2000 + 1– 2
2001 to 3000 + 1– 3
Description
The basis for this range is an easily serviced modular system.– The cylinder head and base are fixed to the cylinder tube by means of tie rods.
Therefore simple assembly and dis-assembly for servicing.
– The pipe threads are available optionally in ISO 228/1 or metric ISO thread forms.
– Bleed points (standard)
– Adjustable end position cushioning
– Installation length identical for models with or without end position cushioning.
– The stroke is freely selectable within the maximum available range.
1) The specified operating pressures are only valid for applications with shock-free operation.If extreme loads occur, e.g. as happens in high sequence cycles, the fixings andpiston rod thread connections need to be designed for durability (fatigue strength).
Cylinders that lie outside the above stated parameters are also available if required.Please enquire, giving exact details of the application.
CD 210 / CG 210 3/68 RE 17 017/05.03
1 Selectable position of the connections (see below).
12 Check valve and bleed point. The bleed point is standard.
13 Adjustable throttle valve for end position cushioning.
14 Threads B and C. Threads E and F together with the associatedtrunnion head are always on the last side of each piston Østated.
15 Take note of the permissible loading for screwed on self-aligning clevis.
16 Associated pin Ø, tolerance m6. minimum pin materialstrength σ0,2= 600 N/mm2 (the pin is not included within thescope of supply).
17 Pins and split pins are included within the scope ofsupply.
Explanations (item no. explanation for pages 6 to 59)
20 Grease nipple, cone head form A to DIN 71 412. As alubricant commercially available, corrosion preventative,lithium based greases can be used.
21 Re-lubrication possible via lubrication bore in housing.
22 The counter face Ø D1 at base is not suitable for enlargedconnection threads, 13 and 14, for O-ring fittings.
23 In models with inlarged port threads 13 and 14, the distancebetween the ports is changed.
24 In double rod cylinder type CG, the max. loading on side “Y” is13 kN.
By rotating the cylinder base and/or the cylinder head, the positionof the connections can be changed during assembly for most typesof cylinder mounting styles. The options can be seen in the tablebelow.
Position of connections
The throttle and check valves change their positions accordingly.
With mounting styles F, L, N and T as well as the cylinder base withmounting style G, the throttle and check valve are in position 1 whenthe port position is rotated.
Selectable position of connections
Mounting styles B C D E F G H K L M N P Q R S T1 1 1 1 1 1 1 1 1 – 1 1 1 1 1 1
At cylinder head 2 2 2 2 2 2 2 2 2 – 2 2 2 – 2 2
3 3 3 3 – 3 3 3 – 3 – 3 3 3 3 –
4 4 4 4 4 4 4 4 4 – 4 4 4 – 4 4
1 1 1 1 1 1 1 1 1 – 1 1 1 1 1 1
At cylinder base 2 2 2 2 2 2 2 2 2 – 2 2 2 2 – 2
3 3 3 3 – 3 3 3 – 3 – 3 3 3 3 –
4 4 4 4 4 4 4 4 4 – 4 4 4 4 – 4
= Positions 2 and 4 are not possible with:Piston Ø 40 with enlarged connection threads 13 and 14
= Positions 2 and 4 are not possible with piston Ø 40; 50 and 63
1
3
4 2
RE 17 017/05.03 4/68 CD 210 / CG 210
Mounting styles
Trunnion mountingat cylinder base
S
Foot mounting
F
Clevis for atcylinder base
G
Rectangular flangeat cylinder base
C
Foot mountingwith key
L
Foot mounting withO-ring seals for
subplate mounting
M
Square flangeat cylinder base
H
Rectangular flangeat cylinder base
D
Threaded holes incylinder head
and base
N
Foot mountingfront face with
key
T
Square flangeat cylinder base
K
Trunnion mountingat cylinder head
R
Extended tie rodat cylinder head
P
Extended tie rodat cylinder base
Q
Centre trunnionmounting
E
Swivel clevis atcylinder base
B
CD 210 / CG 210 5/68 RE 17 017/05.03
Ordering details
Further4) details
in clear text
Stop tubeextension
State
SealsA = Standard
versionT = Low friction
version
Port connection atcylinder base
Enter position of portsTable on pg. 3 to be taken into account
Port connection at cylinder headEnter position of ports
Table on pg. 3 to be taken into account
M = Seals, suitable for mineral oil toDIN 51 524 (HL, HLP)
V = (FKM) seals, suitable forphosphate ester (HFD-R)
End position cushioningU = WithoutK = (viewed "Y") Base endS = (viewed "X") Head endD = Both ends
Piston rod endB = External threadsC = External threadsE = Internal threadsF = Threads for self-aligning clevisT = 1) With self-aligning clevis CGK mountedL = 2) With self-aligning clevis CGA mountedM= 2) With self-aligning clevis CGAK mounted
Piston rod versionH = Hardened and hard chrome plated
for piston rod Ø ≤ 100 mmC = Hard chome plated, for piston rod Ø ≥ 80 mm
210 Z 1X
The portconnection sizes
are associatedwith the piston Ø.
1) Only possible with Ø40/16 to 180/802) Only possible with Ø180/90 to 200/1403) Not possible for piston Ø 2004) When fitting inductive proximity switches, the details
must always be stated in clear text on the order.
00 = Flange connection with O-ringseals; only possible for
mounting style "M"01 = Pipe threads to ISO 228/102 = Metric ISO threads13 = 3) Enlarged port connections with
pipe threads to ISO 228/114 = 3) Enlarged port connections with
metric ISO thread
Ordering example: CD 210 B50/22 - 200Z1X/01HBDM1-1A
*
Port connections
When ordering special versions, an "X" is entered at the relevant point in the ordering details and an SO added at the end of the code.
Single rodcylinder = CDDouble rodcylinder = CG
Series = 210For mounting styles,see page 4
Piston Piston Area Orderingrod ratio details
Ø Ø ϕ16 1.2:1 = 40/ 1618 1.25:1 = 40/ 1825 1.6:1 = 40/ 2522 1.25:1 = 50/ 2225 1.35:1 = 50/ 2536 2:1 = 50/ 3625 1.2:1 = 63/ 2528 1.25:1 = 63/ 2836 1.4:1 = 63/ 3645 2:1 = 63/ 4536 1.25:1 = 80/ 3645 1.4:1 = 80/ 4556 2:1 = 80/ 5645 1.25:1 =100/ 4550 1.35:1 =100/ 5070 2:1 =100/ 7050 1.2:1 =125/ 5056 1.25:1 =125/ 5663 1.35:1 =125/ 6390 2:1 =125/ 9063 1.2:1 =150/ 6370 1.25:1 =150/ 7080 1.4:1 =150/ 80
100 1.8:1 =150/10080 1.25:1 =180/ 8090 1.35:1 =180/ 90
125 2:1 =180/12590 1.25:1 =200/ 90
100 1.35:1 =200/100140 2:1 =200/140
Stroke length750 mm = 750(enter stroke length in mm)
Series = 1X(11 to 19: unchanged installation and connection dimensions)
40
50
63
100
80
150
180
200
125
RE 17 017/05.03 6/68 CD 210 / CG 210
A
A
SW1ø
46
A-A
401038
17,5EED1; 0,5
34,5WH
4510
A
øK
K
8
63
7,5
63 2ø15 10
8°8°
12– 0,12
R 30
B3
A-A
R16
A
A
15
ø 12,75644
20 +0,5
WH 21
42
63+1,4
63+1
,4
H7f7
øR
D
„X”„Y”
10
VD
10
WH
M10
6387,5110
11
41,5
63
17,5
38
„Y”
MA = 40 Nm
Piston Ø 40 (dimensions in mm – for item no. explanation, see page 3)
Mounting style BOperating pressure 210 bar
Mounting style G
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1416 M10 x 1.5 M12 x 1.5 M14 19 35
18 M10 x 1.5 M12 x 1.5 M14 19 35 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4225 M20 x 1.5 M22 x 1.5 M20 x 1.5 28 45
Mounting style COperating pressure for rod Ø 16 and Ø 18: 180 bar at base end, 210 bar rod end
Operating pressure for rod Ø 25: 110 bar at base end, 210 bar rod end
Strokemin = 25 mm for thread type "E" (only for CG cylinders)
Max. load 13 kN
1, 22, 23
XN + stroke
13 12 1614, 15 20
14, 15 1
XC + stroke
13 12 17
1, 22, 2314, 15
ZJ + Hub
1213
WH+stroke
ZM + 2xstroke
24
1A/F
CD 210 / CG 210 7/68 RE 17 017/05.03
øR
D
110
87,5
63 41,5
11
WH
10
VD
41,563
87,5110
„X”„Y”„Y”
10
11087,5
63
63 41,5
11WH
11087,563
41,5
110
87,5
63 41,5
11
WH
10
Piston Cushioning lengthrod RDf7 VD WH XC XN ZF ZJ ZM B3 1A/F Piston RodØ side end
16 28,5 6 16 162 193 153 143 176 5 13
18 32 6 16 162 193 153 143 176 5 14 30 3025 38 13 25 171 202 162 152 194 7 22
Piston Ø 40 (dimensions in mm – for item no. explanation, see page 3)
Mounting style HOperating pressure 210 bar
Mounting style D
Operating pressure 210 bar
Mounting style K
Operating pressure 210 bar
14, 15
Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
ZJ + stroke
ZM + 2xstroke
1, 22, 23 13 12 24
WH+stroke
14, 15 1, 22, 23 13
ZF + stroke
12
14, 15 1, 22, 23
ZF + stroke
13 12
RE 17 017/05.03 8/68 CD 210 / CG 210
10 258
XG2563,5 – 0,3
2
ø25
,4 –
0,0
3
R2
„X”„Y”
45B3
XGA
38
17,5VD34,5WH
EED1; 0,5
ø 4
6
øR
Dø
KK
SW1
„Y”
63 +1
,4ø
25,4
–0,
03
32
10
76 –0,3 2525
70 +1
,4
63
R2
M10 „X”„Y”
WH
„Y”
MA = 40 Nm
38
R2
2563,5 –0,325
63ø
25,4
– 0,
03
WH
Piston Ø 40 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style E
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1416 M10 x 1.5 M12 x 1.5 M14 19 35
18 M10 x 1.5 M12 x 1.5 M14 19 35 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4225 M20 x 1.5 M22 x 1.5 M20 x 1.5 28 45
Mounting style S
Operating pressure 210 bar
Max. load 13 kN
13 12Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
1, 22, 23
ZJ + stroke
14, 15
ZM + 2xstroke
WH+stroke
24
Strokemin = 10mm Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
1, 22, 23
XV + stroke/2ZJ + stroke
XV + stroke/2ZM + 2xstroke
WH+stroke
2414, 15
1, 22, 2314, 15
XJ + stroke
ZJ + stroke
1213
13 12
1A/F
CD 210 / CG 210 9/68 RE 17 017/05.03
5 –0
,2
31,7
h10
8 –0,07
WH
„X”„Y” „Y”
5 –0
,28 –0,07
WH
35,5ø 27
ø 1935,5
„X”„Y” „Y”
31,7
h10
31,7
h10ø18
ø11,519
WH
82,5102 +1,5
63
113
63 +1
,4
19
„X”„Y”
7,5
8 2
„Y”
Piston Ø 40 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Mounting style L
Operating pressure 210 bar
Mounting style MOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XG XJ XV ZJ ZM B3 1A/F Piston RodØ side end
16 28.5 6 16 48 124 88 143 176 5 13
18 32 6 16 48 124 88 143 176 5 14 30 3025 38 13 25 57 133 97 152 194 7 22
14, 15
Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
14, 15
Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
1, 22, 23
73 + strokeZJ + stroke
O-ring 22x2.5
ZJ + stroke
13 12
73 + stroke
ZM + 2xstroke
WH+stroke
24
13 12
WH+stroke
ZM + 2xstroke
24
13 1214, 15 1, 22, 23
ZJ + stroke98,5 + stroke 106 + stroke
ZM + 2xstroke
WH+stroke
24
RE 17 017/05.03 10/68 CD 210 / CG 210
„Y”
„Y”
ø11,5ø18ø11,5
22,58
9,5– 0,07 22 10
WH
– 0,
25 0,2-
0,4
31,5
–0,2 22 3
41,541,5
2263
M10
WH
M10
31,5
B2
63
–0,2
6318 35,5
„X”„Y”38
10AB3
1035,5
45
øK
K
SW1
øR
D
VD34,5
EED1; 0,5
17,5ø
46
28
7,5
„Y”
MA = 40 Nm
„X”
59
RD
„Y”
35
VDWH
M10
„Y”
Piston Ø 40 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style T
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1416 M10 x 1.5 M12 x 1.5 M14 19 35
18 M10 x 1.5 M12 x 1.5 M14 19 35 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4225 M20 x 1.5 M22 x 1.5 M20 x 1.5 28 45
Mounting style POperating pressure 210 bar
Max. load 13 kN
14, 15 1, 22, 23
73 + strokeZJ + stroke
171,5 + stroke
Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
13 12
14, 15 1, 22, 23 13 12 24
WH+stroke73 + stroke
ZM + 2xstroke
1, 22, 23
Strokemin = 25 mm for thread type "E"
(only for CG cylinders)
ZJ + stroke
1213
ZM + 2xstroke
WH+stroke
2414, 15
1A/F
CD 210 / CG 210 11/68 RE 17 017/05.03
M10
3510
WH
59
Self-aligning clevis CGK 15to suit thread type „F”
Material No.: R900001328
Weight: 0.16 kg
Permissible load: 18 kN
Self-aligning clevis CGK 20to suit thread type „F”
Material No.: R900001329
Weight: 0.34 kg
Permissible load: 30 kN
50˚
9˚9˚
SW32M20 x 1,5
30
ø20
1316-0,12
53
ø28ø34
2310
7710
4
A
Ø K
K
Ø K
K
A
B1
B4
50˚
8˚8˚
SW22M14
21
ø15
1012-0,12
41
ø22ø26
188
6181
Piston Cushioning lengthrod RDf7 B4 VD WH ZJ ZM B1 B2 B3 1A/F Piston RodØ side end
16 28.5 8 6 16 143 176 14 12 5 13
18 32 8 6 16 143 176 14 12 5 14 30 3025 38 9 13 25 152 194 15 12 7 22
Piston Ø 40 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Additional thread types
ZJ + stroke
1, 22, 2314, 15 13 12
16
16
Thread type „E”
Thread type „F”
Nut DIN 936
21
21
22A/F
32A/F
RE 17 017/05.03 12/68 CD 210 / CG 210
32,5+0,5
A-A
R24
A
A
27,5
ø19,1f7H7
7765
WH
42
21 76+1,4
76+1
,4
A
A
SW1ø
56
A-A
451538
17,5EED1; 0,5
40,5WH
4516
A
øK
K
8
76
10
76 2ø20 14
9°9°
16- 0,12
R 37
B3
øR
D
„X”„Y”
16
VD
12
WH MA = 70 Nm
M12
76105130
14
5276
38
17,5
Piston 50 (dimensions in mm – for item no. explanation, see page 3)
Mounting style B
Operating pressure 210 bar
Mounting style G
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1422 M16 x 1.5 M20 x 1.5 M20 x 1.5 28 45
25 M20 x 1.5 M22 x 1.5 M20 x 1.5 28 45 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4236 M26 x 1.5 M30 x 2 M24 x 2 41 55
Mounting style COperating pressure for rod Ø 22 and Ø 25: 180 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 36: 110 bar at base end, 210 bar at rod end
1314, 15
12131, 22, 2314, 15
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
XC + stroke
14, 15 1, 22, 23
12 171
XN + stroke
20 13 12 16
ZJ + stroke ZM + 2xstroke
WH+stroke
1A/F
CD 210 / CG 210 13/68 RE 17 017/05.03
øR
D
130
105
76 52
14
WH
16
VD
5276
105130
„X”„Y”
16
130105
76
76 52
14
WH
16
1301057652
130
105
76 52
14
WH
Piston Cushioning lengthrod RDf7 VD WH XC XN ZF ZJ ZM B3 1A/F Piston RodØ side end
22 38 6 19 184 212.5 168.5 152.5 194.5 8 19
25 38 7 19 184 212.5 168.5 152.5 194.5 8 22 30 3036 50 10 25.5 190.5 219 175 159 207.5 8 30
Piston Ø 50 (dimensions in mm – for item no. explanation, see page 3)
Mounting style HOperating pressure 210 bar
Mounting style D
Operating pressure 210 bar
Mounting style K
Operating pressure 210 bar
1, 22, 2314, 15
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
1, 22, 2314, 15
1, 22, 2314, 15
ZF + stroke
ZF + stroke
12
ZJ + stroke
1213
ZM + 2xstroke
WH+stroke
13 12
13
RE 17 017/05.03 14/68 CD 210 / CG 210
ø 3
4,93
38
12
89 3535 – 0,3
– 0,
03
85 76
R2MA = 70 Nm
M12 „X”„Y”
WH
16 35 – 0,38 XG3576
2
ø 3
4,93
76–
0,03
R2
„X”„Y”
45B3
XGA
38
17,5VD40,5WH
EED1; 0,5
ø 5
6
øR
Dø
KK
SW1
38
R2
35– 0,37635
76ø
34,
93–
0,03
WH
Piston Ø 50 (dimensions in mm – for item no. explanation, see page 3)
Mounting style R
Operating pressure 210 bar
Mounting style E
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1422 M16 x 1.5 M20 x 1.5 M20 x 1.5 28 45
25 M20 x 1.5 M22 x 1.5 M20 x 1.5 28 45 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4236 M26 x 1.5 M30 x 2 M24 x 2 41 55
Mounting style S
Operating pressure 210 bar
14, 15 1, 22, 23
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
1, 22, 2314, 15
ZM + 2xstroke
ZJ + stroke
1213
WH+stroke
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
Strokemin= 10mm
1, 22, 23
XV + stroke/2ZJ + stroke
13 12
WH+stroke
ZM + 2xstrokeXV + stroke/2
14, 15
XJ + stroke
ZJ + stroke
1213
1A/F
CD 210 / CG 210 15/68 RE 17 017/05.03
WH
41,5ø 27
ø 1941,5
„X”„Y”
38,1
h10
38,1
h10
WH
8 –0
,214 –0,07
„X”„Y”
8 –0
,2
14 –0,07
38,1
h10ø20
ø1428,5
WH
101,5125 +1,6
76
119
76 +1
,4
28,5
„X”„Y”
10
8 2
Piston Cushioning lengthrod RDf7 VD WH XG XJ XV ZJ ZM B3 1A/F Piston RodØ side end
22 38 6 19 57 133.5 97 152.5 194.5 8 19
25 38 7 19 57 133.5 97 152.5 194.5 8 22 30 3036 50 10 25.5 63.5 140 104 159 207.5 8 30
Piston Ø 50 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Mounting style L
Operating pressure 210 bar
Mounting styles MOperating pressure 210 bar
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 22, 23 12
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
1, 22, 23
92 + strokeZJ + stroke
13
99,5 + strokeZM + 2xstroke
WH+stroke
ZJ + stroke
1213
ZM + 2xstroke
WH+stroke
14, 15
WH+stroke
ZM + 2xstroke73.5 + strokeO-ring 22x2.5
73 + strokeZJ + stroke
1213
RE 17 017/05.03 16/68 CD 210 / CG 210
M12
WH MA = 70 Nm
M12
38
B2
76
– 0,
2
7624 41,5
„X”„Y”38
12AB3
1641,5
45
ø K
K
SW1
ø R
D
VD40,5
EED1; 0,5
17,5ø
56
28
10
„Y”
„Y”
ø 14ø 20ø 14
2414
13– 0,07 23,5 13,5
WH
– 0,
28 0,2-
0,4
38–0
,2 25 4,5
5252
2576
„X”74
RD
„Y”
45
VDWH
M12
Piston Ø 50 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style TOperating pressure 210 bar
Mounting style POperating pressure 210 bar
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
1, 22, 23
1, 22, 23
1, 22, 23
ZJ + stroke
73 + stroke
1213
ZM + 2xstroke
WH+stroke73,5 + stroke
181 + stroke
1213
13 12
ZM + 2xstroke
WH+stroke
ZJ + stroke
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1422 M16 x 1.5 M20 x 1.5 M20 x 1.5 28 45
25 M20 x 1.5 M22 x 1.5 M20 x 1.5 28 45 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4236 M26 x 1.5 M30 x 2 M24 x 2 41 55
1A/F
CD 210 / CG 210 17/68 RE 17 017/05.03
M12
4510
WH
74
50˚
9˚9˚
SW32M20 x 1,5
30
ø20
1316-0,12
53
ø28ø34
2310
7710
4
50˚
7˚7˚
20-0,12
17
ø25
36
M24 x 2SW36
64
27
126
9412
ø35ø42
A
Ø K
K
Ø K
K
A
B1
B4
Piston Ø 50 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Additional thread types
Thread type „E”
Thread type „F”
14, 15 13
ZJ + stroke
1, 22, 23 12
16
16 20
Nut DIN 936
21
Piston Cushioning lengthrod RDf7 B4 VD WH ZJ ZM B1 B2 B3 1A/F Piston RodØ side end
22 38 9 6 19 152.5 194.5 15 16 8 19
25 38 9 7 19 152.5 194.5 15 16 8 22 30 3036 50 10 10 25.5 159 207.5 19 12 8 30
Self-aligning clevis CGK 20to suit thread type „F”
Material No.: R900001329
Weight: 0.34 kg
Permissible load: 30 kN
Self-aligning clevis CGK 25to suit thread type „F”
Material No.: R900001330Weight: 0.6 kg
Permissible load: 42 kN
32A/F
36A/F
RE 17 017/05.03 18/68 CD 210 / CG 210
89 +1,5
A
A-A
R24
A27,5
ø 19,1 f7 7765
32,5 +0,5
WH
42
21
H7
89 +1
,5
A
A
SW1ø
73
A-A
551538
17,5EED1; 0,5
40,5WH
4516
A
øK
K
10
89
14
89 8ø 25 18
7°7°
20- 0,12
R 44
B3
øR
D
„X”„Y”
16
VD
12
WH MA = 80 Nm
M12
89117,5140
14
6589
38
17,5
Piston Ø 63 (dimensions in mm – for item no. explanation, see page 3 3)
Mounting style BOperating pressure 210 bar
Mounting style G
Operating pressure210 bar
Mounting style C
Operating pressure for rod Ø 25 and Ø 28: 180 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 36 and Ø 45: 110 bar at base end, 210 bar at rod end
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1425 M20 x 1.5 M22 x 1.5 M24 x 2 28 55
28 M20 x 1.5 M22 x 1.5 M24 x 2 28 55 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4236 M26 x 1.5 M30 x 2 M30 x 2 41 65
45 M33 x 2 M39 x 2 M30 x 2 50 65
2014, 15
13
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
1, 22, 23
1
1, 22, 23
12 17
XN + stroke
13 12 16
XC + stroke
14, 15
14, 15
ZJ + stroke
1213
WH+stroke
ZM + 2xstroke
1A/F
CD 210 / CG 210 19/68 RE 17 017/05.03
øR
D
140
117,
589 65
14
WH
16
VD
6589
117,5140
„X”„Y”
16
140117,5
89
89 65
14
WH
16
140117,5
8965
140
117,
589 65
14
WH
Piston Ø 63 (dimensions in mm – for item no. explanations, see page 3)
Mounting style HOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XC XN ZF ZJ ZM B3 1A/F Piston RodØ side end
25 38 6 19 187 225.5 171.5 155.5 197.5 8 22
28 42 6 19 187 225.5 171.5 155.5 197.5 8 22 30 3036 50.7 10 25.5 193.5 232 178 162 210.5 10 30
45 60 13 32 200 238,5 184.5 168.5 223.5 12 41
Mounting style D
Operating pressure 210 bar
Mounting style K
Operating pressure 210 bar
14, 15
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
1, 22, 23
ZF + stroke
1, 22, 23 13 12
ZF + stroke
1, 22, 23 13
ZJ + stroke
1213
ZM + 2xstroke
WH+stroke
12
RE 17 017/05.03 20/68 CD 210 / CG 210
16 35 – 0,3
10 XG3589
8
ø 3
4,93
89–
0,03
R2
„X”„Y”
45B3
XGA
38
17,5VD40,5WH
EED1; 0,5
ø 7
3
øR
Dø
KK
SW1
38
R2
35– 0,38935
89ø
34,
93–
0,03
WH
ø 3
4,93
– 0
,03
38
12
101,5 – 0,335
95 +1
,5
89
R2
MA = 80 Nm
M12 „X”„Y”
WH
35
Piston Ø 63 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style EOperating pressure 210 bar
Mounting style S
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1425 M20 x 1.5 M22 x 1.5 M24 x 2 28 55
28 M20 x 1.5 M22 x 1.5 M24 x 2 28 55 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4236 M26 x 1.5 M30 x 2 M30 x 2 41 65
45 M33 x 2 M39 x 2 M30 x 2 50 65
13 12
14, 15
14, 15
Strokemin = 10mm
1, 22, 23
XV + stroke/2ZM + 2xstroke
1, 22, 23
WH+stroke
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
ZM + 2xstroke
WH+stroke
ZJ + stroke 1213
14, 15 1, 22, 23
ZJ + strokeXV + stroke/2
XJ + strokeZJ + stroke
13 12
1A/F
CD 210 / CG 210 21/68 RE 17 017/05.03
44,4
h10
WH
41,5ø 27
ø 1941,5
„X”„Y”
44,4
h10
WH
8 –0
,2
14 –0,07
„X”„Y”
14 –0,078
–0,2
44,4
h10
ø33
ø2333,5
WH
124160 +1,6
89
125
89 +1
,533,5
„X”„Y”
14
10 8
Piston Ø 63 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XG XJ XV ZJ ZM B3 1A/F Piston RodØ side end
25 38 6 19 57 136.5 99 155.5 197.5 8 22
28 42 6 19 57 136.5 99 155.5 197.5 8 22 30 3036 50.7 10 25.5 3,5 143 105.5 162 210.5 10 30
45 60 13 32 70 149.5 112 168.5 223.5 12 41
Mounting style L
Operating pressure 210 bar
Mounting style M
Operating pressure 210 bar
14, 15
14, 15
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
1, 22, 23
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
ZJ + stroke ZM + 2xstroke
O-ring 22x2,576 + stroke
85.5 + strokeZJ + stroke
13 12
WH+stroke92.5+ stroke
ZM + 2xstroke
WH+stroke
13 121, 22, 2314, 15
13 12
WH+stroke
ZM + 2xstroke76,5 + stroke
ZJ + stroke
RE 17 017/05.03 22/68 CD 210 / CG 210
M16
WH MA = 80 Nm
M12
44,5
B2
89
– 0,
2
8932 41,5
„X”„Y”38
12AB3
1641,5
45
ø K
K
SW1
ø R
D
VD40,5
EED1; 0,5
17,5ø
73
810
14
„Y”
„Y”
ø 14ø 142414
13– 0,07 23,5 13,5
WH
– 0,
28 0,2-
0,4
44,5
– 0,
2
25
6565
2589
„X”91,5
RD
„Y”
45
VDWH
M12
Piston Ø 63 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style TOperating pressure 210 bar
Mounting style POperating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1425 M20 x 1.5 M22 x 1.5 M24 x 2 28 55
28 M20 x 1.5 M22 x 1.5 M24 x 2 28 55 G1/2 G3/4 M22 x 1.5 M27 x 2 34 42 34 4236 M26 x 1.5 M30 x 2 M30 x 2 41 65
45 M33 x 2 M39 x 2 M30 x 2 50 65
14, 15
14, 15
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
1, 22, 23
1, 22, 23
1, 22, 23
184 + stroke
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
ZJ + stroke76 + stroke
13 12
WH+stroke76,5 + stroke
ZM + 2xstroke
1213
ZJ + stroke
13 12
WH+stroke
ZM + 2xstroke
1A/F
CD 210 / CG 210 23/68 RE 17 017/05.03
50˚
7˚7˚
20-0,12
17ø
25
36
M24 x 2SW36
64
27
126
9412
ø35ø42
A
Ø K
K
Ø K
K
A
B1
B4
50˚
6˚6˚
22-0,12
19
ø30
45
M30 x 2SW41
73
30
147
110
15
ø42ø50
M12
4510
WH
91,5
Piston Ø 63 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Additional thread types
Thread type „E”
Thread type „F”
Piston Cushioning lengthrod RDf7 B4 VD WH ZJ ZM B1 B2 B3 1A/F Piston RodØ side end
25 38 10 6 19 155.5 197.5 19 20 8 22
28 42 10 6 19 155.5 197.5 19 20 8 22 30 3036 50.7 12 10 25.5 162 210.5 20 14 10 30
45 60 12 13 32 168.5 223.5 20 14 12 41
ZJ + stroke
14, 15
16
1, 22, 23
Nut DIN 936
2016
20
13 12
Self-aligning clevis CGK 25to suit thread type „F”
Material No.: R900001330
Weight: 0.6 kg
Permissible load: 42 kN
Self-aligning clevis CGK 30to suit thread type „F”
Material No.: R900001331Weight: 0.9 kg
Permissible load: 55 kN
36A/F
41A/F
RE 17 017/05.03 24/68 CD 210 / CG 210
A-A
R30
A
A
33
ø 25,43 H7f7 92
7739+0,5
WH
50
26,5 114 +1,5
114
+1,5
øR
D
„X”„Y”
19
VD
15
WH MA = 170 Nm
M16
114149180
18
82,5
114
45
21,5
R 57A
A
SW1ø
90
A-A
702045
21,5EE
D1; 0,546,5WH
5119
A
øK
K
10
114
18
114 8ø 35 23
6°6°
25– 0,18
B3
Piston Ø 80 (dimensions in mm – for item no. explanation, see page 3)
Mounting style BOperating pressure 210 bar
Mounting style G
Operating pressure 210 bar
Mounting style C
Operating pressure for rod Ø 36: 180 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 45 and Ø 56: 110 bar at base end, 210 bar at rod end
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1436 M26 x 1.5 M30 x 2 M30 x 2 41 65
45 M33 x 2 M39 x 2 M36 x 3 51 80 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4756 M39 x 2 M45 x 2 M39 x 3 57 90
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
1, 23
14, 15
1, 22, 23
14, 15
20
XC + stroke
17
1, 22, 23 13 12
ZJ + stroke
XN + stroke
WH+stroke
ZM + 2xstroke
13 12
13 12 16
1A/F
CD 210 / CG 210 25/68 RE 17 017/05.03
19
18014911482,5
180
149
114
82,5
18
WH
19
180149
114
114
82,5
18WH
øR
D
180
149
114
82,5
18
WH
19
VD
82,5114149180
„X”„Y”
Mounting style DOperating pressure 210 bar
Mounting style KOperating pressure 210 bar
Piston Ø 80 (dimensions in mm – for item no. explanation, see page 3)
Mounting style HOperating pressure 210 bar
Piston Cusioning lengthrod RDf7 VD WH XC XN ZF ZJ ZM B3 1A/F Piston RodØ side end
36 50 6 22 219 271 200 181 228 9 30
45 60 10 28.5 225.5 277.5 206.5 187.5 241 12 41 35 3556 70 10 32 229 281 210 191 248 15 46
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 22, 23
14, 15
14, 15
ZF + stroke
ZJ + stroke
ZF + stroke
1, 22, 23 13 12
1, 22, 23 13 12
1213
ZM + 2xstroke
WH+stroke
RE 17 017/05.03 26/68 CD 210 / CG 210
MA = 170 Nm
ø44
,45
–0,0
3
51
15
127 –0,3 4545
120
+1,5
114
R2
M16 „X”„Y”
WH
45
R2
45– 0,311445
114
ø 4
4,45
– 0,
03
WH
19 45 – 0,3
10
XG45114
8
ø 4
4,45
114
– 0,
03
R2
„X”„Y”
51B3
XGA
45
21,5VD46,5WH
EED1; 0,5
ø 9
0
øR
Dø
KK
SW1
Piston Ø 80 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style EOperating pressure 210 bar
Mounting style SOperating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1436 M26 x 1.5 M30 x 2 M30 x 2 41 65
45 M33 x 2 M39 x 2 M36 x 3 51 80 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4756 M39 x 2 M45 x 2 M39 x 3 57 90
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
1, 22, 23
1, 22, 23
XJ + strokeZJ + stroke
13 12
Strokemin = 20mm
XV + stroke/2ZJ + stroke
1213
WH+stroke
ZM + 2xstrokeXV + stroke/2
13 12Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 22, 23
ZJ + stroke
ZM + 2xstroke
WH+stroke
1A/F
CD 210 / CG 210 27/68 RE 17 017/05.03
WH
47,5ø 35
ø 2547,5
„X”„Y”
57,1
–h
1057
,1 h
10
18 –0,07
WH
9,5
–0,2
18 –0,07
„X”„Y”
9,5
–0,2
ø33
ø2336,5
WH
149185
57,1
– 0,
2
114
12511
4
36,5
„X”„Y”
18
10 8
Mounting style LOperating pressure 210 bar
Mounting style MOperating pressure 210 bar
Piston Ø 80 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XG XJ XV ZJ ZM B3 1A/F Piston RodØ side end
36 50 6 22 66.5 158.5 114 181 228 9 30
45 60 10 28.5 73 165 120.5 187.5 241 12 41 35 3556 70 10 32 76.5 168.5 124 191 248 15 46
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
1213
14, 15
14, 15 1, 22, 23
89 + strokeO-ring 29x3
ZJ + stroke
ZJ + stroke
ZJ + stroke105 + stroke
13 12
ZM + 2xstroke
111 + strokeWH+
stroke
WH+stroke
ZM + 2xstroke
1, 22, 2314, 15
13 12
WH+stroke
ZM + 2xstroke89 + stroke
RE 17 017/05.03 28/68 CD 210 / CG 210
„X”
117
RD
„Y”
58
VDWH
M16
ø17,5
„Y”
„Y”
ø17,528,5
1816,5
– 0,07 28,5 16,5
WH
– 0,
29,
5
0,2-
0,4
57–
0,2 32
82,582,5
32114
M20
WH MA = 170 Nm
M16 47,5
„X”„Y”45
15AB3
1947,5
51
ø K
K
SW1
ø R
D
VD46,5
EED1; 0,5
21,5ø
90
57
B2
114
– 0,
2
11438
810
18
Piston Ø 80 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style TOperating pressure 210 bar
Mounting style P
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1436 M26 x 1.5 M30 x 2 M30 x 2 41 65
45 M33 x 2 M39 x 2 M36 x 3 51 80 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4756 M39 x 2 M45 x 2 M39 x 3 57 90
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
Strokemin = 30 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15 13
14, 15
1, 22, 23
1, 22, 23 12
1, 22, 23
89 + strokeZJ + stroke
216 + stroke
ZJ + stroke ZM + 2xstroke
WH+stroke
89 + stroke
ZM + 2xstroke
WH+stroke
1213
13 12
1A/F
CD 210 / CG 210 29/68 RE 17 017/05.03
50˚
7˚7˚
28-0,12
23
ø40
65
M39 x 3SW55
92
44
190
142
18
ø52ø65
50˚
6˚6˚
22-0,12
19
ø30
45
M30 x 2SW41
73
30
147
110
15
ø42ø50
50˚
6˚6˚
25-0,12
21
ø35
60
M36 x 3SW50
82
42
166
125
15
ø47ø58
A
Ø K
K
Ø K
K
A
B1
B4
M16
5813
WH
117
Piston Ø 80 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 B4 VD WH ZJ ZM B1 B2 B3 1A/F Piston RodØ side end
36 50 12 6 22 181 228 20 20 9 30
45 60 14 10 28.5 187.5 241 20 15 12 41 35 3556 70 16 10 32 191 248 25 15 15 46
Additional thread types
Thread type „E”
Thread type „F”
14, 15
16
16
16
1, 22, 23 13 12
Nut DIN 936
ZJ + stroke
20
20
20
Self-aligning clevis CGK 30to suit thread type „F”
Material No.: R900001331Weight: 0.9 kg
Permissible load: 55 kN
Self-aligning clevis CGK 35to suit thread type „F”
Material No.: R900012486Weight: 1.4 kg
Permissble load: 73 kN
Self-aligning clevis CGK 40to suit thread type „F”
Material No.: R900001332
Weight: 2 kg
Permissible load: 90 kN
41A/F
50A/F
55A/F
RE 17 017/05.03 30/68 CD 210 / CG 210
A-A
R41,5
A
A
49
ø 34,95H7f7 118
10251,5 +0,5
WH
50
26,5 127 +1,6
127
+1,6
R 63A
A
SW1ø
115
A-A
802045
21,5EE
D1; 0,549,5WH
5122,5
A
øK
K
10
127
22
127 8ø 40 25
7°7°
28– 0,12
B3
MA = 195 Nm
øR
D
„X”„Y”
22
VD
15
WH
M16
127162195
18
97127
45
21,5
Piston Ø 100 (dimensions in mm – for item no. explanation, see page 3)
Mounting style BOperating pressure 210 bar
Mounting style G
Operating pressure 210 bar
Mounting style C
Operating pressure for rod Ø 45 and Ø 50: 180 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 70: 110 bar at base end, 210 bar at rod end
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1445 M33 x 2 M39 x 2 M42 x 3 51 90
50 M39 x 2 M45 x 2 M45 x 3 57 100 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4770 M48x 2 M56 x 2 M45 x 3 76 100
1, 23 17
14, 15
Strokemin = 55mm for thread type "E"
(only for CG cylinders)
XC + stroke
1, 22, 23
ZJ + stroke
13 12
WH+stroke
ZM + 2xstroke
121314, 15
14, 15
XN + stroke
1, 22, 23 20 13 12 16
1A/F
CD 210 / CG 210 31/68 RE 17 017/05.03
øR
D
195
162
127
97
18
WH
22
VD
97127162195
„X”„Y”
22
195162
127
127
97
18WH
22
19516212797
195
162
127
97
18
WH
Mounting style D
Operating pressure 210 bar
Piston Ø 100 (dimensions in mm – for item no. explanation, see page 3)
Mounting style HOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XC XN ZF ZJ ZM B3 1A/F Piston RodØ side end
45 60 6 25.5 248 294 216 194 247.5 12 41
50 66.6 6 28.5 251 297 219 197 253.5 15 46 35 3570 90 10 35 257.5 303.5 225.5 203.5 266.5 15 60
Mounting style K
Operating pressure 210 bar
14, 15
14, 15
14, 15
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
1, 22, 23
1, 22, 23
1, 22, 23
13 12
ZJ + stroke
WH+stroke
ZM + 2xstroke
13 12
ZF + stroke
ZF + stroke
1213
RE 17 017/05.03 32/68 CD 210 / CG 210
45
R2
45– 0,312745
127 ø
44,
45–
0,03
WH
MA = 195 Nm
ø44
,45
–0,0
3
51
15
139,5 –0,3 4545
127
R2
M16 „X”„Y”
WH
140
+1,6
22,5 45 – 0,3
10
XG45127
8
ø 4
4,45
127
– 0,
03
R2
„X”„Y”
51B3
XGA
45
21,5VD49,5WH
EED1; 0,5
ø 1
15
øR
Dø
KK
SW1
Piston Ø 100 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style EOperating pressure 210 bar
Mounting style S
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1445 M33 x 2 M39 x 2 M42 x 3 51 90
50 M39 x 2 M45 x 2 M45 x 3 57 100 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4770 M48x 2 M56 x 2 M45 x 3 76 100
13 12
13 12
13 12
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
14, 15
Strokemin = 20mm
1, 22, 23
1, 22, 23
1, 22, 23
XJ + strokeZJ + stroke
ZJ + strokeXV + stroke/2 ZM + 2xstroke
ZJ + stroke
WH+stroke
ZM + 2xstroke
XV + stroke/2WH+
stroke
1A/F
CD 210 / CG 210 33/68 RE 17 017/05.03
WH
47,5ø 3 5
ø 2547,5
„X”„Y”
63,5
h10
11 -0
,2
11 -0
,2
63,5
h10
22 –007
WH
220 –0,77
„X”„Y”
ø40
ø2744,5
WH
171,5215
63,5
– 0,
2
127
13212
7
44,5
„X”„Y”
22
10 8
Mounting style LOperating pressure 210 bar
Piston Ø 100 (dimensions in mm – for item no. explanations, see page 3)
Mounting style FOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XG XJ XV ZJ ZM B3 1A/F Piston RodØ side end
45 60 6 25.5 73 171.5 124 194 247.5 12 41
50 66.6 6 28.5 76 174.5 127 197 253.5 15 46 35 3570 90 10 35 82,5 181 133 203.5 266.5 15 60
Mounting style MOperating pressure 210 bar
13
1213
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
14, 15 1, 22, 23
1, 22, 23 12
ZJ + stroke ZM + 2xstroke
WH+stroke
O-Ring 29x3101,5 + stroke
ZJ + strokeZM + 2xstroke101,5 + stroke
WH+stroke
101,5 + strokeZJ + stroke
13 12
107,5 + strokeZM + 2xstroke
WH+stroke
RE 17 017/05.03 34/68 CD 210 / CG 210
„X”
137
RD
„Y”
58
VDWH
M16
ø17,5
„Y”
„Y”
ø17,528,522
16,5– 0,07 28,5 16,5
WH
– 0,
211 0,2-
0,4
63,5
– 0,
2 32
9797
32127
M24
WH MA = 195 Nm
M16
63,5
B2
127
– 0,
2
12752,5 50,5
„X”„Y”45
15AB3
22,550,5
51
ø K
K
SW1
ø R
D
VD49,5
EED1; 0,5
21,5ø
115
810
22
Piston Ø 100 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style TOperating pressure 210 bar
Mounting style P
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1445 M33 x 2 M39 x 2 M42 x 3 51 90
50 M39 x 2 M45 x 2 M45 x 3 57 100 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4770 M48x 2 M56 x 2 M45 x 3 76 100
13
13
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
Strokemin = 55 mm for thread type "E"
(only for CG cylinders)
14, 15
1214, 15
14, 15
1, 22, 23
1, 22, 23
1, 22, 23 12
ZJ + stroke ZM + 2xstroke
WH+stroke
225,5 + stroke
95,5 + stroke
13 12
95,5 + strokeZM + 2xstroke
WH+stroke
ZJ + stroke
1A/F
CD 210 / CG 210 35/68 RE 17 017/05.03
50˚
7˚7˚
32-0,12
27ø
45
65
M42 x 3SW60
102
48
199
145
20
ø58ø70
50˚
6˚6˚
35-0,12
30
ø50
68
M45 x 3SW65
112
58
221
160
20
ø62ø75
A
Ø K
K
Ø K
K
A
B1
B4
M16
5813
WH
137
Piston Ø 100 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 B4 VD WH ZJ ZM B1 B2 B3 1A/F Piston RodØ side end
45 60 16 6 25.5 194 247.5 25 25 12 41
50 66.6 18 6 28.5 197 253.5 32 25 15 46 35 3570 90 18 10 35 203.5 266.5 32 15 15 60
Self-aligning clevis CGK 45to suit thread type „F”
Material No.: R900001333
Weight: 2.7 kg
Permissible load: 120 kN
Self-aligning clevis CGK 50to suit thread type „F”
Material No.: R900001334Weight: 3.5 kg
Permissible load: 145 kN
Additional thread types
Thread type „E”
Thread type „F”
14, 15
16 20
16
1, 22, 23
Nut DIN 936
ZJ + stroke
13 12
20
60A/F
65A/F
RE 17 017/05.03 36/68 CD 210 / CG 210
65 +0,5
A-A
R54
A
A
52
ø 44,48H7f7 147
127
WH
50
26,5
165
+1,6
165 +1,6
R 82A
A
SW1ø
145
A-A
903045
21,5EE
D1; 0,549,5WH
5122,5
A
øK
K
10
165
25
165 8ø 45 30
7°7°
32– 0,12
B3
øR
D
„X”„Y”
22
VD
18
WH
M20
165208250
23
125,
516
5
45
21,5MA = 385 Nm
Piston Ø 125 (dimensions in mm – for item no. explanation, see page 3)
Mounting style BOperating pressure 210 bar
Mounting style GOperating pressure 210 bar
Mounting style COperating pressure for rod Ø 50 and Ø 56: 160 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 63 and Ø 90: 60 bar at base end, 210 bar at rod end
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1450 M39 x 2 M45 x 2 M45 x 3 57 100
56 M39 x 2 M45 x 2 M45 x 3 57 100 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4763 M48 x 2 M56 x 2 M52 x 3 76 115
90 M64 x 2 M76 x 2 M52 x 3 89 115
1, 22, 23
14, 15
14, 15 1, 23
14, 15
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
1, 22, 23 20
XC + stroke
13 12
XN + stroke
ZJ + stroke
17
13 12
ZM + 2xstroke
WH+stroke
1213 16
1A/F
CD 210 / CG 210 37/68 RE 17 017/05.03
øR
D
250
208
165
125,
5
23
WH
22
VD
125,5165208250
„X”„Y”
22
250208
165
165
125,
5
23
WH
22
250208165
125,5
250
208
165
125,
5
23
WH
Mounting style D
Operating pressure for rod Ø 50, 56 and Ø 63: 210 bar at base end, 150 bar at rod end
Operating pressure for rod Ø 90: 210 bar at base end, 210 bar at rod end
Piston Ø 125 (dimensions in mm – for item no. explanation, see page 3)
Mounting style HOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XC XN ZF ZJ ZM B3 1A/F Piston RodØ side end
50 66.6 6 28.5 266.5 329.5 231.5 209.5 266 14 46
56 70 7 28.5 266.5 329.5 231.5 209.5 266 14 46 33 3563 79.3 10 35 273 336 238 216 279 15 55
90 108 10 35 273 336 238 216 279 15 75
Mounting style K
Operating pressure 210 bar
12
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
14, 15
1, 22, 23
1, 22, 23 13
1, 22, 23
ZF + stroke
ZF + stroke
13 12
ZJ + stroke
ZM + 2xstroke
WH+stroke
13 12
RE 17 017/05.03 38/68 CD 210 / CG 210
22,5 45
10
XG45165 –0,3
8
ø 4
4,45
–0,
03
R2
„X”„Y”
51B3
XGA
45
21,5VD49,5WH
EED1; 0,5
ø 1
45
øR
Dø
KK
SW1
165
+1,6
45
R2
45– 0,316545
165 ø
44,
45–
0,03
WH
ø44
,45
–0,0
3
51
18
177,5 –03 4545
165
R2
M20 „X”„Y”
WH
MA = 385 Nm
195
+1,8
Piston Ø 125 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style EOperating pressure 210 bar
Mounting style S
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1450 M39 x 2 M45 x 2 M45 x 3 57 100
56 M39 x 2 M45 x 2 M45 x 3 57 100 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4763 M48 x 2 M56 x 2 M52 x 3 76 115
90 M64 x 2 M76 x 2 M52 x 3 89 115
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
12
1, 22, 23
1, 22, 23
XJ + stroke
13
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
Strokemin = 20mm
1, 22, 23
XV + stroke/2ZJ + stroke
13 12
ZM + 2xstrokeXV + stroke/2
WH+stroke
14, 15
ZJ + stroke
13 12
WH+stroke
ZM + 2xstroke
ZJ + stroke
1A/F
CD 210 / CG 210 39/68 RE 17 017/05.03
WH
50,5ø 35
ø 2550,5
„X”„Y”
82,5
h10
WH
11 –
0,2
22 –0,07
„X”„Y”
82,5
h10
22 –0,07
11 –
0,2
82,5
h10ø40
ø2744,5
WH
209,5255 +1,9
165
132165
+1,6
44,5
„X”„Y”
18
10 8
Mounting style L
Operating pressure 210 bar
Piston Ø 125 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 VD WH XG XJ XV ZJ ZM B3 1A/F Piston RodØ side end
50 66.6 6 28.5 76 187 133 209.5 266 14 46
56 70 7 28.5 76 187 133 209.5 266 14 46 33 3563 79.3 10 35 82.5 193.5 139.5 216 279 15 55
90 108 10 35 82.5 193.5 139.5 216 279 15 75
Mounting style M
Operating pressure 210 bar
14, 15
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
O-ring 29x3108 + strokeZJ + stroke
13 12
WH+stroke108 + stroke
ZM + 2xstroke
ZM + 2xstroke
WH+stroke
13 1214, 15 1, 22, 23
ZJ + stroke
Strokemin = 70 mm for thrread type "E"
(only for CG cylinders)
114,5 + stroke
ZJ + stroke
131, 22, 23
WH+stroke
ZM + 2xstroke120 + stroke
14, 15 12
RE 17 017/05.03 40/68 CD 210 / CG 210
M24
WH
M20
82,5
B2
165
– 0,
2
16574,5 50,5
„X”„Y”45
18AB3
22,550,5
51
ø K
K
SW1
ø R
D
VD49,5
EED1; 0,5
21,5ø
145
810
25
MA = 385 Nm
„X”
178
RD
„Y”
80
VDWH
M20
ø24
„Y”
„Y”
ø243822
19– 0,07 38 19
WH
– 0,
211 0,2-
0,4
82,5
– 0,
2 38
125,5125,5
38165
Piston Ø 125 (dimensions in mm – for item no. explanations, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style TOperating pressure 210 bar
Mounting style POperating pressure210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1450 M39 x 2 M45 x 2 M45 x 3 57 100
56 M39 x 2 M45 x 2 M45 x 3 57 100 G3/4 G1 M27 x 2 M33 x 2 42 47 42 4763 M48 x 2 M56 x 2 M52 x 3 76 115
90 M64 x 2 M76 x 2 M52 x 3 89 115
13
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
Strokemin = 70 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 22, 23
12
1, 22, 23
108 + strokeZJ + stroke
WH+stroke
1213
108 + strokeZM + 2xstroke
14, 15
ZJ + stroke ZM + 2xstroke
WH+stroke
13 12
257 + stroke
14, 15 1, 22, 23
1A/F
CD 210 / CG 210 41/68 RE 17 017/05.03
A
Ø K
K
Ø K
K
A
B1
B4
M20
8016
WH
178
50˚
6˚6˚
44-0,15
38
ø60
70
M52 x 3SW75
135
68
246
175
20
ø70ø88
50˚
6˚6˚
35-0,12
30
ø50
68
M45 x 3SW65
112
58
221
160
20
ø62ø75
Piston Ø 125 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 B4 VD WH ZJ ZM B1 B2 B3 1A/F Piston RodØ side end
50 66.6 18 6 28.5 209.5 266 32 40 14 46
50 70 18 7 28.5 209.5 266 32 40 14 46 33 3563 79.3 20 10 35 216 279 45 25 15 55
90 108 20 10 35 216 279 45 25 15 75
Self-aligning clevis CGK 50to suit thread type „F”
Material No.: R900001334
Weight: 3.5 kg
Permissible load: 145 kN
Self-aligning clevis CGK 60to suit thread type „F”
Material No.: R900001335
Weight: 5.6 kg
Permissible load: 225 kN
Addtional thread types
Thread type „E”
Thread type „F”
14, 15 1, 22, 23 13 12
Nut DIN 936
ZJ + stroke
16
16
20
20
65A/F
75A/F
RE 17 017/05.03 42/68 CD 210 / CG 210
A-A
R60
A
A
59
ø 50,83 H7f7 147
12765 +0,5
31,5
61
36 190 +1,8
190 +
1,8
øR
D
„X”„Y”
25
7
21
32 MA = 660 Nm
M24
190239,5285
27
145,
519
0
57
32
R 95A
A
SW1ø
170
A-A
1203057
32EE
D1; 0,55731,5
5725,5
A
øK
K
14
190
35
190 10ø 50 32
6°6°
35– 0,12
15
Piston Ø 150 (dimensions in mm – for item no. explanation, see page 3)
Mounting style BOperating pressure210 bar
Mounting style G
Operating pressure 210 bar
Mounting style C
Operating pressure for rod Ø 63 and Ø 70: 130 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 80 and Ø 100: 60 bar at base end, 210 bar at rod end
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1463 M48 x 2 M56 x 2 M52 x 3 76 115
70 M48 x 2 M56 x 2 M52 x 3 76 115 G1 G1 1/4 M33 x 2 M42 x 2 47 58 47 5880 M58 x 2 M68 x 2 M64 x 4 89 145
100 M76 x 2 M95 x 2 M64 x 4 101 145
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15 1, 23
308 + stroke
17
1, 23
245 + stroke
13 12
302 + 2xstroke
31,5+stroke
13 12
14, 15 1, 23 20
395 + stroke
13 12 16
1A/F
CD 210 / CG 210 43/68 RE 17 017/05.03
25
285239,5190
145,5
285
239,
519
014
5,5
27
31,5
øR
D
285
239,
519
014
5,5
27
32
25
7
145,5190
239,5285
„X”„Y”
25
285239,5
190
190
145,
5
27
31,5
14, 15 1, 23
270 + stroke
13 12
Piston Ø 150 (dimensions in mm – for item no. explanation, see page 3)
Mounting style D
Operating pressure for rod Ø 63 and Ø 70: 210 bar at base end, 150 bar at rod end
Operating pressure for rod Ø 80 and Ø 100: 210 bar at base end, 210 bar at rod end
Piston Cushioning lengthrod RDf7 1A/F Piston RodØ side end
63 79.3 55
70 90 60 38 3580 95.2 75
100 120 85
Mounting style HOperating pressure 210 bar
Mounting style K
Operating pressure 210 bar
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 23
14, 15 1, 23
270 + stroke
13 12
245 + stroke
13 12
302 + 2xstroke
31,5+stroke
RE 17 017/05.03 44/68 CD 210 / CG 210
57
R2
51– 0,3190,551
190 ø
50,
8–
0,03
31,5
ø50
,8 –
0,03
75
21
216 –0,3 5151
210
+1,8
190
R2
M24 „X”„Y”
31,5
MA = 660 Nm
25,5 51
14
85,551190,5 –0,3
10
Ø 5
0,8
–0,0
3
R2
„X”„Y”
5715
85,5A
57
3275731,5
EED1; 0,5
ø 1
70
øR
Dø
KK
SW1
190
+1,8
Piston Ø 150 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style E
Operating pressure 210 bar
Mounting style S
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1463 M48 x 2 M56 x 2 M52 x 3 76 115
70 M48 x 2 M56 x 2 M52 x 3 76 115 G1 G1 1/4 M33 x 2 M42 x 2 47 58 47 5880 M58 x 2 M68 x 2 M64 x 4 89 145
100 M76 x 2 M95 x 2 M64 x 4 101 145
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 23
14, 15 1, 23
13 12
213,5 + stroke245 + stroke
Strokemin = 20mm
1, 23
13 12
151 + stroke/2245 + stroke
151 + stroke/2302 + 2xstroke
31,5+stroke
14, 15
245 + stroke1213
302 + 2xstroke
31.5+stroke
1A/F
CD 210 / CG 210 45/68 RE 17 017/05.03
31,5
12,5
–0,
2
25 –0,07
„X”„Y”
95,2
h10
25 –0,0712
,5 –
0,2
95,2
h10
31,5
57,5ø 42
ø 3257,5
„X”„Y”
95,2
h10ø48
ø3354,5
31,5
247,5305 +1,9
190
138190
+1,8
54,5
„X”„Y”
35
14 10
Piston Ø 150 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Piston Cusioning lengthrod RDf7 1A/F Piston RodØ side end
63 79.3 55
70 90 60 38 3580 95.2 75
100 120 85
Mounting style LOperating pressure 210 bar
Mounting style M
Operating pressure 210 bar
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
13 12
14, 15
302 + 2xstroke
14, 15 13 12
O-ring 36x3130 + stroke
13 12
124 + stroke
302 + 2xstroke
31.5+stroke
31.5+stroke
245 + stroke
1, 2314, 15
1, 23
130 + stroke245 + stroke
130 + stroke302 + 2xstroke
31.5+stroke
245 + stroke
RE 17 017/05.03 46/68 CD 210 / CG 210
M30
31,5
M24
95
B2
190
– 0,
2
19084 57,5
„X”„Y”57
21A15
25,557,5
57
ø K
K
SW1
ø R
D
757
EED1; 0,5
32ø
170
1014
35
MA = 660 Nm
„X”
206
RD
„Y”
90
731,5
M24
ø27
„Y”
„Y”
ø2743
2522
– 0,07 43 22
31,5
– 0,
212
,5
0,2-
0,4
95–
0,2 44
145,5145,5
44190
Piston Ø 150 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style TOperating pressure 210 bar
Mounting style P
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1463 M48 x 2 M56 x 2 M52 x 3 76 115
70 M48 x 2 M56 x 2 M52 x 3 76 115 G1 G1 1/4 M33 x 2 M42 x 2 47 58 47 5880 M58 x 2 M68 x 2 M64 x 4 89 145
100 M76 x 2 M95 x 2 M64 x 4 101 145
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
Strokemin = 85 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 23
14, 15 1, 23
245 + stroke
13 12
302 + 2xstroke
31.5+stroke
298.5 + stroke
13 12
124 + stroke31.5+stroke
302 + 2xstroke
13 12
130 + stroke245 + stroke
14, 15 1, 23
1A/F
CD 210 / CG 210 47/68 RE 17 017/05.03
50˚
6˚6˚
44-0,15
38ø
60
70
M52 x 3SW75
135
68
246
175
20
ø70ø88
50˚
6˚6˚
55-0,15
47
ø80
85
M64 x 4SW100
180
91
324
230
25
ø95ø110
M24
9019
31,5
206
A
Ø K
K
Ø K
K
A
B1
B4
Piston Ø 150 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 B4 B1 B2 1A/F Piston RodØ side end
63 79.3 20 45 45 55
70 90 20 45 45 60 38 3580 95.2 51 60 30 75
100 120 51 60 30 85
Self-aligning clevis CGK 60to suit thread type „F”
Material No.: R900001335
Weight: 5.6 kg
Permissible load: 225 kN
Self-aligning clevis CGK 80to suit thread type „F”
Material No.: R900001928Weight: 13.1 kg
Permissible load: 371 kN
Addtional thread types
Thread type „E”
Thread type „F”
Nut DIN 936Nut M64 x 4 DIN 934
1314, 15 1, 23 12
16 20
2016
245 + stroke
75A/F
100A/F
RE 17 017/05.03 48/68 CD 210 / CG 210
A-A
R73
A
A
72
ø 63,53H7f7 176
15478 +0,5
31,5
74
44 216 +1,8
216
+1,8
R 107,5A
A
SW1ø
205
A-A
1404070
40EED1; 0,5
6531,5
7025,5
A
øK
K
14
216
45
216 10ø60
40
6°6°
44 – 0,15
15
øR
D
„X”„Y”
25,5
7
24
31,5
M27
216270320
30
167
216
70
40MA = 800 Nm
Piston Ø 180 (dimensions in mm – for item no. explanation, see page 3)
Mounting style BOperating pressure 210 bar
Mounting style GOperating pressure 210 bar
Mounting style COperating pressure for rod Ø 80 and Ø 90: 110 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 125: 60 bar at base end, 210 bar at rod end
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1480 M58 x 2 M68 x 2 M64 x 4 89 145
90 M64 x 2 M76 x 2 M80 x 2 89 80 G1 1/4 G1 1/2 M242 x 2 M48 x 2 58 65 58 65125 M90 x 2 M110 x 2 M100 x 2 127 100
14, 15
14, 15
14, 15 1, 23
1, 23
1, 23
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
273 + stroke
13 12
330 + 2xstroke
31.5+stroke
13 12 17
349 + stroke
453 + stroke
20 13 12 16
1A/F
CD 210 / CG 210 49/68 RE 17 017/05.03
25,5
320270216167
320
270
216
167
30
31,5
25,5
320270
216
216
167
30
31,5
øR
D
320
270
216
167
30
31,5
25,5
7
167216270320
„X”„Y”
Piston Ø 180 (dimensions in mm – for item no. explanations see page 3)
Mounting style HOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 1A/F Piston RodØ side side
80 95.2 75
90 108 75 50 50125 146 115
Mounting style DOperating pressure for rod Ø 80 and Ø 90: 210 bar at base end, 110 bar at rod end
Operating pressure for rod Ø 125: 210 bar at base end, 150 bar at rod end
Mounting style K
Operating pressure 210 bar
14, 15 1, 23
14, 15 1, 23
14, 15 1, 23
298.5 + stroke
298.5 + stroke
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
13 12
13 12
273 + stroke
330 + 2xstroke
31.5+stroke
1213
RE 17 017/05.03 50/68 CD 210 / CG 210
25,5 63
14 9263216 –0,3
10
ø 6
3,5
–0,0
3
216
+1,8
R2
„X”„Y”
7015
92A
70
4076531,5
EED1; 0,5
ø 2
05
øR
Dø
KK
SW1
70
R2
63– 0,321663
216 ø
63,
5–
0,03
31,5
ø63
,5 –
0.03
80
24
247,5 –0,3 6363
270
+1,9
216
R2
M27 „X”„Y”
31,5
MA = 800 Nm
1A/F
Piston Ø 180 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style EOperating pressure 210 bar
Mounting style S
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1480 M58 x 2 M68 x 2 M64 x 4 89 145
90 M64 x 2 M76 x 2 M80 x 2 89 80 G1 1/4 G1 1/2 M242 x 2 M48 x 2 58 65 58 65125 M90 x 2 M110 x 2 M100 x 2 127 100
14, 15 1, 23
14, 15 1, 23
Strokemin = 25mm
14, 15 1, 23
13 12
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
238 + stroke273 + stroke
165 + stroke/2273 + stroke
1213
165 + stroke/2330 + 2xstroke
31.5+stroke
330 + 2xstroke
31.5+stroke
13 12273 + stroke
CD 210 / CG 210 51/68 RE 17 017/05.03
31,5
65,5ø48
ø3865,5
„X”„Y”
108
h10
31,5
12,5
–0,
2
25 –0,07
„X”„Y”
108
h10
12,5
–0,
2
25 –0,07
108
h10ø60
ø4060,5
31,5
286
216
144
60,5
„X”„Y”
45
14 10
355 + 221
6 +1
,8
Piston Ø 180 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 1A/F Piston RodØ side side
80 95.2 75
90 108 75 50 50125 146 115
Mounting style L
Operating pressure 210 bar
Mounting style MOperating pressure 210 bar
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
14, 15
330 + 2xstroke
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
31.5+stroke
O-ring 42x3
149 + stroke
13 12
136 + stroke330 + 2xstroke
31.5+stroke
12131, 23
273 + stroke
1, 23 13
146 + stroke330 + 2xstroke
146 + stroke31.5+stroke
14, 15 12
14, 15
273 + stroke
273 + Hub
RE 17 017/05.03 52/68 CD 210 / CG 210
„X”
236
RD
„Y”
105
731,5
M27
ø30
„Y”
„Y”
ø3046
2524
– 0,07 46 24
31,5
– 0,
212
,5
0,2-
0,4
108
– 0,
2
50
167167
50216
M42
31,5
M27
108
B2
216
– 0,
2
21690 65,5
„X”„Y”70
24A15
25,565,5
70
øK
K
SW1
øR
D
765
EED1; 0,5
40ø
205
1014
45
MA = 800 Nm1A/F
Piston Ø 180 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style T
Operating pressure 210 bar
Mounting style P
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1480 M58 x 2 M68 x 2 M64 x 4 89 145
90 M64 x 2 M76 x 2 M80 x 2 89 80 G1 1/4 G1 1/2 M242 x 2 M48 x 2 58 65 58 65125 M90 x 2 M110 x 2 M100 x 2 127 100
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
14, 15 1, 23
14, 15 1, 23
14, 15
Strokemin = 105 mm for thread type "E"
(only for CG cylinders)
1, 23
13 12
273 + stroke 330 + 2xstroke
31.5+stroke
333.5 + stroke
13 12
149 + stroke273 + stroke
13 12
330 + 2xstroke136 + stroke
31.5+stroke
CD 210 / CG 210 53/68 RE 17 017/05.03
A
Ø K
K
Ø K
K
A
B1
B4
M27
10522
31,5
236
65-0,4
60
ø90
101
M100 x 2
143
9021
0R103
113
-0,2
6˚6˚
60-0,4
55
81
M80 x 2
125
8017
0
R88
95
-0,15
ø80
6˚6˚
50˚
6˚6˚
55-0,15
47
ø80
85
M64 x 4SW100
180
91
324
230
25
ø95ø110
Piston Ø 180 (dimensions in mm – for item no. explanation, see page 3)
Mounting style QOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 B4 B1 B2 1A/F Piston RodØ side side
80 95.2 51 60 40 75
90 108 – – 40 75 50 50125 146 – – 28 115
Self-aligning clevis CGK 80to suit thread type „F”
Material No.: R900001928Weight: 13.1 kg
Permissible load: 375 kN
Self-aligning clevis CGA 80to suit thread type „F”
Material No.: R900303132
Weight: 12.2 kg
Permissible load: 385 kN
Additional thread types
Thread type „E”
Thread type „F”
Nut DIN 934(not for GA 80and GA 100)
14, 15 1, 23 13 12
273+ stroke
Self-aligning clevis CGA 100to suit thread type „F”
Material No.: R900303133
Weight: 21.5 kg
Permissible load: 535 kN
20
16
16
20
16 20
100A/F
RE 17 017/05.03 54/68 CD 210 / CG 210
A-A
R79,5
A
A
80,5
ø 76,23H7f7 176
154
31,5
78
45 241+1,8
241+1
,8
78+0,5
øR
D
„X”„Y”
25,5
7
26
31,5 MA = 1200 Nm
M30
241300355
33
190,
524
1
76
43
A
A
SW1ø
230
A-A
1654576
43EED1; 0,5
6831,5
7625,5
A
øK
K
14
241
45
241 10ø70 45
6°6°
49– 0,15
R 120
15
Piston Ø 200 (dimensions in mm – for item no. explanation, see page 3)
Mounting style BOperating pressure 210 bar
Mounting style GOperating pressure 210 bar
Mounting style C
Operating pressure for rod Ø 90 and Ø 100: 70 bar at base end, 210 bar at rod end
Operating pressure for rod Ø 140: 40 bar at base end, 210 bar at rod end
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1490 M64 x 2 M76 x 2 M80 x 2 89 80
100 M76 x 2 M95 x 2 M80 x 2 101 80 G1 1/2 – M48 x 2 – 65 – 65 –140 M100 x 2 M130 x 2 M110 x 2 140 110
14, 15
14, 15 17
1
1
1 20
Strokemin = 120mm for thread type "E"
(only for CG cylinders)
355.5 + 2xstroke
31.5+stroke
14, 15 13 12
298.5 + stroke
381 + stroke
508.5 + stroke
13 12 16
13 12
1A/F
CD 210 / CG 210 55/68 RE 17 017/05.03
25,5
355300241
190,5
355
300
241
190,
5
33
31,5
øR
D
355
300
241
190,
5
33
31,5
25,5
7
190,5241300355
„X”„Y”
25,5
355300
241
241
190,
5
33
31,5
Piston Ø 200 (dimensions in mm – for item no. explanation, see page 3)
Mounting style HOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 1A/F Piston RodØ side end
90 108 75
100 120 85 50 50140 158 120
Mounting style D
Operating pressure for rod Ø 90 and Ø 100: 210 bar at base end, 110 bar at rod end
Operating pressure for rod Ø 140: 210 bar at base end, 150 bar at rod end
Mounting style K
Operating pressure 210 bar
14, 15
14, 15 1
1
1
324 + stroke
Strokemin = 120 mm for thread type "E"
(only for CG cylinders)
13 12
13 12
324 + stroke
298.5 + stroke
13 12
355.5 + 2xstroke
31.5+stroke
14, 15
RE 17 017/05.03 56/68 CD 210 / CG 210
76
R2
76– 0,3241,576
241
ø 7
6,2
– 0,
03
31,5
7614
95,576241,5 –0,3
10
ø76
,2 –
0,03
R2
„X”„Y”
7615
95,5A
76
4376831,5
EED1; 0,5
ø 2
30
øR
Dø
KK
SW1
25,5
241
+1,8
ø 7
6,2
–0,0
3
95
26
279,5 –0,3 7676
241
R2
M30 „X”„Y”
31,5
MA = 1200 Nm
295
+1,9
Piston Ø 200 (dimensions in mm – for item no. explanation, see page 3)
Mounting style ROperating pressure 210 bar
Mounting style EOperating pressure 210 bar
Mounting style SOperating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1490 M64 x 2 M76 x 2 M80 x 2 89 80
100 M76 x 2 M95 x 2 M80 x 2 101 80 G1 1/2 – M48 x 2 – 65 – 65 –140 M100 x 2 M130 x 2 M110 x 2 140 110
14, 15
Strokemin = 25mm
1
355.5 + 2xstroke
1
298.5 + strokeStrokemin = 120 mm for thread type "E"
(only for CG cylinders)
Strokemin = 120 mm for thread type "E"
(only for CG cylinders)
31.5+stroke
298.5 + stroke260.5 + stroke
13 12
1213
14, 15
1
178 + stroke/2298.5 + stroke
13 12
355.5 + 2xstroke178 + stroke/2
31.5+stroke
14, 15
1A/F
CD 210 / CG 210 57/68 RE 17 017/05.03
31,5
68,5ø48
ø3868,5
„X”„Y” 120,
6 h
10
31,5
12,5
–0,
2
25 –0,07
„X”„Y” 120,
6 h
10
25 –0,07
12,5
–0,
2
ø60
ø4060,5
31,5
311
120,
6 h
10
241
144
60,5
„X”„Y”
45
14 10
241
+1,8
380 +2
Piston Ø 200 (dimensions in mm – for item no. explanation, see page 3)
Mounting style FOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 1A/F Piston RodØ side end
90 108 75
100 120 85 50 50140 158 120
Mounting style LOperating pressure 210 bar
Mounting style M
Operating pressure 210 bar
Strokemin = 120 mm for thread type "E"
(only for CG cylinders)
13
14, 15
14, 15 1
Strokemin = 120 mm for thread type "E"
(only for CG cylinders)
O-ring 42x3168.5 + stroke
298.5 + stroke
13 12
155.5 + stroke31.5+stroke
Strokemin = 120 mm for thread type "E"
(only for CG cylinders)
355.5 + 2xstroke
298.5 + stroke 355.5 + 2xstroke
31.5+stroke
12
1
171.5 + stroke298.5 + stroke
12
31.5+stroke
355.5 + 2xstroke171.5 + stroke
1314, 15
RE 17 017/05.03 58/68 CD 210 / CG 210
„X”
267
RD
„Y”
115
731,5
M30
„Y”
„Y”
ø33ø 335125
29– 0,07 51 29
31,5
– 0,
212
,5
0,2-
0,4 12
0,5 –
0,2
50
190,5190,5
50241
M42
31,5
M30
120,
6
B2
241
– 0,
2
241105 68,5
„X”„Y”
26A15
25,568,5
ø K
K
SW1
øR
D
768
EED1; 0,5
43ø
230
1014
45
7676
MA = 1200 Nm
Piston Ø 200 (dimensions in mm – for item no. explanation, see page 3)
Mounting style NOperating pressure 210 bar
Mounting style TOperating pressure 210 bar
Mounting style P
Operating pressure 210 bar
Piston KK A EE D1rod Thread type Thread type Connection Connection
Ø C, E B F C, E, B F 01 13 02 14 01 13 02 1490 M64 x 2 M76 x 2 M80 x 2 89 80
100 M76 x 2 M95 x 2 M80 x 2 101 80 G1 1/2 – M48 x 2 – 65 – 65 –140 M100 x 2 M130 x 2 M110 x 2 140 110
Strokemin = 120 mm for thread type "E"
(only for CG cylinders)
14, 15
14, 15
14, 15 1
1
1
Strokemin = 120 mm for thread type "E"
(only for CG cylinders)
13 12
298.5 + stroke
31.5+stroke
355.5 + 2xstroke
368.5 + stroke
13 12
168.5 + stroke298.5 + stroke
13 12
155.5 + stroke31.5+stroke
355.50 + 2xstroke
1A/F
CD 210 / CG 210 59/68 RE 17 017/05.03
A
A
Ø K
K
Ø K
K
M30
11524
31,5
267
70-0,4
70
111
M110 x 2
153
105
235
R115
125
-0,2
ø10
0
7˚7˚
60 -0,4
55
81
M80 x 2
125
80
170
R88
95
-0,15
ø80
6˚6˚
Piston Ø 200 (dimensions in mm – for item no. explanations see page 3)
Mounting style QOperating pressure 210 bar
Piston Cushioning lengthrod RDf7 B2 1A/F Piston RodØ side end
90 108 55 75
100 120 55 85 50 50140 158 32 120
Self-aligning clevis CGA 80to suit thread type „F”
Material No.: R900303132Weight: 12.2 kg
Permissible load: 385 KN
Self-aligning clevis CGA 110to suit thread type „F”
Material No.: R900303134Weight: 27.5 kg
Permissible load: 660 KN
Addtional thread types
Thread type „E”
Thread type „F”
114, 15
298.5+ stroke
13 12
16
16
20
20
RE 17 017/05.03 60/68 CD 210 / CG 210
Forces, areas
Operating Piston Ø mm 40 50 63
pressure in bar Piston rod Ø mm 16 18 25 22 25 36 25 28 36 45
75Force; piston end kN 9.43 14.73 23.38
Force; rod end kN 7.91 7.51 5.37 11.88 11.04 7.10 19.69 18.76 15.74 11.44
100Force; piston end kN 12.56 19.64 31.18
Force; rod end kN 10.56 10.03 7.66 15.84 14.71 9.47 26.26 25.03 20.99 15.26
150Force; piston end kN 18.85 29.45 46.76
Force; rod end kN 15.84 15.04 11.48 23.76 22.08 14.20 39.40 37.53 31.49 22.90
210Force; piston end kN 26.39 41.24 65.46
Force; rod end kN 22.17 21.05 16.05 33.27 30.91 19.88 55.15 52.55 44.08 32.06
Piston area cm2 12.56 19.63 31.16
Annulus area cm2 10.55 10.02 7.65 15.83 14.71 9.46 26.25 25.01 20.98 15.26
Dampening Piston end cm2 6.84 13.91 22.10
area Rod end cm2 8.76 8.76 6.41 14.33 13.47 8.29 23.10 23.10 19.80 13.10
Operating Piston Ø mm 80 100 125
pressure in bar Piston rod Ø mm 36 45 56 45 50 70 50 56 63 90
75Force; piston end kN 37.70 58.91 92.04
Force; rod end kN 30.07 25.77 19.22 46.97 44.18 30.05 77.31 73.57 68.66 44.33
100Force; piston end kN 50.27 78.54 122.72
Force; rod end kN 40.10 34.36 25.63 62.63 58.91 40.06 103.08 98.10 91.55 59.11
150Force; piston end kN 75.40 117.81 184.08
Force; rod end kN 60.14 51.54 38.45 93.95 88.37 60.10 154.63 147.13 137.32 88.66
210Force; piston end kN 105.56 164.94 257.71
Force; rod end kN 84.20 72.15 53.83 131.53 123.71 84.13 216.48 206.00 192.25 124.13
Piston area cm2 50.24 78.50 122.66
Annulus area cm2 40.07 34.34 25.62 62.60 58.88 40.04 103.03 98.04 91.50 59.08
Dampening Piston end cm2 30.63 58.90 92.50
area Rod end cm2 36.40 30.60 20.10 57.30 54.70 31.97 92.50 92.50 47.20 47.20
Operating Piston Ømm 150 180 200
pressure in bar Piston rod Ø mm 63 70 80 100 80 90 125 90 100 140
75Force; piston end kN 132.54 190.85 235.62
Force; rod end kN 109.16 103.68 94.84 73.63 153.16 143.14 98.81 187.92 176.72 120.17
100Force; piston side kN 176.72 254.47 314.16
Force; rod end kN 145.55 138.24 126.45 98.18 204.21 190.85 131.75 250.56 235.63 160.23
150Force; piston end kN 265.08 381.70 471.24
Force; rod end kN 218.33 207.38 189.68 147.28 306.32 286.28 197.63 375.85 353.45 240.34
210Force; piston end kN 371.10 534.39 659.74
Force; rod end kN 305.65 290.32 265.55 206.20 428.85 400.80 276.70 526.18 494.83 336.50
Piston area cm2 176.63 254.34 314.00
Annulus area cm2 145.47 138.17 126.38 98.13 204.10 190.75 131.68 250.42 235.50 160.14
Dampening Piston end cm2 126.50 193.6 235.60
area Rod end cm2 130.10 130.10 81.70 81.70 179.00 179.00 109.20 238.70 219.00 137.50
CD 210 / CG 210 61/68 RE 17 017/05.03
Weight
Piston Ø mm 40 50 63
Piston rodØ mm 16 18 25 22 25 36 25 28 36 45
Weight per Single rod cylinder 0.55 0.6 0.8 0.9 1.0 1.3 1.6 1.7 2.0 2.4
100 mm stroke in kg Double rod cylinder 0.75 0,8 1.2 1.2 1.3 2.1 2.0 2.2 2.6 3.6
Mounting style CD CG CD CG CD CG
B 4.7 – 7.5 – 11.3 –
G 4.3 – 7.2 – 10.5 –
Weight for E 5.0 5.7 8.2 9.8 11.1 13.6
zero stroke in kg H 4.6 5.3 7.7 9.3 10.6 13.0
K, D 4.9 – 8.4 – 11.6 –
C, F, L, M, R, S, T 4.2 4.9 6.9 8.4 10.3 12.7
N, P, Q, 4.0 4.7 6.4 8.0 9.3 11.7
Piston Ø mm 80 100 125
Piston rod Ø mm 36 45 56 45 50 70 50 56 63 90
Weight per Single rod cylinder 2.5 3.0 3.6 3.9 4.2 5.6 5.9 6.3 6.8 9.3
100 mm stroke in kg Double rod cylinder 3.3 4.2 5.5 4.1 5.8 8.6 7.8 8.2 9.3 14.3
Mounting style CD CG CD CG CD CG
B 21.0 – 29.5 – 54.7 –
G 19.5 – 28.6 – 48.2 –
Weight for E 21.3 25.5 28.3 35.1 49.5 60.5
zero stroke in kg H 20.0 24.0 27.3 34.0 48.8 61.0
K, D 21.8 – 27.7 – 52.5 –
C, F, L, M, R, S, T 18.7 23.0 25.6 33.0 45.0 57.3
N, P, Q, 17.3 21.3 23.8 30.5 42.5 54.7
Piston Ø mm 150 180 200
Piston rod Ø mm 63 70 80 100 80 90 125 90 100 140
Weight per Single rod cylinder 7.9 8.4 9.4 11.5 11.6 12.7 17.3 15.2 16.4 22.2
100 mm stroke in kg Double rod cylinder 10.4 14.0 13.4 17.7 15.6 17.7 26.9 20.2 22.6 34.3
Mounting style CD CG CD CG CD CG
B 81.3 – 132.2 – 181.5 –
G 72.0 – 119.0 – 160.0 –
Weight for E 76.5 91.5 117.5 142.0 165.0 197.0
zero stroke in kg H 73.5 88.5 110.5 135.0 151.0 183.0
K, D 80.6 – 120.0 – 162.5 –
C, F, L, M, R, S, T 68.6 83.6 106.3 131.0 145.0 177.0
N, P, Q, 66.0 81.0 101.3 126.0 140.0 172.0
CD = Single rod cylinder
CG = Double rod cylinder
RE 17 017/05.03 62/68 CD 210 / CG 210
I
S = I xK12
I
S = IK
Permissible stroke lengths
Mounting styles: Mounting style: Maximum
Piston Rod C, F, H, L, M, N, P, T R available
Ø Ø Operating pressure in bar Operating pressure in bar stroke lengths
in in 75 100 150 210 75 100 150 210 in mm
mm mm Max. permissible stroke in mm Max. permissible stroke in mm (standard)
16 560 470 370 295 330 270 200 150
40 18 745 635 505 415 455 365 270 210 1000
25 1000 1000 1000 845 990 830 650 520
22 880 750 595 490 545 450 325 250
50 25 1160 990 785 645 770 620 480 380 1200
36 1200 1200 1200 1200 1200 1200 1170 960
25 880 745 655 470 540 445 380 255
63 28 1145 975 775 640 735 610 455 350 140036 1400 1400 1325 1100 1275 1080 845 685
45 1400 1400 1400 1400 1400 1400 1400 1210
36 1505 1285 1025 845 985 815 625 490
80 45 1700 1700 1645 1365 1585 1340 1055 855 1700
56 1700 1700 1700 1700 1700 1700 1700 1480
45 1875 1600 1275 1050 1240 1030 790 625
100 50 2000 1990 1585 1300 1515 1280 995 800 2000
70 2000 2000 2000 2000 2000 2000 2000 1890
50 1820 1545 1220 1000 1160 970 740 585
125 56 2300 2005 1605 1325 1585 1330 1025 815 230063 2300 2300 2035 1680 1965 1660 1300 1050
90 2300 2300 2300 2300 2300 2300 2300 2300
63 2450 2085 1655 1360 1585 1330 1030 825
150 70 2600 2600 2115 1755 2100 1775 1385 1120 260080 2600 2600 2600 2280 2600 2265 1780 1445
100 2600 2600 2600 2600 2600 2600 2600 2590
80 2800 2800 2245 1845 2160 1820 1415 1135
180 90 2800 2800 2800 2515 2680 2270 1790 1455 2800
125 2800 2800 2800 2800 2800 2800 2800 2800
90 3000 3000 2690 2240 2680 2270 1790 1455
200 100 3000 3000 3000 2845 3000 2825 2260 1865 3000
140 3000 3000 3000 3000 3000 3000 3000 3000
Perm
. stro
ke
Perm
. stro
ke
CD 210 / CG 210 63/68 RE 17 017/05.03
I
S = I xK12
I
S = IK
Permissible stroke lengths
Mounting styles: Mounting styles: Maximum
Piston Rod B, G und S D, K,Q und E available
Ø Ø Operating pressure in bar Operating pressure in bar stroke lengths
in in 75 100 150 210 75 100 150 210 in mm
mm mm Max. permissible stroke in mm Max. permissible stroke in mm (standard)
16 95 65 30 10 195 155 105 70
40 18 160 120 75 45 285 230 170 130 1000
25 415 340 250 190 620 520 405 325
22 195 150 95 60 340 280 205 155
50 25 295 235 160 115 465 385 290 225 1200
36 760 635 490 390 1090 925 730 600
25 185 140 105 45 330 265 225 140
63 28 280 220 150 105 460 380 285 220 140036 555 455 340 260 820 690 535 430
45 960 810 630 505 1365 1165 920 755
36 380 305 215 150 615 510 390 305
80 45 690 570 425 325 1025 860 670 540 1700
56 1175 990 770 615 1670 1425 1130 925
45 495 400 285 205 775 645 495 390
100 50 650 530 385 290 975 820 630 500 2000
70 1495 1265 990 800 2000 1800 1430 1180
50 455 360 245 165 735 610 455 350
125 56 640 525 380 285 990 830 640 510 230063 855 700 525 400 1270 1070 830 665
90 2035 1730 1365 1115 2300 2300 1960 1625
63 640 510 360 255 1010 845 645 505
150 70 865 710 530 405 1315 1110 865 700 260080 1180 975 735 570 1740 1465 1140 920
100 2045 1725 1355 1095 2600 2465 1965 1620
80 900 725 525 390 1390 1165 895 710
180 90 1280 1065 815 640 1900 1615 1275 1044 2800
125 2740 2325 1840 1500 2800 2800 2645 2195
90 1095 905 675 520 1675 1420 1120 910
200 100 1445 1205 920 725 2150 1830 1450 1190 3000
140 3000 2630 2080 1700 3000 3000 2990 2485
Perm
. stro
ke
D, K und Q
Perm
. stro
ke
I
S = IK
E
Perm
. stro
ke
RE 17 017/05.03 64/68 CD 210 / CG 210
Buckling calculation
Stop tube extension
With long strokes and compressive loads, a stop tube is recommendedin order to reduce the bearing loads when the rod is extended.
The calculations for buckling are normally carried out according toEuler, as the piston rod is normally considered as a slender column.
i.e. at this load, the rod will buckle!
Buckling load K = π2 • E • JsK
2 in N
SKMax. operating load F = in N
Without stop tube extensionDistance between the guides
With stop tube extension
2 3 1
sK = Free buckling length in mm
E = Module of elasticity in N/mm2
= 2.1 • 105 for steel
J = Moment of inertia in mm4
for circular cross-sectional area
=
S = Safety (3.5)
12
Distance between the guides
64d 4 • π
= 0.0491 • d 4
Installation length of cylinders with stop tube extensions:
Installation length of standard cylinder + stop tube extension(The position of the trunnions for mounting styles E + R are not changed.)
Stop tube extension in mm for all piston Ø
– 25 50 75 100 125 150 175
Mounting style Stroke lengths in mm
B, G, S Up to 500 501 to 625 626 to 750 751 to 875 876 to 1000 1001 to 1125 1126 to 1250 1251 to 3000
C, F, H, L Up to 1425 1426 to 1785 1786 to 2150 2151 to 2500 2501 to 2860 2861 to 3000 – –
D, E, K, Q Up to 665 666 to 835 836 to 1000 1001 to 1165 1166 to 1335 1336 to 1500 1501 to 1665 1666 to 3000
R Up to 1000 1001 to 1250 1251 to 1500 1501 to 1750 1751 to 2000 2001 to 2250 2251 to 2500 2501 to 3000
M, N, P, T Up to 1425 1426 to 1785 1786 to 2150 2151 to 2500 2501 to 2860 2861 to 3000 – –
Orderingdetails
A spacer bush (3) is inserted between piston (1) and cylinder head (2).The spacer bush extends the lever arm and thus reduces the bearingloads.
CD 210 / CG 210 65/68 RE 17 017/05.03
+
–
EHH
E
Installation: 180° offset from connections
Connection: Enlarged connections are subject to priorconsulation with Dept. BRI-ZY
Mounting style: With mounting styles F, L, M, N and T it is notpossible to mount 180° offset from connections!
For main dimensions and mounting styles, see pages 6 to 59
Inductive proximity switches are used for reliable end position controlin hydraulic cylinders. They are an important element in the safe andaccurate monitoring of the end positions of safety devices, lockingdevices and/or other machine functions, by means of a signal output.
Depending on the clyinder version, the switching point is between1 mm and 4 mm before the end of the stroke, with a repeatability of ≤0.5 mm.
On safety grounds the proximity switch is secured against being screwedin too far, and for this reason the switching point is not adjustable
– Reliable, accurate end position control
– Contact and wear-free switching
– Pressure resistant to a max. of 500 bar
– Integral mounting gives good protection against damage andenvironmental influences
– Integrated short circuit protection
Inductive proximity switches (dimensions in mm)
Output circuit
E = Mounting space
State in clear text in a case of an order!
Technical data
Further notes
Pressure resistant bar Max. 500
Operating voltage including residual ripple V DC 10 to 30
Residual ripple of operating voltage % Max. 15
Output technology PNP
Switching function N.O.
Idle current mA ≤ 10
Output loading Ω ≥ 200
Output resistance Ra and diode kΩ 4.7
Repeatability mm ≤ 0.5
Max. switching frequency kHz 1
Short circuit protected versionProtection to DIN 40 050 IP 67
Ambient temperature range °C –25 to +70
Connection type 2 m cable is moulded in, 3 x 0.34 mm2
Piston Rod CD 210Ø Ø H E
1640 18 42.5 105
2522 42.5 10550 2536 48 11025 44.5 10863 2836 53 1154536 57 116
80 45 60 1225645 63.5 119100 5070 67.5 13050
125 56 82.5 140639063
150 70 85 1468010080
180 90 108 15912590
200 100 120.5 166140
Brown
Black
Blue
RE 17 017/05.03 66/68 CD 210 / CG 210
WH
A0,
05
A
Z A
A0,
1
A0,
2
ein
gef
ahre
n
Z A
A 0,3 A
0,2
WH
XS
WH
A0,
1
A AZ A
WH
XG
Installation lengths, positional tolerances
Stroke length 1251 2001in mm Up to 1250 to 2000 to 3000
Stroke tolerance +1 +1 +1in mm –1,5 –2 –3
WH ± 2 ± 2+ 3
– 2
ZF ± 1 ± 1.5 ± 2
XS ± 2 ± 2 + 3– 2
SS ± 1.25 + 1.5 + 1.5
– 2 – 3
XG ± 2 ± 2 + 3
– 2
XV ± 2 ± 2 ± 2
XJ ± 2 ± 2 ± 2
XN ± 1.25 ± 2 ± 2
Z 0.1 100
Seals (standard version)
Version "T"
Glide ring for low friction operation
Piston rod seals
Piston seals
XN + stroke
XV + stroke/2
XJ + stroke
Stroke
ZF + stroke
SS + stroke
Version "A"Lip ring for leak-free operationunder static conditions
Version related to piston rod - Ø 50, 63and 80 mm
CD 210 / CG 210 67/68 RE 17 017/05.03
For vertical operation of the cylinder, the force generated by the weightFB applied to the cylinder (consisting of the external load plus thecylinder rod and piston) must be added or subtracted dependentupon the direction of movement.
The cylinder friction is ignored in these calculations.
Calculation of the average dampening pressureNormally the average dampening pressure must not exceed the no-minal pressure of the cylinder.
pD = Average dampening pressure in N/cm2
FB = Deceleration force in NAD = Effective dampening area in cm2
1 bar ~ 10 N/cm2
If the above calculation results in a higher value, then the dampeninglength must be increased or the system pressure reduced.
End position cushioning for cylinder baseThe piston (1) is threaded directly onto the cylinder rod, cushioningbush (2) is screwed onto the cylinder rod by means of a retainingring (3).
As the conical damping bush enters the drilling in the cylinder base(4), the cross-section for the outgoing fluid from the piston chamber(5) reduces until it is zero. The fluid from the piston chamer (5) canthen only flow via drilling (6) and the adjustable throttle valve (7).The degree of cushioning is controlled by the setting of throttle valve(7). The smaller the flow cross-section, the greater the degree of endposition dampening.
Adjustable throttle valve for the end position cushioning
The design of the throttle valve prevents the needle valve (8) frombeing completely screwed out when setting the end positiondampening.
When the end position dampening is correctly set, the screw is lockedby means of lock nut (9).
Check valve with bleed screw
This check valve (10) is used as a start-up aide from the end positionand permits the throttle valve to be by-passed at the start of theoutward stroke of the cylinder. The cylinder is bled of air by means ofbleed screw (11).
The bleed screw is fitted as standard on cylinders without end positioncushioning.
The throttle valve and check valve are in a kit form and are interchangable.
End position cushioning
5 6 8 9 73
1 2 11 410
Calculation of the deceleration forceThe end position cushioning must produce a controlled deceleration(braking) of the stroke velocity in both end positions.
In doing this, the total energy comprising of the product of the movingmass and its velocity must not exceed the working parameters of thedampening system.
The energy which is to be braked is converted within the cushioninginto heat, the cushioning works to the principle of throttling a flow.
Calculation of the cushioning forceWhen the cylinder is installed horizontally, the deceleration force canbe calculated as follows:
Cylinder extending FB = Deceleration force in Nm = Moving mass in kg
FB = m • a + AK • p a = Deceleration in m/s2
Cylinder retracting v = Piston velocity in m/ss = Dampening length in m
FB = m • a + AR • p AK = Piston area in cm2
AR = Annulus area in cm2
p = System pressure in N/cm2
1 bar ~ 10 N/cm2
a = v 22 • s
FBAD
pD =
RD 17 01705.03 68/68 CD 210 CG 210
Bosch Rexroth AGIndustrial Hydraulics
D-97813 Lohr am MainZum Eisengießer 1 • D-97816 Lohr am MainTelefon 0 93 52 / 18-0Telefax 0 93 52 / 18-23 58 • Telex 6 89 418-0eMail [email protected] www.boschrexroth.de
Bosch Rexroth Teknik ABVaruvägen 7, ÄlvsjöS-125 81 StockholmTel. +46(08) 72 79 20 0Fax +46(08) 86 87 21eMail [email protected] www.boschrexroth.se
Bosch Rexroth SABP 37 – Z.I. Les FourmisF-74131 Bonneville CedexTel. +33(0)4 50 25 35 45Fax +33(0)4 50 25 35 19Internet www.boschrexroth.fr
The data specified above only servies to describe the product. No statements concerning a certain conditionor suitability for a certain application can be derived from our information.The details stated do not release you from the responsibility for carrying out your own assessment andverification. It must be remembered that our products are subject to a natural process of wear and ageing.
Spare parts diagram
8 Dampening bush
9 Dampening bush
10 Threaded ring
11 Tie rod
19 Nut
20 Guide ring
1 Head
2 Base
3 Piston rod
4 Cylinder tube
5 Flange
6 Guide bush
7 Piston
Version for
piston Ø 40 to 200
3536 21203
978
"X"
103433
2415 11
3537 35 19
6
Throttle and check valve in cylinder base and cylinder head
Throttle valve for piston Ø40 and 50
Throttle valve forpiston Ø 63 to 200
Check valveand bleed point for pistonØ 40 and 50
Check valveand bleed point forpiston Ø 63 to 200
View "X"
Ordering of spare parts:
– When designating individual parts and item nos. from the spare parts diagram, please give complete ordering details of the cylinder.
– For seal sets, please give complete ordering details of the cylinder.
21 Piston seal(version "T")
33 Wiper
34 Rod seal
35 O-ring
36 Back-up ring
37 O-ring