View
292
Download
4
Tags:
Embed Size (px)
DESCRIPTION
The HI-Series Hydraulic Winch comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient instal- lation. This outfit is designed to be installed with a permanent location in mind. SMOOTH OPERATION Planetary SUBMERSIBLE Completely sealed BUILT TO LAST Ductile Iron Body Gear Train is smoothest running self recovery system available. from the elements; vehicle recovery when you would truly need it: covered in mud and water.
Citation preview
HY
DR
AU
LI
C W
IN
CH
SY
ST
EM
S
The Mile Marker Hydraulic Winch System has been a self-recovery icon for over a decade. This legendary system utilizes the vehicle’s OEM power steering pump as its power source. Everyday, more than 200 million power steering pumps op-erate flawlessly. Used in all types of vehicles, under every condition, from 50 below to 135 degrees above, the pump must perform for years without service or adjustment. It has to withstand every type of abuse without failure. Having a built-in governor (the pressure relief valve), it is impossible to overload or overwork the pump.
Steering is arguably the most important function while driv-ing, so the power steering pump has evolved into the most reliable system on vehicles today. Mile Marker chose to design a winch to use this continuous reliable power supply over the battery power used by competitors. After rigorous testing, we learned it was the right choice. The Mile Marker Hydraulic Winch can run continuously under load without any battery drain. This Hydraulic Winch System is the choice of the U.S Army, as Mile Marker became the primary self-recovery outfitter for the HMMWV (Hummer) as well as many other tactical ve-hicles around the globe.
The H-Series Hydraulic Winch Line offers the most versatility in mounting and installation options. With a completely independent solenoid control valve and multi-directional motor positions, the H Series is the professional choice for a custom recovery system applica-tion.
The HI-Series Hydraulic Winch comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient instal-lation. This outfit is designed to be installed with a permanent location in mind.
PAGE 6 PAGE 8
SUBMERSIBLE Completely sealed from the elements; vehicle recovery when you would truly need it: covered in mud and water.BUILT TO LAST Ductile Iron Body
(12,000 lb models) and Stainless Steel Fasteners provide unmatched construction for a lifetime of corro-sion-free abuse.
SMOOTH OPERATION Planetary Gear Train is smoothest running self recovery system available.
PAGE 4
PAGE 5
Included in Kit: 12 ft. lead remote control, All hoses and fittings included, Power in and Power out, Remote Solenoid-activated con-trol valve (draws only 2 amps), Adapter for vehicle specific power steering pump. Rated to 7 gpm. Required for H Series Winches.
FEATURES H9000 SPECIFICATIONS H9000FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speed
PERFORMANCE H9000
FEATURES H10500 SPECIFICATIONS H10500
PERFORMANCE H10500
FEATURES H12000 SPECIFICATIONS H12000
PERFORMANCE H12000
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
Part Number 70-50080CRated line pull (single line)
9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train Planetary
Gear Ratio 6:1 (low gear)1:1(high gear)
Motor 14 C.I. Hydraulic
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: Diameter/Length 2.5” (6.4 cm)/9” (23cm)
Total shipping weight 93 lbs. (42.2 kg)
Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
Part Number 70-50050CRated line pull (single line)
10,500 lbs.@1500 PSI (4,770 kgs.)
Gear Train Planetary
Gear Ratio 6:1 (low gear)1:1(high gear)
Motor 17.9 C.I. Hydraulic
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: Diameter/Length 2.5” (6.4 cm)/9” (23cm)
Total shipping weight 93 lbs. (42.2 kg)
Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
HY
DR
AU
LI
C W
IN
CH
SY
ST
EM
SFreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speed
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fastenersReversible mounting on 3 sidesDuctile Iron Body2 speed
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
H SERIES HYDRAULIC The Mile Marker H Series Hydraulic Winch can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. This system is independent from its solenoid control pack to give more freedom in mounting options and vehicle application. The installation of one of the H Series models (H9000, H10500, and H12000) requires a vehicle specific 34-Series valve adapter kit (see application chart be-low).
Chevy/GMC 34-5010-15 88+ GM C/K,99+ Tahoe/Suburban, Sil-
verado34-5020-14 72-87 GM C/K, 88-91 RV
series34-5010-12 GM S-series34-5010-13 GM S-series w/4.3L Vortec
Ford34-5010-09 1997+ ford F-150, Expedtion34-5020-07 78-96 Ford full size. 97-98 F250,
F35034-5010-07H 78-98 Ford full size (with
hydroboost)34-5020-06 72-77 Ford full size34-5020-04 83-92 Ford Ranger, 90-94
Explorer34-5020-05 92-96 Ford Ranger, 95-96
Explorer34-5010-34 99-04 Ford 250, 350, 450, 550,
Excursion34-5020-35 2005 and up Ford 250, 350,450, 550,
Excursion34-5020-10 02+ Ford Ranger/Sport Trac
Dodge34-5010-24 Dodge 94+full size34-5020-23 Dodge 72-93 full size34-5010-20 Dodge Dakota 4 cylinder34-5020-22 Dodge Dakota 6 & 8 cylinder
International34-5010-18 Truck & Scout
Jeep34-5010-50 Jeep Cherokee34-5020-51 Jeep CJ, Scrambler34-5020-55 Jeep YJ, TJ & Rubicon
Nissan34-5010-30 Nissan 86-93 except Pathfinder 91-
95, 94-96 truck34-5010-31 91-95 Nissan Pathfinder, 94-
96 truck
Toyota34-5020-41 Toyota All
Land Rover34-5010-45 Land Rover Discovery 94-98
AM Gen.-Hummer34-5010-17 HI (Civilian)34-5010-15 H2
General kit34-5010-01 General kit; does not include PS
pump34-5011-00 Valve only; 24-volt system (No
hose, fittings)Medium Duty Trucks34-5010-80 (International 7400)
Part Number 70-52000CRated line pull (single line)
12,000 lbs.@1500 PSI (5,454 kgs.)
Gear Train Planetary
Gear Ratio 6:1 (low gear)1:1(high gear)
Motor 18.7 C.I. Hydraulic
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: Diameter/Length 2.5” (6.4 cm)/9” (23cm)
Total shipping weight 98 lbs. (44.5 kg)
Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)PAGE
6PAGE
7
FEATURES HI9000 SPECIFICATIONS HI9000
PERFORMANCE HI9000
ADAPTERS MIGHT DIFFER FROM ITEMS SHOWN
To be used to adapt power steering pump to HI Series Winch System. See Chart for Specific Vehicle Application.
FEATURES HI10500 SPECIFICATIONS HI10500
PERFORMANCE HI10500
FEATURES HI12000 SPECIFICATIONS HI12000
PERFORMANCE HI12000
HI SERIES HYDRAULIC The Mile Marker HI Series Hydraulic Winch was intended for permanent mounting in the front or rear of a vehicle. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. These systems include all necessary hoses, so-lenoid control valve, remote pendant, roller fairlead with fasteners, and winch cable. To adapt to your vehicle’s power steering pump, the HI Series winches (HI9000, HI10500, and HI12000) re-quire a vehicle specific 35-series vehicle adapter kit (see below).
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
Part Number 75-50085C
Rated line pull 9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 14 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integtrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 6.16 7.48 8.8 10.5Rated pull (lbs.) 9,000 7,300 6,200 5,400Line speed-high gear (FPM) 33.6 38.4 48 57Rated pull (lbs.) 1,500 1,200 1,000 900
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power out
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 10,500 8,500 7,400 6,400Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 1,600 1,300 1,200 1,000
Part Number 75-50050CRated line pull 10,500 lbs.@1500 PSI (4,770 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 17.9 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integtrated (max flow 3.5 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 103 lbs. (46.7 kg)Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
HY
DR
AU
LI
C W
IN
CH
SY
ST
EM
S
FreespoolingMechanical lockSealed against the elementsCan use underwaterCorrosion resistantStainless steel tie bars and fasteners2 speedpower in & power outReversible MountingDuctile Iron Body
3.5 GPM @ 1500 PSILayer of Cable 1 2 3 4Line speed-low gear (FPM) 5.65 6.43 7.41 8.58Rated pull (lbs.) 12,000 9,400 8,200 7,000Line speed-high gear (FPM) 31 36 42 48Rated pull (lbs.) 2,000 1,550 1,350 1,150
PART NUMBER: APPLICATION:
35-5020-15GM, Dodge, International,
Chevrolet, H2
35-5020-22 2003 & up Durango
35-5020-07 Ford, up to 1998
35-5020-34Ford 1999 to 04; F-150 1997
to 04
35-5020-10 Ford SportTrac/Ranger
35-5020-51 Jeep
35-5020-31 Nissan
35-5020-41 Toyota
35-5020-45 Land Rover
35-5020-17 AM General–Hummer H1
35-5020-35 2005 and up Ford Super Duty
35-5020-36 2007 Ford F-550 Only
35-5020-81 Chevy 5500
Part Number 75-52000CRated line pull 12,000 lbs.@1500 PSI (5,454 kgs.) Gear Train PlanetaryGear Ratio 6:1 (low gear)1:1(high gear) Motor 18.7 C.I. HydraulicDirectional Control 12V Solenoid, 3 wayValve Integrated (max flow 7 gpm) 2 ampsControl Pendant 12’ Wired Remote
Hoses5’ & 6.5’: steel braid, high pres-sure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable 3/8” x 100’ (14,400 lbs. nominal)Drum Size: 2.5” (6.4 cm)/9” (23cm)Total shipping weight 110 lbs. (49.9 kg)
Bolt Pattern 10” x 4.5” (4 bolts, 3/8”)
PAGE 8
PAGE 9
EL
EC
TR
IC
WI
NC
H S
YS
TE
MS
FEATURES PEC8•Clockable Clutch •Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead
PERFORMANCE PEC8lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004000 1814 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 77-50140Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.1 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PEC8
FEATURES SEC9.5•Illuminated Controls •Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
PERFORMANCE SEC9.5 Line Pull Line Speed Motor
Part Number 76-50246Rated line pull 9,500 LBS (4,309 KG) Gear Train 3 Stage PlanetaryGear Ratio 212:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 7.91” (548mm X 160 MM X 200 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 92 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SEC9.5
FEATURES SEC12
PERFORMANCE SEC12lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
Line Pull Line Speed Motor
Part Number 76-50251 Rated line pull 12,000 LBS (5,443 KG) Gear Train 3 Stage PlanetaryGear Ratio 296:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 7.91” (548mm X 160 MM X 200 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 92 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SEC12•Illuminated Controls •Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. Featuring powerful mo-tors, illuminated controls and planetary gear-ing, the TOUGH SERIES winches provide ex-pedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.
Multi-FunctionIlluminated LED
in IP65 Control Box
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
PAGE 18
PAGE 19
FEATURES SI9500•Integrated Housing •Illuminated Pendant•Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
PERFORMANCE SI9500 Line Pull Line Speed Motor
Part Number 76-50147Rated line pull 9,500 LBS (4,309 KG) Gear Train 3 Stage PlanetaryGear Ratio 212:1Motor 4.8 HP Series Wound (3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI9500
FEATURES SI12000
PERFORMANCE SI12000lbs. kgs. fpm mpm amps@12v0 0 23 7 90
2000 907 12.8 3.9 1454000 1814 9.7 2.9 1856000 2722 7.9 2.4 2308000 3629 7.1 2.1 27010000 4536 5.1 1.6 31512000 5443 4.5 1.4 315
Line Pull Line Speed Motor
Part Number 76-50152Rated line pull 12,000 LBS (5,443 KG) Gear Train 3 Stage PlanetaryGear Ratio 296:1Motor 4.8 HP Series Wound(3.6 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.6” X 6.6” X 10” (548mm X 160 MM X 254 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 93 lbs. (42 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS SI12000
EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. Featuring powerful mo-tors, illuminated controls and planetary gear-ing, the TOUGH SERIES winches provide ex-pedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.
•Integrated Housing •Illuminated Pendant•Planetary Gear System•Automatic Load Holding Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In and Power Out•Low Electric Current•3/8 in. x 100ft CABLE•Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
lbs. kgs. fpm mpm amps@12v0 0 25.7 7.8 90
2000 907 15.1 4.6 1504000 1814 10.5 3.2 2106000 2722 7.9 2.4 2708000 3629 5.9 1.8 3209500 4309 4.3 1.3 375
EL
EC
TR
IC
WI
NC
H S
YS
TE
MS
INTEGRATED SOLENOID WINCHES
PAGE 20
PAGE 21
EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. Featuring powerful mo-tors, illuminated controls and planetary gear-ing, the TOUGH SERIES winches provide ex-pedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.
Multi-FunctionIlluminated LED
in IP65 Control Box
FEATURES PE6000•Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead
PERFORMANCE PE6000lbs. kgs. fpm mpm amps@12v0 0 15 4.6 35
1000 454 11 3.3 803000 1361 8 2.5 1005000 2268 5 1.5 1456000 2722 4.6 1.4 170
Line Pull Line Speed Motor
Part Number 76-50230Rated line pull 6,000 LBS (2,722 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 3.6 HP Perm. Magnet (2.7 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 17.24” X 6.22” X 7.28” (438MM X 158 MM X 185 MM)
Cable 5/16” x 85’(9,800 nominal)(7.94 MM X 26.06M)
Drum Size: 2.5” (6.4 cm)/5.5” (140 Cm)
Net weight 68 lbs. (31 kg)Bolt Pattern 6.535” x 4.5” (166MM X
114MM)
SPECIFICATIONS PE6000
FEATURES PE8000•Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead
PERFORMANCE PE8000lbs. kgs. fpm mpm amps@12v0 0 13 3.9 35
2000 907 11 3.3 1004500 2041 9 2.7 1806000 2722 6 1.8 2308000 3629 5 1.5 300
Line Pull Line Speed Motor
Part Number 76-50240Rated line pull 8,000 LBS (3,629 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4 HP Perm. Magnet (3 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21” X 6.22” X 8.25” (533MM X 158 MM X 209.5 MM)
Cable 5/16” x 100’(9,800 nominal)(7.94 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 80 lbs. (36 kg)Bolt Pattern 10” x 4.5” (254MM X 114MM)
(4 bolts, 3/8”)
SPECIFICATIONS PE8000
FEATURES E9000•Illuminated Controls •Planetary Gear System•Automatic Load Hold-ing Brake•FRP Sheath Protecting all Cables•Free Spooling•Power In & Power Out•Low Electric Current•Galvanized Roller Fairlead
PERFORMANCE E9000lbs. kgs. fpm mpm amps@12v0 0 15 4.6 33
3000 907 11.2 3.4 1206000 1814 8.1 2.5 2109000 2722 5 1.5 305
Line Pull Line Speed Motor
SPECIFICATIONS E9000Part Number 76-50042Rated line pull 9,000 LBS (4,090 KG) Gear Train 3 Stage PlanetaryGear Ratio 210:1Motor 4.4 HP Perm. Magnet (3.35 KW) 12V DCControl Pendant Illuminated 2-Button
Dimensions (LxWxH) 21.45” X 6” X 6.38” (544MM X 152 MM X 162 MM)
Cable 3/8” x 100’(14,400 nominal)(9.53 MM X 30.5M)
Drum Size: 2.5” (6.4 cm)/9” (23cm)Net weight 84 lbs. (38.1 kg)Bolt Pattern 10” x 4.5” (254MM X
114MM)(4 bolts, 3/8”)
EL
EC
TR
IC
WI
NC
H S
YS
TE
MS
PAGE 22
PAGE 23
AT
V
WI
NC
HI
NG
S
YS
TE
MS
EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems are trail proven winches that have been Tested to the Extreme. The PE models are a compact, battle-proven resource for your trail conquering ATV. These winches feature the no compromise, all metal construction of all other models, without the innovative control of MiFi Technology™. The TOUGH SERIES, PE winches will get down to work, and get you through your path.
FEATURES PE2500•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor•Includes both Handle bar Switch and 12’ Wired PendantPERFORMANCE PE2500
Line Pull Line Speed Motor
Part Number 76-50105Rated line pull 2500 lbs. (1134 kg) Gear Train PlanetaryGear Ratio 153:1Motor .9 hp Perm Magnet (.7kw ), 12 volt
Control Pendant Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) 13” x 5” x 5” (330mm x 127mm x 127mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 2” (50 mm) x 2.95” (75 mm)
Net weight 24 lbs. (11.8 kg)Bolt Pattern 3” x 4.87”
(76.2 mm x 124 mm)
SPECIFICATIONS PE2500
FEATURES PE3000•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor
PERFORMANCE PE3000 Line Pull Line Speed Motor
Part Number 76-50110Rated line pull 3,000 lbs. (1362 kg) Gear Train PlanetaryGear Ratio 153:1Motor 1.8 HP Perm. magnet (1.3 kw), 12V
Control Pendant Illuminated 2-Button
Dimensions (LxWxH) 12.9” x 4.22” x 4.3” (330.2mm x 107mm x 112.5mm)
Cable 3/16” x 50’(4200 nominal)(4.76 MM X 15.2 M)
Drum Size: 1.5 (38mm) x 3.2” (82mm)Net weight 21 lb (9.6 kg)Bolt Pattern 3 Bolt, 1.9” x 3.07”
(48 mm x 78 mm)
SPECIFICATIONS PE3000
lbs. kgs. fpm mpm amps@12v0 0 19.1 5.8 12500 227 15.3 4.7 311000 454 12.8 3.9 621500 680 9 2.7 902000 907 6.4 2 1142500 1134 4.5 1.4 154
lbs. kgs. fpm mpm amps@12v0 0 10 3 15800 363 8 2.4 501500 680 7.2 2.2 802200 1000 6.6 2.0 1103000 1362 4.6 1.4 145
FEATURES PE3500•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor
PERFORMANCE PE3500 Line Pull Line Speed Motor
SPECIFICATIONS PE3500
lbs. kgs. fpm mpm amps@12v0 0 12 3.7 15
1000 454 9.2 2.8 402000 908 7.5 2.3 803000 1362 5 1.5 1203500 1589 4 1.2 140
Part Number 76-50112Rated line pull 3,500 lbs. (1589 kg)Gear Train PlanetaryGear Ratio 262:1Motor 2 HP Perm. Magnet (1.5kw), 12 volt
Control Pendant Illuminated 2-Button
Dimensions (LxWxH) 13.4” x 4.22” x 4.3” (340.2mm x 107mm x 112.5mm)
Cable 7/32” x 45’(5600 nominal)(5.45 MM X 13.7 M)
Drum Size: 1.5 (38mm) x 3.2” (82mm)Net weight 23 lb (10.6 kg)Bolt Pattern 1.9” x 3.07”
(48 mm x 78 mm)PAGE 30
PAGE 31
EVERYTHING YOU NEED, NOTHING YOU DON’TMile Marker’s TOUGH SERIES recovery sys-tems have you covered from the trail, to the trailer, and from the clay to the construction site. These utility winches have infinite uses, and you can count on them to get the job done over and over again.
Utility Winches
FEATURES PE2000•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor•Includes both Handle bar Switch and 12’ Wired PendantPERFORMANCE PE2000
Line Pull Line Speed Motor
Part Number 76-50100Rated line pull 2,000 lbs. (907 kg) Gear Train PlanetaryGear Ratio 153:1Motor 1.5 hp Perm Magnet (1kw) 12V
Control Pendant 2-Button
Dimensions (LxWxH)12.2” x 4.13” x 4.35” (309mm x 105mm x 111mm)
Cable 5/32” x 50’ (4200 nominal)(4 MM X 15.2 M)
Drum Size: 2.56”(65 mm) x 2.86” (72.6 mm)
Net weight 15 lb (6.6 kg)Bolt Pattern T-Shaped 3” (76.2mm) x
1.9” (48.3mm)
SPECIFICATIONS PE2000
lbs. kgs. fpm mpm amps@12v0 0 14 4.3 14
1000 454 9 2.7 601500 680 7.5 2.3 902000 907 5.9 1.8 115
FEATURES PE4500•Illuminated Controls •Planetary Gear System•Dynamic Brake•Free Spooling•Power In & Power Out•Low Electric Current•Heavy Duty Permanent Magnet Motor
PERFORMANCE PE4500 Line Pull Line Speed Motor
SPECIFICATIONS PE4500
lbs. kgs. fpm mpm amps@12v0 0 14 4.3 35
1500 680 6.6 2 802200 998 5.2 1.6 1003000 1361 4.6 1.4 1454500 2041 3.3 1 170
Part Number 76-50115Rated line pull 4,500 lbs. (2,043 kg)Gear Train PlanetaryGear Ratio 294:1Motor 1.9 HP Perm. Magnet(1.4kw), 12 volt
Control Pendant Illuminated 2-Button
Dimensions (LxWxH) 17.16” x 6.2” x 7.3” (436mm x 152mm x 185mm)
Cable 1/4” x 85’(7000 lbs. nomi-nal)(5.45 MM X 13.7 M)
Drum Size: 2.5 (63mm) x 5.5” (140mm)Net weight 51 lb (23 kg)Bolt Pattern 6.535” x 4.5”
(166 mm x 114.3 mm)
AT
V
WI
NC
HI
NG
S
YS
TE
MS
PAGE 32
PAGE 33