HYDRAWISE READY IRRIGATION CONTROLLERS · Hydrawise App User Guide Page 3 © Hunter Industries 2016 V2.07 Files.....42

HYDRAWISEREADYIRRIGATIONCONTROLLERS

HYDRAWISEAPPCONFIGURATIONGUIDE

HydrawiseAppUserGuide Page2 ©HunterIndustries2016 V2.07

TableofContentsIntroduction.....................................................................................................................................4

ConfiguringtheController................................................................................................................4NavigatingThroughtheControllerScreens............................................................................................................4ConnectingtoaWiFinetwork.................................................................................................................................5WirelessConnectionStatusMessages....................................................................................................................7TroubleshootingWirelessConnectionIssues..........................................................................................................7ViewingControllerStatus........................................................................................................................................7ViewingNetworkInformationandTestingInternetConnectivity..........................................................................9ViewingTimeandDate.........................................................................................................................................10

OperatingZonesFromtheController.............................................................................................10ZoneSummary......................................................................................................................................................10ViewingZoneInformation.....................................................................................................................................11

HydrawiseAppConfiguration.........................................................................................................11Registerforanaccountonline..............................................................................................................................11Logintoyouraccount............................................................................................................................................12Linkyourcontrollertoyouraccount.....................................................................................................................15

ConfiguringYourControllerfromtheApporWebsite....................................................................15TimeBasedWatering............................................................................................................................................16Smart(ET)Watering..............................................................................................................................................16AddingaZone........................................................................................................................................................16ConfiguringaMasterValve...................................................................................................................................19ConfiguringProgramStartTimes..........................................................................................................................21ConfiguringPreconfiguredSchedules...................................................................................................................23

ViewingPreconfiguredWateringSchedules......................................................................................................................23ConfiguringSensors...............................................................................................................................................23SettingWateringTriggers......................................................................................................................................27

TriggersforTimeBasedWatering......................................................................................................................................27TriggersforSmart(ET)Watering........................................................................................................................................28

CreatingAlerts.......................................................................................................................................................29

Monitoring.....................................................................................................................................32Dashboard.............................................................................................................................................................32

ZoneInformation................................................................................................................................................................32TemperatureandRainfall...................................................................................................................................................34Forecast..............................................................................................................................................................................35Sensors...............................................................................................................................................................................35ControllerStatus.................................................................................................................................................................35ChangingyourCurrentController......................................................................................................................................35

Reports..................................................................................................................................................................35WeatherStations..................................................................................................................................................37Configuration........................................................................................................................................................38

ControllerSettings..............................................................................................................................................................38ExpansionModules............................................................................................................................................................39OfflineWaterAdjustments.................................................................................................................................................39

SetupWizard.........................................................................................................................................................40MyAccount...........................................................................................................................................................40

AccountDetails...................................................................................................................................................................40Controllers..........................................................................................................................................................................41Users...................................................................................................................................................................................41


Files.....................................................................................................................................................................................42

Contractors....................................................................................................................................43HowtoRegisterasaContractor...........................................................................................................................43TheHydrawiseContractorPortal..........................................................................................................................46

Dashboard..........................................................................................................................................................................46CustomersandControllers.................................................................................................................................................47CustomerEvents.................................................................................................................................................................48CustomerWideSettings.....................................................................................................................................................49MyBusiness........................................................................................................................................................................49

HowtoAddaCustomer........................................................................................................................................49ManagingCustomersandControllers...................................................................................................................51

Plans...................................................................................................................................................................................52Controllers..........................................................................................................................................................................52Users...................................................................................................................................................................................53Files.....................................................................................................................................................................................53

HowtoUpdateyourBusinessDetails...................................................................................................................54HowtoConfigureyourCustomers’Controllers....................................................................................................56

ConfigureaController........................................................................................................................................................56DeleteaController.............................................................................................................................................................57MoveaController...............................................................................................................................................................57AttachaSerialNumber......................................................................................................................................................58RemoveaSerialNumber....................................................................................................................................................58GenerateJobSheet............................................................................................................................................................59

HowtoAddaControllerforaCustomer...............................................................................................................61HowtoAddaPlantoaCustomer.........................................................................................................................62

AddaPlanusingaCode.....................................................................................................................................................63AssignanAvailablePlan.....................................................................................................................................................63PurchaseCustomerPlan.....................................................................................................................................................64

HowtoAddaUser................................................................................................................................................65HowtoManageUsers...........................................................................................................................................66

EdittheUser.......................................................................................................................................................................67DeletetheUser...................................................................................................................................................................68ResendtheActivationEmail...............................................................................................................................................68SendaLostPasswordEmail...............................................................................................................................................69

HowtoManageFiles.............................................................................................................................................69AddaFile............................................................................................................................................................................69RenameaFile.....................................................................................................................................................................70DeleteaFile........................................................................................................................................................................70

CreatingCustomerWideSettings.........................................................................................................................71GlobalAlerts.......................................................................................................................................................................71PreconfiguredWateringSchedules....................................................................................................................................73

HowtoMonitoryourCustomers’Controllers.......................................................................................................73TypesofEvents...................................................................................................................................................................74

HowtoStopCustomersChangingtheirSettings..................................................................................................74Changeanexistingcustomer’spermissions.......................................................................................................................74

HowtoseeChangestoCustomerConfiguration..................................................................................................75Reports...............................................................................................................................................................................75

GettingHelp...................................................................................................................................76

Certifications..................................................................................................................................76CanadianFCCStatement.......................................................................................................................................76USFCCStatement.................................................................................................................................................76


IntroductionThis guide covers configuration of your Hydrawise™ Ready controller using the Hydrawise App forAppleorAndroidorconfigurationusingyourwebbrowser.

BecauseeachHydrawise™Readycontrollermodel isslightlydifferentpleaseconsulttheQuickStartGuide supplied with your model for information on hardware installation and connection to yourirrigationsystem.

ConfiguringtheController

Navigating Through the Controller Screens Thecontrollerfeaturesafullcolortouchscreenmakingnavigationeasy.

TheHomescreen, shownbelow,has3buttonsallowingyou toviewandrunyour irrigationzones,changecontrollersettingsorviewstatusinformation.

Eachscreen(exceptforthehomescreen)hastwobuttonsatthetopofthepageallowyoutoquicklynavigatetotheHomescreenorthepreviousscreen.

All itemsoneachscreenarecolorcodedto indicatewhichscreenelementsarebuttonsandwhichscreenelementsindicatestatusinformation.

GREENscreen items indicatesettings thatcanbechanged. IfyoutouchontheGREENcoloritemthenyou'llbeabletochangethatsetting.

Go to previous screen(changes not saved) 21 Go to Home screen

(changes not saved)

4

3GREEN items indicate settings which can be changed

GREY items indicate status information

Touch to view controller status information

Touch to view all Zones

Touch to change controller settings


GREYcoloreditemsindicatestatusinformation.Touchingonthesehasnoeffect.

Connecting to a WiFi network Whenyourcontrollerisfirstpoweredonitwillrunashortwizardtoconnectyourcontrollertoyourwirelessrouter.

Ifyou’renotusingtheinitialstartupwizardthengotothesectionViewingWirelessSettingstochangeyourwirelesssettings.

UsingTheWizard1. Selectyourwirelessnetwork fromthe listshownonthecontrollerdisplayandpress the

Confirmbuttononscreen.

2. EnteryourwirelesspasswordandpresstheOKbuttononkeyboard.

IfyouhaveissuesconnectingtowirelessthenthesectionViewingWirelessSettingshasmoretroubleshootinginformation.

ViewingWirelessSettingsFromtheHomescreen navigateto theWirelessSettingsbypressingSettingsèWirelessSettings.

TosuccessfullyconnecttheHydrawiseunittoyourwirelessrouteryouwillneedtocorrectlyselectyourwirelessrouter,wirelesssecuritymodeandenteryourwirelesspassword.

Touch to change wireless security type

Touch to change wireless access point

Touch to change wireless password

Current wireless connection status

Note

Ifyou'reenteringinformation intothecontrollerandusetheHomeorBackbuttonsthenyourchangesonthatscreenwillnotbechanged.AlwaysusetheOKorConfirmbuttonstoconfirmyourchanges.

Ifyournetworkisnotlistedthencheckthattheunitiswithinwirelessrange.

Make sure you press theOK button after you’ve entered your password. Pressing theHome orBackbuttons willnotsaveyourchanges.

Whenconnectingtoyourwireless, theWiFi Icon atthebottomrightofthecontrollerscreenwillflash.Connectingtakesabout30secondsandwhensuccessfullyconnectedtheWiFiIcon willstopflashingandstayon.


Thecurrentstatusofthecontroller’sconnectiontoyourwirelessrouterisshownatthetopofthescreen.Thecontrollerwillautomaticallyattempttoconnecttotheconfiguredaccesspointifaconnectionislost(forexample,afterpowerfailure).

Touchonanyofthegreenbuttonstochangethewirelesstype,securitytypeorpassword.

ConfiguringWirelessNameTouchingonthecurrentlyconfiguredWirelessNamewillautomaticallystartascanofalllocalwirelessroutersandallowyoutochooseanewone.

Afterabout5secondsalistoffoundwirelessnetworkswillbelisted.Toselectawirelessname,touchonthewirelessnameandthentouchConfirm.DonotpresstheHomeorBackbuttonsafterselectingyourwirelessroutername–theseoptionswillnotsaveyourroutername.

Eachtimeyoutouchawirelessnamethesignalstrengthwillbeshownatthebottomofthescreen.

Ifyourwirelessrouterisnotshownthencheckthefollowing–

• YourHydrawisecontrolleriswithinrangeofyourwireless.• Youraccesspointisconfiguredtoacceptconnectionsfrom802.11b/gwirelessclients.

If your wireless router is hidden you may manually enter it by selecting Manually enterwirelessandtypinginthename.

ConfiguringthesecuritytypeThesecuritytypeconfiguredonthecontrollermustmatchthesecuritytypeconfiguredinyourwireless router. The Hydrawise unit can attempt to automatically detect this if you chooseAutoDetectasthesecuritytype.

Hydrawisesupportsthefollowingsecuritytypes–

• Open• WPAPersonal• WPA2Personal• WPAAuto

AfterchoosingthesecuritytypepresstheConfirmbutton.

SettingyourpasswordFor any security mode (except for Open) your wireless router password must be entered.Wirelesspasswordsareaminimumof8charactersandarecasesensitive.

AftertypinginyourpasswordpresstheOKbutton.DonotpresstheHomeorBackbuttons–theseoptionswillnotsaveyourpassword.

You must click OK when done


Wireless Connection Status Messages Thecontrollerwillshowdifferentstatusmessageswhilstconnectingtoyourwirelessrouter.

LookingforWireless… Controlleriscurrentlyscanningforlocalwirelessnetworks.

Connectingto… Controlleriscurrentlytryingtoconnecttoyourwirelessrouter.

WaitingforIP Controller has connected to your wireless router and is waiting foryourwirelessroutertogiveitanIPaddress.YourwirelessroutermustbeconfiguredasaDHCPserver.

Connected All is good. Controller has successfully connected to your wirelessrouter.

LocalConnectionOnly Controllerisactingasalocalwirelessrouter

Troubleshooting Wireless Connection Issues After entering your wireless settings, the controller will connect to your access point. Theconnectionprocesstakesabout30seconds.

UponsuccessfulconnectionthewirelessstatuswillshowConnected.

Ifyourcontrollerfailstoconnecttoyourwirelessroutercheckthefollowing–

• Yourpasswordisenteredcorrectly.Itiscasesensitiveandmustbeatleast8characterslong.

• Checkthatthewirelesssecuritytypesmatchbetweenthecontrollerandyourwirelessrouter.HydrawiserecommendsuseofWPA2securitybetweenthecontrollerandyourwirelessrouter.

• WehaveadditionaltroubleshootingstepsintheSupportsectionofourwebsite.

Viewing Controller Status From theHomescreen navigate to theController StatusbypressingStatusèControllerStatus.

The controller status screen shows your controller’s connection to Hydrawise servers forsynchronisingscheduleandweatherinformation.

ServerStatusAsuccessfulconnectiontotheHydrawiseserversisindicatedbySync’dastheServerStatus.

Differenttypesofstatusmessagesareshownbelow–

Sync’d Allisgood.ControllerhasaconnectiontoHydrawiseservers.

Connection to Hydrawise Success Rate

Status of Connection to Hydrawise Servers

Your Serial Number. Used to link your controller to your account


NoInternet Controller has connected towireless but is unable to connect to Hydrawiseservers. Check that your internet isOK by connecting another device to thesamewirelessrouter.IfthisisOKthengotoStatusèNetworkandselectTestNetworktoperformadiagnosticstest.

WirelessDownController has not connected successfully to your wireless. Go toSettingsèWirelessSettingstocheckthewirelessstatus.

Checking ThecontrollerischeckingconnectiontoHydrawise.

ErrorXXX ThecontrollerreceivedanerrorwhilstconnectingtotheHydrawiseserver.

SuccessThesuccesspercentageshowsthepercentageoftimethecontrollersuccessfullyconnectstoHydrawiseserverstosynchroniseweatherandschedulerelatedinformation.

Alowsuccesspercentagewillindicateapoorwirelessconnectionbetweenthecontrollerandyouraccesspoint.

Toimproveyourwirelesssignalstrengthyoucouldtrythefollowing–

• Movethecontrollerclosertoyourwirelessrouter.• Removeanyobstaclesinadirectlineofsightbetweenthecontrollerandyourwireless

routersuchasmetalitems(metalisanextremelygoodisolatorforWiFisignals).• Moveyourwirelessrouterclosertothecontroller.• Installahighergainantennaonyourwirelessrouter.• UseEthernettoalocationclosertothecontrollerandinstallanewwirelessrouter.• ConsideraWiFirepeaterbetweenyourwirelessrouterandtheHydrawisecontroller

toboostthesignalstrength.• Considermovingthecontrollerawayfrompotentialsourcesofinterference,including

• Microwaveovens• Cordlesstelephonesoperatinginthe2.4GHzrange–youcouldalsochangethe

channelyourphoneuses• Nearbybasestationsusingadjacentchannels

NotethattheHydrawiseunitisdesignedtoworkinpoorwirelessenvironments.However,ifyouwishtomanuallyrunorstopazoneandthewirelesssignalisdownthentheseactionswillfail.

OfflineModeIfthecontrollerlosesinternetformorethan24hoursyou’llreceiveanotificationemail.

Thecontrollerwillgointoanofflinemode. Inofflinemodeyourcontrollerwon’tbeabletoaccesslocalweatherconditionssuchasrainfallorevaporationandwillreverttoapre-definedprogram.

• ForSmart(ET)Wateringzones,thecontrollerwilladjusteachzone’swateringlengthbasedonyourofflinewateringbudgetandwillwaterateachzone’sconfiguredpeakwateringfrequency.


• ForTimeBasedwateringzones,thecontrollerwilladjusteachzone’swateringlengthbased on your offline watering budget and will water at each zone’s configuredwateringfrequency.

• NotethatCycle&SoakisnotsupportedinOfflineModeandeachzonewillwaterforitsfullwateringlengthwithoutpausing.

• ThecontrollerwillonlywateratyourconfiguredProgramStartTimes.

SavingSettingsThecontrollerdoesn’thaveabatterybackup–settingsarestoredinnon-volatileRAMwhichispreferableasbatteriesneedtobeperiodicallyreplaced.

SerialNumberThe serial number is used to link your actual controller with your Hydrawise account. Thisnumberisalsoprintedontherearofthecontroller.

Viewing Network Information and Testing Internet Connectivity From the Home screen navigate to the Network Status by pressing StatusèControllerStatus.

All settingson thispageareprovided to the controllerby yourwireless routerwhen it firstconnectsviaaprotocolknownasDHCP.Ifanyofthesesettingappearincorrectpleasechangetheminyourwirelessrouter.

Once the controller has successfully connected to your wireless router the Test Networkbuttoncanbeused to testnetworkconnectivity for troubleshootingpurposes.Thenetworktestwillverifyconnectivityto4destinations–

CheckingWiFi PerformsapingtesttotheGatewayaddresslistedintheNetworkStatusscreen.Ifthistestfailscheckthatyoudon’thaveMACaddressfilteringenabledonyourrouter.

CheckingDNS Performs a ping test to the DNS address listed in the Network Statusscreen. If this test fails check that the DNS address is correct – if it iswrong then correct the DNS address under DHCP Settings on yourwireless router. It is possible that this test may fail if the DNS serverdoesn’tnotacceptpingrequestswhichdoesnotindicateanissue.

CheckingInternet PerformsapingtesttotheGoogleserveratIPaddress8.8.8.8.Thisisawell known serverwhich accepts ping requests on the internet. If thistestfailsthenitindicatesanissuewiththeinternetconfigurationofyourwirelessrouter.

Network Test Button

IP Address (set by your wireless router)

DNS Address (set by your wireless router)


CheckingHydrawise Performs a ping test to the Hydrawise servers. If this test fails then itmay indicate an issuewith the internet configuration of your wirelessrouter.

Viewing Time and Date TimeanddatesettingsaresynchronisedwiththesettingsthatyouconfigureintheHydrawiseapp.Thetimezoneissetbasedonthelocationyouenteredduringtheappwizard.

OperatingZonesFromtheController

Zone Summary FromtheHomescreen navigatetotheZoneSummaryscreenbypressingZones.

TheZonesummaryscreenshowsthestatusof6zonesatatime.ToviewthenextorpreviousgroupofzonesusetheNextandPreviousbuttons.Thecurrentrangeofzonesthatyouareviewingisindicatedatthetopofthescreen.

Eachzoneiscolorcodedtoindicatethecurrentstatusofthezoneasfollows–

Green Zoneisscheduledtorunatsometimeinthefuture.

Grey Thiszoneisnotscheduledtoruninthefuture.

Blue(dark) Zoneiscurrentactive.

Blue(light) Zone is waiting for another zone to finish watering and then will startimmediately.

Gold Thiszoneisamasterzone.

BLUE indicates that this zone is currently running

GREEN indicates a zone with a scheduled runtime

Range of Zones you are viewing

GOLD indicates a Master Valve (if configured)

GREY indicates a zone without a scheduled runtime

View Next 6 Zones (if available)

View Previous 6 Zones (if available)


Viewing Zone Information FromtheZoneSummaryscreentouchthezoneyouwishtoview.

TheZoneStatusscreenallowsyoutoviewthefollowinginformation–

ZoneName ThisisthenameoftheZoneyou’veconfiguredintheHydrawiseapp.

Sensor ThecurrentsensorstateifconfiguredintheHydrawiseapp.

WaterUsage Water usage for this zone run. This is only shown if you have a flowmeterinstalledandthezoneiscurrentlyrunning.

Current Indicatesthecurrentthatallsolenoidsareusing(includingamastersolenoidifconfigured). Generally speaking, this value ranges from 200mA to 600mAdependingonthenumberofsolenoidsattachedtoasinglezoneoutput.Thecontrollerhasabuilt-in failsafetoautomaticallystopyourzone ifmorethanapproximately 800mA is detected as this may indicate a faulty solenoid orwiring.

TheZoneStatusscreenalsoallowsyoutomanuallystartazoneusingtheRunNowbutton.When started, the zone will run for the zone’s default configured run length. This can beoverriddenbyclickingonRunTimepriortomanuallystartingthezone.

When a zone is running the Run Now button will change to Stop, allowing you to stop arunningzone.

HydrawiseAppConfigurationBelowisaquicklistofstepstogetyourcontrollerconnectedtoyourHydrawiseapp.

Thisguidecoverssomeconfigurationofyourirrigationsettingsintheapporviathewebsite.PleaseseeourHow-Toguidesonlineathttps://support.hydrawise.com/formoreinformation.

Register for an account online 1. If you have not already done so, create an account at the Hydrawise web site. Go to

http://hydrawise.com/try-nowandregisterforanaccount.

Type of Watering Schedule

Zone Name

Current Zone Number

Water Usage (if configured)

Current measured for Zone(12 Zone Pro only)

Press to Start or Stop To Manually Modify a Zone

Sensor State (if configured)

Next Run Time and Length


Log into your account 2. Log intoyouraccount. If this is the first timethatyouhave logged inyouwillbeguided

throughasetupwizardtohelpyouwithinitialconfigurationofyourcontroller.

SettingtheControllerModelThewizardwillaskyoutochoosethemodelofyourcontroller.YoucansearchbySKUorsimplyselectthemodelfromthelist.

Ifyou’resettingupatrialaccount,choosetheclosestmodeltotheoneyouwant–youcanalwayschangeitlater.

SettingtheControllerNameandSerialNumberThewizardwillaskyoutogiveyourcontrolleranameandalsotoentertheserialnumber.Ifyou’resettingupatestaccountandyoudon’tyethaveacontrolleryoucan leavetheserialnumberblank.

ControllerLocationSettheaddresswhereyourcontrollerislocated.Yourcontrollerwillusethisaddressforweatherforecasts.


WhenyouclickUpdateAddressyouwillseelocalweatherstationsthatyoucansubscribeto.

You can subscribe to one or more weather stations by clicking on them and choosingSubscribe.Theweatherstationsthatyou’vesubscribedtowilldisplayinblue.

You can subscribe to one of the two closest airport stations for free – these will beupdated daily. If you have an Enthusiast plan you can subscribe to up to 5 personal,airport or other official stations. The advantage of subscribing to multiple weatherstations is that the results will be evaluated to remove any particularly high or lowreadingswhichmightbeinaccurate.

ConfiguringtheMasterValveIf your irrigation systemhas amaster valve then configure it here. Formoredetails onwhatamastervalveisseeConfiguringaMasterValve.


AddingZonesNowyoucanaddthezonesforthevariouspartsofyourgarden.Formoredetailonhowtoaddzones,seeAddingaZone.

SettingProgramStartTimesThe laststep inconfiguringyourcontroller is tosetupyourProgramStartTimes.Thesewilltellyourcontrollerwhenit’sallowedtowater.Youcansetspecificdaysoftheweekor use odd/even watering days. You can also set the time of day and then link theprogramstarttimestoparticularzonesandschedules.


Yourcontrollerisnowconfiguredandreadyforuse.

Link your controller to your account YoumustlinkyourHydrawisecontrollertoyouraccountbeforeitwillstartwatering.

Ifyouenteredyourcontroller’sserialnumberduringthewizardthenyourcontrollerisalreadylinkedandyoudon’tneedtofollowthesesteps.

1. IntheHydrawiseApporwebbrowser,gotoyourDashboard.ClickontheSettingsicon ontheblue‘WateringSchedule’barandthenclicktheLink to controllermenuitem(seebelow).

2. Entertheserialnumberofyourcontroller.TheserialnumbercanbefoundontherearoftheunitorontheController StatusscreenintheHydrawiseunit.

ConfiguringYourControllerfromtheApporWebsiteForeachzoneyoucanchoosefromSmart(ET)wateringorTimeBasedwatering.


Time Based Watering ForTimeBasedwateringyoudecidethewateringfrequencyandlength,eitherbyenteringtheinformationdirectlyorchoosingapreconfiguredwateringschedule.ThecontrollerwillusetheWateringTriggersyou’vesettoautomaticallyadjustitswateringschedule.

Smart (ET) Watering Smart (ET) watering is an automated watering schedule that uses information aboutenvironmental conditions to ensure your plants get the optimum amount of water.Evaporation will draw moisture from your garden, while rainfall and irrigation will addmoisture.UnderstandingtheseconditionsallowsHydrawisetodecidewhenthetimeisrighttowateryourgarden.ETstandsforevapotranspirationandisexplainedfurtherinthediagrambelow.

Foreachzone,we’llaskyoutospecifythewateringlengthandpeakwateringfrequency:

• Thewateringlengthishowlongwateringneedstoruntofullywateryourzone.• Thepeakwateringfrequencyishowoftenyouwouldnormallywaterthiszoneduring

yourpeakirrigationperiod.

Thecontrollerwill varyyourwatering frequencybasedonactualevaporationand rainfall inyourareaonadaytodaybasis.

Adding a Zone ToaddanirrigationzonenavigatetotheZones&SchedulespageinyourHydrawiseaccountandclickonAddaNewZone.TheZonewizardwillbedisplayed.

Readily available water

Precipitation

AbsorptionEvaporation

Transpiration

Evapotranspiration

Determined by -TemperatureHumidityWindSoilPlant type

Root depthAvailable water


FillintheZoneDetails:

ZoneName Use a meaningful name for each irrigation zone. Zone names aredisplayedontheHydrawisecontrollerandareusedinyourHydrawiseaccounttoshowruntimesandallowmanualmodificationofwateringschedules.

ZoneNumber The zone number for each irrigation zone shouldmatch the numberyouhaveusedwhenwiringthecontroller.

ZoneIcon Choose an icon which will be used to display the zone on thedashboard.

WateringType Select a watering mode for this zone. A zone can use Smart (ET)wateringorTimeBasedwatering,whicharedescribedbelow.

Dependingonthetypeofwateringyouchose,fillinthedetailsforSmart(ET)wateringorTimeBasedwatering.

Smart(ET)WateringWateringType Choosewhethertosettheinformationmanuallyorchoosefromalist

ofpreconfiguredwateringschedules.

• Enter Time and Frequency: allows you to manually set thewateringlengthandfrequency.


• Use a preconfigured Watering Schedule: add a preconfiguredwatering schedule or use one you’ve previously created. If yourcontrollers are managed by a contractor, you may seepreconfiguredwateringschedulesthatyourcontractorhascreated,whichyoucanalsouse.

EnterTimeandFrequency

Ifyouchoosetoenterthetimeandfrequency,thefollowingfieldsareavailable:

WateringLength The number of minutes this zonewillrunforeachtime.

PeakSeasonWateringFrequency How often the zone will normallyrun during your peak irrigationperiod. This frequency will beautomatically adjusted throughoutthe year based on actualevaporationandrainfall.

UseaPreconfiguredWateringSchedule

IfyouchoosetouseapreconfiguredWateringScheduleyoucaneitherchoose from a list of schedules you’ve previously created, or add apreconfigured watering schedule by entering the watering length andfrequencyandschedulemodifications.Ifyourcontrollersaremanagedby a contractor, you may see preconfigured watering schedules thatyourcontractorhascreated,whichyoucanalsouse.

NotethattheScheduleAdjustmentoptioninapreconfiguredWateringScheduleisnotusedforSmart(ET)wateringzones.

CycleandSoak CycleandSoakistheabilitytobreakthewateringtimeforazoneintoperiodsofwatering(cycle)andpause(soak)toallowthewatertosoakintothesoilwithoutrunoff.

YoucanenableordisableCycleandSoak.Ifyouenableit,youneedtospecifythecycleandsoakperiods:

• CycleTime:themaximumnumberofminutesthezonecanrunfor

• Soak Time: theminimum time between zonewaterings to allowthewatertosoakintothesoil

Tuning Adjust thewateringtimefor thiszonefromthecalculatedtime. Thisallowsyou to fine tuneyourwatering if your zoneappears tobe toodryorwet.

TimeBasedWateringWateringType Choosewhethertosettheinformationmanuallyorchoosefromalist

ofpreconfiguredwateringschedules.


• Enter Time and Frequency: allows you to manually set thewateringlengthandfrequency.

• Use a preconfigured Watering Schedule: add a preconfiguredwatering schedule or use one you’ve previously created. If yourcontrollers are managed by a contractor, you may seepreconfiguredwateringschedulesthatyourcontractorhascreated,whichyoucanalsouse.

EnterTimeandFrequency

Ifyouchoosetoenterthetimeandfrequency,thefollowingfieldsareavailable:

WateringLength The number of minutes this zone will run foreachtime.

WateringFrequency Choosehowoftentowaterthezone.

ScheduleAdjustment Choose how to adjust the watering time basedonyourweathertriggers.

UseaPreconfiguredWateringSchedule

IfyouchoosetouseapreconfiguredWateringScheduleyoucaneitherchoose from a list of schedules you’ve previously created, or add apreconfigured watering schedule by entering the watering length andfrequency and schedulemodifications asper the fields above. If yourcontrollers are managed by a contractor, you may see preconfiguredwateringschedulesthatyourcontractorhascreated,whichyoucanalsouse.

CycleandSoak CycleandSoak is theabilitytobreakthewateringtimeforazone intoperiodsofwatering(cycle)andpause(soak)toallowthewatertosoakintothesoilwithoutrunoff.

YoucanenableordisableCycleandSoak. Ifyouenable it,youneedtospecifythecycleandsoakperiods:

• CycleTime:themaximumnumberofminutesthezonecanrunfor

• Soak Time: theminimum time between zonewaterings to allowthewatertosoakintothesoil

Tuning Adjust thewatering time for this zone from the calculated time. Thisallowsyoutofinetuneyourwateringifyourzoneappearstobetoodryorwet.

Configuring a Master Valve Amastervalveisanautomaticvalvethatisinstalledatthepointwheretheirrigationsystemconnects to thewater supply. (Sometimes this circuit is called a “pump start circuit”. Bothtypesofcircuitsworksimilaroridentical,andcanbeusedforapumpand/oramastervalve.)Thecontrollerturnsthemastervalveonandoff.


Howdoesitwork?Zone valves are the individual valves that operate a group of sprinklers or drip emitters.Typicallyonezonevalveisturnedonatatime,andcontrolstheirrigationinaspecificareaofyourgarden.Wheneveroneoftheirrigationzonevalvesistoldtoopenbythecontroller,thecontrolleralsosignalsthemastervalvetoopen-themastervalveactslikeabackupvalve,ora fail-safe valve. The purpose of themaster valve is to shut off thewater to the irrigationsystemwhennoneofthezonevalvesareoperating.

The image below shows a master valve operating connected to Zone 12 on a Hydrawisecontroller.

Howisitconfigured?With aHydrawise controller, any one of your ordinary zones can be configured to act as amastervalve.

The master zone is configured on theZones & Schedules page underneath your list ofirrigationzonesashighlightedintheimagebelow.


Initially there is nomaster valve configured and all zones on the controller can be used asnormalzonevalves.ToselectamasterzonejustclicknexttothetextwhichsaysMasterValveandchoosethezonenumberyouwilluseasamastervalve.

Configuring Program Start Times Yourcontroller'swateringProgramStartTimesspecifywhenyourcontrollerispermittedtodoany watering. If multiple zones are using the same Program Start Time then they will bestartedinsequence.

To add a program start time navigate to the Zones & Schedules page in your HydrawiseaccountandclickonAddWateringTime.

StartTime EnterthetimeforthisProgramStartTime.

WateringType Choose the watering type for this Program Start Time. Forexample,chooseoddorevenweeks.

WateringDays Choose which days this Program Start Time applies to. Forexample, chooseoddorevendays,or select specificdaysof theweek.


ThenselectthezonesthatthisProgramStartTimeappliesto. Eitherapply ittoallzonesorselectfromalistofzonesorPreconfiguredWateringSchedules.


Configuring Preconfigured Schedules PreconfiguredWateringSchedulesallowyoutogrouptogetherzoneswithidenticalwateringproperties.

Each PreconfiguredWatering Schedule determines how long a group of zoneswill run andhowthescheduleshouldbemodifiedbasedonyourlocalweather.ZoneswillonlywateratyourdefinedProgramStartTimes.

To add a preconfiguredwatering schedule navigate to the Zones& Schedules page in yourHydrawiseaccountandclickonAddWateringSchedule.

ScheduleName Givethescheduleaname.

RunTime Choose how long each irrigation zone associated with thisPreconfiguredWateringSchedulewillrunfor.

RunFrequency Choose how often each irrigation zone associated with thisPreconfiguredWateringSchedulewillrunfor.

ScheduleModification SelecthowthewateringscheduleforthisPreconfiguredWateringSchedule ismodifiedbasedontemperatureandrainfall. Note: ifyouapply thiswatering schedule toa Smart (ET)Watering zone,theschedulemodificationisnotused.

Viewing Preconfigured Watering Schedules

YoucanseeallyourpreconfiguredwateringschedulesontheZones&Schedulespage.

If your controllers aremanaged by a contractor, youmay also see preconfigured wateringschedulesthatyourcontractorhascreated.Thesewillhaveagroupsymbolnexttothemashighlightedbelow.Youcanusethesepreconfiguredwateringschedulesbutyoucan’teditordeletethem–onlythecontractorcandothat.

Configuring Sensors Hydrawisesupportstwotypesofsensors:


1. Flowsensors(meters)whichmeasurewaterusageforanirrigationzone(orzones).2. Rainsensorsormoisturesensorswhichallowyoutosuspendwateringcyclesforazone(or

zones).

FlowMetersFlowmeters measure the amount of water going onto each zone. This is really useful forunderstandingwaterusageandmonitoringissuessuchasbrokenpipesorzonesnotrunning.

Hydrawisereportingallowsyoutoseehowmuchwaterisusedforeachzoneandhowmuchwaterisusedacrossyoursystem.

Withaflowmeteryoucanalsocreatealertsforflowissueswhichwillkeepyouuptodateonwhat’s happening – particularly important for unattended homes. See Creating Alerts formoreinformation.

Rain/MoistureSensorsHydrawisealsosupportsstandardopen/closedcontactrainsensorsandsoilmoisturesensors.Infact,youcanuseanygenerictypeofsensorwhichhasaopen/closecontact.

Thesesensorsuse2wiresandareusuallylabelledasnormallyopen(sometimescalledNO)ornormallyclosed(sometimescalledNC).

Arainormoisturesensorisusuallyusedtostopirrigation,howeveryoucanalsocreateyourowncustomsensortypestostart irrigationorforotheradvancedapplications.SeeCreateaCustomSensorformoreinformation.

SensorConfigurationThereare2stepstogetyoursensorworkingforeachofyourzones:

1. CreateanewsensorinyourHydrawiseaccountunderSensors.

SensorName Givethesensoraname.

TypeofSensor ChoosethetypeofsensororCreateaCustomSensor.Standardsensortypesare:

Flowmeterwith¾inchcoupling

AHydrawise¾inchflowmeter

Flowmeterwith1inchcoupling

AHydrawise1inchflowmeter

RainSensor(NormallyClosed)

A standard rain sensor – use this if you havewired the rain sensor’s normally closed wire tothecontroller

RainSensor(NormallyOpen)

A standard rain sensor – use this if you havewiredtherainsensor’snormallyopenwiretothecontroller

SoilMoistureSensor(NormallyClosed)


Astandardsoilmoisturesensor–usethis ifyouhave wired the soil moisture sensor’s normallyclosedwiretothecontroller

SoilMoistureSensor(NormallyOpen)

Astandardsoilmoisturesensor–usethis ifyouhave wired the soil moisture sensor’s normallyopenwiretothecontroller

Controller Choosethecontrollerthatthesensoriswiredto.

ControllerInput Choose the input on the controller that thesensoriswiredto.


2. Onceyou’vecreatedyoursensor,choosethezoneswhichwillusethesensor.

CreateaCustomSensorYoucanalsocreatecustomsensorsinyourHydrawiseaccountunderSensors.

Someexamplesofcustomsensortypesare:

• AflowmeterofadifferentsizetothestandardHydrawiseflowmeters.• Asensortoconformtowateringrestrictionswhichspecifythatzonesmustnotwater

foraminimumperiodoftimeafterrainisdetected.• Asensortostartirrigationifmotionisdetected(Enthusiastplanonly)

ToaddacustomsensortypegotoSensorsandclickonAddCustomSensorType.

SensorName Givethesensoraname.

TypeofSensor Choosethetypeofsensor.

FlowMeter

Litresperpulse The number of litres ofwater expected topass through the flow sensor per flowmeter pulse (you can get this informationfromyourflowmeter’sspecifications)

NormallyOpenSensor/NormallyClosedSensor

SensorAction Whetherthesensorshouldcauseazonetostartorstop.

StartaZone

If the zone should start, choose theminimum number of seconds before thesensor can cause the same zone to startagain.


StopaZone

Ifthezoneshouldstop,choosethenumberofsecondsdelaybeforestoppingthezone,andhowlongthezoneshouldbedisabled.

For example, some watering restrictionsrequire that if rain is detected, sprinklersshouldnotrunforatleasttwodays.

Setting Watering Triggers YoucanconfigurewateringtriggersforeitherTimeBasedwateringorSmart(ET)watering.

ToconfigureyourpredictivewateringtriggersclickonWateringTriggers.

Triggers for Time Based Watering


Youcansuspendwateringbasedoneitherforecastoractualweatherdata.Youcanalsovarytheamountofwateringaccordingtotheforecasttemperature.

SuspendWatering–WeatherForecastsForecastTemperature Choosetosuspendwateringwhentheforecasttemperature is less

thanthespecifiedamount.

ForecastRainfall Choosetosuspendwateringwhentheforecastrainfallishigherthanthespecifiedamount.

ForecastWindSpeed Choosetosuspendwateringwhentheforecastwindspeedishigherthanthespecifiedamount.

SuspendWatering–WeatherStationMeasurementsActualRainfall24hr Choose to suspend watering when the rainfall over the past 24

hoursishigherthanthespecifiedamount.

ActualRainfall7days Choosetosuspendwateringwhentherainfalloverthepast7daysishigherthanthespecifiedamount.

VariableWateringWaterLess Choose to water a certain percentage less when the forecast

temperatureislessthanthespecifiedamount.

Note:tochangethewateringpercentage,clickonthenumbernexttothe%sign.

WaterMore Choose to water a certain percentage more when the forecasttemperature is higher than the specified amount and the forecasthumidityisbelowthespecifiedamount.

Note:tochangethewateringpercentage,clickonthenumbernexttothe%sign.

Triggers for Smart (ET) Watering

Usingforecastevapotranspirationhelpstopredicttherightwateringscheduleforyourzones,givingyouamoreaccuratepictureofwhenthezoneswillnextrun.

Youcanchoosewhetherornottousetheforecasttemperaturetopredictsmart(ET)watering,andwhetherornottouseforecastrainfalltodelaysmart(ET)watering.


Schedules will be estimated up to 30 days from today based on forecast and historicaltemperatures and rainfall. The predicted schedules will be progressively updated each daybasedonactualweatherconditionsandnewforecasts.

Yourwatering schedule is updated based on actualweather conditions shortly before yourfirstProgramStartTimeeachday.

Creating Alerts Youcancreatealertstokeepyouuptodateonwhat’shappeningwithyourcontrollers.

Alertscanbecreatedtotrackwaterflowordetectfaultysolenoidwiring.

AlertTypesAlertType Description Requirement

Highwaterusageforazone Set a percentage to generate an alertwhen thezone'swaterusagerateisthatmuchhigherthantheprevioustimethiszoneran.

FlowMeter

Lowwaterusageforazone Set a percentage to generate an alertwhen thezone'swaterusagerate is thatmuch lower thantheprevioustimethiszoneran.

FlowMeter

Highwaterusagewithnozonesrunning

Set a number of litres/gallons to generate analert when that amount of water usage isdetectedwhennozonesarerunning.Thisalertistypicallygeneratedwithin5minutesoftheeventhappening.

FlowMeter

Highwaterusageoverthepasthourwithnozonesrunning

Set a number of litres/gallons to generate analert when that amount of water usage wasdetected over the previous hour and no zonesarerunning.Thisalertistypicallygeneratedeachhourandcanbeuseful fordetecting slowwaterleaks.

FlowMeter

Interruptedwaterusageatanytime

Set a number of litres/gallons to generate analert when the average water is less than thatamount.This is most useful when you need to monitorcontinually running water. This alert is typicallygenerated within 15 minutes of the eventhappening.

FlowMeter

Interruptedwaterusageover Set a number of litres/gallons to generate an FlowMeter

Note

Ifyourcontrollersaremanagedbyacontractor,thecontractormaycreatealertsforyourcontrollers.You’llseethesealertslistedalongwithanythatyou’vecreatedbutyouwon’tbeabletoeditthem–onlythecontractorcandothat.

Lookoutforthe symboltoseealertscreatedbyyourcontractor.


thelasthourwithnozonesrunning

alertwhentheaveragewateruseinthelasthourislessthanthatamount.This is most useful if you have zones that runeveryhour.This alert is typically generated each hour andcanbeusefulfordetectingslowwaterleaks.

Wiringshort(highcurrent)toyoursolenoid

Generateanalertforhighsolenoidcurrentwhenazoneisrunning,whichmaybecausedbyfaultywiringorfaultysolenoidvalve

Controllersupportingsolenoidcurrentmeasurement

Brokenwiretoyoursolenoid Generate an alert when there is no solenoidcurrent when a zone is running, which may becausedbybrokenwiringornonexistentsolenoidvalve

Controllersupportingsolenoidcurrentmeasurement

AppliesToYoucanapplythealerttoallyourcontrollersortoaselectionofcontrollersand/orsensors.Tochooseaselectionofcontrollersand/orsensors,choose“Selectedcontrollersorsensors”fromthedropdownlistthendouble-clickoncontrollersandsensorstomovethembetweenthe“available”listandthe“selected”list.

Ifanalertisaddedtoacontroller,itwillbeappliedtoallsensorsforthatcontroller.Ifanalertisaddedtoasensor,itwillonlybeappliedtotheselectedsensor.

AlertActionsAddEventtoEventLog Add the alert to your event log which you can view under

Reports.Thisoptionisalwaysselected.


SendAppNotification SendanotificationtoanyAppleorAndroiddeviceyouhavetheHydrawiseappinstalledon.

Note: ifyousee(appnotvalidated)inthedropdownlist,thatmeans you have not logged into any valid device using yourHydrawise app. You need to log into your Hydrawise app atleastonceonthedevicebeforethenotificationcanbesenttothatdevice.

To testalerts foryourAppleorAndroiddevicepress theSendTestbutton.

PleasenotethatAppleandGoogledonotguaranteedeliveryofall app notifications to your device, for example in situationswhere your phone is uncontactable for an extendedperiodoftime or where multiple app notifications are sent in a shortperiodoftime.

SendSMSNotification Send an SMS to the specified mobile number (this featurerequiresanEnthusiastplan).

TotestalertsforyourcellphonepresstheSendTestbutton.


MonitoringThereareanumberofwaystokeepaneyeonyourcontroller,includingthedashboard,reportsandconfiguration.

Dashboard Fromthedashboardyoucan:

1. Findzoneinformationandstart,stopandsuspendzones2. Seetemperatureandrainfallobservations3. Seetheweatherforecast4. Seeandaddsensors5. Seeyourcontroller’sstatus6. Viewadifferentcontroller

Zone Information

Allyourzonesarelistedhere.Tofindmoreinformationaboutazone,clickonthezone.

Thiswillshowwhenthezoneisnextscheduledtorunandforhowlong,aswellaswhenitlastran.


To run a zone, click thePlay button. Youwill be prompted to run the zone for its normalwateringtimeortochooseacustomtime.

To suspend a zone, click the Pause button. You will be prompted to choose when thesuspension should end. Once a zone is suspended itwill display in a lighter colour on thedashboardandyoucanclickthePausebuttonagaintoremovethesuspension.

To display zone information, click the information button. This will display informationincludingthenextwateringtime,wateringfrequencyandprogramstarttimes.


Temperature and Rainfall

Alltemperatureandrainfallvaluesarecalculatedasthemedianofyourweatherstations.

Forexample, ifyouaresubscribedto3weatherstations, thetemperatureorrainfallwillbethemiddlevalue.Ifyouaresubscribedto4weatherstationsitwillbehalfwaybetweenthetwomiddlevalues.

3weatherstations:

• Ifyourweatherstationsrecordmaximumtemperaturesof23,25and27degrees,themedianwillbe25degrees.

4weatherstations:

• Ifyourweatherstationsrecordmaximumtemperaturesof23,25,27and29degrees,themedianwillbe26degrees.

Ifyourtemperatureorrainfallreadingsareconsistentlyshowingalowvalue,gotoReportsancheckeachweatherstationrainfallortemperatureandadjustthemaccordingly.

TemperatureFor customers on an Enthusiast plan this will show you the current and maximumtemperaturesfortoday.Thisisbasedonthemedianvalueofalltheweatherstationsyouhaveselected.

RainfallThispanelwillshowyoutheamountofrainwhichfellyesterdayandinthepastweek.Thisisbasedonthemedianvalueofalltheweatherstationsyouhaveselected.


IfyouhaveanEnthusiastplan,insteadofyesterday’srainfallyouwillseerainfallforthepast24hours.

Forecast

This areawill show forecast temperature andweather conditions, including the percentagechanceofrainfall,expectedhumidityandexpectedaveragewindspeed.

Sensors

Thisareawillshowanysensorsyouhaveconfiguredandwillalsoallowyoutoaddasensor.

Controller Status

This areawill display the status of your controller. If the controller is online youwill see agreencirclewitha tick, andyoucanhoverover this to see the last time thecontrollerwassynchronised.Ifthecontrollerhasbeenofflinefor30minutesormorethenyouwillseearedtrianglewithanexclamationmark.Ifyourcontrollerremainsofflinefor24hourswewillsendyouanemail.

Changing your Current Controller

Fromthemenu,choosetheControllerlink.

Choosethecontrolleryouwanttoview.

Thiswillgiveyoua listofall thecontrollers inyouraccount.Clickonthecontrollernametochangetoconfiguringthatcontroller.

Reports YoucanaccessreportsforyourcontrollersbyselectingReportsfromthemainmenu.

Usethesettingsatthetopofthescreento:

• Changethedaterangeforthereport• Clearallreportdata• DownloadareporttoExcel• Refreshareport

ReportName Description

WateringSchedule Shows thescheduledwatering time foreachzone.Youcan


hover over each schedule to see more details about theplannedwatering.

WateringHistory(Actual) Shows actual completedwatering time for each zone. Youcanhoverovereachwateringtimetoseemoredetailsaboutthewatering.

WeatherForecast Show the historical weather forecast plus the next 3 daysforecast.Youcontrollerwillusethis forecast toadjustyourwateringschedule.

WeatherStationTemperatures Shows daily maximum temperatures for each weatherstationthatthecontrollerissubscribedto.Youcanclickontheweatherstationnamesatthebottomofthereporttoshowtheirinformationinthereportorexcludeit.Hoveroveranytemperaturebar tosee further informationincluding the relevant time period and rainfall for thatperiod.

WeatherStationRainfall Shows daily rainfall for each weather station that thecontrollerissubscribedto.Youcanclickontheweatherstationnamesatthebottomofthereporttoshowtheirinformationinthereportorexcludeit.Hoveroveranyrainfallbartoseefurtherinformation.

WeatherStationWindGust Shows wind gusts for each weather station that thecontrollerissubscribedto.Youcanclickontheweatherstationnamesatthebottomofthereporttoshowtheirinformationinthereportorexcludeit.Hoveroveranywindgustbartoseefurtherinformation.

Evapotranspiration(ET) Shows daily evapotranspiration for each weather stationthatthecontrollerissubscribedto.Youcanclickontheweatherstationnamesatthebottomofthereporttoshowtheirinformationinthereportorexcludeit.

WaterSaving Shows the estimatedwater saving for your controller overthelast7days.Duringcoldweatheryouwouldexpecttoseethis percentage increase due to reduced watering. Duringhot weather you would expect to see this percentagedecrease (and go negative) as the controller increaseswatering.

FlowMeterMeasurements If you have a flow meter installed, this report showsreportedflowforeachofyourcontroller’szones.

TotalWaterUsage Showsdailywaterusageasrecordedbyeachflowmeter.Also shows minimum and maximum water usage for anyflowmeteracrosstheperiodaswellastheaverageandtotal


waterusage.Youcanclickontheflowmeternamesatthebottomofthereporttoshowtheirinformationinthereportorexcludeit.Hoveroveranyflowmeterbartoseehowmanyzoneswereactiveatthetime.

FlowRates(perminute) If you have a flow meter installed, this report showsinstantaneous flow rates each time the controller recordsflow.Hover over any dot to see the flow rate and number ofzonesactiveatthetime.

SensorLevels If you have a rain sensor, moisture sensor or any other‘level’ based sensor configured this report will show thehistoricalstatusofyoursensor(openorclosed).

SmartWaterBalance Showstheirrigationbalanceforeachzoneonagivenday.Also shows the minimum and maximum irrigation balanceoverthereportperiod.Youcanclickonthezonenamesatthebottomofthereporttoshowtheirinformationinthereportorexcludeit.Hover over the graph to see information onevapotranspiration,rainfallandirrigationamounts.

MonthlyEvapotranspirationandRainfall

ShowsthehistoricalETandrainfallinyourarea.Thisdataisbasedona12yearaverage.

MonthlyTemperatureandRainfall Shows the historical temperature and rainfall in your area.Thisdataisbasedona12yearaverage.

Weather Stations

Tochangethelocationofyourcontrollerortheweatherstationsyou’resubscribedto,selectWeatherStationsfromthemenuinthetoprighthandcorner.

Hydrawisesupports2maintypesofweatherstations:


AirportWeatherStations Weather stations which are based at airports. These aregenerally highly reliable because they are maintained byprofessional organisations. These weather stations areavailabletoallusers.

PersonalWeatherStations These weather stations are maintained by amateurs. Thequalityofthesestationsvaries–somearegood,somearenotreliable. For this reason, these weather stations are onlyavailable to users on an Enthusiast plan and users arepermittedtoselectupto5weatherstationstoremoveissuesassociated with the quality of weather data from personalweatherstations

Configuration Tochangetheconfigurationofyourcontroller,selectConfigurationfromthemenuinthetoprighthandcorner.

Controller Settings

Hereyoucanseeyourcontrollersettingsandadd/removeaserialnumber.

Someconfigurationoptionsinclude–

ControllerName Thenameofyourcontroller


SerialNumber Thecontroller’sserialnumber.Click ‘RemoveSerial’toremovetheserialnumberandreplaceitwithanotherphysicalcontroller

NotificationEmail Theemailaddressnotificationsaresenttowhenthecontrollerisoffline,orHydrawiseneedtocontactyou(forexamplewhenyoursubscriptionplanisabouttoend)

Notify Theamountoftimethatyourcontrollerisofflineforbeforewenotifyyou

Units Theunitsusedforreports,alertsandelsewhereintheapp

InterZoneDelay Thenumberof seconds to insertbetweeneach zonewateringwhencalculatingscheduled

MasterValveDelay Theminimumnumberofsecondsthatthemastervalveshouldbeactivebeforeanyzonestarts

Hidepassword If set to yes, this will hide your wireless password on thecontroller.Ifyourcontrollerisinapublicallyaccessibleareawerecommendyouhideyourpassword.

Expansion Modules

Hereyoucanseeyourexpansionmodulesandwhentheylastmadecontact.Youcanalsoaddorremoveexpansionmodules.

Upto2expansionmodulescanbeaddedtoasinglecontroller.

WhenyouaddanexpansionmoduleyouwillneedtogiveitanameandspecifytheIDnumberthatyouselectedwhensettingupthemodule.

Offline Water Adjustments

Offlinewateradjustmentsallowthecontrollertoautomaticallyadjusttheamountofwateringonamonth-by-monthbasisifthecontrollerisinOfflinemode.


Setup Wizard Tochangethesetupofyourcontroller, selectSetupWizard fromthemenu in thetoprighthandcorner.Formoreinformationonthesetupwizard,seeHydrawiseAppConfiguration.

My Account Fromyouraccountscreenyoucan:

1. Updateyouraccountdetails2. Manageyourcontrollers3. Manageusers4. Managefiles

Account Details

Here you can change your password, change your plan and change your account visibilitysettings.

Bydefault,nobodyelsecanseeyouraccount.However, if youwanthelp fromaHydrawisecontractor thenyoucanchoose tomakeyouraccountvisible to thecontractorso that theycanhelpyouwithconfigurationortroubleshooting.

Youcanalsoregisterasacontractor.


Controllers

Hereyoucanseeasummaryofyourcontrollers.Youcanalsomanageordeleteacontroller.

Users

Hereyoucanseewhichusershaveaccesstomanageyourcontroller.Userscanhaveaccesstochangeconfigurationortojustviewconfiguration.

Note that this list is separate from any contractors which you have given access to underAccountDetails.

Youcanalsoaddordeleteauser.MultipleusersaresupportedforcustomersonanEnthusiastplan.


UserName Thenameofthenewuser

EmailAddress Theemailaddressthatthenewuserwillusetologintotheiraccount

TypeofUser Ifyouwanttheusertohavefullcontroloverthecontrollers,select“Canmodifyconfigurationandrunzones”

Ifyoudon’twanttheusertobeabletochangeconfiguration,select“Canviewconfiguration,manuallyrunzones”

ClickCreate–theuserwillgetanactivationemailandwhentheyvisittheirDashboardforthefirsttimetheywillneedtoselectapassword.

Files

Hereyoucanuploadfileswhichareusefulinmanagingyourgarden.Forexample,youmightlike toaddapicturewhichshowsthe layoutofyourgardenandzones.Uploadingof files issupportedforEnthusiastplancustomers.


ContractorsIf you’re a landscape or irrigation contractor a Hydrawise Contractor account with a Hydrawisecontroller can save you and your customers time and money. It offers automatic scheduleadjustmentsbasedoninternetweatherstationswithasimpletouseinterface.

Youcan:

• avoidonsitevisitsbyfixingyourcustomer’sirrigationfromyoursmartphoneortablet• storeirrigationorlandscapedesignsinyouraccountforeasyreferencelater • stopcustomersfrommakingchangestotheircontrollerwithoutyourpermission • manage thousands of different customers from the Hydrawise app and easily change

controllersettingsforanyofyourcustomerswithjust2clicks• seeallirrigationissuesfromoneinterface–manageyourcustomers’irrigation

HydrawiseContractoraccountsarefreeforupto5controllers.Youcancreate‘test’controllersonlinetoseehowitworks–there’snocommitmenttopurchase.

How to Register as a Contractor Toregisterasacontractoryou’llfirstneedtosignupforanaccount.Youcandothiswithoutpurchasingacontroller.

From the Hydrawise home page, click on Sign Upat the top of the page. Either fill in yourdetailsoruseyourFacebookaccounttosignin.

You’llgetan activationemail –onceyouclickonthe link intheemailyou’llbe invitedtogothrough a wizard to set up your first controller. At the end of the wizard, you’ll have theopportunitytosignupforacontractorplan.

ClickonSignUpNow-thiswillshowtheRegisterforaContractorPlanscreen.


If you chooseaplanwith an associatedprice you’ll be taken toPaypal topay for theplan.Thenyoucanenteryourbusinessdetails.


YourBusinessName Thenameofyourbusiness

ContactDetails Yourphonenumberoremailaddress

BusinessLocation Whereyourbusinessislocated

Website Yourbusinesswebsiteaddress

BusinessDescription Abriefdescriptionoftheservicesyouoffer

If youwould like your details to be available to Hydrawise customers, tick the “I wantmydetails listedonlinesocustomerscan findme”box.Nowthatyou’resetupasacontractor,youcaneitheraddacustomertoyouraccountoraskyourcustomers toselectyouas theircontractor–seeHowtoAddaCustomertoYourAccount.YourContractorSettingsshowhowyourdetailswilllooktoHydrawisecustomers.

1. ClickonSettings->MyAccount

Tochangethem,clickonChange.Eitherconfirmyourexistingplanorchooseanewone,thenupdateyourdetails.


The Hydrawise Contractor Portal HydrawiseaccountswithaContractorplanhaveadedicatedportalforcreatingandmanagingyourcustomersandcontrollers.

Togettoyourportalgoto Settings->MyCustomers. Ifyouhaven’talreadyregisteredforacontractorplanthenyoucandothathere,otherwise theportalwill showyoudetailsonallyourcurrentcustomers.

Dashboard

Thedashboardshowsyoukeyinformationaboutyourcustomersandtheircontrollers.

Thisincludesthetotalamountofwateringtimeforallyourcontrollersinthepastsevendays,as well as the percentage of water saved by using Hydrawise. You can see how manycustomersyouhave,includinganywhichareyettogiveyouaccesstoconfiguretheiraccount–theseshowaspending.Therearealsostatisticsonthecontrollersyoumanageandwhetherthey’reonlineoroffline.

You can also see recent alerts for your customers’ controllers – these are based on Alertswhichareconfiguredforyourcustomer’scontrollers.Toseeallevents(includinganyalerts),gotothe Customer Eventssection.


Customers and Controllers

Thissectionallowsyoutoconfigureallyourcustomersandtheircontrollers.Youcanalsoseeyourowncontrollers.

Whenyoufirstenterthescreenyou’llseealistofyourcustomers.Fromhereyoucanalsoaddacustomer.Customerswillbecolour-codedbythetypeofplantheyhave:

• GreenforaHomeplan• OrangeforanEnthusiastplan• BlueforaContractorplan

There’s also amapwhich shows all the controllers youmanageunless you’re using a smallscreen.Controllersonthemaparecolour-codedbytheirstatus:

• Green:online• Red:offline• Yellow:thiscontrollerisnotyetlinkedtoaphysicaldevice.Todoso,youcanconfigure

thecontrollerand attachaserialnumber.

Clickonacontrolleronthemaptoseestatusinformationandalsoconfigurethecontroller.

Youcanusethesearchboxtofindyourcustomersbyname,emailaddress,controllerstatusorserialnumber.Simplyclearthesearchboxifyouwanttoseeallyourcustomers.

Tomanageacustomer,eitherclickontheirnameorusethemenunexttotheirnametoshowtheirdetails. You canalsouse themenu to remove this customer fromyour account.Onceyou’relookingatacustomeryou’llbeabletoconfiguretheirplans,controllersandusers.


Customer Events

Thissectionshowsalleventsforyourcustomers’controllers,withthemostrecenteventsatthetop.Eventscanbeerrors,warningsorinformationandyoucanusethebuttonsatthetopofthesectiontofilterthetypeofeventsyouwanttosee.

If you don’t need to see the events anymore you can either clickAcknowledgenext to aspecificeventorclickAcknowledgeAllEvents.

Youcanchangethenumberofeventsshownonthepage.Youcanalsosearchforeventsbyarangeofinformationincluding:

• Customername• Controllername• Date• Eventinformationkeywords,e.g.“flow”or“usage”• Eventseverity


Customer Wide Settings

This section allows you to create settings which you can apply to one or more of yourcustomers.Thiswayyoucansavetimebycreatingcommonlyusedsettingsonceratherthanforeverycustomer.

GlobalAlertsIfyouhaveanalertthatyouwanttouseformultiplecustomers,youcancreateitoncehereandsimplyapplyittowhichevercustomersorcontrollersyouneeditfor.

Youcanalsoapplyanalertto“AllCustomers”,whichmeansitwillbeautomaticallyaddedtoanynewcustomersinthefuture.

WateringSchedulesDoyouhavelotsofzoneswhichallneedtoruntothesamewateringschedule?Youcanaddapreconfiguredwateringschedulewhichyouapplytoanycustomersorcontrollers.

My Business

Fromhereyoucanseewhatplanyou’reonandchangeit.

Youcanalsoseehowyourbusinessdetailsappeartoyourcustomerswhentheyare loggedintotheappandupdatethem.

How to Add a Customer ToaddanewcustomerclickonthePlus(+)buttonnexttoMyCustomers:


ThiswillshowtheAddaCustomerscreen–

1. Enteryourcustomer’semailaddressorserialnumberandclickNext2. If your customer already has a Hydrawise account the systemwill detect this and your

customerwillneedtograntyoupermissiontoviewtheiraccount:• ClickRequestAccess–thiswillsendthemanemailaskingthemtograntyouaccessto

managetheircontroller

3. IfyourcustomerdoesnotyethaveaHydrawiseaccountthenenterthecustomerdetailsasshownbelowandanaccountwillbecreatedforthem.

Customer’sEmail Theemailaddressthatthecustomerwillusetologintotheiraccount

CustomerName Thecustomer’sname

TypeofUser If you want your customer to have full control over theirsystem,select“Canmodifyconfigurationandrunzones”


If youdon’twantyourcustomer tobeable tochange theirconfiguration, select “Can view configuration,manually runzones”

SendNotificationsTo Choosewheretosendemailsaboutacontrollerbeingofflineor plans requiring renewal. This can be either your emailaddressoryourcustomer’semailaddress

Sendactivationemailtome If you don’t want the customer to receive an accountactivation email then tick this box and the activation emailwillbesenttoyouremailaddressinstead.

Once you clickCreateyou’ll be taken throughawizard to set up your customer’s controllerand it will be linked to your account. If you chose, you’ll receive the activation email,otherwise,itwillbesenttothecustomer.

OncetheiraccountisactivatedandtheycanloginandviewtheirDashboard,theywillneedtoset a password. Your new customer will now be visible in your list of customers in theContractorportal.

Managing Customers and Controllers InthecontractorportalgototheCustomersandControllerssection.


Clickonanycustomernametodrilldowntoinformationspecifictothatcustomer.

Plans The plans section shows you which subscription plan your customer has and when they’llexpire.Youcanalsoaddplans.

Controllers Thecontrollerssectionshowsyouthiscustomer’scontrollers.Youcanaddacontroller fromhere.Youcanalsoconfigurecontrollers.


Users Theuserssectionshowsyoualltheusersassociatedwithyourcustomer.Youaddauserfromhere.Youcanalsoclickon theusernameor chooseViewDetailsfrom themenuwhichwillallowyoutomanagetheuser.

Files

Youcanaddfilestoacustomer.Forexample,youmaywishtouploadadiagramshowingthelayoutoftheirgarden.Youcanalsorenameanddeleteafile.

AnyfilesthatyouaddtoyourownaccountwillalsoshowupintheMyAccountscreen.


How to Update your Business Details Asalandscapecontractor,youcanmakeyourbusinessdetailsavailabletoexistingHydrawisecustomers.Customerscanthenchooseyoutomanagetheircontrollers.

Ifyou’renotalreadyregisteredasacontractor,youcandosoviayour MyAccountscreen.


NexttoContractorSettings,clickon Change.ThiswillshowtheRegisterforaContractorPlanscreen

If you chooseaplanwith an associatedprice you’ll be taken toPaypal topay for theplan.Thenyoucanenteryourbusinessdetails.

Note:ifyou’realreadyregisteredasacontractor,youcanupdateyourdetailsintwoways:

- viayourMyAccountscreen–simplyclickChangenexttoyourContractorSettings,chooseyourexistingplanandupdateyourdetails.

- viatheContractorPortal


YourBusinessName Thenameofyourbusiness

ContactDetails Yourphonenumberoremailaddress

BusinessLocation Whereyourbusinessislocated

Website Yourbusinesswebsiteaddress

BusinessDescription Abriefdescriptionoftheservicesyouoffer

If youwould like your details to be available to Hydrawise customers, tick the “I wantmydetails listedonlinesocustomerscan findme”box.Nowthatyou’resetupasacontractor,youcaneitheraddacustomertoyouraccountoraskyourcustomers toselectyouas theircontractor–seeHowtoAddaCustomertoYourAccount.YourContractorSettingsshowhowyourdetailswilllooktoHydrawisecustomers.



Tochangethem,clickonChange.Eitherconfirmyourexistingplanorchooseanewone,thenupdateyourdetails.

How to Configure your Customers’ Controllers Inthecontractorportal,findyourcustomerandclickontheirnametoconfiguretheirdetails.Findthecontrolleryou’reinterestedinandusethemenuto:

1. Configureacontroller2. Deleteacontroller3. Moveacontrollertoanothercustomer4. Attachaserialnumbertothecontroller5. Removeaserialnumberfromacontroller6. Generateajobsheetforacontroller

Configure a Controller


Delete a Controller

Ifthecontrollerisnolongerbeingused,youcandeleteit.

Move a Controller

Youcanmoveacontrollerfromyourownaccounttoacustomeraccount.Howeveryoucan’tmovethecontrollerbetweencustomers.

Selecttheaccounttowhichyou’removingthecontrollerandclickMove.


Attach a Serial Number

Thisallowsyoutoassociatetheserialnumberwiththecontroller.

EntertheserialnumberandclickLinktoController.

Remove a Serial Number

Thisallowsyoutoremovetheserialnumberfromthecontroller.


Generate Job Sheet

Ajobsheetisahandysummaryofinformationaboutacontrollerwhichyouoryourstaffcanusewhenyougooutonsitetomakechangesorfixaproblem.

Youcanrunajobsheetfromthreedifferentplaces:

1. Inthecontractorportal, findyourcustomerandclickontheirnametoconfigurethedetails. Find the relevant controller, click on the plus sign and select Generate JobSheet.

2. Inthecontractorportal,clickonthecontrolleronthemapandusethemenutoselectGenerateJobSheet.

3. SelectGenerateJobSheet fromthemenuinthetoprighthandcornertogenerateajobsheetforthecurrentlyselectedcontroller.

You can choose to include or exclude certain parts of the job sheet, as outlined below.Assumingyouincludeallavailableinformation,thejobsheetwillshow:

• JobNumberandjob-specificinstructions• CustomerNameandAddress• ControllerNameandalertssummary• Anareaforyouoryourstafftorecorddetailsonwhenthejobwasdoneandhowlong

ittook• ZoneInformation• Alertdetails• Files(emailonly)

Therearetwowaystogenerateajobsheet:

1. Print

2. Email

PrintaJobSheetIfyouchoosetoprintajobsheet,aPDFfilewillbecreatedwhichyoucanthenprint.

JobNumber Enteranoptionaljobnumber

IncludeZoneDetails Choosetoincludeorexcludeinformationabouteachzone

IncludeZonePictures Choosetoincludeorexcludepicturesforeachzone

IncludeAlerts Choose to include or exclude details about alerts for thecontroller

AddanInstruction Addanoptionalinstructiontothepersoncompletingthejob


EmailaJobSheetIfyouchoosetoemailajobsheet,anemailwillbesentfromyoutoyourselectedrecipientsandyou’llalsoreceiveacopy.Youcanchoosefromalistofusersonthecustomer’saccountand/oryourownstaff.

JobNumber Enteranoptionaljobnumber

Browseemails Choose one or more users associated with the customer’saccountoroneormoreofyourstaffmembers.

Add Addspecificemailaddresses.

IncludeZoneDetails Choosetoincludeorexcludeinformationabouteachzone

IncludeZonePictures Choosetoincludeorexcludepicturesforeachzone

IncludeAlerts Choose to include or exclude details about alerts for thecontroller

AddFiles Choosetoincludefilesassociatedwiththecustomer–thesewillbeattachmentstotheemail

AddanInstruction Addanoptionalinstructiontothepersoncompletingthejob


How to Add a Controller for a Customer Inthecontractorportal,findyourcustomerandclickontheirnametoconfiguretheirdetails.You’llseetheircontrollersandcanclickontheplussigntoaddacontroller,whichwilldisplaytheAddNewControllerscreen.

Enterthenameofthecontrollerandtheserialnumberifyouknowit,thenclickCreate.


Thiswilladdthecontrollertothecustomerandyouwillseeitinthelist.Youcanclickonittosee status informationand fromhere you can configure the controller.Note that yournewcontrollerwillnotappearonthemapuntilyouhavegonethroughtheconfigurationwizardforthecontrollerandenteredanaddressforit.

How to Add a Plan to a Customer Inthecontractorportal,findyourcustomerandclickontheirnametoconfiguretheirdetails.You’llseewhatplansthecustomerhasandwhenthey’regoingtoexpire.

Youcanalso:

1. AddaPlanusingaCodeyou’vereceivedfromaretailer2. AssignaPlanyou’vepreviouslypurchased 3. PurchaseaPlan


Add a Plan using a Code

Ifyou’vepurchasedaplancardwithacodeonthebackfromaretailer,orifthey’vegivenyoutheplancode,youcanusethistoassigntheplantoyourcustomer.Theplancodewilllooklike4charactersfollowedbyadashandanother4characters(forexample45F2-644E).

Clickonthemenuandselect AddPlanusingCode.

You’llbepromptedtoenterthe8digitpincode, thenclickAssignandtheplancodewillbeassignedtoyourcustomer.

EnterthePlanCodeandclick Assign.

Assign an Available Plan Ifyou’vepurchasedplansonline,oryouhavereceivedsomefreeplanswithyourGold,SilverorBronzecontractorplan,andhaven’tyetassignedthemtoacustomer,theseareavailableforyoutoassigntocustomers.

Clickonthemenuandselect AssignAvailablePlan.


You’llseealistofavailableplans–choosetheoneyouwantandclickonAddPlantoassignittothecustomer.

Purchase Customer Plan

Ifyoudon’thaveanyplansavailableyoucanpurchaseonefromhere.

Clickonthemenuandselect PurchaseCustomerPlan.

Choose the plan you want to purchase and select whether or not you’d like it to beautomaticallyrenewed,thencontinuetoPaypaltopayfortheplan.


How to Add a User Youmaywanttohaveseveralpeopleinyourorganisationmanageyourcustomers’controllers.Oryourcustomersmayhavemorethanonepersonintheirhouseholdorbusinesswhowantstomanagetheircontroller.Youcandothisbyaddingextrausersforacustomer.

Inthecontractorportal,findyourcustomerandclickontheirnametoconfiguretheirdetails.

ThiswillshowtheNewUserscreen.


UserName Thenameofthenewuser

EmailAddress Theemailaddressthatthenewuserwillusetologintotheiraccount

TypeofUser If you want your customer to have full control over theirsystem,select“Canmodifyconfigurationandrunzones”

If youdon’twantyourcustomer tobeable tochange theirconfiguration, select “Can view configuration,manually runzones”

ClickCreate–theuserwillgetanactivationemailandwhentheyvisittheirDashboardforthefirsttimetheywillneedtoselectapassword.

How to Manage Users Inthecontractorportal,findyourcustomerandclickontheirnametoconfiguretheirdetails.Findtheuseryou’reinterestedinandeitherclickontheirnameorusethemenutoviewtheirdetails.


Hereyoucanseetheuser’s:

• Name• Emailaddress• Permissions

Youcanalso:

1. Edittheuser2. Deletetheuser3. Resendtheactivationemail4. Sendalostpasswordemail

Edit the User

Thisallowsyoutosettheuser’spermissions.


• If you want the user to have full control over the controller, select “Can modifyconfigurationandrunzones”

• If youdon’twant theuser tobe able to change the configuration, select “Can viewconfiguration,manuallyrunzones”

Delete the User

Thisallowsyoutodeletethisuser.

Resend the Activation Email

Thisallowsyoutore-sendtheaccountactivationemailtothisuser,incase,theycan’tfindit.


Send a Lost Password Email

Thisallowsyoutosendanemailtotheusertoallowthemtoresettheirpassword.

How to Manage Files Inthecontractorportal,findyourcustomerandclickontheirnametoconfiguretheirdetails.Youcanseethelistoffilestowardthebottom.

Youcanalso:

1. Addafile2. Renameafile3. Deleteafile

Add a File

Toaddafile,clickontheplusbuttonintheFilesectionandselectthefileyouwanttoupload.


Rename a File

Torenameafile,clickonthemenunexttothefilenameandchooseRename.

Delete a File

Todeleteafile,clickonthemenunexttothefilenameandchooseDelete.


Creating Customer Wide Settings Customerwidesettingsallowyoutocreatedifferentconfigurationswhichcanapplyacrossmultiplecustomers.

Global Alerts

Therearesomethingsthatyoumayalwayswanttobealertedtoforallyourcustomers.

Forexample,let’ssayyouwanttobealertedtohighwaterflowonanycontrollerforanyofyour customers. You can set up one alert in the Contractor Dashboard and automaticallyapplyittoallyourcustomers,eventheonesyoudon’thaveyet.

FromtheCustomerWideSettingssectionofyourContractorDashboard,selectGlobalAlertsandclickAddNewAlert.


Formoreinformationonthedifferenttypesofalerts,seeAlertTypes.

Onthenextscreen,select“Appliestoallcustomers”toapplythisalerttoallyourcustomersandtheircontrollers.Ifyouaddnewcustomers,orifexistingcustomersaddcontrollersinthefuture,thisalertwillautomaticallybeappliedtothem.

Alternatively,clickonthecustomersandcontrollers inthe“available”boxtoapplythealertonlytothosecustomersorcontrollers.

Onthenextscreen,selecttheactionyouwanttotakewhenthealertoccurs.Youcanchoosetocreateanevent,receiveanin-appnotificationorreceiveanSMS.Formoreinformationon


alertactions,seeAlertActions.Forthesecustomer-widealerts,actionscanonlybesenttoyou,nottoyourcustomers.

Yourcustomerswillalsoseethesealertsontheirownaccountbuttheywon’tbeabletoeditordeletethem–onlyyoucandothat.

Preconfigured Watering Schedules

Youmighthavewateringschedulesthatyouuserepeatedlyacrosscustomersandcontrollers.

For example,whenever you install turf, youmightwant towater it for 30minutes twice aweek. You can set up a preconfigured watering schedule that you then apply to all therelevantzones.

FromtheCustomerWideSettingssectionofyourContractorDashboard,selectPreconfiguredWateringSchedulesandclickAddWateringSchedule.

Thenexttimeyouaddoreditazoneyou’llseethispreconfiguredwateringscheduleandyoucanapplyitstraightaway.

Yourcustomerswillseethesepreconfiguredwateringschedulesandcanapplythemtotheircontrollers,buttheywon’tbeabletoeditordeletethem–onlyyoucandothat.

How to Monitor your Customers’ Controllers Information about the status of your customers’ controllers will show up on your MyCustomersscreen.

1. ClickonSettings–>MyCustomers

In the Customer Events section, you can see different types of events. UsetheInfo,WarningandErrorbuttonstoshoworhidedifferenttypesofevents.


Types of Events

Errors Problems with the controller such as overcurrent or excesswaterusage.

Warnings Possibleproblemswiththecontrollersuchaslowcurrent.

Info Information about the controller such as new zones added orzonerunningtime.

How to Stop Customers Changing their Settings Haveyoueverhadacustomerchangetheirconfigurationandbreaktheirwateringschedule?Youcanpreventthisbystoppingcustomersfromchangingtheirconfigurationdetails–they’llstillbeabletorunzonesmanually.

Therearetwowaystodothis:• Whenyouaddacustomer,choosethe“Canviewconfiguration,manuallyrunzones”

option• Ifyou’vealreadyaddedthecustomer,youcanstillchangetheiroptions

Change an existing customer’s permissions 1. ClickonSettings–>MyCustomers2. Clickonthecustomeryouwanttomanagerorsearchbytheusernameoremail3. Clickontheuseryouwanttochange4. Fromthemenu,selectEdit


Choosethelevelofaccessyouwanttheusertohave:

• If you want the user to have full control over the controllers, select “Can modifyconfigurationandrunzones”

• If youdon’twant theuser tobe able to change the configuration, select “Can viewconfiguration,manuallyrunzones”

ClickSavetochangethepermissions.

How to see Changes to Customer Configuration Whenyourcustomerhasaproblemwiththeircontroller,doyoueverwishyoucouldseewhatchangesthey’vemadetotheirconfiguration?Firstchoosethecontrolleryouwanttomonitor,then:

1. Lookatcustomeralerts2. Lookatreportsforthatcontroller

Reports

From the menu, selectReportsand click on theEventreport. This will show a list of anymessagesrelatedtothatcontrolleroverthepastweek.


GettingHelpSelf-helpguidesareavailableathttps://support.hydrawise.com.

[email protected]

Certifications N29732

Canadian FCC Statement ThisdevicecomplieswithIndustryCanadalicense-exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.

LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsde licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pasproduiredebrouillage, et (2) l'utilisateurde l'appareil doit accepter tout brouillage radioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement.

US FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiateradiofrequencyenergy,andifnotinstalledandusedinaccordancewiththeinstructions,maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffand on, the user is encouraged to try to correct the interference by one ormore of the followingmeasures:

• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandreceiver.• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, aseparationdistanceof20cmormoreshouldbemaintainedbetweentheantennaofthisdeviceandpersons during operation. To ensure compliance, operation at closer than this distance is notrecommended.

Theantenna(s)usedforthistransmittermustnotbeco-locatedoroperatinginconjunctionwithanyotherantennaortransmitter.

Documents

HYDRAWISE READY IRRIGATION CONTROLLERS · Hydrawise App User Guide Page 3 © Hunter Industries 2016 V2.07 Files.....42