I. COMPANY PROFILE - masy-global.com · I. COMPANY PROFILE A. About the organization ... Timsah International Foundation Contracting Saudi, Al Joffe Contracting Dubai, and AIC Contracting

I. COMPANY PROFILE A. About the organization A.1 Organizational Chart A.2 Contact Information B. Core Competence C. Vision, Mission & Philosophy D. Quality Policy E. Environmental, Health and Safety Policy E.1 EHS Policy Statement E.2 Insurance Policy E.3 Equipment Safety E.4 Operator’s Quality Certificate F. Business Entity Documentations F.1 Commercial License/Register F.2 Chamber of Commerce Certificate II. BUSINESS ACTIVITIES A. Details of Business Activities B. Brief Description III. RESOURCES A. Financial B. Human Resources C. Machinery & Equipment C.1 Equipment list C.2 Equipment Photos IV. EXECUTED PROJECTS A. Application/Market Sectors B. Installation Photos V. PRINCIPAL & SUB CONTRACTORS

A. ABOUT THE ORGANIZATION IGS FOUNDATION CONTRACTING – is one of Mr. Amr M. Amin Group of Companies, Mr. Amin has shares of the following companies and he play major role in managing these companies, which they are IGS Foundation Contracting Dubai, TMF Euro Foundations Dubai, TMF Euro Foundations Oman, Timsah International Foundation Contracting Saudi, Al Joffe Contracting Dubai, and AIC Contracting Egypta ground engineering solution company with remarkable expertise in the complex fields of piling and foundations. Established in Dubai in 2003 as TMF Euro Foundations, but due changing in the market of UAE Due to the World Wide Economical Crises IGS Foundations Contracting has emerged from TMF Euro Foundations in 2013 so it can eliminate the excessive overhead cost and can compete in the construction market. Since then, the organization has committed to innovation and executes projects of all sizes. As a company, it embraces new trends in working with clients. Its objective is not only to complete projects successfully to the highest standards, but most significantly to add value to its client’s businesses. IGS FOUNDATION CONTRACTING experience facilitates a Design /Build approach to projects and allow timely collaboration with contractors, consultants and end-users. IGS employs qualified professionals who manage the site with ease, confidence and professionalism. The company’s resources are insured against Contractor’s All Risks, Employer’s Liability, Third Party Liability and Machinery All Risks. IGS’s expertise lies in solving its clients’ ground engineering problems such as retaining soil structures, building marine jetties, piling and foundations for high-rise buildings, improving ground conditions and recently, the company had formed its Surveying Department in support of the construction division. The company’s success and continuous growth depends to a great extent to its use of professional, qualified and experienced personnel. IGS places immense emphasis on personal service and partnering solutions coupled with the knowledge and capabilities to solve foundation and site problems with accuracy and reliability. The company thrives on projects that are difficult. These projects help to generate creativity and team building that has led to IGS’s success. Its clients are assured that for every job IGS carries, it works the hardest to ensure a successful completion and hand-over. Its approach to each project is one of efficiency, economy and ingenuity. IGS faces each day with a different level of challenge and firmness in its commitment to the industry.

A.1 ORGANIZATIONAL CHART

BOARD OF DIRECTORS

Engr. AMR M. AMIN Chairman

Engr. Ashok Kumar Construction Manager

Walid Ahmed Gouda Chief Accountant

Secretary

Senior Accountant

Maryam Amin Administration

Junior Accountant Purchaser Liaison Officer

Engr. Majdi Saif Project Director

Technical Manager

Engr. Esam Hamza Mechanical Engineer

QS/QC/EHS

Technical Engineer

Mechanical Supervisor

Electrical Supervisor

Safety Officer

Mohamed Abdul Azeim

Surveyor

Project Engineer

Project Engineer

Project Engineer

Project Engineer

A.1.1 PROJECT ORGANIZATIONAL CHART

MAIN OFFICE

PROJECT DIRECTOR Eng Majdi Saif

Mechanical Engineer Engr Essam Hamza

Technical Officer Engr Mohamed

Sahmoud

Administration office &

Store Stock Mariam Amr Amin

Project Engineer Engr. Ahmed Abdo

Site foreman Mr. Salah

SoilMec SR70 Operator Nazakat

SoilMec R622 Operator

C800 Operator Mohd Mahmoud

Supporting Labor

Safety Officer

COMPANY PROFILE A.2 CONTACT INFORMATION

UNITED ARAB EMIRATES GCC COUNTRIES

IGS FOUNDATION CONTRACTING

(L.L.C.)

P. O. Box 77717 Dubai, U.A.E.

Tel. No. : +971 4 2956623

Fax No.: +971 4 2956624

E-mail : [email protected]

Website:

T.M.F. EURO FOUNDATIONS (L.L.C.)

DXB.BR

P. O. Box 83834 Dubai, U.A.E.

Tel. No. : +971 4 2980942

Fax No.: +971 4 2980953


Website:

T.M.F. EURO FOUNDATIONS (L.L.C.)

SHJ. BR

P. O. Box 95177 Sharjah, U.A.E.

Tel. No. : +971 6 535 3390

Fax No.: +971 6 535 3391


Website:

TMF EURO FOUNDATIONS LLC

P. O. Box 2121 Ruwi

P.C. 112 Muscat, Sultanate of

Oman

Tel.: +968 2 458 2556

Fax: +968 2 458 2560

Mob. : +968 9 732 0454

E-mail: [email protected]

T.M.F. EURO FOUNDATIONS - L.L.C. -

ABU DHABI BRANCH

Abu Dhabi, U.A.E.

Mob No.. : +971 50 624 9905


Website:

AL TIMSAH INTERNATIONAL

FOUNDATIONS AND CONTRACTING

CO. (L.L.C.)

Kingdom of Saudi Arabia

Fax No.: +966 2 651 4564

Mob. : +966 56 987 8329

E-mail: [email protected]

mailto:[email protected]





IGS FOUNDATION CONTRACTING (L.L.C.)

“committed to service and customer ‘s satisfaction”

At IGS, we pride ourselves on our versatility, strength in engineering and construction concepts, hard work, honesty, teamwork, excellent customer relationship, collaboration, open communication and the ability to deliver on a timely schedule.

WHY IGS? WHAT SETS IT DIFFERENT THAN THE REST OF THE PILING COMPANIES….

1. The company gives emphasis on the four (4) main pillars of success : “TECHNOLOGY, PRODUCTIVITY, RELATIONSHIP AND SERVICES.”

2. IGS focuses in making site personnel as productive as possible to get each task handled with the lowest cost but with the most efficient personnel available.

3. Focusing on the technology side of the business, management ensures that it applies the latest standards in piling and foundation design and construction concepts.

4. Maintains experienced engineers, well trained operators and strong design background that propels IGS to succeed in this region.

5. IGS builds its business around productivity - pre-plans every job, compares actual performance against pre-determined standards, coordinates with consultant and main contractor and monitors site performance against overall project schedule.

IGS FOUNDATION Contracting (L.L.C.) is committed to excellent service and exceptional customer’s satisfaction

COMPANY PROFILE C. VISION, MISSION, PHILOSOPHY & VALUES

“OUR COMMITMENT TO SERVICE AND CUSTOMER’S SATISFACTION”

VISION:

IGS Foundation Contacting envisions:

• To be a leading piling and foundation solutions provider at international standard.

• Strong commitment to investing its resources in order to maintain its position as market leader.

• Build on its long term relationship and establish two way commitments.

MISSION AND PHILOSOPHY:

• To become one of the largest, dynamic, dependable, most innovative and safest specialty foundation contractors, providing its clients with high quality services consistent with or ahead of specific requirements and schedules.

• To understand customer’s requirements and work with them to exceed their expectations.

• To address quality, on-time services and cost effective piling and foundation techniques.

• To ensure that its employees are properly trained and developed to meet the company’s objectives.

• To generate sufficient profit to guarantee future security and stability.

• To forge mutually beneficial supplier relationships.

BUSINESS PRINCIPLES AND VALUES

• Being proactive and continuously share its knowledge, experience and innovations with the clients in order to add value to the services at all times.

• Being consistent in all its business dealings in order to achieve the highest level of professional and ethical standards.

• To give high accord to customers’ relationship in order to maintain their continuous patronage.

COMPANY PROFILE D. QUALITY POLICY

IGS FOUNDATION CONTRACTING (L.L.C.) a leading piling and foundation company is fully committed to the quality policy that ensures the highest level of customer satisfaction at all times, ensuring its position in the market.

One of the primary objectives of IGS is to achieve the highest standards of quality in its operations and all business practices without boundaries and compromises. The company’s goal is to continually improve its performance, while offering its costumers quality ground engineering services at cost effective and competitive market rates.

Quality and on-time performance is one of the cornerstones of the company and is considered a personal responsibility of all the employees. In order to maintain quality performance at the highest level at all times, IGS is guided by the following principles:

1.To strictly abide with international standards in ensuring the highest performance requirements by providing excellent design/build approach.

2.To fulfill and exceed customer needs and expectations by delivery quality services in a consistent and timely manner while ensuring that their requirements are fully identified and met.

3.To cultivate and maintain the commitment to continual improvement, identifying potential errors and weaknesses and take the necessary action to eliminate them.

4.Communicate its business goals and objectives to each and every employee enabling them to assist in effectively achieving the same.

5.Promote a working environment where continuous training and development is provided to every employee to ensure that they understand the company’s policies and procedures, which are periodically reviewed to be able to perform their duties effectively.

6. To constantly review and improve its business practices to attain its goals and objectives.

IGS FOUNDATION CONTRACTING (L.L.C.) is committed to operate continuously in line with the above quality standards and will take every effort to obtain the necessary Quality approval consistent with our customer requirements.

COMPANY PROFILE E ENVIRONMENTAL, HEALTH & SAFETY POLICY E.1 EHS POLICY STATEMENT

The vision of Quality and EHS excellence of IGS Foundation Contracting (L.L.C.) is shaped by the core values of dedication, integrity, honesty, accountability, trust, mutual respect, transparency and teamwork. IGS strongly believes that accidents do not happen, they are caused and therefore, it is each person’s responsibility to ensure that safety is an integral part of every activity. In IGS’s mission of protecting the people, properties and the environment, they do believe that EHS is an essential part of the management and decision-making process. Hence, IGS is guided by the principles of: 1. Valuing human life. 2. Developing effective policies and procedures that provide safety for the workplace, and the

environment while providing flexibility to meet the needs of the business. 3. IGS is committed to provide a safe, injury-free workplace by integrating safety in its daily business

decisions and processes. Every employee is responsible for his/her safety and of those around them. It motivates employees to achieve zero work related incidents, injuries through proper training and supportive work management., and we work together to identify and eliminate health and safety risks at the workplace.

4. The company encourages all of its employees to adopt a healthy, safe and environmentally conscious lifestyle both at home and at the work front.

5. IGS fully supports its strong commitment and dedication for innovative designs that are safe, efficient and minimized impact to the environment.

Overall, IGS is committed to continually improve its EHS standards through learning, sharing and participation in continuous improvement programs and or technologies that advance it EHS goals. The company fosters open and transparent communication in reporting its performance, goals and objectives in order to generate sustainable EHS improvement and value. IGS will continue to maintain appropriate controls, including periodic review to ensure that this policy is

being followed strictly. Moreover, to encourage, recognize and reward positive contribution to the advancement and effective implementation of its EHS goals and standards.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.1 Commercial License Dubai, U. A. E.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.1 Commercial License Dubai, U. A. E.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.1 Commercial License Sharjah, U. A. E.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.1 Commercial License Sultanate of Oman.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.1 Commercial License Kingdom of Saudi Arabia.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.1 Commercial License Sultanate of Oman.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.2 Chamber of Commerce Certificate Dubai, U.A.E.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.2 Trade Name Abu Dhabi, U.A.E.

COMPANY PROFILE F. BUSINESS ENTITY DOCUMENTATIONS F.2 Chamber of Commerce Certificate Kingdom of Saudi Arabia.

BUSINESS ACTIVITIES A. DETAILS OF BUSINESS ACTIVITIES

A. EXCAVATION RETENTING SYSTEM

TMF has the resources and the capabilities to design and install excavation retention systems

to facilitate excavation up to desired depth using:

1. Diaphragm Wall

2. Contiguous Pile

3. Secant Pile

4. Sheet Pile

5. Soldier Pile

B. CAST-IN-SITU-PILE

1. Bored Pile (varies from 2500mm to 500mm dia for a depth up to 56m)

2. Continuous Flight Auger Pile (pile dia varies from 1200mm to 500mm for a depth up to 36m)

3. Micro pile (pile diameter varies from 100mm to 350mm for length up to 35m)

C. SOIL IMPROVEMENT

1. Impact Pier System

2. Stone Column Vibro Replacement

3. Soil Compaction

4. Soil Injection

D. GROUTING 1. Soil Cement Stabilization

2. Rock Cement Grout

3. Cavity Injection

4. Chemical Injection

5. Compaction

E. DEWATERING

1. Deep Well/Well Points

F ANCHORAGE

1. Ground Anchor

2. Soil Nailing

BUSINESS ACTIVITIES B. BRIEF DESCRIPTION

A. EXCAVATION RETENTION SYSTEM

1. Diaphragm Wall

Commonly used in congested area for retention systems and permanent foundation works. They can be installed in close proximity to existing structures with minimal loss of support to existing foundations.

Diaphragm wall (also known as slurry wall) are basically deep trenches excavated in the soil into which reinforced concrete is placed. Excavation is accomplished by digging panels into the ground, while trench stability is maintained using bentonite or polymer slurries. Once excavated, three-dimensional reinforcement is set in the trench and followed by the placement of structure grade concrete using tremi pipes. The result is a structural wall system that not only provides temporary earth support, but also provides permanent foundation system.

2. Contiguous Pile

Closely spaced bored piles can be used to form a retaining wall, perhaps for the construction of a deep basement or a cut and cover tunnel. The piles may be constructed so that they virtually touch each other (contiguous)

3. Secant Pile

Every other pile may be constructed, with their centers less than two diameters apart. In fill piles are then bored, cutting into the adjacent piles to form a continuous structure. To aid construction, the first set of piles may be cast with a lower grade of concrete. These may not be load-bearing and act as “SEALS” between the main load bearing piles.

4. Sheet Pile

Sheet piles wall are constructed by driving steel sheets into a slope or excavation. Their most common use is within temporary deep excavations. They are considered to be most economical where retention of higher earth pressure of soft soil is required.

An important advantage is that they can be driven in depths below the excavation bottom and so provide a control to heaving in soft clays or piping in saturated sand. Sheet piles are more costly and less adaptable to hard driving conditions particularly where boulders or irregular rock surfaces occur.


5. Soldier Pile

Constructed using wide flange of steel H sections spaced about 2 to 3m apart and are driven prior to excavation. It consists of multiple piles spaced apart form each other to support a change of elevation. The piles are usually H beams installed in drilled shaft. Timber lagging is then installed between the H beams to restrain the soil between the piles. Deeper excavations may require tiebacks to be installed at the piles for additional support.

Soldier pile shoring is very versatile because the size of the piles and the spacing between them can be adjusted to site soil condition. In many cases, this is the most economical method of shoring.

B. CAST-IN-SITU LOADED PILE 1. Bored Pile

Another type of reinforcement concrete pile which is used to support high building which has heavy vertical load. Bored pile is a cast-in-place concrete pile where the bored piles have to be casted in the construction site while other concrete piles are pre-cast concrete pile casted in the factory. Machine used for this pile method is a bored piling machine which has specially designed drilling tools, bucket and grabs, which can drill into 50meters depth of soil.

Bored piling is best for tall buildings or massive industrial complexes, which requires foundations which can bear the load of thousands of tons. Bored pile drilling method has little vibration and lower noise level.

2. Continuous Flight Auger Pile (CFA)

CFA Piles are formed by drilling a continuous flight auger into the ground. The sides of the hole are supported at all times by the soil filled auger, eliminating the need for temporary casing or bentonite slurry. Upon reaching the required depth, sand element grout or concrete is pumped down the hollow stem as the auger is steadily withdrawn. Reinforcement is placed immediately after withdrawal of the auger.

There are numerous benefits to this approach, including immediate replacement, zero subsidence, lack of free water within the shaft, computer monitoring of depth and concrete placement and no need for casing/slurry.


3. Micro pile

Micro piles are also called mini piles. Micro piles are normally made of steel with diameters of 60 to 200mm. A typical micro pile construction involves drilling the pile shaft to the required depth, placing the steel reinforcement, initial grouting by tremie and placing additional grout under pressure where applicable.

The advantages of micro pile are high carrying capacity, less site constraint problems and self sustained operation. This piling system is therefore attractive to both the client and the foundation designer. Apart from the light compact drilling rigs, other auxiliary equipment, like grout mixer and grout pump is very compact in size. Where the demands of the job require piles in low headroom or otherwise restricted areas and for specialty or smaller scale projects, micro piles can be ideal.

C. SOIL IMPROVEMENT

1. Impact Pier System (The Impact Construction Process – Vibrol Displacement

The impact system uses vertical displacement Rammed Aggregate Pires (RAPS) to reinforce good

to poor soil, including loose sand, silts, mixed soil layers, uncontrolled fill and soil below the ground water table.

The unique installation process displaces soil during installation and utilizes vertical impact ramming energy to construct vertical displacement RAPS, which exhibit unsurpassed strength and stiffness. The installation procedure produces lateral compaction and pre-stressing and pre-straining of the surrounding matrix soil. RAP solutions are designed to provide total and

differential settlement control and increase bearing support to meet project requirements.


2. Stone column replacement

A ground improvement technique to improve the load bearing capacity of the soil. The stone

columns consist of crushed coarse aggregates of various sizes. The ratio in which the stones of different sizes will be mixed is decided by design criteria. Aggregates are placed in the soil by using either dry or wet top feed or bottom feed vibrators which are forced into the ground. The aggregates are then allowed to take the place of the displaced soil which exert pressure on the surrounding soil hence helping to improve the soil load bearing capacity, reduces foundations

settlement, mitigates liquefaction potential and improve shear resistance.

3. Soil compaction

A method of mechanically increasing the density of soil. The action of the vibrator, usually

accompanied by water jetting, reduces the inter – granular forces between the soil particles, allowing them to move into a denser configuration. If performed improperly, settlement of the soil could occur and result in unnecessary maintenance costs or structure failure.

The advantage of soil compaction are – increases load bearing capacity, prevents soil settlement, provides stability, reduce water seepage, swelling and contraction.

RESOURCES A. Financial

With IGS Foundation Contracting bringing together a diverse background of Ground Engineering expertise, its solid commitment to excellent service and customer’s satisfaction, management had instituted rapid growth in the business that ensured financial progression and stability of the organization.

Practicing a financial philosophy that reinvents profits back into the company, IGS Foundation Contracting enjoys substantial benefits with significant bonding capacity available for projects requiring such performance.

The company’s steadfast financial security adds value to the company’s capability to allocate funds efficiently, and to finance projects, no matter of the size and complexity. Maintaining sound financial management is one of the key strength of IGS that sets its capabilities to sustain and complete projects on a timely manner.

IGS Foundation Contracting’ financial position and results of operations are annually examined by independent and experienced auditors, as part of its internal control program.

RESOURCES B. Human Resources

IGS Foundation Contracting fosters the philosophy of continuous staff training and development. It recognizes human resources as significant asset of the company. Thereby, it acknowledges the value and contribution of each individual in many ways. IGS bases its employment on merit, qualifications and abilities. As equal employment opportunity employer who does not discriminate against any individual based on race, color, religion, sex, nationality, age, disabilities etc. All potential employees are screened on the basis of the company’s standard recruitment policy.

Recognizing the value of human resources IGS Foundation Contracting plays emphasis on competence, ability, skills and knowledge. The company encourages rewards and incentives for exceptionally good work among others, as human excellence plays a significant role in achieving the company’s objective. Human resources constitute the most valuable element in IGS’s asset portfolio. As such, the organization has already defined its strategic purpose optimizing the allocation and use of its human assets, promoting an effective hiring strategy, performing constant review of human resources capacity in relation to strategic purpose and most of all following a fair and reasonable wage-benefit administration policy.

RESOURCES C. EQUIPMENT & MACHINERY C.1 EQUIPMENT & MACHINERY DETAILS

With it’s primary commitment to excellent service and customer satisfaction, IGS Foundation Contacting along with TMF EURO FOUNDATIONS has invested a great deal of fund for the acquisition of equipment and machinery in order to carry out it’s business objective.

TYPE QUANTITY I. SOILMEC 1. SOILMEC SR70 2009 1 2. SOILMEC SR60 2008 1 3. SOILMEC R622 1996 1 4. SOILMEC R618 1996 2 5. SOILMEC R516 2000 1 6. SOILMEC R416 2000 1 7. SOILMEC R15 1990 1 8. SOILMEC R12 1989 1 II. CASSAGRANDE 1. CASSAGRANDE C800 2004 1 1.a SPECIAL SHORT MAST 8m HEIGHT 1.b NCB DIAPHRAGM WALL 2m WIDTH 60m DEPTH 2. Casagrande HD 180 2005 1 3. Casagrande HD 180 2003 1 III. IMT 1. IMT AF180D 2008 2 2. IMT AF120 2005 1 IV. ABI 1. ABI SHEET PILE DRIVING MACHINE 1996 2 V. MICROPILE 1. CASSAGRANDE C6 2007 1 2. CMV 900 1

RESOURCES C. EQUIPMENT & MACHINERY C.1 EQUIPMENT & MACHINERY DETAILS

TYPE QUANTITY VI. VIBRATORS

1. PTC 25 HYDRAULIC VIOBRATOR 1

2. PTC 60 ELECTRICAL VIOBRATOR 1

3. ICE 100 HYDRAULIC VIBRATOR 1

4. ICE 815 2

VII. DRIVING HAMMER

1. DELMAG D36/D45 1

2. DELMAG D22 1

3. DELMAG D12 4

VIII. CRANES

1. HITACHI CRANE KH180 3

2. HITACHI CRANE KH 230 1

3. PRIESTMAN 3

3. LINK BELT 60T 1

4. LINK BELT 50T 2

IX. CONCRETE PUMP

1. PUTZMEISTER 3

Photos of Project in Salalah, Sultanate of Oman

RESOURCES C. EQUIPMENT & MACHINERY C.2 EQUIPMENT & MACHINERY PHOTOS

I. SOILMEC

SOILMEC (SR 70) SOILMEC (SR 60)


SOILMEC (R622) SOILMEC (R618)

I. SOILMEC


I. SOILMEC




I. SOILMEC


II. CASSAGRANDE C800

DIAPHRAGM WALL SHORT MAST


III. IMT

AF120 AF180D


IV. ABI

ABI SHEET PILE DRIVING MACHINE


V. MICROPILE

CASSAGRANDE C6 CMV 900


VI. VIBRATORS

PTC 126 TONS HYDRAULIC VIBRATOR


ICE 100 45 TONS HYDRAULIC VIBRATOR

VI. VIBRATORS


VIII. CRANES

HITACHI CRANE PRIESTMAN


IX. CONCRETE PUMP

PUTZMEISER

EXECUTED PROJECTS By TMF Euro Foundations A. APPLICATION / MARKET SECTORS – U.A.E.

I Executive Retenting System

1. Contiguous pile

LN Client Project Details

A Ahmad Abdulrahim Ahmad Al Attar Residential / Commercial Building for

4B+G+3P+20F, 3B+G+3P+14F&

3B+G+3P+14F, International City DUBAI

B Ramesh Khanchandani B+G+1 Villa Plot No. 394-809 (E-89),

394-811 (E-75A) at Emirates Hills 3rd

C Yousuf & Aman Contracting Co. 2B+G+11+Gym Office Building Plot No.

373-1244 Al Barsha, Dubai

D Al Gaith Building Construction (LLC) B+G+M+4 Typical Commercial/

Residential Building Plot 123-1131 at Al

Muteena, Dubai

E Nashwan General Contracting LLC B+G+2 Mosque Plot No. 112-352 at Al

Ras

F Shabib Ahmed B+G+2 Building Plot No. 127-752 Hor Al

Anz

G Mr. Bader Mohd. Bukhamas Parkview Hotel 2B+G+10, Plot No. 316-

848 at Al Raffa, Dubai

EXECUTED PROJECTS A. APPLICATION / MARKET SECTORS – U.A.E

I Executive Retention System

2. Secant pile


A Select Group West Avenue Tower 2B+G+31 on Plot No. 392-467, Dubai Marina,

U.A.E, Including center piles

B Gulf Towers Investments Enabling Works for 3 Nos 4B+G+12 Retail & Office Buildings

C Fakhruddin Properties Ltd. Maimoon Towers 3B+G+4P+45 Floors (Tower I) & 30 Floors (Tower II)

Residential/Commercial Tower Jumerah Village Dubai

D Wade Adams Contracting

(L.L.C.)

R882/2 - Improvement of Al Safooh Area Road Network Roads R3 & R5

E Gulf General Investment Co. International Financial Tower 4B+G+5P+HC+48+Mech'l Level &

International Financial Hotel 4B+G+5P+HC+15 Sharjah

F Chelsea Group 3B+G+M+7+R Building Plot No. 317-226 Mankool, Dubai

G Yousuf & Aman Contracting Co. 2B+G+11+Gym Office Building Plot No. 373-1244 Al Barsha, Dubai

H Horizon Contracting Co. (2B+G+B) at Al Basha for Mr. Habib Mohadmmed Shareef

I DUTCO Construction Underpass Shoring Work at Ras Al Khoor

J Al Hazza Construction (B+G+23) in Nahda, sharjah

EXECUTED PROJECTS A. APPLICATION / MARKET SECTORS - U.A.E


2. Secant Pile

3. Sheet pile


A Arabtec Sunland Joint Venture Palazzo Versace & D1 Tower

B Arabtec Sunland Joint Venture Palazzo Versace & D1 Tower – Boring of wells

C Mabani Delma ADSSC Contract No:O-1903, Construction of Sewerage Connections and Related Works In Abu Dhabi Island and Main Land - Phase IV


K Al Hudda Construction (B+G+12) In Barsha-Dubai

L Technician Contractors (G+12) Bldg. in Ajman

M Sefi Fontec.LLC Shore Line Apartment at Jumerah Palm, Dubai

N Al Shafar National (2B+G+3+GYM) for Mr. Abdulrezaq Al Zarooni at Karama, Dubai



4. Soldier Beam


A Horizon Contracting Co. Al Tayer Villa, Dubai

B System Construct LLC Construction of Filling Station for ADNOC at

H.H. Sheikh Tahnoon Palace, Abu Dhabi

C System Construct LLC Demolition & Re-construction of two filling Stations (Al HOSN & AL

MANHAL)

D Fast Building Contracting Repton School Nad Al Sheba, Dubai

E Al Naboodah Contracting LLC R881/3B- Comprehensive Improvement of the Parallel Road

(Contract 3B) Pump Station DUBAI

F Gustav Pegel Air Arabia Studio Apartment 1 & 2- Sharjah AirPort

G Bohra Islamic Jamaat Society Residential / Commercial Building for B+G+6 Floors on plot no. 421-

765 at Al warqa 1st, Dubai

H Mr. Abdullah Mohamed Yousuf

Bukhammas

B+G+1 Villa Plot No. 281-261 at Al Khawaneej 1st, Dubai

I Bohra Islamic Jamaat Society B+G+11 & 12 Floors Residential Building Plot No. 241-596 at Al

Nadha Second, Dubai



4. Soldier Beam


K Al Naboodah Contracting LLC R881/3B- Comprehensive Improvement of the Parallel Road, underpass

WR01L2

L Oriental Dubai Contracting Supply & installation of steel beams to retain max excavation depth of

2.5m for G+1 Villa

M Ideal Systems Contracting

L.L.C.

G+M+2+HC Building Plot No. 118-621 at Naif, Dubai

N M.A.G. Contracting (L.L.C.) B+G+7 Floors Residential Building Plot No. IC3-L29 at International City,

Phase 3, Dubai

O System Construct LLC Shoring Work Warehouse & G+1 Labor Accommodation Building

P Amana Steel Buildings

Contracting Co, L.L.C

B+G+M+1 Office Bldg for Dubai Bank Jumerah Branch

Q System Construct LLC B+G+1+Gym Commercial / Residential Building at Jabel Ali

R Damac Properties Company Ltd JVC10BMRA500,JVC10BMRA700 & JVC10CMRA700 at Jumerah

Village Tuscan Residence

S Damac Properties Company

Ltd.

JVC14BMRA500,JVC14CMBRA & JVC14BMRA100 AT Jumeirah Village

Emirates Gardens 2

T System Construct LLC Shopping mall Plot 599-973 at Jebel Ali Ind. Area



4. Soldier Beam


U Comfort Inn Hotel 2B+G+14 at Comfort Inn Hotel, Installation of soldier beam

V Horizon Contracting

Comapany

(B+G+M+4+Roof) Building on plot no. 123-152 at Al muteena,

Dubai

W Al Rabat Buiding

Contracting Co. LLC

Commercial + Residential Building (2B+G+6+GYM) for Mr.

Mohammed Obaid Bushaqar

X Torque Piling Technology

B+G+1 Supermarket for M/s. Union Cooperative Society

Y Al Hamed Development &

Construction

Up Town City at Mirdif, Dubai

Z PRESCOTT Development B+G+1 Commercial/Office on plot 363-1020 Al Manara Dubai

AA New World Investment LTD 1B+G+14 TYP +Pool+ Roof at Sport City


II Cast-in-Sites Pile

1. Bored pile

LN Client No. of

piles

Pile

Diameter

Project Details

A Al Sahel

Contracting

Company

L.L.C

Iranian Hospital Dubai (B+GF+3

Hospital Building - Phase 1

B Emirates

Islamic Bank

Piling Works for Dream Tower

(4B+GF+40+2MECH+Roof)

C Department of

President’s

Affairs (DOPA)

Development of Internal Roads in

Abu Alabiad Island

D Al Ahmadiah

Aktor

Jebel Ali Sewage Plant

E System

Construct LLC

G+6 Lease Office Building Plot No.

P 565-01 Hamriya Port. Duba

F Taisei

Corporation

R800/5 Ras Al Khor, Double

Decking Project

G Model

Engineering

Cont. Co. LLC

G+M+6 TYP Floor Ajman

H Quality House

Contracting

LLC

27+21 600 mm

&

750 mm

(G+8) Bldg. on Plot No.11/5 at

Ajman for Mr. Abdul Kareem Yousuf

Al Gharabli



1. Bored pile

LN Client No. of

piles

Pile

Diameter

Project Details

I Building

Contracting

Co.

(G+4P+15F) on Plot no. 225, Al

Ajman for Dr. Rashid Bin Nasser

J Beijing

Emirates

Contracting

Co. LLC

49

1000 mm &

900 mm

Beijing Emirates Contracting Co.

LLC

K Al Moosa

Contracting

(Pioneer) LLC

73

1000 mm &

800 mm

G+2P+12+Type+HC Tower on Plot

no.141 Al Nada, Sharjah, UAE

L Al Thabat

Building

Contracting

LLC

58 1000mm &

900mm

G+10 for Mr. Hassan Obaid Qayed

at Plot No.604 Al Majarrah, Sharjah

M Team

Engineering.

52 1000mm &

900mm

Bldg (G+M+11 Typical Stories) in Al

Majarrah, Sharjah on Plot no.77

N UHUD Bldg.

Contracting

Co.

(G+4P+15F) at Plot No. 225 at

Al Naimia, Ajman for Dr. Rahid Bin

Nasser

O Model

Engineering

Cont. Co.

133 600mm Lulu Bldg (G+M+6TYP) for Mr.

Saeed Khalifa Sami



1. Bored pile

LN Client No. of

piles

Pile

Diameter

Project Details

P UHUD Bldg.

Contracting

Co.

102

1000mm

&

1200 mm

(G+4P+15F) at Plot No.225, Al

Naimia, Ajman for Dr. Rahid Bin

Nasser

Q Sumer

Contracting

Co.

112

1000 mm (B+G+21) Hotel at Al Qasimia

Sharjah

R Khairallah

Contractors

73 900mm

&

1000 mm

(G+P+15+HC) at Sharjah

S Al Hamed

Development

Cont.

116

600 mm Sajwani Villa at Palm Jumeriah,

Dubai

T National

Contracting

54 1100 mm (G+M+1P+15F) + Penthouse+roof

at Al Nahda, Sharjah


II Cast-in-Sites Pile 2. Continuous Flight Auger

LN Client No. of

piles

Pile

Diameter

Project Details

A Al Hatem

Contracting

JVT04AHRA300 Jumeirah Village

South

B Imperial

Building

Contracting

Co.

G+6 Residential Bldg Plot 482 Sec.

16 Al Jurf

C Fast Building

Contracting

L.L.C.

233

1,200, 100, 800

& 600mm

B+G+M+6P+ 30 Floors Res. Tower

on Plot Nos. 158-159 at Al Nahda,

Sharjah for ETA Star Properties

Developers L.L.C.

D Eastern

International

283

750 mm G+3P+10Floors +R on Plot No. 573

at Abu Shagara, Sharjah for Utmost

Properties

E Al Rawabi

Contracting

18+23

500 mm

&

600 mm

(G+4F) for Arab Investment &

Development at Ajman, Al Bustan

F Properties,

Sons of Ali

Mukhter Al

Yousuf

360

Shoring

600mmø

(2B+G+6+GYM) for Sons of Ali

Mukhtar Al Yousuf at Al Barsha

First.

G National

Contracting

LLC .

50+19

600 mm &

700 mm

(G+8) Storey Building for Mr.

Mohammed Abdullah Ismail Al Ali

H Halab Bldg.

Contracting.

14+54+9 500mm, 600mm

& 750mm

(GR+6F) Al Majarah, Sharjah on

Plot No.889 for Mr. Khalfan Saeed

Al Kindy



2. Continuous Flight Auger

LN Client No. of

piles

Pile

Diameter

Project Details

I Yousuf &

Aman Cont.

LLC.

210

600 mm

(2B+G+10F)+Roof Apartment

Building on Plot No.373-1237 at

Al Barsha First Dubai for Mr.

Mohammed Khalifa Al Yousuf Al

Suwadii

J UHUD Bldg.

Contracting

Co.

9 + 48

80 mm

&

60 mm

G+9F on Plot No.323 at Al

Nadha, Sharjah, for Mr. Majid

Saeed Abdullah

K National

Contracting

LLC .

50+19

600 mm &

700mm

G+8 Storey Buildng for

Mr. Mohammed Abdullah Ismail

Al Ali

L Halab Bldg.

Contracting

14+54+9

500mm, 600mm

& 750mm

(GR+6F) Al Majarah, Sharjah on

Plot No.889 for Mr. Khalfan

Saeed Al Kindy

M Quality House

Contracting

LLC

27+21

600 mm

&

750 mm

(G+8) Bldg. on Plot No.11/5 at

Ajman for Mr. Abdul Kareem

Yousuf Al Gharabli.

N National

Contractors

69

900 mm

( G + 3P + 15 F ) in Al Majaz,

Sharjah

O Model

Engineering

Contracting

Co.

110

750 mm G+12 Residential Bldg on Plot

No. 241-179 at Al Nahda, Dubai



3. Micro Pile

LN Client No. of

piles

Pile

Diameter

Project Details

A CONMIX Tie Back Anchor Works for

2B+G+10 Floor Commercial /

Residential Building

B Arabian

Forasol

97 Anchors Capital Tower – Package 2100 –

Anchor Works

EXECUTED PROJECTS A. APPLICATION / MARKET SECTORS - SULTANATE OF OMAN

Cast-in-Situ Pile

Continuous Flight Auger - CFA

LN Client No. of

piles

Pile

Diameter

Contract

Value

Project Details

A International

Piling Experts

L.L.C.

200 800 185,000.00 Piling - Secant Pile Wall for

Sewage Shaft

B International

Piling Experts

L.L.C.

75 750 OMR 65,000.00 Boring & pouring of 500mm pile,

12m length

C The office of

the Advisor of

His Majesty for

culture Affair

385 800 1,750,000.00 Water Front Development AL

Baleed Salalah.

D Jendal

Shadied

1600 1200, 1000,

900, 600

856,000.00 New SMS plant at Sohar

E Techni Build 80 750 45,000.00 Cement Factory at Buriemi

F Ministry of

Economics

791 500,600,

900mm

18500 Ministry Of Economics annex

building

G Royal Oman

Police

960 500mm 130,000 Construction of Port Sohar Police

Station

EXECUTED PROJECTS B. INSTALLATION PHOTOS

Shore line Apartment

Palm Jumeirah Dubai


Shore line Apartment

Palm Jumeirah Dubai


2B+G+8 at Al Barsha, Dubai

Contractor: M/s. Yousuf & Aman Construction


2B+G+8 Typical Floors at Al Muteena, Dubai

Contractor: M/s. Horizon Contractor


2B+G+8 Typical Floors at Al Muteena, Dubai

Contractor: M/s. Horizon Contractor





B+G+M6P+30 TYPE RESIDENTIAL TOWERS for Mr. KHALID AL GHURAIR at Al Nahda, Sharjah

FAST BUILDING CONTRACTING


B+G+M6P+30 TYPE RESIDENTIAL TOWERS for Mr. KHALID AL GHURAIR at Al Nahda, Sharjah

FAST BUILDING CONTRACTING


Tuscan Residence on Plot NO. JVC10BMRA 500, JVC10BMRA 700 & JVC10CMRA 700 at Jumeirah Village, Dubai DAMAC Properties






Enabling Works for International Financial Tower 4B+G+5P+H.C+48 Mechanical Level & International Financial Hotel 4B+G+5P+H.C+15 on Plot No. 103 Al Cornice/Al Ta'awon Roads Sharjah





PRINCIPAL & SUB CONTRACTORS

IGS Foundation Contracting abides with the philosophy of working hand-in-hand with pre-approved suppliers and sub-contractors. It builds strong, long-lasting relationship on the basis of mutual respect, trust and integrity, which has made the relationship resilient. It inculcates to partner with its principal and subcontractors in achieving its commitment to its client.

IGS offers opportunities for sub-contractors, who are key components of the services it offers to its clientele. Sub-contractors qualifications and credibility are verified to ensure that they share in IGS’s commitment to quality workmanship, safety, timely completion of its projects and most specifically customer’s satisfaction.

Realizing the significance of supplier/ subcontractor relationship management to the service of the business, IGS maintains a balance of control in its association with them. It works hard to maintain the efficiency & reliability of its supply network that positions IGS above others in the market. Despite the existence of adverse effects in the economic situation, IGS ensures that vendors / subcontractors are paid in accordance with its agreement in order to promote a harmonious relationship. IGS acknowledges that by doing so, it ultimately affects the company’s competitiveness and credibility in the market.

To name a few of the key principals and sub contractors who all these years had partnered TMF in accomplishing its commitment to its clients:

I. REINFORCEMENT STEEL/U BEAMS 1. Cicon Building Materials

2. Alam Steel

3. Steelfab

4. Al Rostamani Building Materials Trading LLC

PRINCIPAL & SUB CONTRACTORS C II. CONCRETE MIX 1. AL FALAH READY MIX 2. CEMEX 3. Golden Ready Mix

III. CONCRETE PANEL 1. Mammut Technocreate F.Z.E 2. Dubai Precast LLC

IV. EXCAVATION SUB CONTRACTOR 1. Ghassan Transport 2. Al Sadaqa Transportation 3. Shaheen Cement Products Factory LLC

V. DEWATERING 1. Action Dewatering 2. WJ Dewatering Limited

Documents

I. COMPANY PROFILE - masy-global.com · I. COMPANY PROFILE A. About the organization ... Timsah International Foundation Contracting Saudi, Al Joffe Contracting Dubai, and AIC Contracting