Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
IDENTIFICATION SOLUTIONS
Page no.Where you can find...
The advantages for you…
Our aim is to provide our customers with a complete range ofidentification products. If the item you are seeking is not shown in our catalogue, please call us, our wide knowledge of the industry may enable us to source or recommend a solution.
Stock catalogue items are available ‘off the shelf’ for immediate despatch.
To ensure that you obtain the correct product for your requirements, we can offer technical advice and site visits.
Quality Assurance Policy
It is Beaverswood’s aim, to supply you with a quality, cost effective, labelling solution to meet your individual requirements.
Exceeding the high standards expected by our customers, calls for a systematic and disciplined approach by all employees to the principles of Quality Assurance. To this end, the company has an established Quality Management System, based on the requirements of BS EN ISO 9001:2008.
Total Quality Total ServiceBS EN ISO 9001:2008 Certificate No. 4692
Help & Assistance
InnovativeProducts
Ex-stockDelivery
Our fully trained in house team of installers, offer a professional, quality installation service throughout the UK.
InstallationService
Please see our product demonstrations by scanning the QR codes shown on the relevant pages or go to our youTube channel http://www.youtube.com/user/beaverswoodsupply
Product Demonstration Videos
IDENTIFICATION SOLUTIONS
26 2
Aisle Markers 6-9Anti-slip Tape 41Asset Tags 43Barcode Labels 4-5 8 12 20 36Bay Markers 9Clip on Pockets 31Code Labelling 4-5Colour Coded Beam Labelling 4-5Consecutive Number Tiles 25Custom Printed Signs & Labels 46Document Display 28-29Document Pockets 30-32Double sided Tape 19Drywipe Boards 47Floor Graphic Markers 22Floor Lane Marking Tape 40Floor Location Labels 20Floor Marking Paint 38Floor Signals 21Frames4docs 28-29Hanging Markers 8Hanging Pockets 32Identification Tiles 25Information Labels 11Label Holders 14-15Lane Marking 40Location Labelling 4-5Location Markers 17Magnetic Early Learning Tiles 33Magnetic Easy Wipe Racking Strip 18Magnetic Frames 28Magnetic Label Holders 14Magnetic Location Markers 17Magnetic Numbers & Letters 24Magnetic Paper 33Magnetic Pockets 30Magnetic Self-adhesive Strip 19Magnetic Ticket Holders 13Magnetic Tiles 25Magnetic Whiteboards 47Magnetic Wrap-around Pockets 32Memo Magnets 33Message Markers 23Metal Tags 42Numbers & Letters 24-27Pallet Marker 23Pallet Topper 37Pick Bin Flexi Pockets 36Plastic Tags 42Printed Boards 47Racking Strip 18racksack 34-35Ring Tags 23Safety Signs 42-46Self-adhesive Frames 29Self-adhesive Label Holders 15Self-adhesive Numbers & Letters 26-27Self-adhesive Pockets 30,32Self-adhesive Steel Tape 19Self-adhesive Ticket Holders 12Steel Tape 19Stencils 39Styrene Hanging Pockets 36SWL Labels 11Tags 42Ticket Holders 12-13Ticket Pouches 17Tie-on Pockets 31Tote Bin Labels 36Tri Markers 8Weight Load Notices 10-11Weight Load Templates 48-50Wet Wipe Marker Pens 18Waste Management Sacks 34-35Wire Shelving Clip Holder 16
Contents
Description Page no.
4Location Labelling
6Aisle Identification
10Racking Safety
12Rack Identification
20Floor Identification
19Fixings
24Numbers & Letters
30Document Pockets
34Warehouse Recycling
28Document Display
36Bin & Trolley Identification
33Magnetic Accessories
37Pallet Protection
38Floor Marking
41Anti-slip Flooring
43Signage & Labelling
42Industrial Tags
Load Notice Templates
47Information Boards
48
3
4
Installation Service available
Low volume print runs available
Clear identification
A-02-D 2RackColour Level PositionBay
Our own in-house installation teams are supervised by a Project Manager who is onsite for the duration of the installation. The Project Manager will liaise with the client throughout to ensure that aprofessional, quality service is provided.
Design, manufacture & installation of code labels
Quantity of labels/Number of locations
Typical code
Colour requirement
Appromixate label sizeHeight to top beam - For install purposes
We offer an on site consultation service provided by our Project Managers, who will design a labelling solution to meet your particular system requirements.
To book your consultation please call our sales office. If you already know your requirements – then contact us for a quotation with the following data;
The management of a modern warehouse needs clear and precise identification that can be quickly and easily understood by all concerned.As specialists in the design, manufacture andinstallation of code labels we provide a cost effective solution to all your labelling needs.
Custom printed to your design
Can include bar codes & colour coding
On-site consultations
Installed by our in-house team
Warehouse Labelling
See page 9 for Bay Markers
Location Labelling
Materials & Colour Coding
5
To maximise your traffic flow & minimise costly picking errors call our sales office to book your on-site consultation
A wide variety of base materials are available for the manufacture of hard wearing code labels including:
Colour coding offers an additional high visibility quick check facility
Coloured Vinyls
Polypropylene
Deep Freeze
Magnetic
PVC
Styrene
See page 20 for Floor Location Labels
Location Labelling
Watch the video
Custom made markers can also be manufactured to show company logos,
6
Angled Aisle Markers
See page 27 for Self-adhesive Numbers & Letters
Aisle Identification
Please specify sequencing & colour option when ordering
Angled aisle markers for good visibility
Our range of highly visible angled aisle markers are available with either magnetic or self-adhesive fixings and come in a choice of white or yellow.
Included in the price, the AM1F is supplied with one self-adhesive printed label for the user to apply, the label can be applied to the front or back depending if the marker is to be used right or left handed.
The AM1T is supplied with two printed labels.
Choice of fixing -Magnetic or Self-adhesive
Price includes printing of characters
Ref Size (mm h x w) Characters Fixing ColourAM1F 95 x 130 Up to 3 Self- White/ characters Adhesive YellowAM1FM 95 x 130 Up to 3 Magnetic White/ characters YellowAM1T 95 x 130 x 130 Up to 3 Self- White/ characters Adhesive Yellow on each side AM1TM 95 x 130 x 130 Up to 3 Magnetic White/ characters Yellow on each side
High visibility marker for shelving
This aisle marker is the ideal, highly visible and economical solution for shelving aisle and bay identification. The marker is supplied pre-drilled in 4 corners for cable tie or screw fixing. Alternatively our Magnetic Self-adhesive Strip can be applied to the rear of the marker for quick and easy fixing – see page 19.
Price includes printing of up to 3 characters
Ref Size (mm h x w) Characters ColourAM1 95 x 160 Up to 3 characters White/Yellow
Shelving Aisle Marker
AM1T / AM1TM (Angled)
AM1F / AM1FM (Flag)
Custom made markers can also be manufactured to show company logos, various colours, and different sizes. Please contact our sales offices for further details.
Aisle & Bay I.D. Markers
7See page 34 for Racksack
Aisle Identification
Markers to identify aisles or bays
Our range of robust end of aisle identificationmarkers are available in various sizes and designs for instant product and aisle locating. Suitable for use in factory, warehouse or office environments.
Bespoke markers can be manufactured incorporating directional arrows, logos, and entry/no entry symbols etc. Contact our sales officefor further details.
Supplied pre-drilled unless stated
Improves identification
Prices include printing of required characters up to the maximum allowed
Ref Size (mm h x w) Characters ColourAM2/1 220 x 270 With 1 x 180mm Yellow/WhiteAM2/2 220 x 270 With 2 x 180mm Yellow/WhiteAM3/1 220 x 450 With 1 x 180mm Yellow/WhiteAM3/2 220 x 450 With 2 x 180mm Yellow/WhiteAM3/3 220 x 450 With 3 x 180mm Yellow/WhiteAM3X/1 300 x 300 With 1 x 180mm Yellow/WhiteAM3X/2 300 x 300 With 2 x 180mm Yellow/WhiteAM4 660 x 343 With 1 x 500mm YellowAM6/1 600 x 600 With 1 x 450mm Yellow/WhiteAM6/2 600 x 600 With 2 x 450mm Yellow/White
AM2/2
AM3/3
AM6AM4
SJ SK
Watch the video:
Identify block stack areas & aisles, etc.
Designed to identify areas from above, rather than marking the floor or using freestanding signs, these large V angled marker signs give clear identification for codes and barcodes. Manufactured in rigid 3mm styrene with black print on a white sign.
2 standard sizes are available with a face area of 686mm(h) x 660mm(w) or 343mm(h) x 660mm(w). Special sizes are also available.
Each sign has chain locating holes and chains are available as an optional extra. To obtain prices and further details please call the sales office.
Highly visible
Standard sizes & specials available
Ref Size (mm h x w)
VM66 686 x 660VM63 343 x 660
3 Way Marker
Chain with hooks
High visibility for aisle & block stacking areas
3 way hanging markers allows clear all roundidentification for aisles and block stacking areas within the workplace. Price includes the printing of either 1 or 2 digits per side. Please specify digits required when ordering, can be alpha or numerical digits.
The 2mm zinc plated chain is sold in 1m lengths complete with ‘con hook’ (open large bow) at each end. Numerous lengths can be attached to each other to form the length required.
Available with 1 or 2 digits per side
Tri-Markers
Each panel/side is 220mm(h) x 270mm(w)
Printed to your design
Ref DimensionsCH1/2 1m long x 2 lengthsCH1/3 1m long x 3 lengthsCH1/10 1m long x 10 lengthsCH1/50 1m long x 50 lengthsCH1/100 1m long x 100 lengths
Ref No. of digits per sideAMH2/1 1AMH2/2 2
Ordering information: If you require a hanging length of 2m you would require 2 x ref CH1/3.You would be supplied with 6 x 1m pieces to create 3 x 2m lengths.
Panels are available in black on yellow or black on white. Please specify when ordering.
8
Hanging V Markers
See page 37 for Pallet Topper
Aisle Identification
Clear Identification
Our high visibility Bay Markers offer clearidentification throughout the warehouse. A formed aluminium section with either a magnetic or self-adhesive edge, enables the marker to be easily mounted onto steel racking without drilling. When locations need to be changed the magnetic marker can simply be lifted and relocated.
High visibility black on yellow vinyl character for above.
The characters can be applied to the front and back of the marker allowing the location to be viewed from both sides.
Fixed or relocated in seconds
No drilling required
Please select type and size of marker and add on required character - Specify letter or number and quantity required
Please note: You may wish to apply characters to each side of the marker.
Ref Fixing Size (mm h x w) AccommodatesBM1 Magnetic 260 x 167 1 characterBM2 Magnetic 260 x 310 2 characterBA1 Self-adhesive 260 x 167 1 characterBA2 Self-adhesive 260 x 310 2 character
High Visibility Characters
Magnetic Self-adhesive
BM2 / BA2
Magnetic & Self-adhesive Bay Markers
9See page 23 for Pallet Markers
Aisle Identification
A-Z & 0-9 characters available, please confirm which characters and quantities required when ordering.
Ref Size (mm h x w) Digit Height (mm)
F8 230 x 140 160
BA2 - 2 character Bay Marker
BA1 - Front view BA2 - Rear view with character applied
Signs to identify weight loadings & procedures
Five tough and durable PVC weight load notices, detailing the procedures for the maintenance of racking structures. The range covers shelf/pallet racking, cantilever racking, drive-thru racking and mezzanine floors.
Our BLS5 is in line with the latest Health & Safety recommendations. The sign can be overprinted with your corporate logo, address and contact details.
Choice of 5 different designs
Supplied blank from stock
Price also includes black printing withcontact details & loadings
Ref Suitable for Size (mm h x w)
BLS1 Pallet Racking 356 x 254BLS2 Cantilever Racking 356 x 254BLS3 Drive Thru’ Racking 356 x 254BLS4 Mezzanine Floor 356 x 254BLS5 Pallet Racking 470 x 350
All of our weight load notices can be colour printed with your logo, etc. (Subject to minimum quantity). Please call for further details.
For easy ordering, templates for our BLS1 and BLS5 can be found on pages 48 and 49. Simply enter your details and forward them together with your purchase order.
Alternatively we can email these and other templates to you. Please call with your details.
BLS5
BLS1
BLS1 BLS2
BLS3 BLS4
10 See page 48 for Weight Load Templates
Racking Safety
Weight Loading Identification
Our highly visible labels were originally designed to highlight Max UDL or SWL on shelving and pallet racking beams, but these labels can be used virtually anywhere and on most surfaces.
Simply select the size you require, confirm the text, pictograms, colour and quantity required. Four stand-ard sizes are offered however other sizes are available.
Price includes printing to your design
Choice of 4 standard sizes
Black text on white or yellow background
Highly visible information labels
Please note there is a minimum order value of £25
* Print may appear on two lines
Ref Size (mm h x w) ColoursBL23 25 x 200 White/YellowBL53 50 x 300 White/YellowBL73* 70 x 300 White/YellowBL93* 90 x 300 White/Yellow GOODS IN BAY
YOUR COMPANY NAME HERE
1200 KgUNIFORMLY DISTRIBUTED
LOAD PER LEVEL
KEEP ALL LIMBSINSIDE CAB
Magnetic & Self-adhesive Information Labels
11See page 4 for Warehouse Labelling
Racking Safety
Self-adhesive
Ref Size (mm h x w) ColoursBL23M 25 x 200 White/YellowBL53M 50 x 300 White/YellowBL73M* 70 x 300 White/YellowBL93M* 90 x 300 White/Yellow
Magnetic
Horizontal format load notices
These racking and shelving landscape style weight load notices are built to last using 1.5mm thick white rigid styrene. These hi-impact notices allow for all the relevant information pertaining to the safe load limits and can be supplied blank or printed with black text at no extra charge. (Colour print is also available subject to quantity).
Both of these notices are in line with the latest Health and Safety recommendations.
Templates can be e-mailed so that you can enter your details and return to us with your purchase order.
Choice of 2 standard designs
Supplied blank or printed with black text at no extra charge
Ref Suitable for Size (mm h x w)
BLS6 Pallet Racking 297 x 420BLS7 Shelving 215 x 220
BLS6
BLS7
Weight Notices - Horizontal
Self-adhesive Ticket Holders
For non standard heights, widths or coloured profiles please contact our sales office for a personalised quotation.
Ref Size Pack White Cards Included TS210 25mm x 100mm 100 TS220 25mm x 200mm 50 TS25/10 25mm x 1M 10 TS25/20 25mm x 2M 10 TS25/60 25mm x 2M 30 TS25/100 25mm x 2M 50 TS25/250 25mm x 2M 125 TS310 38mm x 100mm 100 TS320 38mm x 200mm 50 TS38/10 38mm x 1M 10 TS38/20 38mm x 2M 10 TS38/60 38mm x 2M 30 TS38/100 38mm x 2M 50 TS38/250 38mm x 2M 125
Printed Inserts
Pull-forward front allows easy loading & updates of information
Pre-cut sizes from stock
Barcodes can be scanned without removing the insert
Ideal for permanent locations on shelving & racking
Special sizes on request (up to 3m lengths)
With a choice of 4 heights this clear PVC strip is supplied with an aggressive adhesive backing for permanent locations.
Why waste time printing your own labels or runthe risk of picking errors caused by unclearidentification? We have the ability to print inserts which will give clear and highly visible identification. The inserts can include alpha, numeric, directional arrows and barcodes, etc.
Please call our sales office for prices and further information.
Self-adhesiveTicket Holder ProfilesHeight in mmActual size:
25 38 54 80
D003D004
D005
Self-adhesive Ticket Holders Cont.
Ref Size Pack White Cards Included TS510 54mm x 100mm 100 TS520 54mm x 200mm 50 TS54/10 54mm x 1M 10 TS54/20 54mm x 2M 10 TS54/60 54mm x 2M 30 TS54/100 54mm x 2M 50 TS54/250 54mm x 2M 125 TS810 80mm x 100mm 100 TS820 80mm x 200mm 50 TS80/10 80mm x 1M 10 TS80/20 80mm x 2M 10 TS80/60 80mm x 2M 30 TS80/100 80mm x 2M 50 TS80/250 80mm x 2M 125
Supplied in Lengths of up to 3 meters
12
Self-adhesive Ticket Holders
See page 29 Self-adhesive Frames4docs
Rack Identification
Watch the video
Pull-forward front allows easy loading & updates of information
Pre-cut sizes from stock
Barcodes can be scanned without removing the insert
Ideal for identifying locations on shelving & pallet racking
Special sizes on request (up to 3m lengths)
For non standard heights, widths or coloured profiles please contact our sales office for a personalised quotation.
Magnetic Ticket Holders
Ref Size Pack White Cards Included TS210M 25mm x 100mm 100 TS220M 25mm x 200mm 50 TS25M/10 25mm x 1M 10 TS25M/20 25mm x 2M 10 TS310M 38mm x 100mm 100 TS320M 38mm x 200mm 50 TS38M/10 38mm x 1M 10 TS38M/20 38mm x 2M 10 TS510M 54mm x 100mm 100 TS520M 54mm x 200mm 50 TS54M/10 54mm x 1M 10 TS54M/20 54mm x 2M 10 TS810M 80mm x 100mm 100 TS820M 80mm x 200mm 50 TS80M/10 80mm x 1M 10 TS80M/20 80mm x 2M 10
Aditional White Card InsertsRef Size Pack
TC210 25mm x 100mm 100 TC220 25mm x 200mm 50 TC250 25mm x 1M 10 TC310 38mm x 100mm 100 TC320 38mm x 200mm 50 TC350 38mm x 1M 10 TC510 54mm x 100mm 100 TC520 54mm x 200mm 50 TC550 54mm x 1M 10 TC810 80mm x 100mm 100 TC820 80mm x 200mm 50 TC850 80mm x 1M 10
Magnetic Ticket Holder ProfilesHeight in mmActual size:
In a choice of 4 heights this clear PVC strip is supplied as a magnetic option which offers the flexibility to change locations and is ideal for cold storage applications.
25 38 54 80
Magnetic Ticket Holders
13See page 18 for Magnetic Racking Strip
Rack Identification
Supplied in Lengths of up to 3 meters
Watch the video
14
Magnetic Label Holders
See page 24 for Magnetic Numbers & Letters
Rack Identification
Standard sizes supplied from stock
Instant & highly visible identification
Card & PVC Inserts - For magnetic & self-adhesive Label Holders
Additional card and PVC inserts are available for the label holders.
Please specify whether it is to be used with the self-adhesive or magnetic holders.
Our magnetic and self-adhesive label holders are supplied from stock in pre-cut lengths but special sizes can be supplied on request. Each holder is supplied with white card inserts and a cover strip. Pre-printed inserts can also be supplied for each of the holders incorporating barcodes and location codes. Please contact our sales office for further details.
Magnetic are ideal for applications where regular changes are required, easier and quicker to move then adhesive backed holders. They are also suitable for use in cold stores.
Easy to update & move
For non standard widths please contact our sales office for a personalised quotation.
Magnetic Label Holder ProfilesHeight in mmActual size:
15
10
8020
50
60
70
40
30
25
Magnetic Label Holders Magnetic Label Holder RollsRef Size (h x w) Qty/PackML18X 10 x 80mm 100 ML18 15 x 80mm 100 ML28X 20 x 80mm 100 ML28 25 x 80mm 100 ML38 30 x 80mm 100 ML48 40 x 80mm 100 ML58 50 x 80mm 100 ML610 60 x 100mm 100 ML620 60 x 200mm 50 ML710 70 x 100mm 100 ML720 70 x 200mm 50 ML820 80 x 200mm 50 ML150X 10 x 500mm 20 ML150 15 x 500mm 20 ML250X 20 x 500mm 20 ML250 25 x 500mm 20 ML350 30 x 500mm 20 ML450 40 x 500mm 20 ML550 50 x 500mm 20 ML650 60 x 500mm 20 ML750 70 x 500mm 20 ML850 80 x 500mm 20 ML1X/10 10mm x 1m 10 ML1/10 15mm x 1m 10 ML2X/10 20mm x 1m 10 ML2/10 25mm x 1m 10 ML3/10 30mm x 1m 10 ML4/10 40mm x 1m 10 ML5/10 50mm x 1m 10 ML6/10 60mm x 1m 10 ML7/10 70mm x 1m 10 ML8/10 80mm x 1m 10
Ref Size (h x w) Qty/PackMLR1X/5 10mm x 5m 1 MLR1/5 15mm x 5m 1 MLR2X/5 20mm x 5m 1 MLR2/5 25mm x 5m 1 MLR3/5 30mm x 5m 1 MLR4/5 40mm x 5m 1 MLR5/5 50mm x 5m 1 MLR6/5 60mm x 5m 1 MLR7/5 70mm x 5m 1 MLR8/5 80mm x 5m 1 MLR1X/10 10mm x 10m 1 MLR1/10 15mm x 10m 1 MLR2X/10 20mm x 10m 1 MLR2/10 25mm x 10m 1 MLR3/10 30mm x 10m 1 MLR4/10 40mm x 10m 1 MLR5/10 50mm x 10m 1 MLR6/10 60mm x 10m 1 MLR7/10 70mm x 10m 1 MLR8/10 80mm x 10m 1 MLR1X 10mm x 50m 1 MLR1 15mm x 50m 1 MLR2X 20mm x 50m 1 MLR2 25mm x 50m 1 MLR3 30mm x 50m 1 MLR4 40mm x 50m 1 MLR5 50mm x 50m 1 MLR6 60mm x 50m 1 MLR7 70mm x 50m 1 MLR8 80mm x 50m 1
Card InsertsRef Description Size (mm h x w) Qty/Pack LC820 Card Insert 80 x 200 50 LC150X Card Insert 10 x 500 20 LC150 Card Insert 15 x 500 20 LC250X Card Insert 20 x 500 20 LC250 Card Insert 25 x 500 20 LC350 Card Insert 30 x 500 20 LC450 Card Insert 40 x 500 20 LC550 Card Insert 50 x 500 20 LC650 Card Insert 60 x 500 20 LC750 Card Insert 70 x 500 20 LC850 Card Insert 80 x 500 20
Ref Description Size (mm h x w) Qty/PackLC18X Card Insert 10 x 80 100 LC18 Card Insert 15 x 80 10 LC28X Card Insert 20 x 80 100 LC28 Card Insert 25 x 80 100 LC38 Card Insert 30 x 80 100 LC48 Card Insert 40 x 80 100 LC58 Card Insert 50 x 80 100 LC610 Card Insert 60 x 100 100 LC620 Card Insert 60 x 200 50 LC710 Card Insert 70 x 100 100 LC720 Card Insert 70 x 200 50
Easy to update & cut to size
New sizes added
Available in rolls of up to 50 metres
Self-adhesive Label Holders
15See page 6 for Aisle Markers
Rack Identification
Label Holders & Inserts are available from stock for immediate dispatch
Standard sizes supplied from stock
Instant & highly visible identification Self-adhesive offers a long term option of fixing label holders and more stability in environments where the labels need to be changed frequently.
The smaller holders are an ideal solution for the identification of pigeon holes, whilst the larger holders also suit environments such as offices, libraries and schools.
Ideal for more permanent environments
Available in lengths of up to 3 metres
AL58
AL38
AL18
Long term for stable environments
PVC Inserts
Self-adhesive Label Holders
Ref Description Size (mm h x w) Qty/Pack LP18X PVC Insert 10 x 80 100 LP18 PVC Insert 15 x 80 100 LP28X PVC Insert 20 x 80 100 LP28 PVC Insert 25 x 80 100 LP38 PVC Insert 30 x 80 100 LP48 PVC Insert 40 x 80 100 LP58 PVC Insert 50 x 80 100 LP610 PVC Insert 60 x 100 100 LP620 PVC Insert 60 x 200 50 LP710 PVC Insert 70 x 100 100 LP720 PVC Insert 70 x 200 50
Ref Description Size (mm h x w) Qty/PackLP820 PVC Insert 80 x 200 50 LP150X PVC Insert 10 x 500 20 LP150 PVC Insert 15 x 500 20 LP250X PVC Insert 20 x 500 20 LP250 PVC Insert 25 x 500 20 LP350 PVC Insert 30 x 500 20 LP450 PVC Insert 40 x 500 20 LP550 PVC Insert 50 x 500 20 LP650 PVC Insert 60 x 500 20 LP750 PVC Insert 70 x 500 20 LP850 PVC Insert 80 x 500 20
Self-adhesive Label Holder ProfilesHeight in mmActual size:
15
50
30
Ref Size (h x w) Qty/Pack AL18 15 x 80mm 100 AL38 30 x 80mm 100 AL58 50 x 80mm 100 AL1/10 15mm x 1m 10 AL3/10 30mm x 1m 10 AL5/10 50mm x 1m 10
For non standard widths please contact our sales office for a personalised quotation.
16
Wire Shelving Clip Holder
See page 23 for Ringtags
Rack Identification
Each holder is 43mm high x 75mm wide overall, supplied in packs of 12 or 50 with white card inserts.
Suits wire shelves with maximum height of 35mm.
Easily identify locations on wire shelving
Pull forward front for loading & updating
Scan barcodes without removing them
Identifying locations on wire mesh shelving is
difficult as traditional magnetic or self-adhesive
holders do not suit wire mesh shelving. This holder
solves the problem by using a quick and easy to use
“clip-on” system. This versatile holder can be used in
three different formats straight for shelves that are
eye level, approx 33° for lower shelves and approx
45° for the very bottom shelf enabling easy reading.
Ref PackWSC47/12 12WSC47/50 50
Multi-position, flat or choice of 2 angled settings
Position 1 : Straight on
Position 2 Easy to clip on
Supplied with white card
Position 3
Magnetic & Self-adhesive Ticket Pouches
Magnetic Easy Wipe Location Markers
17See page 30 for Magnetic Document Pockets
Rack Identification
Write on – Wipe off
Quick and easy relocation
Locates on steel surfaces
Ref Size (mm h x w) Pack
LM18 10 x 80 100 LM158 15 x 80 100 LM28 20 x 80 100 LM258 25 x 80 100 LM38 30 x 80 100 LM48 40 x 80 100 LM58 50 x 80 100 LM310 30 x 100 100 LM410 40 x 100 100 LM510 50 x 100 100 LM610 60 x 100 100 LM710 70 x 100 100 LM810 80 x 100 100 LM105 56 x 105 100 LM515 50 x 150 100 LM815 80 x 150 100 LM1015 100 x 150 100 LM520 50 x 200 100 LM820 80 x 200 100 LM1020 100 x 200 100 LM219 90 x 210 10
White magnetic location markers supplied in single sized markers. Use a wet-wipe marker pen, write on, update and move when required. These pre-cut markers offer a quick and easy high visibility system of identifying locations, products or stock quantity’s etc.
Clear front enables barcodes to be scanned
Supplied complete with white card inserts
Cost effective ticket pouches
An economical range of flexible p.v.c. ticket pouches, which have a clear p.v.c. front and yellow back designed for use on racking and shelving. The pouch opens at the top and the side for easy access to the insert. The clear front also enables barcodes to be scanned without removing the ticket. The self-adhesive pouch enables it to be permanently fixed, whereas the magnetic versions can be easily relocated without removing the ticket.
Special sizes available
Not to scale
New size addedRef Description Size (mm h x w) Pack
SAP310 Self-adhesive 30 x 100 100SAP412 Self-adhesive 40 x 120 100SAP610 Self-adhesive 60 x 100 100SAP614 Self-adhesive 60 x 140 100MP310 Magnetic 30 x 100 100MP412 Magnetic 40 x 120 100MP610 Magnetic 60 x 100 100MP614 Magnetic 60 x 140 100
Watch the video
Watch the video
18
Magnetic Easy Wipe Racking Strip
See page 6 for Shelving Aisle Marker
Rack Identification
Easily cut to size
Cost effective
Write On – Wipe Off The magnetic easy wipe racking strip provides a fast and cost effective updating system for identifying product codes and stock level information, etc.
Easily cut to size
Black matt finish
This multi-purpose black magnetic strip can be used to help colour coding identification, gridding tape and also offer the possibility of stamping out any desired characters or shapes.
Our black Marker Pen is unlike most marker pens due to its unique Wet Wipe quality. Most pens of this type are either permanent or wipe off, whereas the Beaverswood pen’s ink, once dried, needs a damp cloth for it to be removed. Using permanent ink removes the benefit of having a reusable label and using a pen with removable ink means that the text can be removed by accident by someone touching the label as they pass.
Ref Size Pack
MSR1 10mm x 10M 1 MSR15 15mm x 10M 1 MSR2 20mm x 10M 1 MSR25 25mm x 10M 1 MSR3 30mm x 10M 1 MSR4 40mm x 10M 1 MSR5 50mm x 10M 1 MSR6 60mm x 10M 1 MSR7 70mm x 10M 1 MSR8 80mm x 10M 1 MSR9 90mm x 10M 1 MSR10 100mm x 10M 1
Ref Size Pack
MSR1BK 10mm x 10M 1 MSR15BK 15mm x 10M 1 MSR2BK 20mm x 10M 1 MSR25BK 25mm x 10M 1 MSR3BK 30mm x 10M 1 MSR4BK 40mm x 10M 1 MSR5BK 50mm x 10M 1 MSR6BK 60mm x 10M 1 MSR7BK 70mm x 10M 1 MSR8BK 80mm x 10M 1 MSR9BK 90mm x 10M 1 MSR10BK 100mm x 10M 1
Ref Description
PB/5 Pack of 5 - black PB/10 Pack of 10 - black
Available in Blue (B), Green (G), Red (R), White (W) & Yellow (Y) - Please add colour ref to code when ordering Supplied in packs of
5 or 10
Available in 12 widths - Cut to required length
30mm
50mm 70mm 90mm
20mm
Black Magnetic Strip
Wet Wipe Marker Pens
Watch the video
Magnetic Self-adhesive Strip
19See page 11 for Weight Load Notices
Fixings
Multi-purpose fixing tape
Choice of 2 sizes
Ref Size (h x w)
DST12 12mm x 50m DST19 19mm x 50m
Available from stock
Supplied in either 12mm or 19mm wide in 50 metre rolls. This very aggressive tape is ideal for fixing signs and markers within the workplace.
Available in 2 widths
Double-sided Adhesive Tape
Makes anything magnetic
Locates on any steel surface
No drilling required
Industrial quality - 1.5mm thickness
Ref Size (h x w) Adhesive
MSSA/13 13mm x 30m Premium MSSA/20 20mm x 10m Foam MSSA/50 50mm x 10m Foam
Our Magnetic strip is supplied in three widths, each backed with a strong permanent self-adhesive for mounting items onto steel surfaces. This magnetic strip is ideal for many jobs in the factory orwarehouse, eliminating the need for drilling or other methods of fixing.
Available in 3 widths
Easy to cut to size
Available in 3 sizes
Used for circumstances where metal surfaces are not present
Self-adhesive Steel Tape
Ref Size (h x w)
ST/12 12mm x 30m ST/20 20mm x 30m ST/25 25mm x 30m
Our self-adhesive steel tape allows non-metallic surfaces to accept magnetic products.
Typical usage would be to attach steel tape to the surface, the strip is now ready to accept magnetic items such as our Magnetic Self-adhesive Strip and Memo Magnets etc. This can then be removed/replaced as many times as required just from one fixing.
Allows non-metallic surfaces to accept magnetic products
Floor Identification Markers
Designed totally to your specification
Tough & durable
High visibility location labels
Our high visibility floor location labels are suitable to identify areas of the warehouse or factory floor. The labels can be totally customised for identification of pallet positions, item numbers and any specific area such as packing and quarantine areas, etc.
Printed to your design, the labels have anaggressive self-adhesive backing to withstandthe everyday traffic in the workplace.
To obtain a price please simply provide the following information:
SizeColour Text
Barcodes or graphics details
Quantity
Other design suggestions
Typical designs
20
Floor Location Labels
See page 8 for Tri Markers
Floor Identification
Designed to identify aisle, bay or other warehouse floor areas
Each marker is 190mm diameter
Hi-visibility floor markers
Available in A-Z & 0-25
These high visibility floor markers have been
designed to cope with the daily stress’s and strains
of a modern warehouse. All our markers incorpo-
rate a permanent aggressive adhesive backing and
can be used not just on the floor but any dry, clean
flat sealed surface. The 190mm diameter markers
are printed with a bold black digit on a yellow
background in letters A-Z or numbers 0-25.
Ref Size (diameter) Background Colour
FMC/- (state digit) 190mm Yellow
Floor Signalling
21See page 41 for Anti-slip Tape
Floor Identification
Tough PVC with an aggressive adhesive
Capable of withstanding everyday traffic of a fully operational warehouse
A simple but effective solution for marking areas on the warehouse floor
Available in 6 colours
To further aid demarcation our floor signs are available in black, white, yellow, red, green and blue.
Please specify colour required when ordering.
Dimensions in mm
For walkways, pallet storage & general floor markingA range of inexpensive high visibility signals to highlight walkways, traffic flow, pallet positions and general marking on the warehouse floor.
The markers are suitable for application onto a clean, flat, sealed surface.
For centre pallet positions
For between pallets
For walkways
To indicate direction of traffic flow or position
To indicate walkways or traffic flowSupplied in packs of 10 - 5 left, 5 right
Corner for marking out block stack pallet areas
90 90
90
FS/O FS/A300
300
200
300
100
200
FS/+ FS/T FS/L
200
FS/F
300
Ref Shape Size (mm h x w) Pack Colour
FS/+ 300 x 300 10 Black, White, Yellow Red,Green, Blue
FS/T 200 x 300 10 Black, White, Yellow Red,Green, Blue
FS/L 200 x 200 10 Black, White, Yellow Red,Green, Blue
FS/O 90mm 100 Black, White, Yellow Diameter Red,Green, Blue
FS/A 90 x 90 100 Black, White, Yellow
Red,Green, Blue
FS/F 300 x 100 10 Black, White, Yellow Red,Green, Blue 5 left / 5 right
Watch the video
22
Floor Graphic Markers
See page 43 for Asset Tags
Floor Identification
Designed to highlight warnings orspecial requirements
Each sign is 430mm diameter
Hi-visibility graphic floor signs
Ref Size (diameter)
FM01 - FM30 430mm
Each of the highly visible markers are printed onto the underside of a clear PVC film and then laminated on the back surface with an aggressive permanent adhesive.
They are suitable for use on dry, clean, flat sealed surfaces and although designed for the floor, the markers can be used on walls or anywhere a tough permanent sign is required.
Can be used on floors & walls
Other designs can also be printed. Please contact the sales office for further details.
Watch the video
Ring Tags
23See page 15 for Self-adhesive Label Holders
Stock Identification
Identifying stock on pallets has always been a problem. Our Pallet Marker is designed to fit securely around the corner upright of a Euro pallet, yet will adjust to fit most other pallets. Manufactured in flexible white PVC, this unique Pallet Marker can be written on with a marker pen, or labels can beadhered to the smooth surface.
Message Markers
Pallet Marker
Identification hanging plates suitable for wire shelving & cages, etc.
Supplied plain for writing on, alternatively printed labels printed to your design are available separately
Printed labels are priced on application please phone for details
RT2/1 & RT2/2 are only supplied with 1 or 2 digits max
Highly visible identification for pallets/products Choice of fixing options available Helps deter double stacking of pallets
As goods, boxes, cartons, pallets and crates are moved or stored in the warehouse, there are times when a message is needed either to identify or instruct the user as to what the goods are or what action needs to be taken.A message marker can provide a quick and easy solution. These high visibility yellow or white markers can be printed with your message or supplied plain for use with a wet wipe pen.There are two types of marker; an L shape angled marker (MES1) that gives a message area on one surface, and a V shaped marker (MES2) that has a message area on two surfaces. Both types of message marker have the option of being freestanding or having a self-adhesive or magnetic base. Both types of markers are sold in packs of five either blank or with identical black text. Please confirm print/text when ordering.
Ref Size (mm h x w) Character Pack RT2/1* 220 x 270 1 1 RT2/2* 220 x 270 2 2 RT1116 110 x 160 N/A 10 RT72 70 x 200 N/A 25 RT38 35 x 80 N/A 50 RT415 45 x 150 N/A 50
Please specify digit(s) required when ordering.* Price includes printing of maximum characters allowed.
MES1Y Price includes printing MES2Y Price includes printing
RT1116
RT2/2 RT38
Ref Fixing Size (mm h x w) Colour Pack MES1W Freestanding 110 x 95 White 5 MES1Y Freestanding 110 x 95 Yellow 5 MES1W/SA Self-adhesive 110 x 95 White 5 MES1Y/SA Self-adhesive 110 x 95 Yellow 5 MES1W/M Magnetic 110 x 95 White 5 MES1Y/M Magnetic 110 x 95 Yellow 5 MES2W Freestanding 140 x 95 White 5 MES2Y Freestanding 140 x 95 Yellow 5 MES2W/SA Self-adhesive 140 x 95 White 5 MES2Y/SA Self-adhesive 140 x 95 Yellow 5 MES2W/M Magnetic 140 x 95 White 5 MES2Y/M Magnetic 140 x 95 Yellow 5
Enables quick & easy identification of pallets
Adjustable fit
Water, grease & oil resistant
Ref Size (mm h x w) Pack PM/50 75 x 470 50
24
Magnetic Numbers & Letters
See page 13 for Magnetic Ticket Holder
Numbers & Letters
Available in 23 & 43mm tile heights
Two tile heights, either 43mm with a 39mm high digit or 23mm with a 17mm high digit
Available with black digits on a white or yellow background
Allows for fast & easy labelling on any steel surface
Die-cut A4 sheets
Each sheet consists of the following characters:(Excludes arrows, commas and full stops etc.)
23mm Numbers0x31 1x31 2x17 3x17 4x17 5x17 6x17 7x17 8x17 9x17
23mm LettersAx12 Bx6 Cx8 Dx7 Ex21 Fx7 Gx7 Hx6 Ix16 Jx4Kx5 Lx7 Mx8 Nx12 Ox12 Px5 Qx3 Rx9 Sx8 Tx9 Ux8 Vx7 Wx3 Xx2 Yx2 Zx4
43mm Numbers0x11 1x10 2x5 3x5 4x5 5x5 6x5 7x5 8x5 9x5
43mm LettersAx3 Bx2 Cx2 Dx2 Ex4 Fx2 Gx2 Hx2 Ix3 Jx1Kx1 Lx2 Mx2 Nx3 Ox2 Px2 Qx1 Rx3 Sx3 Tx3 Ux3 Vx2 Wx1 Xx1 Yx1 Zx2
Magnetic tiles supplied on sheets as a combination of mixed alpha or numeric digits
Ref Size (mm) Type Colour M23MIXW/N 23mm(h) Numbers White M23MIXY/N 23mm(h) Numbers Yellow M23MIXW/L 23mm(h) Letters White M23MIXY/L 23mm(h) Letters Yellow M43MIXW/N 43mm(h) Numbers White M43MIXY/N 23mm(h) Numbers Yellow M43MIXW/L 43mm(h) Letters White M43MIXY/L 43mm(h) Letters Yellow
Consecutive Number Tiles
25See page 17 for Ticket Pouches
Numbers & Letters
Magnetic & Self-adhesive Identification Tiles
Magnetic Tiles
Sold in packs of individual characters these screen printed magnetic tiles can be used on a steel surface in the warehouse or office. The tiles are available in packs of 5 identical characters,A-Z and 0-9.
Cost effective low volume solution
Easily & quickly updated/relocated
Purchase only what you need
Printed black on yellow
Sets of high visibility self-adhesive labels from 01 through to 100
Instant Identification
Available from stock
Ref Size (mm h x w) Digit (mm h) Pack
CN23 30 x 25 20 1 CN50 50 x 50 40 1
Highly visible printed black on yellow or black on white (Please specify)
Printed to your design with 1 or 2 characters
Choice of self-adhesive for permanent locations or magnetic for frequently changing locations
Price includes printing
Please note there is a £25.00 minimum order for this product
Ref Size (mm h x w) Fixing PackTA50 50 x 50 Self-adhesive 1 TA70 70 x 70 Self-adhesive 1 TA90 90 x 90 Self-adhesive 1 TM50 50 x 50 Magnetic 1 TM70 70 x 70 Magnetic 1 TM90 90 x 90 Magnetic 1
Ref Size (mm h x w) Pack M7/ State character required 70 x 70 5
Self-adhesive Labels - Numbers
F characters come in 8 sizes
Supplied on sheets of identical characters
Available from StockClear identification
Yellow supplied as standard - Please specify when ordering.
Clean peel – leaves no residue
8 sizes supplied in handy complete packs of numbers or letters
Easy warehouse identification
Bin numbering
These self-adhesive numbers and letters are printed black on yellow or black on white
ensuring high visibility identification.
Simple to apply, they can be quickly removed and leave no adhesive residue. They
are suitable for a variety of uses throughout the warehouse including labelling of
shelves, racking, bins and other areas. They are also suitable for use in the office for
labelling files etc.Cards of identical characters
F7
F4
F4 F3
F6 F1
F2
F5
F5F8
Self-adhesive Labels - Letters
26
Quality Removable Self-adhesive Labels
See page 11 for Warehouse Information Labels
Numbers & Letters
Ref Label Size Character Characters Colours (mm h x w) Height (mm) Per Card
F1 Pack 0 - 9 9.5 x 6 6 168 Yellow/White
F2 Pack 0 - 9 12.5 x 8.5 9 90 Yellow/White
F3 Pack 0 - 9 19 x 14 16 36 Yellow/White
F4 Pack 0 - 9 38 x 21 26 12 Yellow/White
F5 Pack 0 - 9 56 x 21 50 12 Yellow/White
F6 Pack 0 - 9 90 x 38 75 6 Yellow/White
F7 Pack 0 - 9 130 x 45 100 5 Yellow
F8 Pack 0 - 9 230 x 140 160 1 Yellow
Ref Label Size Character Characters Colours (mm h x w) Height (mm) Per Card
F1 Pack A - Z 9.5 x 6 6 168 Yellow/White
F2 Pack A - Z 12.5 x 8.5 9 90 Yellow/White
F3 Pack A - Z 19 x 14 16 36 Yellow/White
F4 Pack A - Z 38 x 21 26 12 Yellow/White
F5 Pack A - Z 56 x 21 50 12 Yellow/White
F6 Pack A - Z 90 x 38 75 6 Yellow/White
F7 Pack A - Z 130 x 45 100 5 Yellow
F8 Pack A - Z 230 x 140 160 1 Yellow
Individual Sheets of Characters
27See page 20 for Floor Identification Markers
Numbers & Letters
Actual size:F8 : Background
ArrowsArrowsIndividual characters
Yellow supplied as standard - Please specify when ordering.
Minimum order of 20 individual cards. These can be mixed sizes, colours & characters.
Specify characters required.
Ref Label Size Character Characters Colours (mm h x w) Height (mm) Per Card
F1 9.5 x 6 6 168 Yellow/White
F2 12.5 x 8.5 9 90 Yellow/White
F3 19 x 14 16 36 Yellow/White
F4 38 x 21 26 12 Yellow/White
F5 56 x 21 50 12 Yellow/White
F6 90 x 38 75 6 Yellow/White
F7 130 x 45 100 5 Yellow
F8 230 x 140 160 1 Yellow
These highly adaptable numbers and letters
come in the following sizes:
(dimensions in mm h x w)
F1 9.5 x 6 168 per cardF2 12.5 x 8.5 90 per cardF3 19 x 14 36 per cardF4 38 x 21 12 per cardF5 56 x 21 12 per cardF6 90 x 38 6 per cardF7 130 x 45 5 percardF8 230 x 140 1 per card
Available in 8 sizes & 2 colours
Supplied on sheets of identical characters
Tough vinyl labels that are easyto apply, but will remove cleanly when necessary
Suits a multitude of needs
F6
F1F2
F3
F4 F7
F8
F5
Ideal for bin numbering
Eliminate costly errors caused by bad handwriting
Characters - Individual Sheets
F8 characters : for high visibility graphics
Ref Label Size Character Characters Colours (mm h x w) Height (mm) Per Card
F3 Arrows 19 x 14 16 36 Yellow/White
F4 Arrows 38 x 21 26 12 Yellow/White
F5 Arrows 56 x 21 50 12 Yellow/White
F6 Arrows 90 x 38 75 6 Yellow/White
28
Frames4docs
See page 19 for Steel Tape
Document Display
Frames4docs are a unique range of colour coded frames designed for easy and prominent document display.
Perfect for use in offices, shops, libraries and throughout the workplace to display all types of literature, certificates and informa-tion. Colour coded using black, blue, green, red and yellow, ideal for
displaying health and safety information, fire notices, charts and any other information that needs to be shown prominently.
Frames4docs are ideal for the portrayal of important information and act as perfect reminders for all staff in 5S and Lean Manufacturing.
The magnetic Frames4docs have a very strong pull force and can be applied to any flat steel surface. The design allows for easy insertion and removal of documents without the necessity of moving the frame. However if required, simply lift and relocate your document at will. The magnetic frame also enables a docu-ment to be displayed cleanly without the use of nails and pins that could possibly damage the fixing surface.
Ref To Hold Document Size Pack MFD2/10 A2 10 MFD3/10 A3 10 MFD4/10 A4 10 MFD5/10 A5 10
Magnetic
R
Frame any sign, chart or document in seconds
Quick and easy to update the stored documents
Magnetic or Self-adhesive fixing
To fit - A2, A3, A4 & A5
Vertical or Horizontal format
5 colours and mixed colour pack available
Available in 4 sizes, to fit - A2, A3, A4 & A5
Magnetic
Please confirm colour choice when ordering: Blue = B / Black = BK / Green = G / Red = R / Yellow = Y
Chose from 5 colours or mixed pack (2 of each)
29See page 12 for Self-adhesive Ticket Holder
Document Display
The self-adhesive Frames4docs have a permanent, aggressive adhesive that has been selected to adhere to most sealed surfaces. This design allows for documents to be easily changed when required.
Ref To Hold Document Size Pack SFD2/10 A2 10 SFD3/10 A3 10 SFD4/10 A4 10 SFD5/10 A5 10
Self-adhesive
Watch the video:
Self-adhesive
Sealed or ferrous
metal surface
Frame profile
Self-adhesive or magnetic
Document
Frame
Please confirm colour choice when ordering: Blue = B / Black = BK / Green = G / Red = R / Yellow = Y
Suitable for a range of uses
A5
A4
A3 A2
26
316
436
A range of document pockets to suit most environments with magnetic or self-adhesive fixings. Also available as clip on and tie on to suit wire bins and cages.
The adhesive pockets are supplied with an aggressive adhesive tape along the top and bottom edge (A7 pocket has tape along the top edge only) for a permanent fixing.
The magnetic pockets are supplied with a magnetic strip along the top, so that they can be simply lifted and relocated when necessary.
Tie-on pockets can secure around a maximum diameter of 60mm, whilst clip-on pockets are ideal for use on wire bins and cages.
Keeps documentation clean
A3 Vertical
Suits A3-A7 inserts in vertical & horizontal formats
Industrial quality pockets with welded edges
Ideal for relocating on steel surfaces Permanent fixing
A3 Horizontal
436
316 A3 A3
Magnetic PocketsMagnetic Pockets Self-adhesive PocketsSelf-adhesive Pockets
30
Industrial Strength Clear Pockets
See page 14 for Magnetic Label Holder
Document Pockets
Watch the video
Ref Size (mm h x w) Suits Paper Size Pack MP1122/10 110 x 215 - 10 MP1111/10 110 x 110 - 10 MP3H/10 316 x 436 A3 10 MP3V/10 436 x 316 A3 10 MP4H/10 215 x 310 A4 10 MP4H/50 215 x 310 A4 50 MP4V/10 310 x 220 A4 10 MP4V/50 310 x 220 A4 50 MP5H/10 155 x 230 A5 10 MP5H/50 155 x 230 A5 50 MP5V/10 215 x 160 A5 10 MP5V/50 215 x 160 A5 50 MP6H/10 110 x 155 A6 10 MP6V/10 150 x 110 A6 10 MP7H/100 60 x 110 A7 100
Ref Size (mm h x w) Suits Paper Size Pack AP1122/10 110 x 215 - 10 AP1111/10 110 x 110 - 10 AP3H/10 316 x 436 A3 10 AP3V/10 436 x 316 A3 10 AP4H/10 215 x 310 A4 10 AP4H/50 215 x 310 A4 50 AP4V/10 310 x 220 A4 10 AP4V/50 310 x 220 A4 50 AP5H/10 155 x 230 A5 10 AP5H/50 155 x 230 A5 50 AP5V/10 215 x 160 A5 10 AP5V/50 215 x 160 A5 50 AP6H/10 110 x 155 A6 10 AP6V/10 150 x 110 A6 10 AP7H/100 60 x 110 A7 100
A4 Vertical A4 Horizontal A5 Horizontal A5 Vertical A6 Horizontal
A7 Horizontal 1122 Horizontal 1111 Vertical
A6 Vertical
Clip accepts maximum diameter of 8mm
Clip-on PocketsClip-on Pockets Tie-on PocketsTie-on Pockets
Secures around maximum diameter of 60mm
110
60 110
110
215
110
11015
0
155
110
230
155
160
215
310
215 A4
220
310 A4
A5 A5 A6
A6
Pockets shown are not to scale Dimensions in mm
Horizontal = Landscape Vertical = Portrait
31See page 16 for Wire Shelving Clip Holder
Document Pockets
Ref Size (mm h x w) Suits Paper Size Pack CP1122/10 110 x 215 - 10 CP1111/10 110 x 110 - 10 CP4H/10 215 x 310 A4 10 CP4V/10 310 x 220 A4 10 CP5H/10 155 x 230 A5 10 CP5V/10 215 x 160 A5 10 CP6H/10 110 x 155 A6 10 CP6V/10 150 x 110 A6 10 CP7H/100 60 x 110 A7 100
Ref Size (mm h x w) Suits Paper Size Pack TP1122/10 110 x 215 - 10 TP1111/10 110 x 110 - 10 TP4H/10 215 x 310 A4 10 TP4V/10 310 x 220 A4 10 TP5H/10 155 x 230 A5 10 TP5V/10 215 x 160 A5 10 TP6H/10 110 x 155 A6 10 TP6V/10 150 x 110 A6 10 TP7H/100 60 x 110 A7 100
26 32
Magnetic Wrap-around Pockets
See page 8 for Hanging Markers
Document Pockets
Hanging Pockets
Full Adhesive Backed Pockets
Designed for industrial roll cages or mesh containers
Manufactured from tough plastic
Available from stock
New longer headers suit trolley handles
Three hard wearing information pockets in sizes A4, A5 and A6 which have a unique looped magnetic header that is designed to wrap around the mesh of a cage.
A special flap shields the opening of each pocket providing your document with protection from the elements.
Ref Size (mm h x w) Pack WRP4V/10 297 x 210 10 WRP5H/10 148 x 210 10 WRP6H/10 105 x 210 10 WRP4V/50 297 x 210 50 WRP5H/50 148 x 210 50 WRP6H/50 105 x 210 50
Two information pockets manufactured in tough plasticUnique hooked header design Available from stock
Ref Size (mm h x w) Pack WCP4H/10 210 x 297 10 WCP5H/10 155 x 220 10 WCP4H/100 210 x 297 100 WCP5H/100 155 x 220 100
Accepts A4 , A5 & A7 inserts
Adheres to any flat surface
Clear front allows barcodes to be scanned
A4, A5 and A7 size Document protection pockets for keeping information in the office, factory and warehouse environments. These clear pockets protect documents from dirt and grime. Simply peel of the adhesive backing sheet and adhere to a flat surface.
Ref Size (mm h x w) Document Size Pack AW4H/50 217 x 302 A4 Horizontal 50 AW4V/50 302 x 217 A4 Vertical 50 AW5H/50 158 x 219 A5 Horizontal 50 AW5V/50 219 x 158 A5 Vertical 50 AW7H/50 80 x 115 A7 Horizontal 50
AcceptsA4
inserts
AcceptsA6 inserts
AcceptsA5 inserts
Fits around maximum diameter of 30mm
Our premium hanging pocket features a unique hooked header, designed to hang and grip onto the edge of an industrial wooden case. This pocket offers a dual function, to either store documents linked to the case or to provide identification where a conven-tional label will not adhere to the wooden surface. The hanging pocket is also suitable for trolleys, stillages, pallet converters and many more items that have a hanging rail of up to 25mm maximum thickness.
Suitable for use on whiteboards & planning boards, etc
5 sizes & 5 colour choices
1m permanent self-adhesive
A ruler that never gets lost
For bench top, racking or drawing board
easily cut to size if required
Ref Size (mm diameter) Qty per pack MM10 10 100 MM20 20 100 MM25 25 100 MM30 30 100 MM36 36 100
Our memo magnets are suitable for use on whiteboards and any other steel surface throughout the warehouse, office or school area. They are available in 5 different diameters and in single or mixed colour packs.
Available in: White (W), Red (R), Green (G), Blue (B) & Yellow (Y) or alternatively in Mixed packs (M) of 20 of each colour. Please add colour ref to code when ordering.
For use with inkjet printers
Versatile magnetic paper
Available in a choice of matt or gloss finish
Standard thickness 0.25mm
Ref Description Qty per pack MPM10 Matt A4 Paper - White 10 MPG10 Gloss A4 Paper - White 10
Magnetic Paper
Print directly onto this special inkjet coated magnetic paper to produce your own magnetic notices, pictures or labels etc. Supplied in packs of 10 A4 sized sheets. These represent an economical and versatile method of printing. Once your item has been printed the sheets are easily cut/trimmed to the size or shape required.
A4 die cut sheets
Magnetic tiles for early learning years
Ref Description Tiles per sheet Tile height (mm) M1PW Phonetic Set 128 25 M1PW Word Set 114 15
Ref Size (mm h x w) Qty per pack RUL1 40 x 1,000 (1m) 1
Magnetic Tiles for Early Learning Years
Self-adhesive Ruler
Sets of magnetic words and phonetics to help assist every child achieve their maximum learning potential. Ideal for use on magnetic boards. Each set is supplied on a die cut A4 sheet with bold black characters on a white background.
33See page 19 for Magnetic Self-adhesive Strip
Magnetic Accessories
Memo Magnets
Easy to fix, easy to remove
Hard-wearing & re-usable
Helps waste segregation
Easy collection of waste
Please specify design when ordering
Ref Size (mm h x w) Qty per packRSB1 1000 x 920 1 RSB5 1000 x 920 5 RSB10 1000 x 920 10
Waste management problems are easily solved with the racksack. Suitable for most warehouse racking systems, the racksack quickly fixes to the end of your racking frame.
The racksack is designed for most racking and shelving systems between 900mm and 1100mm. Once full, racksacks can be removed and emptied with ease.
The racksack has been thoughtfully developed so that it will not intrude into valuable warehouse space. When hung it has a large open mouth to easily receive waste, yet its tapered design enables it to hardly encroach into the floor area.
Originally designed for the warehouse the racksack’s flexible method of ‘S’ locator fixing means it can be can be hung over or hooked onto any substrate. That’s why the racksack has quickly established itself a place in other industrial areas such as factories, offices or anywhere where waste has become a problem.
Made from tough waterproof polyester the racksack can adequately withstand the rigours of an industrial environment.
Three strong handles are woven into the edge of the sack, one on each side for carrying and one on the base, so that the sack can be easily tilted from the base and emptied.
There are 14 design options available, 13 printed waste segregation options plus a completely blank sack. Dimensions 1000mm high x 920mm wide
Large waste capacity
Handles at the sides & base are double stitched to tough woven polyester
26 34 See page 22 for Floor Graphic Markers
Warehouse Recycling
35See page 46 for Custom Printed Signs
Warehouse Recycling
Available in a range of colour coded designs Alternative prints available on request which can incoporate company names and logos
End of aisle location
GW White MP Blue P Red
E Magenta GL TurquoiseA White WT BrownM White BM Brown BK Blank
SW RedPS Red
BLANK
ShrinkWrap
Electrical Glass
PlasticOnly
Mixed Paper& Card
GeneralWaste
PlasticStrapping
BuildingMaterial
C Blue MR Green
CardboardMixed
Recycling
MetalWood
& TimberAluminium
Watch the video
26 36
Pick Bin Flexi Identification Pockets
See page 17 for Location Markers
Bin & Trolley Identification
Highlight stock shortages
Helps eliminate picking errors
Ref Size (mm h x w) Qty per packFP1211/100 120 x 110 100
A simple system of identification for picking bins, that will save time and money and help eliminate those costly picking errors.
Each pocket size 120x100mm wide (internal size 110x95mm wide) has a unique self-adhesive hinge along the top edge.
This hinge is adhered to the underside of the bin, directly above that to be identified.
The pocket label can have a barcode incorporated, and even a picture of the component to be picked. Two labels can be used, so that when the bin is empty, the labels are reversed, highlighting that the component is out of stock. Labels not included, contact the sales office for further details.
Designed for the tote bin information panel
White polypropylene laminated labels 78 x 72mm wide
Sequential numbering
These tough scratch resistant labels have a permanent adhesive and are supplied in quantities of 1000 upwards. They are printed with your data and laminated for protection. The design of the labels can include barcodes.
Ideal for order picking
Accepts A4 and A5 landscape inserts
Clear front allows barcodes to be scanned
Ref Size (mm h x w) Qty per pack ColourSHP4/W 235 x 320 10 WhiteSHP4/Y 235 x 320 10 Yellow SHP5/W 175 x 230 10 White SHP5/Y 175 x 230 10 Yellow
Styrene Hanging Pockets
Our Styrene Pockets are available in two sizes, either A4 or A5 landscape formats and are ideally suited for hanging onto rails of trolleys or pallets up to a maximum rail width of 25mm.
Printed inserts available
Alternative sizes are available, contact our sales office for further details
Both sizes are available in white and yellow,please specify when ordering
Please call to obtain best prices
Non standard sizes are available on request
Tough Scratch Free Tote Bin Labels
37See page 21 for Floor Signals
Pallet Protection
Can be used with either strapping or shrink wrap
Helps to reduce damage by preventing double stacking
Highly visible printed graphics
Transporting palletised loads from one destination to another by road haulier can be a hazardous business. Once collected from your warehouse, your consign-ment is likely to be off loaded at a number of depots before reaching its final destination. A clear warning sign is what’s required, to prevent another pallet from being stacked on top of your load during its travels.
With this is mind Pallet Topper, a pyramid shaped warning sign is designed to sit on top of a pallet, highlighting the fact that other pallets must not be stacked on your consignment. The clever design of Pallet Topper enables it to be firmly secured to the pallet strapping either during or after it has been strapped. Where a pallet is covered in clear stretch wrap, Pallet Topper can happily be wrapped inside the film, but still remains highly visible. The Pallet Topper is printed with both clear and easily understandable red and green graphic illustrations, but with no text, meaning regardless of your consignments destination all nationalities will easily understand the warning message portrayed. Pallet Topper provides a cost effective solution to what could be a very costly problem.
Manufactured from pre-creased cardboard, which is easily folded and slotted together. Pallet Topper is 170 x 170 x 150mm high and is supplied in packs of 100 pieces.
Secures onto pallets to prevent stacking
Pallet Topper
Ref Size (mm h x w x l) Pack SKS/100 150 x 170 x 170 100
170mm
150m
m
26 38 See page 18 for Wet Wipe Marker Pens
Floor Marking
Helps to quickly identify hazards & obstaclesHi-lights & delineates areas within the factory or car park
Large 750ml cans
Hand held & wheeled applicators available
Re-usable
Flexible PVC sheets
Compete sets of 0-9 & A-Z
Ref Description Pack FMP/Y Yellow line marking paint 12 FMP/W White line marking paint 12 FMP/R Red line marking paint 12 FMP/G Green line marking paint 12 FMP/B Blue line marking paint 12 FMP/O Orange line marking paint 12 FMP/BK Black line marking paint 12 FMP/2W 2 wheel applicator 1 FMP/4W 4 wheel applicator 1 FMP/H Hand held applicator 1
Ref Description Pack STEN25 25mm high Stencil kit 0-9, A-Z 1 STEN50 50mm high Stencil kit 0-9, A-Z 1 STEN75 75mm high Stencil kit 0-9, A-Z 1 STEN100 100mm high Stencil kit 0-9, A-Z 1 STEN150 150mm high Stencil kit 0-9, A-Z 1 STEN200 200mm high Stencil kit 0-9, A-Z 1 STEN300 300mm high Stencil kit 0-9, A-Z 1
Marking Paint
Letter & Number Stencils
Our comprehensive range of floor marker paints, applicators and stencil kits will help you to mark out areas within the factory, warehouse or car park environment.
Paint colours available: Yellow, White, Red, Green, Blue, Orange & Black
FMP/4W FMP/2W FMP/H
39See page 23 for Message Markers
Floor Marking
Stencils
Available in 4 sizes
Quality re-usable stencils
Saves valuable time
Our stencils are manufactured from a rigid PVC film, each one is laser-cut for accuracy, with a transparent anti-glare finish which is naturally scratch resistant. If properly cared for, our stencils can be used again and again making them not only very economical but quick and easy to use saving valuable time compared to other methods of marking.
Quick & easy to use
Other designs & specials are available on request
1 Keep Clear 2 No Parking 3 Disabled
4 Visitor/Reserved 5 Private Parking 6 Arrow
7 Fragile This Way Up 8 Fragile 9 Walking Man 10 Feet
Ref Description Size (mm h x w) Pack ST193/1 190 x 300 1 ST304/1 300 x 400 1 ST406/1 400 x 600 1 ST608/1 600 x 800 1 ST193/2 No Parking 190 x 300 1 ST304/2 No Parking 300 x 400 1 ST406/2 No Parking 400 x 600 1 ST608/2 No Parking 600 x 800 1 ST193/3 190 x 300 1 ST304/3 300 x 400 1 ST406/3 400 x 600 1 ST608/3 600 x 800 1 ST193/4 190 x 300 1 ST304/4 ed 300 x 400 1 ST406/4 400 x 600 1 ST608/4 600 x 800 1 ST193/5 Parking 190 x 300 1 ST304/5 300 x 400 1 ST406/5 400 x 600 1 ST608/5 600 x 800 1 ST193/6 190 x 300 1 ST304/6 300 x 400 1 ST406/6 400 x 600 1 ST608/6 600 x 800 1 ST193/7 300 x 190 1 ST304/7 400 x 300 1 ST406/7 600 x 400 1 ST608/7 800 x 600 1 ST193/8 300 x 190 1 ST304/8 400 x 300 1 ST406/8 600 x 400 1 ST608/8 800 x 600 1 ST193/9 300 x 190 1 ST304/9 400 x 300 1 ST406/9 600 x 400 1 ST608/9 800 x 600 1 ST193/10 300 x 190 1 ST304/10 400 x 300 1 ST406/10 600 x 400 1 ST608/10 800 x 600 1
Keep Clear
No Parking
Disabled
Visitor/Reserved
Private Parking
Arrow
Fragile This Way Up
Fragile
Walking Man
Feet
26 40
Floor Marking Tape - 50mm Wide
See page 33 for Self-adhesive Ruler
Floor Marking
Tough, durable self-adhesive tapes
Highlights hazards or restricted areas
Easy to use applicator available
Ref Size (h x w) Pack Colour LMT/B 50mm x 33m 1 Blue LMT/G 50mm x 33m 1 Green LMT/R 50mm x 33m 1 Red LMT/W 50mm x 33m 1 White LMT/Y 50mm x 33m 1 Yellow LMT/BY 50mm x 33m 1 Black/Yellow LMT/GW 50mm x 33m 1 Green/White LMT/RW 50mm x 33m 1 Red/White
Our range of lane marking tapes can be used to mark stairways, colour code walkways, workstation or storage areas within stores and warehouses.
Floor Lane Marking Tape is available in 4 colours:
Green, Red, White and Yellow
Black/Yellow Highlights general hazard areas and obstaclesRed/White Highlights fire protection equipmentGreen/White Highlights medical stores/safety equipment
Available in a range of colours with general uses:
Extra wide – 75mm rolls
High visibility demarcation
Ref Size (h x w) Pack Colour LMT75/G 75mm x 33m 1 Green LMT75/R 75mm x 33m 1 Red LMT75/W 75mm x 33m 1 White LMT75/Y 75mm x 33m 1 Yellow
Floor Lane Marking Tape - 75mm wide
Manufactured from the same exacting standards as the 50mm wide, this extra wide lane marking tape will help delineate walkways and other areas within the workplace.
Easy to apply tapes without the necessity to bend down
Ensures accurate & quick delineation of areas
Accepts tapes up to 100mm wide
Ref Description Pack FTA1 Tape Applicator 1
Lane Marking Applicator
41See page 18 for Matt Black Magnetic Strip
Anti-slip Flooring
Tough, durable & long lastingQuick & easy to apply anti-slip tape
Available in various widths and coloursSupplied in 18.3m rolls
Our anti-slip tape is manufactured through a unique process ensuring it’s one of the most effective anti-slip surfacing available. Our tapes have a thick carrier impregnated with diamond hard aluminium oxide making it hardy, tough, durable and long lasting. The backing has a heavy coating of perma-nent pressure sensitive adhesive which is water resistant and ensures once it’s down, it stays down.
Available in 4 colour options
Ref Size (h x w) Colour AST25 25mm x 18.3m Black, Yellow, Black/Yellow, ClearAST50 50mm x 18.3m Black, Yellow, Black/Yellow, ClearAST100 100mm x 18.3m Black, Yellow, Black/Yellow, ClearAST150 150mm x 18.3m Black, Yellow, Black/Yellow, Clear
Supplied in packs of 5Anti-slip stair treads - plain or printed
Anti-slip Stair Treads
Our anti-slip treads are manufactured using the same high standard as our anti-slip tape and are ideally suited for use on stair treads or anywhere where the regular shape is required. Available in plain black or black and yellow with “Caution” and “Watch your step” messages printed onto the material. We can offer your own message to be printed, please enquire for further details.
Industrial strength adhesive & anti-slip properties
Anti-slip foot prints for marking out safe pedestrian routes
Supplied in packs of 10, 5 right & 5 left3 different designs to choose from
Anti-slip Feet
Please specify colour when ordering
Anti-slip Tapes
Ref Description Symbol Size (mm hxw) ColourASF/BK Standard 240 x 90 Black ASF/CL Foot 240 x 90 Clear ASF/YE 240 x 90 Yellow ASFY/B 240 x 90 Yellow/Black ASFTL/BK Foot with 210 x 120 Black ASFTL/YE Toes 210 x 120 Yellow ASFS/BK Small Foot 104 x 57 Black ASFS/YE with Toes 104 x 57 Yellow
Ref Size (mm h x w) Pack ColourAST 150 x 610 5 BlackAST/Caution 150 x 610 5 Black/YellowAST/Step 150 x 610 5 Black/Yellow
Our anti-slip feet are ideal for creating marked pedestrian routes that also have the advantage of making a terrific anti-slip surface. Available in a choice of designs; standard, footprint, footprint with toes and small footprint with toes are ideal for environments that include children.
Indoor & outdoor materials available
Quality tie on industrial tags
2 part – perforated tags available
Highly visible identification
Our quality industrial tags are suitable for indoor and one for outdoor use, in a wide range of applications throughout the warehouse and factory. Available immediately from stock in quantities of 100 they ensure accurate stock and inventory control.
SIT/129 SIT/130 SIT/132 SIT/133
Bespoke tags in various sizes can be supplied printed on one or two sidesPlease contact the sales office for further details.
Ideal for harsh environments
Bespoke metal or plastic tags
Suits products & items that are difficult to label
Metal & Plastic Tags
Our industrial quality tags are ideal for marking products that are difficult to label. Available in metal or plastic, in various sizes and colours and printed to your design. The tags are suitable for use in harsh environments with plastic particularly suited to outdoor use. Tags can be sequentially numbered, barcoded or stamped to your design.
Metal tags are impervious to oil, grease, high temperature and exposed conditions and can be supplied with different finishes such as lacquered, embossed, paper covered and paper faced.
Please contact the sales office for prices & further details.
Ref Description Size (h x w) Pack Colour SIT/126 Approved 120 x 60 100 Green SIT/127 Rejected 120 x 60 100 Red SIT/128 Repair/Service 120 x 60 100 Light Yellow SIT/129 Stock identity 146 x 73 100 Yellow (Indoor use)
SIT/130 Stock identity 146 x 73 100 White (Outdoor use)
SIT/131 Good received 146 x 73 100 Orange (1 part)
SIT/132 Good received 146 x 73 100 White/Yellow (2 part)
SIT/133 Numbered stock 146 x 73 100 Green/Blue/Red control (2 part perforated) /Yellow (Please specify)
SIT/134 String ties 250 100 SIT/135 Wire ties 250 100
mm
26 42
Industrial Tags
See page 32 for Full Adhesive Backed Pockets
Industrial Tags
43See page 32 for Magnetic Wrap around Pockets
Signage & Labelling
Due to the inherent weight, size and loads that modern day racking can attain, they must be checked regularly to ensure the safety of staff and visitors in the vicinity. Our racking tag holders are designed to be fixed to the crossbeams of the racking and display a racking safety message.A checklist on the racking insert describes the checks which must be made to the racking with a space for the inspection details to be recorded. An area is available for completion should intermediate work be required, whereas the insert should be removed totally if the racking is deemed unsafe to display the ‘Do Not Use, Unsafe Racking’ message.
All ladders should be checked daily prior to use for any damage faults or wear and tear. In addition they should be inspected at defined intervals as part of a risk assessment programme. Use these inserts to manage the identification, safety and maintenance of ladders and help conform to the Work at Height Regulations 2005.The Asset Tag Holder should be permanently fixed to the ladder in a suitable safe place. Perform an inspection of the ladder (a checklist is printed on the reverse) and record the result on the tag. If the ladder fails the inspection, remove insert and inform a supervisor.
Our universal Equipment Inspection record assists an employer to comply with legislative requirements to inspect and maintain equipment at suitable periods as deemed appropriate by risk assessment. The insert has clearly defined areas to record equipment identification or reference numbers, alongside an inspection record. This allows a user instant access to important safety information.Should equipment fail inspection for any reason, the tag can be removed to clearly display the message ‘Do No Use This Equipment’ which is printed on the border.
Ladder Safety
Equipment Safety
Racking Safety
Safety message if tag is removed
Ref Description Size (mm h x w) Pack TG09 Single insert 75 x 180 1 TG09/10 Inserts 75 x 180 10 TG09/50 Inserts 75 x 180 50 TG09/BOX Box Kit 20 inserts, 10 holders, 1 pen TGRK5 Holders 80 x 210 5
Ref Description Size (mm h x w) Pack TG04 Single insert 180 x 50 1 TG04/10 Inserts 180 x 50 10 TG04/50 Inserts 180 x 50 50 TG04/BOX Box Kit 10 inserts, 10 holders, 1 pen TG0T5 Holders 210 x 55 5
Ref Description Size (mm h x w) Pack TG05 Single insert 180 x 50 1 TG05/10 Inserts 180 x 50 10 TG05/50 Inserts 180 x 50 50 TG05/BOX Box Kit 10 inserts, 10 holders, 1 pen TG0T5 Holders 210 x 55 5
Safety message is displayed if empty
Safety message is displayed if empty
Box Kit consists of 10 holders, 20 inserts and 2 pens.
Fixings not supplied - see page 19 for Magnetic Self-adhesive Tape and Double Sided AdhesiveTape.
Fixings not supplied - see page 19 for Magnetic Self-adhesive Tape and Double Sided AdhesiveTape.
Fixings not supplied - see page 19 for Magnetic Self-adhesive Tape and Double Sided AdhesiveTape.
Hazard Signs A range of signs designed to alert and warn of a potential danger
26 44
Mandatory Signs A range of signs designed to give specific instructions that must be carried out
See page 25 for Consecutive Number Tiles
Safety Signs
Supplied in rolls of 1,000 labels
Ref Size S13840 300 x 200 R13841 300 x 200
Ref Size S11454 300 x 200 R11455 300 x 200
Ref Size S11442 300 x 200R11443 300 x 200
Ref Size S11426 300 x 200 R11427 300 x 200
Ref Size S11446 300 x 200 R11447 300 x 200
Ref Size R12405 600 x 800
Ref SizeS11163 50 x 75R11164 50 x 75
Ref Size S11434 300 x 200 R11435 300 x 200 S11436 600 x 400 R11437 600 x 400
Ref Size S11195 300 x 200 R11196 300 x 200 S11197 600 x 400 R11198 600 x 400
Ref Size S11131 300 x 200 R11132 300 x 200 S11133 600 x 400R11134 600 x 400
Ref Size S11113 300 x 200 R11114 300 x 200 S11115 600 x 400 R11116 600 x 400
Ref Size S11039 300 x 200 R11040 300 x 200 S11041 600 x 400 R11042 600 x 400
Ref Size S11177 300 x 200 R11178 300 x 200
Ref Size S11175 300 x 200 R11176 300 x 200
Ref Size S11235 400 x 300 R11236 400 x 300
Ref Size S11029 300 x 200 R11030 300 x 200
Ref Size S11462 300 x 200 R11463 300 x 200
Ref Size S11414 300 x 200 R11415 300 x 200
Ref Size S11418 300 x 200 R11419 300 x 200
Ref Size S11324 100 x 100 R11325 100 x 100
Ref Size S11340 100 x 100 R11341 100 x 100
Ref Size S11480 300 x 100 R11481 300 x 100 S11482 300 x 200 R11483 300 x 200
Ref 4701
Ref SizeS11161 50 x 75R11162 50 x 75
Ref 4710
Packing Labels
Dimensions in mm (hxw) Codes starting with S = Self-adhesive Vinyl / R = Rigid Plastic
Ref Size13868 150 x 100
Ref Size13871 150 x 100
Ref Size 13873 150 x 100
45See page 33 for Magnetic Paper
Safety Signs
No Smoking & Prohibition A range of popular No Smoking & Prohibition warning signs
Fire Exit & Safe Condition A range of signs designed to indicate safe exit routes, safe location & safety equipment
Ref Size S12096 150 x 400 R12097 150 x 400 P12413 150 x 400
Ref Size S12000 150 x 400 R12001 150 x 400 P12410 150 x 400
Ref Size S12128 150 x 300 R12129 150 x 300 P12419 150 x 300
Ref Size S12132 200 x 450 R12133 200 x 450
Ref Size S12140 100 x 600R12141 100 x 600
Ref Size S12042 300 x 200R12043 300 x 200
Ref SizeS12048 300 x 200R12049 300 x 200
Ref SizeS12028 200 x 300R12029 200 x 300S12030 400 x 600R12031 400 x 600
Ref Size S12092 150 x 400 R12093 150 x 400 P12411 150 x 400
Ref Size S12104 150 x 400 R12105 150 x 400 P12414 150 x 400
Ref SizeS12306 202 x 82R12307 202 x 82
Ref SizeS12310 202 x 82R12311 202 x 82
Ref SizeS12308 202 x 82R12309 202 x 82
Ref SizeS12326 300 x 200R12327 300 x 200
Ref SizeS12322 300 x 200R12323 300 x 200Ref Size
S12304 202 x 82R12305 202 x 82
Ref SizeS11808 150 x 100R11809 150 x 100S11810 300 x 200 R11811 300 x 200S11812 600 x 400 R11813 600 x 400
Ref Size S11840 100 x 100 R11841 100 x 100 S11842 200 x 200 R11843 200 x 200 S11844 400 x 400 R11845 400 x 400
Ref Size S11630 300 x 200 R11631 300 x 200 S11632 400 x 600 R11633 400 x 600
Ref Size S11600 300 x 200 R11601 300 x 200S11602 400 x 600 R11603 400 x 600
Ref SizeS0587 50 x 50S0588 100 x 100
Ref SizeS0585 50 x 50S0586 100 x 100
Ref Size S11626 300 x 200R11627 300 x 200S11628 600 x 400 R11629 600 x 400
Ref Size S13330 300 x 200 R13331 300 x 200 S13332 600 x 400 R13333 600 x 400
Ref Size S11634 300 x 200 R11635 300 x 200
Ref Size S11627 300 x 200 R11673 300 x 200 S11674 600 x 400 R11675 600 x 400
Pre-cut CirclesText packs of pre-cut vinyl prohibition symbols
Supplied in packs of 10 Other symbols available
All signs comply with ISO EN 7010
Dimensions in mm (hxw)
Materials:S - Self-adhesiveR - Rigid non-adhesive PVCP - Self-adhesive rigid photoluminescent material
Please contact the sales office with your requirements and our team will get back to you with a competitive quotation and lead time.
26 46
Custom Signs
Custom Stencils
Custom Labels
Lockout Tagout
See page 6 for Angled Aisle Markers
Safety Signs
Screen printing
Our custom sign service is available for all your needs- from the largest of site signs on dibond or aluminium, through to engraved wooden or resin plaques to the smallest dye sublimation certificate, our custom sign service is here to help.
Our sign teams are expert at creating professional signs using a wide range of techniques on a massive range of available materials including:
Our in-house laser cutting machines are capable of cutting a wide range of bespoke stencils.
As well as the usual letter and number sets almost any message or logo can be converted into a stencil format.
Every year large numbers of workers are injured in industrial accidents resulting from the unexpected energisation, start up or release of stored energy. By ensuring that Lockout Tagout procedures are followed the risk of such incidents and accidents can be prevented.One of the most common occurrences of this happening is when an operator unknowingly activates equipment currently undergoing maintenance, causing harm to the operator and/or the maintenance personnel. By physically preventing the operator activating the equipment (Lockout) and highlighting that the equipment is unsafe for use (Tagout) thisaction can be prevented.
With in house design and manufacturing facilities,we can produce roll to roll labels to your specification.
Digital printing - flatbed and rolls
Laser cut acrylic designs
Dye sublimation
Engraving - both laser & CNC router
Pad printing
Hi-visibility graphic floor signs
Short/Long runs
Full colourLaminated
Any size
Any shapeVarious materials
High quality large format printing
Screen printing Digital printing
Laser precision cutting leaves a
sharp crisp edge
Please ask for details of our complete Lockout Tagout range.
Standard Sizes (mm h x w)
900 x 600 1200 x 900 1500 x 1200 1800 x 1200 2000 x 1200
*Please confirm if the size of the board is the overall or internal panel size.
Printed display boards manufactured to your specification
Magnetic coated steel supplied as standard
Professional look – improves your corporate brand image
Range of accessories available
Are you fed up of making do with a standard board? Do you have an idea of a board you would like? If the answer is yes to either of these questions let Beaverswood manufacture the right board for you.
Simply send a sketch of the board required telling us what size* you require (standard and special sizes available), what you want printing, colours and quantity. Once you place an order we will produce artwork and send you a pdf copy for approval before we go into production.
Our printing technology allows for permanent colouring of the whiteboard panel. The ink is heated and fused into the surface of the board, leaving a scratch free surface. The printing allows for extremely accurate graphic reproductions ensuring vivid and bright printing.
Simply send a sketch of the board required
47See page 18 for Magnetic Racking Strip
Information Boards
Magnetic Whiteboards
*Please confirm if the size of the board is the overall or internal panel size.
48
BLS1 Template - Simply photocopy & fax us with your requirements
See page 11 for Warehouse information Labels
BLS1 Template - not to scale. Actual size: 356 x 254 (mm h x w)
BLS1 Template
49See page 32 for Hanging Pockets
BLS5 Template
BLS5 Template - Simply photocopy & fax us with your requirements
BLS5 Template - not to scale. Actual size: 470 x 350 (mm h x w)
50
BLS6 Template - Simply photocopy & fax us with your requirements
See page 38 for Letter & Number Stencils
BSL6 Template - not to scale. Actual size: 297 x 400 (mm h x w)
BLS6 Template
51
Terms & Conditions
Installation - Terms & Conditions
Conditions of Sale
BASIS FOR SALEAll goods sold by The Company are sold subject to these conditions and these conditions shall be the sole terms and conditions of any sale by The Company to the Customer. Terms and conditions on the Customer’s order form or other document or otherwise shall not be binding on The Company. Amendments, variations or additions to the Contract are binding only if confirmed in writing by The Company.
ORDERS AND SPECIFICATIONS2.i Upon receipt of the Customer’s order The Company will confirm price, quantities and estimated delivery date.
2.ii Orders are accepted by The Company subject to the availability of goods for delivery.
2.iii All drawings, photographs, illustrations, performance data, dimensions, weights and other technical information and particulars of the goods are given by The Company in the belief that they are as accurate as reasonably possible but are not to be treated as binding or forming part of the Contract. The Company reserves the right to alter the design and specifications of the goods at any time without notice.
PRICE3.i Prices may be increased where there are increases in the materials prices, or other charges of The Company.
3.ii The price is exclusive of Value Added Tax and all other taxes, duties and expenses in respect of the goods, all of which shall be payable by the Customer.
3.iii Prices are ex-works and do not include delivery unless otherwise advised by The Company.
DELIVERY4.i Any dates stated for despatch or delivery of the goods are approximate only and The Company accepts no liability for loss or damage, either direct, indirect or consequential, resulting from such delay or failure to deliver the goods for any reason.
4.ii Any delay in delivering the goods shall not give any rise to a right by the Customer to treat the Contract as repudiated or to reject the goods.
4.iii If the Customer refuses or fails to take delivery of the goods at the time stated for delivery The Customer shall in addition pay all costs and expenses of such storage and any additional costs of carriage incurred.
4.iv The Customer shall inspect the goods on delivery and shall notify The Company in writing within three (3) days of any shortages or any damage in transit.
4.v The Company will not consider any claims made by the Customer in respect of shortages or damage in transit unless these conditions are observed.
RISK AND TITLE5.i The risk of loss and damage to the goods shall pass to the Customer immediately upon delivery.5.ii Until The Company has been paid in full for all the goods supplied to the Customer, The Company under this Contract, or any other between them and for all other sums due, The Company shall retain legal and beneficial title to the goods which the Customer shall hold as bailie and fiduciary for The Company.5.iii Nothing in this clause shall prevent The Company from suing for the price when due.
WARRANTIES AND LIABILITY6.i The Company warrants that, insofar as they have been manufactured by The Company, the goods will correspond with their specification at the time of delivery and will be free from defects in materials and workmanship for a period of twelve (12) months from the date of delivery. The Company will at its option refund the purchase price of, or repair or replace free of charge, such part of the goods which its examination confirms are defective provided:
6.ii The defect was notified to The Company within three (3) days from the date of delivery, or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure and in any event within (6) months of delivery.
6.iii The defects are not caused by fair wear and tear, neglect, misuse or improper adjustment.
6.iv The Customer has used the goods strictly in accordance with any instructions or recommendations of The Company.
6.v In no circumstance shall the Customer be entitled to reject the goods, delay acceptance or refuse payment of the price.
6.vi Except as expressly provided for in these conditions, all warranties and conditions expressed, implied, statutory or otherwise as to quality or fitness of any of the goods for any particular purpose or of any other kind except as to title are hereby excluded.
6.vii Except in respect of death or personal injury caused by The Company’s negligence, or by the goods being defective and in respect of loss or damage to private property caused by the goods being defective. The Company shall not be liable to the Customer by reason of any representtion, or any implied warranty, condition or other term, or any duty at common law, or under the express terms of the Contract, for any direct, indirect or consequential loss or damage (whether for loss or profit or otherwise), costs expenses or other claims for consequential compensation whatsoever (and whether caused by The Company its employees or agents or otherwise) which arise out or in connection with the supply of the goods to their use or resale by the Customer, except as expressly provided in these conditions.
GOVERNING LAWThe construction, validity and performance of the Contract shall be governed by English Law and the parties shall accept the jurisdiction of the English courts.
Beaverswood products are protected against copying. Copyright c Beaverswood Supply Co. Ltd 01/03/2013
We require unobstructed access to the installationsite from 8.00 a.m to 6.00 p.m each working day of installation.
We require a named Project Manager available to resolve any problems that may arise during the entire installation period.
Any standing time beyond our control will be chargeable.
We reserve the right to refuse an order should a site inspection or other factors reveal unexpected conditions.
We need to be advised of all health and safetyrequirements two weeks prior to the installation date.
In cold store installations, the customer must provide suitable clothing for the installers.
“The Company” is Beaverswood Supply Company Limited
1 5
6
7
2
3
4
Supplied by: