3"

56"

A

SEE NOTE #1

CLOF REAR

AXLE

CURBSIDE VIEW(CURBSIDE BODY SIDE

NOT SHOWN)

4

1

BACK OF CAB

2

42.055CHASSIS FRAME WIDTH

3

1

4

DW REAR VIEW

VIEW SHOWING GM CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN

CHASSIS FRAME

BODY CROSSMEMBERS

4

3

BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)

2

42.055CHASSIS FRAME WIDTH

VIEW SHOWING GM CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN

SW REAR VIEW

DETAIL A SCALE 1 : 6

SEE NOTES #2 AND #3

1/4"

TYPR/S AND C/S

NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.

C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 33506376 CLASSIC II MAIN ASSEMBLY - CM3-98GALSDWHH W/ LH2, FF, WR, QM 1

2 10580130 CM3 92DPSBDW BARE 1

3 10012300 REAR MOUNTING BRACKET, R/S - CM3-98 1

4 10012299 REAR MOUNTING BRACKET, C/S - CM3-98 1

APPROVED BYSCALE

DRAWING NO.CHECKED BYDRAWN BYDATE

IF IN DOUBT- ASK

HANCOCK BLVD. & GERRY ST. READING, PA.

READING TRUCK BODY, LLC

6/15/2012 DAM

1:12

CM3-98GDWMTGINS1 OF 1

CM3-98GD

WMTG

INS

WGB

*

CLASSIC II MAIN ASSEMBLY - CM3-98G SW & DW

CM3 98G SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE

These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''

WEIGHT1957.51 LBS

57" 3"

A

SEE NOTE #1

SEE NOTE #2 AND #3

CLOF REAR

AXLE

CURBSIDE VIEW(CURBSIDE BODY SIDE

NOT SHOWN)

2

1

6

BACK OF CAB

51/4"

TYPR/S AND C/S

REAR VIEW

6

3

1

2

CHASSIS FRAME BODY CROSSMEMBERS

2

3

BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)

5

4

4

DETAIL A SCALE 1 : 6

SEE NOTE #2 AND #3

2

1/4"

TYPR/S AND C/S

C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-108ALSDWMTGINS

NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.

VIEWS SHOWING GM CHASSIS UNDERSTRUCTURE

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 33506366 CLASSIC II MAIN ASSEMBLY - CM3-108ALSDWHH W/ LH2, FF, WR, QM 1

2 10012297 REAR MOUNTING BRACKET, C/S - CM3-108, 132 1

3 10012298 REAR MOUNTING BRACKET, R/S - CM3-108, 132 1

4 10061276 MOUNTING SHIM, CM3 GM CHASSIS MOUNTING 25 10580130 CM3 92DPSBDW BARE 1

APPROVED BYSCALE

DRAWING NO.CHECKED BYDRAWN BYDATE

IF IN DOUBT- ASK

HANCOCK BLVD. & GERRY ST. READING, PA.

READING TRUCK BODY, LLC

6/15/2012 JMG

1:12

CM3-108ALSDWMTGINS1 OF 2

CM3-108A

LSDW

MTG

INS

WGB

*

CLASSIC II MAIN ASSEMBLY - CM3-108ALS SW & DW HH W/ LH2, FF, WR, QM

CM3 108 SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE

These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''

WEIGHT2186.23 LBS

33.945CHASSIS FRAME WIDTH

3

1

2

REAR VIEWSHOWING GMC CHASSIS FRAME

44 34.157

CHASSIS FRAME WIDTH

3

1

2

REAR VIEWSHOWING FORD CHASSIS FRAME

17"

34"CHASSIS FRAME WIDTH

50"

3

1

2

REAR VIEWSHOWING DODGE CHASSIS FRAME

C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-108ALSDWMTGINS

APPROVED BYSCALE

DRAWING NO.CHECKED BYDRAWN BYDATE

IF IN DOUBT- ASK

HANCOCK BLVD. & GERRY ST. READING, PA.

READING TRUCK BODY, LLC

6/15/2012 JMG

1:12

CM3-108ALSDWMTGINS2 OF 2

CM3-108A

LSDW

MTG

INS

WGB

*

CLASSIC II MAIN ASSEMBLY - CM3-108ALS SW & DW HH W/ LH2, FF, WR, QM

CM3 108 SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE

These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''

WEIGHT2186.23 LBS

3"

84"

A

SEE NOTE #1

CLOF REAR

AXLE

CURBSIDE VIEW(CURBSIDE BODY SIDE

NOT SHOWN)

2

1

BACK OF CAB

5

REAR VIEW

3

1

2

VIEWS SHOWING GM CHASSIS UNDERSTRUCTURE

5

CHASSIS FRAME

BODY CROSSMEMBERS

2

3

BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)

5

4

4

DETAIL A SCALE 1 : 6

SEE NOTES #2 AND #3

1/4"

TYPR/S AND C/S

NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.

C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-132ALSDWMTGINS

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 33506367 CLASSIC II MAIN ASSEMBLY - CM3-132ALSDWHH W/ LH2, FF, WR, QM 1

2 10012297 REAR MOUNTING BRACKET, C/S - CM3-108, 132 1

3 10012298 REAR MOUNTING BRACKET, R/S - CM3-108, 132 1

4 10061276 MOUNTING SHIM, CM3 GM CHASSIS MOUNTING 2

5 10580130 CM3 92DPSBDW BARE 1

APPROVED BYSCALE

DRAWING NO.CHECKED BYDRAWN BYDATE

IF IN DOUBT- ASK

HANCOCK BLVD. & GERRY ST. READING, PA.

READING TRUCK BODY, LLC

6/15/2012 DAM

1:12

CM3-132ALSDWMTGINS1 OF 2

CM3-132A

LSDW

MTG

INS

WGB

*

CLASSIC II MAIN ASSEMBLY - CM3-132ALSDWHH W/ LH2, FF, WR, QM

CM3 U-132 DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE

These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''

WEIGHT2490.21 LBS

33.945CHASSIS FRAME WIDTH

REAR VIEWSHOWING GMC CHASSIS FRAME

3

1

2

4 4

34.157CHASSIS FRAME WIDTH

REAR VIEWSHOWING FORD CHASSIS FRAME

31

2

17"

8 19/32"

34"CHASSIS FRAME WIDTH

50"

5"

8 19/32"

7"

REAR VIEWSHOWING DODGE CHASSIS FRAME

31

2

C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-132ALSDWMTGINS

APPROVED BYSCALE

DRAWING NO.CHECKED BYDRAWN BYDATE

IF IN DOUBT- ASK

HANCOCK BLVD. & GERRY ST. READING, PA.

READING TRUCK BODY, LLC

6/15/2012 DAM

1:12

CM3-132ALSDWMTGINS2 OF 2

CM3-132A

LSDW

MTG

INS

WGB

*

CLASSIC II MAIN ASSEMBLY - CM3-132ALSDWHH W/ LH2, FF, WR, QM

CM3 U-132 DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE

These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''

WEIGHT2490.21 LBS

3"

56"

A

SEE NOTE #1

CLOF REAR

AXLE

CURBSIDE VIEW(CURBSIDE BODY SIDE

NOT SHOWN)

4

1

BACK OF CAB

237.724CHASSIS FRAME WIDTH

3

1

4

DW REAR VIEW

VIEW SHOWING FORD CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN

CHASSIS FRAME

BODY CROSSMEMBERS

4

3

BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)

2

37.724CHASSIS FRAME WIDTH

VIEW SHOWING FORD CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN

SW REAR VIEW

DETAIL A SCALE 1 : 6

SEE NOTES #2 AND #3

1/4"

TYPR/S AND C/S

NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.

C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-98FDWMTGINS

ITEM NO. PART NUMBER DESCRIPTION QTY.

1 33506361 CLASSIC II MAIN ASSEMBLY - CM3-98FALSDWHH W/ LH2, FF, WR, QM 1

2 10580130 CM3 92DPSBDW BARE 1

3 10012300 REAR MOUNTING BRACKET, R/S - CM3-98 1

4 10012299 REAR MOUNTING BRACKET, C/S - CM3-98 1

APPROVED BYSCALE

DRAWING NO.CHECKED BYDRAWN BYDATE

IF IN DOUBT- ASK

HANCOCK BLVD. & GERRY ST. READING, PA.

READING TRUCK BODY, LLC

6/15/2012 DAM

1:12

CM3-98FDWMTGINS1 OF 1

CM3-98FD

WMTG

INS

WGB

*

CLASSIC II MAIN ASSEMBLY - CM3-98F SW & DW

CM3 98F SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE

These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''

WEIGHT1954.12 LBS