3"
56"
A
SEE NOTE #1
CLOF REAR
AXLE
CURBSIDE VIEW(CURBSIDE BODY SIDE
NOT SHOWN)
4
1
BACK OF CAB
2
42.055CHASSIS FRAME WIDTH
3
1
4
DW REAR VIEW
VIEW SHOWING GM CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN
CHASSIS FRAME
BODY CROSSMEMBERS
4
3
BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)
2
42.055CHASSIS FRAME WIDTH
VIEW SHOWING GM CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN
SW REAR VIEW
DETAIL A SCALE 1 : 6
SEE NOTES #2 AND #3
1/4"
TYPR/S AND C/S
NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.
C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 33506376 CLASSIC II MAIN ASSEMBLY - CM3-98GALSDWHH W/ LH2, FF, WR, QM 1
2 10580130 CM3 92DPSBDW BARE 1
3 10012300 REAR MOUNTING BRACKET, R/S - CM3-98 1
4 10012299 REAR MOUNTING BRACKET, C/S - CM3-98 1
APPROVED BYSCALE
DRAWING NO.CHECKED BYDRAWN BYDATE
IF IN DOUBT- ASK
HANCOCK BLVD. & GERRY ST. READING, PA.
READING TRUCK BODY, LLC
6/15/2012 DAM
1:12
CM3-98GDWMTGINS1 OF 1
CM3-98GD
WMTG
INS
WGB
*
CLASSIC II MAIN ASSEMBLY - CM3-98G SW & DW
CM3 98G SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE
These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''
WEIGHT1957.51 LBS
57" 3"
A
SEE NOTE #1
SEE NOTE #2 AND #3
CLOF REAR
AXLE
CURBSIDE VIEW(CURBSIDE BODY SIDE
NOT SHOWN)
2
1
6
BACK OF CAB
51/4"
TYPR/S AND C/S
REAR VIEW
6
3
1
2
CHASSIS FRAME BODY CROSSMEMBERS
2
3
BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)
5
4
4
DETAIL A SCALE 1 : 6
SEE NOTE #2 AND #3
2
1/4"
TYPR/S AND C/S
C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-108ALSDWMTGINS
NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.
VIEWS SHOWING GM CHASSIS UNDERSTRUCTURE
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 33506366 CLASSIC II MAIN ASSEMBLY - CM3-108ALSDWHH W/ LH2, FF, WR, QM 1
2 10012297 REAR MOUNTING BRACKET, C/S - CM3-108, 132 1
3 10012298 REAR MOUNTING BRACKET, R/S - CM3-108, 132 1
4 10061276 MOUNTING SHIM, CM3 GM CHASSIS MOUNTING 25 10580130 CM3 92DPSBDW BARE 1
APPROVED BYSCALE
DRAWING NO.CHECKED BYDRAWN BYDATE
IF IN DOUBT- ASK
HANCOCK BLVD. & GERRY ST. READING, PA.
READING TRUCK BODY, LLC
6/15/2012 JMG
1:12
CM3-108ALSDWMTGINS1 OF 2
CM3-108A
LSDW
MTG
INS
WGB
*
CLASSIC II MAIN ASSEMBLY - CM3-108ALS SW & DW HH W/ LH2, FF, WR, QM
CM3 108 SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE
These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''
WEIGHT2186.23 LBS
33.945CHASSIS FRAME WIDTH
3
1
2
REAR VIEWSHOWING GMC CHASSIS FRAME
44 34.157
CHASSIS FRAME WIDTH
3
1
2
REAR VIEWSHOWING FORD CHASSIS FRAME
17"
34"CHASSIS FRAME WIDTH
50"
3
1
2
REAR VIEWSHOWING DODGE CHASSIS FRAME
C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-108ALSDWMTGINS
APPROVED BYSCALE
DRAWING NO.CHECKED BYDRAWN BYDATE
IF IN DOUBT- ASK
HANCOCK BLVD. & GERRY ST. READING, PA.
READING TRUCK BODY, LLC
6/15/2012 JMG
1:12
CM3-108ALSDWMTGINS2 OF 2
CM3-108A
LSDW
MTG
INS
WGB
*
CLASSIC II MAIN ASSEMBLY - CM3-108ALS SW & DW HH W/ LH2, FF, WR, QM
CM3 108 SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE
These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''
WEIGHT2186.23 LBS
3"
84"
A
SEE NOTE #1
CLOF REAR
AXLE
CURBSIDE VIEW(CURBSIDE BODY SIDE
NOT SHOWN)
2
1
BACK OF CAB
5
REAR VIEW
3
1
2
VIEWS SHOWING GM CHASSIS UNDERSTRUCTURE
5
CHASSIS FRAME
BODY CROSSMEMBERS
2
3
BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)
5
4
4
DETAIL A SCALE 1 : 6
SEE NOTES #2 AND #3
1/4"
TYPR/S AND C/S
NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.
C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-132ALSDWMTGINS
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 33506367 CLASSIC II MAIN ASSEMBLY - CM3-132ALSDWHH W/ LH2, FF, WR, QM 1
2 10012297 REAR MOUNTING BRACKET, C/S - CM3-108, 132 1
3 10012298 REAR MOUNTING BRACKET, R/S - CM3-108, 132 1
4 10061276 MOUNTING SHIM, CM3 GM CHASSIS MOUNTING 2
5 10580130 CM3 92DPSBDW BARE 1
APPROVED BYSCALE
DRAWING NO.CHECKED BYDRAWN BYDATE
IF IN DOUBT- ASK
HANCOCK BLVD. & GERRY ST. READING, PA.
READING TRUCK BODY, LLC
6/15/2012 DAM
1:12
CM3-132ALSDWMTGINS1 OF 2
CM3-132A
LSDW
MTG
INS
WGB
*
CLASSIC II MAIN ASSEMBLY - CM3-132ALSDWHH W/ LH2, FF, WR, QM
CM3 U-132 DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE
These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''
WEIGHT2490.21 LBS
33.945CHASSIS FRAME WIDTH
REAR VIEWSHOWING GMC CHASSIS FRAME
3
1
2
4 4
34.157CHASSIS FRAME WIDTH
REAR VIEWSHOWING FORD CHASSIS FRAME
31
2
17"
8 19/32"
34"CHASSIS FRAME WIDTH
50"
5"
8 19/32"
7"
REAR VIEWSHOWING DODGE CHASSIS FRAME
31
2
C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-132ALSDWMTGINS
APPROVED BYSCALE
DRAWING NO.CHECKED BYDRAWN BYDATE
IF IN DOUBT- ASK
HANCOCK BLVD. & GERRY ST. READING, PA.
READING TRUCK BODY, LLC
6/15/2012 DAM
1:12
CM3-132ALSDWMTGINS2 OF 2
CM3-132A
LSDW
MTG
INS
WGB
*
CLASSIC II MAIN ASSEMBLY - CM3-132ALSDWHH W/ LH2, FF, WR, QM
CM3 U-132 DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE
These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''
WEIGHT2490.21 LBS
3"
56"
A
SEE NOTE #1
CLOF REAR
AXLE
CURBSIDE VIEW(CURBSIDE BODY SIDE
NOT SHOWN)
4
1
BACK OF CAB
237.724CHASSIS FRAME WIDTH
3
1
4
DW REAR VIEW
VIEW SHOWING FORD CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN
CHASSIS FRAME
BODY CROSSMEMBERS
4
3
BOTTOM PLAN VIEW(ROADSIDE AND CURBSIDE BODY SIDES NOT SHOWN)
2
37.724CHASSIS FRAME WIDTH
VIEW SHOWING FORD CHASSIS UNDERSTRUCTUREBUMPER NOT SHOWN
SW REAR VIEW
DETAIL A SCALE 1 : 6
SEE NOTES #2 AND #3
1/4"
TYPR/S AND C/S
NOTES:FOLLOW READING'S STANDARD MOUNTING GUIDE 1.LINES FOR GM, FORD, AND DODGE CHASSIS FOR ALL MOUNTING LOCATIONS IN FRONT OF THE REAR AXLE.BOLT (2) BUMPER MOUNTING BRACKETS TO CHASSIS 2.FRAME ROADSIDE AND CURBSIDE USING SUPPLIED HARDWARE AS CALLED OUT IN STANDARD MOUNTING GUIDE.WELD (2) BUMPER MOUNTING BRACKETS, SUPPLIED 3.BY READING TRUCK BODY, TO ROADSIDE AND CURBSIDE BODY UNDERSTRUCTURE.REMOVE ALL WELD SPATTER AND SHARP EDGES 4.AFTER WELDINGREPAINT ANY EFFECTED SURFACES.5.
C:\PDM\RTB\Standards\Standard Models\Classic II Service Body\Dual Wheel\Cranemaster\CM3-98FDWMTGINS
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 33506361 CLASSIC II MAIN ASSEMBLY - CM3-98FALSDWHH W/ LH2, FF, WR, QM 1
2 10580130 CM3 92DPSBDW BARE 1
3 10012300 REAR MOUNTING BRACKET, R/S - CM3-98 1
4 10012299 REAR MOUNTING BRACKET, C/S - CM3-98 1
APPROVED BYSCALE
DRAWING NO.CHECKED BYDRAWN BYDATE
IF IN DOUBT- ASK
HANCOCK BLVD. & GERRY ST. READING, PA.
READING TRUCK BODY, LLC
6/15/2012 DAM
1:12
CM3-98FDWMTGINS1 OF 1
CM3-98FD
WMTG
INS
WGB
*
CLASSIC II MAIN ASSEMBLY - CM3-98F SW & DW
CM3 98F SW AND DW MOUNTING REQUIREMENTS - 3200 LBS CAPACITY CRANE
These drawings and the information and designs contained herein are the property of Reading Truck Body, LLC ("RTB") and are protected by U.S. and foreign copyright, trade secret and other applicable laws. Any copying, reproduction, modification, distribution, public display or disclosure to any person outside of your organization (each, a "Prohibited Action'') of these drawings without the express written consent of RTB is expressly prohibited. RTB will pursue all available criminal and civil remedies in the event of any Prohibited Action or any other action taken in violation of its rights.''
WEIGHT1954.12 LBS