IMPLANTS DIFFUSION - idi-dental.com depth stop drills from Implants Diffusion ... (sinus lift) or crestally. In many cases crestal sinus floor elevation

SinceÊ1987

IMPLANTS DIFFUSION INTERNATIONAL

SinceÊ1987


SinceÊ1987


SinceÊ1987


2017 PRODUCT CATALOGOsteosinus

& Bone substitutes

Since 1987SinceÊ1987


SinceÊ1987


SinceÊ1987


SinceÊ1987


2 www.idi-dental.com

“WE DEVELOP AND MANUFACTURE IN FRANCE”

Since 25 years, IDI firm (Implants Diffusion International), in collaboration with a team of researchers, engineers and dental surgeons, has regularly developped new products intended to implantology.

Implants Diffusion International invests a great deal in the research of new technologies such as RBS drill, state of surface SMA +Tio2,

Osteosinus…

The IDI lines are developped and manufactured in the Paris region, France by professionals fully committed to meet the practitioners expectations. IDI applies a strict Quality policy to each manufac-turing step. The IDI company is certified according

to the applicable standards: ISO 13485, ISO 9001, CE.

The next decade will see the launching of numerous innovations emerging from our Research and Deve-

lopment Department.

Gérard Boukhris - President

The IDI teams, concerned with the trust relationship that they enter into with the practitioners, decided to offer lifetime warranties to all the implant lines of the IDI brand.

Proud of our implant quality, we supply an accurate customer service to assist you in your daily practice in order to meet your highest requirements. The “General conditions” and the warranty protocol may be downloaded from the www.idi-dental.com website, section: Documentations/Quality.IDI puts the customer relationship at the heart of its concerns every day. The IDI teams are regularly trained in the latest cutting-edge techniques and in all the products necessary to the implantologists.

Our product Quality is a key asset to a stress-free practice.

THE QUALITY COMMITMENT OF THE IDI COMPANY / THE LIFETIME WARRANTY

IDI IMPLANTS DIFFUSION INTERNATIONAL 3

Important considerations about IDI SystemTightening torques

PRODUCTS Values(Ncm)

Comments

Implants ≤75 Use the ratchetClosing cap 5 to 10

Use the manual screwdriver*

Healing cap 5 to 10IDUnit : abutment 25IDUnit : retaining screw 15Retaining screw 25Manual screwdriver 5 to 25Screwdriver with dental shank 25 Use the contra angle or the torque wrench*

* Distortion of the screwdriver at 45 N.cm to preserve the implant and its prosthetic component.

!

IDI - Implants Diffusion International - develops, manufactures and distributes the largest range of dental implants all over the world, as well as implantology and dental surgery equipment. IDI products are manufactured in France exclusively. They’re resulting from the essential work of the Research and Development Department. For IDI, to be close to practitioners, hospitals and implantology training centres is a great deal, because they take part to the constant innovation.

Osteosinus& Bone substitutes





OSTEOSINUS /

BONE SUBSTITUTES /

05

4

15

5

The Osteosinus 1 set

Osteosinus

Rectisinus

Angulosinus

Forsinus

Trepanosinus

Diskosinus

Technique by using the Trepanosinus

Technique by using the Forsinus

Bone management

The Osteosinus /

“The Osteosinus system of IDI firm - Implants Diffusion International - is an easy and reliable technique when we want to place an implant in a sinusal area. It permits to each dentist to perform a sinus floor elevation by crestal approach. Drills manufactured for the bone preparation are accute and lasting. The RBS system for the bone harvesting is terrific”

Dr Rainer B. (Germany)

Consistent use of a depth stop over many years when harvesting bone surgically enabled the development of this technique. The technique has proved itself in a wide range of applications for more than fifteen years thanks to the rbs depth stop drills from Implants Diffusion International.

Osteotomes, trephines and drills included in the Osteosinus system have also benefited from this technology.

The Osteosinus concept facilitates sinus floor elevation and ensures that It is stress-free.

Clinical studies have indicated that an intact sinus membrane is essential for successful grafting.

A sinus bone graft can either be harvested laterally (sinus lift) or crestally.

In many cases crestal sinus floor elevation completed with the Osteosinus is a practical alternative to a sinus lift.

Osteosinus, the most advanced technique in crestal sinus floor elevation

Indications for the Osteosinus it is mainly recommended for sinus floor elevation for placing one or two implants.


Non

con

tract

ual p

ictu

res


THE OSTEOSINUS 1 SET

RL 33

RL 43

RL 53

RL 63

RL 73

RL 83

AL 33

AL 43

AL 53

AL 63

AL 73

AL 83

TL 33

TL 43

TL 53

TL 63

TL 73

TL 83

FL 33

FL 43

FL 53

FL 63

FL 73

FL 83

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

Ø 3 mm

LENGTH in mm

LENGTH in mm

LENGTH in mm

LENGTH in mm

P/N

P/N

P/N

P/N

DIAMETER

DIAMETER

DIAMETER

DIAMETER

3

3

3

3

4

4

4

4

5

5

5

5

7

7

7

7

6

6

6

6

8

8

8

8

Osteosinus (osteotome holder)

Diskosinus diameter 3 mm (bladed wheels for enlarging the bone base)

Osteosinus monobloc

Surgical stand

Base plate

P/N OST 1

P/N D3

P/N OSTM

P/N PLS

P/N BIC 1

6 Rectisinus (straight osteotome with colour-coded depth stop)

6 Angulosinus (angled osteotome with colour-coded depth stop)

6 Trepanosinus (trephine drill with colour-coded depth stop)

6 Forsinus (drill with colour-coded depth stop)

Important: The instruments with a 3 mm diameter are used for standard implants (3,5 to 4,4 mm Ø).

OST

EOSI

NUS

www.idi-dental.com

OSTEOSINUSThe Osteosinus is used for attaching a straight or angled osteotome depending on the operating site.

After assembling the osteotome, use the slide mallet to compact the bone.

Removable slide mallet

Can be dismantled

Shock absorber

Locking ring for the osteotome

8

Non

con

tract

ual p

ictu

res






RECTISINUS

ANGULOSINUS

This set contains six straight osteotomes with a colour-coded depth stop, Ø 3 mm, length 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm.

Insert the Rectisinus into the osteotome, position the guide in the operating site and compact the bone using the slide mallet.

This set contains six angled osteotomes with a colour-coded depth stop, Ø 3 mm, length 3-4-5-6-7 and 8 mm.

Insert the angulosinus into the osteotome, position the guide in the operating site and compact the bone using the slide mallet.

Depth stop limits the insertion depth of the osteotome


Colour coding for the depth

stop length


stop length

Colour coding for the

diameter


diameter

Guide for positioning the

osteotome

Guide for positioning the

osteotome

LENGTH

LENGTH

COLOR

COLOR

3

3

4

4

5

5

6

6

7

7

8

8

Lengths and colour-coded table for a 3 mm Ø


OST

EOSI

NUS

www.idi-dental.com

FORSINUS

TREPANOSINUS

This set contains six drills with a bone-harvesting channel and colour-coded depth stop, Ø 3 mm, length 3mm, 4 mm, 5mm, 6mm, 7mm, 8mm.

Use the drill at 150 rpm without water cooling or drill with irrigation at 650 rpm.

This set contains six trephines with a colour-coded depth stop, Ø 3 mm, length 3 mm, 4 mm, 5 mm, 6 mm, 7 mm and 8 mm.

Use the trephine at 70 rpm without water cooling.



stop length


diameter

Bone-harvesting

channel3

3

4

4

5

5

6

6

7

7

8

8




Colour coding for the depth stop length

Colour coding for the diameter

Window for extracting the bone cylinder

10

LENGTH

COLOR

LENGTH

COLOR





Non

con

tract

ual p

ictu

res


OST

EOSI

NUS

DISKOSINUSThis set contains a small bladed wheel, Ø 3 mm (red ring)

The wheel is used after the Forsinus drill with the same diameter. Using a circular movement the bladed wheel enlarges the bone base below the sinus and provides it with increased resilience when using the osteotome.


diameter

Locking ring for the osteotome

1 2

5

3

6

4

www.idi-dental.com

TECHNIQUE BY USING THE TREPANOSINUS

Select a suitable section on the X-ray of the implant site and measure the bone availability (here: 8 mm).

Fill the cavity with the bone substitute.

Remove the trephine.

Place the implant after compacting approx. 2 cubic centimeters of the bone material.

Use a 7 mm long trephine Trepanosinus (red ring on top) with a bone availability of 8 mm.

Continue compacting the bone. The bone material gradually elevates the sinus membrane.

Depending on the composition of the operating site, select a straight or angled 8 mm long Osteosinus (yellow ring on top), attach it and use it to compact the bone cylinder. Sometimes because of a very resistant bone, it is necessary to start compacting with a surgical hammer.

Allow a healing period of approx. 8 months during which osseointegration is completed.

1

5

2

6

3

7

4

8

NB: we recommend checking osseointegration with a scanner before loading the implant.

8mm

12





Non

con

tract

ual p

ictu

res


TECHNIQUE BY USING THE FORSINUS

Select a suitable section on the X-ray of the implant site and measure the bone availability (here: 7 mm)

Attach a 7 mm long osteotome (red ring on top) to the Osteosinus and use the instruments to compact the bone. Sometimes for a very resistant bone, it is necessary to start compacting with a surgical hammer.

Use the diskosinus

bladed wheel, rotating it slowly with a circular movement, to enlarge the bone base below the sinus and provide it which increased resilience.

Then place the implant.

Use the 6 mm long forsinus drill (red ring on top) with a bone availability of 7 mm.

Repeat the procedure until 1,5 to 2 cubic centimeters of bone material has been inserted. This gently elevates the sinus membrane without tearing it.

Fill the cavity with bone material.

Allow a healing period of approx 8 months during which osseointegration is completed.

1

5

2

6

3

7

4

8

NB: we recommend checking osseointegration with a scanner before loading the implant.

7mm

OST

EOSI

NUS

www.idi-dental.com

Ridge spreading condensing

Trephines

- 4 ridge spreaders with gradual diameters : 1,5 – 2 – 2,5 and 3 mm (on the lower edge) 2 – 2.3 – 3.4 and 3.9 mm (under the depth stop)

- Length: 20 mm, round edge- Colour coding for safety purpose - To set all types of implants to 4 mm diameter- Avoid the use of sharp drills on very narrow sites (the periodontal ligament is respected)- For lateral or vertical condensation- Gradual insertion (maximum 5 rpm) always with a 1/64 contra-angle.

Very sharp trephines in surgical stainless steel for bone explantation.Equipped with depth stops and lateral windows for an easy clearing of the recovered bone.

1,5 mm (white)P/N EX15

3,0 mm (green)P/N EX30

2,0 mm (yellow)P/N EX20

2,5 mm (red)P/N EX23

TL 33TL 43TL 53TL 63TL 73TL 83

TL 34TL 44TL 54TL 64TL 74TL 84

Ø 3 mmØ 3 mmØ 3 mmØ 3 mmØ 3 mmØ 3 mm

Ø 4 mmØ 4 mmØ 4 mmØ 4 mmØ 4 mmØ 4 mm

LENGTH in mm

P/NDIAMETER

3

3

4

4

5

5

7

7

6

6

8

8

Depth stop to limit the depth of drilling

Colour coding for the depth stop length

Colour coding for the diameter

Window for extracting the bone cylinder

14

BONEMANAGEMENT

IDBONE Sponge

IDBONE

AT Collagen Membrane

Bone substitutes /

15


“As a result of many years of research, IDI – Implants Diffusion International, in collaboration with practitioners, selected the best performing products for you dedicated to bone filling and bone regeneration: the IDBONE Sponge, the IDBONE and the AT Collagen membrane.”

The IDBONE is a powdered filling material composed of hydroxyapatite. The particular feature of this bone substitute is to have a high porosity that optimizes its bioconductive effect.

The AT Collagen membrane will enable you to obtain an optimal barrier, and may be used in addition to the IDBone.

The IDBONE Sponge – that has the consistency of a ”marshmallow” - draws special attention to itself thanks to its easy-to-use feature. This bone substitute matrix makes any kind of graft being simple to achieve and with reproducible results.

It avoids the additional use of a regeneration membrane. The product consistency enables a perfect adaptation to recipient site as well as a great tightness of the sinus mucosa if it is slightly torn.

These products were tested and validated by a panel of professionals, and guarantee you optimal results.

ImportantThis product was designed and produced in conformance with European regulations (directive, CE labelling) and the applicable international standards.






BON

E SU

BSTIT

UTES

IDBONE Sponge

PRESENTATIONBone tissue is naturally capable of self-remodelling and regeneration. However, in many clinical situations an additional supply of bone substance is required.

IDBONE Sponge which is one of the biphasic ceramics has an optimum degree of compatibility and functionality as well as hydrophilic and handling properties which makes it a material of choice in many applications. IDBONE Sponge technology has been optimised and successfully used in dental and orthopaedic surgeries.

A facilitating bone substitute matrix.

INDICATIONSIDBONE Sponge is indicated for use in bone augmentation and reconstruction:

• Filling of bone defects.• Reconstruction of the alveolar ridge.• In combination with guided tissue regeneration products or guided bone regeneration products for filling bone defects and sinuses in preparation for implants.• In combination with guided bone regeneration products for peri-implant reconstruction.

IDBONE Sponge is a haemostatic, resorbable, osteoconductive bone substitute matrix.

IDBONE Sponge is comprised of a dispersed granular biphasic synthetic bone substitute in a collagen matrix (types I and III).

SEM: IDBONE Sponge bone substitute granule and collagenous matrix.


Size grading & References:– Size grading: 80 - 200 µm

The collagen used is xenogenic and a-cellular. This product presents no risk of prion disease. In addition, the collagen extraction process integrates validated steps for the inactivation of bacteria, viruses and prions.

IDBONE Sponge is developed and patented for several applications.

Product safety

ADVANTAGES• A malleable material that can be cut before use.• Excellent hydrophilic qualities.

The combination of collagen and a biphasic bone substitute:• Collagen enables the creation of a structure: contributes to the migration of cells and the colonisation of all the material.• During collagen breakdown amino acids metabolised by cells, are released.

The unique composition of IDBONE Sponge gives it the following properties:• Dry placement or mixed with physiological saline solution and blood.• Resorption of collagen in 1 month and remodelling of the bone substitute by cells in 3 months.• The stability of the matrix enables it to serve as a support (ex: antibiotic, PRF, etc.).

IDBONE Sponge

Dimensions (mm) References12x12x12 IDBSA24x12x12 IDBSB30x30x6 IDBSC35x60x6 IDBSD

Produced by BIOM’UP, France.






Methodology

Correction of a maxillary bone defect by sinuslift with the use of IDBONE Sponge.

The IDBONE Sponge filling material may be inserted with tweezers; Position it till it is near the edge of the sinus opening previously created.

Realisation of a muco-periosteal flap with anterior oblique vertical incision enabling to expose the canine fossa.

Use a large ball bur (for resin prosthesis) to open the maxilla sinus in its lower part. This enables to see the light-blue sinus mucosa without perforating it.

With a fine excavator, start detaching the sinus mucosa. This detachment is extended both to the lower part and backwards with different shapes and sizes of detachment instruments.

Place a Codman compress, saturated with betadin, allowing to keep the sinus mucosa up. Once the compress is positioned, the implants may be placed.

1 2

3 4

5

Phot

o cr

edits

: Dr D

anie

l GO

LD, m

axillo

faci

al su

rgeo

n, C

lerm

ont-F

erra

nd, F

ranc

e.

The

pict

ures

are

ext

ract

ed fr

om d

iffer

ent c

ases

.BO

NE

SUBS

TITUT

ES


IDBONE Sponge

Clinical applications

Peri-implant fillingIDBONE Sponge can be used in ridge widening (1). IDBONE Sponge is placed in the ridge widening zone (2). The implant is then placed in the zone containing IDBONE Sponge (3). Perfect tissue healing is already visible after 5 months (4).

Apical resectionThe bone cyst is approached from the apical zone (1). After opening the site and getting rid of the inflammatory tissue, the apical extremity of the root and infections is cut. IDBONE

Sponge is placed in the cleaned cavity (2) (3) and will enable filling of the defect caused by the removal of the cyst (4).

Sinus Floor elevation Two types of approaches (crestal and lateral approach)The IDBONE Sponge membrane is placed then introduced in the bone defect under the sinus mucosa (1) (2). IDBONE Sponge is used to fill the bone defect (3). The implant is then placed in the same time as the bone graft (4).

1 2 3 4

1 2 3 4

1 2 3 4


IDBONE

PRESENTATIONIDBONE is a synthetic bone substitute with exceptionally high porosity (90%) and totally interconnected. Thanks to this porosity and its chemical composition (beta-TCP), when implanted in bone, IDBONE is replaced in 6 or 7 months by neoformed bone tissue.

Global IDBONE porosity is close to 90%. Both macroporosity and microporosity are present.The macroporous component is made up of largesized pores (0.2 to 0.5 mm), all interconnected. This interconnected macroporosity allows bone tissue to penetrate into the heart of the biomaterial (osseointegration by osseoconduction).

The next step is the start of the IDBONE bone remodeling process, during which bone cells will be fragmenting and digesting the biomaterial while they produce new bone replacement tissue.

Synthetic bone substitute with high porosity.

INDICATIONSIDBONE is indicated to deal following cases:• Sinus graft.• Bone loss correction.• Filling alveoli.• Periodontology.

IDBONE is entirely composed of beta-TCP.

Beta-TCP, or beta-tricalcium phosphate, belongs to the same chemical family as the mineral substance of bone, so that osseointegration is complete when it is placed in a bone site.

The IDBONE composition is similar to the mineral phase of bone.The IDBONE pores dimension is compatible with the cells of human bone.

The IDBONE has been marketed since 2008 and benefits from a significant clinical background.





ADVANTAGESSecurity: • Synthetic, no infectious - immune risks.• Clinical background.• Ready to use.

Efficiency:• Rapid osseointegration.• Rapid revascularisation to core of graft.• Rapid resorption by neoformed bone remodeling.

BON

E SU

BSTIT

UTES

Produced by Kasios, France.


IDBONE

Size grading & references:IDBONE is packaged in boxes of 5 double cups, (individually sterile).

Bone cores were sampled at D+3 months from the sinuses previously filled with IDBONE.

In all cases, the same degree of bone remodeling was seen (see imagery below). Please note on the second picture the perfect onlay of bone to biomaterial, evidence of its osseointegration.

Histology

Description References PackagingIDBONE 150 - 500 µm(Designed for periodontalindications)

IDB 1501 Box of 5 cups x1 cc sterile

IDBONE 1000 - 2000 µm(Recommended for sinus lift)

IDB 10001 Box of 5 cups x1 cc sterile

Methodology1/ Preparation: Mixture with autologous blood and/or bone. 2/ Application With a spatula into a cavity to fill. 3/ A membrane can be added. 4/ Suture.

1 2 3 4


AT CollagenMembrane IMPLANTS DIFFUSION

INTERNATIONALIMPLANTS DIFFUSION

INTERNATIONAL



PRESENTATIONCollagen reticulated with barrier effect non-allergenic and lyophilized.

The Collagen AT membrane is made of pure, high quality collagen, equine origin, manufactured under a strictly controlled production process according to CE Health Regulations.

Reabsorbable membrane for guided tissue regeneration.

ADVANTAGES• Barrier effect, reabsorption within 180 days. • Adaptability by adhesion to surrounding tissue. • Micro roughness surface that allows the stabilization of the membrane without suture. • Associated with some grafting materials: Hydroxiapatita, lyophilized bone, etc. Optimal barrier effects are obtained. • The product is sterilized by gamma radiation and packaged in a heat-sealed double envelope, therefore guaranteeing its preservation and providing maximum sterilization.

• For Guided Tissue Regeneration in implantology.• For the prevention of post-surgical bone dehiscence. • For use in periodontal surgical procedures.

Indications

Reference:

Dimensions (mm) References Packaging22x22 COLLAGENE AT Box of 6 membranes

(individually packaged)

Clinical case - Example of useSinus Lift with an AT Collagen Membrane.

BON

E SU

BSTIT

UTES

Produced in Italy.

23/25 rue Émile Zola - 93100 Montreuil - FranceTél. : +33 (0)1 48 70 70 48 – Fax : +33 (0)1 48 70 44 58

Find all our implant rangeson our website www.idi-dental.com

SinceÊ1987


SinceÊ1987


SinceÊ1987


SinceÊ1987


Photo credits: Agence G

reen and White &

IDI. Products featured in our catalogue are intended for healthcare professionals - O

ctober 2016 issue. Printed in France. A

ny reproduction for all countries is strictly prohibited without the prior w

ritten permission of the ID

I company. N

on contractual photos and illustrations.

Documents

IMPLANTS DIFFUSION - idi-dental.com depth stop drills from Implants Diffusion ... (sinus lift) or crestally. In many cases crestal sinus floor elevation